Search Results

Search found 2824 results on 113 pages for 'supply chain'.

Page 99/113 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

  • USB mouse disconnecting and reconnecting randomly and often

    - by Marc
    Specs: Q6600, evga 780I sli mobo, 4gig RAM, logitech MX518, windows 7 64bit, evga gtx 260, 650W power supply (single rail) The problem I am having is my mouse will reconnect/disconnect (will even hear the sounds from windows) and the light on the bottom of the mouse will turn off/turn on as it starts working again. It really sucks to be playing a game (and happens on desktop as well) for the mouse to just die out for a few seconds and come back. Sometimes it will not happen for days and other times it will do it 2 or more times within 15 seconds. I have tried two different wired mice, have tried multiple USB ports (on front of computer, back of computer, have also used a USB hub and have also plugged in a card that connects to the USB connectors on the motherboard and adds a few usb ports to the back of the computer, and I also bought a USB 2.0 PCI card and that did not help). Nothing else seems to reconnect like this, my usb keyboard has never once cut out like the mouse does and neither have any of the other devices I have connected (webcam, usb hub, various devices sometimes connected through usb cables, and IR reciever for windows media center remote). I have disconnected all usb devices except for my keyboard and mouse and the problem still occurs. I guess it could be something wrong with my motherboard but since no other devices behave similarly I'm just hoping that it is some kind of driver conflict. Installing logitech's drivers has had no effect. It seemed at first that if I go to device manager and uninstall HID-compliant mouse (that and logitech mx518 are listed) that would fix it but it doesn't seem to work anymore or at least not every time (it keeps reinstalling). I have googled "usb mouse disconnects and reconnects" and it seems to be fairly common but none of those were resolved. To stick some easy steps: It happens with or without the drivers installed It has happened with multiple mice on the same computer Bios is the latest version (P08) Motherboard drivers are the latest version Device manager is listing no problems on any USB devices Happens with every usb port, even addon usb cards Happens when all usb devices aside from mouse and keyboard are unplugged I read that maybe it is an IRQ conflict and I tried to look into that but did not really know what was going on, but didn't see anything obviously wrong. Thanks for any help guys, its driving me crazy!

    Read the article

  • SSD Fresh Does Not Start

    - by Jim Fell
    I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fress from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems. Does anyone know what might be preventing the program from running? I tried shutting down the Spybot Resident and disabling the firewall and virus scanner with no luck. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck. Every time I try to launch the program the Event Viewer logs this same set of errors: Error 4/2/2012 11:35:44 PM Application Error 1000 (100) Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None Error 4/2/2012 11:35:39 PM SideBySide 59 None For those who are interested, here is my system configuration: ASRock M3A770DE AM3 AMD 770 ATX AMD Motherboard AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX G.SKILL Value Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model F3-10600CL9D-8GBNT Mushkin Enhanced Chronos Deluxe MKNSSDCR60GB-DX 2.5" 60GB SATA III Synchronous MLC Internal Solid State Drive (SSD) (Primary/Boot HD) Western Digital Caviar Blue RFHWD1600AAJS 160GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive (Secondary HD) Sony Optiarc CD/DVD Burner Black SATA Model AD-7261S-0B LightScribe Support RAIDMAX RX-850AE 850W ATX12V v2.3 / EPS12V SLI Certified CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card Asus ML228H 21.5" Full HD LED BackLight LED Monitor Slim Design (x3)

    Read the article

  • GeForce 8800GT not even giving basic output

    - by Sam
    My Dad bought a GeForce 8800GT graphics card quite a long time ago now. It has never worked in his PC. Print out from a dxdiag: System Information Time of this report: 4/13/2010, 19:52:40 Machine name: USER-PC Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.091208-0542) Language: English (Regional Setting: English) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: Default System BIOS Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.3GHz Memory: 2046MB RAM Page File: 1045MB used, 3296MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6001.18000 32bit Unicode DxDiag Notes Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. DirectX Debug Levels Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) Display Devices Card name: ATI Radeon HD 2400 PRO Manufacturer: ATI Technologies Inc. Chip type: ATI Radeon Graphics Processor (0x94C3) DAC type: Internal DAC(400MHz) Device Key: Enum\PCI\VEN_1002&DEV_94C3&SUBSYS_00000000&REV_00 Display Memory: 1012 MB Dedicated Memory: 245 MB Shared Memory: 767 MB Current Mode: 1280 x 960 (32 bit) (75Hz) Monitor: Generic PnP Monitor Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll Driver Version: 7.14.0010.0523 (English) DDI Version: 10 Driver Attributes: Final Retail Driver Date/Size: 8/22/2007 02:43:14, 3021312 bytes That info is from the current card that is installed in it and has been installed since its purchase roughly 3-4 years ago. When I physically install the card I put it into a purple slot on the motherboard that the old card was in (if I go into the device manager and select properties on the current card it confirms that the slot is a "PCI Slot 16 (PCI bus 2, device 0, function 0)") and boot up the computer but get absolutely no output. The screen that we have registers that it is connected to something (by not displaying the screen it does when the cable is unplugged) but just remains blank, no output at all. I recently took the card to my University and one of my friends who is better with hardware issues than I am tried it in his system and it worked perfectly. No issues whatsoever. I do not have a spec list for his system but I could get one if you need it. If you need any more information on this issue I will be happy to supply you with it as I am starting to get very annoyed with this problem ^_^

    Read the article

  • Microsoft signed driver appears as publisher not verfied

    - by Priyanka Gupta
    Task at hand: Microsoft sign drivers on Win 7. I microsoft signed my driver package 3 times every time thinking I might have missed a step or something. However, I cannot seem to get rid of the Windows Security error message "Windows can't verify the publisher of this driver software'. This is not the first time I have signed the driver packages. I was successfully able to sign other driver packages a few months ago. However, with this driver package I keep getting Windows security dialog box. Here's the procedure I follow - Create a new cat file using INF2CAT tool. Self sign the driver using a Versign Class 3 Public Primary Certification Authority - G5.cer. Run the microsoft tests on DTM Servers and clients with the devices that use this driver. Create WLK submission package. Self sign the cab file. Submit the package for certification. The catalog file that comes back after successfully passing tests says Name of signer "Microsoft Windows Hardware Comptibility Publisher". When I check the validity of signature using SignTool, it says the signature is vaild. However, when I try to install the driver with new signed catalog file the windows complain. Any ideas? Edit 11/12/2012: Reply to Eugene's comment Thanks for the help, Eugene. Yes. I did sign two other driver packages before. One of them was modified version of WinUSB driver. I am using the same certificate I used when I signed those two driver packages a few months ago. It costs $250 per signing from Microsoft. I would think that Microsoft would complain about it during certification if the certificate is wrong. I use the following command to self sign the CAT file. I don't have to specify the ceritificate name as there's only one certificate in the directory - Signtool sign /v /a /n CompanyName /t http://timestamp.verisign.com/scripts/timestamp.dll OurCatalogFile.cat Below is the result from running Verify command on the Microsoft signed OurCatalogFile.cat C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\x64signtool verify /v "C:\User s\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Verifying: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Hash of file (sha1): BDDF39B1DD95881B462164129758A7FFD54F47D9 Signing Certificate Chain: Issued to: Microsoft Root Certificate Authority Issued by: Microsoft Root Certificate Authority Expires: Sun May 09 18:28:13 2021 SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072 Issued to: Microsoft Windows Hardware Compatibility PCA Issued by: Microsoft Root Certificate Authority Expires: Thu Jun 04 16:15:46 2020 SHA1 hash: 8D42419D8B21E5CF9C3204D0060B19312B96EB78 Issued to: Microsoft Windows Hardware Compatibility Publisher Issued by: Microsoft Windows Hardware Compatibility PCA Expires: Wed Sep 18 18:20:55 2013 SHA1 hash: D94345C032D23404231DD3902F22AB1C2100341E The signature is timestamped: Tue Nov 06 11:26:48 2012 Timestamp Verified by: Issued to: Microsoft Root Authority Issued by: Microsoft Root Authority Expires: Thu Dec 31 02:00:00 2020 SHA1 hash: A43489159A520F0D93D032CCAF37E7FE20A8B419 Issued to: Microsoft Timestamping PCA Issued by: Microsoft Root Authority Expires: Sun Sep 15 02:00:00 2019 SHA1 hash: 3EA99A60058275E0ED83B892A909449F8C33B245 Issued to: Microsoft Time-Stamp Service Issued by: Microsoft Timestamping PCA Expires: Tue Apr 09 16:53:56 2013 SHA1 hash: 1895C2C907E0D7E5C0292B92C6EA8D0E236F525E Successfully verified: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Number of files successfully Verified: 1 Number of warnings: 0 Number of errors: 0 Thank you!

    Read the article

  • Backing Up vs. Redundancy

    - by TK Kocheran
    I'm currently in stage 2 of 3 of building my home workstation. What this means is that my RAID-0 array of solid state disks will be backed up nightly to a RAID-5 or RAID-6 array of traditional spinning hard disks. However, it recently dawned on me that redundancy is not backup. The main reason for setting up a RAID array with redundancy was to protect myself in the event of a drive failure to serve as an effective backup solution. Wait. What if a bolt of lightning finds a way to travel into my house, through my surge-protector, into my power supply and physically destroys all of my hard disks and SSDs? Well, in that case, I guess I'd be fine because I generally keep most important files (music, pictures, videos) stored in multiple places like on my laptop, my wife's laptop, and an encrypted USB hard drive. Wait. What if a giant hedgehog meteor attacks my house from space traveling at mach 3 and all machines and hard disks are blown to smithereens. Well, I guess I could find a way to do ridiculously slow and cumbersome rsyncs or backups to Amazon's Glacier. Wait. What if there's a nuclear apocalypse... and at this point I start laughing hysterically. At what point does backing up become irrelevant? I completely understand situation one (mechanical drive failure), situation two (workstation compromised or destroyed somehow), possibly even situation three (all machines and disks destroyed), but situation four? There's no questioning the need for backups. None. However, there are three questions I'd really like addressed: To what level should one backup? I definitely understand the merits of physical disk redundancy. I also believe in keeping important files on multiple machines and thinning out the possibility of losing all of my files. Online backups make sense, but they beg the following question. What should I be backing up remotely and how often? It's no problem storage-wise to back up important files (music, pictures, videos) and even configuration and temporal data for all of the machines in my network (all Linux based)... albeit locally. Transferring to the cloud is another story. Worst-case scenario, if I lost all of my configuration for my individual computers, the reality is that I probably lost the machines too. The cloud is a long way away from here; I can run backups over CAT-6 here and see 100MB/s easily, but I'm afraid that I'm only going to see 2MB/s at best when transferring up to the cloud.

    Read the article

  • Suspend only works once after full power cycle with ASUS P7P55D-E Pro

    - by John Chadwick
    This one is strange. I can't seem to get suspend working more than once per power cycle. When I say "power cycle," I mean the only way to get one proper suspend is to cut power from the power supply and boot back up cold. After the proper suspend, I get a failed suspend, and after all reboots or cold boots until power is cut, suspends fail. I'm using an ASUS P7P55D-E Pro with a Sandy Bridge Core i7, running on Ubuntu Precise repositories and UEFI. I'm running Nouveau from repository (And Gallium3d compiled from git, but that does not come into this since I can avoid OpenGL and it still happens the same way) with a GTX 285 (nv50.) I had to build a custom kernel (3.3) in order for ACPI 5.0 to be supported and make suspend work at all. I compiled it using the latest Ubuntu kernel's config file with the additional entries set to the default options. All packages are up to date. I know these are relatively exotic settings, but I'm hoping maybe I can get some help anyways. The behavior when suspend fails is strange. Upon a proper suspend, all fans turn off and the only led left on, the power led, is blinking. Upon a failed suspend, 1. USB power remains. 2. The power led stays on solid. 3. All fans seem to still be on. 4. I can hear what I believe is the primary harddrive shutting off. 5. Despite USB power remaining, the USB powered keyboard does not respond to anything, and the indicator leds on it shut off. Pressing the power button does nothing, and of course I have not to date found a way to wake it up. When trouble shooting the first round of issues I got with suspend not too long ago, I ended up building a list of modules to disable upon sleeping. Here's my config file for them: In /etc/pm/config.d/01modules: SUSPEND_MODULES="uhci_hd ehci_hd button" All of my other pm configuration files are stock. In case it's any help, here are my relevant BIOS settings. Thanks.

    Read the article

  • Brand new Mac Pro tower fan suddenly runs full-tilt

    - by Caffeine Coma
    My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

    Read the article

  • Microsoft signed drivers appears as publisher not verfied

    - by Priyanka Gupta
    Task at hand: Microsoft sign drivers on Win 7. I microsoft signed my driver package 3 times every time thinking I might have missed a step or something. However, I cannot seem to get rid of the Windows Security error message "Windows can't verify the publisher of this driver software'. This is not the first time I have signed the driver packages. I was successfully able to sign other driver packages a few months ago. However, with this driver package I keep getting Windows security dialog box. Here's the procedure I follow - Create a new cat file using INF2CAT tool. Self sign the driver using a Versign Class 3 Public Primary Certification Authority - G5.cer. Run the microsoft tests on DTM Servers and clients with the devices that use this driver. Create WLK submission package. Self sign the cab file. Submit the package for certification. The catalog file that comes back after successfully passing tests says Name of signer "Microsoft Windows Hardware Comptibility Publisher". When I check the validity of signature using SignTool, it says the signature is vaild. However, when I try to install the driver with new signed catalog file the windows complain. Any ideas? Edit 11/12/2012: Reply to Eugene's comment Thanks for the help, Eugene. Yes. I did sign two other driver packages before. One of them was modified version of WinUSB driver. I am using the same certificate I used when I signed those two driver packages a few months ago. It costs $250 per signing from Microsoft. I would think that Microsoft would complain about it during certification if the certificate is wrong. I use the following command to self sign the CAT file. I don't have to specify the ceritificate name as there's only one certificate in the directory - Signtool sign /v /a /n CompanyName /t http://timestamp.verisign.com/scripts/timestamp.dll OurCatalogFile.cat Below is the result from running Verify command on the Microsoft signed OutCatalogFile.cat C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\x64signtool verify /v "C:\User s\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Verifying: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Hash of file (sha1): BDDF39B1DD95881B462164129758A7FFD54F47D9 Signing Certificate Chain: Issued to: Microsoft Root Certificate Authority Issued by: Microsoft Root Certificate Authority Expires: Sun May 09 18:28:13 2021 SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072 Issued to: Microsoft Windows Hardware Compatibility PCA Issued by: Microsoft Root Certificate Authority Expires: Thu Jun 04 16:15:46 2020 SHA1 hash: 8D42419D8B21E5CF9C3204D0060B19312B96EB78 Issued to: Microsoft Windows Hardware Compatibility Publisher Issued by: Microsoft Windows Hardware Compatibility PCA Expires: Wed Sep 18 18:20:55 2013 SHA1 hash: D94345C032D23404231DD3902F22AB1C2100341E The signature is timestamped: Tue Nov 06 11:26:48 2012 Timestamp Verified by: Issued to: Microsoft Root Authority Issued by: Microsoft Root Authority Expires: Thu Dec 31 02:00:00 2020 SHA1 hash: A43489159A520F0D93D032CCAF37E7FE20A8B419 Issued to: Microsoft Timestamping PCA Issued by: Microsoft Root Authority Expires: Sun Sep 15 02:00:00 2019 SHA1 hash: 3EA99A60058275E0ED83B892A909449F8C33B245 Issued to: Microsoft Time-Stamp Service Issued by: Microsoft Timestamping PCA Expires: Tue Apr 09 16:53:56 2013 SHA1 hash: 1895C2C907E0D7E5C0292B92C6EA8D0E236F525E Successfully verified: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Number of files successfully Verified: 1 Number of warnings: 0 Number of errors: 0 Thank you!

    Read the article

  • Postfix: Relay access denied

    - by Joseph Silvashy
    When I telnet to my server thats running postfix and try to send an email: MAIL FROM:<[email protected]> #=> 250 2.1.0 Ok RCPT TO:<[email protected]> #=> 554 5.7.1 <[email protected]>: Relay access denied I couldn't really find the answer on the site or by looking at other users question/answers, I'm not sure where to start. Ideas? Update So basically looking at the docs: http://www.postfix.org/SMTPD_ACCESS_README.html (section: Getting selective with SMTP access restriction lists), I don't seem to have any of those directives in etc/postfix/main.cf like smtpd_client_restrictions = permit_mynetworks, reject or any of the other ones, so I'm quite confused. But really I'm going to have a rails app connect to the server and send the emails, so I'm not sure how to handle it. Here is what my config file looks like: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = rerecipe-utils alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, mail.rerecipe.com, rerecipe.com relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all mynetworks = 127.0.0.0/8 204.232.207.0/24 10.177.64.0/19 [::1]/128 [fe80::%eth0]/64 [fe80::%eth1]/64 Something to note is that relayhost is blank, this is the default configuration file that was created when I installed Postfix, when testing to connect with openssl I get this: ~% openssl s_client -connect mail.myhostname.com:25 -starttls smtp CONNECTED(00000003) depth=0 /CN=myhostname verify error:num=18:self signed certificate verify return:1 depth=0 /CN=myhostname verify return:1 --- Certificate chain 0 s:/CN=myhostname i:/CN=myhostname --- Server certificate -----BEGIN CERTIFICATE----- MIIBqTCCARICCQDDxVr+420qvjANBgkqhkiG9w0BAQUFADAZMRcwFQYDVQQDEw5y ZXJlY2lwZS11dGlsczAeFw0xMDEwMTMwNjU1MTVaFw0yMDEwMTAwNjU1MTVaMBkx FzAVBgNVBAMTDnJlcmVjaXBlLXV0aWxzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQDODh2w4A1k0qiPNPhkrPj8sfkxpKPTk28AuZhgOEBYBLeHacTKNH0jXxPv P3TyhINijvvdDPzyuPJoTTliR2EHR/nL4DLhr5FzhV+PB4PsIFUER7arx+1sMjz6 5l/Ubu1ppMzW9U0IFNbaPm2AiiGBQRCQN8L0bLUjzVzwoSRMOQIDAQABMA0GCSqG SIb3DQEBBQUAA4GBALi2vvk9TGKJubXYJbU0PKmVmsfzFK35yLqr0keiDBhK2Leg 274sWxEH3ds8mUaRftuFlXb7RYAGNlVyTuMTY3CEcnqIsH7F2McCUTpjMzu/o1mZ O/B21CelKetBd1u79Gkrv2vWyN7Csft6uTx5NIGG2+pGi3r0gX2r0Hbu2K94 -----END CERTIFICATE----- subject=/CN=myhostname issuer=/CN=myhostname --- No client certificate CA names sent --- SSL handshake has read 1203 bytes and written 360 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 1AA4B8BFAAA85DA9ED4755194C50311670E57C35B8C51F9C2749936DA11918E4 Session-ID-ctx: Master-Key: 9B432F1DE9F3580DCC6208C76F96631DC5A4BC517BDBADD5F514414DCF34AC526C30687B96C5C4742E9583555A118232 Key-Arg : None Start Time: 1292985376 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN Oddly enough when I try to send an email from the machine itself it does work: echo test | mail -s "test subject" [email protected]

    Read the article

  • Custom built machine has much higher power consumption than expected

    - by foraidt
    I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

    Read the article

  • Secure openVPN using IPTABLES

    - by bob franklin smith harriet
    Hey, I setup an openVPN server and it works ok. The next step is to secure it, I opted to use IPTABLES to only allow certain connections through but so far it is not working. I want to enable access to the network behind my openVPN server, and allow other services (web access), when iptables is disabaled or set to allow all this works fine, when using my following rules it does not. also note, I already configured openVPN itself to do what i want and it works fine, its only failing when iptables is started. Any help to tell me why this isnt working will appreciated here. These are the lines that I added in accordance with openVPN's recommendations, unfortunately testing these commands shows that they are requiered, they seem incredibly insecure though, any way to get around using them? # Allow TUN interface connections to OpenVPN server -A INPUT -i tun+ -j ACCEPT #allow TUN interface connections to be forwarded through other interfaces -A FORWARD -i tun+ -j ACCEPT # Allow TAP interface connections to OpenVPN server -A INPUT -i tap+ -j ACCEPT # Allow TAP interface connections to be forwarded through other interfaces -A FORWARD -i tap+ -j ACCEPT These are the new chains and commands i added to restrict access as much as possible unfortunately with these enabled, all that happens is the openVPN connection establishes fine, and then there is no access to the rest of the network behind the openVPN server note I am configuring the main iptables file and I am paranoid so all ports and ip addresses are altered, and -N etc appears before this so ignore that they dont appear. and i added some explanations of what i 'intended' these rules to do, so you dont waste time figuring out where i went wrong : 4 #accepts the vpn over port 1192 -A INPUT -p udp -m udp --dport 1192 -j ACCEPT -A INPUT -j INPUT-FIREWALL -A OUTPUT -j ACCEPT #packets that are to be forwarded from 10.10.1.0 network (all open vpn clients) to the internal network (192.168.5.0) jump to [sic]foward-firewall chain -A FORWARD -s 10.10.1.0/24 -d 192.168.5.0/24 -j FOWARD-FIREWALL #same as above, except for a different internal network -A FORWARD -s 10.10.1.0/24 -d 10.100.5.0/24 -j FOWARD-FIREWALL # reject any not from either of those two ranges -A FORWARD -j REJECT -A INPUT-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT-FIREWALL -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT-FIREWALL -j REJECT -A FOWARD-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT #80 443 and 53 are accepted -A FOWARD-FIREWALL -m tcp -p tcp --dport 80 -j ACCEPT -A FOWARD-FIREWALL -m tcp -p tcp --dport 443 -j ACCEPT #192.168.5.150 = openVPN sever -A FOWARD-FIREWALL -m tcp -p tcp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -m udp -p udp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -j REJECT COMMIT now I wait :D

    Read the article

  • Is it possible to write C# code as below and send email using my home network?

    - by kedar karthik
    Is it possible to write C# code as below and send email using my home network? I have a valid user name and password on that exchange server. Is there any configuration that I can set to achieve this? BTW this code blow works when I run it within office network. I want this code to work when run from any network. String cMSExchangeWebServiceURL = (String)System.Configuration.ConfigurationSettings.AppSettings["MSExchangeWebServiceURL"]; String cEmail = (String)System.Configuration.ConfigurationSettings.AppSettings["Cemail"]; String cPassword = (String)System.Configuration.ConfigurationSettings.AppSettings["Cpassword"]; String cTo = (String)System.Configuration.ConfigurationSettings.AppSettings["CTo"]; ExchangeServiceBinding esb = new ExchangeServiceBinding(); esb.Timeout = 1800000; esb.AllowAutoRedirect = true; esb.UseDefaultCredentials = false; esb.Credentials = new NetworkCredential(cEmail, cPassword); esb.Url = cMSExchangeWebServiceURL; ServicePointManager.ServerCertificateValidationCallback += delegate(object sender1, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; }; // Create a CreateItem request object CreateItemType request = new CreateItemType(); // Setup the request: // Indicate that we only want to send the message. No copy will be saved. request.MessageDisposition = MessageDispositionType.SendOnly; request.MessageDispositionSpecified = true; // Create a message object and set its properties MessageType message = new MessageType(); message.Subject = subject; message.Body = new TestOutgoingEmailServer.com.cogniti.mail1.BodyType(); message.Body.BodyType1 = BodyTypeType.HTML; message.Body.Value = body; message.ToRecipients = new EmailAddressType[3]; message.ToRecipients[0] = new EmailAddressType(); //message.ToRecipients[1] = new EmailAddressType(); //message.ToRecipients[2] = new EmailAddressType(); message.ToRecipients[0].EmailAddress = "[email protected]"; message.ToRecipients[0].RoutingType = "SMTP"; //message.CcRecipients = new EmailAddressType[1]; //message.CcRecipients[0] = new EmailAddressType(); //message.CcRecipients[0].EmailAddress = toEmailAddress.ElementAt(1).ToString(); //message.CcRecipients[0].RoutingType = "SMTP"; //There are some more properties in MessageType object //you can set all according to your requirement // Construct the array of items to send request.Items = new NonEmptyArrayOfAllItemsType(); request.Items.Items = new ItemType[1]; request.Items.Items[0] = message; // Call the CreateItem EWS method. CreateItemResponseType response = esb.CreateItem(request);

    Read the article

  • SSL certificate for Oracle Application Server 11g

    - by Easter Sunshine
    I was asked to get an SSL certificate for an "Oracle Application Server 11g" which has a soon-to-expire certificate. Brushing aside the fact that 10g seems to be the newest version, I got a certificate from InCommon, as I usually do without problem (except this is the first time I supplied Oracle Application Server 11g as the software type on the CSR form). On the email containing links to download the certificate, it mentioned: Certificate Details: SSL Type : InCommon SSL Server : OTHER I forwarded the email over to the person responsible for installing it and got a reply that the server type must be Oracle Application Server for the certificate to work (the CN is the same as before). They were unable to install this certificate (no details provided to me) and mentioned they had this issue previously with Thawte when they didn't supply Oracle Application Server as the server type. I don't see any significant difference between the currently installed certificate (working) and the new one I just got signed by InCommon (not working). $ openssl x509 -in sso-current.cer -text shows, with irrelevant information ommitted. Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=ZA, ST=Western Cape, L=Cape Town, O=Thawte Consulting cc, OU=Certification Services Division, CN=Thawte Premium Server CA/[email protected] Validity Not Before: Oct 1 00:00:00 2009 GMT Not After : Nov 28 23:59:59 2012 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Basic Constraints: critical CA:FALSE X509v3 CRL Distribution Points: Full Name: URI:http://crl.thawte.com/ThawteServerPremiumCA.crl X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication Authority Information Access: OCSP - URI:http://ocsp.thawte.com Signature Algorithm: sha1WithRSAEncryption and $ openssl x509 -in sso-new.cer -text shows Data: Version: 3 (0x2) Signature Algorithm: sha1WithRSAEncryption Issuer: C=US, O=Internet2, OU=InCommon, CN=InCommon Server CA Validity Not Before: Nov 8 00:00:00 2012 GMT Not After : Nov 8 23:59:59 2014 GMT Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Authority Key Identifier: keyid:48:4F:5A:FA:2F:4A:9A:5E:E0:50:F3:6B:7B:55:A5:DE:F5:BE:34:5D X509v3 Subject Key Identifier: 18:8D:F6:F5:87:4D:C4:08:7B:2B:3F:02:A1:C7:AC:6D:A7:90:93:02 X509v3 Key Usage: critical Digital Signature, Key Encipherment X509v3 Basic Constraints: critical CA:FALSE X509v3 Extended Key Usage: TLS Web Server Authentication, TLS Web Client Authentication X509v3 Certificate Policies: Policy: 1.3.6.1.4.1.5923.1.4.3.1.1 CPS: https://www.incommon.org/cert/repository/cps_ssl.pdf X509v3 CRL Distribution Points: Full Name: URI:http://crl.incommon.org/InCommonServerCA.crl Authority Information Access: CA Issuers - URI:http://cert.incommon.org/InCommonServerCA.crt OCSP - URI:http://ocsp.incommon.org Nothing jumps out at me as the reason one would not work so I don't have a specific request for the signer for what to do differently when re-signing.

    Read the article

  • Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

    - by Pro Backup
    In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

    Read the article

  • Old CRT screen's high resolution doesn't work anymore on windows 7

    - by Mixxiphoid
    One year ago I decided to switch from Windows XP to Windows 7. I had a 17" CRT monitor with a screen resolution of 1600x1200 which worked fine on Windows XP. While installing Windows 7 everything went well until Windows 7 was going to install the video card its driver. Windows 7 puts the screen to its recommended resolution and my screen became black. I waited a few minutes to be sure the installation was finished. I turned off the computer by hand and restarted the computer on a resolution of 800x640. When windows 7 was done installing I went to screen resolutions and the resolution of 1600x1200 was on the top of the list with '(recommended)' next to it. I tried putting it on 1600x1200 but again my screen went black. I installed all windows 7 updates including the video card driver from the NVidia site (NOT from Windows 7). I tried about everything to make it work on 1600x1200 but with no succes. The highest resolution I got with the crt monitor was 1280x1024. I had a TFT screen which had 1280x1024 as max resolution and had better colors, so I used that one till today. My video card is 9600GT and my power supply is beyond sufficient. I even tried to install the driver I had on XP to see if it worked, but no results. I tried classic mode on windows 7, changed the dpi, the frequentie and the monitor settings, but nothing worked. I really like a vertical resolution of 1200, but it seems today I'm bound to all those standard monitors with a resolution of 1980x1024... Can anybody explain to me what the cause is that it worked on Windows XP but not on Windows 7? And maybe a solution to the problem (I actually gave up on getting it fixed...) Thanks a lot in advance. SOLUTION I downloaded the according monitor driver and installed it. Next I rebooted my computer on low resolution (800x640) and connected the CRT monitor. When Windows 7 booted successfully I went to computer management and 'update the driver' of my monitor. I manually selected 'Generic PnP monitor' and made that one active. I want to advanced settings at 'Screen resolution' and selected the mode '1600x1200 (32-bit) 80 Hertz (95 Hertz did not work). Now I had my resolution on 1600x1200. I repeated the earlier step to select the original monitor again instead of the Generic monitor. Quite a way to solve this problem, but it worked! Thanks a lot you all.

    Read the article

  • Cannot Send Item error in Outlook - permissions to registry?

    - by Tim Alexander
    The issue I am trying to solve is to do with users getting a Cannot Send Item error in Outlook 2007 connecting to Exchange 2007. Basically if there is an image in the email (either one they have pasted in or one from another email in the chain) they get a "Cannot Send Item" error. Initially thought it was a citrix issue but users get it when they RDP to a server as well. Changing the message to Rich Text works 80% of the time but I do not think this is a solution but more of a temporary workaround. After some troubleshooting we found that the error can be fixed by adding the user as a member of the local power users group. of course this is not really a fix. My thoughts were that the ability of a power user to add/remove software may give them more access to the registry which might allow them to get round a restriction that is in place for a normal user. I have tried going through a procmon but the wealth of information is confusing. It initially looked like it may be an Outlook 2007 email security setting but this does not change between power user and normal user (set to 1 in the registry, "Use the security setting from Outlook Security Settings Public Folders"). I am struggling to fine tune my troubleshooting to work out exactly what is blocking it. Has anyone had an experience with an error similar to this? Or are there any tips for trying to track down issues via procmon as I must admit my approach seems somewhat lacking :) EDIT: So I have trawled through the two logs we have from process monitor (one as a power user and one a normal user). annoyingly I can find no obvious difference where something is denied access. There are more access denied events in the normal user log but these are quickly followed by sucessful entries to the same path fractions of a second later. The only thing that does stand out is an access denied to HKCR.html. This does not even appear in the power user version of the log. From what I understand this helps determine the default browser which ties in nicely with the fact that 9 out of 10 times you can send the message as Rich Text. EDIT: Looks like KB2509470 was causing the issue. Not really sure why but when I can work out what it does and why it causes the problem will post here unless anyone beats me to it!

    Read the article

  • Gigabyte GA-Z77X-D3H MB problems

    - by Hans
    I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

    Read the article

  • How should I use my new SSD drive?

    - by jasondavis
    I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

    Read the article

  • routing through multiple subinterfaces in debian

    - by Kstro21
    my question is as simple as the title, i have a debian 6 , 2 NICs, 3 different subnets in a single interface, just like this: auto eth0 iface eth0 inet static address 192.168.106.254 netmask 255.255.255.0 auto eth0:0 iface eth0:0 inet static address 172.19.221.81 netmask 255.255.255.248 auto eth0:1 iface eth0:1 inet static address 192.168.254.1 netmask 255.255.255.248 auto eth1 iface eth1 inet static address 172.19.216.3 netmask 255.255.255.0 gateway 172.19.216.13 eth0 is conected to a swith with 3 differents vlans, eth1 is conected to a router. No iptables DROP, so, all traffic is allowed. Now, passing the traffic through eth0 is OK, passing the traffic through eth0:0 is OK, but, passing the traffic through eth0:1 is not working, i can ping the ip address of that sub interface from a pc where this ip is the default gateway, but can't get to servers in the subnet of the eth1 interface, the traffic is not passing, even when i set the iptables to log all the traffic in the FORWARD chain and i can see the traffic there, but, the traffic is not really passing. And the funny is i can do any the other way around, i mean, passing from eth1 to eth0:1, RDP, telnet, ping, etc, doing some work with the iptable, i manage to pass some traffic from eth0:1 to eth1, the iptables look like this: iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m multiport --dports 25,110,5269 -j DNAT --to-destination 172.19.216.1 iptables -t nat PREROUTING -d 192.168.254.1/32 -p udp -m udp --dport 53 -j DNAT --to-destination 172.19.216.9 iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m tcp --dport 21 -j DNAT --to-destination 172.19.216.11 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 172.19.221.80/29 -j SNAT --to-source 172.19.221.81 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 192.168.254.0/29 -j SNAT --to-source 192.168.254.1 iptables -t nat POSTROUTING -s 172.19.216.0/24 -o eth0 -j SNAT --to-source 192.168.106.254 dong this is working, but,it is really a headache have to map each port with the server, imagine if i move the service from server, so, now i have doubts: can debian route through multiple subinterfaces?? exist a limit for this?? if not, what i'm doing wrong when i have the same setup with other subnets and it is working ok?? without the iptables rules in the nat, it doesn't work thanks and i hope good comments/answers

    Read the article

  • How to encrypt dual boot windows 7 and xp (bitlocker, truecrypt combo?) on sdd (recommended?)

    - by therobyouknow
    I would like to setup a dual boot Windows 7 and Windows XP laptop/notebook computer where each operation system's partition is fully encrypted. I would like to do this on a SSD - a 128Gb Crucial M4. My research Dual boot of truecrypt encrypted OSs on one drive (not possible - in Truecript 7.x at time of writing) This cannot be done on a standard Truecrypt setup - it will only support encrypting one of the operating systems. I have tried this and also read about it here on superuser.com However, I did see a solution here that uses grub4dos as the initial bootloader to chain to separate truecrypt encrypted OSs, in my case Windows 7 and Windows XP: http://yyzyyz.blogspot.co.uk/2010/06/truecrypt-how-to-encrypt-multiple.html I am not going to consider this solution as it relies upon some custom code for use in the bootloader that is provided by the author. I would prefer a solution that can be fully understood so that I can be sure that there is nothing undesirable occuring (i.e. malware or just simply bugs in the code). I would like to believe such a solution doesn't have those risks but I can't be sure. BitLocker and Truecrypt combination - possible solution? So I am now considering a combination of encryption programs: I now aim to encrypt Windows XP with Truecrypt and Windows 7 with BitLocker. Assuming Truecrypt bootloader can boot into non-Truecrypt OSs (e.g. via hitting Escape to go to another menu), then this solution may be viable. SSDs and Encryption (use fastest possible spinning hard disk instead (?)) I read on various superuser.com posts and elsewhere that current SSDs are not suited to whole drive encryption for various reasons: impact of performance algorithms that give SSDs advantage over spinning harddisks. Algorithms used in compression of data for example. Wear on the SSD, shortening its life Security issues whereby data is repeated, as indicated in some Truecrypt documentation So I am now considering not using SSD. But with the aim to have the fastest drive possible, I am considering using the Western Digital Scorpion black 2.5" 7200rpm harddisk as this appears to be top rated among spinning platter-based harddrives (don't work for Western Digital). Summary So to achieve whole drive encrypted dual boot Windows 7 and Windows XP with minimal performance impact I intend to use a combination of Truecrypt and Bitlocker on a top-rated conventional spinning platter-based harddisk. Questions Will my summary: achieve whole disk encryption of the dual-boot Windows XP, Windows 7? OR an you suggest a simpler solution, including one that only requires only Truecrypt (BitLocker not available on XP). Or another encryption tool, including paid-for? provide the highest performance. Am I correct to avoid using SDD with encryption for the reasons I discovered? Are the concerns about SSDs and encryption still very real (some articles I read go back to 2010) Thanks for your input!

    Read the article

  • Can this USB3 behaviour be anything else than a hardware failure?

    - by Jonas Wielicki
    While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

    Read the article

  • RDP exits immediately after connecting to Windows Server 2008 R2

    - by carpat
    Background: I recently got a Windows cloud VPS server. I don't have much experience with server admin (I'm a programmer), and what little I do have is with linux servers. Ever since getting the server I've been having issues with RDP. I can connect about two or three times, after which point I can't connect until one of the tech guys "fixes" it (see below). When I connect, I can stay connected for hours with no problem. When the problem connecting starts, the first time I try to log in, the remote desktop window pops up, starts connecting, and then exits with "Your Remote Desktop session has ended". After that, for about 10-20 minutes if I try to connect again, the connections times out with Remote Desktop can't connect to the computer for one of these reasons: 1) Remote access on the server is not enabled 2) The remote computer is turned off 3) The remote computer is not available on the network then goes back to connecting once and immediately disconnecting. All of the updates are installed. The firewall has been correctly configured to let RDP traffic through. The remote setting is "Allow connections from computers running any version of Remote Desktop". I tried creating a second user, and when I can't connect, I can't connect to that user either. I've tried both soft and hard reboots, neither of which help. I've tried connecting from two different computers (both running Windows 7) from two different networks (work and home), and the behavior is the same. Everything else on the server continues to run fine (IIS-served http pages, Tomcat-served java pages, svn, ping). The "fix" that the tech guys supply is simply logging into the console on their end, after which point I can connnect 2 or 3 times again. The event viewer on the server has "authentication failure" (or something similar) events generated when I attempt to log in and can't. I can't get to the actual event at the moment as I'm currently in the can't connect stage, and waiting for the techs to log in. But when I searched for the event earlier this morning I couldn't find anything useful. Can anyone help?

    Read the article

  • Apache certificates for some urls not working

    - by Vegaasen
    We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

    Read the article

  • Why can't we reach some (but not all) external web service via VPN connection?

    - by Paul Haldane
    At work (UK university) we use a set of Windows servers running WS2008R2 and RRAS which offer VPN service to students in our accommodation. We do this to associate the network connections with individuals. Before they've connected to the VPN all they can talk to is the stuff thats needed to setup the VPN and a local web site with documentation on how to connect. Medium term we'll probably replace this but it's what we're using at the moment. VPN on the 2008 servers allocates client a private (10.x) address. Access to external sites is through NAT on the campus routers (same as any other directly connected client on a private address). Non-VPN connections aren't seeing this problem. Older servers run WS 2003 and ISA2004. That setup works but has become unreliable under load. Big difference there was that we were allocating non-RFC1918 addresses to the clients (so no NAT required). Behaviour we're seeing is that once connected to the VPN, clients can reach local web sites (that is sites on the campus network) but only some external sites. It seems (but this may be chance) that the sites we can reach are Google ones (including YouTube). We certainly have trouble reaching Microsoft's Office 365 service (which is a pain because that's where mail for most of our students is). One odd bit of behaviour is that clients can fetch (using wget on a Windows 7 client) http://www.oracle.com/ (which gets a 301 redirect) but hangs when asked to fetch http://www.oracle.com/index.html (which is what the first URL redirects to). Access works reliably if we configure clients to use our local web proxies (Squid). My gut tells me that this is likely to be something in the chain dropping replies either based on HTTP inspection or the IP address in the reply. However I'm puzzled about why we're seeing this with the VPN clients. Plan for tomorrow (when I'm back in the office) is to setup a web server on external connection so that we can monitor behaviour at both ends of the conversation (hoping that the problem manifests itself with our test server). Any suggestions for things we should be looking at?

    Read the article

  • change height in Android 2.2 LinearLayout in code

    - by Niro
    Im trying to change height of Layouts through the code without success. I've tried all of the examples i saw here and other site and my app just keep shutting down. xml code: <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:id="@+id/main_lay" android:orientation="vertical" tools:context=".MainActivity" > <LinearLayout android:id="@+id/layout_add" > </LinearLayout> <LinearLayout android:layout_width="fill_parent" android:layout_height="50dp" android:background="@color/green"> <ImageView android:layout_width="fill_parent" android:contentDescription="@string/desc" android:layout_height="45dp" android:layout_gravity="center_vertical|left" android:scaleType="fitStart" android:background="@color/orange" android:src="@drawable/logo" > </ImageView> </LinearLayout> </LinearLayout> Java code: main_layout=(LinearLayout)findViewById(R.id.main_lay); main_layout.setLayoutParams(new FrameLayout.LayoutParams(LayoutParams.MATCH_PARENT,LayoutParams.MATCH_PARENT)); main_layout.setBackgroundResource(R.color.white); layout_add = (LinearLayout) findViewById(R.id.layout_add); layout_add.setLayoutParams(new FrameLayout.LayoutParams(LayoutParams.FILL_PARENT,50 )); layout_add.setBackgroundResource(R.color.dark_grey); I cant understand what im doing wrong. I've tried different ways to fix it. The Backround setting is working fine. Thank you guys Niro This is the Logcat 12-09 16:12:39.007: E/AnalyticsSDKTest.cpp(6338): Time w/ UTC Offset: 2012-12-09 12-09 16:16:14.517: E/ActivityManager(121): fail to set top app changed! 12-09 16:16:14.547: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Consumer closed input channel or an error occurred. events=0x8 12-09 16:16:14.547: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Channel is unrecoverably broken and will be disposed! 12-09 16:16:18.071: E/PVWmdrmProxy(5716): binder died for component: ComponentInfo{com.pv.wmdrmservice/com.pv.wmdrmservice.PVWmdrmService} 12-09 16:16:18.161: E/AndroidRuntime(18911): FATAL EXCEPTION: main 12-09 16:16:18.161: E/AndroidRuntime(18911): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.nirosadvice.converter/com.nirosadvice.converter.MainActivity}: java.lang.RuntimeException: Binary XML file line #1: You must supply a layout_width attribute. 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1821) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1842) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.access$1500(ActivityThread.java:132) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1038) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.os.Looper.loop(Looper.java:150) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:16:18.161: E/AndroidRuntime(18911): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:16:18.161: E/AndroidRuntime(18911): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:16:18.161: E/AndroidRuntime(18911): at dalvik.system.NativeStart.main(Native Method) 12-09 16:16:18.161: E/AndroidRuntime(18911): Caused by: java.lang.RuntimeException: Binary XML file line #1: You must supply a layout_width attribute. 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.content.res.TypedArray.getLayoutDimension(TypedArray.java:491) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.ViewGroup$LayoutParams.setBaseAttributes(ViewGroup.java:3684) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.ViewGroup$MarginLayoutParams.<init>(ViewGroup.java:3764) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.widget.FrameLayout$LayoutParams.<init>(FrameLayout.java:457) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.widget.FrameLayout.generateLayoutParams(FrameLayout.java:423) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.widget.FrameLayout.generateLayoutParams(FrameLayout.java:47) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.LayoutInflater.inflate(LayoutInflater.java:396) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.LayoutInflater.inflate(LayoutInflater.java:320) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.LayoutInflater.inflate(LayoutInflater.java:276) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.android.internal.policy.impl.PhoneWindow.setContentView(PhoneWindow.java:231) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.Activity.setContentView(Activity.java:1715) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.nirosadvice.converter.MainActivity.onCreate(MainActivity.java:87) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1072) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1785) 12-09 16:16:18.161: E/AndroidRuntime(18911): ... 11 more Thanks After Iv'e added the attributes to the XML - this is what i'm getting : CatLog: 12-09 16:42:33.168: E/AndroidRuntime(19065): FATAL EXCEPTION: main 12-09 16:42:33.168: E/AndroidRuntime(19065): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.View.measure(View.java:8526) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.View.measure(View.java:8526) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.View.measure(View.java:8526) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.os.Looper.loop(Looper.java:150) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:42:33.168: E/AndroidRuntime(19065): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:42:33.168: E/AndroidRuntime(19065): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:42:33.168: E/AndroidRuntime(19065): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:42:33.168: E/AndroidRuntime(19065): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:42:33.168: E/AndroidRuntime(19065): at dalvik.system.NativeStart.main(Native Method) 12-09 16:42:39.023: E/AnalyticsSDKTest.cpp(6338): Time w/ UTC Offset: 2012-12-09 21:42:39-05:00 12-09 16:42:49.013: E/AndroidRuntime(19095): FATAL EXCEPTION: main 12-09 16:42:49.013: E/AndroidRuntime(19095): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.View.measure(View.java:8526) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.View.measure(View.java:8526) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.View.measure(View.java:8526) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.os.Looper.loop(Looper.java:150) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:42:49.013: E/AndroidRuntime(19095): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:42:49.013: E/AndroidRuntime(19095): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:42:49.013: E/AndroidRuntime(19095): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:42:49.013: E/AndroidRuntime(19095): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:42:49.013: E/AndroidRuntime(19095): at dalvik.system.NativeStart.main(Native Method) 12-09 16:44:00.913: E/AndroidRuntime(19148): FATAL EXCEPTION: main 12-09 16:44:00.913: E/AndroidRuntime(19148): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.View.measure(View.java:8526) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.View.measure(View.java:8526) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.View.measure(View.java:8526) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.os.Looper.loop(Looper.java:150) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:44:00.913: E/AndroidRuntime(19148): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:44:00.913: E/AndroidRuntime(19148): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:44:00.913: E/AndroidRuntime(19148): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:44:00.913: E/AndroidRuntime(19148): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:44:00.913: E/AndroidRuntime(19148): at dalvik.system.NativeStart.main(Native Method) 12-09 16:44:02.935: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Consumer closed input channel or an error occurred. events=0x8 12-09 16:44:02.935: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Channel is unrecoverably broken and will be disposed! 12-09 16:45:25.075: E/AndroidRuntime(19210): FATAL EXCEPTION: main 12-09 16:45:25.075: E/AndroidRuntime(19210): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.View.measure(View.java:8526) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.View.measure(View.java:8526) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.View.measure(View.java:8526) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.os.Looper.loop(Looper.java:150) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:45:25.075: E/AndroidRuntime(19210): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:45:25.075: E/AndroidRuntime(19210): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:45:25.075: E/AndroidRuntime(19210): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:45:25.075: E/AndroidRuntime(19210): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:45:25.075: E/AndroidRuntime(19210): at dalvik.system.NativeStart.main(Native Method) 12-09 16:50:34.507: E/AndroidRuntime(19358): FATAL EXCEPTION: main 12-09 16:50:34.507: E/AndroidRuntime(19358): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.View.measure(View.java:8526) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.View.measure(View.java:8526) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.View.measure(View.java:8526) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.os.Looper.loop(Looper.java:150) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:50:34.507: E/AndroidRuntime(19358): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:50:34.507: E/AndroidRuntime(19358): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:50:34.507: E/AndroidRuntime(19358): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:50:34.507: E/AndroidRuntime(19358): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:50:34.507: E/AndroidRuntime(19358): at dalvik.system.NativeStart.main(Native Method) Third try - after changing the Frame to Linear : 12-09 17:42:39.076: E/AnalyticsSDKTest.cpp(6338): Time w/ UTC Offset: 2012-12-09 22:42:39-05:00 12-09 17:55:44.141: E/ActivityManager(121): Fix ANR:broadcast when App died 12-09 17:55:44.722: E/AndroidRuntime(19469): FATAL EXCEPTION: main 12-09 17:55:44.722: E/AndroidRuntime(19469): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.View.measure(View.java:8526) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.View.measure(View.java:8526) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.View.measure(View.java:8526) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.os.Looper.loop(Looper.java:150) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 17:55:44.722: E/AndroidRuntime(19469): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 17:55:44.722: E/AndroidRuntime(19469): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 17:55:44.722: E/AndroidRuntime(19469): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 17:55:44.722: E/AndroidRuntime(19469): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 17:55:44.722: E/AndroidRuntime(19469): at dalvik.system.NativeStart.main(Native Method)

    Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >