Search Results

Search found 10 results on 1 pages for 'rstp'.

Page 1/1 | 1 

• netgear GS108TV2 RSTP configuration

  - by jhowland

  I have a large set of GS108TV2 units--my goal is to set up a network which is comprised of several loops for redundancy/fault tolerance. I have a minimal 3 switch loop configured, with RSTP enabled on two ports on each switch. I have my bridge max age set to 6, and my bridge forward delay set to 4, which are the minimum values allowed. Hello time is fixed at 2 seconds. The switches respond to a cable being removed from a socket, but it takes too long. I cannot get the switch to respond to a loss of connection on one of the redundant ports in less than 20 seconds. Is there any way to configure these switches to respond faster than 20 seconds? That is unacceptable for my application. thanks in advance for any help

  Read the article

• Recommendation for Ethernet switches that allow arbitrary network topologies

  - by sblair

  We have the following requirements for three Ethernet switches that will be connected together: Allow the switches to connect together to form dynamic, arbitrary topologies, i.e., support for the RSTP is essential. Allow the physical topology (which ports are connected together) to be gleaned from the switches, e.g., using SNMP traps. This is optional, but would be very useful. At least 5 ports on each switch, but only 3 will be used for connecting the switches together. Be as compact as possible. Ideally be in stock, in the UK. Only 100Mb/s is required. (This question is the result of the lack of RSTP support from 3Com NJ225 devices, as described in my previous question.)

  Read the article

• Getting a domain sub-directory url for a new server

  - by Xianlin

  I have an web application server running tomcat and i need to publish my APIs to internet users. However I don't have a domain name for this server and I can only put the ip address of this server (e.g. 145.XXX.XXX.XXX) to point out where my API xml files are located. I have another web server running with a domain name "http://www.webserver.com" registered on the internet and I want to make use of its domain name to server my web application server API xml files location. How can I do that? using "www.webserver.com/api" or using "api.webserver.com"? which is better? Also I wonder if I want to publish a "rstp://145.XXX.XXX.XXX" web link for video streaming purpose, can I use "rstp://www.webserver.com/api" to replace it and how to do it? I always thought the url contain domain sub-directory name cannot point to another IP address, it only can point to another folder location on the webserver itself.

  Read the article

• NIC Teaming HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server NIC TEaming. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB/TLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• Dual Home HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server dual homing. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• Streaming audio to mobile phones, what technology to use ?

  - by Alx

  I'm planning on building an application where audio media is going to be streamed to the mobile phone for the user to listen. The targets are smartphones: iPhone/Blackberry/Android/(J2ME ?). I see that streaming on iPhone has to be done with HTTP Live streaming, but I don't see it supported by other platforms. Should I broadcast the streams via rstp ? http ? Is there any way to use a unified solution for all the different mobile platform ? If anyone already had to go through this, help would be gratly appreciated.

  Read the article

• Setup of HP ProCurve 2810-24G for iSCSI?

  - by 3molo

  Hi, I have a pair of ProCurve 2810-24G that I will use with a Dell Equallogic SAN and Vmware ESXi. Since ESXi does MPIO, I am a little uncertain on the configuration for links between the switches. Is a trunk the right way to go between the switches? I know that the ports for the SAN and the ESXi hosts should be untagged, so does that mean that I want tagged VLAN on the trunk ports? This is more or less the configuration: trunk 1-4 Trk1 Trunk snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 24,Trk1 ip address 10.180.3.1 255.255.255.0 no untagged 5-23 exit vlan 801 name "Storage" untagged 5-23 tagged Trk1 jumbo exit no fault-finder broadcast-storm stack commander "sanstack" spanning-tree spanning-tree Trk1 priority 4 spanning-tree force-version RSTP-operation The Equallogic PS4000 SAN has two controllers, with two network interfaces each. Dell recommends each controller to be connected to each of the switches. From vmware documentation, it seems creating one vmkernel per pNIC is recommended. With MPIO, this could allow for more than 1 Gbps throughput.

  Read the article

• VLAN with trunk to avoid broadcast storm in a network with redundant paths

  - by liv2hak

  I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. I create VLAN2 with the following configuration SW3 - Port 12,Port 22. SW6 - Port 14 I create VLAN3 with the following configuration SW3 - Port 0 SW6 - Port 0 I also configure a VLAN trunk between SW3 and SW6 using the following commands. edit interfaces ge-0/0/12 set unit 0 family ethernet-switching port-mode trunk edit interfaces ge-0/0/12 set unit 0 family ethernet-switching vlan members all There is a redundant path in the network as the loop between SW3 and SW6 is closed.There is no broadcast storm in the network? What is the reason for this? I have not enabled STP or RSTP.still there is no broadcast storm.what is the reason for this. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

  Read the article

• what is the best way to stream a audio file to website users/listners

  - by Naveen Chamikara Gamage

  I'm developing a music site which will stream audio files stored in a server to users, audio files will be played through flash player placed in a webpage.. As I heard I need to use a streaming media server for streaming audio files ( like 2mb to 3mb in size).. Do I need to use one? I found some streaming media server softwares like http://www.icecast.org - but as in their documentation, It is used for streaming radio stations and live streaming purposes, but I just need to stream audio files faster and in low size (low bandwidth) with good quality.. I heard I need to encode the audio files first and then send them to listeners and in their end audio files need to be decoded again. Is that true? How can I do that? if I need to use a special web server, where should I host my files? Any good hosting providers? if I host audio files in a normal web server, they will use HTTP or TCP to deliver my audio files to users/ listners but I found that HTTP and TCP are not good ways to use for multi media purposes like streaming audio and video files, and they are used for delivering HTML and stuff. I found I should use RSTP or UDP for streaming audio files.. What should I use? I know that .MP3 files has much better quality than the other formats but it also gives huge size to the audio files.. which format should I use for audio files? Most of the best quality audio files are more than 7mb so I'm planning to convert them my self using a software so I could get low size files with some level of good quality. If I'm converting my audio files what is the good BITRATE I should use for my files? Any known best softwares for converting audio files while keeping quality in a good level? Note** - I know that I will not need complex requirements at the beginning of the site but I wanted to what are the best ways like they are using for soundcloud.com

  Read the article

• WDS 2008 R2 DHCP Error

  - by scampbell

  Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment' when booting from a standard WDS boot.wim image taken from a Windows 7 DVD. I am using Server 2008 R2 and am adding the drivers to the boot using WDS, but also have the problem if the drivers are injected beforehand using DISM. When the error occurs I can shift + F10 and IPCONFIG and see it HAS picked up an internal IP from DHCP. Seems maybe it is timing out before it gets the IP? DHCP server is not on the WDS box but is in the same subnet. As per some fixes I have read I enabled RSTP on my switches but that didnt help. I have included the end of setupact.log to see if any of you have any ideas. Seems to be failing but as I say, the network IS initialized as I can see the internal IP assigned by DHCP when running IPCONFIG. I dont suppose theres any way of increasing the timeout? Thanks. 2011-04-11 17:26:31, Info [0x0b0022] WDS StartNetworking: Trying to start networking. 2011-04-11 17:26:31, Info WDS Network service dhcp not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service lmhosts not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service lanmanworkstation not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service bfe not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service ikeext not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service mpssvc not running or could not be queried: 264e18 1 1 2011-04-11 17:27:24, Info WDS Installing device pci\ven_14e4&dev_1691&subsys_04aa1028 X:\WINDOWS\INF\oem37.inf succeeded 2011-04-11 17:27:25, Info WDS No computer name specified, generating a random name. 2011-04-11 17:27:25, Info WDS Renaming computer to MININT-VN2P876. 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Service winmgmt disable: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt stop: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt enable: 0x00000000 2011-04-11 17:27:25, Info WDS Released profiling mutex 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Install MS_MSCLIENT: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_NETBIOS: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_SMB: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_TCPIP6: 0x0004a020 2011-04-11 17:27:26, Info WDS Install MS_TCPIP: 0x0004a020 2011-04-11 17:27:26, Info WDS Service dhcp start: 0x00000000 2011-04-11 17:27:26, Info WDS Service lmhosts start: 0x00000000 2011-04-11 17:27:26, Info WDS Service ikeext start: 0x00000000 2011-04-11 17:27:26, Info WDS Service mpssvc start: 0x00000000 2011-04-11 17:27:26, Info WDS Released profiling mutex 2011-04-11 17:27:26, Info WDS Spent 967ms installing network components 2011-04-11 17:27:28, Info WDS Spent 2247ms installing network drivers 2011-04-11 17:27:38, Info WDS QueryAdapterStatus: no operational adapters found. 2011-04-11 17:27:38, Info WDS Spent 10140ms confirming network initialization; status 0x80004005 2011-04-11 17:27:38, Info WDS WaitForNetworkToInitialize failed; ignoring error 2011-04-11 17:27:38, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set: 2011-04-11 17:27:38, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb] 2011-04-11 17:27:38, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment.]

  Read the article

1