Search Results

Search found 36 results on 2 pages for 'shorewall'.

Page 1/2 | 1 2  | Next Page >

• Bridge and OpenVPN with shorewall

  - by Javier Martinez

  I have this scenario and everything it's working OK, but I want to configure my Shorewall and I can't do it. My interfaces are: br0 (bridge of eth0) tun0 (OpenVPN) vnet* (each one of bridged interfaces with public IP's) Public Main IP: 188.165.X.Y OpenVPN IP's: 172.28.0.x Bridge: public ip's So, I have the next configuration for shorewall: /etc/shorewall/zones #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall inet ipv4 road ipv4 /etc/shorewall/interfaces #ZONE INTERFACE BROADCAST OPTIONS inet br0 detect routeback road tun+ detect routeback /etc/shorewall/policy #SOURCE DEST POLICY LOG LIMIT: CONNLIMIT: # LEVEL BURST MASK $FW all ACCEPT inet $FW DROP info road all DROP inet road DROP /etc/shorewall/tunnels #TYPE ZONE GATEWAY GATEWAY # ZONE openvpnserver:1194 inet 0.0.0.0/0 The problem is that even with shorewall running I am able to ping or connect to the virtual machines behind the bridge

  Read the article

• Shorewall SHOW DYNAMIC command doesn't work

  - by Andrew Burns

  Setting up shorewall dynamic zones, http://shorewall.net/Dynamic.html shows the command shorewall show dynamic zone where zone is one of your zones. I can get the add and delete commands to work, but not the show dynamic command. Here is a shell session, with output from ipset list that proves that the items are indeed there. $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16520 References: 66 Members: 192.168.85.153 $ shorewall add br0:192.168.85.200 CPREM Host br0:192.168.85.200 added to zone CPREM $ shorewall show dynamic CPREM $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16536 References: 66 Members: 192.168.85.153 192.168.85.200 $ shorewall delete br0:192.168.85.200 CPREM Host br0:192.168.85.200 deleted from zone CPREM $ ipset list CPREM_br0 Name: CPREM_br0 Type: hash:ip Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16536 References: 66 Members: 192.168.85.153 I am using the packaged version from Ubuntu 12.04 (4.4.26.1-1)

  Read the article

• Uploads fail with shorewall enabled

  - by JamesArmes

  I have an Ubuntu 8.04 server with shorewall 4.0.6 installed. When I try to upload files using FTP, SCP, or cURL the file upload stalls almost immediatly and eventually times out. If I turn off shorewall then the uploads work fine. I don't have any rules that specifically allow FTP and I'm not too concerned with it, but I do need to be able to upload via 22 (SCP) and 80 & 443 (cURL). This is what my rules look like: COMMENT Allow Server to respond to any web (80) and SSL (443) requests ACCEPT net $FW tcp 80 ACCEPT $FW net tcp 80 ACCEPT net $FW tcp 443 ACCEPT $FW net tcp 443 COMMENT Allow Server to respond to SNMPD (161) requests ACCEPT net $FW udp 161 COMMENT Allow Server to respond to MySQL (3306) requests (for MySQL Graphing) ACCEPT net $FW tcp 3306 COMMENT Allow Server to respond to any SSH connection attempts, and to SSH out. SSH/ACCEPT net $FW SSH/ACCEPT $FW net COMMENT Allow Server to make DNS Requests out. DNS/ACCEPT $FW net COMMENT Default "close" anything else. Ping/REJECT net $FW ACCEPT $FW net icmp #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE I expected the top four ACCEPT lines to allow inbound and outbound traffic over 80 and 443 and I expected the two SSH/ACCEPT lines to allow inbound and outbound trffic over 22, including SCP. Any help is greatly appreciated. /etc/shorewall/policy contains the following (all lines above are commented out): # # Allow all connection requests from teh firewall to the internet # $FW net ACCEPT # # Policies for traffic originating from the Internet zone (net) # Drop (ignore) all connection requests from the Internet to the firewall # net all DROP info # THE FOLLOWING POLICY MUST BE LAST # Reject all other connection requests all all REJECT info #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE

  Read the article

• Sub-process /usr/bin/dpkg returned an error code (1)

  - by rohit

  Hey friends i am getting the following error when i am trying to purge shorewall root@aptosid:/etc# apt-get purge shorewall Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: shorewall* 0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded. 1 not fully installed or removed. After this operation, 1,843 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 212702 files and directories currently installed.) Removing shorewall ... : not found/shorewall: 25: /etc/default/shorewall: :q Stopping "Shorewall firewall": not done (check /var/log/shorewall-init.log). invoke-rc.d: initscript shorewall, action "stop" failed. dpkg: error processing shorewall (--purge): subprocess installed pre-removal script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: shorewall E: Sub-process /usr/bin/dpkg returned an error code (1) root@aptosid:/etc# please help me out ...........?

  Read the article

• Why can't I unblock postgres with shorewall?

  - by ryeguy

  I can't seem to unblock the port needed for postgres using Shorewall. I am developing a PHP app on my windows machine here, and then I upload it on my linux box to actually use it. The linux box runs the php files as well as hosts the db server. Since I need it working from both machines, in my PHP code I am referring to the database as the full IP instead of localhost. I can easily connect to postgres from my windows machine, but ironically, my PHP app can't connect to postgres even though it's on the same box. Here's what I have in /etc/shorewall/rules: #macro/action src dest PostgreSQL/ACCEPT net $FW PostgreSQL/ACCEPT loc $FW PostgreSQL/ACCEPT loc dmz PostgreSQL/ACCEPT net dmz PostgreSQL/ACCEPT loc net PostgreSQL/ACCEPT dmz $FW PostgreSQL/ACCEPT dmz loc PostgreSQL/ACCEPT dmz net PostgreSQL/ACCEPT dmz dmz Clearly I have a ton of crap there. The first line is all I needed to make it allow a connection from my windows machine. All the lines after it are me just trying everything to get it to work. What am I missing?

  Read the article

• Shorewall: temporarily drop incoming traffic except port 22?

  - by Magnetic_dud

  When I work on configuration files, especially of the mail server, I would like to temporarily drop all the incoming traffic except the port 22. So, I don't risk to lose incoming mails if I need to move the mail server to another server, or something like that. Using shorewall, how I could do that? I was thinking to create a rules file to divert all the traffic to a non-existant internal ip and switch it with the normal file when needed.

  Read the article

• shorewall masquerading from tun0 to ppp0

  - by damir

  First interface is ppp0 (pptp vpn) Second inteface is tun0 (openvpn) Third interface eth0 (default gw interface) Openvpn is set to change default route on client for all packets to go through tun0 vpn, that part is working ok. I would like to make all packets from tun0 go to ppp0 and get out from that interface (MASQ) but somehow they always end up on eth0 (default gw interface) /etc/shorewall/masq ppp0 tun0 doesn't seem to work

  Read the article

• Shaping with shorewall complex shaper not work (or I don't understand principle of operation)

  - by strangeman

  I have router (Debian 6) with 2 network interfaces (and 1 virtual tun interface): eth0 - localnet, 192.168.1.0/24, router ip is 192.168.1.1 eth1 - internet tun0 - openvpn to central office. openvpn network - 10.1.0.0/24, central office network - 192.168.0.0/24 I need shape all traffic, which moves 192.168.1.0/24-192.168.0.1:6666 and 192.168.1.0/24<-192.168.0.1:6666, and restrict its speed to 200kbit. Now, I have this configuration, but its not work: tcdevices (set up interface parameters) #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 100mbit 100mbit #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcrules (mark all traffic, which move on 6666 port) #MARK SOURCE DEST PROTO PORT(S) 1 0.0.0.0/0 0.0.0.0/0 tcp 6666 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcclasses (shape all marked traffic) #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth0 1 200kbit 200kbit 2 eth0 255 9*full/10 full 1 default #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Where is my mistake?

  Read the article

• Shorewall log question.

  - by Shikoru

  I have been getting various attempts to connect to ports on my shorewall firewall. The ports that I keep seeing connection attempts at are tcp 44444, tcp 44446, udp 55555 and every now and then some slight variation. I ran "netstat -a" and did not see anything listening on those ports. Is this something that I should be worried about or is it just some rouge computers out there? I have noticed alot of the ip addresses are from Spain and Mexico. May 25 18:39:35 Takkun kernel: [62516.626514] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=200.124.9.113 DST=72.xxx.xxx.xxx LEN=48 TOS=0x00 PREC=0x00 TTL=112 ID=51796 DF PROTO=TCP SPT=2071 DPT=44446 WINDOW=16384 RES=0x00 SYN URGP=0 May 25 18:39:52 Takkun kernel: [62535.433285] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=72.50.95.174 DST=72.xxx.xxx.xxx LEN=90 TOS=0x00 PREC=0x00 TTL=105 ID=31130 PROTO=UDP SPT=59505 DPT=55555 LEN=70 May 25 18:40:05 Takkun kernel: [62548.963413] Shorewall:net2fw:DROP:IN=eth0 OUT= MAC=00:d0:b7:65:d4:13:34:ef:xx:xx:xx:81:08:00 SRC=77.12.37.1 DST=72.xxx.xxx.xxx LEN=90 TOS=0x00 PREC=0x00 TTL=108 ID=9585 PROTO=UDP SPT=20401 DPT=55555 LEN=70 That is the jist of what im seeing.

  Read the article

• Debian Linux bridging router intermittently dropping packets [migrated]

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Can anybody help?

  Read the article

• How to DNAT to different local IP based on what public IP was accessed with Shorewall?

  - by mikl

  My server has several public IPs, and is running a bunch of virtual machines with private IP adresses. As an example, I want to map ports 80, 443 and 8080 on 232.21.23.23 (public) to 192.168.122.12 (private). I have tried a couple of different NAT mappings, but none of them seem to work: # This doesn't work. DNAT net loc:192.168.122.12 tcp 80,443,8080 - 232.21.23.23 # Neither does this. DNAT $FW loc:192.168.122.12 tcp 80,443,8080 - 232.21.23.23 # Nor this. DNAT net:232.21.23.23 loc:192.168.122.12 tcp 80,443,8080 # I have no idea what I'm doing. DNAT $FW:232.21.23.23 loc:192.168.122.12 tcp 80,443,8080 Can anyone point me in the right direction?

  Read the article

• Configure firewall (Shorewall/UFW) to allow traffic for services on an Ubuntu Server

  - by Niklas

  I have an Ubuntu Server 11.04 x64 which I want to secure. The server will be open to Internet and I want to be able to SSH/SFTP into the machine and the SSH-server runs on a custom set port. I also want a web server accessible from the Internet. These tasks seems not to hard to perform but I also want SAMBA-shares to be accessible from within the local network and this seems to be a bit trickier. If possible I also want to be able to "stealth" the ports necessary to protect the server further but also allow the SAMBA-shares to be automatically found within the local network. I've never configured firewalls before except for a router and I always bump into a bunch of problem when doing it all by myself so I was hoping for some tips or preferably a guide on how to this. Thank you! Update: On second thought I'd could just as likely go with UFW if the same settings are achievable ("stealth" ports).

  Read the article

• Easy shorewall question : allow ips to DNAT

  - by llazzaro

  Hello, At my home network I had a transparent proxy. This is the rule that forward all 80 traffic to my squid3.1 server at DMZ DNAT loc:!10.0.0.126 dmz:172.16.0.198:3128 tcp 80 - !172.16.0.198 Ok, I need to add more ips to avoid transparent proxy. I tried loc:!10.0.0.134,!10.0.0.126...but didnt work (also similars like [ip0,ip1]. I tried to google the answer cant find it (sorry no matches, not searching the right keywords) also I tried to read the docs, but they are really long (and indexes dont help me). Thanks!

  Read the article

• virtualbox port forwarding - firewall config

  - by Roose

  i have a ubuntu host system with virtualbox running a windows server. In Virtualbox i have configured the network with a NAT interface and port forwarding for the RDP deamon running inside the vm. That works really well - i can connect to the windows rdp service over the internet. TCP *:3389 - *:3389 Now i like to restrict the access to the rdp service to only 3 public ip addresses and have no idea how to do that via iptables / shorewall. Something like: ACCEPT net:91.x.x.x fw tcp 3389 (shorewall rule) isn't working. Would be glad for any hint.

  Read the article

• Linux Router - Share bandwidth per IPs with current active connections

  - by SRoe

  We have a Linux machine running as a custom router, currently utilising Shorewall. This sits between our incoming internet connection and the internal LAN. What we would like to achieve is 'fair use' of the bandwidth on a per IP basis. If only one person currently has an active connection then they get 100% utilisation of the line. However if 20 people have active connections then they should each get 5% utilisation of the line. This should be irrespective of the number of connections held by each user. For example, say we have two users, Bill and Ted, that both have active connections. Bill has a single active connection while Ted has ten active connections. Bill should get 50% utilisation for his single connections whilst Ted should get 5% utilisation for each of his ten connections, giving Ted a total utilisation of 50%.

  Read the article

• How can I redirect HTTPS(S) traffic to anothr gateway?

  - by PsyStyle

  I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. Al the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for this I am using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway without touching the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a dnat like DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case

  Read the article

• How can I redirect HTTP(S) traffic to another gateway?

  - by PsyStyle

  I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. All the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for that I'm using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway keeping untouched the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a DNAT like: DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case.

  Read the article

• Some HTTPS connections via NAT fail, but work on firewall itself.

  - by hnxn

  Hi, I am having trouble establishing some HTTPS connections from internal machines, even though these same connections work if initiated on the firewall itself. The firewall machine is running Ubuntu 10.04.1 and shorewall 4.4.6. The internet connection is Bell PPPoE DSL (in Canada). I have tried various MTU settings, it doesn't seem to make any difference. Other protocols (HTTP, FTP, etc) generally work. The problem seems to be limited to certain sites; this one never works from an internal machine, but always works from the firewall itself: From internal machine: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:51:31-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. ^C From firewall: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:58:28-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 840 [image/gif] Saving to: `corp_logo.gif' 2011-01-13 20:58:28 (149 MB/s) - `corp_logo.gif' saved [840/840] This URL always works from both internal and firewall: https://encrypted.google.com/images/logos/ssl_logo_lg.gif Any troubleshooting tips would be greatly appreciated!

  Read the article

• Service redirection on same network

  - by Unode

  I have a network on which I run multiple servers each dedicated to a given service. Because most services run on distinct ports I'm currently looking for a way of unifying "all" services into a single "proxy" machine. The idea is to abstract which machine is being accessed but still allow direct connection if needed/requested. This "proxy" machine has only one network interface which is part of the same network as all the other service providing machines. I've looked into Routing and NAT but I've so far failed to figure out how to make it work. I tried to achieve this using shorewall but couldn't find clear examples. However I'm not entirely sure this is the best/simplest strategy. With that said, what would be the best way of achieving this result? Example case: Proxy IP - Listening port - Send requests to 192.168.0.50 80 192.168.0.1:80 " 22 192.168.0.2:2222 " 3306 192.168.0.3:3000 " 5432 192.168.0.4:5432 " 5222 192.168.0.5:5222 PS: I'm not concerned with the single-point-of-failure nature of the proxy. Thanks

  Read the article

• Ubuntu 11.10 firewall/gateway - no client internet access

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• Router intermittently failing

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

  Read the article

• Proper web server setup

  - by DMin

  I just got myself a slicehost basic slice to play around with so I can learn how to setup web-servers. I have Ubuntu 10.04.2 installed on the server. I was able to successfully get the server up and running from scratch, these were the things I did - following this tutorial. I know this is probably just a starters tutorial, so, I was wondering if you guys can tell me what you like to do while setting up production servers. These are the steps that were followed : Update and Upgrade Ubuntu sudo apt-get install apache2 php5-mysql libapache2-mod-php5 mysql-server Backup a copy of and edit apache2.conf Set : 'ServerTokens Full' to 'ServerTokens Prod''ServerSignature On' to 'ServerSignature Off' Backup php.ini and then Change “expose_php = On” to “expose_php = Off” Restart Apache Install Shorewall firewall Configure Shorewall to only accept HTTP and SSH connections(in the rules file) Enable shorewall on startup Add the website to the server : sudo usermod -g www-data root sudo chown -R www-data:www-data /var/www sudo chmod -R 775 /var/www I want make this CommunityWiki but can't seem to find the option to do it. Please feel free to add any feedback on the processes and things I am doing right/wrong. Much appriciated, thanks! :)

  Read the article

• iptables: matching multiple ip addresses

  - by Tax

  Hi guys, I am working on a iptables rule to apply after my shorewall script has initialized my firewall. I want a spicific IP (10.0.1.19) address in my lan to be redirected to 10.0.64.1 except if it is going to paypal. I have the following rule, and that works like a charm iptables -t nat -A PREROUTING ! -d 1.2.3.4 -s 10.0.1.19 -j DNAT --to 10.0.64.1 My problem is that paypal uses multiple ip addresses, and I am not allowed to have multiple IP-addresses. https://ppmts.custhelp.com/cgi-bin/ppdts.cfg/php/enduser/std%5Fadp.php?p%5Ffaqid=92 On top of this problem I would like to know how to remove the rule again, without having to restart shorewall. Kind regards Tax

  Read the article

• Virtual Lan on the Cloud -- Help Confirm my understanding?

  - by marfarma

  [Note: Tried to post this over at ServerFault, but I don't have enough 'points' for more than one link. Powers that be, move this question over there.] Please give this a quick read and let me know if I'm missing something before I start trying to make this work. I'm not a systems admin professional, and I'd hate to end up banging my head into the wall if I can avoid it. Goals: Create a 'road-warrior' capable star shaped virtual LAN for consultants who spend the majority of their time on client sites, and who's firm has no physical network or servers. Enable CIFS access to a cloud-server based installation of Alfresco Allow Eventual implementation of some form of single-sign-on ( OpenLDAP server ) access to Alfresco and other server applications implemented in the future Given: All Servers will live in the public internet cloud (Rackspace Cloud Servers) OpenVPN Server will be a Linux disto, probably Ubuntu 9.x, installed on same server as Alfresco (at least to start) Staff will access server applications and resources from client sites, hotels, trains, planes, coffee shops or their homes over various ISP, using their company laptops or personal home desktops. Based on my Research thus far, to accomplish this, I'll need: OpenVPN with Bridging Enabled to create a star shaped "virtual" LAN http://openvpn.net/index.php/open-source/documentation/miscellaneous/76-ethernet-bridging.html A Road Warrior Network Configuration, as described in this Shorewall article (lower down the page) http://www.shorewall.net/OPENVPN.html Configure bridge addressesing (probably DHCP) http://openvpn.net/index.php/open-source/faq.html#bridge-addressing Configure CIFS / Samba to accept VPN IP address http://serverfault.com/questions/137933/howto-access-samba-share-over-vpn-tunnel Set up Client software, with keys configured for access (potentially through a OpenVPN-Sa client portal) http://www.openvpn.net/index.php/access-server/download-openvpn-as/221-installation-overview.html

  Read the article

• linux networking: how to redirect incoming connections from old server to new server?

  - by aliz

  hi I'm in the process of moving my old server to a new server, but i will keep the old server running for database replication and load balancing, etc. each server has a separate internet connection with a static ip, and they are connected through a local Ethernet connection. I've got Ubuntu 8.04 32-bit running on old server and Debian 6.0 64-bit on new one. shorewall firewall is installed on both servers. there are some outdoor devices which are periodically sending data to port 43597 for old server IP address. I can run multiple instances of the network service which is responsible for receiving data from devices on a server but on different ports. here's the question: how can I run the service on new server and have connections coming to old server redirected to it, and new devices can still connect to new server's IP address preferably on the same port and same service? until all devices get updated to send to new server. I've tried a shorewall DNAT rule, but seems like new server's default route should be changed to ethernet connection, which breaks other things. I also found about redir utility, but still haven't tried it. is there any best practice or simple solution for such a scenario, i'm not aware of? thanks in advance.

  Read the article

1 2  | Next Page >