Search Results

Search found 138 results on 6 pages for 'shr deadman'.

Page 1/6 | 1 2 3 4 5 6  | Next Page >

• Heartbeat won't successfully start up resources from a cold boot when a failed node is present

  - by Matthew

  I currently have two ubuntu servers running Heartbeat and DRBD. The servers are directory connected with a 1000Mbps crossover cable on eth1 and have access to an IP camera LAN on eth0. Now, let's say that one node is down and the remaining functional node is booting after having been shut down. The node that is still functioning won't start up heartbeat and provide access to the drbd resource from a cold boot. I have to manually restart heartbeat by sudo service heartbeat restart to get everything up and running. How can I get it to start fine from a cold start, when only one server is present? Here is the ha.cf: debug /var/log/ha-debug logfile /var/log/ha-log logfacility none keepalive 2 deadtime 10 warntime 7 initdead 60 ucast eth1 192.168.2.2 ucast eth0 10.1.10.201 node EMserver1 node EMserver2 respawn hacluster /usr/lib/heartbeat/ipfail ping 10.1.10.22 10.1.10.21 10.1.10.11 auto_failback off Some material from the syslog: harc[4604]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/status status mach_down[4632]: 2012/11/27_13:54:49 info: /usr/share/heartbeat/mach_down: nice_failback: foreign resources acquired mach_down[4632]: 2012/11/27_13:54:49 info: mach_down takeover complete for node emserver2. Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: Initial resource acquisition complete (T_RESOURCES(us)) Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: mach_down takeover complete. IPaddr[4679]: 2012/11/27_13:54:49 INFO: Resource is stopped Nov 27 13:54:49 EMserver1 heartbeat: [4605]: info: Local Resource acquisition completed. harc[4713]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/ip-request-resp ip-request-resp ip-request-resp[4713]: 2012/11/27_13:54:49 received ip-request-resp IPaddr::10.1.10.254 OK yes ResourceManager[4732]: 2012/11/27_13:54:50 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[4759]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 start IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated nic for 10.1.10.254: eth0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated netmask for 10.1.10.254: 255.255.255.0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: eval ifconfig eth0:0 10.1.10.254 netmask 255.255.255.0 broadcast 10.1.10.255 IPaddr[4804]: 2012/11/27_13:54:50 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/drbddisk r0 start Filesystem[4965]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 start Filesystem[5039]: 2012/11/27_13:54:50 INFO: Running start for /dev/drbd1 on /shr Filesystem[5033]: 2012/11/27_13:54:51 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:51 info: Running /etc/init.d/nfs-kernel-server start Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: Local Resource acquisition completed. (none) Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: local resource transition completed. Nov 27 13:57:46 EMserver1 heartbeat: [4586]: info: Heartbeat shutdown in progress. (4586) Nov 27 13:57:46 EMserver1 heartbeat: [5286]: info: Giving up all HA resources. ResourceManager[5301]: 2012/11/27_13:57:46 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[5372]: 2012/11/27_13:57:46 INFO: Running stop for /dev/drbd1 on /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: Trying to unmount /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: unmounted /shr successfully Filesystem[5366]: 2012/11/27_13:57:47 INFO: Success ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[5509]: 2012/11/27_13:57:47 INFO: ifconfig eth0:0 down IPaddr[5497]: 2012/11/27_13:57:47 INFO: Success Nov 27 13:57:47 EMserver1 heartbeat: [5286]: info: All HA resources relinquished. Nov 27 13:57:48 EMserver1 heartbeat: [4586]: info: killing /usr/lib/heartbeat/ipfail process group 4603 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBFIFO process 4589 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4590 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4591 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4592 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4593 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4594 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4595 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4596 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4597 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4598 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4599 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4589 exited. 11 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4596 exited. 10 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4598 exited. 9 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4590 exited. 8 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4595 exited. 7 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4591 exited. 6 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4592 exited. 5 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4593 exited. 4 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4597 exited. 3 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4594 exited. 2 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4599 exited. 1 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: emserver1 Heartbeat shutdown complete. Here is some more from the log ResourceManager[2576]: 2012/11/28_16:32:42 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[2602]: 2012/11/28_16:32:42 INFO: Running OK Filesystem[2653]: 2012/11/28_16:32:43 INFO: Running OK Nov 28 16:32:52 EMserver1 heartbeat: [1695]: WARN: node emserver2: is dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Dead node emserver2 gave up resources. Nov 28 16:32:52 EMserver1 ipfail: [1807]: info: Status update: Node emserver2 now has status dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Link emserver2:eth1 dead. Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: NS: We are still alive! Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: Link Status update: Link emserver2/eth1 now has status dead Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Asking other side for ping node count. Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Checking remote count of ping nodes. Nov 28 16:32:57 EMserver1 heartbeat: [1695]: info: Heartbeat shutdown in progress. (1695) Nov 28 16:32:57 EMserver1 heartbeat: [2734]: info: Giving up all HA resources. ResourceManager[2751]: 2012/11/28_16:32:57 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[2829]: 2012/11/28_16:32:57 INFO: Running stop for /dev/drbd1 on /shr Filesystem[2829]: 2012/11/28_16:32:57 INFO: Trying to unmount /shr Filesystem[2829]: 2012/11/28_16:32:58 INFO: unmounted /shr successfully Filesystem[2823]: 2012/11/28_16:32:58 INFO: Success ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[2971]: 2012/11/28_16:32:58 INFO: ifconfig eth0:0 down IPaddr[2958]: 2012/11/28_16:32:58 INFO: Success Nov 28 16:32:58 EMserver1 heartbeat: [2734]: info: All HA resources relinquished. Nov 28 16:32:59 EMserver1 heartbeat: [1695]: info: killing /usr/lib/heartbeat/ipfail process group 1807 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBFIFO process 1777 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1778 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1779 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1780 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1781 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1782 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1783 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1784 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1785 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1786 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1787 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1778 exited. 11 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1779 exited. 10 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1780 exited. 9 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1781 exited. 8 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1782 exited. 7 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1783 exited. 6 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1784 exited. 5 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1785 exited. 4 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1786 exited. 3 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1787 exited. 2 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1777 exited. 1 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: emserver1 Heartbeat shutdown complete. If I restarted heartbeat at this point... the resources heartbeat controls would start up fine.... please help!

  Read the article

• jQuery selectable() elements update values

  - by Josh

  Basically what I'm trying to do is update the value attribute of a hidden input field contained within the selected element when the selectable() UI stops running. If the element is selected, then the input's value should be the name attribute of that particular LI, whereas if the element is not selected, the value should be updated as empty. HTML Sample: <ul id="selector"> <li class="networkicon shr-digg" name="shr-digg"> <div></div> <label>Digg</label> <input type="hidden" value="" name="bookmark[]" /> </li> <li class="networkicon shr-reddit" name="shr-reddit"> <div></div> <label>Reddit</label> <input type="hidden" value="" name="bookmark[]" /> </li> <li class="networkicon shr-newsvine" name="shr-newsvine"> <div></div> <label>Newsvine</label> <input type="hidden" value="" name="bookmark[]" /> </li> </ul> Script Sample: $(function() { $("#selector").selectable({ filter: 'li', selected: function(event, ui) { $(".ui-selected").each(obj, function() { $(this).children('input').val($(this).attr('name')); }); }, unselected: function(event, ui) { $(".ui-selected").each(obj, function() { $(this).children('input').val(''); }); } }); });

  Read the article

• Scan for first zero bit (Assembly)?

  - by cthulhu

  I have some numbers in AH, AL, BL, BH registers. I need to check whether there is 0 bit in each of the registers in left half of the number. If yes, then put into check variable value 10 else -10. How can I do this? I tried something like that: org 100h check dw 0 mov ah, 11111111b mov al, 11111111b mov bl, 11111111b mov bh, 11111111b mov check, -10 shr ah, 4 shr al, 4 shr bl, 4 shr bh, 4 cmp ah, 0Fh jz first first: cmp al, 0Fh jz second second: cmp bl, 0Fh jz third third: cmp bh, 0Fh jz final final: mov check, 10 ret

  Read the article

• Scripting Windows Shares - VBS

  - by Calvin Piche

  So i am totally new to VBS, never used it. I am trying to create multiple shares and i found a Microsoft VBS script that can do this(http://gallery.technet.microsoft.com/scriptcenter/6309d93b-fcc3-4586-b102-a71415244712) My question is, this script only allows for one domain group or user to be added for permissions where i am needing to add a couple with different permissions(got that figured out) Below is the script that i have modified for my needs but just need to add in the second group with the other permissions. If there is an easier way to do this please let me know. 'ShareSetup.vbs '========================================================================== Option Explicit Const FILE_SHARE = 0 Const MAXIMUM_CONNECTIONS = 25 Dim strComputer Dim objWMIService Dim objNewShare strComputer = "." Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2") Set objNewShare = objWMIService.Get("Win32_Share") Call sharesec ("C:\Published Apps\Logs01", "Logs01", "Log01", "Support") Call sharesec2 ("C:\Published Apps\Logs01", "Logs01", "Log01", "Domain Admins") Sub sharesec(Fname,shr,info,account) 'Fname = Folder path, shr = Share name, info = Share Description, account = account or group you are assigning share permissions to Dim FSO Dim Services Dim SecDescClass Dim SecDesc Dim Trustee Dim ACE Dim Share Dim InParam Dim Network Dim FolderName Dim AdminServer Dim ShareName FolderName = Fname AdminServer = "\\" & strComputer ShareName = shr Set Services = GetObject("WINMGMTS:{impersonationLevel=impersonate,(Security)}!" & AdminServer & "\ROOT\CIMV2") Set SecDescClass = Services.Get("Win32_SecurityDescriptor") Set SecDesc = SecDescClass.SpawnInstance_() 'Set Trustee = Services.Get("Win32_Trustee").SpawnInstance_ 'Trustee.Domain = Null 'Trustee.Name = "EVERYONE" 'Trustee.Properties_.Item("SID") = Array(1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0) Set Trustee = SetGroupTrustee("domain", account) 'Replace ACME with your domain name. 'To assign permissions to individual accounts use SetAccountTrustee rather than SetGroupTrustee Set ACE = Services.Get("Win32_Ace").SpawnInstance_ ACE.Properties_.Item("AccessMask") = 1179817 ACE.Properties_.Item("AceFlags") = 3 ACE.Properties_.Item("AceType") = 0 ACE.Properties_.Item("Trustee") = Trustee SecDesc.Properties_.Item("DACL") = Array(ACE) Set Share = Services.Get("Win32_Share") Set InParam = Share.Methods_("Create").InParameters.SpawnInstance_() InParam.Properties_.Item("Access") = SecDesc InParam.Properties_.Item("Description") = "Public Share" InParam.Properties_.Item("Name") = ShareName InParam.Properties_.Item("Path") = FolderName InParam.Properties_.Item("Type") = 0 Share.ExecMethod_ "Create", InParam End Sub Sub sharesec2(Fname,shr,info,account) 'Fname = Folder path, shr = Share name, info = Share Description, account = account or group you are assigning share permissions to Dim FSO Dim Services Dim SecDescClass Dim SecDesc Dim Trustee Dim ACE2 Dim Share Dim InParam Dim Network Dim FolderName Dim AdminServer Dim ShareName FolderName = Fname AdminServer = "\\" & strComputer ShareName = shr Set Services = GetObject("WINMGMTS:{impersonationLevel=impersonate,(Security)}!" & AdminServer & "\ROOT\CIMV2") Set SecDescClass = Services.Get("Win32_SecurityDescriptor") Set SecDesc = SecDescClass.SpawnInstance_() 'Set Trustee = Services.Get("Win32_Trustee").SpawnInstance_ 'Trustee.Domain = Null 'Trustee.Name = "EVERYONE" 'Trustee.Properties_.Item("SID") = Array(1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0) Set Trustee = SetGroupTrustee("domain", account) 'Replace ACME with your domain name. 'To assign permissions to individual accounts use SetAccountTrustee rather than SetGroupTrustee Set ACE2 = Services.Get("Win32_Ace").SpawnInstance_ ACE2.Properties_.Item("AccessMask") = 1179817 ACE2.Properties_.Item("AceFlags") = 3 ACE2.Properties_.Item("AceType") = 0 ACE2.Properties_.Item("Trustee") = Trustee SecDesc.Properties_.Item("DACL") = Array(ACE2) End Sub Function SetAccountTrustee(strDomain, strName) set objTrustee = getObject("Winmgmts: {impersonationlevel=impersonate}!root/cimv2:Win32_Trustee").Spawninstance_ set account = getObject("Winmgmts: {impersonationlevel=impersonate}!root/cimv2:Win32_Account.Name='" & strName & "',Domain='" & strDomain &"'") set accountSID = getObject("Winmgmts: {impersonationlevel=impersonate}!root/cimv2:Win32_SID.SID='" & account.SID &"'") objTrustee.Domain = strDomain objTrustee.Name = strName objTrustee.Properties_.item("SID") = accountSID.BinaryRepresentation set accountSID = nothing set account = nothing set SetAccountTrustee = objTrustee End Function Function SetGroupTrustee(strDomain, strName) Dim objTrustee Dim account Dim accountSID set objTrustee = getObject("Winmgmts: {impersonationlevel=impersonate}!root/cimv2:Win32_Trustee").Spawninstance_ set account = getObject("Winmgmts:{impersonationlevel=impersonate}!root/cimv2:Win32_Group.Name='" & strName & "',Domain='" & strDomain &"'") set accountSID = getObject("Winmgmts: {impersonationlevel=impersonate}!root/cimv2:Win32_SID.SID='" & account.SID &"'") objTrustee.Domain = strDomain objTrustee.Name = strName objTrustee.Properties_.item("SID") = accountSID.BinaryRepresentation set accountSID = nothing set account = nothing set SetGroupTrustee = objTrustee End Function

  Read the article

• Sublime text 2 syntax highlighter?

  - by BigSack

  I have coded my first custom syntax highlighter for sublime text 2, but i don't know how to install it. It is based on notepad++ highlighter found here https://70995658-a-62cb3a1a-s-sites.googlegroups.com/site/lohanplus/files/smali_npp.xml?attachauth=ANoY7criVTO9bDmIGrXwhZLQ_oagJzKKJTlbNDGRzMDVpFkO5i0N6hk_rWptvoQC1tBlNqcqFDD5NutD_2vHZx1J7hcRLyg1jruSjebHIeKdS9x0JCNrsRivgs6DWNhDSXSohkP1ZApXw0iQ0MgqcXjdp7CkJJ6pY_k5Orny9TfK8UWn_HKFsmPcpp967NMPtUnd--ad-BImtkEi-fox2tjs7zc5LabkDQ%3D%3D&attredirects=0&d=1 <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>fileTypes</key> <array> <string>smali</string> </array> <dict> <key>Word1</key> <string>add-double add-double/2addr add-float add-float/2addr add-int add-int/2addr add-int/lit16 add-int/lit8 add-long add-long/2addr aget aget-boolean aget-byte aget-char aget-object aget-short aget-wide and-int and-int/2addr and-int/lit16 and-int/lit8 and-long and-long/2addr aput aput-boolean aput-byte aput-char aput-object aput-short aput-wide array-length check-cast cmp-long cmpg-double cmpg-float cmpl-double cmpl-float const const-class const-string const-string-jumbo const-wide const-wide/16 const-wide/32 const-wide/high16 const/16 const/4 const/high16 div-double div-double/2addr div-float div-float/2addr div-int div-int/2addr div-int/lit16 div-int/lit8 div-long div-long/2addr double-to-float double-to-int double-to-long execute-inline fill-array-data filled-new-array filled-new-array/range float-to-double float-to-int float-to-long goto goto/16 goto/32 if-eq if-eqz if-ge if-gez if-gt if-gtz if-le if-lez if-lt if-ltz if-ne if-nez iget iget-boolean iget-byte iget-char iget-object iget-object-quick iget-quick iget-short iget-wide iget-wide-quick instance-of int-to-byte int-to-char int-to-double int-to-float int-to-long int-to-short invoke-direct invoke-direct-empty invoke-direct/range invoke-interface invoke-interface/range invoke-static invoke-static/range invoke-super invoke-super-quick invoke-super-quick/range invoke-super/range invoke-virtual invoke-virtual-quick invoke-virtual-quick/range invoke-virtual/range iput iput-boolean iput-byte iput-char iput-object iput-object-quick iput-quick iput-short iput-wide iput-wide-quick long-to-double long-to-float long-to-int monitor-enter monitor-exit move move-exception move-object move-object/16 move-object/from16 move-result move-result-object move-result-wide move-wide move-wide/16 move-wide/from16 move/16 move/from16 mul-double mul-double/2addr mul-float mul-float/2addr mul-int mul-int/2addr mul-int/lit8 mul-int/lit16 mul-long mul-long/2addr neg-double neg-float neg-int neg-long new-array new-instance nop not-int not-long or-int or-int/2addr or-int/lit16 or-int/lit8 or-long or-long/2addr rem-double rem-double/2addr rem-float rem-float/2addr rem-int rem-int/2addr rem-int/lit16 rem-int/lit8 rem-long rem-long/2addr return return-object return-void return-wide rsub-int rsub-int/lit8 sget sget-boolean sget-byte sget-char sget-object sget-short sget-wide shl-int shl-int/2addr shl-int/lit8 shl-long shl-long/2addr shr-int shr-int/2addr shr-int/lit8 shr-long shr-long/2addr sparse-switch sput sput-boolean sput-byte sput-char sput-object sput-short sput-wide sub-double sub-double/2addr sub-float sub-float/2addr sub-int sub-int/2addr sub-int/lit16 sub-int/lit8 sub-long sub-long/2addr throw throw-verification-error ushr-int ushr-int/2addr ushr-int/lit8 ushr-long ushr-long/2addr xor-int xor-int/2addr xor-int/lit16 xor-int/lit8 xor-long xor-long/2addr</string> </dict> <dict> <key>Word2</key> <string>v0 v1 v2 v3 v4 v5 v6 v7 v8 v9 v10 v11 v12 v13 v14 v15 v16 v17 v18 v19 v20 v21 v22 v23 v24 v25 v26 v27 v28 v29 v30 v31 v32 v33 v34 v35 v36 v37 v38 v39 v40 v41 v42 v43 v44 v45 v46 v47 v48 v49 v50 p0 p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30</string> </dict> <dict> <key>Word3</key> <string>array-data .catch .catchall .class .end .end\ local .enum .epilogue .field .implements .line .local .locals .parameter .prologue .registers .restart .restart\ local .source .subannotation .super</string> </dict> <dict> <key>Word4</key> <string>abstract bridge constructor declared-synchronized enum final interface native private protected public static strictfp synchronized synthetic system transient varargs volatile</string> </dict> <dict> <key>Word4</key> <string>(&quot;0)&quot;0</string> </dict> <dict> <key>Word5</key> <string>.method .annotation .sparse-switch .packed-switch</string> </dict> <dict> <key>word6</key> <string>.end\ method .end\ annotation .end\ sparse-switch .end\ packed-switch</string> </dict> <dict> <key>word7</key> <string>&quot; ( ) , ; { } &gt;</string> </dict> <key>uuid</key> <string>27798CC6-6B1D-11D9-B8FA-000D93589AF6</string> </dict> </plist>

  Read the article

• How to undo DROP Table [mysql]?

  - by deadman

  I accidentally dropped all tables. Can I restore back? I don't have the backup copy.

  Read the article

• cURL or SSL problems, how to solve?

  - by deadman

  I keep getting this error: No cURL data returned for https://XXX.XXXX.XXX:XXXX [0] SSL certificate problem, verify that the CA cert is OK. Details: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed I am not sure, or I could say, I dont know what is this problem. And how to solve this? Please help!

  Read the article

• Is there a limit that a folder can store how many files and folders?

  - by deadman

  I have this folder, called it 'X'. Currently, it has 40k folders and 70k files. I am abit worried, inside are the images. Is there a limit that the folder 'X' can store? That folder is important, it stores my current users images. Please advise? Or should I store in database (BLOB)? I am using mysql. Please advise.

  Read the article

• How does loop address alignment affect the speed on Intel x86_64?

  - by Alexander Gololobov

  I'm seeing 15% performance degradation of the same C++ code compiled to exactly same machine instructions but located on differently aligned addresses. When my tiny main loop starts at 0x415220 it's faster then when it is at 0x415250. I'm running this on Intel Core2 Duo. I use gcc 4.4.5 on x86_64 Ubuntu. Can anybody explain the cause of slowdown and how I can force gcc to optimally align the loop? Here is the disassembly for both cases with profiler annotation: 415220 576 12.56% |XXXXXXXXXXXXXX 48 c1 eb 08 shr $0x8,%rbx 415224 110 2.40% |XX 0f b6 c3 movzbl %bl,%eax 415227 0.00% | 41 0f b6 04 00 movzbl (%r8,%rax,1),%eax 41522c 40 0.87% | 48 8b 04 c1 mov (%rcx,%rax,8),%rax 415230 806 17.58% |XXXXXXXXXXXXXXXXXXX 4c 63 f8 movslq %eax,%r15 415233 186 4.06% |XXXX 48 c1 e8 20 shr $0x20,%rax 415237 102 2.22% |XX 4c 01 f9 add %r15,%rcx 41523a 414 9.03% |XXXXXXXXXX a8 0f test $0xf,%al 41523c 680 14.83% |XXXXXXXXXXXXXXXX 74 45 je 415283 ::Run(char const*, char const*)+0x4b3 41523e 0.00% | 41 89 c7 mov %eax,%r15d 415241 0.00% | 41 83 e7 01 and $0x1,%r15d 415245 0.00% | 41 83 ff 01 cmp $0x1,%r15d 415249 0.00% | 41 89 c7 mov %eax,%r15d 415250 679 13.05% |XXXXXXXXXXXXXXXX 48 c1 eb 08 shr $0x8,%rbx 415254 124 2.38% |XX 0f b6 c3 movzbl %bl,%eax 415257 0.00% | 41 0f b6 04 00 movzbl (%r8,%rax,1),%eax 41525c 43 0.83% |X 48 8b 04 c1 mov (%rcx,%rax,8),%rax 415260 828 15.91% |XXXXXXXXXXXXXXXXXXX 4c 63 f8 movslq %eax,%r15 415263 388 7.46% |XXXXXXXXX 48 c1 e8 20 shr $0x20,%rax 415267 141 2.71% |XXX 4c 01 f9 add %r15,%rcx 41526a 634 12.18% |XXXXXXXXXXXXXXX a8 0f test $0xf,%al 41526c 749 14.39% |XXXXXXXXXXXXXXXXXX 74 45 je 4152b3 ::Run(char const*, char const*)+0x4c3 41526e 0.00% | 41 89 c7 mov %eax,%r15d 415271 0.00% | 41 83 e7 01 and $0x1,%r15d 415275 0.00% | 41 83 ff 01 cmp $0x1,%r15d 415279 0.00% | 41 89 c7 mov %eax,%r15d

  Read the article

• Firefox messages in /var/log/messages

  - by Roy

  I happened to be browsing through /var/log/messages for another reason, and I stumbled across some messages apparently related to Firefox like this: Apr 5 15:36:59 myserver kernel: [18091.188462] type=1503 audit(1333658219.144:19): operation="open" pid=6396 parent=1 profile="/usr/lib/firefox-11.0/firefox{,*[^s][^h]}" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/shr/RiverTrip.gpx" which are really puzzling me because I really don't see why Firefox would know about these files let alone output messages about them. The /shr directory is an NTFS partition I set up on my laptop so I can access it with either Ubuntu or Windows XP. The messages are consistently showing up for a few of the files in that directory, but not all. I haven't even looked at those files or done anything else with them in a long time! I have no idea what's special with those files; they appear to be picked at random as far as I can tell. I am using Ubuntu Release 10.04 (lucid), Kernel Linux 2.6.32-38, GNOME 2.30.2, Firefox 11.0 . I hope someone can explain these spooky messages!

  Read the article

• Certificate Trust Lists and IIS7

  - by Neil Deadman

  I need to generate a CTL for use with IIS7. I generated a CTL file using MakeCTL (on Win2k3 SDK) and put only my own RootCA certificate in the CTL. However, when I then use adsutil.vbs to set my website to use this CTL, I get: ErrNumber: -2147023584 (0x80070520) Error Trying To SET the Property: SslCtlIdentifier I'm using adsutil.vbs like this: cscript adsutil.vbs set w3svc/2/SslCtlIdentifier where is the friendly name of the CTL The problem is, I am not able to set a friendly name. At the end of the wizard it says "Friendly Name: ". In IIS6 I can create a CTL with a friendly name (showing in Certificates MMC) but if I export it from there, when I import it, it no longer has a friendly name. Can anyone show me how to do it please?

  Read the article

• Delphi label and asm weirdness?

  - by egon

  I written an asm function in Delphi 7 but it transforms my code to something else: function f(x: Cardinal): Cardinal; register; label err; asm not eax mov edx,eax shr edx, 1 and eax, edx bsf ecx, eax jz err mov eax, 1 shl eax, cl mov edx, eax add edx, edx or eax, edx ret err: xor eax, eax end; // compiled version f: push ebx // !!! not eax mov edx,eax shr edx, 1 and eax, edx bsf ecx, eax jz +$0e mov eax, 1 shl eax, cl mov edx, eax add edx, edx or eax, edx ret err: xor eax, eax mov eax, ebx // !!! pop ebx // !!! ret // the almost equivalent without asm function f(x: Cardinal): Cardinal; var c: Cardinal; begin x := not x; x := x and x shr 1; if x <> 0 then begin c := bsf(x); // bitscanforward x := 1 shl c; Result := x or (x shl 1) end else Result := 0; end; Why does it generate push ebx and pop ebx? And why does it do mov eax, ebx? It seems that it generates the partial stack frame because of the mov eax, ebx. This simple test generates mov eax, edx but doesn't generate that stack frame: function asmtest(x: Cardinal): Cardinal; register; label err; asm not eax and eax, 1 jz err ret err: xor eax, eax end; // compiled asmtest: not eax and eax, $01 jz +$01 ret xor eax, eax mov eax, edx // !!! ret It seems that it has something to do with the label err. If I remove that I don't get the mov eax, * part. Why does this happen? Made a bug report on Quality Central.

  Read the article

• Convert CRC-CCITT Kermit 16 DELPHI code to C#

  - by Mehdi Anis

  I am working on a function that will give me a Kermit CRC value from a HEX string. I have a piece of code in DELPHI. I am a .NET developer and need the code in C#. function CRC_16(cadena : string):word; var valuehex : word; i: integer; CRC : word; Begin CRC := 0; for i := 1 to length(cadena) do begin valuehex := ((ord(cadena[i]) XOR CRC) AND $0F) * $1081; CRC := CRC SHR 4; CRC := CRC XOR valuehex; valuehex := (((ord(cadena[i]) SHR 4) XOR LO(CRC)) AND $0F); CRC := CRC SHR 4; CRC := CRC XOR (valuehex * $1081); end; CRC_16 := (LO(CRC) SHL 8) OR HI(CRC); end; I got the code from this webpage: Kermit CRC in DELPHI I guess that Delphi function is correct. If any one can please convert the code to C# that will be great. I tried to convert to C#, but got lost in WORD data type and the LO function of Delphi. Thank you all.

  Read the article

• I have an apache process that takes 98% CPU. How can I find what apache call it runs?

  - by Nir

  As you can see below, a single Apache process hangs and takes large amount of CPU resources. How can I find what http call this apache process runs? PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12554 www-data 20 0 776m 285m 199m R 97 3.7 67:15.84 apache2 14580 www-data 20 0 748m 372m 314m S 4 4.8 0:13.60 apache2 12561 www-data 20 0 784m 416m 322m S 3 5.4 0:58.10 apache2 12592 www-data 20 0 785m 427m 332m S 2 5.6 0:57.06 apache2

  Read the article

• Swap Utilization: System Level Versus Individual Process

  - by Max

  On my top output, at header level, swap is showing 0k used. But on each individual process the SWAP is shown as a non-zero value (output column enabled with option p). What does this mean? Swap: 4870140k total, 0k used, 4870140k free, 571300k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND 2448 max 20 0 323m 87m 27m S 0 4.4 1:23.31 236m chrome

  Read the article

• Xorg eating up too much RAM on Ubuntu 9.10 box

  - by Yang

  Xorg is eating up 444MB of 2GB total RAM on my Ubuntu 9.10 x86_64 machine with nvidia drivers installed for the nvidia G86 (GeForce 8300 GS). top shows: top - 18:21:41 up 6 days, 2:40, 9 users, load average: 0.46, 1.12, 1.22 Tasks: 266 total, 3 running, 262 sleeping, 1 stopped, 0 zombie Cpu(s): 8.4%us, 2.0%sy, 0.0%ni, 89.1%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055736k total, 1965136k used, 90600k free, 3952k buffers Swap: 979924k total, 979908k used, 16k free, 102636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1432 root 20 0 1154m 442m 7492 S 8 22.0 32:56.97 Xorg 18462 yang 20 0 1001m 219m 8356 S 0 10.9 5:13.25 chrome 24099 yang 20 0 865m 83m 13m S 0 4.2 0:06.91 chrome xrestop shows: xrestop - Display: :0.0 Monitoring 47 clients. XErrors: 0 Pixmaps: 40430K total, Other: 142K total, All: 40573K total res-base Wins GCs Fnts Pxms Misc Pxm mem Other Total PID Identifier 1c00000 21 46 1 19 697 9128K 18K 9146K 3169 x-nautilus-desktop 1000000 4 3 0 17 194 9000K 4K 9004K 3134 gnome-settings-daemon 1600000 51 2 1 25 1100 7648K 28K 7676K ? compiz For comparison, here's my other Ubuntu box, which also has compiz etc. enabled but with ATI RV370 (Radeon X300SE): top - 18:18:18 up 58 days, 4:27, 9 users, load average: 0.00, 0.00, 0.00 Tasks: 224 total, 1 running, 223 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.3%sy, 0.0%ni, 98.8%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024964k total, 987124k used, 37840k free, 247012k buffers Swap: 2048276k total, 94296k used, 1953980k free, 264744k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24324 yang 20 0 61936 35m 6364 S 0 3.5 4:35.84 nxagent 1768 ntop 20 0 190m 32m 5388 S 1 3.2 283:36.15 ntop 1178 root 20 0 60588 29m 1788 S 0 3.0 5:48.89 console-kit-dae ... 1315 root 20 0 343m 4956 4020 S 0 0.5 3:43.87 Xorg Any ideas on how to get to the bottom of this? (i.e. not "Log out"/"Reboot") Thanks in advance.

  Read the article

• big cpu load on vmware server / linux

  - by dezfafara

  Hi, I currently using a server 2.x hosting 4 virtual machines on a linux system Today, on my physical server, I saw an enormous load average: this is the "top" of the server, illustrating my 4 virtual guests. top - 11:02:02 up 194 days, 23:09, 5 users, load average: 18.78, 12.05, 13.55 Tasks: 113 total, 4 running, 109 sleeping, 0 stopped, 0 zombie Cpu0 : 71.6%us, 19.0%sy, 0.0%ni, 8.8%id, 0.0%wa, 0.3%hi, 0.3%si, 0.0%st Cpu1 : 74.3%us, 10.4%sy, 0.0%ni, 15.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 72.5%us, 17.6%sy, 0.0%ni, 9.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 79.5%us, 4.6%sy, 0.0%ni, 16.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8178884k total, 8129980k used, 48904k free, 134904k buffers Swap: 10490436k total, 148k used, 10490288k free, 6129728k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7312 root 6 -10 1149m 921m 559m R 97 11.5 107947:09 vmware-vmx 6995 root 6 -10 779m 687m 317m R 92 8.6 107374:31 vmware-vmx 6693 root 6 -10 880m 659m 409m S 85 8.3 76947:33 vmware-vmx 12937 root 6 -10 960m 719m 523m S 75 9.0 67219:49 vmware-vmx In bold are the cpu usage for my 4 virtuals guests These guests are running on a linux system, and the appropriate process are usually 5% - 15% of cpu I don't understang why , since a few days I have this big problem. This is the "top" on a virtual guest which is at 95% of cpu load top - 11:23:15 up 194 days, 23:13, 4 users, load average: 0.25, 0.47, 0.59 Tasks: 92 total, 2 running, 90 sleeping, 0 stopped, 0 zombie Cpu(s): 1.4%us, 7.7%sy, 0.0%ni, 90.5%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 382296k total, 369732k used, 12564k free, 145156k buffers Swap: 979924k total, 13956k used, 965968k free, 86988k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3691 root 20 0 23948 1148 960 S 13.0 0.3 15339:23 vmware-guestd 3840 root 20 0 19880 584 512 S 7.7 0.2 1729:17 hald-addon-stor This virtual guest state is ok ... If anyone has any ideas .. Thanks

  Read the article

• What I should know about memory management?

  - by bua

  first of all: I don't use stackadmin or similar so please don't vote for moving there, I'm reading man top and paper "what every programmer should know about memory ..." I need really simple explanation like for retard ;) Having following top dump: top - 11:21:19 up 37 days, 21:16, 4 users, load average: 0.41, 0.75, 1.09 Tasks: 313 total, 5 running, 308 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.6%sy, 0.9%ni, 96.2%id, 0.1%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 132103848k total, 131916948k used, 186900k free, 54000k buffers Swap: 73400944k total, 73070884k used, 330060k free, 13931192k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3305 tudb 25 10 144m 52m 940 R 6.0 0.0 1306:09 app 3011 tudb 15 0 71528 19m 604 S 3.3 0.0 171:57.83 app 3373 tudb 25 10 209m 93m 940 S 3.0 0.1 1074:53 app 3338 tudb 25 10 144m 47m 940 R 2.7 0.0 780:48.48 app 4227 tudb 25 10 208m 99m 904 S 1.3 0.1 198:56.01 app 8506 tudb 25 10 80.7g 49g 932 S 2.0 39.6 458:31.22 app I'm wondering what is: RES (my expl. physical memory consumption ? see 49GB) VIRT (memory mapped disk to cache? see 80GB) SHR (shared pages?) Swap: (is this cached label - for memory mapped disk into swap cache?) Should sum of RES give MEM: X used? or maybe sum of VIRT?

  Read the article

• Android emulator performance on linux

  - by Rado

  I installed the android SDK and eclipse plugin on my laptop, but I was surprised to find out that the emulator eats up 100% of one of my cpu cores. I have exactly the same setup on a desktop machine that does not have this issue. Both computers are running arch linux and both were updated yesterday. Granted, the desktop has better hardware than the laptop, but I was expecting to get closer to 50% cpu usage than 100% on the laptop. Both android virtual devices have the same specs: CPU: ARM Target: Android 2.3.3 - API Level 10 Skin: WVGA800 SD Card: 512M hw.lcd.density: 240 vm.heapSize: 24 hw.ramSize: 256 Laptop host has Intel Core 2 T7200 @ 2GHz cpu with 2Gb RAM. Desktop host has AMD Phenom II X4 940 @ 3GHz cpu with 8Gb RAM. The android emulator uses only 1 core and here are the CPU usage results: Laptop: Cpu0 : 22.8%us, 76.5%sy, 0.0%ni, 0.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu1 : 11.2%us, 2.4%sy, 0.0%ni, 86.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055484k total, 1860304k used, 195180k free, 5276k buffers Swap: 2000088k total, 106872k used, 1893216k free, 350780k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2026 xyz 20 0 396m 207m 7192 R 100 10.3 4:11.58 emulator-arm Desktop: Cpu0 : 0.7%us, 0.0%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 1.3%us, 0.0%sy, 0.0%ni, 98.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 5.0%us, 1.3%sy, 0.0%ni, 91.9%id, 1.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.3%us, 0.3%sy, 0.0%ni, 99.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7666324k total, 6506808k used, 1159516k free, 1650960k buffers Swap: 8988348k total, 0k used, 8988348k free, 2867300k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2811 xyz 20 0 392m 220m 6276 S 8 2.9 0:33.58 emulator-arm Is there any way I can improve the emulator performance on the laptop? [UPDATE] I ran the emulator with the same settings, on the same laptop under Win7 and after starting up, it didn't use 100% of a CPU core unlike under linux. Also, I tried running the emulator from a terminal in Linux and I get this message when I don't get it under the desktop Linux host: Could not configure '/dev/hpet' to have a 1024Hz timer. This is not a fatal error, but for better emulation accuracy type: 'echo 1024 /proc/sys/dev/hpet/max-user-freq' as root. I'm not really familiar with rtc or hpet, but it doesn't seem that max-user-freq setting does anything, I still get the same warning.

  Read the article

• load-causing processes disappearing from "top" ps -o pcpu shows bogus numbers

  - by Alec Matusis

  I administer a large number of servers, and I have this problem only with Ubuntu 10.04 LTS: I run a server under normal load (say load average 3.0 on an 8-core server). The "top" command shows processes taking certain % of CPU that cause this load average: say PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 11008 mysql 20 0 25.9g 22g 5496 S 67 76.0 643539:38 mysqld ps -o pcpu,pid -p11008 %CPU PID 53.1 11008 , everything is consistent. The all of the sudden, the process causing the load average disappears from "top", but the process continues to run normally (albeit with a slight performance decrease), and the system load average becomes somewhat higher. The output of ps -o pcpu becomes bogus: # ps -o pcpu,pid -p11008 %CPU PID 317910278 1587 This happened to at least 5 different severs (different brand new IBM System X hardware), each running different software: one httpd 2.2, one mysqld 5.1, and one Twisted Python TCP servers. Each time the kernel was between 2.6.32-32-server and 2.6.32-40-server. I updated some machines to 2.6.32-41-server, and it has not happened on those yet, but the bug is rare (once every 60 days or so). This is from an affected machine: top - 10:39:06 up 73 days, 17:57, 3 users, load average: 6.62, 5.60, 5.34 Tasks: 207 total, 2 running, 205 sleeping, 0 stopped, 0 zombie Cpu(s): 11.4%us, 18.0%sy, 0.0%ni, 66.3%id, 4.3%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 74341464k total, 71985004k used, 2356460k free, 236456k buffers Swap: 3906552k total, 328k used, 3906224k free, 24838212k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 805 root 20 0 0 0 0 S 3 0.0 1493:09 fct0-worker 982 root 20 0 0 0 0 S 1 0.0 111:35.05 fioa-data-groom 914 root 20 0 0 0 0 S 0 0.0 884:42.71 fct1-worker 1068 root 20 0 19364 1496 1060 R 0 0.0 0:00.02 top Nothing causing high load is showing on top, but I have two highly loaded mysqld instances on it, that suddenly show crazy %CPU: #ps -o pcpu,pid,cmd -p1587 %CPU PID CMD 317713124 1587 /nail/encap/mysql-5.1.60/libexec/mysqld and #ps -o pcpu,pid,cmd -p1624 %CPU PID CMD 2802 1624 /nail/encap/mysql-5.1.60/libexec/mysqld Here are the numbers from # cat /proc/1587/stat 1587 (mysqld) S 1212 1088 1088 0 -1 4202752 14307313 0 162 0 85773299069 4611685932654088833 0 0 20 0 52 0 3549 27255418880 5483524 18446744073709551615 4194304 11111617 140733749236976 140733749235984 8858659 0 552967 4102 26345 18446744073709551615 0 0 17 5 0 0 0 0 0 the 14th and 15th numbers according to man proc are supposed to be utime %lu Amount of time that this process has been scheduled in user mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). This includes guest time, guest_time (time spent running a virtual CPU, see below), so that applications that are not aware of the guest time field do not lose that time from their calculations. stime %lu Amount of time that this process has been scheduled in kernel mode, measured in clock ticks (divide by sysconf(_SC_CLK_TCK). On a normal server, these numbers are advancing, every time I check the /proc/PID/stat. On a buggy server, these numbers are stuck at a ridiculously high value like 4611685932654088833, and it's not changing. Has anyone encountered this bug?

  Read the article

• ~/.xsession-errors is 2.7gb big (and growing), on fresh install, caused by gnome-settings-daemon errors

  - by Alex Black

  I've just installed Ubuntu 10.10 x64, activated the recommended Nvidia drivers, and I noticed my hard disk space is disappearing, I narrowed the culprit down to this: alex@alex-home:~$ ls -la .x* -rw------- 1 alex alex 4436076400 2010-11-19 22:35 .xsession-errors -rw------- 1 alex alex 10495 2010-11-19 21:46 .xsession-errors.old Any idea what this file is, why its so big, and why its growing? A few seconds later: alex@alex-home:~$ ls -la .x* -rw------- 1 alex alex 5143604317 2010-11-19 22:36 .xsession-errors -rw------- 1 alex alex 10495 2010-11-19 21:46 .xsession-errors.old tailing it: alex@alex-home:~$ tail .xsession-errors (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed Also, the process "gnome-settings" seems to be using 100% cpu: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1514 alex 20 0 268m 10m 7044 R 100 0.1 7:06.10 gnome-settings-

  Read the article

• Games to Vista Game explorer with Inno Setup

  - by Kraemer

  Ok, i'm trying to force my inno setup installer to add a shortcut of my game to Vista Games Explorer. Theoretically this should do the trick: [Files] Source: "GameuxInstallHelper.dll"; DestDir: "{app}"; Flags: ignoreversion overwritereadonly; [Registry] Root: HKLM; Subkey: SOFTWARE\dir\dir; Flags: uninsdeletekeyifempty Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: Path; ValueType: String; ValueData: {app}; Flags: uninsdeletekey Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: AppFile; ValueType: String; ValueData:{app}\executable.exe ; Flags: uninsdeletekey [CustomMessages] en.Local=en en.removemsg=Do you wish to remove game saves and settings? en.taskentry=Play [Code] const PlayTask = 0; AllUsers = 2; Current = 3; type TGUID = record Data1: Cardinal; Data2, Data3: Word; Data4: array [0..7] of char; end; var GUID: TGUID; function GetDC(HWND: DWord): DWord; external '[email protected] stdcall'; function GetDeviceCaps(DC: DWord; Index: Integer): Integer; external '[email protected] stdcall'; function ReleaseDC(HWND: DWord;DC: DWord): Integer; external '[email protected] stdcall'; function ShowWindow(hWnd: DWord; nCmdShow: Integer): boolean; external '[email protected] stdcall'; function SetWindowLong(hWnd: DWord; nIndex: Integer; dwNewLong: Longint):Longint; external '[email protected] stdcall'; function GenerateGUID(var GUID: TGUID): Cardinal; external 'GenerateGUID@files:GameuxInstallHelper.dll stdcall setuponly'; function AddToGameExplorer(Binary: String; Path: String; InstallType: Integer; var GUID: TGUID): Cardinal; external 'AddToGameExplorerW@files:GameuxInstallHelper.dll stdcall setuponly'; function CreateTask(InstallType: Integer; var GUID: TGUID; TaskType: Integer; TaskNumber: Integer; TaskName: String; Binary: String; Parameters: String): Cardinal; external 'CreateTaskW@files:GameuxInstallHelper.dll stdcall setuponly'; function RetrieveGUIDForApplication(Binary: String; var GUID: TGUID): Cardinal; external 'RetrieveGUIDForApplicationW@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveFromGameExplorer(var GUID: TGUID): Cardinal; external 'RemoveFromGameExplorer@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveTasks(var GUID: TGUID): Cardinal; external 'RemoveTasks@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function InitializeSetup(): Boolean; var appath: string; ResultCode: Integer; begin if RegKeyExists(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir') then begin RegQueryStringValue(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir', 'Path', appath) Exec((appath +'\unins000.exe'), '', '', SW_SHOW, ewWaitUntilTerminated, ResultCode) end else begin Result := TRUE end; end; procedure CurUninstallStepChanged(CurUninstallStep: TUninstallStep); begin if CurUninstallStep = usUninstall then begin if GetWindowsVersion shr 24 > 5 then begin RetrieveGUIDForApplication(ExpandConstant('{app}\AWL_Release.dll'), GUID); RemoveFromGameExplorer(GUID); RemoveTasks(GUID); UnloadDll(ExpandConstant('{app}\GameuxInstallHelper.dll')); end; end; if CurUninstallStep = usPostUninstall then begin if MsgBox(ExpandConstant('{cm:removemsg}'), mbConfirmation, MB_YESNO)=IDYES then begin DelTree(ExpandConstant('{app}'), True, True, True); end; end; end; procedure CurStepChanged(CurStep: TSetupStep); begin if GetWindowsVersion shr 24 > 5 then begin if CurStep = ssInstall then GenerateGUID(GUID); if CurStep = ssPostInstall then begin AddToGameExplorer(ExpandConstant('{app}\AWL_Release.dll'), ExpandConstant('{app}'), Current, GUID); CreateTask(3, GUID, PlayTask, 0, ExpandConstant('{cm:taskentry}'), ExpandConstant('{app}\executable.exe'), ''); CreateTask(3, GUID, 1, 0, 'Game Website', 'http://www.gamewebsite.com/', ''); end; end; end; The installer works just fine, but it doesn't place a shortcut of my game to Games explorer. Since i believe that the problem is on the binary file i guess for that part i should ask for some help. So, can anyone please give me a hand here?

  Read the article

• apache eats up too much ram per child

  - by mrc4r7m4n

  Hello to everyone. I've got fallowing problem: Apache eat to many ram per child. The fallowing comments shows: cat /etc/redhat-release -- Fedora release 8 (Werewolf) free -m: total used free shared buffers cached Mem: 3566 3136 429 0 339 1907 -/+ buffers/cache: 889 2676 Swap: 4322 0 4322 I know that you will say that there is nothing to worry about because swap is not use, but i think it's not use for now. 3.httpd -v: Server version: Apache/2.2.14 (Unix) 4.httpd -l: Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_include.c mod_filter.c mod_log_config.c mod_env.c mod_setenvif.c mod_version.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c 5.List of loaded dynamic modules: LoadModule authz_host_module modules/mod_authz_host.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule cgi_module modules/mod_cgi.so 6.My prefrok directive <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On 7.top -u apache: ctrl+ M top - 09:19:42 up 2 days, 19 min, 2 users, load average: 0.85, 0.87, 0.80 Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie Cpu(s): 7.3%us, 15.7%sy, 0.0%ni, 75.7%id, 0.0%wa, 0.7%hi, 0.7%si, 0.0%st Mem: 3652120k total, 3149964k used, 502156k free, 348048k buffers Swap: 4425896k total, 0k used, 4425896k free, 1944952k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16956 apache 20 0 700m 135m 100m S 0.0 3.8 2:16.78 httpd 16953 apache 20 0 565m 130m 96m S 0.0 3.7 1:57.26 httpd 16957 apache 20 0 587m 129m 102m S 0.0 3.6 1:47.41 httpd 16955 apache 20 0 567m 126m 93m S 0.0 3.6 1:43.60 httpd 17494 apache 20 0 626m 125m 96m S 0.0 3.5 1:58.77 httpd 17515 apache 20 0 540m 120m 88m S 0.0 3.4 1:45.57 httpd 17516 apache 20 0 573m 120m 88m S 0.0 3.4 1:50.51 httpd 16954 apache 20 0 551m 120m 88m S 0.0 3.4 1:52.47 httpd 17493 apache 20 0 586m 120m 94m S 0.0 3.4 1:51.02 httpd 17279 apache 20 0 568m 117m 87m S 16.0 3.3 1:51.87 httpd 17302 apache 20 0 560m 116m 90m S 0.3 3.3 1:59.06 httpd 17495 apache 20 0 551m 116m 89m S 0.0 3.3 1:47.51 httpd 17277 apache 20 0 476m 114m 81m S 0.0 3.2 1:37.14 httpd 30097 apache 20 0 536m 113m 83m S 0.0 3.2 1:47.38 httpd 30112 apache 20 0 530m 112m 81m S 0.0 3.2 1:40.15 httpd 17513 apache 20 0 516m 112m 85m S 0.0 3.1 1:43.92 httpd 16958 apache 20 0 554m 111m 82m S 0.0 3.1 1:44.18 httpd 1617 apache 20 0 487m 111m 85m S 0.0 3.1 1:31.67 httpd 16952 apache 20 0 461m 107m 75m S 0.0 3.0 1:13.71 httpd 16951 apache 20 0 462m 103m 76m S 0.0 2.9 1:28.05 httpd 17278 apache 20 0 497m 103m 76m S 0.0 2.9 1:31.25 httpd 17403 apache 20 0 537m 102m 79m S 0.0 2.9 1:52.24 httpd 25081 apache 20 0 412m 101m 70m S 0.0 2.8 1:01.74 httpd I guess thats all information needed to help me solve this problem. I think the virt memory is to big, the same res. The consumption of ram is increasing all the time. Maybe it's memory leak because i see there is so many static modules compiled. Could someone help me with this issue? Thank you in advance. 8.ldd /usr/sbin/httpd linux-gate.so.1 => (0x0012d000) libm.so.6 => /lib/libm.so.6 (0x0012e000) libpcre.so.0 => /lib/libpcre.so.0 (0x00157000) libselinux.so.1 => /lib/libselinux.so.1 (0x0017f000) libaprutil-1.so.0 => /usr/lib/libaprutil-1.so.0 (0x0019a000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x001b4000) libldap-2.3.so.0 => /usr/lib/libldap-2.3.so.0 (0x001e6000) liblber-2.3.so.0 => /usr/lib/liblber-2.3.so.0 (0x00220000) libdb-4.6.so => /lib/libdb-4.6.so (0x0022e000) libexpat.so.1 => /lib/libexpat.so.1 (0x00370000) libapr-1.so.0 => /usr/lib/libapr-1.so.0 (0x00391000) libpthread.so.0 => /lib/libpthread.so.0 (0x003b9000) libdl.so.2 => /lib/libdl.so.2 (0x003d2000) libc.so.6 => /lib/libc.so.6 (0x003d7000) /lib/ld-linux.so.2 (0x00110000) libuuid.so.1 => /lib/libuuid.so.1 (0x00530000) libresolv.so.2 => /lib/libresolv.so.2 (0x00534000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00548000) libssl.so.6 => /lib/libssl.so.6 (0x00561000) libcrypto.so.6 => /lib/libcrypto.so.6 (0x005a6000) libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x006d9000) libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00707000) libcom_err.so.2 => /lib/libcom_err.so.2 (0x0079a000) libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x0079d000) libz.so.1 => /lib/libz.so.1 (0x007c3000) libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x007d6000) libkeyutils.so.1 => /lib/libkeyutils.so.1 (0x007df000) Currently i cant restart the apache. I work in a company and now there is rush hours. I will do that about 5 pm. Current top -u apache: shift + M top - 12:31:33 up 2 days, 3:30, 1 user, load average: 0.73, 0.80, 0.79 Tasks: 114 total, 1 running, 113 sleeping, 0 stopped, 0 zombie Cpu(s): 3.3%us, 4.7%sy, 0.0%ni, 90.0%id, 1.3%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3652120k total, 3169720k used, 482400k free, 353372k buffers Swap: 4425896k total, 0k used, 4425896k free, 1978688k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16957 apache 20 0 708m 145m 117m S 0.0 4.1 2:11.32 httpd 16956 apache 20 0 754m 142m 107m S 0.0 4.0 2:33.94 httpd 16955 apache 20 0 641m 136m 103m S 5.3 3.8 1:58.37 httpd 17515 apache 20 0 624m 131m 99m S 0.0 3.7 2:03.90 httpd 16954 apache 20 0 627m 130m 98m S 0.0 3.6 2:13.87 httpd 17302 apache 20 0 625m 124m 97m S 0.0 3.5 2:10.80 httpd 17403 apache 20 0 624m 114m 91m S 0.0 3.2 2:08.85 httpd 16952 apache 20 0 502m 114m 81m S 0.0 3.2 1:23.78 httpd 16186 apache 20 0 138m 61m 35m S 0.0 1.7 0:15.54 httpd 16169 apache 20 0 111m 49m 17m S 0.0 1.4 0:06.00 httpd 16190 apache 20 0 126m 48m 24m S 0.0 1.4 0:11.44 httpd 16191 apache 20 0 109m 48m 19m S 0.0 1.4 0:04.62 httpd 16163 apache 20 0 114m 48m 21m S 0.0 1.4 0:09.60 httpd 16183 apache 20 0 127m 48m 23m S 0.0 1.3 0:11.23 httpd 16189 apache 20 0 109m 47m 17m S 0.0 1.3 0:04.55 httpd 16201 apache 20 0 106m 47m 17m S 0.0 1.3 0:03.90 httpd 16193 apache 20 0 103m 46m 20m S 0.0 1.3 0:10.76 httpd 16188 apache 20 0 107m 45m 18m S 0.0 1.3 0:04.85 httpd 16168 apache 20 0 103m 44m 17m S 0.0 1.2 0:05.61 httpd 16187 apache 20 0 118m 41m 21m S 0.0 1.2 0:08.50 httpd 16184 apache 20 0 111m 41m 19m S 0.0 1.2 0:09.28 httpd 16206 apache 20 0 110m 41m 20m S 0.0 1.2 0:11.69 httpd 16199 apache 20 0 108m 40m 17m S 0.0 1.1 0:07.76 httpd 16166 apache 20 0 104m 37m 18m S 0.0 1.0 0:04.31 httpd 16185 apache 20 0 99.3m 36m 16m S 0.0 1.0 0:04.16 httpd as you can see the memory usage growing up from e.g. res( 135 to 145)m and it will be growing up till memory ends. Are you sure that this option i set up: <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On are correct? Maybe i should decrease some of them? Another questions that bother me: I got e.g. static module mod_negotiation.c compiled into apache and the same module loaded as dynamic. Is this normal that i've loaded duplicated module. But when i want to remove dynamic module(mod_negotiation.c) from httpd.conf and then restart apache error appears. Now I cant tell this error message because i cant restart apache :( Hello again:) This is memory usage just after restart apache: top - 16:19:12 up 2 days, 7:18, 3 users, load average: 1.08, 0.91, 0.91 Tasks: 109 total, 2 running, 107 sleeping, 0 stopped, 0 zombie Cpu(s): 17.0%us, 25.7%sy, 51.0%ni, 4.7%id, 0.0%wa, 0.3%hi, 1.3%si, 0.0%st Mem: 3652120k total, 2762516k used, 889604k free, 361552k buffers Swap: 4425896k total, 0k used, 4425896k free, 2020980k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13569 apache 20 0 93416 43m 15m S 0.0 1.2 0:02.55 httpd 13575 apache 20 0 98356 38m 16m S 32.3 1.1 0:02.55 httpd 13571 apache 20 0 86808 33m 12m S 0.0 0.9 0:02.60 httpd 13568 apache 20 0 86760 33m 12m S 0.0 0.9 0:00.81 httpd 13570 apache 20 0 83480 33m 12m S 0.0 0.9 0:00.51 httpd 13572 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13573 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13574 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13761 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13762 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13763 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.00 httpd I will try to compile apache from source to newest version. Thx for help guys.

  Read the article

• how to calculate bitwise OR using AND, XOR and shift?

  - by Flavius

  Hi The question seems pretty well formulated I have a virtual machine which implements only AND, XOR, SHL and SHR, yet I have to do a "OR 0x01" operation.

  Read the article

• How can a 1Gb Java heap on a 64bit machine use 3Gb of VIRT space?

  - by Graeme Moss

  I run the same process on a 32bit machine as on a 64bit machine with the same memory VM settings (-Xms1024m -Xmx1024m) and similar VM version (1.6.0_05 vs 1.6.0_16). However the virtual space used by the 64bit machine (as shown in top under "VIRT") is almost three times as big as that in 32bit! I know 64bit VMs will use a little more memory for the larger references, but how can it be three times as big? Am I reading VIRT in top incorrectly? Full data shown below, showing top and then the result of jmap -heap, first for 64bit, then for 32bit. Note the VIRT for 64bit is 3319m for 32bit is 1220m. * 64bit * PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22534 agent 20 0 3319m 163m 14m S 4.7 2.0 0:04.28 java $ jmap -heap 22534 Attaching to process ID 22534, please wait... Debugger attached successfully. Server compiler detected. JVM version is 10.0-b19 using thread-local object allocation. Parallel GC with 4 thread(s) Heap Configuration: MinHeapFreeRatio = 40 MaxHeapFreeRatio = 70 MaxHeapSize = 1073741824 (1024.0MB) NewSize = 2686976 (2.5625MB) MaxNewSize = -65536 (-0.0625MB) OldSize = 5439488 (5.1875MB) NewRatio = 2 SurvivorRatio = 8 PermSize = 21757952 (20.75MB) MaxPermSize = 88080384 (84.0MB) Heap Usage: PS Young Generation Eden Space: capacity = 268500992 (256.0625MB) used = 247066968 (235.62142181396484MB) free = 21434024 (20.441078186035156MB) 92.01715277089181% used From Space: capacity = 44695552 (42.625MB) used = 0 (0.0MB) free = 44695552 (42.625MB) 0.0% used To Space: capacity = 44695552 (42.625MB) used = 0 (0.0MB) free = 44695552 (42.625MB) 0.0% used PS Old Generation capacity = 715849728 (682.6875MB) used = 0 (0.0MB) free = 715849728 (682.6875MB) 0.0% used PS Perm Generation capacity = 21757952 (20.75MB) used = 16153928 (15.405586242675781MB) free = 5604024 (5.344413757324219MB) 74.24378912132907% used * 32bit * PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 30168 agent 20 0 1220m 175m 12m S 0.0 2.2 0:13.43 java $ jmap -heap 30168 Attaching to process ID 30168, please wait... Debugger attached successfully. Server compiler detected. JVM version is 14.2-b01 using thread-local object allocation. Parallel GC with 8 thread(s) Heap Configuration: MinHeapFreeRatio = 40 MaxHeapFreeRatio = 70 MaxHeapSize = 1073741824 (1024.0MB) NewSize = 1048576 (1.0MB) MaxNewSize = 4294901760 (4095.9375MB) OldSize = 4194304 (4.0MB) NewRatio = 8 SurvivorRatio = 8 PermSize = 16777216 (16.0MB) MaxPermSize = 67108864 (64.0MB) Heap Usage: PS Young Generation Eden Space: capacity = 89522176 (85.375MB) used = 80626352 (76.89128112792969MB) free = 8895824 (8.483718872070312MB) 90.0629940005033% used From Space: capacity = 14876672 (14.1875MB) used = 14876216 (14.187065124511719MB) free = 456 (4.3487548828125E-4MB) 99.99693479832048% used To Space: capacity = 14876672 (14.1875MB) used = 0 (0.0MB) free = 14876672 (14.1875MB) 0.0% used PS Old Generation capacity = 954466304 (910.25MB) used = 10598496 (10.107513427734375MB) free = 943867808 (900.1424865722656MB) 1.1104107034039412% used PS Perm Generation capacity = 16777216 (16.0MB) used = 11366448 (10.839889526367188MB) free = 5410768 (5.1601104736328125MB) 67.74930953979492% used

  Read the article

1 2 3 4 5 6  | Next Page >