Search Results

Search found 25629 results on 1026 pages for 'site maintenance'.

Page 1/1026 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Outside VPN traffic not able to ping site-to-site VPN remote site

  - by Siriss

  we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

  Read the article

• How do *you* track and document routine maintenance?

  - by Zak

  What software or system do you guys out on server fault use to remind you to do routine maintenance? How do you checklist and log the various items you are supposed to check? Do you have an internal process document? Do you have cron mail you every week with reminders to check system logs? Also, do you work on a team to do system maintenance, and if so, how do you coordinate who will do what maintenance? If you use a bug/issue tracking system to enter tasks, do you have a cron job enter recurring tasks?

  Read the article

• Route additional network through Sonicwall site-to-site VPN

  - by Brandon

  I have a sonicwall site to site vpn. At one of the sites there is another Cisco vpn to another site. I need to route the traffic for the cisco vpn through the site to site from the other sonicwall site. Site A - 10.10.0.0 /16 network Site B - 192.168.1.0 /24 Sonicwall, A cisco vpn is on 192.168.1.226 address and has routes the 10.10.0.0 network to Site A. Site C - 192.168.2.0 /24 Sonicwall Site A-B VPN is working Site B-C VPN is working I need to get Site C to transmit the 10.10.0.0 traffic over the VPN to site B and then out the Cisco device.

  Read the article

• How to Change and Manually Start and Stop Automatic Maintenance in Windows 8

  - by Lori Kaufman

  Windows 8 has a new feature that allows you to automatically run scheduled daily maintenance on your computer. These maintenance tasks run in the background and include security updating and scanning, Windows software updates, disk defragmentation, system diagnostics, among other tasks. We’ve previously shown you how to automate maintenance in Windows 7, Vista, and XP. Windows 8 maintenance is automatic by default and the performance and energy efficiency has been improved over Windows 7. The program for Windows 8 automatic maintenance is called MSchedExe.exe and it is located in the C:\Windows\System32 directory. We will show you how you can change the automatic maintenance settings in Windows 8 and how you can start and stop the maintenance manually. NOTE: It seems that you cannot turn off the automatic maintenance in Windows 8. You can only change the settings and start and stop it manually. Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked

  Read the article

• htaccess code for maintenance page redirect

  - by Force Flow

  I set up a maintenance page that I could enable through an htaccess file. The html file is located in a folder called "maintenance". The html file has some images in it. However, visitors to the page see no images, even though I added a line to allow them. If I try to visit an image in the browser directly, it redirects to the maintenance.htm page. Am I missing something? # Redirects visitors to maintenance page except for specific IP addresses # uncomment lines when redirecting visitors to maintenance page; comment when done. # Also see the section on "redirects visitors from maintenance page to homepage" # #RewriteCond %{REMOTE_ADDR} !^127.0.0.1$ #RewriteCond %{REMOTE_ADDR} !^111.111.111.111$ RewriteCond %{REQUEST_URI} !/maintenance/maintenance\.htm$ [NC] RewriteCond %{REQUEST_URI} !\.(jpg|jpeg|png|gif|css|ico)$ [NC] RewriteRule ^(.*)$ /maintenance/maintenance.htm [R=302,L] # # end redirects visitors to maintenance page # Redirects visitors from maintenance page to homepage # comment lines when redirecting visitors to maintenance page; uncomment when done # #Redirect 301 /maintenance/maintenance.htm / # # end redirects visitors from maintenance page to homepage

  Read the article

• Cant logon to domain over site-to-site vpn

  - by 3molo

  Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

  Read the article

• Site-to-site VPN using MD5 instead of SHA and getting regular disconnection

  - by Steven

  We are experiencing some strange behavior with a site-to-site IPsec VPN that goes down about every week for 30 minutes (Iam told 30 minutes exactly). I don't have access to the logs, so it's difficult to troubleshoot. What is also strange is that the two VPN devices are set to use SHA hash algorithm but apparently end up agreeing to use MD5. Does anybody have a clue? or is this just insufficient information?

  Read the article

• Route from Cisco ASA over site to site VPN

  - by Wookie321

  I want to be able to push f/w logging traffic to a server at a remote site. This server is accepting syslog traffic on port 514. In the ASA I've configured it to use this server as a syslog server. The Cisco f/w's inside interface address is 10.0.0.1 and I want to route over the link to an address of 192.168.1.1. The vpn is up and working between sites, and local clients at each site can access resources etc. How would I go about setting up the route from the f/w to this remote server only?

  Read the article

• L2TP server - site-to-site vpn connection

  - by Pyro

  I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we have a SonicWall firewall/router contraption in the home-office that is connected to a far-office over a VPN. Communications with machines in the home-office and far-office is fine. We also have an L2TP server running on the SonicWall that outside users can connect to. This gives them access to machines in the home-office. Communication between outside users and the home-office is fine. However outside users connected to the home-office via the L2TP server can't communicate with machines in the far-office. Will there need to be network bridging or routing needed? Or will this simply be a firewall setting to get this working? Thanks for any help or clues you provide! Rob

  Read the article

• Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

  - by steve_eyre

  We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Router for creating site to site VPN to server provider using Cisco ASA 5540

  - by fondie

  We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN Client Shrew Soft VPN Connect However, I'm looking to purchase a new load balancing router for our office and thought this could be an opportunity to get VPN client duties taken over by hardware. We could then create a permanent VPN tunnel that could be used by anyone on the network with no software client necessary. Sadly I'm not the most knowledgeable on this kind of stuff so is: 1) This a realizable goal? Next I need to know what kind of hardware I will need. I'm not looking to spend lots of money on this (~$500), so doubtful I can afford any Cisco kit. Therefore, this is the most promising candidate I've seen (as far as my limited knowledge goes): Draytek Vigor 2955 - http://www.draytek.co.uk/products/vigor2955.html 2) Would this be compatible with the Cisco kit my server provider uses? 3) If not, are there any alternatives I should consider? Many thanks in advance.

  Read the article

• looking for a clean way of how to bring down a ftp server for maintenance

  - by harald

  hello, i'm currently thinking of a clean way of how to bring an ftp server down for maintenance. i wonder, if anybody out there could give me some hints of how to solve this: i don't want to interrupt any current uploads, but want to block any new connects / uploads and wait, till uploads have finished, before taking down the ftp server is there a way of dynamically prevent user-logins and show a message eg.: "ftp currently down for maintenance" when a user tries to log in? are my thoughts on this very uncommon or how do others handle this -- i feel, that just halting ftp server and killing any current uploads is not the right way for this ... i use proftpd (with SQL backend) btw, maybe there are some specific solutions for this -- or are there any generic tools to achieve this? many thanks!

  Read the article

• How to host a site in another site - with little or no coding

  - by tunmise fasipe

  SUMMARY: All of these happens on Site A User visits site A User enter username and password User click on Login Button User authenticated on Site B behind the scene User is shown a page on Site A that contains his/her profile from Site B as layout/styled from Site B User can click links in the Profile page that links to other area in Site B Meaning: Session has to be maintained somehow I have web application where I store users' password and username. If you logon to this site, you can login with the password and username to have access to your profile. There is another option that requires you to login to my site from your site and have your profile displayed within your site. This is because you might already have a site that your clients know you with. This link is close to what I want to do: http://aspmessageboard.com/showthread.php?t=235069 A user on Site A login to Site B and have the information on site B showing in site A. He should not know whether Site B exists. It should be as if everything is happening in Site A This latter part is what I don't know to implement. I have these ideas: Have a fixed IFrame within your site to contain my site: but I am concerned about size/layout since different clients have different layout/size for their content section. I am thinking of how to maintain session too A webservice: I don't know how feasible this is since the Password and ID are on my server. You may have to send them back and forth. It means client would have to code with my API. But I am not just returning data, I have to show them a page that contains the profile details OpenID, Single-SignOn: Just guessing - but the authentication and data resides on my server. there is nothing to access on your side in this case Examples: like login into facebook within my site and still be able to do post updates, receive notifications Facebook implement some of these with IFrame e.g. the Like button *NOTE: * I have tested the IFrame option. It worked but I still have to remove my site specific content like my page Banner, Side Navigation etc. I was able to login normally as if I was actually on the site. This show my GUI but - style sheet was missing - content not styled with CSS - Any relative url won't work. It would look for that resource relative to the current server. Unless I change links to absolute - Clicking on the LogIn button produces this error: The state information is invalid for this page and might be corrupted. UPDATE: I was reading about REST webservice few days ago and I got this idea: What about the idea of returning an XML from a webservice [REST or SOAP] and providing an XSLT (that I can provide) to display it. Thus they won't have to do much coding?

  Read the article

• Becoming a "maintenance developer"

  - by anon

  So I've kind of been getting angry about the current position I'm in, and I'd love to get other developers' input on this. I've been at my current place of employment for about 11 months now. When I began, I was working on all new features. I basically worked on an entire new web project for the first 5-6 months I was here. After this, I was moved to more of a service oriented role (which was still great, all new stuff for me), and I was in this role for about the past 5-6 months. Here's where the problem comes in. Basically, a couple of days ago I was made the support/maintenance guy. Now, we have an IT support team, so I'm not talking that kind of support, I'm talking more of a second level support guy (when the guys on the surface can't really get to the root of the issue), coupled with working on maintenance issues that have been lingering in the backlog for a while. To me, a developer with about 3 years of experience, this is kind of disheartening. With the type of work place this is, I wouldn't be surprised if these support issues take up most of my days, and I barely make it to working on maintenance issues. Also, most of these support issues aren't even related to code, they are more or less just knowing the system architecture, working with making sure services are running/getting started properly, handling/fixing bad data, etc. I'm a developer, so this part sucks. Also, even when I do have time to work maintenance, these are basically just bug fixes/improving bad code, so this sucks as well, however at least it's related to coding. Am I wrong for getting angry here? I don't want to really complain about it, but to be honest, I wasn't spoken to about this or anything, I was kind of just sent an e-mail letting me know I'm the guy for this type of thing, and that was that. The entire team took a few minutes to give me their "that sucks" talk, because they know how annoying it is to be on support for the type of work we do, so I know I'm not the only guy that knows it's not that great of an opportunity. I'm just kind of on the fence about how to move forward. Obviously I'm just going to continue working for the time being, no point making a bad impression on anybody, but I'd like to know how you guys would approach this situation, or how you think I should be feeling about it/how you guys would feel. Thanks guys.

  Read the article

• WSS 3.0 Backup/Restore Root Site Collection to Sub-Site of New Site Collection

  - by bfrancis

  Our intranet was originally setup to be at the root of its site collection. We are trying to change this so that our new internet site will live in the root and the intranet will be a sub-site. At this point I have created a new web application and site collection to house the internet and intranet. I used the 'stsadm -o backup' command to create a backup of our current intranet. I then ran the 'stsadm -o restore' command to restore the intranet site collection to wss/sites/intranet. This seems to have worked as I am able to access the intranet from this location. The issue I now seem to have is that images, sub-sites, etc. are all making reference as if the intranet is still the root site. So for example a link to a sub-site is pointing to wss/department/technology/default.aspx and it needs to point to wss/sites/intranet/department/technology/default.aspx. I am looking for help and/or clarification on two things: 1. Am I approaching the migration of a root site collection to a sub-site the best way? 2. How would I go about updating the link references so that they are based on the intranet now being a sub-site instead of the root site?

  Read the article

• LDoms and Maintenance Mode

  - by Owen Allen

   I got a few questions about how maintenance mode works with LDoms. "I have a Control Domain that I need to do maintenance on. What does being put in maintenance mode actually do for a Control Domain?" Maintenance mode is what you use when you're going to be shutting a system down, or otherwise tinkering with it, and you don't want Ops Center to generate incidents and notification of incidents. Maintenance mode stops new incidents from being generated, but it doesn't stop polling, or monitoring, the system and it doesn't prevent alerts. "What does maintenance mode do with the guests on a Control Domain?" If you have auto recovery set and the Control Domain is a member of a server pool of eligible systems, putting the Control Domain in maintenance mode automatically migrates guests to an available Control Domain.  When a Control Domain is in maintenance mode, it is not eligible to receive guests and the placement policies for guest creation and for automatic recovery won't select this server as a possible destination. If there isn't a server pool or there aren't any eligible systems in the pool, the guests are shut down. You can select a logical domain from the Assets section to view the Dashboard for the virtual machine and the Automatic Recovery status, either Enabled or Disabled. To change the status, click the action in the Actions pane. "If I have to do maintenance on a system and I do not want to initiate auto-recovery, what do I have to do so that I can manually bring down the Control Domain (and all its Guest domains)?" Use the Disable Automatic Recovery action. "If I put a Control Domain into maintenance mode, does that also put the OS into maintenance mode?" No, just the Control Domain server. You have to put the OS into maintenance mode separately. "Also, is there an easy way to see what assets are in maintenance mode? Can we put assets into, or take them out of, maintenance mode on some sort of group level?" You can create a user-defined group that will automatically include assets in maintenance mode. The docs here explain how to set up these groups. You'll use a group rule that looks like this:

  Read the article

• How to set only specific nginx server block into maintenance mode programmatically

  - by Ville Mattila

  I am looking for a solution to automate one of our application's deployment process. In the beginning of deployment, I would like to programmatically set the specified server into maintenance mode and finally after the deployment has been completed, remove the maintenance mode flag from the nginx server. By maintenance mode, I mean that nginx should response with HTTP Response Code 503 to all the requests (with possible custom page). I know how to set the server block to respond with 503 code (see http://www.cyberciti.biz/faq/custom-nginx-maintenance-page-with-http503/) but the question is about how to do this programmatically and most efficiently. Two options have came to my mind: Option 1: At the beginning of the deployment process, write a maintenance file into document root and conditionally check an existence of the maintenance file in nginx server config: server { if (-f $document_root/in_maintenance_mode) { return 503; } } This method contains certain overhead as the file existence is checked for each request. Is it possible to check the file existence only when loading the nginx config? Option 2: Deployment script replaces the whole nginx server configuration file with a maintenance version and swaps it back in the end of the deployment. If this method is used, I am concerned about possible other automation processes like puppet that may be override the maintenance configuration file.

  Read the article

• Best Practice for Software Maintenance Console

  - by Ben-G

  I am looking for a list of must-have maintenance/administration features/components/services for enterprise applications. I know following common components: Configuration Cockpit (shows current configuration mistakes/issues) Load-Analysis (shows the current load on different system components) Vitality measures Log File Access System Restart Capability Backup/Restore Capability Are there any widely accepted services/features which are included in any software with a focus on reliablity and maintainability?

  Read the article

• October Update to Rules-Driven Maintenance

  - by merrillaldrich

  Happy Fall! It’s a beautiful October here in Minneapolis / Saint Paul. In preparation for my home town SQL Saturday this weekend, as well as the PASS Summit, I offer an update to the Rules-Driven Maintenance code I originally published back in August 2012 . It’s hard to believe this thing is now more than two years old – it’s been an incredible help as the number of databases and instance my team manages has grown. One enhancement with this update is the ability to set overrides for both Index and...(read more)

  Read the article

• Are SharePoint site templates really less performant than site definitions?

  - by Jim

  So, it seems in the SharePoint blogosphere that everybody just copies and pastes the same bullet points from other blogs. One bullet point I've seen is that SharePoint site templates are less performant than site definitions because site definitions are stored on the file system. Is that true? It seems odd that site templates would be less performant. It's my understanding that all site content lives in a database, whether you use a site template or a site definition. A site template is applied once to the database, and from then on the site should not care if the content was created using a site template or not. So, does anybody have an architectural reason why a site template would be less performant than a site definition? Edit: Links to the blogs that say there is a performance difference: From MSDN: Because it is slow to store templates in and retrieve them from the database, site templates can result in slower performance. From DevX: However, user templates in SharePoint can lead to performance problems and may not be the best approach if you're trying to create a set of reusable templates for an entire organization. From IT Footprint: Because it is slow to store templates in and retrieve them from the database, site templates can result in slower performance. Templates in the database are compiled and executed every time a page is rendered. From Branding SharePoint:Custom site definitions hold the following advantages over custom templates: Data is stored directly on the Web servers, so performance is typically better. At a minimum, I think the above articles are incomplete, and I think several are misleading based on what I know of SharePoints architecture. I read another blog post that argued against the performance differences, but I can't find the link.

  Read the article

• Ubuntu boots up maintenance shell?

  - by Andrew

  Any time I try to start up my computer it goes to a screen titled GNU GRUB version 1.99-12ubuntu5 I can then choose from 5 different options. If I try to just boot Ubuntu, with Linux 3.0.0-20-generic it then goes to a screen saying: mountall: /lib/x86_64-linux-gnu/libc.so.6: version 'GLIBC_2.14' not found (required by /lib/libply.so.2) General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and reboot the system. root@Brown126:~# Control-D just brings me back to the first screen. And nothing works in recovery mode. How can I fix this?

  Read the article

• Cost of maintenance depending on paradigms

  - by Anto

  Is there any data on which paradigms allow for code which is easier/cheaper to maintain? Certainly, independantly of the chosen paradigm, good design is cheaper to maintain than bad, but there should probably be major differences coming only from the paradigm choice. Unstructured programming, for instance, generates very messy code (spaghetti code) which is expensive to maintain. In object oriented programming, implementation details are hidden and thus it should be pretty cheap to change those. In functional programming, there are no side effects, thus there is lesser risk of introducing bugs during maintainance, which should be cheaper. Is there any data on which paradigms are the most cost-efficient when coming down to maintenance? If no such data exists, what is your take on the question?

  Read the article

• ClearOS - how to create a site to site VPN between two ClearOS boxes?

  - by Scott Szretter

  I plan on setting up some ClearOS boxes at several sites, and would like to set up site-to-site VPN between the remote sites and a main site (all running ClearOS enterprise 5.2sp1 / latest version). I have found references for how to set up ClearOS to VPN in to devices such as cisco for IPSEC, and others with PPTP. But for these methods it did not mention how you might configure 2 ClearOS boxes to talk to each other ipsec or pptp. I also saw documentation on installing OpenVPN and using the OpenVPN client software to VPN in to the ClearOS box. I will probably use this for individual users to VPN in, but I have some small sites ( 1 to 10 users) that will have their own ClearOS box and need to create a site to site VPN link back to the main site's OpenVPN box. Is this possible, can you point me to docs, or other info or basically, how? A couple updates: I did find a thread that asks the same basic question, where the user has a vpn set up between the two clearos machines (after installing ipsec vpn modules), just not transporting traffic between the LANS - and the very last post claims you have to edit some files (/etc/ipsec.conf) and set leftnexthop rightnexthop values to %direct. After that, it's supposed to work. Could it be that simple? I also posted to clear foundation, and they pointed me to some documentation for setting up ipsec unmanaged vpn. This looks pretty good, but, I will most likely need to figure out how to handle a dynamic dns type setup at least on one end. Also, what does it mean by multi-wan? Finally, what happens when a vpn connection goes down exactly - someone has to reboot the box or ?

  Read the article

• I have a very long and repetitive python path, where do I look to correct this?

  - by ninja123

  I know it is probably not necessary to paste the whole path, but just for the record I have done so below. Whenever I run a python command, it takes a long time to load this path I suppose. I have checked in .bash_profile and only have these two lines: export PATH=/Users/username/bin:/opt/local/Library/Frameworks/Python.framework/Versions/2.5/bin:/opt/local/bin:/opt/local/sbin:/opt/local/apache2/bin:$PATH export PYTHONPATH=/opt/local/lib/python2.5/site-packages/ And my python path as outputed by Django's debug is: Python path : ['/Users/username/Sites/videocluster/eggs/ipython-0.10-py2.5.egg', '/Users/username/Sites/videocluster/eggs/South-0.6.1-py2.5.egg', '/Users/username/Sites/videocluster/eggs/django_markitup-0.5.2-py2.5.egg', '/Users/username/Sites/videocluster/eggs/DateTime-2.12.0-py2.5.egg', '/Users/username/Sites/videocluster/eggs/Markdown-2.0.3-py2.5.egg', '/Users/username/Sites/videocluster/eggs/PIL-1.1.7-py2.5-macosx-10.5-i386.egg', '/Users/username/Sites/videocluster/eggs/djangorecipe-0.20-py2.5.egg', '/Users/username/Sites/videocluster/eggs/zc.recipe.egg-1.2.3b2-py2.5.egg', '/Users/username/Sites/videocluster/eggs/zc.buildout-1.5.0b2-py2.5.egg', '/Users/username/Sites/videocluster/eggs/pytz-2010h-py2.5.egg', '/Users/username/Sites/videocluster/eggs/zope.interface-3.6.1-py2.5-macosx-10.5-i386.egg', '/Users/username/Sites/videocluster/eggs/setuptools-0.6c11-py2.5.egg', '/Users/username/Sites/videocluster/parts/django', '/Users/username/Sites/videocluster', '/Users/username/Sites/videocluster/bin', '/opt/local/lib/python2.5/site-packages/setuptools_git-0.3.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pysqlite-2.5.5-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/CouchDB-0.5-py2.5.egg', '/opt/local/lib/python2.5/site-packages/httplib2-0.4.0-py2.5.egg', '/opt/local/lib/python2.5/site-packages/PyYAML-3.08-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/simple_db_migrate-1.2.8-py2.5.egg', '/opt/local/lib/python2.5/site-packages/PyDispatcher-2.0.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pyOpenSSL-0.9-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/greenlet-0.2-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/Supay-0.0.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/configobj-4.6.0-py2.5.egg', '/opt/local/lib/python2.5/site-packages/Fabric-0.9b1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/fudge-0.9.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pydelicious-0.5.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/feedparser-4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/github_cli-0.2.5.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/simplejson-2.0.9-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', ......(repeating)....... '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/harobed.paster_template.advanced_package-0.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/squash-0.5.0dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/eventlet-0.8.13-py2.5.egg', '/opt/local/lib/python2.5/site-packages/FeinCMS-1.0.2-py2.5.egg', '/opt/local/lib/python2.5/site-packages/pyenchant-1.5.3-py2.5.egg', '/opt/local/lib/python2.5/site-packages/guppy-0.1.9-py2.5-macosx-10.5-i386.egg', '/opt/local/lib/python2.5/site-packages/django_scraper-0.1dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/Pympler-0.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/fabric.contrib.packagemanager-0.1dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/selenium-1.0.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/Scrapy-0.9_dev-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', ......(repeating)....... '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/zc.buildout-1.4.1-py2.5.egg', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '/opt/local/lib/python2.5/site-packages', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python25.zip', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-darwin', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/plat-mac/lib-scriptpackages', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-tk', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/lib-dynload', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/Numeric', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/PIL', '/opt/local/lib/python2.5/site-packages/PIL', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', ......(repeating)....... '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/lib/python2.5/site-packages/gtk-2.0', '/opt/local/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/gtk-2.0'] Someone, please tell me where I can go to correct this. Thanks

  Read the article

• GIS-based data visualization and maintenance tool

  - by Dave Jarvis

  Background Looking to leverage an existing GIS system for exploring organizational data. Architecture The following figure represents a high-level overview of the system's desired features: The most basic usage would be as follows: The user visits a web site. The system presents a map (having regions, cities, and buildings). The user drills-down on the map to a particular building. The system provides a basic CRUD interface. The user can view and modify information about personnel (e.g., their assigned teams), equipment (e.g., network appliances), applications, and the building itself (e.g., contact and phone numbers). Ideally, all the components should be open-source (or otherwise free). Problem This must be a small project that needs a quick (but functional) prototype, mostly to confirm whether or not such a system would be useful in the long term. Questions What software components would you use to quickly develop a working prototype? What open-source solutions already exist, if any? Ideas Here is what I am thinking: PostGIS - Define the regions, cities, and sites Google Maps - Display an interactive, clickable map geoJSON - Protocol between PostGIS and Google Maps Seam - CRUD interface Custom Development For example, this would entail: Installation and configuration Configure SSH for remote logins Subversion (or git) PostgreSQL PostGIS Java Tomcat Seam JasperReports Enter GIS information into PostGIS Aggregate data sources into PostgreSQL database Develop starting page for map interface Develop clickable Google Maps interface Develop summary reports Develop CRUD interface using Seam for data maintenance Surely something like this already exists? Thank you!

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >