Search Results

Search found 18 results on 1 pages for 'solaris11'.

Page 1/1 | 1 

  • Setup Guide for updating local system and the repository with the incremental Solaris 11.1 SRU

    - by Gurubalan
    This guide covers the steps to implement the following setup. I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5II. Setting up local system as an IPS Repository Server (HTTP interface)III. Updating the local repository with the incremental Solaris 11.1 SRU 16.5I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5We assume that the local system is currently installed with Solaris 11.1 GA and the system doesn't have internet connectivity.What I have:1. Two parts of full repo iso files downloaded from http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html. Both files are concatenated to a single file using the following command. $ cat sol-11_1-repo-full.iso-a sol-11_1-repo-full.iso-b > sol-11_1-repo-full.iso I suggest to verify the downloaded file against its md5checksum value [http://download.oracle.com/otn/solaris/11_1/md5sum.txt] using the following command digest -a md5 <file-name>  // the output of this command should match the original checksum value for that file.2. Incremental repo sol-11_1_16_5_0-incr-repo.iso downloaded from MOS [Patch 18269379: ORACLE SOLARIS 11.1.16.5.0 REPO ISO IMAGE (SPARC/X86 (64-BIT)]. You can get the checksum value of incremental repo iso by clicking the check box "show digest details" when you download the file.3. The local system IP is 192.168.10.10 & port 81 is reserved for repo serverPlease note that this repo file (either full or incremental) is common for both SPARC and X86(64BIT).Steps to update the local system: 1. #mounting s11.1 full repo iso to mnt        $ mount -F hsfs /soft/sol-11_1-repo-full.iso /mnt 2. Setting the pkg publisher to full repo source         $ pkg set-publisher -g file:///mnt/repo solaris 3. Perform the update of the packages.        $ pkg updateII. Setting up local system (Oracle Solaris 11.1) as an IPS Repository Server(HTTP interface):Please note that we have already mounted the full repo iso at /mnt    1. # copying /mnt permanently to the disk location at /s11.1        #zfs create -o atime=off -o mountpoint=/s11.1 rpool/s11.1        #rsync -aP /mnt/* /s11.1     2. #unmounting mnt         #umount /mnt3. To allow clients to access the local repository via HTTP, enable the application/pkg/server Service Management Facility (SMF) service.        svccfg -s application/pkg/server setprop pkg/inst_root=<data_source>/repo        eg: $svccfg -s application/pkg/server setprop pkg/inst_root=/s11.1/repo4. Setting port# to 81      svccfg -s application/pkg/server setprop pkg/port=<port_number>      eg: svccfg -s application/pkg/server setprop pkg/port="81"5a. Enable the pkg/server service (if the service is disabled)     $svcs pkg/server     STATE          STIME    FMRI     disabled        19:55:03 svc:/application/pkg/server:default      $svcadm enable pkg/server5b. Refresh/Restart the service, if it is already online       $svcadm refresh application/pkg/server       $svcadm restart application/pkg/server6. Setting pkg publisher on repo server and repo clients:      pkg set-publisher -G '*' -g http://<ip>:<port> solaris      eg: $pkg set-publisher -G '*' -g 'http://192.168.10.10:81' solaris7. Verify the Solaris 11.1 version from the repository         $pkgrepo list -s http://192.168.10.10:81 | grep entire         solaris   entire     0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z You will have multiple row entries if the repository is setup with incremental SRUs.III. Updating the local repository with the incremental Solaris 11.1 SRU 16.51. #mounting s11.1 incremental SRU repo iso to mnt        $ mount -F hsfs <full_path_to>/sol-11_1_sruN_bldnum_respinnum-incr-repo.iso  /mnt        $ mount -F hsfs /soft/sol-11_1_16_5_0-incr-repo.iso /mnt2. Updating the local repository        $pkgrecv -s  /mnt/repo -d /s11.1/repo '*'3. Building a Search Index    $pkgrepo -s /s11.1/repo refresh     Initiating repository refresh.4. Refresh/Restart the service       $svcadm refresh svc:/application/pkg/server       $svcadm restart svc:/application/pkg/server5. Verify the repo has the incremental SRU as well.       # pkgrepo list -s http://192.168.10.10:81 | grep entire        solaris   entire      0.5.11,5.11-0.175.1.16.0.5.0:20140218T165248Z       solaris   entire      0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z

    Read the article

  • Solaris 11 pkg fix is my new friend

    - by user12611829
    While putting together some examples of the Solaris 11 Automated Installer (AI), I managed to really mess up my system, to the point where AI was completely unusable. This was my fault as a combination of unfortunate incidents left some remnants that were causing problems, so I tried to clean things up. Unsuccessfully. Perhaps that was a bad idea (OK, it was a terrible idea), but this is Solaris 11 and there are a few more tricks in the sysadmin toolbox. Here's what I did. # rm -rf /install/* # rm -rf /var/ai # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 So far so good. Then comes an oops..... setup-service[168]: cd: /var/ai//service/.conf-templ: [No such file or directory] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made). Let's give it a try. # pkg fix installadm Verifying: pkg://solaris/install/installadm ERROR dir: var/ai Group: 'root (0)' should be 'sys (3)' dir: var/ai/ai-webserver Missing: directory does not exist dir: var/ai/ai-webserver/compatibility-configuration Missing: directory does not exist dir: var/ai/ai-webserver/conf.d Missing: directory does not exist dir: var/ai/image-server Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/cgi-bin Missing: directory does not exist dir: var/ai/image-server/images Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/logs Missing: directory does not exist dir: var/ai/profile Missing: directory does not exist dir: var/ai/service Group: 'root (0)' should be 'sys (3)' dir: var/ai/service/.conf-templ Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_data Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_files Missing: directory does not exist file: var/ai/ai-webserver/ai-httpd-templ.conf Missing: regular file does not exist file: var/ai/service/.conf-templ/AI.db Missing: regular file does not exist file: var/ai/image-server/cgi-bin/cgi_get_manifest.py Missing: regular file does not exist Created ZFS snapshot: 2012-12-11-21:09:53 Repairing: pkg://solaris/install/installadm Creating Plan (Evaluating mediators): | DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 3/3 0.0/0.0 0B/s PHASE ITEMS Updating modified actions 16/16 Updating image state Done Creating fast lookup database Done In just a few moments, IPS found the missing files and incorrect ownerships/permissions. Instead of reinstalling the system, or falling back to an earlier Live Upgrade boot environment, I was able to create my AI services and now all is well. # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 Refreshing install services Warning: mDNS registry of service solaris11-x86 could not be verified. Creating default-i386 alias Setting the default PXE bootfile(s) in the local DHCP configuration to: bios clients (arch 00:00): default-i386/boot/grub/pxegrub Refreshing install services Warning: mDNS registry of service default-i386 could not be verified. # installadm create-service -n solaris11u1-x86 --imagepath /install/solaris11u1-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 514/514 292.3/292.3 0B/s PHASE ITEMS Installing new actions 661/661 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11u1-x86 Image path: /install/solaris11u1-x86 Refreshing install services Warning: mDNS registry of service solaris11u1-x86 could not be verified. # installadm list Service Name Alias Of Status Arch Image Path ------------ -------- ------ ---- ---------- default-i386 solaris11-x86 on i386 /install/solaris11-x86 solaris11-x86 - on i386 /install/solaris11-x86 solaris11u1-x86 - on i386 /install/solaris11u1-x86 This is way way better than pkgchk -f in Solaris 10. I'm really beginning to like this new IPS packaging system.

    Read the article

  • DNS client configuration steps in Oracle Solaris 11

    - by Gurubalan
    This guide covers Quick how to configure DNS client on Solaris 11. DNS client configuration in Solaris 11 is based on SMF service rather than file based. When you configure a system as DNS client, you will be performing the following two configurations. I. DNS client setup II. Configure Name service switch to use DNS I. DNS client setup 1. Configure using SMF service network/dns/client # svccfg -s network/dns/clientsvc:/network/dns/client> setprop config/search = astring: ("test.com" "service.test.com")svc:/network/dns/client> setprop config/nameserver = net_address: (192.168.10.10 192.168.10.11)svc:/network/dns/client> exit 2.  Enable the DNS client service (when you configure it for the first time) #svccfg enable -r dns/client 3. Restart/Refresh DNS client service (It is done when there is any update to the configuration) #svccfg refresh dns/client #svccfg restart dns/client 4. Verify /etc/resolv.conf if it is updated with the changes. # more /etc/resolv.conf ## _AUTOGENERATED_FROM_SMF_V1_## WARNING: THIS FILE GENERATED FROM SMF DATA.#   DO NOT EDIT THIS FILE.  EDITS WILL BE LOST.# See resolv.conf(4) for details.search               test.com service.test.comnameserver      192.168.10.10nameserver      192.168.10.11 --- II.  Configuring Name service switch to use DNS 1. Configure using SMF service  system/name-service/switch # svccfg -s system/name-service/switchsvc:/system/name-service/switch> setprop config/host = astring: "files dns"svc:/system/name-service/switch>exit 2.  Restart/Refresh name-service/switch service #svccfg refresh name-service/switch #svccfg restart  name-service/switch 3. Verfiy host entry in /etc/nsswitch.conf  is updated with dns. # more /etc/nsswitch.conf## _AUTOGENERATED_FROM_SMF_V1_## WARNING: THIS FILE GENERATED FROM SMF DATA.#   DO NOT EDIT THIS FILE.  EDITS WILL BE LOST.# See nsswitch.conf(4) for details.passwd: filesgroup:  fileshosts:  files dnsipnodes:        files dns . --- PS: Thank you ollasi for your motivation behind the screen.

    Read the article

  • port redirection on solaris 11

    - by mo3lyana
    I'm trying port forwarding on solaris 11. I have a mechine behind a server that use solaris 11. I try to access that mechine from the external port, and forwarded by solaris 11 mechine to that machine using the ip filter. I give ipnat.conf configuration like this: rdr net0 0.0.0.0/0 port 1428 -> 10.1.18.178 port 22 but the response appeared when I tried to remote is connection time out, but if I redirect to a solaris 11 machine itself, the configuration is running well. I've enabled IP forwarding on the system root@solaris11:/etc/ipf# ndd -get /dev/ip ip_forwarding 1 root@solaris11:/etc/ipf# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing enabled enabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled root@solaris11:/etc/ipf# ipadm show-prop PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE ipv4 forwarding rw on on off on,off is there any configuration that I missed?

    Read the article

  • Solaris OS?????????? (??????·SIer????!??????)

    - by OTN-J Master
    Solaris11???????????????2011?11??????OS????????11.1??????????2012?11???????????????OTN?Solaris11?????????????????????????????????????OTN?????????????????????????????????????????????????????????????????????IT?????????Solaris??????????????????????????????????????????Solaris???????Solaris 11?????????5???????????Solaris 11??????????????????????????????????????????????????????????????????????????????????????????????????????????????????OS????????????????????????????????????????????????OS???????????????Sun???????Solaris???????????????????????Solaris????????????????SPARC?????????????????????????????????????????????Solaris??????????????????????????????????????????Solaris???????????????????????????Oracle Database?????????????Oracle Database??????????????????????????????????????????????????????????????DB???????????Solaris??????????????????????????????????????(Solaris11.1??????????????????)???????????????????????????????????????????? ??????????????OS???????????????????? Solaris ?????????????????????????????? ?????????????????????????????????????????? Solaris????????????????????????? ???Solaris????????????Solaris???????????????????? ???????OS??????????????Solaris???????????????????1???????????????????10??????????????????????????????????????????????(??????????????????????????????????)Oracle Solaris 11: ????????·????????????????????????????·???????Oracle Solaris 11?????·?????????????????????????????????????Oracle Solaris 11????????????IT??????????????????????????????????????????????????????????????????????????????Solaris??????????????Solaris 11????????????????????????????????????Solaris 11????????????Oracle Solaris 11 ??????·????????10???????????????????????????????????????????????OTN???????????????Solaris 11?????????????????????????????????????????????????????(??????"????”??!)IBM AIX?Oracle Solaris???????·?????·???HP-UX/Oracle Solaris???????????HP-UX?Oracle Solaris 11????HP-UX ?? Oracle Solaris ???????Red Hat Enterprise Linux?Oracle Solaris 11???Red Hat Enterprise Linux??Oracle Solaris??????? ??????????????????????Oracle Solaris????????????????Solaris????????????????????????????????????????????????????????????????????”?????????????????”?????????????????????????????????????????????????????????????Solaris 11.1??? ???????????????????????????????????Solaris 11???????????????????????????????????????Solaris 11.1?????????????????????????????????????????????????·?????????x86??SPARC?????????????????x86?????????????????????????Solaris 11??????????????????????????????????????OTN?????????????????????????????????????????????????????????????????????DVD??????????????????????????????????????????????????????????(??????????????) ?????????11?14?(?)?????????????????????Oracle DBA & Developer Day??????????????Oracle Solaris?Oracle Hardware???????????????????Oracle Solaris 11????????????????Solaris 11???????????????????????????11?14?(?)?? 15:50-16:50 ?? 17:00-18:00??????????: ?????Oracle Solaris 11!Solaris???????????????????????100?????????????????????Solaris Zones?DTrace?ZFS????????????Solaris 11?100?????????????????>> ????????????

    Read the article

  • ??????????????!?Oracle Solaris 11.1 Day? ??????????

    - by OTN-J Master
    ????????????Oracle Solaris??20???????????? ?????????????????Oracle Solaris 11.1????????11????300???????????????????????????OS???????Oracle Database????????????????OS????????????????>> ???????? ?Oracle Solaris 11:??????OS? ???????11?30?(?)????????????Oracle Solaris 11.1 Day???????????????????????????????????????????????????????????????????????!???Solaris???????????????????????????????????Web??????????????????????????????????????????????????????Solaris 11??????????????????????????????????????????????????????????????????>>??????!????: 11?30?(?)13:00~15:30 (????12:30)?????: ???????? 13F???????(??????)???????  “The First Cloud OS” ???????Oracle Solaris 11??????????????????????????????????????????? IT ????????????????????????????????????????????????IT???????OS????????????????????Oracle OpenWorld 2012?????????Solaris11?????????????????????Solaris 11.1 ???????????????????Solaris????????????????????OS??Oracle?????????????????????????????????????Oracle Solaris????????????????????? ?????? ?13:30~13:40? ???????????????????????!???????????????????OS????????????????????? ???????????????? ?? ?? ? ????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????IT????????????????????????????????????????????????????????????????????????????????????IT???????Enterprise??????????????????????? ?13:40~14:20?[??????????????]Oracle Solaris11.1 ?????????????????? ????????????? ??? ?“The First Cloud OS” ???????Oracle Solaris 11??????????????????????????????????????????? IT ??????????????????????????????????????????????????Oracle OpenWorld 2012?????????Solaris11?????????????????????Solaris 11.1 ???????????????? ?14:30~15:00?[?????????????????] ??????!Solaris 11 Beta ????????????????????   ???????   ? ?? ? ????????Oralce Solaris 11 Beta ?????????????????????????????????????????????15:00~15:20?[????????????????]Solaris 11 ?????????????????????? ??????????? ???????  ?? ?? Oracle University ?????????????????????????????????????????????????(Classroom Training)?????????????????????????????????????????????????????????Oracle University?????Solaris 11????????????????????? >> ??????????

    Read the article

  • Summary of the Solaris 11 webcast's livechat QnA session

    - by Karoly Vegh
    This is a followup post to the previous summary on the "What's new with Solaris 11 since the launch" webcast. That webcast has had a chatroom for a live Questions and Answers session running. I went through the archive of those and compiled a list of some of the (IMHO) most relevant and most frequently asked questions, I'd like to share. This is the first part, covering the QnA of Session I and II of the webcast, in a followup post we can have a look of the rest of the sessions if required - let me know in the comments. Also, should you have questions, as usual, feel free to ask those there, too.  ...and here come the answered questions:  When will Exadata be based on Solaris in place of Oracle Enterprise Linux?Exadata offers both Solaris 11 or Oracle Enterprise Linux.  The choice can be made at deployment time based on your OS needs.What are all other benefits and futures avilable in solaris 11 (cloud O.S.) compared to cloud based Red Hat Linux and Windows?suggest you check out our cloud white paper for a view of this. Also the OTN Solaris 11 page has some good articles. Here are the links:  http://www.oracle.com/technetwork/server-storage/solaris11/documentation/o11-106-sol11-cloud-501066.pdf http://www.oracle.com/technetwork/server-storage/solaris11/overview/index.htmlWill 11.1 have a more complete IPS respository for Oracle and FOSS software?Yes, we are adding additional packages to the various package repositories. Since Solaris 11 was launched, both the Oracle Solaris Studio tools as well as Oracle Solaris Cluster have been made available along with numerous new FOSS packages. We will continue to be adding additional Oracle products and open source packages in the future. Will Exadata be based on Sparc in place of intel-amd x86 in next future ?We can't publically discuss futures, but we actually have a SPARC version of Exadata today, it's called SuperCluster, this is such a powerfull multipurpose system that it actually have multiple personalities built into one system: Exadata, Exalogic, and it can be a general purpose platform if you want. Have I understood this right? Livepatching KSplice-style is coming to Solaris 11 too?We're looking at that for certain types of Solaris patches in the future.Will there be a security framework like SST/JASS for Solaris 11?We can't talk about the future projects on a public forum, but we recognize the need for SST/JASS and want to address this as soon as possible. On the other side there are a whole bunch of "best practices" that are now embedded into Solaris 11 by default, so out of the box Solaris 11 should already address part of what SST/JASS gave you. (For example we did a lot of work on improving the auditing performance so that we can now have it turned on by default). On x86 can install VirtualBox in a Zone and use that to host other OSes.Yes, this was one of the first things we made sure would work when we acquired VirtualBox when we were still Sun Microsystems. If I have a Solaris 11 Control Domain on a T-series, can I run a Solaris 10 Ldom with Solaris 8 branded containers?Yes, you can.Is Oracle Solaris free or do we need to purchase?Solaris is free, the entitlement to run it comes either with a Sun system (new or historical) or for 3rd party systems the entitlement comes with a support contract. Note that for production use you will be expected to get a support contract. If you don't want to use the Solaris system (Sun or 3rd party) for production use (i.e. development) you can get an OTN license on the Oracle Technical Network website. Will encryption and deduplication both work on a share?This should work at the same time. What approaches does Solaris use to monitor usage?There are many different tools in Solaris to monitor usage. The main ones are the "stats" (vmstat, mpstat, prstat, ...), the kstat interface, and DTrace (to get details you couldn't see before). And then there are layered tools that can interface with these tools (Ops Center, BMC, CA, Tivoli, ...) Apart little-endian, big-endian how is it easy to port Solaris applications on Sparc to x86 and vice-versa ?Very easy. Except for certain hardware specific applications (those that utilize hardware specific drivers), all of the same Oracle Solaris APIs exist for all architectures. Is IPS based patching aware of the fact that zones can reside on ZFS and move from one physical server to another ?IPS is definitely aware of zones and uses ZFS to support boot environments for non-global zones in the same way that's used for the global zone. With respect to moving a zone from one physical server to another, Solaris 11 supports to the same zone attach/deattach method that was introduced in Solaris 10. Is vnic support in Ldoms planned?This is currently being investigated for a future LDOM release. Is it possible with the new patching system to build a system later with the same patch level as a system built a few months earlier?Yes, you can choose/define exactly which version should go to the system and it will always put the same bits in place. The technical answer is that you choose the version of the "entire" package you want on the system and the rest flows from there. Is it in the plans to allow zones to add/remove zpools to running zones dynamically in future updates?Work in this area is currently under investigation. Any plans to realese Solaris 11 source code? i.e. opensolaris?We currently can't comment on publicly releasing the source code. If you need/want this access please let your Oracle account team know. What about VirtualBox and Solaris11 for virtualization?Solaris 11 works great with VirtualBox, as both a client and a host system. Will Oracle DB software eventually be supplied as IPS packages? When?We don't have a date yet but this is actively being worked on. What are the new artifacts in Oracle Solaris 11 than the previous versions?There are quite a few actually. The best start is to look at our "Evaluate Solaris 11" page, and there you also can find a Transition Guide. http://www.oracle.com/technetwork/server-storage/solaris11/overview/evaluate-1530234.html So, this seems just like RedHat's YUM environment?IPS offers certain features beyond those in YUM or other packaging systems. For example, IPS works with ZFS and Solaris Boot Environments to provide a safe environment for software lifecycle management so that changes can be reverted by switching to an older boot environment. With Zones on solaris 11, can I do paravirtualitation?The great thing about zones is you don't *need* paravirtualization. You're making the same direct kernel calls that you would outside of a zone.  It's an incredibly significant performance win over hypervisor-based virtualization. Are zones/containers officially supported to run Oracle Databases?  EBIZ?Hi Calvin, the answer is yes, here is the support matrix for DB:  http://www.oracle.com/technetwork/database/virtualizationmatrix-172995.html I've found some nasty bugs in Solaris 11 (one of which today) that have been fixed in community forks (i.e., Illumos). Will Oracle ever restart collaboration with the community?We continue to work with the community, just not as open on all projects as we did before (For example IPS is an open project) and the source of more than half of the Solaris packages is posted on our opensource websites. I can't comment on what we will do in the future. And with regards to bugs please file them through the support organization and we will get them resolved. Is zpool vdev removal on-the fly now possible ?This issue is actively being investigated although we don't have a date for when this feature will be available. Is pgstat now the official replacement for corestat ?It's intended to provide similar functionality Where are the opensource website?For Oracle Solaris, visit http://www.oracle.com/technetwork/opensource/systems-solaris-1562786.html As a cloud-scale virtualization, is it going to be easier to move zones between machines? maybe even automatic in case of a hardware failure?Hi Gashaw, we already have customers that have implemented what they refer to as "flying zones" that they can move around very easily. They use Solaris Cluster to do this. What about VMware vMotion like feature?We have secure live migration with both Logical Domains on SPARC T series systems, and with Oracle VM on x86 systems. When running Solaris 10/11 on an enterprise server with a lot of zones, what are best practises commands to show the system is running fine? (has enough hardware resources). For example CPU / Memory / I/O / system load. What are the recommended values?For Solaris 11, look into the new zonestat(1M) command that provides a great deal of information about zone utilization. In addition, there is new work underway in providing additional observability in areas such as per-zone file system I/O. Java optimizations done with Solaris 11? For X86 platforms too? Where can I find more detail about this?There is lots of work that go into optimizing Java for Oracle Solaris 10 & 11 on both SPARC and x86. See http://www.oracle.com/technetwork/articles/servers-storage-dev/solarisforjavadevelop-168642.pdf What is meant by "ZFS Shadow Migration"?It's a way to migrate data from another file system to ZFS: http://docs.oracle.com/cd/E23824_01/html/E24456/filesystem-3.html Is flash archive available with S11?Flash archive is not.  There is a procedure for disaster recovery, and we're working on a modern archive-based deployment tool for a future update.  The disaster recovery tool is here: http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-091-sol-dis-recovery-489183.html  You can also use Distribution Constructor to build common golden images. Will solaris 11 be available on the ODA soon?The idea's under evaluation -- we'll share your interest with the team. What steps can be taken to ensure that breaches of security are identified quickly?There are a number of tools, including the "bart" tool and "pkg verify" to ensure that software has not been compromised.  Solaris Audit can also be used to detect unauthorized access.  You can also use Immutable Zones to protect against compromise.  There are a wide variety of security tools, and I've covered only a few. What is the relation from solaris to java 7 speed optimization?There is constant work done between the Oracle Solaris and Java teams on performance optimizations. See http://docs.oracle.com/javase/7/docs/technotes/guides/vm/performance-enhancements-7.html for examples. What is the difference in the Solaris 11 installation compared to solaris 10 ? where i can find the document describing basic repository concepts ?The best place to start is: http://www.oracle.com/technetwork/server-storage/solaris11/index.html Hope you found the post useful. For questions, input, requests for the second half of the QnA, please find the comment section below.  -- charlie  

    Read the article

  • LDOMs in Solaris 11 don't work

    - by Giovanni
    I just got a new Sun Fire T2000, installed Solaris 11 and was going to configure LDOMs. However "ldmd" can't be started and in turn ldm doesn't work. root@solaris11:~# ldm Failed to connect to logical domain manager: Connection refused root@solaris11:~# svcadm enable svc:/ldoms/ldmd:default root@solaris11:~# tail /var/svc/log/ldoms-ldmd\:default.log [ May 28 12:56:22 Enabled. ] [ May 28 12:56:22 Executing start method ("/opt/SUNWldm/bin/ldmd_start"). ] Disabling service because this domain is not a control domain [ May 28 12:56:22 Method "start" exited with status 0. ] [ May 28 12:56:22 Stopping because service disabled. ] [ May 28 12:56:22 Executing stop method (:kill). ] Why is this not a control domain? There is no other domain on the box (as far as I can tell). I have upgraded the firmware to the latest 6.7.12, booted with reset_nvram, nothing helped ... sc> showhost Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03 Host flash versions: OBP 4.30.4.d 2011/07/06 14:29 Hypervisor 1.7.3.c 2010/07/09 15:14 POST 4.30.4.b 2010/07/09 14:24 What else should I do? Thanks!

    Read the article

  • ???????/???Oracle Solaris 11?????????????????

    - by user788995
    ????? ??:2012/05/14 ??:??????/?? Oracle Solaris 11 ?????????????????????????????????????? IPS????????????Solaris11??????Oracle Solaris ZonesVirtualBox in Solaris 11ZonesAppndix /Oracle Solaris 10?Oracle Solaris 11 ??? ????????? ????????????????? http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/D3-03.wmv http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/mp4/D3-03.mp4 http://www.oracle.com/technetwork/jp/ondemand/os-vm/d3-03-dl-1626604-ja.pdf

    Read the article

  • The Growing Importance of Network Virtualization

    - by user12608550
    The Growing Importance of Network Virtualization We often focus on server virtualization when we discuss cloud computing, but just as often we neglect to consider some of the critical implications of that technology. The ability to create virtual environments (or VEs [1]) means that we can create, destroy, activate and deactivate, and more importantly, MOVE them around within the cloud infrastructure. This elasticity and mobility has profound implications for how network services are defined, managed, and used to provide cloud services. It's not just servers that benefit from virtualization, it's the network as well. Network virtualization is becoming a hot topic, and not just for discussion but for companies like Oracle and others who have recently acquired net virtualization companies [2,3]. But even before this topic became so prominent, Solaris engineers were working on technologies in Solaris 11 to virtualize network services, known as Project Crossbow [4]. And why is network virtualization so important? Because old assumptions about network devices, topology, and management must be re-examined in light of the self-service, elasticity, and resource sharing requirements of cloud computing infrastructures. Static, hierarchical network designs, and inter-system traffic flows, need to be reconsidered and quite likely re-architected to take advantage of new features like virtual NICs and switches, bandwidth control, load balancing, and traffic isolation. For example, traditional multi-tier Web services (Web server, App server, DB server) that share net traffic over Ethernet wires can now be virtualized and hosted on shared-resource systems that communicate within a larger server at system bus speeds, increasing performance and reducing wired network traffic. And virtualized traffic flows can be monitored and adjusted as needed to optimize network performance for dynamically changing cloud workloads. Additionally, as VEs come and go and move around in the cloud, static network configuration methods cannot easily accommodate the routing and addressing flexibility that VE mobility implies; virtualizing the network itself is a requirement. Oracle Solaris 11 [5] includes key network virtualization technologies needed to implement cloud computing infrastructures. It includes features for the creation and management of virtual NICs and switches, and for the allocation and control of the traffic flows among VEs [6]. Additionally it allows for both sharing and dedication of hardware components to network tasks, such as allocating specific CPUs and vNICs to VEs, and even protocol-specific management of traffic. So, have a look at your current network topology and management practices in view of evolving cloud computing technologies. And don't simply duplicate the physical architecture of servers and connections in a virtualized environment…rethink the traffic flows among VEs and how they can be optimized using Oracle Solaris 11 and other Oracle products and services. [1] I use the term "virtual environment" or VE here instead of the more commonly used "virtual machine" or VM, because not all virtualized operating system environments are full OS kernels under the control of a hypervisor…in other words, not all VEs are VMs. In particular, VEs include Oracle Solaris zones, as well as SPARC VMs (previously called LDoms), and x86-based Solaris and Linux VMs running under hypervisors such as OEL, Xen, KVM, or VMware. [2] Oracle follows VMware into network virtualization space with Xsigo purchase; http://www.mercurynews.com/business/ci_21191001/oracle-follows-vmware-into-network-virtualization-space-xsigo [3] Oracle Buys Xsigo; http://www.oracle.com/us/corporate/press/1721421 [4] Oracle Solaris 11 Networking Virtualization Technology, http://www.oracle.com/technetwork/server-storage/solaris11/technologies/networkvirtualization-312278.html [5] Oracle Solaris 11; http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html [6] For example, the Solaris 11 'dladm' command can be used to limit the bandwidth of a virtual NIC, as follows: dladm create-vnic -l net0 -p maxbw=100M vnic0

    Read the article

  • Oracle Solaris 11 Webinare für Entwickler und Admins

    - by Detlef Drewanz
    Am 27. März beginnt eine Webinar Reihe für Solaris Entwickler und Administratoren, die sich mit dem Rollout von Anwendungen in Oracle Solaris 11 beschäftigt. Im 14-tägigen Rhythmus geht es um das Image Packaging System (IPS), Bootenvironments, Zonen, SMF und vielem anderen mehr. Software Engineers geben ihre Erfahrungen hier weiter. Das ist eine gute Gelegenheit, sich weiter in die Details von Oracle Solaris 11 einzuarbeiten. Details zur Anmeldung sind unter http://www.oracle.com/technetwork/server-storage/solaris11/overview/webinar-series-1563626.html nachzulesen.

    Read the article

  • Solaris Administration Web GUI?

    - by Robert C
    I recently installed Solaris 11 x86 text install (http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html?ssSourceSiteId=ocomen) to be used as a file server running ZFS. I noticed that I'm given the bare minimum in terms of packages. Is there an official oracle web GUI for managing ZFS? I ran a netstat and it doesn't appear to have installed any webserver thats listening. I saw something from a couple years ago, but apparently it's not packaged or maintained anymore (https://blogs.oracle.com/talley/entry/manage_zfs_from_your_browser). I tried pkg install network-console, but it says that the package isn't available for my platform. Any ideas? I'd like to stick with Oracle Solaris instead of the open source alternatives, if possible.

    Read the article

  • Wolkig und heiter

    - by A&C Redaktion
    Mit Solaris 11 bringt Oracle das erste Betriebssystem für die Cloud auf den Markt. Wir hatten es angekündigt, das Thema Cloud wird uns hier im Blog so schnell nicht loslassen: Am Freitag hat nun Oracle sein erstes Unix-Betriebssystem auf den Markt gebracht, das explizit für die Cloud designt wurde: Solaris 11 heißt es und hier ist die Assoziation zu Stanislaw Lems gleichnamigem Science Fiction-Roman durchaus angebracht: Schließlich gilt Cloud Computing als die Technologie der Zukunft schlechthin. Was bietet Solaris 11, welchen Nutzen können die Oracle Partner daraus ziehen? "Kunden können ihre Betriebsabläufe vereinfachen, die Kapazitäten ihrer Rechenzentren erhöhen und Unternehmensanwendungen von Oracle und anderen in einer sicheren, skalierbaren Cloud oder in einer klassischen Unternehmensumgebung laufen lassen“, fasst John Fowler, Executive Vice President, Systems zusammen. Darf‘s auch etwas konkreter sein? Bitte: Oracle Solaris 11 dient ganz einfach dazu, selbst anspruchsvollste Unternehmensanwendungen in privaten, hybriden und Public Clouds zu betreiben. Als vollständig virtualisiertes Betriebssystem verfügt es über integrierte Virtualisierungs-Funktionen, sowohl für Betriebssystem- als auch für Netzwerk- und Speicher-Ressourcen. Die Server-Virtualisierung sorgt für sichere Live-Migration und flexible Einsatzmöglichkeiten – basierend auf Oracle VM für x86- und SPARC-Systeme. Höchste Verfügbarkeit wird erreicht, indem Solaris 11 ein umfassendes Management über die gesamte Infrastruktur hinweg ermöglicht. Oracle Solaris 11 bietet bereits im Standardbetrieb aktive Sicherheit „by default“, wie rollenbasierten Root-Zugriff und Überwachungsfunktionen. Die Daten- und Speichermanagement-Basis für Oracle Solaris 11 ist Oracle Solaris ZFS. Neben garantierter Datenintegrität erlaubt das Tiered Storage das Einrichten von Pools mit Flash-Speicher und zudem Hochgeschwindigkeitsverschlüsselung. Ein Blick in die Presse zeigt, dass Solaris 11 durchaus für Aufsehen in der Fachwelt sorgt, so äußert sich etwa die Netzwelt sehr positiv: „Die neue Paketverwaltung IPS trägt wie die genannten Neuerungen dazu bei, dass Solaris es in Version 11 durchaus wieder mit den etablierten Linux-Distributionen aufnehmen kann. Das Betriebssystem macht nicht nur im Server-, sondern auch im Desktop-Einsatz eine sehr gute Figur und glänzt mit hoher Stabilität.“ Hier die direkten Links zu weiteren Berichten über Solaris11 in der Fachpresse: Heise onlineZDNetGolem.deSilicon.deAll about SECURITYIT DirectorPro-Linux.deTech ChannelLinux Magazin

    Read the article

  • ????”DDD”???!???????···OTN????????????

    - by OTN-J Master
    ???????????????????????Oracle DBA & Developer Day (??”DDD”)???????????:11?14?(?)13:30~18:00??:???????????(?????????????4????JR??????????????)???????????????????????????????????????????????????????????????????????????????????????????????????????????>> ???????????????????Oracle Database????????????????????????????????????????????????????(???????????????????????????????????????????????????) ~?????????????????~    ?A-1?????·???????! SQL?????????????????????    ?A-2?????·???????! SQL??????????    ?B-3?????·???????! ????????????????????    ?A-4??????! ????·??????????????????? ???OTN?????????????(!?)?????????????????????????(????????????????????????????????????!) ¦?Oracle Database 12c??????????? ?F-1~4?13:30~18:00 ????????????????Oracle Database 12c?????????????????????????????????????Oracle Database 12c????????????????????12c????????????????????Oracle MASTER for 12c?????????????????????????????????????????????!    ?F-1??????????????????????!Oracle Database 12c?ILM???    ?F-2?Oracle Database 12c?????????????    ?F-3?Oracle Database 12c??????????    ?F-4????????·??????? ???????? ¦ ?Oracle Database - ??????????????? ?? ?C-2? 14:40-15:40???????·????????????????????????????????????????/???????Oracle Database?????Data Protection????????????????????????????????????????? ????OTN?????”?????????????!DBA???”??????????????????????????????????????????????????????!????···(??????????????!!)???????????????????~???????????????~??????????????????????????????????????????????????????????????????????????????“?????”?????(??? ???)??????????????????????????????11?14?(?)??????Oracle DBA & Developer Day 2013?????Oracle Database????????????????????????????????????????????????????????????????¦ ?Oracle Fusion Middleware ????????? ???? ?? ?D-2? 14:40-15:40Java Flight Recorder - “Project HotRockit”HotSpot JVM??????????? “Project HotRockit” ????????????????????????Java Flight Recorder??????????Java?????????????????(???????)????????????JVM??????????????????????????? Java Mission Control?????????? Java Flight Recorder?Java Mission Control??JDK 7 Update 40 (7u40)???????????????????????????????????????????Java??????????????????????Java SE Advanced(????)??????????????????Java SE?????(??:BCL)???????????????????????????????????????????????????????????????????????????????????????OTN????Java Mission Control??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Java Mission Control ??? Java Flight Recorder: ?????????????????????Java???????(PDF)¦?Oracle Solaris?Oracle Hardware?????????????? ???E-3/E-4? ?? 15:50-16:50 ?? 17:00-18:00 ??????????: ?????Oracle Solaris 11!????????????Solaris???????????????????????100???????????????Solaris 11?Solaris Zones?DTrace?ZFS????????????Solaris 11?100?????????????????????????????????????? ?? ? DDD????????????????????????????????Solaris11 ??????????????????????(?????????????!)?????????????Solaris?????????????????????????????????Solaris??????????????????Solaris 11??????????????????????????????????!????:???????????????????????????????????????100??????????????????????????????????????????????????????????????!!>> ????????????

    Read the article

  • Solaris 11 Live CD alapú telepítés

    - by AndrasF
    Az elozo részben megigért két telepítési eljárás helyett kénytelen vagyok ebben a bejegyzésben kizárólag a Live CD-s változattal foglalkozni. Korábban nem gondoltam, hogy ennek bemutatása is több, mint 50 képernyo kimenetet igényel, ezért változtatnom kellett a korábbi tervezeten. A Solaris 11 Live CD-s telepítés elsosorban az asztali (desktop) felhasználók igényeit veszi figyelembe és kizárólag x86-os architektúrájú gépeken támogatott (annak ellenére, hogy SPARC-os rendszerek is rendelkeznek grafikus kártyával - pl. T4-1).A folyamat két részre bontható: eloször a vendéggép kerül kialakítása VirtualBox környezetben, majd ezt követi a Solaris 11-es telepítése virtuális gépre. HCL és segédprogramok (DDT, DDU) Mielott telepíteni szeretnénk a Solaris operációs rendszert, célszeru tájékozódni fizikai rendszerünk támogatottságáról. Erre jól használható a már említett hardver kompatibilitási (HCL) lista, vagy az alábbi két segédprogram: Device Detection Tool Device Driver Utility Mindkét alkalmazás képes rendszerünk hardver komponenseit feltérképezni és ellenorizni azok meghajtóprogram (driver) ellátottságát. Eltérés köztük abban nyilvánul meg, hogy míg a DDT futtatásához Java szükséges, addig a DDU Solarist igényel. Ez utóbbiról a telepítés során röviden szó fog esni. Telepíto készletek letöltési helye Hálózati installációtól eltekintve (*) telepítokészletre van szükségünk, mely az alábbi oldalról töltheto le. Célszeru letöltenünk mindhárom állományt és a csomagokat tartalmazó ún. repository médiát (a következo felsorolás utolsó eleme) is: sol-11-1111-live-x86.iso sol-11-1111-text-x86.iso sol-11-1111-ai-x86.iso sol-11-1111-repo-full.iso Az elso három változat indítható USB formátumban is rendelkezésre áll - ekkor iso végzodés helyett usb található a fájlnevek végén. Rövid utalást az egyes készletek feladatáról az elozo blog bejegyzés tartalmaz (link). Amennyiben SPARC architektúrájú rendszerre szeretnénk a telepítést végezni, 'x86' helyett a 'sparc' szöveget tartalmazó állományokra lesz szükség. (*) - arra is lehetoség van, hogy AI készletrol történo indítás segítségével végezzük a hálózaton keresztül történo telepítést. Ez akkor fontos, ha célgépünkön nincs PXE (Preboot Execution Environment) boot támogatás. VirtualBox konfigurálás Külön fizikai eszköz felhasználása nélkül virtuális környezetben is használható a Solaris 11, mint vendéggép. A VirtualBox használatával erre kényelmes lehetoség kínálkozik. Gazdagépünknek (Windows, Unix, Linux) megfelelo telepíto program, vagy programcsomag (jelenleg a 4.1.16-os verzió a legfrissebb változat) és az installációt is taglaló felhasználói kézikönyv letöltheto a termék oldaláról. A sikeres telepítést követoen az alábbi lépések során jutunk el az új virtuális gép kialakulásáig: 1. A VBox indítása után a központi ablak megmutatja a már létezo virtuális gépeinket (Sol11demo, Sol11u1b07, Sol11.1B16, Sun_ZFS_Storage_7000) és az aktuálisan kiválasztott egyed (Sol11demo) fobb jellemzoit (megnevezés, memória mérete, virtuális tároló eszközök listája...stb.) 2. A New gombra kattintva elindul a virtuális gépet létrehozó segéd (wizard) 3. Ezt követoen nevet kell adnunk a vendéggépnek és ki kell választanunk az operációs rendszer típusát (beszédes név használata esetén a VirtualBox képes az operációs rendszer családját kiválasztani, nekünk pusztán csak verziót kell beállítanunk): adjuk meg Solaris11-et névként és válasszuk a 64bites változatot (feltéve, hogy gazdagépünk támogatja ezt) 4. Telepítéshez és a kezdeti lépések megtételéhez 1536MB memória tökéletesen megfelel (ez késobb módosítható az elvárások függvényében) 5. Fizikai társaihoz hasonlóan, egyetlen virtuális gép sem létezhet merevlemez (jelen esetben virtuális diszk) nélkül. Használhatunk egy már létezo területet (virtuális lemezt tartalmazó állomány), de létrehozhatunk egy nekünk tetszo új példányt is. Maradjunk ez utóbbinál (Create new hard disk)! 6. A lehetséges formátumok közül - az egyszeruség okán - éljünk a felkínált alaptípussal (VDI - VirtualBox Disk Image). 7. Létrehozás során a virtuális lemez készülhet egyidejuleg (Fixed size), vagy több lépésben dinamikusan (Dynamically allocated). Az elso változat sokkal kevésbé terheli a rendszert, a második elonye pedig a helytakarékosság. Válasszuk a fix méretu változatot. 8. Most már csak egyetlen adat ismeretlen a VirtualBox számára, mégpedig a létrehozásra kerülo virtuális lemez nagysága. 8GB-os terület jelen esetben alkalmas az ismerkedés elkezdéséhez. 9. Amennyiben minden beállítást helyesen adtunk meg, a Create gomb megnyomása után elindul a virtuális lemez létrehozása. 10. Ez a muvelet a megadott adatoktól függoen néhány perc alatt befejezodik. 11. Hasonló megerosítés (Create gomb aktiválása) után elkezdodik a kért virtuális gép létrehozása is. 12. Sikeres végrehajtás után az új vitruális gép közvetlenül megjelenik a központi ablak baloldali listáján a rendelkezésre álló virtuális gépek közt. A blog bejegyzés folyamatosan frissül...a rész fennmaradó tartalma hamarosan felkerül az oldalra.

    Read the article

  • Quadratic Programming with Oracle R Enterprise

    - by Jeff Taylor-Oracle
         I wanted to use quadprog with ORE on a server running Oracle Solaris 11.2 on a Oracle SPARC T-4 server For background, see: Oracle SPARC T4-2 http://docs.oracle.com/cd/E23075_01/ Oracle Solaris 11.2 http://www.oracle.com/technetwork/server-storage/solaris11/overview/index.html quadprog: Functions to solve Quadratic Programming Problems http://cran.r-project.org/web/packages/quadprog/index.html Oracle R Enterprise 1.4 ("ORE") 1.4 http://www.oracle.com/technetwork/database/options/advanced-analytics/r-enterprise/ore-downloads-1502823.html Problem: path to Solaris Studio doesn't match my installation: $ ORE CMD INSTALL quadprog_1.5-5.tar.gz * installing to library \u2018/u01/app/oracle/product/12.1.0/dbhome_1/R/library\u2019 * installing *source* package \u2018quadprog\u2019 ... ** package \u2018quadprog\u2019 successfully unpacked and MD5 sums checked ** libs /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64   -PIC  -g  -c aind.f -o aind.o bash: /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95: No such file or directory *** Error code 1 make: Fatal error: Command failed for target `aind.o' ERROR: compilation failed for package \u2018quadprog\u2019 * removing \u2018/u01/app/oracle/product/12.1.0/dbhome_1/R/library/quadprog\u2019 $ ls -l /opt/solarisstudio12.3/bin/f95 lrwxrwxrwx   1 root     root          15 Aug 19 17:36 /opt/solarisstudio12.3/bin/f95 -> ../prod/bin/f90 Solution: a symbolic link: $ sudo mkdir -p /opt/SunProd/studio12u3 $ sudo ln -s /opt/solarisstudio12.3 /opt/SunProd/studio12u3/ Now, it is all good: $ ORE CMD INSTALL quadprog_1.5-5.tar.gz * installing to library \u2018/u01/app/oracle/product/12.1.0/dbhome_1/R/library\u2019 * installing *source* package \u2018quadprog\u2019 ... ** package \u2018quadprog\u2019 successfully unpacked and MD5 sums checked ** libs /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64   -PIC  -g  -c aind.f -o aind.o /opt/SunProd/studio12u3/solarisstudio12.3/bin/ cc -xc99 -m64 -I/usr/lib/64/R/include -DNDEBUG -KPIC  -xlibmieee  -c init.c -o init.o /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64  -PIC -g  -c -o solve.QP.compact.o solve.QP.compact.f /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64  -PIC -g  -c -o solve.QP.o solve.QP.f /opt/SunProd/studio12u3/solarisstudio12.3/bin/f95 -m64   -PIC  -g  -c util.f -o util.o /opt/SunProd/studio12u3/solarisstudio12.3/bin/ cc -xc99 -m64 -G -o quadprog.so aind.o init.o solve.QP.compact.o solve.QP.o util.o -xlic_lib=sunperf -lsunmath -lifai -lsunimath -lfai -lfai2 -lfsumai -lfprodai -lfminlai -lfmaxlai -lfminvai -lfmaxvai -lfui -lfsu -lsunmath -lmtsk -lm -lifai -lsunimath -lfai -lfai2 -lfsumai -lfprodai -lfminlai -lfmaxlai -lfminvai -lfmaxvai -lfui -lfsu -lsunmath -lmtsk -lm -L/usr/lib/64/R/lib -lR installing to /u01/app/oracle/product/12.1.0/dbhome_1/R/library/quadprog/libs ** R ** preparing package for lazy loading ** help *** installing help indices   converting help for package \u2018quadprog\u2019     finding HTML links ... done     solve.QP                                html      solve.QP.compact                        html  ** building package indices ** testing if installed package can be loaded * DONE (quadprog) ====== Here is an example from http://cran.r-project.org/web/packages/quadprog/quadprog.pdf > require(quadprog) > Dmat <- matrix(0,3,3) > diag(Dmat) <- 1 > dvec <- c(0,5,0) > Amat <- matrix(c(-4,-3,0,2,1,0,0,-2,1),3,3) > bvec <- c(-8,2,0) > solve.QP(Dmat,dvec,Amat,bvec=bvec) $solution [1] 0.4761905 1.0476190 2.0952381 $value [1] -2.380952 $unconstrained.solution [1] 0 5 0 $iterations [1] 3 0 $Lagrangian [1] 0.0000000 0.2380952 2.0952381 $iact [1] 3 2 Here, the standard example is modified to work with Oracle R Enterprise require(ORE) ore.connect("my-name", "my-sid", "my-host", "my-pass", 1521) ore.doEval(   function () {     require(quadprog)   } ) ore.doEval(   function () {     Dmat <- matrix(0,3,3)     diag(Dmat) <- 1     dvec <- c(0,5,0)     Amat <- matrix(c(-4,-3,0,2,1,0,0,-2,1),3,3)     bvec <- c(-8,2,0)    solve.QP(Dmat,dvec,Amat,bvec=bvec)   } ) $solution [1] 0.4761905 1.0476190 2.0952381 $value [1] -2.380952 $unconstrained.solution [1] 0 5 0 $iterations [1] 3 0 $Lagrangian [1] 0.0000000 0.2380952 2.0952381 $iact [1] 3 2 Now I can combine the quadprog compute algorithms with the Oracle R Enterprise Database engine functionality: Scale to large datasets Access to tables, views, and external tables in the database, as well as those accessible through database links Use SQL query parallel execution Use in-database statistical and data mining functionality

    Read the article

  • Solaris 10 branded zone VM Templates for Solaris 11 on OTN

    - by jsavit
    Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

    Read the article

  • Ops Center Solaris 11 IPS Repository Management: Using ISO Images

    - by S Stelting
    Please join us for a live WebEx presentation of this topic on Tuesday, November 20th at 9am MDT. Details for the call are provided below: https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209834017&UID=1512096072&PW=NYTVlZTYxMzdm&RT=MiMxMQ%3D%3D Meeting password: oracle123 Call-in toll-free number: 1-866-682-4770 International numbers: http://www.intercall.com/oracle/access_numbers.htm Conference Code: 762 9343 # Security Code: 7777 # With Enterprise Manager Ops Center 12c, you can provision, patch, monitor and manage Oracle Solaris 11 instances. To do this, Ops Center creates and maintains a Solaris 11 Image Packaging System (IPS) repository on the Enterprise Controller. During the Enterprise Controller configuration, you can load repository content directly from Oracle's Support Web site and subsequently synchronize the repository as new content becomes available. Of course, you can also use Solaris 11 ISO images to create and update your Ops Center repository. There are a few excellent reasons for doing this: You're running Ops Center in disconnected mode, and don't have Internet access on your Enterprise Controller You'd rather avoid the bandwidth associated with live synchronization of a Solaris 11 package repository This demo will show you how to use Solaris 11 ISO images to set up and update your Ops Center repository. Prerequisites This tip assumes that you've already installed the Enterprise Controller on a Solaris 11 OS instance and that you're ready for post-install configuration. In addition, there are specific Ops Center and OS version requirements depending on which version of Solaris 11 you plan to install.You can get full details about the requirements in the Release Notes for Ops Center 12c update 2. Additional information is available in the Ops Center update 2 Readme document. Part 1: Using a Solaris 11 ISO Image to Create an Ops Center Repository Step 1 – Download the Solaris 11 Repository Image The Oracle Web site provides a number of download links for official Solaris 11 images. Among those links is a two-part downloadable repository image, which provides repository content for Solaris 11 SPARC and X86 architectures. In this case, I used the Solaris 11 11/11 image. First, navigate to the Oracle Web site and accept the OTN License agreement: http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html Next, download both parts of the Solaris 11 repository image. I recommend using the Solaris 11 11/11 image, and have provided the URLs here: http://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-ahttp://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-b Finally, use the cat command to generate an ISO image you can use to create your repository: # cat sol-11-1111-repo-full.iso-a sol-11-1111-repo-full.iso-b > sol-11-1111-repo-full.iso The process is very similar if you plan to set up a Solaris 11.1 release in Ops Center. In that case, navigate to the Solaris 11 download page, accept the license agreement and download both parts of the Solaris 11.1 repository image. Use the cat command to create a single ISO image for Solaris 11.1 Step 2 – Mount the Solaris 11 ISO Image in your Local Filesystem Once you have created the Solaris 11 ISO file, use the mount command to attach it to your local filesystem. After the image has been mounted, you can browse the repository from the ./repo subdirectory, and use the pkgrepo command to verify that Solaris 11 recognizes the content: Step 3 – Use the Image to Create your Ops Center Repository When you have confirmed the repository is available, you can use the image to create the Enterprise Controller repository. The operation will be slightly different depending on whether you configure Ops Center for Connected or Disconnected Mode operation.For connected mode operation, specify the mounted ./repo directory in step 4.1 of the configuration wizard, replacing the default Web-based URL. Since you're synchronizing from an OS repository image, you don't need to specify a key or certificate for the operation. For disconnected mode configuration, specify the Solaris 11 directory along with the path to the disconnected mode bundle downloaded by running the Ops Center harvester script: Ops Center will run a job to import package content from the mounted ISO image. A synchronization job can take several hours to run – in my case, the job ran for 3 hours, 22 minutes on a SunFire X4200 M2 server. During the job, Ops Center performs three important tasks: Synchronizes all content from the image and refreshes the repository Updates the IPS publisher information Creates OS Provisioning profiles and policies based on the content When the job is complete, you can unmount the ISO image from your Enterprise Controller. At that time, you can view the repository contents in your Ops Center Solaris 11 library. For the Solaris 11 11/11 release, you should see 8,668 packages and patches in the contents. You should also see default deployment plans for Solaris 11 provisioning. As part of the repository import, Ops Center generates plans and profiles for desktop, small and large servers for the SPARC and X86 architecture. Part 2: Using a Solaris 11 SRU to update an Ops Center Repository It's possible to use the same approach to upgrade your Ops Center repository to a Solaris 11 Support Repository Update, or SRU. Each SRU provides packages and updates to Solaris 11 - for example, SRU 8.5 provided the packaged for Oracle VM Server for SPARC 2.2 SRUs are available for download as ISO images from My Oracle Support, under document ID 1372094.1. The document provides download links for all SRUs which have been released by Oracle for Solaris 11. SRUs are cumulative, so later versions include the packages from earlier SRUs. After downloading an ISO image for an SRU, you can mount it to your local filesystem using a mount command similar to the one shown for Solaris 11 11/11. When the ISO image is mounted to the file system, you can perform the Add Content action from the Solaris 11 Library to synchronize packages and patches from the mounted image. I used the same mount point, so the repository URL was file://mnt/repo once again: After the synchronization of an SRU is complete, you can verify its content in the Solaris 11 library using the search function. The version pattern is 0.175.0.#, where the # is the same value as the SRU. In this example, I upgraded to SRU 1. The update job ran in just under 8 minutes, and a quick search shows that 22 software components were added to the repository: It's also possible to search for "Support Repository Update" to confirm the SRU was successfully added to the repository. Details on any of the update content are available by clicking the "View Details" button under the Packages/Patches entry.

    Read the article

1