Search Results

Search found 925 results on 37 pages for 'spybot sd'.

Page 1/37 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Kingston SD reader not working for USB3

  - by user1146334

  I have a Kingston 4-in-1 Multimedia reader. When my PC was formatted with Win7 it worked fine. I decided to change to Ubuntu 14.04 and now it doesn't work. If I plug it into one of the USB2 ports it works fine, but whenever I plug it into one of the USB3 ports, it thinks about it for a minute and then dies. Here's the output of dmesg when it dies [110262.148656] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd [110262.170330] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110262.266379] usb 4-1: New USB device found, idVendor=11b0, idProduct=6348 [110262.266386] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [110262.266390] usb 4-1: Product: USB3.0 Media Reader [110262.266394] usb 4-1: Manufacturer: Kingston [110262.266398] usb 4-1: SerialNumber: 08735314400198 [110262.272929] usb-storage 4-1:1.0: USB Mass Storage device detected [110262.273239] scsi15 : usb-storage 4-1:1.0 [110263.290056] scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [110263.306622] scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [110263.323292] scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [110263.339858] scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [110263.340332] sd 15:0:0:0: Attached scsi generic sg3 type 0 [110263.340706] sd 15:0:0:1: Attached scsi generic sg4 type 0 [110263.340850] sd 15:0:0:2: Attached scsi generic sg5 type 0 [110263.340975] sd 15:0:0:3: Attached scsi generic sg6 type 0 [110264.651847] sd 15:0:0:1: [sde] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [110264.667049] sd 15:0:0:1: [sde] Write Protect is off [110264.667055] sd 15:0:0:1: [sde] Mode Sense: 2f 00 00 00 [110264.682767] sd 15:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [110264.694975] sd 15:0:0:2: [sdf] Attached SCSI removable disk [110264.697933] sd 15:0:0:3: [sdg] Attached SCSI removable disk [110264.729918] sd 15:0:0:0: [sdd] Attached SCSI removable disk [110264.754189] sde: sde1 [110264.760114] sd 15:0:0:1: [sde] Attached SCSI removable disk [110275.377368] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd [110275.398453] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110275.436592] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb9980 [110275.436600] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb99c0 [110277.263444] usb 4-1: USB disconnect, device number 3

  Read the article

• Disable write-protection on Micro SD

  - by Tim

  My task today is to open up and copy some files to 700 brand new micro SD cards. As I get going on this task I am finding that some of the Micro SD cards are telling me "sorry this drive is write protected" To copy the files I am using a standard SD to micro SD card adapter, and a USB SD card reader / writer. I have ensured that the switch is set to OFF on all of my adapters. As soon as I get a Micro SD that tells me it is write protected I can use the same adapter with another micro SD and it works fine, so I know the problem is not with my adapters. My question is: How can I disable the write protection on a Micro SD card? This eHow article seems to indicate that there is also a physical switch on Micro SD cards. However I have personally never seen a Micro SD with a physical switch, and none of the ones I am using today have said switch. Since these cards are brand new and thus empty are the ones that are telling me they are write protected simply useless? Could this be caused by some sort of defect in the cards?

  Read the article

• Unable to transfer data to or from mounted hard drive

  - by user210335

  So usually i'm good at sorting out issues. But this one has me at a loss! This issues has occured since upgrading my ubuntu so this was workingg prior. I use mounted hard drives to manage my downloads which are then copied over accordingly by a python based app. I found it was having issues with permissions to create anything on these mounted hard drives. I'm able to play and access he content of these drives so they're not faulty. My mount script looks like the following rw,user,exec,auto I really am stuck. Could anyone shed any light on how to fix this and allow me to access it. I've checked the properties and all groups should have read and write access so i'm very confused! thanks, edit here's the output of my mount options /dev/sda2 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /sys/firmware/efi/efivars type efivarfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) /dev/sda1 on /boot/efi type vfat (rw) /dev/sdc1 on /mnt/tv type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sdb1 on /mnt/B88A30E88A30A4B2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=simon) /dev/sdd1 on /media/simon/New Volume3 type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) the main mount in question is /dev/sdc1 on /mnt/tv type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) heres my dmesg output. I tried cchanging permissions in a terminal and I got an io error. [52803.343417] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.343420] sd 2:0:0:0: [sdc] CDB: [52803.343422] Read(10): 28 00 00 60 9e 3f 00 00 08 00 [52803.343805] sd 2:0:0:0: [sdc] Unhandled error code [52803.343808] sd 2:0:0:0: [sdc] [52803.343810] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.343812] sd 2:0:0:0: [sdc] CDB: [52803.343813] Read(10): 28 00 00 67 64 67 00 00 08 00 [52803.344389] sd 2:0:0:0: [sdc] Unhandled error code [52803.344392] sd 2:0:0:0: [sdc] [52803.344394] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344396] sd 2:0:0:0: [sdc] CDB: [52803.344397] Read(10): 28 00 09 bd e7 6f 00 00 08 00 [52803.344584] sd 2:0:0:0: [sdc] Unhandled error code [52803.344587] sd 2:0:0:0: [sdc] [52803.344589] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344591] sd 2:0:0:0: [sdc] CDB: [52803.344592] Read(10): 28 00 07 3a cf b7 00 00 08 00 [52803.344776] sd 2:0:0:0: [sdc] Unhandled error code [52803.344779] sd 2:0:0:0: [sdc] [52803.344781] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344783] sd 2:0:0:0: [sdc] CDB: [52803.344784] Read(10): 28 00 09 bd e7 97 00 00 08 00 [52803.344973] sd 2:0:0:0: [sdc] Unhandled error code [52803.344976] sd 2:0:0:0: [sdc] [52803.344978] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.344980] sd 2:0:0:0: [sdc] CDB: [52803.344981] Read(10): 28 00 08 dd 57 ef 00 00 08 00 [52803.346745] sd 2:0:0:0: [sdc] Unhandled error code [52803.346748] sd 2:0:0:0: [sdc] [52803.346750] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.346752] sd 2:0:0:0: [sdc] CDB: [52803.346754] Read(10): 28 00 07 1a c1 0f 00 00 08 00 [52803.349939] sd 2:0:0:0: [sdc] Unhandled error code [52803.349942] sd 2:0:0:0: [sdc] [52803.349944] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.349946] sd 2:0:0:0: [sdc] CDB: [52803.349948] Read(10): 28 00 00 67 64 9f 00 00 08 00 [52803.350147] sd 2:0:0:0: [sdc] Unhandled error code [52803.350150] sd 2:0:0:0: [sdc] [52803.350152] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.350154] sd 2:0:0:0: [sdc] CDB: [52803.350155] Read(10): 28 00 00 67 64 97 00 00 08 00 [52803.351302] sd 2:0:0:0: [sdc] Unhandled error code [52803.351305] sd 2:0:0:0: [sdc] [52803.351307] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.351309] sd 2:0:0:0: [sdc] CDB: [52803.351311] Read(10): 28 00 00 a4 1d cf 00 00 08 00 [52803.351894] sd 2:0:0:0: [sdc] Unhandled error code [52803.351897] sd 2:0:0:0: [sdc] [52803.351899] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.351901] sd 2:0:0:0: [sdc] CDB: [52803.351902] Read(10): 28 00 00 67 67 3f 00 00 08 00 [52803.353163] sd 2:0:0:0: [sdc] Unhandled error code [52803.353166] sd 2:0:0:0: [sdc] [52803.353168] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.353170] sd 2:0:0:0: [sdc] CDB: [52803.353172] Read(10): 28 00 00 67 64 ef 00 00 08 00 [52803.353917] sd 2:0:0:0: [sdc] Unhandled error code [52803.353920] sd 2:0:0:0: [sdc] [52803.353922] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.353924] sd 2:0:0:0: [sdc] CDB: [52803.353925] Read(10): 28 00 00 67 65 17 00 00 08 00 [52803.354484] sd 2:0:0:0: [sdc] Unhandled error code [52803.354487] sd 2:0:0:0: [sdc] [52803.354489] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.354491] sd 2:0:0:0: [sdc] CDB: [52803.354492] Read(10): 28 00 07 1a d8 9f 00 00 08 00 [52803.355005] sd 2:0:0:0: [sdc] Unhandled error code [52803.355010] sd 2:0:0:0: [sdc] [52803.355013] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355017] sd 2:0:0:0: [sdc] CDB: [52803.355019] Read(10): 28 00 00 67 65 3f 00 00 08 00 [52803.355293] sd 2:0:0:0: [sdc] Unhandled error code [52803.355298] sd 2:0:0:0: [sdc] [52803.355301] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355305] sd 2:0:0:0: [sdc] CDB: [52803.355308] Read(10): 28 00 00 a4 20 27 00 00 08 00 [52803.355575] sd 2:0:0:0: [sdc] Unhandled error code [52803.355580] sd 2:0:0:0: [sdc] [52803.355583] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.355587] sd 2:0:0:0: [sdc] CDB: [52803.355589] Read(10): 28 00 00 5d dc 67 00 00 08 00 [52803.356647] sd 2:0:0:0: [sdc] Unhandled error code [52803.356650] sd 2:0:0:0: [sdc] [52803.356652] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.356654] sd 2:0:0:0: [sdc] CDB: [52803.356655] Read(10): 28 00 07 1a dd 3f 00 00 08 00 [52803.357108] sd 2:0:0:0: [sdc] Unhandled error code [52803.357111] sd 2:0:0:0: [sdc] [52803.357113] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.357115] sd 2:0:0:0: [sdc] CDB: [52803.357116] Read(10): 28 00 00 67 65 97 00 00 08 00 [52803.357298] sd 2:0:0:0: [sdc] Unhandled error code [52803.357300] sd 2:0:0:0: [sdc] [52803.357302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.357304] sd 2:0:0:0: [sdc] CDB: [52803.357306] Read(10): 28 00 07 1a 04 d7 00 00 08 00 [52803.360374] sd 2:0:0:0: [sdc] Unhandled error code [52803.360377] sd 2:0:0:0: [sdc] [52803.360379] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.360382] sd 2:0:0:0: [sdc] CDB: [52803.360383] Read(10): 28 00 00 67 65 b7 00 00 08 00 [52803.360581] sd 2:0:0:0: [sdc] Unhandled error code [52803.360584] sd 2:0:0:0: [sdc] [52803.360586] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.360588] sd 2:0:0:0: [sdc] CDB: [52803.360589] Read(10): 28 00 00 67 65 c7 00 00 08 00 [52803.361352] sd 2:0:0:0: [sdc] Unhandled error code [52803.361355] sd 2:0:0:0: [sdc] [52803.361357] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.361359] sd 2:0:0:0: [sdc] CDB: [52803.361360] Read(10): 28 00 09 bd e1 af 00 00 08 00 [52803.362096] sd 2:0:0:0: [sdc] Unhandled error code [52803.362099] sd 2:0:0:0: [sdc] [52803.362101] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362103] sd 2:0:0:0: [sdc] CDB: [52803.362104] Read(10): 28 00 07 0a 64 e7 00 00 08 00 [52803.362555] sd 2:0:0:0: [sdc] Unhandled error code [52803.362558] sd 2:0:0:0: [sdc] [52803.362560] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362562] sd 2:0:0:0: [sdc] CDB: [52803.362563] Read(10): 28 00 00 67 65 d7 00 00 08 00 [52803.362747] sd 2:0:0:0: [sdc] Unhandled error code [52803.362750] sd 2:0:0:0: [sdc] [52803.362752] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362754] sd 2:0:0:0: [sdc] CDB: [52803.362755] Read(10): 28 00 01 4c 12 6f 00 00 08 00 [52803.362977] sd 2:0:0:0: [sdc] Unhandled error code [52803.362980] sd 2:0:0:0: [sdc] [52803.362982] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.362984] sd 2:0:0:0: [sdc] CDB: [52803.362985] Read(10): 28 00 03 85 43 7f 00 00 08 00 [52803.365197] sd 2:0:0:0: [sdc] Unhandled error code [52803.365200] sd 2:0:0:0: [sdc] [52803.365202] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.365204] sd 2:0:0:0: [sdc] CDB: [52803.365206] Read(10): 28 00 07 15 46 4f 00 00 08 00 [52803.365524] sd 2:0:0:0: [sdc] Unhandled error code [52803.365527] sd 2:0:0:0: [sdc] [52803.365528] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.365531] sd 2:0:0:0: [sdc] CDB: [52803.365532] Read(10): 28 00 07 11 78 8f 00 00 08 00 [52803.369355] sd 2:0:0:0: [sdc] Unhandled error code [52803.369360] sd 2:0:0:0: [sdc] [52803.369362] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.369365] sd 2:0:0:0: [sdc] CDB: [52803.369366] Read(10): 28 00 09 bd e2 8f 00 00 08 00 [52803.370806] sd 2:0:0:0: [sdc] Unhandled error code [52803.370809] sd 2:0:0:0: [sdc] [52803.370811] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.370814] sd 2:0:0:0: [sdc] CDB: [52803.370815] Read(10): 28 00 07 1a c6 37 00 00 08 00 [52803.371630] sd 2:0:0:0: [sdc] Unhandled error code [52803.371634] sd 2:0:0:0: [sdc] [52803.371636] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.371639] sd 2:0:0:0: [sdc] CDB: [52803.371640] Read(10): 28 00 00 67 66 57 00 00 08 00 [52803.371863] sd 2:0:0:0: [sdc] Unhandled error code [52803.371867] sd 2:0:0:0: [sdc] [52803.371868] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.371871] sd 2:0:0:0: [sdc] CDB: [52803.371872] Read(10): 28 00 00 64 0b df 00 00 08 00 [52803.373467] sd 2:0:0:0: [sdc] Unhandled error code [52803.373470] sd 2:0:0:0: [sdc] [52803.373472] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.373474] sd 2:0:0:0: [sdc] CDB: [52803.373476] Read(10): 28 00 00 60 83 7f 00 00 08 00 [52803.373655] sd 2:0:0:0: [sdc] Unhandled error code [52803.373658] sd 2:0:0:0: [sdc] [52803.373660] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.373662] sd 2:0:0:0: [sdc] CDB: [52803.373663] Read(10): 28 00 00 60 83 7f 00 00 08 00 [52803.374063] sd 2:0:0:0: [sdc] Unhandled error code [52803.374066] sd 2:0:0:0: [sdc] [52803.374068] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.374070] sd 2:0:0:0: [sdc] CDB: [52803.374071] Read(10): 28 00 08 db d5 5f 00 00 08 00 [52803.374602] sd 2:0:0:0: [sdc] Unhandled error code [52803.374605] sd 2:0:0:0: [sdc] [52803.374607] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.374609] sd 2:0:0:0: [sdc] CDB: [52803.374611] Read(10): 28 00 07 1a bf a7 00 00 08 00 [52803.375259] sd 2:0:0:0: [sdc] Unhandled error code [52803.375264] sd 2:0:0:0: [sdc] [52803.375267] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.375270] sd 2:0:0:0: [sdc] CDB: [52803.375272] Read(10): 28 00 00 67 66 87 00 00 08 00 [52803.375515] sd 2:0:0:0: [sdc] Unhandled error code [52803.375520] sd 2:0:0:0: [sdc] [52803.375522] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.375526] sd 2:0:0:0: [sdc] CDB: [52803.375527] Read(10): 28 00 00 62 54 8f 00 00 08 00 [52803.378506] sd 2:0:0:0: [sdc] Unhandled error code [52803.378513] sd 2:0:0:0: [sdc] [52803.378516] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.378520] sd 2:0:0:0: [sdc] CDB: [52803.378522] Read(10): 28 00 00 67 66 bf 00 00 08 00 [52803.381048] sd 2:0:0:0: [sdc] Unhandled error code [52803.381054] sd 2:0:0:0: [sdc] [52803.381057] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381061] sd 2:0:0:0: [sdc] CDB: [52803.381063] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381238] sd 2:0:0:0: [sdc] Unhandled error code [52803.381242] sd 2:0:0:0: [sdc] [52803.381245] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381248] sd 2:0:0:0: [sdc] CDB: [52803.381250] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381382] sd 2:0:0:0: [sdc] Unhandled error code [52803.381386] sd 2:0:0:0: [sdc] [52803.381388] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381392] sd 2:0:0:0: [sdc] CDB: [52803.381394] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.381569] sd 2:0:0:0: [sdc] Unhandled error code [52803.381573] sd 2:0:0:0: [sdc] [52803.381575] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.381579] sd 2:0:0:0: [sdc] CDB: [52803.381581] Read(10): 28 00 00 60 ae 77 00 00 08 00 [52803.382295] sd 2:0:0:0: [sdc] Unhandled error code [52803.382300] sd 2:0:0:0: [sdc] [52803.382302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382306] sd 2:0:0:0: [sdc] CDB: [52803.382307] Read(10): 28 00 00 67 6a 87 00 00 08 00 [52803.382552] sd 2:0:0:0: [sdc] Unhandled error code [52803.382556] sd 2:0:0:0: [sdc] [52803.382558] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382562] sd 2:0:0:0: [sdc] CDB: [52803.382564] Read(10): 28 00 00 67 6a af 00 00 08 00 [52803.382794] sd 2:0:0:0: [sdc] Unhandled error code [52803.382798] sd 2:0:0:0: [sdc] [52803.382801] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.382804] sd 2:0:0:0: [sdc] CDB: [52803.382806] Read(10): 28 00 00 67 6a c7 00 00 08 00 [52803.383269] sd 2:0:0:0: [sdc] Unhandled error code [52803.383274] sd 2:0:0:0: [sdc] [52803.383277] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.383280] sd 2:0:0:0: [sdc] CDB: [52803.383282] Read(10): 28 00 00 67 6a f7 00 00 08 00 [52803.383556] sd 2:0:0:0: [sdc] Unhandled error code [52803.383560] sd 2:0:0:0: [sdc] [52803.383563] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.383566] sd 2:0:0:0: [sdc] CDB: [52803.383568] Read(10): 28 00 00 67 6b 2f 00 00 08 00 [52803.386185] sd 2:0:0:0: [sdc] Unhandled error code [52803.386191] sd 2:0:0:0: [sdc] [52803.386194] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.386198] sd 2:0:0:0: [sdc] CDB: [52803.386200] Read(10): 28 00 01 4c 1b bf 00 00 08 00 [52803.386454] sd 2:0:0:0: [sdc] Unhandled error code [52803.386458] sd 2:0:0:0: [sdc] [52803.386461] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.386465] sd 2:0:0:0: [sdc] CDB: [52803.386467] Read(10): 28 00 07 1a b4 1f 00 00 08 00 [52803.388320] sd 2:0:0:0: [sdc] Unhandled error code [52803.388324] sd 2:0:0:0: [sdc] [52803.388326] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.388328] sd 2:0:0:0: [sdc] CDB: [52803.388329] Read(10): 28 00 09 bd de 17 00 00 08 00 [52803.388836] sd 2:0:0:0: [sdc] Unhandled error code [52803.388838] sd 2:0:0:0: [sdc] [52803.388839] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.388841] sd 2:0:0:0: [sdc] CDB: [52803.388842] Read(10): 28 00 07 57 9f ff 00 00 08 00 [52803.389124] sd 2:0:0:0: [sdc] Unhandled error code [52803.389126] sd 2:0:0:0: [sdc] [52803.389127] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.389129] sd 2:0:0:0: [sdc] CDB: [52803.389130] Read(10): 28 00 00 67 6b 8f 00 00 08 00 [52803.389244] sd 2:0:0:0: [sdc] Unhandled error code [52803.389246] sd 2:0:0:0: [sdc] [52803.389248] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.389249] sd 2:0:0:0: [sdc] CDB: [52803.389250] Read(10): 28 00 07 e9 ee ff 00 00 08 00 [52803.390386] sd 2:0:0:0: [sdc] Unhandled error code [52803.390389] sd 2:0:0:0: [sdc] [52803.390390] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390392] sd 2:0:0:0: [sdc] CDB: [52803.390393] Read(10): 28 00 07 1a be 0f 00 00 08 00 [52803.390682] sd 2:0:0:0: [sdc] Unhandled error code [52803.390685] sd 2:0:0:0: [sdc] [52803.390686] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390688] sd 2:0:0:0: [sdc] CDB: [52803.390689] Read(10): 28 00 00 67 6b e7 00 00 08 00 [52803.390804] sd 2:0:0:0: [sdc] Unhandled error code [52803.390806] sd 2:0:0:0: [sdc] [52803.390808] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.390809] sd 2:0:0:0: [sdc] CDB: [52803.390810] Read(10): 28 00 07 ed 17 bf 00 00 08 00 [52803.391449] sd 2:0:0:0: [sdc] Unhandled error code [52803.391451] sd 2:0:0:0: [sdc] [52803.391452] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.391454] sd 2:0:0:0: [sdc] CDB: [52803.391455] Read(10): 28 00 09 bd e5 9f 00 00 08 00 [52803.391956] sd 2:0:0:0: [sdc] Unhandled error code [52803.391958] sd 2:0:0:0: [sdc] [52803.391960] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.391961] sd 2:0:0:0: [sdc] CDB: [52803.391962] Read(10): 28 00 00 b5 86 a7 00 00 08 00 [52803.392293] sd 2:0:0:0: [sdc] Unhandled error code [52803.392295] sd 2:0:0:0: [sdc] [52803.392296] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392298] sd 2:0:0:0: [sdc] CDB: [52803.392299] Read(10): 28 00 07 18 bf bf 00 00 08 00 [52803.392843] sd 2:0:0:0: [sdc] Unhandled error code [52803.392845] sd 2:0:0:0: [sdc] [52803.392846] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392848] sd 2:0:0:0: [sdc] CDB: [52803.392849] Read(10): 28 00 00 60 b3 1f 00 00 08 00 [52803.392929] sd 2:0:0:0: [sdc] Unhandled error code [52803.392931] sd 2:0:0:0: [sdc] [52803.392932] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.392934] sd 2:0:0:0: [sdc] CDB: [52803.392935] Read(10): 28 00 00 60 b3 1f 00 00 08 00 [52803.393057] sd 2:0:0:0: [sdc] Unhandled error code [52803.393059] sd 2:0:0:0: [sdc] [52803.393060] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393062] sd 2:0:0:0: [sdc] CDB: [52803.393063] Read(10): 28 00 00 60 83 9f 00 00 08 00 [52803.393286] sd 2:0:0:0: [sdc] Unhandled error code [52803.393288] sd 2:0:0:0: [sdc] [52803.393289] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393291] sd 2:0:0:0: [sdc] CDB: [52803.393292] Read(10): 28 00 00 67 6b bf 00 00 08 00 [52803.393720] sd 2:0:0:0: [sdc] Unhandled error code [52803.393722] sd 2:0:0:0: [sdc] [52803.393723] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393725] sd 2:0:0:0: [sdc] CDB: [52803.393725] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393806] sd 2:0:0:0: [sdc] Unhandled error code [52803.393808] sd 2:0:0:0: [sdc] [52803.393809] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393810] sd 2:0:0:0: [sdc] CDB: [52803.393811] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393892] sd 2:0:0:0: [sdc] Unhandled error code [52803.393894] sd 2:0:0:0: [sdc] [52803.393895] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393896] sd 2:0:0:0: [sdc] CDB: [52803.393897] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.393974] sd 2:0:0:0: [sdc] Unhandled error code [52803.393976] sd 2:0:0:0: [sdc] [52803.393977] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.393978] sd 2:0:0:0: [sdc] CDB: [52803.393979] Read(10): 28 00 00 60 b2 17 00 00 08 00 [52803.394298] sd 2:0:0:0: [sdc] Unhandled error code [52803.394300] sd 2:0:0:0: [sdc] [52803.394302] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.394303] sd 2:0:0:0: [sdc] CDB: [52803.394304] Read(10): 28 00 00 5d a6 a7 00 00 08 00 [52803.395577] sd 2:0:0:0: [sdc] Unhandled error code [52803.395580] sd 2:0:0:0: [sdc] [52803.395582] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395584] sd 2:0:0:0: [sdc] CDB: [52803.395585] Read(10): 28 00 00 00 01 9f 00 00 08 00 [52803.395721] sd 2:0:0:0: [sdc] Unhandled error code [52803.395724] sd 2:0:0:0: [sdc] [52803.395725] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395726] sd 2:0:0:0: [sdc] CDB: [52803.395727] Read(10): 28 00 00 00 01 67 00 00 08 00 [52803.395843] sd 2:0:0:0: [sdc] Unhandled error code [52803.395845] sd 2:0:0:0: [sdc] [52803.395846] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395847] sd 2:0:0:0: [sdc] CDB: [52803.395848] Read(10): 28 00 02 a8 33 77 00 00 08 00 [52803.395960] sd 2:0:0:0: [sdc] Unhandled error code [52803.395962] sd 2:0:0:0: [sdc] [52803.395963] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.395965] sd 2:0:0:0: [sdc] CDB: [52803.395965] Read(10): 28 00 00 b5 ae 7f 00 00 08 00 [52803.396077] sd 2:0:0:0: [sdc] Unhandled error code [52803.396079] sd 2:0:0:0: [sdc] [52803.396080] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396082] sd 2:0:0:0: [sdc] CDB: [52803.396083] Read(10): 28 00 00 63 64 bf 00 00 08 00 [52803.396193] sd 2:0:0:0: [sdc] Unhandled error code [52803.396195] sd 2:0:0:0: [sdc] [52803.396196] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396198] sd 2:0:0:0: [sdc] CDB: [52803.396199] Read(10): 28 00 07 1a e2 e7 00 00 08 00 [52803.396313] sd 2:0:0:0: [sdc] Unhandled error code [52803.396315] sd 2:0:0:0: [sdc] [52803.396316] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396318] sd 2:0:0:0: [sdc] CDB: [52803.396319] Read(10): 28 00 07 1a b9 87 00 00 08 00 [52803.396435] sd 2:0:0:0: [sdc] Unhandled error code [52803.396437] sd 2:0:0:0: [sdc] [52803.396438] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396439] sd 2:0:0:0: [sdc] CDB: [52803.396441] Read(10): 28 00 02 ce 8e df 00 00 08 00 [52803.396555] sd 2:0:0:0: [sdc] Unhandled error code [52803.396557] sd 2:0:0:0: [sdc] [52803.396558] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396560] sd 2:0:0:0: [sdc] CDB: [52803.396561] Read(10): 28 00 0e 66 6d f7 00 00 08 00 [52803.396769] sd 2:0:0:0: [sdc] Unhandled error code [52803.396770] sd 2:0:0:0: [sdc] [52803.396772] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396773] sd 2:0:0:0: [sdc] CDB: [52803.396774] Read(10): 28 00 07 1a e4 2f 00 00 08 00 [52803.396886] sd 2:0:0:0: [sdc] Unhandled error code [52803.396888] sd 2:0:0:0: [sdc] [52803.396889] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.396890] sd 2:0:0:0: [sdc] CDB: [52803.396891] Read(10): 28 00 00 63 d4 3f 00 00 08 00 [52803.397002] sd 2:0:0:0: [sdc] Unhandled error code [52803.397004] sd 2:0:0:0: [sdc] [52803.397005] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.397007] sd 2:0:0:0: [sdc] CDB: [52803.397007] Read(10): 28 00 07 1a e4 1f 00 00 08 00 [52803.400074] sd 2:0:0:0: [sdc] Unhandled error code [52803.400078] sd 2:0:0:0: [sdc] [52803.400079] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400081] sd 2:0:0:0: [sdc] CDB: [52803.400082] Read(10): 28 00 07 16 c7 5f 00 00 08 00 [52803.400318] sd 2:0:0:0: [sdc] Unhandled error code [52803.400320] sd 2:0:0:0: [sdc] [52803.400322] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400323] sd 2:0:0:0: [sdc] CDB: [52803.400324] Read(10): 28 00 00 60 01 87 00 00 08 00 [52803.400408] sd 2:0:0:0: [sdc] Unhandled error code [52803.400410] sd 2:0:0:0: [sdc] [52803.400412] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400413] sd 2:0:0:0: [sdc] CDB: [52803.400414] Read(10): 28 00 00 60 01 0f 00 00 08 00 [52803.400564] sd 2:0:0:0: [sdc] Unhandled error code [52803.400566] sd 2:0:0:0: [sdc] [52803.400568] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400569] sd 2:0:0:0: [sdc] CDB: [52803.400570] Read(10): 28 00 00 5d d1 d7 00 00 08 00 [52803.400841] sd 2:0:0:0: [sdc] Unhandled error code [52803.400843] sd 2:0:0:0: [sdc] [52803.400844] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.400846] sd 2:0:0:0: [sdc] CDB: [52803.400847] Read(10): 28 00 07 1a e3 47 00 00 08 00 [52803.401151] sd 2:0:0:0: [sdc] Unhandled error code [52803.401153] sd 2:0:0:0: [sdc] [52803.401155] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401156] sd 2:0:0:0: [sdc] CDB: [52803.401157] Read(10): 28 00 07 1a b9 1f 00 00 08 00 [52803.401310] sd 2:0:0:0: [sdc] Unhandled error code [52803.401312] sd 2:0:0:0: [sdc] [52803.401313] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401315] sd 2:0:0:0: [sdc] CDB: [52803.401316] Read(10): 28 00 00 a4 1b 57 00 00 08 00 [52803.401877] sd 2:0:0:0: [sdc] Unhandled error code [52803.401879] sd 2:0:0:0: [sdc] [52803.401880] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.401881] sd 2:0:0:0: [sdc] CDB: [52803.401882] Read(10): 28 00 0e 66 35 47 00 00 08 00 [52803.402032] sd 2:0:0:0: [sdc] Unhandled error code [52803.402033] sd 2:0:0:0: [sdc] [52803.402034] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402036] sd 2:0:0:0: [sdc] CDB: [52803.402037] Read(10): 28 00 06 30 69 ff 00 00 08 00 [52803.402148] sd 2:0:0:0: [sdc] Unhandled error code [52803.402150] sd 2:0:0:0: [sdc] [52803.402151] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402153] sd 2:0:0:0: [sdc] CDB: [52803.402154] Read(10): 28 00 09 bd d8 77 00 00 08 00 [52803.402263] sd 2:0:0:0: [sdc] Unhandled error code [52803.402265] sd 2:0:0:0: [sdc] [52803.402266] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402267] sd 2:0:0:0: [sdc] CDB: [52803.402268] Read(10): 28 00 00 5d ff 77 00 00 08 00 [52803.402376] sd 2:0:0:0: [sdc] Unhandled error code [52803.402378] sd 2:0:0:0: [sdc] [52803.402379] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402381] sd 2:0:0:0: [sdc] CDB: [52803.402382] Read(10): 28 00 00 5d ff 7f 00 00 08 00 [52803.402490] sd 2:0:0:0: [sdc] Unhandled error code [52803.402492] sd 2:0:0:0: [sdc] [52803.402493] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402495] sd 2:0:0:0: [sdc] CDB: [52803.402496] Read(10): 28 00 00 00 01 2f 00 00 08 00 [52803.402602] sd 2:0:0:0: [sdc] Unhandled error code [52803.402604] sd 2:0:0:0: [sdc] [52803.402605] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402607] sd 2:0:0:0: [sdc] CDB: [52803.402608] Read(10): 28 00 00 b5 ac 8f 00 00 08 00 [52803.402715] sd 2:0:0:0: [sdc] Unhandled error code [52803.402717] sd 2:0:0:0: [sdc] [52803.402719] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402720] sd 2:0:0:0: [sdc] CDB: [52803.402721] Read(10): 28 00 00 e1 18 ff 00 00 08 00 [52803.402829] sd 2:0:0:0: [sdc] Unhandled error code [52803.402831] sd 2:0:0:0: [sdc] [52803.402833] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.402834] sd 2:0:0:0: [sdc] CDB: [52803.402835] Read(10): 28 00 09 bd ea cf 00 00 08 00 [52803.403999] sd 2:0:0:0: [sdc] Unhandled error code [52803.404001] sd 2:0:0:0: [sdc] [52803.404003] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52803.404005] sd 2:0:0:0: [sdc] CDB: [52803.404006] Read(10): 28 00 07 1a b8 f7 00 00 08 00 [52832.950225] sd 2:0:0:0: [sdc] Unhandled error code [52832.950230] sd 2:0:0:0: [sdc] [52832.950233] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52832.950235] sd 2:0:0:0: [sdc] CDB: [52832.950237] Write(10): 2a 00 00 60 bf 7f 00 00 08 00 [52832.950247] blk_update_request: 1077 callbacks suppressed [52832.950250] end_request: I/O error, dev sdc, sector 6340479 [52832.950253] quiet_error: 1077 callbacks suppressed [52832.950256] Buffer I/O error on device sdc1, logical block 792552 [52832.950258] lost page write due to I/O error on sdc1 [52832.950269] sd 2:0:0:0: [sdc] Unhandled error code [52832.950272] sd 2:0:0:0: [sdc] [52832.950273] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [52832.950276] sd 2:0:0:0: [sdc] CDB: [52832.950277] Write(10): 2a 00 01 a5 f1 4f 00 00 08 00 [52832.950285] end_request: I/O error, dev sdc, sector 27652431 [52832.950287] Buffer I/O error on device sdc1, logical block 3456546 [52832.950289] lost page write due to I/O error on sdc1

  Read the article

• How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

  - by Chris Hoffman

  Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

  Read the article

• Sd card bigger than 2gb is not recognized in ubuntu 12.04

  - by dex1

  When I insert a card up to 2gb it is immediately seen by the system but if try it with bigger one it's not seen. I presume the issue is not due to the card reader itself as it reads all cards under windows 7 but due to linux driver. I could see some people having similar issues but no solution. Any help appreciated. GParted doesnt see cards bigger than 2gb. After insertion small card ubuntu@ubuntu:~$ dmesg [10169.384481] mmc0: new SD card at address a95c [10169.384870] mmcblk0: mmc0:a95c SD016 14.0 MiB [10169.386715] mmcblk0: p1 everything worked fine then I removed the small one and put 8gb, waited for 2min [10295.736422] mmc0: card a95c removed [10362.448383] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10372.480076] mmc0: Timeout waiting for hardware interrupt. [10382.496146] mmc0: Timeout waiting for hardware interrupt. [10392.512149] mmc0: Timeout waiting for hardware interrupt. [10402.528145] mmc0: Timeout waiting for hardware interrupt. [10402.529267] mmc0: error -110 whilst initialising SD card [10402.748807] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10412.768063] mmc0: Timeout waiting for hardware interrupt. [10422.784051] mmc0: Timeout waiting for hardware interrupt. [10432.800076] mmc0: Timeout waiting for hardware interrupt. [10442.816067] mmc0: Timeout waiting for hardware interrupt. [10442.817165] mmc0: error -110 whilst initialising SD card [10443.040805] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10453.056145] mmc0: Timeout waiting for hardware interrupt. [10463.072139] mmc0: Timeout waiting for hardware interrupt. [10473.088050] mmc0: Timeout waiting for hardware interrupt. [10483.104046] mmc0: Timeout waiting for hardware interrupt. [10483.104107] mmc0: error -110 whilst initialising SD card [10483.328960] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10493.344144] mmc0: Timeout waiting for hardware interrupt. ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 16) 0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) Same cards, same machine (same reader) only different OS(win7) work flawlessly. Some interesting reading I came across but is Chinese for me http://www.mail-archive.com/[email protected]/msg14598.html and another bit http://article.gmane.org/gmane.linux.kernel.mmc/11973/match=sd+card+not+recognized

  Read the article

• DELL Inspiron 9400 SD Card Reader not working on 10.11 ubuntu

  - by Mario Martz

  Im new in linux, just installed Ubuntu 11.10 in a Dell Inspiron 9400, everything works fine with the exception of the SD card reader, everytime I insert a card the computer doesnt do anything, its like the SD card reader is not there. I did a $lspci and it shows the next drivers 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Everytime I insert a memory card, dmesg shows the next d status 0x600b00 [ 2687.227351] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.229436] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.229440] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.230512] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.230515] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.231588] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.231592] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.232674] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.232678] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.234763] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.234766] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.236864] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.236868] end_request: I/O error, dev mmcblk0, sector 70 [ 2687.238942] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.238946] end_request: I/O error, dev mmcblk0, sector 71 [ 2687.238949] Buffer I/O error on device mmcblk0, logical block 8 [ 2687.241028] mmcblk0: retrying using single block read [ 2687.243104] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.243108] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.245212] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.245215] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.247298] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.247302] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.248389] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.248393] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.250476] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.250480] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.252617] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.252621] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.254737] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 and more of the same but with different sector number Im using Kernel 3.0.0-12-generic By the way, when I was installing it and ubuntu asks about installation (If I want to install it along with windows or delete something or change the partitions of the HDD) if I go to the window to change the partition of the disc, linux detects the SD Card (if there's one inserted course). Any help with this it would be appreciated -sorry for my english Thank you

  Read the article

• SD Card Reader not working in Ubuntu 12.04

  - by tripkane

  I have a read many other posts on this issue and believe that Ubuntu 12.04 is not even recognizing my SD Card Reader as just that: Computer Model: Metabox (Australian builder of Clevo laptops) / Clevo P150EM OS: Ubuntu 12.04 (64 Bit) CPU: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz HD: 120GB Intel 550/520MB/s SSD According to the people who built my computer, the specs of the SD Card reader in my comp are as follows: Manufacture: Realtek Semiconduct Corp. Location: PCI bus 3 Hardware ID: PCI\Ven_10EC&DEV_5289&SUBSYS_51051558 Physical device object name: \Device\NTPNP_PCI0015 Here are the relevant outputs of the following commands run from the terminal: sudo lshw *-generic UNCLAIMED description: Unassigned class product: Realtek Semiconductor Co., Ltd. vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list configuration: latency=0 resources: memory:f6a00000-f6a0ffff sudo lspci -v -nn 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01) Subsystem: CLEVO/KAPOK Computer Device [1558:5105] Flags: bus master, fast devsel, latency 0, IRQ 4 Memory at f6a00000 (32-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable- Count=1 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Does the unassigned details of these outputs mean that Ubunutu desn't know that the SD Card Reader is one and what do with it? and if so how should I go about fixing it?? Cheers ;)

  Read the article

• SD to PCI adapter

  - by vy32

  We are looking for a way to plug a SD card into a PCI slot without going through a USB interface. We want to read the SD card's serial number directly and issue SD commands. The Chumby and the Google Android G1 phones both have SD slots that you can read from Linux without going through USB, but the Chumby only has a single SD card that's used for booting, and the G1 doesn't have any other reasonable storage if you use the SD card for that purpose. I'd really like a desktop with a few SD slots that are directly accessible. Anybody know of anything??

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

• SD card won't appear after upgrade to 13.10

  - by Pixel

  My SD card won't mount when I put it into my lap top, everything was fine before the upgrade. The information about the SD card appears just fine when I type "sudo fdisk l " it just says that it doesn't have a valid partition table. When I type "_sudo blkid" I get the following answer: /dev/sda1: UUID="CCA8-9030" TYPE="vfat" /dev/sda2: UUID="8a1d135b-384b-432d-b608-64dcf09ada24" TYPE="ext2" /dev/sda3: UUID="7s6PtU-kj2Z-N8XD-0mzl-840i-i3HG-enlbAf" TYPE="LVM2_member" /dev/sr0: LABEL="Bamboo CD" TYPE="iso9660" /dev/mapper/ubuntu--vg-root: UUID="c9b521c8-7c9f-493b-95c8-a7d79c465318" TYPE="ext4" /dev/mapper/ubuntu--vg-swap_1: UUID="7f155ab6-e1b9-485b-a2bc-443c0622284d" TYPE="swap" When I use lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I've read the other threads and I couldn't really find any good answers, my card reader was compatible with the previous version of ubuntu, so technically it should still be compatible with the next version. Also I can't erase what's on the card, it contains important data which I need... :/ If you need anymore information just ask, I'll give it as soon as I can. Pixel.

  Read the article

• Error splicing file: Input/output error with a USB SD/HC card reader [closed]

  - by PirateRussell

  I recently got a new Droid Bionic, and it has the SD/HC card. Today, I got a new USB card reader that reads the HC format. When I plug it into my Linux Mint 11 (katya), Gnome 32-bit computer, I get this error every I try to copy or move any file off of the card onto my desktop: Error splicing file: Input/output error I don't have the problem on a Windows Vista computer. Any ideas??? Thanks in advance...

  Read the article

• Macbook pro 8,1 ubuntu 12.04 sd card reader doesnt work

  - by mandy

  THe built in sd card reader on the macbook pro 8,1 (2011, early or mid i think) doesnt work AT ALL. However i read here.... https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801034 that someone plugged in ethernet and it works. How the hell does that make a difference? There has to be some kind of better workaround? I take my laptop on the go, thats why i bought a LAPTOP. I dont want to be tethered down. Please help?

  Read the article

• sd card won't mount when an android phone is connected after 12.10 fresh install

  - by Mysterio

  I just upgraded to 12.10 via a fresh install. Mounting my Xperia Neo V in 12.04 worked flawlessly however I just discovered that the sd card can't be detected and mounted in 12.10. How can I solve this? Thanks in advance. P. S. I can mount it via a card reader though and it mounts ok in Windows 7. So it surely can't be hardware related. EDIT: Sony Ericsson Neo V running Android 2.3.4. USB mass storage is already turned on.

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Frequent Disconnects ubuntu desktop 12.10 x64 intel 82579V e1000e

  - by user112055

  I'm having frequent disconnects with my new install of Ubuntu 12.10. I tried updating the kernel driver to the latest intel release to no avail. My expertise is spent. It happens anywhere between 1 min and 10 min. Any ideas? syslog: Dec 1 13:51:39 andromeda kernel: [ 972.188809] audit_printk_skb: 6 callbacks suppressed Dec 1 13:51:39 andromeda kernel: [ 972.188813] type=1701 audit(1354398699.418:199): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188817] type=1701 audit(1354398699.418:200): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188820] type=1701 audit(1354398699.418:201): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188823] type=1701 audit(1354398699.418:202): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188825] type=1701 audit(1354398699.418:203): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.331419] type=1701 audit(1354398699.558:204): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f26777d96b0 code=0x50000 Dec 1 13:53:12 andromeda NetworkManager[1115]: <info> (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Dec 1 13:53:12 andromeda kernel: [ 1064.894387] e1000e: e1000e: eth0 NIC Link is Down Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): device state change: activated -> unavailable (reason 'carrier-changed') [100 20 40] Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): deactivating device (reason 'carrier-changed') [40] Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): canceled DHCP transaction, DHCP client pid 5946 Dec 1 13:53:16 andromeda avahi-daemon[890]: Withdrawing address record for fe80::ea40:f2ff:fee2:4d86 on eth0. Dec 1 13:53:16 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:16 andromeda avahi-daemon[890]: Interface eth0.IPv6 no longer relevant for mDNS. Dec 1 13:53:16 andromeda kernel: [ 1069.025288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Dec 1 13:53:16 andromeda avahi-daemon[890]: Withdrawing address record for 192.168.11.17 on eth0. Dec 1 13:53:16 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:16 andromeda avahi-daemon[890]: Interface eth0.IPv4 no longer relevant for mDNS. Dec 1 13:53:16 andromeda NetworkManager[1115]: <warn> DNS: plugin dnsmasq update failed Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> ((null)): removing resolv.conf from /sbin/resolvconf Dec 1 13:53:16 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:16 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:16 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): carrier now ON (device state 20) Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Auto-activating connection '82579V'. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) starting connection '82579V' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Dec 1 13:53:32 andromeda kernel: [ 1084.938042] e1000e: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Dec 1 13:53:32 andromeda kernel: [ 1084.938049] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Dec 1 13:53:32 andromeda kernel: [ 1084.938815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> dhclient started with pid 6080 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Dec 1 13:53:32 andromeda dhclient: Internet Systems Consortium DHCP Client 4.2.4 Dec 1 13:53:32 andromeda dhclient: Copyright 2004-2012 Internet Systems Consortium. Dec 1 13:53:32 andromeda dhclient: All rights reserved. Dec 1 13:53:32 andromeda dhclient: For info, please visit https://www.isc.org/software/dhcp/ Dec 1 13:53:32 andromeda dhclient: Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed nbi -> preinit Dec 1 13:53:32 andromeda dhclient: Listening on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:53:32 andromeda dhclient: Sending on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:53:32 andromeda dhclient: Sending on Socket/fallback Dec 1 13:53:32 andromeda dhclient: DHCPREQUEST of 192.168.11.17 on eth0 to 255.255.255.255 port 67 Dec 1 13:53:32 andromeda dhclient: DHCPACK of 192.168.11.17 from 192.168.11.1 Dec 1 13:53:32 andromeda dhclient: bound to 192.168.11.17 -- renewal in 33576 seconds. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed preinit -> reboot Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> address 192.168.11.17 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> prefix 24 (255.255.255.0) Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> gateway 192.168.11.1 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> hostname 'andromeda' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> nameserver '192.168.11.1' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> domain name 'hsd1.ca.comcast.net' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started... Dec 1 13:53:32 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:32 andromeda avahi-daemon[890]: New relevant interface eth0.IPv4 for mDNS. Dec 1 13:53:32 andromeda avahi-daemon[890]: Registering new address record for 192.168.11.17 on eth0.IPv4. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> ((null)): writing resolv.conf to /sbin/resolvconf Dec 1 13:53:33 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:33 andromeda dnsmasq[1907]: using nameserver 192.168.11.1#53 Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Policy set '82579V' (eth0) as default for IPv4 routing and DNS. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Activation (eth0) successful, device activated. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. Dec 1 13:53:33 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:33 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:53:33 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:33 andromeda avahi-daemon[890]: New relevant interface eth0.IPv6 for mDNS. Dec 1 13:53:33 andromeda avahi-daemon[890]: Registering new address record for fe80::ea40:f2ff:fee2:4d86 on eth0.*. Dec 1 13:53:41 andromeda ntpdate[6154]: adjust time server 91.189.94.4 offset 0.000928 sec Dec 1 13:53:50 andromeda NetworkManager[1115]: <info> (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Dec 1 13:53:50 andromeda kernel: [ 1102.980003] e1000e: e1000e: eth0 NIC Link is Down Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): device state change: activated -> unavailable (reason 'carrier-changed') [100 20 40] Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): deactivating device (reason 'carrier-changed') [40] Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): canceled DHCP transaction, DHCP client pid 6080 Dec 1 13:53:54 andromeda avahi-daemon[890]: Withdrawing address record for fe80::ea40:f2ff:fee2:4d86 on eth0. Dec 1 13:53:54 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:54 andromeda avahi-daemon[890]: Interface eth0.IPv6 no longer relevant for mDNS. Dec 1 13:53:54 andromeda avahi-daemon[890]: Withdrawing address record for 192.168.11.17 on eth0. Dec 1 13:53:54 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:54 andromeda kernel: [ 1107.025959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Dec 1 13:53:54 andromeda NetworkManager[1115]: <warn> DNS: plugin dnsmasq update failed Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> ((null)): removing resolv.conf from /sbin/resolvconf Dec 1 13:53:54 andromeda avahi-daemon[890]: Interface eth0.IPv4 no longer relevant for mDNS. Dec 1 13:53:54 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:54 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:54 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): carrier now ON (device state 20) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Auto-activating connection '82579V'. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) starting connection '82579V' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Dec 1 13:54:10 andromeda kernel: [ 1123.167668] e1000e: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Dec 1 13:54:10 andromeda kernel: [ 1123.167675] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Dec 1 13:54:10 andromeda kernel: [ 1123.168430] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> dhclient started with pid 6212 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Dec 1 13:54:10 andromeda dhclient: Internet Systems Consortium DHCP Client 4.2.4 Dec 1 13:54:10 andromeda dhclient: Copyright 2004-2012 Internet Systems Consortium. Dec 1 13:54:10 andromeda dhclient: All rights reserved. Dec 1 13:54:10 andromeda dhclient: For info, please visit https://www.isc.org/software/dhcp/ Dec 1 13:54:10 andromeda dhclient: Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed nbi -> preinit Dec 1 13:54:10 andromeda dhclient: Listening on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:54:10 andromeda dhclient: Sending on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:54:10 andromeda dhclient: Sending on Socket/fallback Dec 1 13:54:10 andromeda dhclient: DHCPREQUEST of 192.168.11.17 on eth0 to 255.255.255.255 port 67 Dec 1 13:54:10 andromeda dhclient: DHCPACK of 192.168.11.17 from 192.168.11.1 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed preinit -> reboot Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> address 192.168.11.17 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> prefix 24 (255.255.255.0) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> gateway 192.168.11.1 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> hostname 'andromeda' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> nameserver '192.168.11.1' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> domain name 'hsd1.ca.comcast.net' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started... Dec 1 13:54:10 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:54:10 andromeda dhclient: bound to 192.168.11.17 -- renewal in 35416 seconds. Dec 1 13:54:10 andromeda avahi-daemon[890]: New relevant interface eth0.IPv4 for mDNS. Dec 1 13:54:10 andromeda avahi-daemon[890]: Registering new address record for 192.168.11.17 on eth0.IPv4. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> ((null)): writing resolv.conf to /sbin/resolvconf Dec 1 13:54:11 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:54:11 andromeda dnsmasq[1907]: using nameserver 192.168.11.1#53 Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Policy set '82579V' (eth0) as default for IPv4 routing and DNS. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Activation (eth0) successful, device activated. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. Dec 1 13:54:11 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:54:11 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:54:12 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:54:12 andromeda avahi-daemon[890]: New relevant interface eth0.IPv6 for mDNS. Dec 1 13:54:12 andromeda avahi-daemon[890]: Registering new address record for fe80::ea40:f2ff:fee2:4d86 on eth0.*. Dec 1 13:54:19 andromeda ntpdate[6286]: adjust time server 91.189.94.4 offset 0.001142 sec $ lspci -v 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) Subsystem: Intel Corporation Device 2031 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at f7f00000 (32-bit, non-prefetchable) [size=128K] Memory at f7f39000 (32-bit, non-prefetchable) [size=4K] I/O ports at f040 [size=32] Capabilities: [c8] Power Management version 2 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [e0] PCI Advanced Features Kernel driver in use: e1000e Kernel modules: e1000e $ modinfo e1000e filename: /lib/modules/3.5.0-19-generic/kernel/drivers/net/e1000e/e1000e.ko version: 2.1.4-NAPI license: GPL description: Intel(R) PRO/1000 Network Driver author: Intel Corporation, <[email protected]> srcversion: 0809529BE0BBC44883956AF alias: pci:v00008086d0000153Bsv*sd*bc*sc*i* alias: pci:v00008086d0000153Asv*sd*bc*sc*i* alias: pci:v00008086d00001503sv*sd*bc*sc*i* alias: pci:v00008086d00001502sv*sd*bc*sc*i* alias: pci:v00008086d000010F0sv*sd*bc*sc*i* alias: pci:v00008086d000010EFsv*sd*bc*sc*i* alias: pci:v00008086d000010EBsv*sd*bc*sc*i* alias: pci:v00008086d000010EAsv*sd*bc*sc*i* alias: pci:v00008086d00001525sv*sd*bc*sc*i* alias: pci:v00008086d000010DFsv*sd*bc*sc*i* alias: pci:v00008086d000010DEsv*sd*bc*sc*i* alias: pci:v00008086d000010CEsv*sd*bc*sc*i* alias: pci:v00008086d000010CDsv*sd*bc*sc*i* alias: pci:v00008086d000010CCsv*sd*bc*sc*i* alias: pci:v00008086d000010CBsv*sd*bc*sc*i* alias: pci:v00008086d000010F5sv*sd*bc*sc*i* alias: pci:v00008086d000010BFsv*sd*bc*sc*i* alias: pci:v00008086d000010E5sv*sd*bc*sc*i* alias: pci:v00008086d0000294Csv*sd*bc*sc*i* alias: pci:v00008086d000010BDsv*sd*bc*sc*i* alias: pci:v00008086d000010C3sv*sd*bc*sc*i* alias: pci:v00008086d000010C2sv*sd*bc*sc*i* alias: pci:v00008086d000010C0sv*sd*bc*sc*i* alias: pci:v00008086d00001501sv*sd*bc*sc*i* alias: pci:v00008086d00001049sv*sd*bc*sc*i* alias: pci:v00008086d0000104Dsv*sd*bc*sc*i* alias: pci:v00008086d0000104Bsv*sd*bc*sc*i* alias: pci:v00008086d0000104Asv*sd*bc*sc*i* alias: pci:v00008086d000010C4sv*sd*bc*sc*i* alias: pci:v00008086d000010C5sv*sd*bc*sc*i* alias: pci:v00008086d0000104Csv*sd*bc*sc*i* alias: pci:v00008086d000010BBsv*sd*bc*sc*i* alias: pci:v00008086d00001098sv*sd*bc*sc*i* alias: pci:v00008086d000010BAsv*sd*bc*sc*i* alias: pci:v00008086d00001096sv*sd*bc*sc*i* alias: pci:v00008086d0000150Csv*sd*bc*sc*i* alias: pci:v00008086d000010F6sv*sd*bc*sc*i* alias: pci:v00008086d000010D3sv*sd*bc*sc*i* alias: pci:v00008086d0000109Asv*sd*bc*sc*i* alias: pci:v00008086d0000108Csv*sd*bc*sc*i* alias: pci:v00008086d0000108Bsv*sd*bc*sc*i* alias: pci:v00008086d0000107Fsv*sd*bc*sc*i* alias: pci:v00008086d0000107Esv*sd*bc*sc*i* alias: pci:v00008086d0000107Dsv*sd*bc*sc*i* alias: pci:v00008086d000010B9sv*sd*bc*sc*i* alias: pci:v00008086d000010D5sv*sd*bc*sc*i* alias: pci:v00008086d000010DAsv*sd*bc*sc*i* alias: pci:v00008086d000010D9sv*sd*bc*sc*i* alias: pci:v00008086d00001060sv*sd*bc*sc*i* alias: pci:v00008086d000010A5sv*sd*bc*sc*i* alias: pci:v00008086d000010BCsv*sd*bc*sc*i* alias: pci:v00008086d000010A4sv*sd*bc*sc*i* alias: pci:v00008086d0000105Fsv*sd*bc*sc*i* alias: pci:v00008086d0000105Esv*sd*bc*sc*i* depends: vermagic: 3.5.0-19-generic SMP mod_unload modversions parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint) parm: TxIntDelay:Transmit Interrupt Delay (array of int) parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int) parm: RxIntDelay:Receive Interrupt Delay (array of int) parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int) parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int) parm: IntMode:Interrupt Mode (array of int) parm: SmartPowerDownEnable:Enable PHY smart power down (array of int) parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int) parm: CrcStripping:Enable CRC Stripping, disable if your BMC needs the CRC (array of int) parm: EEE:Enable/disable on parts that support the feature (array of int) parm: Node:[ROUTING] Node to allocate memory on, default -1 (array of int) parm: debug:Debug level (0=none,...,16=all) (int)

  Read the article

• Access files on Samsung Galaxy S3 external sd card using ubuntu 12.04

  - by nense

  I have a Samsung Galaxy s3 running the stock Samsung ROM and I'm trying to transfer files - videos, photos, music and downloads, from my handset to my system via USB running Ubuntu 12.04. I have followed to links suggested How to connect Samsung Galaxy S3 via USB? But it all goes over my head. Can anyone help me with a simple GUI program or a link so I can simply copy and paste selected files from my phone onto my system?

  Read the article

• SD Card reader not working on Sony Vaio

  - by TessellatingHeckler

  This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

  Read the article

• SD cards and CPRM protection

  - by Francesco Turco

  Before buying an SD memory card, I'd like to know something more about the CPRM protection, in particular: Does CPRM influence the way I am supposed to access my own data? That is, does CPRM encrypt it? Could CPRM prevent me from accessing my own data? Is it possible to disable or eliminate CPRM from either the memory card or the card reader? Are there manufacturers selling CPRM-free SD memory cards? Is there any real alternative to CPRM-protected SD memory cards beside USB flash drives? Is Linux support for SD cards good? Thanks.

  Read the article

• Please insert a disk into SD/MMC - Vista problem [closed]

  - by Naunidh

  Possible Duplicate: Please insert a disk into SD/MMC - Vista problem Hi I tried pushing my 2GB micro SD card using the inbuilt card reader. On clicking the drive I get "Please insert a disk into SD/MMC". This problem is really frustrating. The card works fine on other computers so does the microSD to SD attachment. I have done following o fix. - Updated Vista and installed SP1. - Updated the TI drivers for FlashDrive. - Checked Vaio site for updates (none required). - Added a new entry HKLM\SYSTEM\ControlS* et001\Services\tifm21\Parameters/SDParam=1 took the hint from (http://tinyurl.com/nk33tp) I have restarted the PC multiple times. As soon as I put the card in, the SD/MMC device icon blips, so it seems the hardware is at least detecting something. The card reader was working fine few days back. I guess some windows update has broken something, does any one have any idea on how to proceed. MY laptop is VGN-N365E.

  Read the article

• Bootable SD card still has small memory, even after formating

  - by Inazuma

  I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

  Read the article

• Do I have a bad SD card?

  - by User1

  I'm trying to copy data from my computer to an SD card. After a few hundred megs, I keep getting the following errors in dmesg: [34542.836192] end_request: I/O error, dev mmcblk0, sector 855936 [34542.836284] FAT: unable to read inode block for updating (i_pos 13694981) [34542.836306] MMC: killing requests for dead queue [34542.836310] end_request: I/O error, dev mmcblk0, sector 9280 [34542.837035] FAT: unable to read inode block for updating (i_pos 148486) [34542.837062] MMC: killing requests for dead queue [34542.837066] end_request: I/O error, dev mmcblk0, sector 1 [34542.837074] FAT: bread failed in fat_clusters_flush [34542.837085] MMC: killing requests for dead queue These were all files I copied from a smaller SD card. I just want to transfer them to my new, larger card for my phone. I tried the same experiment with different files on a different machine and the card failed again. Reading data from the old card went fine. My systems are older and the new SD card is new (16GB Class 4). Could this be that my computers are too old? Is there a definitive test to verify if my SD card is bad?

  Read the article

• Is there a way to disable specific Spybot Immunization rules?

  - by Iszi

  I've been having problems using a desktop sharing application, which I've traced to the Immunization protections applied via Spybot S&D. Specifically, the problem has been narrowed down to the rules in the \SOFTWARE (Plugins) categories under the Internet Explorer groups. Once I disable these Immunization categories, everything in the application works fine. Each of these categories appears to include ~900 protections on the system. I suspect that the root cause of my problems could be narrowed down to just one, or perhaps a handful, of the settings that get applied in these categories. However, I can't find any options in Spybot S&D which would allow me to drill down to the individual protection rules and choose which to enable or disable. Is there something I'm missing, or is this not a feature available via the GUI? If it's not strictly supported in the application, is there a way to work around it by manually editing some of its files or registry settings? Spybot S&D version: 2.2.21.0 Spybot Start Center version: 2.2.21.129 Windows Ultimate x64

  Read the article

• Operative systems on SD cards

  - by HisDudeness

  I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

  Read the article

• what appropriate "Allocation Unit Size" for an exFAT SD card with ReadyBoost

  - by Revolter

  I've brought an 4GB SD card and I'm dedicating it for use by ReadyBoost (on Windows7) Im looking to get the most profit on performance, so i've formatted it with exFAT (as recommended by Microsoft) but I have some doubts to define what best .Allocation Unit Size* I should choose. Since I can't get how ReadyBoost/SD card exactly read/seek the data, can someone tell what make choosing an Allocation Unit Size in favor of another for this scheme ? Apparently, ReadyBoost is allocating all the free space in SD card as one huge file, so a big Allocation Unit Size is advised for fastest reading time. I'm not confusing with ordinary HDD's ?

  Read the article

• Can I use a SD card as cache instead of a Solid State Drive

  - by user654628

  I just installed a solid state drive a few days ago and I have been reading about how to preserve the file of it. I am running Windows 8 and my SSD has 256G of storage. I am using a laptop and cannot carry an external hard drive connected to my laptop to hold cache, temp files etc. I was wondering if a SD card would work. So I would use the SD card to hold cache, temp files and maybe index files from Windows, would this work and be effective (since I believe sd cards will also wear out)?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >