Search Results

Search found 21 results on 1 pages for 'texel'.

Page 1/1 | 1 

  • Picture rendered from above and below using an Orthographic camera do not match

    - by Roy T.
    I'm using an orthographic camera to render slices of a model (in order to voxelize it). I render each slice both from above and below in order to determine what is inside each slice. I am using an orthographic camera The model I render is a simple 'T' shape constructed from two cubes. The cubes have the same dimensions and have the same Y (height) coordinate. See figure 1 for a render of it in Blender. I render this model once directly from above and once directly from below. My expectation was that I would get exactly the same image (except for mirroring over the y-axis). However when I render using a very low resolution render target (25x25) the position (in pixels) of the 'T' is different when rendered from above as opposed to rendered from below. See figure 2 and 3. The pink blocks are not part of the original rendering but I've added them so you can easily count/see the differences. Figure 2: the T rendered from above Figure 3: the T rendered from below This is probably due to what I've read about pixel and texel coordinates which might be biased to the top-left as seen from the camera. Since I'm using the same 'up' vector for both of my camera's my bias only shows on the x-axis. I've tried to change the position of the camera and it's look-at by, what I thought, should be half a pixel. I've tried both shifting a single camera and shifting both cameras and while I see some effect I am not able to get a pixel-by-pixel perfect copy from both camera's. Here I initialize the camera and compute, what I believe to be, half pixel. boundsDimX and boundsDimZ is a slightly enlarged bounding box around the model which I also use as the width and height of the view volume of the orthographic camera. Matrix projection = Matrix.CreateOrthographic(boundsDimX, boundsDimZ, 0.5f, sliceHeight + 0.5f); Vector3 halfPixel = new Vector3(boundsDimX / (float)renderTarget.Width, 0, boundsDimY / (float)renderTarget.Height) * 0.5f; This is the code where I set the camera position and camera look ats // Position camera if (downwards) { float cameraHeight = bounds.Max.Y + 0.501f - (sliceHeight * i); Vector3 cameraPosition = new Vector3 ( boundsCentre.X, // possibly adjust by half a pixel? cameraHeight, boundsCentre.Z ); camera.Position = cameraPosition; camera.LookAt = new Vector3(cameraPosition.X, cameraHeight - 1.0f, cameraPosition.Z); } else { float cameraHeight = bounds.Max.Y - 0.501f - (sliceHeight * i); Vector3 cameraPosition = new Vector3 ( boundsCentre.X, cameraHeight, boundsCentre.Z ); camera.Position = cameraPosition; camera.LookAt = new Vector3(cameraPosition.X, cameraHeight + 1.0f, cameraPosition.Z); } Main Question Now you've seen all the problems and code you can guess it. My main question is. How do I align both camera's so that they each render exactly the same image (mirrored along the Y axis)? Figure 1 the original model rendered in blender

    Read the article

  • GLSL point inside box test

    - by wcochran
    Below is a GLSL fragment shader that outputs a texel if the given texture coord is inside a box, otherwise a color is output. This just feels silly and the there must be a way to do this without branching? uniform sampler2D texUnit; varying vec4 color; varying vec2 texCoord; void main() { vec4 texel = texture2D(texUnit, texCoord); if (any(lessThan(texCoord, vec2(0.0, 0.0))) || any(greaterThan(texCoord, vec2(1.0, 1.0)))) gl_FragColor = color; else gl_FragColor = texel; } Below is a version without branching, but it still feels clumsy. What is the best practice for "texture coord clamping"? uniform sampler2D texUnit; varying vec4 color; varying vec4 labelColor; varying vec2 texCoord; void main() { vec4 texel = texture2D(texUnit, texCoord); bool outside = any(lessThan(texCoord, vec2(0.0, 0.0))) || any(greaterThan(texCoord, vec2(1.0, 1.0))); gl_FragColor = mix(texel*labelColor, color, vec4(outside,outside,outside,outside)); } I am clamping texels to the region with the label is -- the texture s & t coordinates will be between 0 and 1 in this case. Otherwise, I use a brown color where the label ain't. Note that I could also construct a branching version of the code that does not perform a texture lookup when it doesn't need to. Would this be faster than a non-branching version that always performed a texture lookup? Maybe time for some tests...

    Read the article

  • Efficiently rendering to 3D texture

    - by TravisG
    I have an existing depth texture and some other color textures, and want to process the information in them by rendering to a 3D texture (based on the depth contained in the depth texture, i.e. a point at (x/y) in the depth texture will be rendered to (x/y/texture(depth,uv)) in the 3D texture). Simply doing one manual draw call for each slice of the 3D texture (via glFramebufferTextureLayer) is terribly slow, since I don't know beforehand to what slice of the 3D texture a given texel from one of the color textures or the depth texture belongs. This means the entire process is effectively for each slice for each texel in depth texture process color textures and render to slice So I have to sample the depth texture completely per each slice, and I also have to go through the processing (at least until to discard;) for all texels in it. It would be much faster if I could rearrange the process to for each texel in depth texture figure out what slice it should end up in process color textures and render to slice Is this possible? If so, how? What I'm actually trying to do: the color textures contain lighting information (as seen from light view, it's a reflective shadow map). I want to accumulate that information in the 3D texture and then later use it to light the scene. More specifically I'm trying to implement Cryteks Light Propagation Volumes algorithm.

    Read the article

  • Common light map practices

    - by M. Utku ALTINKAYA
    My scene consists of individual meshes. At the moment each mesh has its associated light map texture, I was able to implement the light mapping using these many small textures. 1) Of course, I want to create an atlas, but how do you split atlases to pages, I mean do you group the lm's of objects that are close to each other, and load light maps on the fly if scene is expected to be big. 2) the 3d authoring software provides automatic uv coordinates for each mesh in the scene, but there are empty areas in the texel space, so if I scale the texture polygons the texel density of each face wil not match other meshes, if I create atlas like that there will be varying lm resolution, how do you solve this, just leave it as it is, or ignore resolution ? Actually these questions also applies to other non tiled maps.

    Read the article

  • How to remove seams from a tile map in 3D?

    - by Grimshaw
    I am using my OpenGL custom engine to render a tilemap made with Tiled, using a well spread tileset from the web. There is nothing fancy going on. I load the TMX file from Tiled and generate vertex arrays and index arrays to render the tilemap. I am rendering this tilemap as a wall in my 3D world, meaning that I move around with a fly camera in my 3D world and at Z=0 there is a plane showing me my tiles. Everything is working correctly but I get ugly seems between the tiles. I've tried orthographic and perspective cameras and with either I found particular sets of parameters for the projection and view matrices where the artifacts did not show, but otherwise they are there 99% of the time in multiple patterns, depending on the zoom and camera parameters like field of view. Here's a screenshot of the artifact being shown: http://i.imgur.com/HNV1g4M.png Here's the tileset I am using (which Tiled also uses and renders correctly): http://i.imgur.com/SjjHK4q.png My tileset has no mipmaps and is set to GL_NEAREST and GL_CLAMP_TO_EDGE values. I've looked around many articles in the internet and nothing helped. I tried uv correction so the uv fall at half of the texel, rather than the end of the texel to prevent interpolating with the neighbour value(which is transparency). I tried debugging with my geometry and I verified that with no texture and a random color in each tile, I don't seem to see any seams. All vertices have integer coordinates, i.e, the first tile is a quad from (0,0) to (1,1) and so on. Tried adding a little offset both to the UV and to the vertices to see if the gaps cease to exist. Disabled multisampling too. Nothing fixed it so far. Thanks.

    Read the article

  • Vertex buffer acting strange? [on hold]

    - by Ryan Capote
    I'm having a strange problem, and I don't know what could be causing it. My current code is identical to how I've done this before. I'm trying to render a rectangle using VBO and orthographic projection.   My results:     What I expect: 3x3 rectangle in the top left corner   #include <stdio.h> #include <GL\glew.h> #include <GLFW\glfw3.h> #include "lodepng.h"   static const int FALSE = 0; static const int TRUE = 1;   static const char* VERT_SHADER =     "#version 330\n"       "layout(location=0) in vec4 VertexPosition; "     "layout(location=1) in vec2 UV;"     "uniform mat4 uProjectionMatrix;"     /*"out vec2 TexCoords;"*/       "void main(void) {"     "    gl_Position = uProjectionMatrix*VertexPosition;"     /*"    TexCoords = UV;"*/     "}";   static const char* FRAG_SHADER =     "#version 330\n"       /*"uniform sampler2D uDiffuseTexture;"     "uniform vec4 uColor;"     "in vec2 TexCoords;"*/     "out vec4 FragColor;"       "void main(void) {"    /* "    vec4 texel = texture2D(uDiffuseTexture, TexCoords);"     "    if(texel.a <= 0) {"     "         discard;"     "    }"     "    FragColor = texel;"*/     "    FragColor = vec4(1.f);"     "}";   static int g_running; static GLFWwindow *gl_window; static float gl_projectionMatrix[16];   /*     Structures */ typedef struct _Vertex {     float x, y, z, w;     float u, v; } Vertex;   typedef struct _Position {     float x, y; } Position;   typedef struct _Bitmap {     unsigned char *pixels;     unsigned int width, height; } Bitmap;   typedef struct _Texture {     GLuint id;     unsigned int width, height; } Texture;   typedef struct _VertexBuffer {     GLuint bufferObj, vertexArray; } VertexBuffer;   typedef struct _ShaderProgram {     GLuint vertexShader, fragmentShader, program; } ShaderProgram;   /*   http://en.wikipedia.org/wiki/Orthographic_projection */ void createOrthoProjection(float *projection, float width, float height, float far, float near)  {       const float left = 0;     const float right = width;     const float top = 0;     const float bottom = height;          projection[0] = 2.f / (right - left);     projection[1] = 0.f;     projection[2] = 0.f;     projection[3] = -(right+left) / (right-left);     projection[4] = 0.f;     projection[5] = 2.f / (top - bottom);     projection[6] = 0.f;     projection[7] = -(top + bottom) / (top - bottom);     projection[8] = 0.f;     projection[9] = 0.f;     projection[10] = -2.f / (far-near);     projection[11] = (far+near)/(far-near);     projection[12] = 0.f;     projection[13] = 0.f;     projection[14] = 0.f;     projection[15] = 1.f; }   /*     Textures */ void loadBitmap(const char *filename, Bitmap *bitmap, int *success) {     int error = lodepng_decode32_file(&bitmap->pixels, &bitmap->width, &bitmap->height, filename);       if (error != 0) {         printf("Failed to load bitmap. ");         printf(lodepng_error_text(error));         success = FALSE;         return;     } }   void destroyBitmap(Bitmap *bitmap) {     free(bitmap->pixels); }   void createTexture(Texture *texture, const Bitmap *bitmap) {     texture->id = 0;     glGenTextures(1, &texture->id);     glBindTexture(GL_TEXTURE_2D, texture);       glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);       glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, bitmap->width, bitmap->height, 0,              GL_RGBA, GL_UNSIGNED_BYTE, bitmap->pixels);       glBindTexture(GL_TEXTURE_2D, 0); }   void destroyTexture(Texture *texture) {     glDeleteTextures(1, &texture->id);     texture->id = 0; }   /*     Vertex Buffer */ void createVertexBuffer(VertexBuffer *vertexBuffer, Vertex *vertices) {     glGenBuffers(1, &vertexBuffer->bufferObj);     glGenVertexArrays(1, &vertexBuffer->vertexArray);     glBindVertexArray(vertexBuffer->vertexArray);       glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer->bufferObj);     glBufferData(GL_ARRAY_BUFFER, sizeof(Vertex) * 6, (const GLvoid*)vertices, GL_STATIC_DRAW);       const unsigned int uvOffset = sizeof(float) * 4;       glVertexAttribPointer(0, 4, GL_FLOAT, GL_FALSE, sizeof(Vertex), 0);     glVertexAttribPointer(1, 2, GL_FLOAT, GL_FALSE, sizeof(Vertex), (GLvoid*)uvOffset);       glEnableVertexAttribArray(0);     glEnableVertexAttribArray(1);       glBindBuffer(GL_ARRAY_BUFFER, 0);     glBindVertexArray(0); }   void destroyVertexBuffer(VertexBuffer *vertexBuffer) {     glDeleteBuffers(1, &vertexBuffer->bufferObj);     glDeleteVertexArrays(1, &vertexBuffer->vertexArray); }   void bindVertexBuffer(VertexBuffer *vertexBuffer) {     glBindVertexArray(vertexBuffer->vertexArray);     glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer->bufferObj); }   void drawVertexBufferMode(GLenum mode) {     glDrawArrays(mode, 0, 6); }   void drawVertexBuffer() {     drawVertexBufferMode(GL_TRIANGLES); }   void unbindVertexBuffer() {     glBindVertexArray(0);     glBindBuffer(GL_ARRAY_BUFFER, 0); }   /*     Shaders */ void compileShader(ShaderProgram *shaderProgram, const char *vertexSrc, const char *fragSrc) {     GLenum err;     shaderProgram->vertexShader = glCreateShader(GL_VERTEX_SHADER);     shaderProgram->fragmentShader = glCreateShader(GL_FRAGMENT_SHADER);       if (shaderProgram->vertexShader == 0) {         printf("Failed to create vertex shader.");         return;     }       if (shaderProgram->fragmentShader == 0) {         printf("Failed to create fragment shader.");         return;     }       glShaderSource(shaderProgram->vertexShader, 1, &vertexSrc, NULL);     glCompileShader(shaderProgram->vertexShader);     glGetShaderiv(shaderProgram->vertexShader, GL_COMPILE_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to compile vertex shader.");         return;     }       glShaderSource(shaderProgram->fragmentShader, 1, &fragSrc, NULL);     glCompileShader(shaderProgram->fragmentShader);     glGetShaderiv(shaderProgram->fragmentShader, GL_COMPILE_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to compile fragment shader.");         return;     }       shaderProgram->program = glCreateProgram();     glAttachShader(shaderProgram->program, shaderProgram->vertexShader);     glAttachShader(shaderProgram->program, shaderProgram->fragmentShader);     glLinkProgram(shaderProgram->program);          glGetProgramiv(shaderProgram->program, GL_LINK_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to link shader.");         return;     } }   void destroyShader(ShaderProgram *shaderProgram) {     glDetachShader(shaderProgram->program, shaderProgram->vertexShader);     glDetachShader(shaderProgram->program, shaderProgram->fragmentShader);       glDeleteShader(shaderProgram->vertexShader);     glDeleteShader(shaderProgram->fragmentShader);       glDeleteProgram(shaderProgram->program); }   GLuint getUniformLocation(const char *name, ShaderProgram *program) {     GLuint result = 0;     result = glGetUniformLocation(program->program, name);       return result; }   void setUniformMatrix(float *matrix, const char *name, ShaderProgram *program) {     GLuint loc = getUniformLocation(name, program);       if (loc == -1) {         printf("Failed to get uniform location in setUniformMatrix.\n");         return;     }       glUniformMatrix4fv(loc, 1, GL_FALSE, matrix); }   /*     General functions */ static int isRunning() {     return g_running && !glfwWindowShouldClose(gl_window); }   static void initializeGLFW(GLFWwindow **window, int width, int height, int *success) {     if (!glfwInit()) {         printf("Failed it inialize GLFW.");         *success = FALSE;        return;     }          glfwWindowHint(GLFW_RESIZABLE, 0);     *window = glfwCreateWindow(width, height, "Alignments", NULL, NULL);          if (!*window) {         printf("Failed to create window.");         glfwTerminate();         *success = FALSE;         return;     }          glfwMakeContextCurrent(*window);       GLenum glewErr = glewInit();     if (glewErr != GLEW_OK) {         printf("Failed to initialize GLEW.");         printf(glewGetErrorString(glewErr));         *success = FALSE;         return;     }       glClearColor(0.f, 0.f, 0.f, 1.f);     glViewport(0, 0, width, height);     *success = TRUE; }   int main(int argc, char **argv) {          int err = FALSE;     initializeGLFW(&gl_window, 480, 320, &err);     glDisable(GL_DEPTH_TEST);     if (err == FALSE) {         return 1;     }          createOrthoProjection(gl_projectionMatrix, 480.f, 320.f, 0.f, 1.f);          g_running = TRUE;          ShaderProgram shader;     compileShader(&shader, VERT_SHADER, FRAG_SHADER);     glUseProgram(shader.program);     setUniformMatrix(&gl_projectionMatrix, "uProjectionMatrix", &shader);       Vertex rectangle[6];     VertexBuffer vbo;     rectangle[0] = (Vertex){0.f, 0.f, 0.f, 1.f, 0.f, 0.f}; // Top left     rectangle[1] = (Vertex){3.f, 0.f, 0.f, 1.f, 1.f, 0.f}; // Top right     rectangle[2] = (Vertex){0.f, 3.f, 0.f, 1.f, 0.f, 1.f}; // Bottom left     rectangle[3] = (Vertex){3.f, 0.f, 0.f, 1.f, 1.f, 0.f}; // Top left     rectangle[4] = (Vertex){0.f, 3.f, 0.f, 1.f, 0.f, 1.f}; // Bottom left     rectangle[5] = (Vertex){3.f, 3.f, 0.f, 1.f, 1.f, 1.f}; // Bottom right       createVertexBuffer(&vbo, &rectangle);            bindVertexBuffer(&vbo);          while (isRunning()) {         glClear(GL_COLOR_BUFFER_BIT);         glfwPollEvents();                    drawVertexBuffer();                    glfwSwapBuffers(gl_window);     }          unbindVertexBuffer(&vbo);       glUseProgram(0);     destroyShader(&shader);     destroyVertexBuffer(&vbo);     glfwTerminate();     return 0; }

    Read the article

  • First-Time GLSL Shadow Mapping Problems

    - by Locke
    I'm working on building out a 2.5D engine and having massive problems getting my shadows working. I'm at a point where I'm VERY close. So, let's see a picture to see what I have: As you can see above, the image has lighting -- but the shadow map is displaying incorrectly. The shadow map is shown in the bottom left hand side of the screen as a normal 2D texture, so we can see what it looks like at any given time. If you notice, it appears that the shadows are generating backwards in the wrong direction -- I think. But the problem is a little more deep -- I'm just plotting the shadow onto the screen, which I know is wrong -- I'm ignoring the actual test to see if we NEED to show a shadow. The incoming parameters all appear to be correct -- so there has to be something wrong with my shader code somewhere. Here's what my code looks like: VERTEX: uniform mat4 LightModelViewProjectionMatrix; varying vec3 Normal; // The eye-space normal of the current vertex. varying vec4 LightCoordinate; // The texture coordinate of the light of the current vertex. varying vec3 LightDirection; // The eye-space direction of the light. void main() { Normal = normalize(gl_NormalMatrix * gl_Normal); LightDirection = normalize(gl_NormalMatrix * gl_LightSource[0].position.xyz); LightCoordinate = LightModelViewProjectionMatrix * gl_Vertex; LightCoordinate.xy = ( LightCoordinate.xy * 0.5 ) + 0.5; gl_Position = ftransform(); gl_TexCoord[0] = gl_MultiTexCoord0; } FRAGMENT: uniform sampler2D DiffuseMap; uniform sampler2D ShadowMap; varying vec3 Normal; // The eye-space normal of the current vertex. varying vec4 LightCoordinate; // The texture coordinate of the light of the current vertex. varying vec3 LightDirection; // The eye-space direction of the light. void main() { vec4 Texel = texture2D(DiffuseMap, vec2(gl_TexCoord[0])); // Directional lighting //Build ambient lighting vec4 AmbientElement = gl_LightSource[0].ambient; //Build diffuse lighting float Lambert = max(dot(Normal, LightDirection), 0.0); //max(abs(dot(Normal, LightDirection)), 0.0); vec4 DiffuseElement = ( gl_LightSource[0].diffuse * Lambert ); vec4 LightingColor = ( DiffuseElement + AmbientElement ); LightingColor.r = min(LightingColor.r, 1.0); LightingColor.g = min(LightingColor.g, 1.0); LightingColor.b = min(LightingColor.b, 1.0); LightingColor.a = min(LightingColor.a, 1.0); LightingColor *= Texel; //Everything up to this point is PERFECT // Shadow mapping // ------------------------------ vec4 ShadowCoordinate = LightCoordinate / LightCoordinate.w; float DistanceFromLight = texture2D( ShadowMap, ShadowCoordinate.st ).z; float DepthBias = 0.001; float ShadowFactor = 1.0; if( LightCoordinate.w > 0.0 ) { ShadowFactor = DistanceFromLight < ( ShadowCoordinate.z + DepthBias ) ? 0.5 : 1.0; } LightingColor.rgb *= ShadowFactor; //gl_FragColor = LightingColor; //Yes, I know this is wrong, but the line above (gl_FragColor = LightingColor;) produces the wrong effect gl_FragColor = LightingColor * texture2D( ShadowMap, ShadowCoordinate.st ); } I wanted to make sure the coordinates were correct for the shadow map -- so that's why you see it applied to the image as it is below. But the depth for each point seems to be wrong -- the shadows SHOULD be opposite (look at how the image is -- the shaded areas from normal lighting are facing the opposite direction of the shadows). Maybe my matrices are bad or something going in? They're isolated and appear to be correct -- nothing else is going in unusual. When I view from the light's view and get the MVP matrices for it, they're correct. EDIT: Added an image so you can see what happens when I do the correct command at the end of the GLSL: That's the image when the last line is just glFragColor = LightingColor; Maybe someone has some idea of what I screwed up?

    Read the article

  • HLSL - How can I set sampler Min/Mag/Mip filters to disable all filtering/anti-aliasing?

    - by RJFalconer
    I have a tex2D sampler I want to only return precisely those colours that are present on my texture. In the event of a texel overlapping multiple colours, I want it to pick one and have the whole texel be that colour. I think to do this I want to disable mipmapping, or at least trilinear filtering of mips. sampler2D gColourmapSampler : register(s0) = sampler_state { Texture = <gColourmapTexture>; //Defined above MinFilter = None; //Controls sampling. None, Linear, or Point. MagFilter = None; //Controls sampling. None, Linear, or Point. MipFilter = None; //Controls how the mips are generated. None, Linear, or Point. //... }; My problem is I don't really understand Min/Mag/Mip filtering, so am not sure what combination I need to set these in, or if this is even what I am after. MSDN has this to say; D3DSAMP_MAGFILTER: Magnification filter of type D3DTEXTUREFILTERTYPE D3DSAMP_MINFILTER: Minification filter of type D3DTEXTUREFILTERTYPE. D3DSAMP_MIPFILTER: Mipmap filter to use during minification. See D3DTEXTUREFILTERTYPE. D3DTEXF_NONE: When used with D3DSAMP_MIPFILTER, disables mipmapping.

    Read the article

  • Fragment shaders on a texture

    - by Snowangelic
    Hello stack overflow. I am trying to add some post-processing capabilities to a program. The rendering is done using openGL. I just want to allow the program to load some home made fragment shader and use them on the video stream. I wrote a little piece of shader using "OpenGL Shader Builder" that just turns a texture in grayscale. The shaders works well in the shader builder but I can't make it work in the main program. The screens stays all black. Here is the setup : @implementation PluginGLView - (id) initWithCoder: (NSCoder *) coder { const GLubyte * strExt; if ((self = [super initWithCoder:coder]) == nil) return nil; glLock = [[NSLock alloc] init]; if (nil == glLock) { [self release]; return nil; } // Init pixel format attribs NSOpenGLPixelFormatAttribute attrs[] = { NSOpenGLPFAAccelerated, NSOpenGLPFANoRecovery, NSOpenGLPFADoubleBuffer, 0 }; // Get pixel format from OpenGL NSOpenGLPixelFormat* pixFmt = [[NSOpenGLPixelFormat alloc] initWithAttributes:attrs]; if (!pixFmt) { NSLog(@"No Accelerated OpenGL pixel format found\n"); NSOpenGLPixelFormatAttribute attrs2[] = { NSOpenGLPFANoRecovery, 0 }; // Get pixel format from OpenGL pixFmt = [[NSOpenGLPixelFormat alloc] initWithAttributes:attrs2]; if (!pixFmt) { NSLog(@"No OpenGL pixel format found!\n"); [self release]; return nil; } } [self setPixelFormat:[pixFmt autorelease]]; /* long swapInterval = 1 ; [[self openGLContext] setValues:&swapInterval forParameter:NSOpenGLCPSwapInterval]; */ [glLock lock]; [[self openGLContext] makeCurrentContext]; // Init object members strExt = glGetString (GL_EXTENSIONS); texture_range = gluCheckExtension ((const unsigned char *)"GL_APPLE_texture_range", strExt) ? GL_TRUE : GL_FALSE; texture_hint = GL_STORAGE_SHARED_APPLE ; client_storage = gluCheckExtension ((const unsigned char *)"GL_APPLE_client_storage", strExt) ? GL_TRUE : GL_FALSE; rect_texture = gluCheckExtension((const unsigned char *)"GL_EXT_texture_rectangle", strExt) ? GL_TRUE : GL_FALSE; // Setup some basic OpenGL stuff glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE); glColor4f(1.0f, 1.0f, 1.0f, 1.0f); glClearColor(0.0f, 0.0f, 0.0f, 1.0f); glClear(GL_COLOR_BUFFER_BIT); // Loads the shaders shader=LoadShader(GL_FRAGMENT_SHADER,"/Users/alexandremathieu/fragment.fs"); program=glCreateProgram(); glAttachShader(program, shader); glLinkProgram(program); glUseProgram(program); [NSOpenGLContext clearCurrentContext]; [glLock unlock]; image_width = 1024; image_height = 512; image_depth = 16; image_type = GL_UNSIGNED_SHORT_1_5_5_5_REV; image_base = (GLubyte *) calloc(((IMAGE_COUNT * image_width * image_height) / 3) * 4, image_depth >> 3); if (image_base == nil) { [self release]; return nil; } // Create and load textures for the first time [self loadTextures:GL_TRUE]; // Init fps timer //gettimeofday(&cycle_time, NULL); drawBG = YES; // Call for a redisplay noDisplay = YES; PSXDisplay.Disabled = 1; [self setNeedsDisplay:true]; return self; } And here is the "render screen" function wich basically...renders the screen. - (void)renderScreen { int bufferIndex = whichImage; glBindTexture(GL_TEXTURE_RECTANGLE_EXT, bufferIndex+1); glUseProgram(program); int loc=glGetUniformLocation(program, "texture"); glUniform1i(loc,bufferIndex+1); glTexSubImage2D(GL_TEXTURE_RECTANGLE_EXT, 0, 0, 0, image_width, image_height, GL_BGRA, image_type, image[bufferIndex]); glBegin(GL_QUADS); glTexCoord2f(0.0f, 0.0f); glVertex2f(-1.0f, 1.0f); glTexCoord2f(0.0f, image_height); glVertex2f(-1.0f, -1.0f); glTexCoord2f(image_width, image_height); glVertex2f(1.0f, -1.0f); glTexCoord2f(image_width, 0.0f); glVertex2f(1.0f, 1.0f); glEnd(); [[self openGLContext] flushBuffer]; [NSOpenGLContext clearCurrentContext]; //[glLock unlock]; } and finally here's the shader. uniform sampler2DRect texture; void main() { vec4 color, texel; color = gl_Color; texel = texture2DRect(texture, gl_TexCoord[0].xy); color *= texel; // Begin Shader float gray=0.0; gray+=(color.r + color.g + color.b)/3.0; color=vec4(gray,gray,gray,color.a); // End Shader gl_FragColor = color; } The loading and using of shaders works since I am able to turn the screen all red with this shader void main(){ gl_FragColor=vec4(1.0,0.0,0.0,1.0); } If the shader contains a syntax error I get an error message from the LoadShader function etc. If I remove the use of the shader, everything works normally. I think the problem comes from the "passing the texture as a uniform parameter" thing. But these are my very firsts step with openGL and I cant be sure of anything. Don't hesitate to ask for more info. Thank you Stack O.

    Read the article

  • Normals vs Normal maps

    - by KaiserJohaan
    I am using Assimp asset importer (http://assimp.sourceforge.net/lib_html/index.html) to parse 3d models. So far, I've simply pulled out the normal vectors which are defined for each vertex in my meshes. Yet I have also found various tutorials on normal maps... As I understand it for normal maps, the normal vectors are stored in each texel of a normal map, and you pull these out of the normal texture in the shader. Why is there two ways to get the normals, which one is considered best-practice and why?

    Read the article

  • Spherical harmonics lighting interpolation

    - by TravisG
    I want to use hardware filtering to smooth out colors in texels of a texture when I'm accessing texels at coordinates that are not directly at the center of the texel, the catch being that the texels store 2 bands of spherical harmonics coefficients (=4 coefficients), not RGBA intensity values. Can I just use hardware filtering like that (GL_LINEAR with and without mip mapping) without any considerations? In other terms: If I were to first convert the coefficients back to intensity representations, than manually interpolate between two intensities, would the resulting intensity be the same as if I interpolated between the coefficient vectors directly and then converted the interpolated result to intensities?

    Read the article

  • Deferred rendering with VSM - Scaling light depth loses moments

    - by user1423893
    I'm calculating my shadow term using a VSM method. This works correctly when using forward rendered lights but fails with deferred lights. // Shadow term (1 = no shadow) float shadow = 1; // [Light Space -> Shadow Map Space] // Transform the surface into light space and project // NB: Could be done in the vertex shader, but doing it here keeps the // "light shader" abstraction and doesn't limit the number of shadowed lights float4x4 LightViewProjection = mul(LightView, LightProjection); float4 surf_tex = mul(position, LightViewProjection); // Re-homogenize // 'w' component is not used in later calculations so no need to homogenize (it will equal '1' if homogenized) surf_tex.xyz /= surf_tex.w; // Rescale viewport to be [0,1] (texture coordinate system) float2 shadow_tex; shadow_tex.x = surf_tex.x * 0.5f + 0.5f; shadow_tex.y = -surf_tex.y * 0.5f + 0.5f; // Half texel offset //shadow_tex += (0.5 / 512); // Scaled distance to light (instead of 'surf_tex.z') float rescaled_dist_to_light = dist_to_light / LightAttenuation.y; //float rescaled_dist_to_light = surf_tex.z; // [Variance Shadow Map Depth Calculation] // No filtering float2 moments = tex2D(ShadowSampler, shadow_tex).xy; // Flip the moments values to bring them back to their original values moments.x = 1.0 - moments.x; moments.y = 1.0 - moments.y; // Compute variance float E_x2 = moments.y; float Ex_2 = moments.x * moments.x; float variance = E_x2 - Ex_2; variance = max(variance, Bias.y); // Surface is fully lit if the current pixel is before the light occluder (lit_factor == 1) // One-tailed inequality valid if float lit_factor = (rescaled_dist_to_light <= moments.x - Bias.x); // Compute probabilistic upper bound (mean distance) float m_d = moments.x - rescaled_dist_to_light; // Chebychev's inequality float p = variance / (variance + m_d * m_d); p = ReduceLightBleeding(p, Bias.z); // Adjust the light color based on the shadow attenuation shadow *= max(lit_factor, p); This is what I know for certain so far: The lighting is correct if I do not try and calculate the shadow term. (No shadows) The shadow term is correct when calculated using forward rendered lighting. (VSM works with forward rendered lights) With the current rescaled light distance (lightAttenuation.y is the far plane value): float rescaled_dist_to_light = dist_to_light / LightAttenuation.y; The light is correct and the shadow appears to be zoomed in and misses the blurring: When I do not rescale the light and use the homogenized 'surf_tex': float rescaled_dist_to_light = surf_tex.z; the shadows are blurred correctly but the lighting is incorrect and the cube model is no longer lit Why is scaling by the far plane value (LightAttenuation.y) zooming in too far? The only other factor involved is my world pixel position, which is calculated as follows: // [Position] float4 position; // [Screen Position] position.xy = input.PositionClone.xy; // Use 'x' and 'y' components already homogenized for uv coordinates above position.z = tex2D(DepthSampler, texCoord).r; // No need to homogenize 'z' component position.z = 1.0 - position.z; position.w = 1.0; // 1.0 = position.w / position.w // [World Position] position = mul(position, CameraViewProjectionInverse); // Re-homogenize position (xyz AND w, otherwise shadows will bend when camera is close) position.xyz /= position.w; position.w = 1.0; Using the inverse matrix of the camera's view x projection matrix does work for lighting but maybe it is incorrect for shadow calculation? EDIT: Light calculations for shadow including 'dist_to_light' // Work out the light position and direction in world space float3 light_position = float3(LightViewInverse._41, LightViewInverse._42, LightViewInverse._43); // Direction might need to be negated float3 light_direction = float3(-LightViewInverse._31, -LightViewInverse._32, -LightViewInverse._33); // Unnormalized light vector float3 dir_to_light = light_position - position; // Direction from vertex float dist_to_light = length(dir_to_light); // Normalise 'toLight' vector for lighting calculations dir_to_light = normalize(dir_to_light); EDIT2: These are the calculations for the moments (depth) //============================================= //---[Vertex Shaders]-------------------------- //============================================= DepthVSOutput depth_VS( float4 Position : POSITION, uniform float4x4 shadow_view, uniform float4x4 shadow_view_projection) { DepthVSOutput output = (DepthVSOutput)0; // First transform position into world space float4 position_world = mul(Position, World); output.position_screen = mul(position_world, shadow_view_projection); output.light_vec = mul(position_world, shadow_view).xyz; return output; } //============================================= //---[Pixel Shaders]--------------------------- //============================================= DepthPSOutput depth_PS(DepthVSOutput input) { DepthPSOutput output = (DepthPSOutput)0; // Work out the depth of this fragment from the light, normalized to [0, 1] float2 depth; depth.x = length(input.light_vec) / FarPlane; depth.y = depth.x * depth.x; // Flip depth values to avoid floating point inaccuracies depth.x = 1.0f - depth.x; depth.y = 1.0f - depth.y; output.depth = depth.xyxy; return output; } EDIT 3: I have tried the folloiwng: float4 pp; pp.xy = input.PositionClone.xy; // Use 'x' and 'y' components already homogenized for uv coordinates above pp.z = tex2D(DepthSampler, texCoord).r; // No need to homogenize 'z' component pp.z = 1.0 - pp.z; pp.w = 1.0; // 1.0 = position.w / position.w // Determine the depth of the pixel with respect to the light float4x4 LightViewProjection = mul(LightView, LightProjection); float4x4 matViewToLightViewProj = mul(CameraViewProjectionInverse, LightViewProjection); float4 vPositionLightCS = mul(pp, matViewToLightViewProj); float fLightDepth = vPositionLightCS.z / vPositionLightCS.w; // Transform from light space to shadow map texture space. float2 vShadowTexCoord = 0.5 * vPositionLightCS.xy / vPositionLightCS.w + float2(0.5f, 0.5f); vShadowTexCoord.y = 1.0f - vShadowTexCoord.y; // Offset the coordinate by half a texel so we sample it correctly vShadowTexCoord += (0.5f / 512); //g_vShadowMapSize This suffers the same problem as the second picture. I have tried storing the depth based on the view x projection matrix: output.position_screen = mul(position_world, shadow_view_projection); //output.light_vec = mul(position_world, shadow_view); output.light_vec = output.position_screen; depth.x = input.light_vec.z / input.light_vec.w; This gives a shadow that has lots surface acne due to horrible floating point precision errors. Everything is lit correctly though. EDIT 4: Found an OpenGL based tutorial here I have followed it to the letter and it would seem that the uv coordinates for looking up the shadow map are incorrect. The source uses a scaled matrix to get the uv coordinates for the shadow map sampler /// <summary> /// The scale matrix is used to push the projected vertex into the 0.0 - 1.0 region. /// Similar in role to a * 0.5 + 0.5, where -1.0 < a < 1.0. /// <summary> const float4x4 ScaleMatrix = float4x4 ( 0.5, 0.0, 0.0, 0.0, 0.0, -0.5, 0.0, 0.0, 0.0, 0.0, 0.5, 0.0, 0.5, 0.5, 0.5, 1.0 ); I had to negate the 0.5 for the y scaling (M22) in order for it to work but the shadowing is still not correct. Is this really the correct way to scale? float2 shadow_tex; shadow_tex.x = surf_tex.x * 0.5f + 0.5f; shadow_tex.y = surf_tex.y * -0.5f + 0.5f; The depth calculations are exactly the same as the source code yet they still do not work, which makes me believe something about the uv calculation above is incorrect.

    Read the article

  • GLSL, is it possible to offsetting vertices based on height map colour?

    - by Rob
    I am attempting to generate some terrain based upon a heightmap. I have generated a 32 x 32 grid and a corresponding height map - In my vertex shader I am trying to offset the position of the Y axis based upon the colour of the heightmap, white vertices being higher than black ones. //Vertex Shader Code #version 330 uniform mat4 modelMatrix; uniform mat4 viewMatrix; uniform mat4 projectionMatrix; uniform sampler2D heightmap; layout (location=0) in vec4 vertexPos; layout (location=1) in vec4 vertexColour; layout (location=3) in vec2 vertexTextureCoord; layout (location=4) in float offset; out vec4 fragCol; out vec4 fragPos; out vec2 fragTex; void main() { // Retreive the current pixel's colour vec4 hmColour = texture(heightmap,vertexTextureCoord); // Offset the y position by the value of current texel's colour value ? vec4 offset = vec4(vertexPos.x , vertexPos.y + hmColour.r, vertexPos.z , 1.0); // Final Position gl_Position = projectionMatrix * viewMatrix * modelMatrix * offset; // Data sent to Fragment Shader. fragCol = vertexColour; fragPos = vertexPos; fragTex = vertexTextureCoord; } However the code I have produced only creates a grid with none of the y vertices higher than any others.

    Read the article

  • Blur gets displaced compared to original image

    - by user1294203
    I have implemented a SSAO and I'm using a blur step to smooth it out. The problem is that the blurred texture is slightly displaced compared to the original. I'm blurring using a 4x4 kernel since that was my noise kernel in SSAO. The following is the blurring shader: float result = 0.0; for(int i = 0; i < 4; i++){ for(int j = 0; j < 4; j++){ vec2 offset = vec2(TEXEL_SIZE.x * i, TEXEL_SIZE.y * j); result += texture(aoSampler, TexCoord + offset).r; } } out_AO = vec4(vec3(0.0), result * 0.0625); Where TEXEL_SIZE is one over my window resolution. I was thinking that this is was an error based on how OpenGL counts the Texel center, so I tried displacing the texture coordinate I was using by 0.5 * TEXEL_SIZE, but there was still a slight displacement. The texture input to my blur shader, has wrap parameters: glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); When I tell the blur shader to just output the the value of the pixel, the result is not displaced, so it must have something to do with how neighboring pixels are sampled. Any thoughts?

    Read the article

  • Better solution for boolean mixing?

    - by Ruben Nunez
    Sorry if this question has been asked in the past, but searching Google and here didn't yield relevant results, so here goes. I'm working on a fragment shader that implements both conditional/boolean diffuse and bump mapping (that is to say, you don't need a diffuse texture or a normals texture, and if they're not present, they're simply changed to default values). My current solution is to use a uniform float to say "mix amount". For example, computing the diffuse texel works as: // Compute diffuse amount scaled by vCol // If no texture is present (mDif = 0.0), then DiffuseTexel = vCol // kT[0] is the diffuse texture // vTex is the texture co-ordinates // mDif is the uniform float containing the mix amount (either 0.0 or 1.0) vec4 DiffuseTexel = vCol*mix(vec4(1.0), texture2D(kT[0], vTex), mDif); While that works great and all, I was wondering if there's a better way of doing this, as I will never have any use for in-between values for funky effects. I know that perhaps the best solution is to simply write separate shaders for mDif=0.0 and mDif=1.0, but I'd like a more elegant solution than splicing shaders before compiling or writing multiple shader files and keeping each one updated. Any ideas are greatly appreciated. =)

    Read the article

  • problems texture mapping in modern OpenGL 3.3 using GLSL #version 150

    - by RubyKing
    Hi all I'm trying to do texture mapping using Modern OpenGL and GLSL 150. The problem is the texture shows but has this weird flicker I can show a video here http://www.youtube.com/watch?v=xbzw_LMxlHw and I have everything setup best I can have my texcords in my vertex array sent up to opengl I have my fragment color set to the texture values and texel values I have my vertex sending the textures cords to texture cordinates to be used in the fragment shader I have my ins and outs setup and I still don't know what I'm missing that could be causing that flicker. here is my code FRAGMENT SHADER #version 150 uniform sampler2D texture; in vec2 texture_coord; varying vec3 texture_coordinate; void main(void){ gl_FragColor = texture(texture, texture_coord); } VERTEX SHADER #version 150 in vec4 position; out vec2 texture_coordinate; out vec2 texture_coord; uniform vec3 translations; void main() { texture_coord = (texture_coordinate); gl_Position = vec4(position.xyz + translations.xyz, 1.0); } Last bit here is my vertex array with texture cordinates GLfloat vVerts[] = { 0.5f, 0.5f, 0.0f, 0.0f, 1.0f , 0.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.5f, 0.0f, 0.0f, 1.0f, 0.0f}; //tex x and y HERE IS THE ACTUAL FULL SOURCE CODE if you need to see all the code in its fullest glory here is a link to every file http://ideone.com/7kQN3 thank you for your help

    Read the article

  • Proper way to do texture mapping in modern OpenGL?

    - by RubyKing
    I'm trying to do texture mapping using OpenGL 3.3 and GLSL 150. The problem is the texture shows but has this weird flicker I can show a video here. My texcords are in a vertex array. I have my fragment color set to the texture values and texel values. I have my vertex shader sending the texture cords to texture cordinates to be used in the fragment shader. I have my ins and outs setup and I still don't know what I'm missing that could be causing that flicker. Here is my code: Fragment shader #version 150 uniform sampler2D texture; in vec2 texture_coord; varying vec3 texture_coordinate; void main(void) { gl_FragColor = texture(texture, texture_coord); } Vertex shader #version 150 in vec4 position; out vec2 texture_coordinate; out vec2 texture_coord; uniform vec3 translations; void main() { texture_coord = (texture_coordinate); gl_Position = vec4(position.xyz + translations.xyz, 1.0); } Last bit Here is my vertex array with texture coordinates: GLfloat vVerts[] = { 0.5f, 0.5f, 0.0f, 0.0f, 1.0f, 0.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.5f, 0.0f, 0.0f, 1.0f, 0.0f}; //tex x and y If you need to see all the code, here is a link to every file. Thank you for your help.

    Read the article

  • How can I encode four unsigned bytes (0-255) to a float and back again using HLSL?

    - by Statement
    Hello! I am facing a task where one of my hlsl shaders require multiple texture lookups per pixel. My 2d textures are fixed to 256*256, so two bytes should be sufficient to address any given texel given this constraint. My idea is then to put two xy-coordinates in each float, giving me eight xy-coordinates in pixel space when packed in a Vector4 format image. These eight coordinates are then used to sample another texture(s). The reason for doing this is to save graphics memory and an attempt to optimize processing time, since then I don't require multiple texture lookups. By the way: Does anyone know if encoding/decoding 16 bytes from/to 4 floats using 1 sampling is slower than 4 samplings with unencoded data?

    Read the article

  • In GLSL is it possible to offset vertices based on height map colour?

    - by Rob
    I am attempting to generate some terrain based upon a heightmap. I have generated a 32 x 32 grid and a corresponding height map - In my vertex shader I am trying to offset the position of the Y axis based upon the colour of the heightmap, white vertices being higher than black ones. //Vertex Shader Code #version 330 uniform mat4 modelMatrix; uniform mat4 viewMatrix; uniform mat4 projectionMatrix; uniform sampler2D heightmap; layout (location=0) in vec4 vertexPos; layout (location=1) in vec4 vertexColour; layout (location=3) in vec2 vertexTextureCoord; layout (location=4) in float offset; out vec4 fragCol; out vec4 fragPos; out vec2 fragTex; void main() { // Retreive the current pixel's colour vec4 hmColour = texture(heightmap,vertexTextureCoord); // Offset the y position by the value of current texel's colour value ? vec4 offset = vec4(vertexPos.x , vertexPos.y + hmColour.r, vertexPos.z , 1.0); // Final Position gl_Position = projectionMatrix * viewMatrix * modelMatrix * offset; // Data sent to Fragment Shader. fragCol = vertexColour; fragPos = vertexPos; fragTex = vertexTextureCoord; } However the code I have produced only creates a grid with none of the y vertices higher than any others. This is the C++ code that generates the grid and texture co-orientates which I believe to be correct as the texture is mapped to the grid, hence the white blob in the middle. The grid-lines are generated in the fragment shader, sorry for any confusion. I have tried multiplying the r value of hmColour by 1000 unfortunately that had no effect. The only other problem it could be is that the texture coordinate data is incorrect ? for (int z = 0; z < MAP_Z ; z++) { for(int x = 0; x < MAP_X ; x++) { //Generate Vertex Buffer vertexData[iVertex++] = float (x) * MAP_X; vertexData[iVertex++] = 0; vertexData[iVertex++] = -(float) (z) * MAP_Z; //Colour Buffer NOT NEEDED colourData[iColour++] = 255.0f; // R colourData[iColour++] = 1.0f; // G colourData[iColour++] = 0.0f; // B //Texture Buffer textureData[iTexture++] = (float ) x * (1.0f / MAP_X); textureData[iTexture++] = (float ) z * (1.0f / MAP_Z); } } The heightmap texture I am trying to use appears like so (without grid-lines). This is the corresponding fragment shader // Fragment Shader Code #version 330 uniform sampler2D hmTexture; layout (location=0) out vec4 fragColour; in vec2 fragTex; in vec4 pos; void main(void) { vec2 line = fragTex * 32; // Without Gridlines fragColour = texture(hmTexture,fragTex); // With grid lines // + mix(vec4(0.0, 0.0, 1.0, 0.0), vec4(1.0, 1.0, 1.0, 1.0), // smoothstep(0.05,fract(line.y), 0.99) * smoothstep(0.05,fract(line.x),0.99)); }

    Read the article

  • Shadows shimmer when camera moves

    - by Chad Layton
    I've implemented shadow maps in my simple block engine as an exercise. I'm using one directional light and using the view volume to create the shadow matrices. I'm experiencing some problems with the shadows shimmering when the camera moves and I'd like to know if it's an issue with my implementation or just an issue with basic/naive shadow mapping itself. Here's a video: http://www.youtube.com/watch?v=vyprATt5BBg&feature=youtu.be Here's the code I use to create the shadow matrices. The commented out code is my original attempt to perfectly fit the view frustum. You can also see my attempt to try clamping movement to texels in the shadow map which didn't seem to make any difference. Then I tried using a bounding sphere instead, also to no apparent effect. public void CreateViewProjectionTransformsToFit(Camera camera, out Matrix viewTransform, out Matrix projectionTransform, out Vector3 position) { BoundingSphere cameraViewFrustumBoundingSphere = BoundingSphere.CreateFromFrustum(camera.ViewFrustum); float lightNearPlaneDistance = 1.0f; Vector3 lookAt = cameraViewFrustumBoundingSphere.Center; float distanceFromLookAt = cameraViewFrustumBoundingSphere.Radius + lightNearPlaneDistance; Vector3 directionFromLookAt = -Direction * distanceFromLookAt; position = lookAt + directionFromLookAt; viewTransform = Matrix.CreateLookAt(position, lookAt, Vector3.Up); float lightFarPlaneDistance = distanceFromLookAt + cameraViewFrustumBoundingSphere.Radius; float diameter = cameraViewFrustumBoundingSphere.Radius * 2.0f; Matrix.CreateOrthographic(diameter, diameter, lightNearPlaneDistance, lightFarPlaneDistance, out projectionTransform); //Vector3 cameraViewFrustumCentroid = camera.ViewFrustum.GetCentroid(); //position = cameraViewFrustumCentroid - (Direction * (camera.FarPlaneDistance - camera.NearPlaneDistance)); //viewTransform = Matrix.CreateLookAt(position, cameraViewFrustumCentroid, Up); //Vector3[] cameraViewFrustumCornersWS = camera.ViewFrustum.GetCorners(); //Vector3[] cameraViewFrustumCornersLS = new Vector3[8]; //Vector3.Transform(cameraViewFrustumCornersWS, ref viewTransform, cameraViewFrustumCornersLS); //Vector3 min = cameraViewFrustumCornersLS[0]; //Vector3 max = cameraViewFrustumCornersLS[0]; //for (int i = 1; i < 8; i++) //{ // min = Vector3.Min(min, cameraViewFrustumCornersLS[i]); // max = Vector3.Max(max, cameraViewFrustumCornersLS[i]); //} //// Clamp to nearest texel //float texelSize = 1.0f / Renderer.ShadowMapSize; //min.X -= min.X % texelSize; //min.Y -= min.Y % texelSize; //min.Z -= min.Z % texelSize; //max.X -= max.X % texelSize; //max.Y -= max.Y % texelSize; //max.Z -= max.Z % texelSize; //// We just use an orthographic projection matrix. The sun is so far away that it's rays are essentially parallel. //Matrix.CreateOrthographicOffCenter(min.X, max.X, min.Y, max.Y, -max.Z, -min.Z, out projectionTransform); } And here's the relevant part of the shader: if (CastShadows) { float4 positionLightCS = mul(float4(position, 1.0f), LightViewProj); float2 texCoord = clipSpaceToScreen(positionLightCS) + 0.5f / ShadowMapSize; float shadowMapDepth = tex2D(ShadowMapSampler, texCoord).r; float distanceToLight = length(LightPosition - position); float bias = 0.2f; if (shadowMapDepth < (distanceToLight - bias)) { return float4(0.0f, 0.0f, 0.0f, 0.0f); } } The shimmer is slightly better if I drastically reduce the view volume but I think that's mostly just because the texels become smaller and it's harder to notice them flickering back and forth. I'd appreciate any insight, I'd very much like to understand what's going on before I try other techniques.

    Read the article

  • My raycaster is putting out strange results, how do I fix it?

    - by JamesK89
    I'm working on a raycaster in ActionScript 3.0 for the fun of it, and as a learning experience. I've got it up and running and its displaying me output as expected however I'm getting this strange bug where rays go through corners of blocks and the edges of blocks appear through walls. Maybe somebody with more experience can point out what I'm doing wrong or maybe a fresh pair of eyes can spot a tiny bug I haven't noticed. Thank you so much for your help! Screenshots: http://i55.tinypic.com/25koebm.jpg http://i51.tinypic.com/zx5jq9.jpg Relevant code: function drawScene() { rays.graphics.clear(); rays.graphics.lineStyle(1, rgba(0x00,0x66,0x00)); var halfFov = (player.fov/2); var numRays:int = ( stage.stageWidth / COLUMN_SIZE ); var prjDist = ( stage.stageWidth / 2 ) / Math.tan(toRad( halfFov )); var angStep = ( player.fov / numRays ); for( var i:int = 0; i < numRays; i++ ) { var rAng = ( ( player.angle - halfFov ) + ( angStep * i ) ) % 360; if( rAng < 0 ) rAng += 360; var ray:Object = castRay(player.position, rAng); drawRaySlice(i*COLUMN_SIZE, prjDist, player.angle, ray); } } function drawRaySlice(sx:int, prjDist, angle, ray:Object) { if( ray.distance >= MAX_DIST ) return; var height:int = int(( TILE_SIZE / (ray.distance * Math.cos(toRad(angle-ray.angle))) ) * prjDist); if( !height ) return; var yTop = int(( stage.stageHeight / 2 ) - ( height / 2 )); if( yTop < 0 ) yTop = 0; var yBot = int(( stage.stageHeight / 2 ) + ( height / 2 )); if( yBot > stage.stageHeight ) yBot = stage.stageHeight; rays.graphics.moveTo( (ray.origin.x / TILE_SIZE) * MINI_SIZE, (ray.origin.y / TILE_SIZE) * MINI_SIZE ); rays.graphics.lineTo( (ray.hit.x / TILE_SIZE) * MINI_SIZE, (ray.hit.y / TILE_SIZE) * MINI_SIZE ); for( var x:int = 0; x < COLUMN_SIZE; x++ ) { for( var y:int = yTop; y < yBot; y++ ) { buffer.setPixel(sx+x, y, clrTable[ray.tile-1] >> ( ray.horz ? 1 : 0 )); } } } function castRay(origin:Point, angle):Object { // Return values var rTexel = 0; var rHorz = false; var rTile = 0; var rDist = MAX_DIST + 1; var rMap:Point = new Point(); var rHit:Point = new Point(); // Ray angle and slope var ra = toRad(angle) % ANGLE_360; if( ra < ANGLE_0 ) ra += ANGLE_360; var rs = Math.tan(ra); var rUp = ( ra > ANGLE_0 && ra < ANGLE_180 ); var rRight = ( ra < ANGLE_90 || ra > ANGLE_270 ); // Ray position var rx = 0; var ry = 0; // Ray step values var xa = 0; var ya = 0; // Ray position, in map coordinates var mx:int = 0; var my:int = 0; var mt:int = 0; // Distance var dx = 0; var dy = 0; var ds = MAX_DIST + 1; // Horizontal intersection if( ra != ANGLE_180 && ra != ANGLE_0 && ra != ANGLE_360 ) { ya = ( rUp ? TILE_SIZE : -TILE_SIZE ); xa = ya / rs; ry = int( origin.y / TILE_SIZE ) * ( TILE_SIZE ) + ( rUp ? TILE_SIZE : -1 ); rx = origin.x + ( ry - origin.y ) / rs; mx = 0; my = 0; while( mx >= 0 && my >= 0 && mx < world.size.x && my < world.size.y ) { mx = int( rx / TILE_SIZE ); my = int( ry / TILE_SIZE ); mt = getMapTile(mx,my); if( mt > 0 && mt < 9 ) { dx = rx - origin.x; dy = ry - origin.y; ds = ( dx * dx ) + ( dy * dy ); if( rDist >= MAX_DIST || ds < rDist ) { rDist = ds; rTile = mt; rMap.x = mx; rMap.y = my; rHit.x = rx; rHit.y = ry; rHorz = true; rTexel = int(rx % TILE_SIZE) } break; } rx += xa; ry += ya; } } // Vertical intersection if( ra != ANGLE_90 && ra != ANGLE_270 ) { xa = ( rRight ? TILE_SIZE : -TILE_SIZE ); ya = xa * rs; rx = int( origin.x / TILE_SIZE ) * ( TILE_SIZE ) + ( rRight ? TILE_SIZE : -1 ); ry = origin.y + ( rx - origin.x ) * rs; mx = 0; my = 0; while( mx >= 0 && my >= 0 && mx < world.size.x && my < world.size.y ) { mx = int( rx / TILE_SIZE ); my = int( ry / TILE_SIZE ); mt = getMapTile(mx,my); if( mt > 0 && mt < 9 ) { dx = rx - origin.x; dy = ry - origin.y; ds = ( dx * dx ) + ( dy * dy ); if( rDist >= MAX_DIST || ds < rDist ) { rDist = ds; rTile = mt; rMap.x = mx; rMap.y = my; rHit.x = rx; rHit.y = ry; rHorz = false; rTexel = int(ry % TILE_SIZE); } break; } rx += xa; ry += ya; } } return { angle: angle, distance: Math.sqrt(rDist), hit: rHit, map: rMap, tile: rTile, horz: rHorz, origin: origin, texel: rTexel }; }

    Read the article

1