Search Results

Search found 654 results on 27 pages for 'toshiba satellite'.

Page 1/27 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Wireless cuts out on Toshiba Satellite S7208

  - by alecRN

  I recently got a Toshiba Satellite L875-S7208 with Windows 7 preinstalled. I installed Ubuntu 12.04 LTS dual boot to the same Windows partition. However, usually 15 minutes or less after booting, the wifi connection dies. Here's some hopefully relevant information: lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Toshiba America Info Systems Device [1179:fb40] Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb40] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 3 [8086:1e14] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel modules: i2c-i801 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8211] Kernel driver in use: rtl8192ce Kernel modules: rtl8192ce 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Subsystem: Toshiba America Info Systems Device [1179:fb37] Kernel driver in use: r8169 Kernel modules: r8169 lsmod Module Size Used by snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224066 1 joydev 17693 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 arc4 12529 2 snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 87692 0 serio_raw 13211 0 rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device sparse_keymap 13890 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev mac_hid 13253 0 mei 41616 0 wmi 19256 0 soundcore 15091 1 snd i915 472941 3 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 cfg80211 205544 2 rtlwifi,mac80211 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 ums_realtek 18248 0 uas 18180 0 usb_storage 49198 1 ums_realtek dmesg | grep firmware [ 15.692951] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 16.240881] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 452.419288] rtl8192c_common:rtl92c_firmware_selfreset(): 8051 reset fail. [ 458.572211] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 465.440640] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 472.337617] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 479.175471] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 485.978582] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 492.764893] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 499.579348] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 506.386934] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 513.209545] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 519.991365] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 526.778375] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 533.629695] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 540.426004] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 547.238125] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 554.024434] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 560.854794] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 567.678160] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 574.494666] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 581.336653] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 588.157710] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 595.221122] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 602.047429] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 608.829534] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 615.639079] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 622.454991] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 629.273231] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 636.056613] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 642.858096] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 649.640753] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 657.184094] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 664.008018] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 670.838639] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 677.675418] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 684.507255] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 691.310994] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 698.095325] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 704.914509] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 711.725178] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin uname -r 3.2.0-29-generic ifconfig eth0 Link encap:Ethernet HWaddr 4c:72:b9:59:6c:61 inet addr:192.168.0.11 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe59:6c61/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4447 errors:0 dropped:0 overruns:0 frame:0 TX packets:2762 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3671147 (3.6 MB) TX bytes:335133 (335.1 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:515 errors:0 dropped:0 overruns:0 frame:0 TX packets:515 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:83153 (83.1 KB) TX bytes:83153 (83.1 KB) wlan0 Link encap:Ethernet HWaddr 74:e5:43:32:47:95 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32958 (32.9 KB) TX bytes:10431 (10.4 KB)

  Read the article

• Toshiba Satellite L630 broken after bios update

  - by Mustafa Kamal

  I have Toshiba Satellite L630, which has been broken. It had no more OS installed in it. All the disk partition were cleared into one single empty unformatted partition. So I begin to install windows XP on this laptop. Apparently, win XP's driver support for this laptop is very limited. So I have to find almost all important driver (display, sound, etherned, wireless etc) on the net and install it manually one by one. So I start googling, and I got some driver download page from several Toshiba's website (the global version, the europe, asia, etc). Pretty hard to find the exact drivers, but I managed to find pretty good drivers. It's all works quite fine, although still have a few glitches. But everything turned into a big mess when I downloaded the "BIOS Update", which is also listed on Toshiba's official driver directory site. When I installed it, it show a big red warning sign telling me not to do anything while flashing the BIOS . I follow that instruction prudently. The process was finished, and that update BIOS software (it is InsydeH2O BIOS) told me that the BIOS has been succesfully updated and the computer need to restart. So I restart the computer. This is where the problem appear. I can no longer boot to my laptop. The booting process seems to be able to enter windows for a moment (it shows the windows XP loading screen), and then suddenly it just got that hateful blue screen and then instantiy restarts the machine. It goes on a loop. Boot bios - enter XP - blue screen - restart. I can't even try to reinstall my win XP again. Evertime the machine tries to boot to win XP CD, it got the same blue screen as I gets when loading from HDD. Many google search results said that I should open the laptop cover and try to clear CMOS with some kind of jumper or something. Or to unplug/re-plug the CMOS battery. Do I really need to do that? Is there anyway I could do without disassembling my laptop? I read some tricks about booting from USB device but I can't get the exat tools that I need to do that thing... Btw, this is my detailed laptop number photographed from the back of my laptop

  Read the article

• Issue with Toshiba Satellite C50 A-1JM

  - by Nathan Hawkes

  I am having some odd problems with my Toshiba laptop. For the last two days, it has not loaded past the boot screen for hours, if at all. When I force the laptop off and switch it back on, it goes to the Preparing Automatic Repair process but will not complete the process and go to the desktop. However, this only happens when the battery is plugged in. When I remove the battery and run the laptop on power, it works without issue. Would this be a battery issue (given it works without the battery) or a hard drive issue (given it won't get past the boot screen)? If neither, what would you suggest as a solution?

  Read the article

• Toshiba Satellite Touchpad not working correctly in Windows 7

  - by BoundforPNG

  I have a P305-S882 Satellite laptop that I have installed Windows 7 on. I went to the web site and downloaded the drivers available for Windows 7 but It still does not work correctly. The left mouse key does not always work like it should. I tried loading the Synaptic Touchpad driver for Vista but it still does not work correctly. Any ideas?

  Read the article

• Toshiba Satellite L655D-S5050 Processor Upgrade

  - by C-dizzle

  I have been searching for hours to see what kind of upgrade I can do with my processor. I just ordered replacement memory so I can go to 8GB instead of 3GB and now want to see what is available for my CPU. Currently this is what is on my laptop: (in case some of you don't know what comes with this model) Windows 7 Home Pro - 64 Bit AMD M880G Chipset AMD Athlon II Dual Core P320 - 2.1 GHz, 1MB L2 Cache The memory I ordered was Crucial 2 x 4GB DDR3 1333 PC3-10600 I'm sure someone out there can help me, because google hasn't been to friendly with me today.

  Read the article

• Can't change brightness on Toshiba l755 laptop

  - by albert

  I have a Toshiba l755 laptop, and I installed 12.04 64bit on it. The default brightness of the laptop is set to maximum value, and I can't change it. If I go to Configuration ? Brightness, the brightness doesn't change and neither does pressing the function keys. I tried changing some parameters of grub file, setting GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor". When changing the brightness from configuration, the value of /sys/class/backlight/toshiba/brightess changes, but screen remains the same. If I use the key functions, it changes the "actual_brightness" files. I don't know what else can I do, any suggestions?

  Read the article

• can not get Toshiba tv to full resolution

  - by Tloc2077

  I have a 23inch Toshiba model#23L1350U that I am using as a computer monitor via VGA plug; it is a full 1080P resolution TV but in Ubuntu it shows up as a Toshiba 72inch Television and wont go past the resolution 1366 by 1768. Has anyone came up with a solution to this problem..I used to get full 1080 resolution with my Insignia 32 inch TV so I know my hardware can push the signal, I am running a Radeon x1550 graphics cars 3200+ processor on a 756 chip set 64bit version of Ubuntu 13.04 your help is greatly appreciated and you may or may not be compensated for your time

  Read the article

• Toshiba Satellite C850, Wlan, rtl8188ce not working

  - by Hans

  I installed Ubunto 12.04 onto a brand new Toshiba Satellite C850 64 bit laptop. Wlan does not work, Tries to connect, gives up after some time. $Windows7 works 100%. There appears to be a problem with the driver. The actual hardware is a rtl8188ce chip. The firmware & driver loaded by Ubunto is for the rtl8192ce chip. How can I get and install a driver and firmware for Ubunto 12.04 and rtl8188ce?

  Read the article

• Satellite L640 Battery Applet Problem

  - by Dean

  Hayy guy i got a satellite l640 and i installed ubuntu 12.04 on it and i dont get the battery percentage ive tried a fair bit but this is my first time using linux. Ive gone into the power option and ive installed battery status apps and still i get nothing. There was one saying how much amps and what not the battery has and it all has 0.00 for everything, ive also tried the terminal cammands to see the percentage and that doesnt work. Is there anything i can do or should i just got back to windows.

  Read the article

• Toshiba satellite L500 no Wifi anymore!

  - by Benjamin Piller

  I have a Toshiba Satellite L500 with Ubuntu 12.04 and its wifi suddenly stopped working!! I've never seen like that before.. I tried also using external USB wifis but no success. I am not able to turn it on with the function keys nor using rfkill commands and similar WLAN manipulator Commands in the terminal! It was working before for at least 4-5 months!! The computer says it's turned off by hardware. I checked it and the Driver is fine. So why can i not use any Wifi on my computer?? Why it is suddenly disabled? I checked the BIOS too there is enabled the WLAN. I spent 10 hours for searching for solutions but i am out of ideas!!! Please Help!

  Read the article

• Unable to change Brightness Ubuntu 13.04 Toshiba Satellite A105

  - by RPi Awesomeness

  I have a Toshiba Satellite A105 s4384 running Ubuntu 13.04 and for some reason I cannot change the brightness. Neither the function keys (Fn + F6/Fn + F7) nor the settings work, and it is really bothersome, as I would like to occasionally decrease the brightness (long car trips where my battery doesn't last, etc.) Does anyone have any idea? Judging by the suggested questions this seems to be a rather prevalent issue, but none seem to have an answer! I had a similar problem with 12.04 LTS before I upgraded.

  Read the article

• Wireless not connecting on Ubuntu 13.10, Toshiba Satellite pro L 650

  - by user204842

  I have just installed Ubuntu 13.10 on my Toshiba Satellite Pro L650. After several reboots, installing/ uninstalling the broadcom driver I still can't connect. It detects the wi fi signals and the icon flashes as if it's trying to connect but never actually does. I'm really quite rubbish with code and stuff, but I really like Ubuntu as an OS and would really appreciate any suggestions anyone can offer! 02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

  Read the article

• Toshiba C55D Touchscreen..

  - by user177189

  Getting a new Toshiba C55D Touchscreen Laptop next week and want to run strictly Ubuntu and Firefox. Want to rip every scrap of Microsoft off of it (it comes pre-loaded). I'm a neophyte to Ubuntu and the finer points of setting up a laptop. Do I first install the latest Ubuntu release, plus Adobe, gmail, etc., then go about tearing the MS junk out?If anyone knows the ansswer, I certainly would appreciate some info on this. Toivo42.

  Read the article

• toshiba c800 Fn keys not working

  - by Nirjon Nj

  i am a new born baby in Ubuntu family. And i am really loving it. but i am having few issues which are rally annoying.Please help me to remain in this family. my Toshiba C800 laptop(12.04lts desktop) has special Fn keys as followed Fn+ F2-BRIGHTNESS DOWN F3-BRIGHTNESS UP F4-DISPLAY SELECT F5-TOUCH PAD on/off F6-PREVIOUS F7-PLAY/PAUSE F8-NEXT F9-VOLUME DOWN F10-VOLUME F11-MUTE F12-WiFi on/off now the problem is keys are working fine from F6 to F11(media player keys, i may say) but the keys from F2 to F5 and F12(setting change keys) are not working. please help me. i really liked ubuntu!!

  Read the article

• Toshiba Tecra A8 display resizes to 4:3 when an External display is used

  - by Pete

  I am very new to this so please excuse me if the solution is simple. I am running an old Toshiba Tecra A8 laptop and the screen is fine until I attach an external monitor via VGA then the laptops monitor resizes itself and changes ratios to 3:4 is there a fix for this or am I out of luck? As additional information: I have tried 3 or 4 different monitors and it happens with all of them, except that the external monitors hold the 3:4 display ration but get stretched out. Feel free to add comments requesting more information if needed for a fix.

  Read the article

• Microphone not working at all on a Toshiba sattelite p505 s8980

  - by flamingburner

  My built-in microphone doesn't work in "record audio" program and in Skype. I'm using ubuntu 11.10 in Toshiba sattelite p505 s8980. No mute button checked I have PulseAudio Volume Control installed currently when aim trying to use record audio program and hear what I record it plays noisy sound not my voice I changed my computer from 'Analog Stereo Output' to 'Analog Stereo Duplex', in both sound setting ( ubuntu ) and in PulseAudio Volume Control no problem in bios and in my windows seven sound worked perfectly and in ubuntu no problem in sound at all i can play music and movies and even in skype i can hear the sounf of who is taking to me ( it's about the microphone only "

  Read the article

• How to calibrate Toshiba LED screen - the colours are over saturated

  - by user94369

  I have purchased a new Toshiba Satellite C850-A812 laptop, with ATI Radeon HD 75xx series. When i first installed Ubuntu 12.04.1, the open source driver worked like a charm with the colors, i mean the colors were so vivid. However after installing the ATI proprietary driver from the repos, the colors went too "whity" and too bright. I even installed the updated driver, and went further to download the latest driver from ATI and install it in vain. I tried to use the ubuntu build in calibration tool, but it keeps on asking me to enter the ICC profile before i proceed to calibrate. I played with the catalyst control center, tried everything possible, but still the colors are still wayyyyyyyyy over exposed. Please advice :)

  Read the article

• No WIFI or LAN on Ubuntu 12.04 or 12.10 Live CD/USB using Toshiba qosmio x870

  - by Mighty

  I recently had issues with secure boot and couldn't boot the Live CD/USB but after disabling secure boot, I was able to 'TRY UBUNTU'. My currently problem is that I can't access WIFI or LAN from either Ubuntu 12.04 or 12.10 Live CD/USB which I do from Windows 8. Also, the wireless button is able to turn on and off the wireless LED but doesn't find available WIFI. Please, what should I do to get both WIFI and LAN working on Ubuntu using Toshiba qosmio x870? UPDATED: Here's the output of lspci: ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev a1) 07:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) 08:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8723 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

  Read the article

• Fn keys for Brightness not working on Toshiba Satellite L755

  - by JAMES PARENTE

  I am running Ubuntu 12.04 and I love it! The only problem is the keys for my brightness, F6 and F7, does not work when I am on battery power or AC power. It randomly works after I am idle for a while and log back in. The other weird thing is to see my battery indicator, I need to toggle my touch pad button that is right above the actual pad on and off for it to show up, and then back on so I can use my touch pad, obviously. The only other Fn buttons that work on my laptop is the button to mute (F1) Touch pad on and off (F9) and Fn+3 and Fn+4 for my volume. The only Fn buttons that I care if they work again are my brightness, which again, are F6 and F7. Thanks! James

  Read the article

• Backlit keyboard on Toshiba Satellite P755-S5184 doesn't work in Ubuntu 12.04

  - by chrisabner23

  I have the keyboard backlight turned on in bios to timer setting (1 second). When laptop boots the backlight works, but once ubuntu begins to load the backlights turn off. There is a function key combo that is supposed to turn it on (Fn +Z), hitting that brings up a notification balloon showing the backlit keyboard icon but it is grayed out. I tried using KeyTouch to try and get the backlight working but my laptop model isn't on the list. I'm new to Ubuntu, and have been searching the web and can't seem to find any answers that will work for my particular situation. Any information would be MUCH appreciated. Thanks!

  Read the article

• Toshiba Portege M400 screen rotation not working under Windows 7 x64

  - by Christi

  I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

  Read the article

• Toshiba laptop won't connect to D-link router

  - by user3314725

  This is Team 4786 Nicolet Fear FIRST FRC robotics, our problem is we cant get our D-Link (DAP-1522) to connect to our Toshiba (TECRA R950) laptop wireless. It has connected before in the past and we don't know why it is not working anymore. The D-links still function correctly and we think our problem lies within the Toshiba. EDIT:The Toshiba connects to the school Wifi, and other things (small FRC drive station) connect to the D-link, but they won't connect to each other.

  Read the article

• Toshiba Satellite laptop connected to HDTV

  - by VANJ

  I have a Toshiba Satellite A505-S6014 laptop running Windows 7 64-bit connected to a Toshiba Regza 42" HDTV with an HDMI cable. The laptop has a 16" display and the screen resolution is set to the maximum/recommended of 1366x768. The display output is set to "LCD+HDMI". The display looks fine on the laptop screen but on the TV it is not a "full screen" display, it leaves a good 3" black border all around all 4 edges. When I switch the display to "HDMI only", it is now too big for the TV screen and some of my desktop icons are no longer visible off to the side. What is the best way to set this up? I guess that since a 16" and 42" displays have different native resolutions, a LCD+HDMI mode is defaulting to the optimal size for the 16". But when I set it to HDMI Only, what is the appropriate resolution for a 42" full screen display? Thanks

  Read the article

• Toshiba satellite u400 hardware buttons, which software?

  - by Kugel

  I've recently intalled Windows 7 64bit onto my Toshiba U400 laptop. I went over to toshiba support-download-drivers page and downloaded every driver that was missing. I chose not to download bloated stuff, only the drivers. Win7 has much better control over hardware buttons out of the box then I had before. But there is one thing that annoys me. I have hardware button on the laptom that is supposed to switch LEDs on/off. Windows 7 turns my sound on/off instead. The second minor thing is, when I turn off sound by pressing Fn+Esc (or light off button;-), the sound is off, however any slight touch with volume wheel turns it right back on! This is something that Ubuntu does also out of the box. I wonder what's the logic behind this. Any lightweight solutions to these out there? Thank you

  Read the article

• Loading WPF satellite resources dynamically

  - by BJ

  Hello! I've read about satellite-assemblies being used in WPF localizations. However, I would like to ask if there is a way to load the satellite-assemblies without following the pre-defined directory structure that depends on the language (ex. If the system language is English, the WPF application looks for the satellite-assembly inside the "en-US" subfolder). This is because I would like to simply swap the satellite-assemblies when distributing the software package without having to create a specific folder per language that would hold the assemblies. I would just like to have the satellite-assembly and the main executable in the same directory. Is this possible and is there even an easy way to do this like simply loading the resource file on application startup once? Thanks!

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >