Search Results

Search found 98 results on 4 pages for 'toxic shock'.

Page 1/4 | 1 2 3 4  | Next Page >

  • My New Dell Workstation T-7500 gives electric shock

    - by Dan
    Just bought Dell T-7500 Workstation. When installation technician came to Install the workstation, he got an electric shock when he touched the Start Button. He also got shock when he touched Front Panel. No shock when touching rest of the Chassis. He called Dell Support & tried to troubleshoot by taking out various wires etc but did not help. I touched the same places & I also got shock. We checked everything possible including connecting to various outlets but it didn't solve the problem. Installation subcontractor said that they are not supposed to troubleshoot anything on new system, just install it & they made notes & left. I called my sales guy & it was weekend so he said he will take care of it on Monday. Here are my concerns : (1) Why does that happen ? Although it is a mild shock & it won't kill you but might damage other parts of workstation ? (2) Is this common for workstations ? (3) What should I do ? Of course Dell will try to troubleshoot again but should I let them do that OR ask for a New System ? (4) Wheat would happen if I continue using it till the new system arrives ? Thank You.

    Read the article

  • VGA Cable gave me an Electric Shock when connecting a Projector to a Laptop

    - by Felipe Luarte
    Yesterday I was trying to connect a Viewsonic Projector to my Samsung RC420 laptop... I followed this steps: I Plugged the Projector to a power source, in parallel I did the same thing with the laptop. Then I turned on the laptop, but not the Projector (this one turns a bright light when is connected to a power source). I put the VGA Cable to the Projector (this one being still turned down) and then when I was getting close to the VGA port of the Laptop... BAM! A big spark appear between the port and the cable! Immediately the whole electricity of my floor went off. A part of the port in my laptop kind of... melted down. It seems to be where the spark started. The same thing happened to the part of the cable involved. Now I'm using the laptop, and it seems that there is no problem in it, I haven't connect anything to the VGA port yet. And the projector is still working to, well... it turns on, and I haven't connect anything yet too. The projector was connected to the power source by a homemade electric extension.

    Read the article

  • Simulate 'Shock absorbtion' with tire rubber in PhysX (2.8.x)

    - by Mungoid
    This is a kinda tricky question and I fear there is no easy enough solution, but I figured I'd hit SE up before giving up on it and just doing what I can. A machine I am working on has no suspension or shocks or springs of any sort in the real machine, so you would think that when it drives over bumps, it would shake like crazy but because its tires (6 of them) are quite large they seem to absorb a lot of shock from the bumps. Part of this is because the machine is around 30k lbs and it just smashes/compresses any bumps in the ground down (This is another issue im still working on) and the other part is that the tires seem to have a lot of flex to them with a lot of air as well. So my current task is to simulate shock absorption in physx without visibly separating the tires from the spindle/axle.. I have been messing with all kinds of NxMaterial, NxSpring, Joints, etc. and have had no luck getting this to work. The main problem is that the spindle attached to the tire is directly in the center and the axle is basically solidly attached to the chassis, so if i give it any spring or suspension travel, that spindle on the tires will move upwards or downwards, looking very odd because now its not any longer in the center of the tire. I tried giving it a higher restitution but that just makes it bouncy without any shock absorption. Another avenue I am messing with is to actively smooth the terrain in front of the tires so that before it hits a bumpy patch, that patch is smoothed and it doesn't bounce. The only issue with this is that it is pretty expensive to do with 6 tires, high tesselation of the terrain and other complex things going on at the same time in this simulation. I am still working on this but I am hoping to mix and match a few different aspects to get the best possible outcome. This is a bit of a complex issue so I'm not expecting anyone to have a definitive answer, just hoping someone may think of something I haven't =-) -Side note: Yes i know PhysX 2.8.x is quite outdated but we have to stick with it for this implementation. We are in the process of going to another physics engine but it is out of scope to apply that engine to this project.

    Read the article

  • There's a stray current flowing from my monitor through the VGA cable to the PC. Is this safe?

    - by EApubs
    I have two monitors in my machine. One is an old LCS samsung monitor. Recently, I started to hear a small hum in my speakers (subwoofer) and replaced them. The new one also got the issues then I found our that its a grounding issue. I unplugged the PC's power chord. The monitor is still switched on. When I checked, there's current in the earth pin (ground pin). When I unplug the monitor, there's no current and the speaker is normal. Now, I have moved that monitor to my dad's machine and took his monitor. My question is, is it a big issues? The house's earthing system is working and its grounding the current. I won't feel it if I touch the machine like in many other cases. But still, is it good to keep that monitor attached to my machine? Can it harm the computer? What should I do?

    Read the article

  • Electricity in VAIO laptop ports while plugged in

    - by SRbH
    I have VAIO E series (SVE) laptop. While charger plugged in, touching VGA/HDMI/USB port metal casing gives me burning sensation. So, i checked it with voltmeter and i found that while plugged in there is presences of DC +1.0 V. Same case with my friend's VAIO E Series (VPCEH). Service center says this is normal. But i do not believe them as it is not the case with Dell Inspiron. Please let me know if you are facing same problem with VAIO and is it hazardous to devices which i connect to these ports (like HDD, LED, etc)?

    Read the article

  • What Poor Project Management Might Be Costing You

    - by Sylvie MacKenzie, PMP
    For project-intensive organizations, capital investment decisions define both success and failure. Getting them wrong—the risk of delays and schedule and cost overruns are ever present—introduces the potential for huge financial losses. The resulting consequences can be significant, and directly impact both a company’s profit outlook and its share price performance—which in turn is the fundamental measure of executive performance. This intrinsic link between long-term investment planning and short-term market performance is investigated in the independent report Stock Shock, written by a consultant from Clarity Economics and commissioned by the EPPM Board. A new international steering group organized by Oracle, the EPPM Board brings together senior executives from leading public and private sector organizations to explore the critical role played by enterprise project and portfolio management (EPPM). Stock Shock reviews several high-profile recent project failures, and combined with other research reviews the lessons to be learned. It analyzes how portfolio management is an exercise in balancing risk and reward, a process that places the emphasis firmly on executives to correctly determine which potential investments will deliver the greatest value and contribute most to the bottom line. Conversely, it also details how poor evaluation decisions can quickly impact the overall value of an organization’s project portfolio and compromise long-range capital planning goals. Failure to Deliver—In Search of ROI The report also cites figures from the Economist Intelligence Unit survey that found that more organizations (12 percent) expected to deliver planned ROI less than half the time, than those (11 percent) who claim to deliver it 90 percent or more of the time. This fact is linked to a recent report from Booz & Co. that shows how the average tenure of a global chief executive has fallen from 8.1 years to 6.3 years. “Senior executives need to begin looking at effective project delivery not as a bonus, but as an essential facet of business success,” according to Stock Shock author Phil Thornton. “Consolidated and integrated visibility into individual projects is the most practical solution to overcoming these challenges, which explains the increasing popularity of PPM technologies as an effective oversight and delivery platform.” Stock Shock is available for download on the EPPM microsite at http://www.oracle.com/oms/eppm/us/stock-shock-report-1691569.html

    Read the article

  • Any way to use a class extension method to support an interface method in C#?

    - by dudeNumber4
    Console app below compiles, but the interface cast fails at run time. Is there an easy way to make this work? namespace ConsoleApplication1 { class Monkey { public string Shock { get { return "Monkey has been shocked."; } } } static class MonkeyExtensionToSupportIWombat { public static string ShockTheMonkey( this Monkey m ) { return m.Shock; } } interface IWombat { string ShockTheMonkey(); } class Program { static void Main( string[] args ) { var monkey = new Monkey(); Console.WriteLine( "Shock the monkey without the interface: {0}", monkey.Shock ); IWombat wombat = monkey as IWombat; Console.WriteLine( "Shock the monkey with the interface: {0}", wombat.ShockTheMonkey() ); Console.ReadLine(); } } }

    Read the article

  • How to: Inline assembler in C++ (under Visual Studio 2010)

    - by toxic shock
    I'm writing a performance-critical, number-crunching C++ project where 70% of the time is used by the 200 line core module. I'd like to optimize the core using inline assembly, but I'm completely new to this. I do, however, know some x86 assembly languages including the one used by GCC and NASM. All I know: I have to put the assembler instructions in _asm{} where I want them to be. Problem: I have no clue where to start. What is in which register at the moment my inline assembly comes into play?

    Read the article

  • How to shorten brain context switch delay when need to use new technology\framework?

    - by gasan
    The problem is when I have to deal with a new framework\library\language it completely slows my work process, at first it's kind of shock, you're sitting on your place about a day doing nothing surfing the net, because you simply can't do anything even read docs, then, on the second day I realize that I definitely should do something and starting read about it, then I realize that I don't understand it, then I'm reading until I got feeling that I should show some results immediately and then I'm writing the code quite fast and the job doesn't seem to be difficult. Then job is done and I won't probably return to that technology\framework for a month or a year or never at all. And I will almost certainly forget almost everything about it after a month. To illustrate by checkpoints I experience: shock, long studying times, work with the new tech briefly, never use it afterwards, then I completely forget it. So what would be the solution here?

    Read the article

  • Releasing poorly written software...

    - by eddienotizzard
    I've made a poorly written, yet fully functioning website, in (shock, horror, shock) PHP. Everything works as expected, I've implemented the necessary security measures: http://php.net/manual/en/security.php and phpsec.org/projects/guide/ It's poorly written in the sense that it's a bunch of functions thrown together that do something...oddly enough I was consistent with the naming conventions. Would you release something you were not happy with, but worked? I would also like to point out that I don't collect much user information (username, email and password) is about it -- but it's not really the security part I'm worried about, it's the spaghetti code I've written.

    Read the article

  • PLS HELP!!How to boot windows 7 after installing ubuntu 12.10?

    - by user113553
    Im new to linux and im interested in learning it so I installed ubuntu 12.10 yesterday. Installation went smoothly and i chose "install alongside windows option" and I set about 50 gb using that slider and i tot i used 50 gb from c: drive but to my shock it used 50 gb space from f: drive. This was my first shock.Then when i restarted n tried to log into windows, nothing happened a black screen appeared saying "To restart press alt+ctrl+delete" but even pressing that it wont restart. No matter how many times i try rebooting windows is not booting same black screen saying restart appears. But i can log in to ubuntu and i can see that windows c: drive is fine. PLEASE HELP ME!!!!

    Read the article

  • Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

    - by 5th Wheel
    The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

    Read the article

  • Get Rid off Computer Virus

    When you hear those words like love bug, back orifice, Trojan horses, and the Davinci virus, you get the shock of your life especially when you see them on your PC. All these are greatly hyped Antivi... [Author: Sarah N Jones - Computers and Internet - April 21, 2010]

    Read the article

  • Banned Children’s Toys from Christmases Past

    - by Jason Fitzpatrick
    What could possibly go wrong giving a child a nuclear science kit that includes highly poisonous materials inside? Everything of course, which is why that particular toy only lasted a single holiday. Buzzfeed reports on some of the toys of holidays past that were quickly pulled off the shelves. In regard to the nuclear kit pictured here, they write: Only available from 1951–1952, this science kit for CHILDREN included four types of uranium ore, a Geiger counter, a comic called Dagwood Spits the Atom, and a coupon for ordering MORE radioactive materials. One of the four uranium ores included was Po-210 (Polonium) which, by mass, is 250,000 times more toxic than hydrogen cyanide. “Merry Christmas, Kevin, here’s that giant box of poison you asked for.” Hit up the link below for more entries, including some pulled from the shelves as recently as 2007. 8 Banned Children’s Toys From Yesteryear [BuzzFeed] Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

    Read the article

  • Set a specific stylesheet based on session variable in javascript

    - by user2371301
    I have an option for a user to select his/her own theme while logged into the system and this theme is set in a MYSQL Database and called each time the user logs in, this is called by: <?php $_SESSION['SESS_THEME_NAME']; ?> Now, I had this working in a PHP file but I need it to work in Javascript instead unfortunately. And I need some help. I looked at the code using the developers tools on Google Chrome and looks like the above code is not resolving within the javascript file. Which makes sense because you can't access session variables within a javascript file (as I found by searching Google.) The code is basically supposed to set the specific stylesheet based on the value extracted from the MYSQL database. So if the database says Default the script needs to tell the webpage to use the default.css file. And so on and so forth. My attempt at writing this is as follows: var themName="<?php $_SESSION['SESS_THEME_NAME']; ?>"; if (themeName == "Default") { document.write("<link re='stylesheet' type='text/css' href='css/mws-theme.css'>"); }; if (themeName == "Army") { document.write("<link rel='stylesheet' type='text/css' href='css/mws-theme-army.css'>"); }; if (themeName == "Rocky Mountains") { document.write("<link rel='stylesheet' type='text/css' href='css/mws-theme-rocky.css'>"); }; if (themeName == "Chinese Temple") { document.write("<link rel='stylesheet' type='text/css' href='css/mws-theme-chinese.css'>"); }; if (themeName == "Boutique") { document.write("<link rel='stylesheet' type='text/css' href='css/mws-theme-boutique.css'>"); }; if (themeName == "Toxic") { document.write("<link rel='stylesheet' type='text/css' href='css/mws-theme-toxic.css'>"); }; if (themeName == "Aquamarine") { document.write("<link rel='stylesheet' type='text/css' href='css/mws-theme-aquamarine.css'>"); }; Any help once so ever would be awesome and much much appreciated! I am reaching a deadline :/

    Read the article

  • Passed: Exam 70-480: Programming in HTML5 with JavaScript and CSS3

    First off: Mission accomplished successfully. And it was fun! Using the resources listed in my previous article about Learning Content, I'd like to thank Microsoft Technical Evangelists Jeremy Foster and Michael Palermo for their excellent jump start videos on Channel 9, and the various authors at Pluralsight. Local Prometric testing centre Back in November I chose a local testing centre which was the easiest to access from my office despite the horrible traffic you might experience here on the island. Actually, it was not the closest one. But due to their website, their awards as Microsoft Learning Center, and my general curiosity about the premises, I gave FRCI my priority. Boy, how should I regret this decision this morning... The official Prometric exam guide asks any attendee to show up at least 30 minutes prior to the scheduled time of the test. Well, this should have been the easier part but unfortunately due to heavier traffic than usual I arrived only 20 minutes before time. Not too bad but more to come. The building called 'le Hub' is nicely renovated and provides the right environment for an IT group of companies like FRCI. I think they have currently 5 independent IT departments over there. Even the handling at the reception was straight forward, welcoming and at my ease. But then... first shock: "We don't have any exam registration for today." - Hm, that's nice... Here's my mail confirmation from Prometric. First attack successfully handled and the lady went off again to check their records. Next shock: A couple of minutes later, another guy tries to explain me that "the staff of the testing centre is already on vacation and the centre is officially closed." - Are you kidding me? Here's the official confirmation by Prometric, and I don't find it funny that I take a day off today only to hear this kind of blubbering nonsense. I thought that I'll be on the safe side choosing a company with a good reputation here on the island. Another 40 (!) minutes later, they finally come back to the waiting area with a pre-filled form about the test appointment. And finally, after an hour of waiting, discussing, restarting the testing PC, and lots of talk, I am allowed to sit down and take the exam. Exam details Well, you know the rules. Signing an NDA doesn't allow me to provide you any details about the questions or topics that have been covered. Please check out the official exam description, and you're on the right way. Sorry, guys... ;-) The result "Congratulations! You have passed this Microsoft Certification exam." - In general, I have to admit that the parts on HTML5 and CSS3 were the easiest after all, and that I have to get myself a little bit more familiar with certain Javascript features like class definitions, inheritance and data security. Anyway, exam passed - who cares about the details? Next goal Of course, the journey to Microsoft Certifications continues and my next goal is to pass exams 70-481 - Essentials of Developing Windows Store Apps using HTML5 and JavaScript and 70-482 - Advanced Windows Store App Development using HTML5 and JavaScript. This would allow me to achieve the certification of MCSD: Windows Store Apps using HTML5. I guess, during 2013 I'll be busy with various learning and teaching lessons.

    Read the article

  • Creating a network link between 2 very close buildings

    - by Daniel Johnson
    I have a charity who have two adjacent medium sized modern detached houses (in the UK): the buildings stand next to each other and are less than 5 metres apart. They have DSL connected to a single computer in one of the buildings. They want to add a network with wireless, and want it to work across both buildings. Being a charity they need to keep costs down. The network would be used for sharing Word documents, e-mail, browsing and skyping. My initial thoughts were to connect the buildings with fibre. So: Option 1 Use fibre between the buildings. Sufficient cable and two TP-LINK MC100CM Fast Ethernet Media Converters. Cost ~£80.00. But there is the extra cost and hassle of running the cable down and up the external walls, lifting and relaying paving, and burying underground. Never having fitted fibre I'm also a little worried about going up the wall and then bending the cable at 90 degrees to go through the wall and into the building. Option 2 Use two TP-Link TL-WA7510N High Powered Outdoor 5Ghz 15dBi Wireless antennas to connect the buildings. There is a clear line of sight at first floor level. Cost ~£100. And much easier to fit than fibre! Is using the TL-WA7510Ns overkill? Is there something more suitable? I had hoped to use some Netgear stuff, e.g. two DGN2200, one in each house and also use them to provide the wireless link between the buildings. However, in bridge mode wireless client association is not available and repeater mode with client association only supports WEP security which isn't strong enough. Is there something similar that would be up to the job? Option 3 Connect the buildings with UTP cable. My concerns here are risk of electric shock due to a difference of potential between the buildings (or are they so close this shouldn't be an issue) and protection from lightning strikes. Is fitting lighting arrestors expensive? And what can be done to ameliorate against the risk of shock? This all falls outside my area of expertise so I would really appreciate some advice.

    Read the article

  • Best practice guide to install to Program Files

    - by Cold T
    Have seen quite a few questions in Serverfault and Super User but none that specifically answers my question. We have an application that is being provided and installed by a third party company. They are charging market rate 'consultancy' fee to do this. They installed majority of the folders in the root of the C drive, to my shock. Are there any official Microsoft Best Practice guides out there to say applications should be installed in Program Files.

    Read the article

  • Homebrew LEGO CD Duplicator Copies CDs On The Cheap

    - by Jason Fitzpatrick
    If you’d like to bulk copy CDs/DVDs without the sticker shock of a $500+ commercial duplicator, this DIY LEGO duplicator is a homebrew solution. Paul Rea wanted to rip and copy CDs and DVDs without shelling out for a commercial duplicator and without the hassle of being bound to that commercial duplicator’s propriety software. His homebrew solution–a combination of LEGO, a rotating base, an Arduino controller, and little ingenuity–handles his ripping and copying needs with ease. Watch the video above to see it in action then hit up the link below for the build log and Arduino code. CD Duplicator [PaulRea.net via Make] HTG Explains: Understanding Routers, Switches, and Network Hardware How to Use Offline Files in Windows to Cache Your Networked Files Offline How to See What Web Sites Your Computer is Secretly Connecting To

    Read the article

  • 12.04 boots into terminal after first install. How to boot into GUI permanently?

    - by Deniz
    As a person with a quite limited CLI experience I congratulate myself on installing Ubuntu on an ancient non-pae Fujitsu Amilo M1425 thru the network with mini.iso. However upon reboot I'm met w/ the following: Ubuntu 12.04.1 LTS ubuntu-fujitsu tty1 ubuntu-fujitsu login: for which my specified login during setup is not accepted. (I'm quite sure its correct) Let's assume this screen is passed, how to start the GUI and make it the permanent option during boot? This box will return to a mostly comp-illiterate person, for which the existence of ubuntu will be an enough shock already. Wouldn't wanna leave him w/o the GUI. Other posts here mention the command startx but I probably need a login in the first place.. So "why won't it accept my login & how can I make the GUI-boot permanent?" is my question. Thanks in advance.

    Read the article

  • Deleting ASP.NET application subdirectories causes application recycle!

    - by geekrutherford
    This may not be news to most people, but was definitely a shock to me!   In the .NET 2.x framework a "feature" was implemented where by an ASP.NET application is automatically recycled if any subdirectory is deleted. This was apparently implemented to prevent stale content from appearing on a site.   The unfortunate side effect of this "feature" is that when using the "InProc" model for session management, all session data is lost if a subdirectory is deleted.   For those who progammatically may be adding/deleting directories within their application as inherent functionality, this causes a rather large problem.   The solution? Create your folder(s) which may be programmatically deleted outside of the root folder for the application. Alernatively, utilize a file based structure vs. folders since deleting files does not result in the same issue.

    Read the article

  • Choice of node.js modules to demo flexibility

    - by John K
    I'm putting together a presentation to talk about and demo node.js to client-side JavaScript developers. The language concepts and syntax are not an issue for them, so instead I'd like to get right into things and show off node's abilities that differ from client-side scripting. There are numerous modules available in the NPM registry and many people have much more experience with the registry than I do. I'm looking for a selection of node modules based on recommendations from your experience that show a variety of uses for node that are practical, broadly useful and can be demonstrated with a small code sample without requiring much domain knowledge on behalf of the audience. Neat and impressive is good too - I can throw in a couple of shock and awe items for cool factor. To be fair, top-voted answers will get most consideration for inclusion. My hope is this will result in a well-rounded demonstration of node technology.

    Read the article

  • Unallocated space with important data

    - by Chethan S.
    I used GParted to convert a primary partition to extended one after copying the data to another partition. After having the extended partition I moved the data back. To my utter shock after a restart I found out that the new extended partition did convert into "unallocated space". I tried installing testdisk. Testdisk could identify the partition as a primary partition and not the newly created extended partition. So what should I do now? I badly want the data back.

    Read the article

  • Install Ruby 1.8.7 on Fedora 11/12

    - by tadman
    Is there a simple way to install Ruby 1.8.7 on Fedora 11 or 12 without side-stepping the yum/RPM package management system too severely? Building from source is always an option, but it tends to deploy things in irregular places and proves to be more fuss to maintain in the long run. A self-built RPM is okay, but I'm presuming there's a .rpm out there somewhere already. Rails is not especially happy with 1.8.6 and the Fedora community, for various reasons, considers 1.8.7 to be toxic and best avoided.

    Read the article

1 2 3 4  | Next Page >