Search Results

Search found 103 results on 5 pages for 'wap'.

Page 1/5 | 1 2 3 4 5  | Next Page >

  • Is WAP still in use?

    - by pek
    I apologize if this question sounds too generic, but I am researching WAP (Wireless Application Protocol) and I am having a hard time finding recent news. Do cell phones still use WAP or is it replaced by TCP/IP? I am guessing that since WiFi is supported in new cell phones, WAP isn't used anymore. Or did I misunderstand what is WAP? Is any aspect of WAP used today? I supposed there is still Push Mail and MMS.

    Read the article

  • Sprint MMS: APN, WAP, and MMSC?

    - by colithium
    I am attempting to use some third party software to send an MMS Message through an attached Sprint mobile phone. The problem is, I cannot find Sprint's specific configuration anywhere. Example configuration for many providers can be found here. Specifically, I need: APN (Access Point Name) WAP (Wireless Application Protocol) Gateway Provider MMSC (MMS Store and Forward Server) Potentially a Login/Password if Used Note: I already have a request into ActiveXperts, no response yet.

    Read the article

  • Should a MobiTex service with a highly resilient website offer content over WAP?

    - by makerofthings7
    I'm trying to offer services over the MobiTex network (also see wiki) and want to reduce double-work. I'm trying to understand if it is a good idea to WAP enable my website. Given that WAP usage is increasing (since MMS is a hybrid of SMS + WAP), and the FCC has required every operator in the 700Mhz range to implement it I'd like to fully understand if there are benefits to the technology for certain critical applications. For example, if GPRS allows SMS traffic, voice, and Data, presumably they are handled by different Gateways. If there is another gateway for WAP traffic I would think that it would act as a backup if the data gateway was overloaded. Are there resiliency benefits to using WAP on a critical website? i.e. Content delivery (push or pull)

    Read the article

  • HTTP Request from a PC to load the contents of a wap site

    - by cocoatoucher
    When I try to load a wap site with PHP HTTP request from my PC, host of the web site recognizes that I'm sending the request from a PC and redirects me to their actual web site and I can't load the wap site. Is there a way to behave like a mobile browser and prevent this redirection? Although an answer regarding any programming language is ok, a php specific answer will be better.

    Read the article

  • send SMS from WAP page

    - by user217069
    This question is related to sending an SMS from a link in a WAP page? Historically I have used sms: which has worked on SonyEricsson, Nokia and other such 'legacy' devices. An example of the mark-up would be; <a href="sms:0123456789?body=test%20message">send</a> I am aware that i-phone does not allow you to specify the body. If the body tag is present then the device closes the browser and opens the SMS application but does not go as far as taking the user to message creation. As such the following does not really work; <a href="sms:0123456789?body=test%20message">send</a> however, this partially does... in that it takes the user to the editor and selects the recipient. <a href="sms:0123456789">send</a> My tests with Android (HTC desire) cause the message editor to crash (with the above examples). I have managed to get the message editor to open successfully but not managed to pass any details (recipient or message body) using; <a href="sms://0123456789">send</a> Note the :// which is not correct according to the Nokia specs. Has anyone had any more success? Sorry if this is a bit hazy, its probably more of a discussion than a question.

    Read the article

  • Making apache 2.2.11 parse .wml files as PHP?

    - by RD
    I've tried a variety of combinations, the following being my last attempt: Addtype text/vnd.wap.wml wml Addtype image/vnd.wap.wbmp wbmp AddType text/vnd.wap.wmlscript wmls AddType application/vnd.wap.wmlc wmlc AddType application/vnd.wap.wmlscriptc wmlsc AddType application/x-httpd-php .wml How can I get stupid Apache 2.2.11 to parse .wml files as PHP?

    Read the article

  • Unable to display wap version during "Extended permission"

    - by Mickey Cheong
    Hi, Im trying to redirect to facebook to request permission to publish stream. However, it only works when i did not specify any display parameters, it shows me a web version of it. I wanted a wap version instead. What should I do? Here's the code: <form method="post" action="https://graph.facebook.com/oauth/authorize"> <input type="hidden" name="client_id" value="1XXXXXXXXXXXXXX" /> <input type="hidden" name="scope" value="publish_stream" /> <input type="hidden" name="redirect_uri" value="http://www.redirect.com/" /> <input class="button" type="submit" value="Request..." /> </form> When i submit this form, it will redirect to http://www.facebook.com/connect/prompt_ … y=page.... If I were to change the "redirected url"'s display param to "wap" it will works. However, if I were to submit to https://graph.facebook.com/oauth/authorize?display=wap. Nothing will happen and it will redirect back to the source url. Any help/hint will be grateful. Thanks a mil, Mickey

    Read the article

  • Is it possible to impersonate another WAP by intercepting communication with other client?

    - by OSX NINJA
    There is a well known WAP that lots of people use. Someone comes in with a laptop equipped with a sniffer. The laptop sniffs people trying to log on to the WAP. It intercepts the connection, and when people try to log on to the WAP, they unknowingly log on through that person's laptop instead. All communication between the WAP and people's laptops go through that person's laptop. That person's laptop is able to block access to certain websites that the WAP would normally allow.

    Read the article

  • ASP.NET MVC WAP, SharePoint Designer and SVN

    - by David Lively
    All, I'm starting a new ASP.NET MVC project which requires some content management capabilities. The people who will be managing the content prefer to use SharePoint Designer (successor to FrontPage) to modify content. I'd like to allow them to keep doing that. The issues are: Since I'd like this to be a WAP, not a website project, how can I allow them to see their changes in action without requiring them to have Visual Studio on their local machines? Can I specify a "default" action for a controller so that given a url like /products/new_view_here Can I let them save pages (views) and see them in the browser without having to go through the check-in/build/deploy process? I'd like their changes to be stored in SVN; SharePoint designer seems to only support Visual SourceSafe (ugh) directly. The ideas I've come up with so far are Write an HTTP handler that implements the FrontPage Server Extensions protocol. This sounds time consuming, but I haven't yet looked at the protocol spec. However, it would allow me to perform whatever operations I want on the server side, including checking files into SVN. Ditch the WAP in favor of a website project. I do not like having the source present on the server, however. Also, will MVC work in a website project? Surely someone has tackled this problem before?

    Read the article

  • Will a 2.4Ghz WAP intefere with a 5.0Ghz WAP if placed directly next to each other

    - by Dan
    This is mostly a curiosity question to people who know more about radio and wi-fi than I. The 2.4Ghz band is massively overpopulated near my house to the point of sometimes getting 1000ms pings to the router from only a few feet away. inSSIDer finds at least 10 broadcasting SSID's within around 15 seconds of starting, so this isn't a real surprise to me! Sometimes I can get good results by changing the channel to something like 3 or 8, but it's usually temporary as the others use Auto Channel and hop around. Now, the router I have is capable of 5.0Ghz, as is the laptop I type this on. Switching to 5.0Ghz gives superb results: I can download at ~90Mbps and get consistent 1ms pings. The problem is that only this laptop supports 5.0Ghz! My question: Would I still get decent 5.0Ghz performance if I place a 2.4Ghz access point directly next to my router? And, indeed, will 2.4Ghz continue working as 'normal'? Testing would be an obvious step, but I threw all my superfluous equipment out in a recent house move. My understanding is that I should get good performance, certainly in comparison to having two devices using the same frequency range, but I do believe there will be some impact by the virtue of them being directly next to each other. (Cabling is not an option due to it being a rented house)

    Read the article

  • Set up Linux box as WAP for MyBookLive?

    - by AcidFlask
    I inherited an old Linux box as well as a MyBookLive and would like to make the MyBookLive available over my wireless, essentially using the Linux box as a wireless access point. I just wiped the Linux box (home) and installed Ubuntu 12.04 on it. My network setup currently looks like this: (192.168.0.1 netmask 255.255.255.0) ISP --- wireless router --- wlan0 on home (192.168.0.12) | eth0 on home --- MyBookLive MacBook (192.168.0.11) so that the MyBookLive is basically a glorified external hard drive. The router does have an Ethernet port, but it is being used by my roommate's computer so I can't plug the MyBookLive directly into it. Right now I can ping MyBookLive.local and MacBook.local from home, but I am having trouble understanding and figuring out what the correct iptables commands are to make my MacBook see my MyBookLive through the Bonjour network. Also, I'm not sure if I need to set up DNS to forward xxx.local Bonjour/Zeroconf addresses. I tried the following to forward my entire wired network (which has only my MyBookLive) to a single IP address: sysctl net.ipv4.ip_forward=1 iptables -A FORWARD -i wlan0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT iptables -t nat -A PREROUTING -i eth0 -p tcp -j DNAT --to 192.168.0.66 iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --to 192.168.0.66 but I can't ping this address from my MacBook. This is probably horribly wrong, but I am a complete noob at setting up this kind of network and could use some expert help with setting this up properly.

    Read the article

  • Cisco 1242 WAP Bridging

    - by DanWake
    I'm looking to connect two facilities with a a pair of Cisco 1242 access points and am looking for advice on configuration. We have multiple VLANs running that will need to be passed through the connection, but otherwise a fairly simple setup. Any advice on best practices from security, reliability, and speed points of views?

    Read the article

  • Getting WAP embedded video in android AND iphone?

    - by Jon
    Recently a client asked me to make their site "work on smart phones", which normally wouldn't be too much of an issue... However it's a video site, and I have absolutely no idea where to even begin. Right off the bat I'm not even going to consider allowing the site to even function in anything other than Android (Maybe even 2.0+) and iPhone, maybe Blackberry and WinMo. But beyond that... What do I do? I'm looking at using the tag, however I'm unsure what, if any, codecs which phone uses. Is HTML5 even adopted in their browsers yet? Could someone please point me in the right direction? Am I going about this the right way, using the tag? Or is there some magical html element both iPhone and Android (And BB and WMo) that lets them run video in their native video players (Like on youtube).

    Read the article

  • Testing WML documents without Nokia

    - by Steven Wright
    Are there any testing platforms out there for testing WAP/WML pages besides that provided by Nokia? I have tried to get ahold of the Nokia Mobile Internet Toolkit but it's too tied down with authentication and certificates etc. Nokia software is like Adobe and......sucks.

    Read the article

  • Wireless signal changes from strong to weak after connecting

    - by gibberish
    Router (primary AP) is a WRVS4400N, WAP (signal booster) is a WAP4410N. Problem: User is physically located within ten feet of WAP (200 feet from main wireless router). Signal is at 5 bars as user connects to wireless network. Within seconds, signal is at or below two bars and connection is poor. Background: Trying to solve problem of weak wireless signal in back offices. Desired result is for client laptops to automatically switch to the stronger signal. WAP is connected to network via Ethernet cable. WAP is set to AP mode (instead of Wireless Repeater mode) WAP does appear to boost signal. Using Windows 7 sys tray Connect To A Network applet, can observe signal boost as laptop approaches the WAP. Above-described problem happens to users located near or beyond the WAP. It does not happen to users in close proximity to the router. Secondary Question: If using WAP in AP Mode, do WAP and Router (primary AP) need to be on the same channel?

    Read the article

  • Finding the Geo-location on a Blackberry?

    - by Frederico
    I'm running into an issue when trying to geolocate users whom are using blackberry devices. Currently there are a few checks that I go through to geolocate the individual the first, using the navigator paramater inside browsers. if(navigator.geolocation) if this fails then I have a backup using a free service (for testing) from maxmind: See Here Yet this doesn't return back the city at all either. I've then tried using the JSPI that google maps proviedes, and echoing out the google.loader.ClientLocation: if (google.loader.ClientLocation != null) { document.write("Your Location Is: " + google.loader.ClientLocation.address.city + ", " + google.loader.ClientLocation.address.region + " lat: " + google.loader.ClientLocation.latitude + " Long: " + google.loader.ClientLocation.longitude); } else { document.write("Your Location Was Not Detected By Google Loader"); } When this didn't work I tried following the google maps 3.0 detect location seen here: Detecting Location I've done all this after seeing this work correctly in google latitude.. so I know there has to be a way to get the location... any thoughts, ideas on what I could possibly try? Thank you kindly

    Read the article

  • ASP.NET website not working properly in mobile

    - by ria
    I have created a simple app with a page having a server side form, three fields and a button that submits and performs two operations - 1) adds the form fields to the database table 2) sends an email. Now everything works fine on the web browser on my machine but when I access the app through my mobile, the page does not seem to work. the UI and all are set but the button click functionality doesnt seem to be working and also the label which is set after a successful submit is already visible and showing the "thank you" message. Am i doing something wrong here? I have checked the app on Nokia Smartphone browser, android phone, and iphone simulator.

    Read the article

  • WML And Downloads

    - by Nathan Campos
    I'm now playing with WML and WMLScript, but I'm doing a site that will have some content to download(some txt, doc, bmp, mpg, avi and jpg files), but some of my friends(that never developed in this language, just used the technology on the beginning) said that it's impossible. Then here are my questions: It's possible? How to do it? Remember that I'm using PHP combined with WML.

    Read the article

  • Submit Form Equivalent To WML

    - by Nathan Campos
    I'm playing a little bit with WML with PHP, then I want to know what is the equivalent of this on WML: <form action="upload_file.php" method="post"enctype="multipart/form-data"> <label for="file">File:</label><br /> <input type="file" name="file" id="file" /><br /> <input type="submit" name="submit" value="Submit" /> </form>

    Read the article

1 2 3 4 5  | Next Page >