Search Results

Search found 77 results on 4 pages for 'wrt54g'.

Page 1/4 | 1 2 3 4  | Next Page >

• Connect to host by name using a Linksys wrt54g as my router and dhcp server

  - by warren

  I have a Linksys WRT54G router at my house. How do I enable/perform connect-by-name on my network (like "kitchen" and "musicbox") on Windows XP, Linux (Ubuntu and CentOS), and Mac clients? Sometimes it seems to work "on its own", but normally I have to go by IP address - which is a bit of a pain to remember properly.

  Read the article

• Wifi connection issues for Android with Linksys WRT54G

  - by Paul

  I have had this Linksys WRT54G for many years now, and it has always worked without a hassle. But for some reason I am unable to connect my brand new Android phone (Magic). The wireless network is broadcast and simply secured using WPA PSK TKIP. My phone sees the network (with excellent signal strength) and correctly asks me for the WPA password. Then when it tries to connect it stays for a while on "Retrieving address..." (liberately translated from Dutch) and finally fails reading "Remember, secured with WPA". Does anybody know how to solve this issue? edit: the android phone is genuine (not modified/rooted or whatsoever).

  Read the article

• Broken web interface in WRT54G router

  - by asmo

  I flashed my WRT54G (v3) from a custom firmware to the lastest Linksys one (v4.21.1) Now the internet/LAN works fine, but the web interface (http://192.168.1.1/) shows broken pages. I tried to manually navigating to the firmware upgrade page (by entering its URL), but it is broken too and not working. I tried a 30/30/30 reset twice, but the broken web interface still shows up. I tried to flash using the tftp2.exe application, which told me that the router didn't respond to the request. I tried to flash using the Windows commandline TFTP protocol, but I don't know how to supply a password on this prococol. (there is a factory default password ("admin") which I can't remove since the web interface is broken)

  Read the article

• To same computer Remote desktop thrue WRT54G router

  - by Kangarooo

  Cant access from my Same comp same comp to test if all is ok. Tryd all mentioned posibilities. Tryd my ip xxx.xxx.xxx.xxx / localhost with / without :5900 added with / without in "Remote desktop" checked "Configure network automatically to accept connection" with / without in router WRT54G enabled port 5900 forwardet to my comp 192.168.1.3 UPNP is enabled. I can connect to one other comp witch isnt using router and checked "Configure network automatically to accept connection" and to one thrue TENDA W311R+ router where ive put port forwarding to 5900 and there works xxx.xxx.xxx.xxx:5900 Whats wrong? What ive missed?

  Read the article

• To same computer Remote desktop thrue WRT54G router

  - by Kangarooo

  Can't access from my Same comp to same comp to test if all is ok. Tried all mentioned posibilities. Tryd my ip xxx.xxx.xxx.xxx / localhost with / without :5900 added with / without in "Remote desktop" checked "Configure network automatically to accept connection" with / without in router WRT54G enabled port 5900 forwardet to my comp 192.168.1.3 UPNP is enabled. I can connect to one other comp whitch isn't using router and checked "Configure network automatically to accept connection" and to one through TENDA W311R+ router where i've put port forwarding to 5900 and there works xxx.xxx.xxx.xxx:5900 What's wrong? What have i missed?

  Read the article

• DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

  - by FeRtoll

  Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

  Read the article

• Motorola SBG6850 / Linksys WRT54G network problem

  - by user96407

  I am trying to resolve issues with connecting my desktop and LAN capable printer to my network. I recently upgrade to the Motorola Cable Modem Gateway SBG6580 and have TWC coming into it, this works great for wired and wireless connectivity. Although, I am unable to connect to my device from this modem gateway. So, I am trying to cable a Linksys WRT54G (firmware 4.21.4 build 0) to the backside of the SBG6850 so I can use my printer on my network from both my wired desktop and wireless devices. I am pulling wireless off of the SBG6580 and do not want to change this. I have disable the wireless feature on the Linksys WRT54G at this moment. Can someone please help me through this dilemma? I am open to both wired and wireless solutions, but please tell me which approach your sharing in the first line of your response. Cheers!

  Read the article

• linksys wrt54g router to a Cisco router?

  - by jasondavis

  This may be a strange question but I have no clue. I currently have a basic linksys wrt54g router fo9r my home network. I am considering getting a rack/cabinet and running a home server or 2 and hooking up my home network to it. If I were to do0 this I could pick up a cisco rack mounted router and switch off ebay to use. So If I were to do this, would I just plugin in the cables for the cisco router from my dsl modem or is there more to it to get these working?

  Read the article

• WRT54G - how use port forwarding and VNC

  - by unknown (yahoo)

  Since I have my home network behind a WRT54G, the router has an external "real" IP address, and the PCs behind it have 192.168.xxx.xxx addresses. I would like to be able to control one of them remotely - preferably using UltraVNC, but I am open to suggestions. Since I can't directly address that PC from the internet, I figured I could address a port on my router and have the traffic forwarded to the PC (and the same in the reverse direction). Is that feasible? Can anyone tell me how to do it (or point me to an URL that does)? Thanks

  Read the article

• Block P2P traffic on a Linksys router WRT54G with tomato firmware

  - by Kami

  Hi, I'm running a small wireless network (6 to 10 users) on a Lynksys WRT54G with tomato firmware sharing an internet connection. I don't want the users to download files with bittorrent (mainly used) and other p2p apps. I've also found some solutions about lowering p2p traffic priority using QoS. I really need to BAN p2p traffic. Does anyone know how to setup some rules to deny that kind of traffic ? I've tried to setup an Access Restriction Rule: But it's not working at all ...

  Read the article

• Block P2P traffic on a Linksys router WRT54G with Tomato firmware

  - by Kami

  I'm running a small wireless network (6 to 10 users) on a Linksys WRT54G with Tomato firmware sharing an Internet connection. I don't want the users to download files with BitTorrent (mainly used) and other P2P apps. I've also found some solutions about lowering P2P traffic priority using QoS. I really need to ban P2P traffic. Does anyone know how to setup some rules to deny that kind of traffic? I've tried to setup an Access Restriction Rule: However it's not working at all.

  Read the article

• WRTP54G Bypass Login Admin

  - by vonhogen

  I've been trying to log into my WRTP54G router, but I forgot the password. Is there any way to temporarily disable the login like for the wrt54g: http://www.velocityreviews.com/forums/t519535-help-my-linksys-wrt54g-router-was-broken-into-using-the-curl-command.html If anyone has this router, could they examine the page to turn off admin login, and see what I would need to send in a POST request?

  Read the article

• Where can I find old versions of linksys router firmware?

  - by Doug T.

  Hello everyone, I've had a headache of a weekend after upgrading to the latest firmware for my wrt54g. Suffice it to say I'm not satisfied with the latest version. Now I'm looking around for the previous version of the firmware out there on the interwebs and am having trouble. I noticed that linksys at one point had an ftp site: ftp://ftp.linksys.com. There you could find old firmware for your device. It now appears defunct. Does anyone know where I could find old firmware versions for my wrt54g router?

  Read the article

• Configuration of Home Network

  - by Wen Jie

  Previously my home network is as follows Speedtouch ST536 -> Linksys WRT54G But now as I have upgraded my internet subscription. My service provider gave me a "2Wire 2701 HGV" modem. I was wondering if it is possible to put the "2Wire" as an access point. So I might have a configuration as follows? Room Living Room Speedtouch ST536 -> Linksys WRT54G {Wireless} 2Wire 2701 HGV Because I find that my signal is very weak. Is there any way for me to do that?

  Read the article

• Can't connect printer wirelessly to linksys wrt54g using WPS

  - by Mark J Seger

  I've already blown over 1/2 day on this. I keep checking and rechecking my router settings and they agree with what the documentation says for my brand new HP4620 printer. Supposedly I just tell the router to listen for connections and tell the printer to connect. It fails every time! Further, I have also read some opinions that when things are not configured correctly the linksys will disable WPS and it looks like that's happening as well. Further, it's causing other wireless devices in my house to lose there connectivity until I re-enable WPA networking on the router. Has anyone been here before? This is driving me crazy... -mark

  Read the article

• How do I revert back to official Linksys firmware from dd-wrt on WRT56G2 v1?

  - by Chris Moore

  I've been having trouble with dd-wrt on my Linksys WRT56G2 v1 router and want to go back to the stock Linksys firmware for it. The router has only 2MB of flash memory, and so I'm running the 'micro' version of dd-wrt. My question is what is the best way to do that? I could use the http://router/Upgrade.asp dd-wrt "firmware upgrade" web interface to do it, in which case there's a dropdown menu choice for "After flashing, reset to": "don't reset" or "reset to default settings". Which should I pick? Some people say that I should use a program called tftp.exe instead. I can probably gain access to a Windows machine if this is necessary. Which of these is the way to proceed? I don't want to brick the router if at all possible! Note: I used the 'wrt54g' tag because I wasn't allowed to create a 'wrt54g2' tag due my low rep here.

  Read the article

• How to set WAN side buffers for WRT54GL running Tomato Firmware

  - by Vickash

  I've recently set up a machine running m0n0wall to try and fight buffer bloat and do some traffic shaping. It was more convenient (geographically speaking) to connect the cable modem directly to my old WRT54GL, then pass everything to the m0n0wall machine and have that do the real routing work. It took a bit of work, but it's working pretty well. I have a cable connection. I have m0n0wall set up to utilize only 90% of the specified speed of my subscription, which is fine. But I've noticed that at certain times of the day (possibly when my true bandwidth drops below that 90%), there's more latency if the connection is used heavily, and traffic shaping doesn't seem to work as well. I suspect this is caused by the buffers on the WRT54GL still being unnecessarily large. If the connection is working as expected, they won't get filled, but in times of reduced bandwidth they would. Does anyone know the command I need to execute, on the WRT54GL running Tomato Firmware, to reduce the buffers on the WAN interface to the minimum size possible?

  Read the article

• Linksys WRT54Gx as Repeater Bridge

  - by Robert Koritnik

  I have a Linksys WRT54Gx router with DD-WRT software working fine. But. Is it possible to use it as a Repeater Bridge when the host router isn't configured to be in the default 192.168.1.1 subnet? I've set everything from these instructions. I've also tried setting repeater router's IP address to be inside host's subnet, setting Gateway + DNS IP addresses... But It still didn't work. Client machines connecting to second router (my Linksys) were configured to use DHCP and also static IPs within host's subnet. Nothing worked. Can anyone tell me how to configure it to make it work?

  Read the article

• LinkSys router suddenly cannot get an IP address

  - by user43208

  I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

  Read the article

• Dual WAN port on a WRT54GL

  - by pufferfish

  Is it possible to reconfigure one of the LAN ports on a WRT54GL (running Tomato firmware) to act as a second WAN port? I have the following networks: PPOE connection to ADSL modem (works fine on the normal WAN port) WiFi neighbourhood network (in 178.X.X.X range), via a Mikrotik routerboard which I'd like to put on the WAN side of the router. I'd then like to set up routing so than some traffic (172.X.X.X) is routed to the Mikrotik and the rest to the ADSL modem. p.s. for practical reasons, I can't use the Mikrotik as the firewall/router. Edit: It seems this can be done by editing iptables, can someone tell me exactly how?

  Read the article

• unable to access Internet by wireless but can by cable

  - by Jeff King

  i'M GOING MAD! UNtil last friday I had been successfully using wifi with the supplier as VIRGIN through their Motorola SB 4200 cable Modem and the wireless router being the Linksys WRT 54G router. Supported were three lap tops and an EPSON 510W printer and this had been running with no issue for about 3 years. Back to last friday, we started suffering significant delays and then the network collapsed with no wireless access. I was able to connect a single laptop direct to the cable modem and internet access was restored to just that one device. I thought that the problem was the router so I tried a backup D-Link device with no success. I have subsequently bought another cable modem AND a netgear router plus addidtional ethernet cables but with no success. The best that happens is that the signal appears good but I cannot get access to the internet. A yellow question mark appears on the 'gradient' icon. Each laptop and router works elsewhere so I'm stumped. Mind you I am a real novice so I'm not surprised. Please can anyone tell me what I'm doing wrong?

  Read the article

• DD-WRT - Where's the best place to get a LinkSys WRT54G V1.0?

  - by Giffyguy

  Looking for the initial release of the LinkSys WRT54G, not V1.1 or V2.0 or anything like that. If it comes with DD-WRT pre-installed, even better. That being said, I suppose a side question would be whether SU recommends different hardware. After all, DD-WRT may have been originally built for the WRT54G and the WRT54Gv1.0 may have better hardware than any of the successive models, but it's still fairly dated. Are there newer routers that are more stable or performant with DD-WRT?

  Read the article

• How to connect a Win XP PC and Win 7 PC with a Linksys WRT54G Router to a PPPOE connection ?

  - by ChristianM

  I have two PCs and a WRT56G Router. My provider is a PPPOE connection (username and password). I can connect my Windows 7 easily. Even if I choose Auto or PPPOE on the router's configuration. Maybe because this one had the connection in the first place with the username and password set up. But I can't connect the Windows XP PC. Actually it does connect in a way, but it receives and sents just a few packages. I can actually see in My Network Places how many packages does the Gateway make and it's a big difference. And it won't open any page. How should I set up the router so I can give enough bandwith to the Windows XP PC ? I've seen another problem that I forgot to mention. The router can't connect with the pppoe settings. I don't know why, but with Auto DHCP setting and my Windows 7 connected with pppoe settings works. EDIT2: I've installed Win 7 on the other PC so I won't have any problem of compatibility betwen them. But I still can't connect the router with PPPOE settings to the internet. It looks like this: http://img641.imageshack.us/img641/9780/capturefba.png If you need any other screens or info, please tell me.

  Read the article

• Do I need to create static routes for my home network?

  - by SZU

  50.x.x.x assigned by Frontier 192.168.1.1 Actiontec (FiosModem/Router) 192.168.1.2 Voip 192.168.1.3 DLINK/DIR615 (WirelesRouter) 192.168.1.3 assigned by Actiontec 192.168.2.1 DLINK DIR615 (Hardwired to Actiontec) 192.168.2.194 Android 192.168.2.195 Vista-PC1 192.168.2.196 WIN7-PC2 192.168.2.197 Linksys-1 WRT54G/DDWRT(WirelessClient) 192.168.2.198 Linksys-2 WRT54G/DDWRT(WirelessClient) 192.168.2.199 DSi 192.168.2.197 assigned by DLINK 192.168.3.1 Linksys-1 WRT54G/DDWRT 192.168.3.100 Vista-PC3 192.168.2.198 assigned by DLINK 192.168.4.1 Linksys-2 WRT54G/DDWRT 192.168.4.100 Ubuntu-PC4 Above is my current setup. All PCs have Internet access. PC3 and PC4 cannot see each other and PC1/PC2 cannot see PC3/PC4. Do I need static routes between PC3 & PC4, PC1/PC2 & PC3/PC4? If how do I create the static routes?

  Read the article

• Strange network connectivity problem

  - by Marc

  Here is my network connectivity: cable modem | |(WAN) wrt54g (default gateway, 192.168.1.1) -- earth |(LAN) | Simple Switch1 | | | | | SimpleSwitch2- neptune | | | | mars mercury | |- venus | |- laptop | saturn (Windows AD DC) simpleSwitch2 was hanging off the wrt54g. I moved it to SW1 during troubleshooting. Nothing described below was any different. earth is connected via wireless to the wrt54g. I can ping from laptop to mars, neptune & mercury. I can ping from earth to venus, saturn & laptop. However, pinging mars, mercury or neptune from earth gives the following result. Pinging mars.XXX.XXX [192.168.1.105] with 32 bytes of data: Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Reply from 192.168.1.122: Destination host unreachable. Ping statistics for 192.168.1.105: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), .122 is the address of the machine from which I am pinging. earth is a Vista machine. Windows firewall is off. saturn is my DNS & DHCP server. Can anyone give me any ideas what the h*ll is going on? Clearly the topology is a factor And yes, I am a space geek.

  Read the article

1 2 3 4  | Next Page >