Search Results

Search found 28 results on 2 pages for 'wvdial'.

Page 1/2 | 1 2  | Next Page >

  • How to install wvdial without getting the following error?

    - by chndn
    When I ran the command: sudo apt-get install wvdial I got this error message : error p@p:~$ sudo apt-get install wvdial Reading package lists... Done Building dependency tree Reading state information... Done Package wvdial is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package wvdial has no installation candidate p@p:~$ So how can I install wvdial? I don't have access to internet from Ubuntu for direct installation. Please help

    Read the article

  • Ubuntu 12.04 share the internet over WiFi from wvdial?

    - by Sour Lemon
    I have just installed Ubuntu 12.04 on a separate partition on my hard drive so I can dual boot to either Windows 7 or Ubuntu. I am living in Japan and so I'm using a mobile broadband USB device called "Softbank C02LC". By default it seems that this device isn't recognised so I did the following: Terminal: sudo su nano /usr/bin/usbModemScript Nano: #!/bin/bash echo 1c9e 9900 > /sys/bus/usb-serial/drivers/option1/new_id Terminal: chmod +x /usr/bin/usbModemScript nano /etc/udev/rules.d/option.rules Nano: ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/usr/bin/usbModemScript" ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/sbin/modprobe option" which made the device visible from the network manager etc. However even though I set up my details correctly when I created a new connection (Correct username, APN etc) as soon as I try to connect it almost immediately disconnects. Because of this I then followed the instructions at this site: http://debugitos.main.jp/index.php?Ubuntu%2F%A5%E2%A5%D0%A5%A4%A5%EB%A5%A4%A5%F3%A5%BF%A1%BC%A5%CD%A5%C3%A5%C8 And I ended up using the c02lc_connect script at the bottom of the page to connect to the internet. The file contains the following bash script: #!/bin/sh usbinterfece=/dev/ttyUSB2 VID=1c9e PID=9900 WRONG_PID=f000 LSUSB=/usr/sbin/lsusb GREP=/bin/grep MODPROBE=/sbin/modprobe SWITCH=/usr/sbin/usb_modeswitch SWITCH_D=/etc/usb_modeswitch.d WVDIAL=/usr/bin/wvdial SLEEP=/bin/sleep SUDO=/usr/bin/sudo WHICH=/usr/bin/which switch_config="$SWITCH_D/$VID:$WRONG_PID" if ! [ -x $WVDIAL -a -x $SWITCH ]; then echo "Install wvdial and usb_modeswitch." exit 0 fi check_usb() { local vid="$1" local pid="$2" ($LSUSB | $GREP "$vid:$pid") } if ! (check_usb "$VID" "$PID"); then echo "Cannot find modem device..." if (check_usb "$VID" "$WRONG_PID") && ( [ -f "$switch_config" ] ); then echo "The device is attached but its mode is wrong." echo "Try usb_modeswitch..." $SUDO $SWITCH -c "$switch_config" $SLEEP 1 if (check_usb "$VID" "$PID"); then echo "Successfully switched the mode." else echo "Failed to switch the mode..." exit 1 fi else exit 1 fi fi if [ ! -c "$usbinterface" ]; then $SUDO $MODPROBE usbserial vendor=0x$VID product=0x$PID $SLEEP 2 fi $SUDO $WVDIAL which works completely fine - no problems what-so-ever. But we also have 1 more laptop here which I need to share the internet connection with. In Windows 7 I do this with the Connectify program, and in Ubuntu I have seen that you can do things like set up hotspots etc. But because I am using WvDial I am not sure how I would share the internet. I am only beginning to use Ubuntu but unfortunately until I can figure out how to share the internet over WiFi when connected via WvDial I have to stick with Windows. If you have any ideas on how to do this it would be much appreciated!

    Read the article

  • How do I configure wvdial to connect using a micromax 353g usb modem?

    - by user72209
    I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

    Read the article

  • What is the garbage text that is being printed by wvdial in terminal?

    - by Hrishi
    When I dial using wvdial, sometimes it prints some garbage text into the terminal. This is not happening every time, but in the garbage text I can see some readable strings which is often irc logs(from xchat) or GET requests from the browser. One of my friend told me that this is probably something it's reading from /dev/random for Random entropy, but I couldn't find any supporting information. What is this text, and why is it being printed to the terminal? See the below picture for an example:

    Read the article

  • UBUNTU's Network Connection Manger can't detect Huawei ETS2051 Modem device!

    - by Doctoa
    I have a modem device called Huawei ETS2051 and the Network Connection Manger can't detect it, but when I use Gnome-PPP it work fine but the problem is when I use Gnome-PPP; apps like Ubuntu software Center Can't reconice that's Iam connecting to the Internet so the app is just act like it's offline while other apps like web browsers and IM's work good under Gnome-PPP. any way what I want is to have a Full Ubuntu experince by making The Network Connection Manger detect my ETS2051. I have another 3G USB modem and The Network Connection Manger detect it and it's work just fine but the internet price for this one is high and I can't effort it so am count on that ETS2051 modem as you can see for it's low price and stable internet speed that satesfy my needs. More information: Gnome-PPP is a GUI for wvdial. the ETS2051 modem use a serial USB port. I have a Windows driver CD for the device. I have also find This qustion about the software Center acting like it's offline around wvdial and there's this launchpad bug. and am really insest to use Ubuntu Software Center so please no other software manger apps recomendation... I've also this Genius ColorPage HR6X Slim scanner that's Ubuntu can't detect it, so if you interset you can check and answer the qustion from here...

    Read the article

  • dependency problems now not able to install or remove any package

    - by Manish gour
    I was installing wvdial, now I do not need that, but because of that machine got problem with dependencies, and due to that I am unable to install any package, please help, Below is my stack trace: The following packages have unmet dependencies: libqt3-mt:i386: Depends: libjpeg62 but it is not installed libusb-dev: Depends: libusb-0.1-4 (= 2:0.1.12-14) but 2:0.1.12-20 is installed dependency problems:i386: Depends: libc6 (= 2.4) but 2.15-0ubuntu10.4 is installed Depends: libuniconf4.4 but it is not installed Depends: libwvstreams4.4-base but it is not installed Depends: libwvstreams4.4-extras but it is not installed Depends: libxplc0.3.13 but it is not installed Depends: ppp (= 2.3.0) but it is not installed

    Read the article

  • Wvdial randomly drops 3G connection - How to auto-reconnect?

    - by askvictor
    I'm using a 3G modem for a router running Ubuntu server 10.04. I have the connection established using wvdial, which works successfully, but sometimes the connection drops. I would like it to auto re-connect. I've set the "auto reconnect" in wvdial.conf, but this does not seem to work. Any ideas? Am I missing a config option, or should I try writing a script which polls the network status and resets if ppp0 has gone down?

    Read the article

  • Using Ubuntu with a dial-up connection

    - by Robert Heller
    Is it possible to install Ubuntu on a machine with only a dial-up connection? That is, does the Ubuntu install CD come with everything needed to set up an Internet connection using a dial-up modem (I have a USRobotics Courier V.Everything connected to a RS232 port on a Lava Quattro-PCI). I presently run CentOS (5.9), which does include support for dialup Internet access out-of-the-box (all of the modules for dialup are on the distro DVD). When I ran the UBuntu CD (12.04.1 desktop), there was no sign of dial-up Internet support. Am I faced with a chicken or egg problem?

    Read the article

  • Help with Dial Up

    - by iSeth
    I am trying to set up a computer for my friend that has dial up. The problem is nothing I try can detect the modem. GnomePPP can't find it and I can't figure Kppp out. I've been looking all over the net on my ethernet trying to find an answer but I keep getting routed back here. I have also tried using scanModem and it finds something like Conexant Systems, Inc. HCF 56k Data/Fax/Voice Modem but the rest of it is really confusing. I've also tried this but I'm not very terminal savvy and it didn't work. It seems like I have to compile a driver but I don't know which one or how to do it. I have also tried multiple modems. Any help would be appreciated. Thanks EDIT: scanModem thinks the modem is disabled on startup. EDIT: I reinstalled Ubuntu but the problem persists.

    Read the article

  • How to configure TATA Photon+ EC1261 HUAWEI

    - by user3215
    I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help. Also, it is very slow, but I was told that I would see speeds up to 3.1MB. I dont have wvdial installed and cannot install it from apt as I'm not connected to internet Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices). output of wvdialconf /etc/wvdial.cof: #wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" output of wvdial: #wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CRM=1 AT+CRM=1 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Oct 16 15:30:47 2010 --> Pid of pppd: 5681 --> Using interface ppp0 --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> local IP address 14.96.147.104 --> pppd: (u;[08]@s;[08]`{;[08] --> remote IP address 172.29.161.223 --> pppd: (u;[08]@s;[08]`{;[08] --> primary DNS address 121.40.152.90 --> pppd: (u;[08]@s;[08]`{;[08] --> secondary DNS address 121.40.152.100 --> pppd: (u;[08]@s;[08]`{;[08] Output of log message /var/log/messages: Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180 Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15 Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes. Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes. Oct 16 15:29:58 desktop pppd[5119]: Connection terminated. Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0 Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0 Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2 Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:48 desktop pppd[5681]: local IP address 14.96.147.104 Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223 Oct 16 15:30:48 desktop pppd[5681]: primary DNS address 121.40.152.90 Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100 EDIT 1 : I tried the following sudo stop network-manager sudo killall modem-manager sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 & sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 & Output of mm.log: #vim ~/mm.log: ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Option ** Message: Loaded plugin Huawei ** Message: Loaded plugin Longcheer ** Message: Loaded plugin AnyData ** Message: Loaded plugin ZTE ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Sierra ** Message: Loaded plugin Generic ** Message: Loaded plugin Gobi ** Message: Loaded plugin Novatel ** Message: Loaded plugin Nokia ** Message: Loaded plugin MotoC Output of nm.log: #vim ~/nm.log: NetworkManager: <info> starting... NetworkManager: <info> modem-manager is now available NetworkManager: SCPlugin-Ifupdown: init! NetworkManager: SCPlugin-Ifupdown: update_system_hostname NetworkManager: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet NetworkManager: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e NetworkManager: SCPlugin-Ifupdown: addresses count: 1 NetworkManager: SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses NetworkManager: SCPluginIfupdown: management mode: unmanaged NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1) NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found. NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) @

    Read the article

  • Using 3G/UMTS in Mauritius

    After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

    Read the article

  • GNOME PPP doesn't connect

    - by Motorhead
    I am a new ubuntu user and connect to the internet using wi-fi broadband on my notebook. But I need to setup a dial-up connection through my phone which can keep me online while I travel. I have tried connecting to dial-up using pppconfig, wvdial and gnome-ppp. I do not know whether they use the same files for connecting but I have only been able to connect using Gnome-ppp. But the connection is intermittent and disconnects every five seconds or so. The exit code is 16 which I checked in man and got to know that the modem hangs itself up. I am connecting my phone to ubuntu as a usb modem. And as I am new I might have skipped a step or two. Please suggest a solution or an alternative to this. I have put down the Gnome-ppp log. Thanks. --> WvDial: Internet dialer version 1.61 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Sending: ATM1L3DT*99***1# --> Waiting for carrier. ATM1L3DT*99***1# CONNECT --> Carrier detected. Waiting for prompt. ~[7f]}#@!}!}$} }=}!}$}%\}"}&} } } } }#}%B#}%}%}&}*urW}'}"}(}"mX~ --> PPP negotiation detected. --> Starting pppd at Sat Apr 28 21:55:55 2012 --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 2459 --> Using interface ppp0 --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> Disconnecting at Sat Apr 28 21:56:01 2012 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 5 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Sending: ATM1L3DT*99***1# --> Waiting for carrier. ATM1L3DT*99***1# CONNECT --> Carrier detected. Waiting for prompt. ~[7f]}#@!}!Q} }=}!}$}%\}"}&} } } } }#}%B#}%}%}&}*u69}'}"}(}"#W~ --> PPP negotiation detected. --> Starting pppd at Sat Apr 28 21:56:07 2012 --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 2470 --> Using interface ppp0 --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> Disconnecting at Sat Apr 28 21:56:09 2012 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 10 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized. --> Sending: ATM1L3DT*99***1# --> Waiting for carrier. ATM1L3DT*99***1# CONNECT --> Carrier detected. Waiting for prompt. ~[7f]}#@!}!@} }=}!}$}%\}"}&} } } } }#}%B#}%}%}&}*uvM}'}"}(}"p}$~ --> PPP negotiation detected. --> Starting pppd at Sat Apr 28 21:56:20 2012 --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 2481 --> Using interface ppp0 --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> pppd: xu! --> Disconnecting at Sat Apr 28 21:56:25 2012 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 20 seconds --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Modem initialized.

    Read the article

  • My datacard goes online but doesn't gives internet access (Fedora 14).

    - by Harsh
    I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet. The reply to dmesg | grep -e 'tty' -e 'modem' is: [ 0.000000] console [tty0] enabled [ 11.098238] USB Serial support registered for GSM modem (1-port) [ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected [ 11.102170] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 11.102207] option 6-1:1.1: GSM modem (1-port) converter detected [ 11.102334] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 11.102364] option 6-1:1.2: GSM modem (1-port) converter detected [ 11.102488] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 11.102522] option 6-1:1.3: GSM modem (1-port) converter detected [ 11.102643] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 11.102672] option 6-1:1.4: GSM modem (1-port) converter detected [ 11.102793] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB4 [ 11.103074] option: v0.7.2:USB Driver for GSM modems Can anyone tell me what shall I do?

    Read the article

  • Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

    - by ubunsteve
    I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

    Read the article

  • Network manager broadband modem BUG

    - by Souheil Hmida
    just upgraded to ubuntu 12.10 from 12.04 using wvdial to connect to the internet (network manager doesn't detect my modem Huawei E367 ), though the new network manager detected my modem and asked me the enter the PIN, it doesn't connect, it shows my provider (Orange TN) and the signal (2 bars) but dosn't connect and I can't clic on the name of my broadband (ORANGE TN) . Just hoping that there will be a bug-fix for it or any other solution so I can go back to using the network manger :)

    Read the article

  • Sharing a modem INTERNET on LAN

    - by Shadyabhi
    My computer is already connected to a 100Mbps LAN. I can use wvdial to connect to internet using a modem when I have my LAN disconnected. Now, I want to share this modem internet to one of the ip address available on LAN say 10.100.99.56.. First of all, can it be done? How do I go about doing that?

    Read the article

  • Make a Phone ring from BASH through a HUAWEI e220

    - by microspino
    Hello, I have a Debian Linux system with a HUAWEI e220 on /dev/ttyUSB0. I'd like to make It ring a generic GSM phone for just one time. I'm doing this because I'd like to build an embedded system that fires some special behavior by a single GSM phone ring. How can I do It? I've tried wvdial but I receive always a "NO CARRIER" answer when I try to send It an "ATDT XXX-phone-number-to-dial-XXX" command.

    Read the article

  • Cannot connect to Onda GSM phone using network-manager

    - by marcobra
    On Oneiric unstable fully updated/upgraded using network-manager broadband connection with: ID 19d2:1015 ONDA Communication S.p.A. I want some hints to make a Onda GSM usbkey 19d2:1015 work? route show me Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 usb0 link-local * 255.255.0.0 U 1000 0 0 usb0 It connects and the usb0 device get ip-address from the provider but I cannot get webpages (also typing a known ip in firefox) It seem to be something about routing default gw, there is no active firewall on this pc btw, all works using sakis3g or wvdial or gnome-ppp

    Read the article

  • Ubuntu Software Center not recognising my network connection

    - by Chethan S.
    I have installed Oneiric Beta on my laptop. As my Mobile Broadband refused to connect to Internet through network manager I'm now using wvdial to connect. Hence the network manager shows I'm not connected to any networks. When I try to install software from Ubuntu Software Center the 'Install' option remains disabled and under reviews section it says no network connection! As a workaround I kept installing applications from terminal which works fine. Therefore, my question is how to make Software Center recognize that I am connected to Internet?

    Read the article

  • Unable to connect via Mobile Broadband - But its detected - 12.10

    - by Rexford
    Previously (on ubuntu 12.04), i will just connect my 3G mobile broadband modem, and will start browsing after enabling it and going through the setup process. However, on the 12.10, I'm able to setup my connection, but it doesn't connect to the internet. All settings are okay. I've tried two different network providers in Ghana, still, i'm not able to connect. At times, i'm notified that, its connected to the "home network" of the service provider, but disconnects in less than 10 seconds. Is it supposed to be a bug? I've been reading about the wvdial, but I'm wondering something that used to be possible by "default" in Ubuntu should now be "configured" via a software. Help!

    Read the article

  • Cannot connect to Internet on 11.04 using BSNL EVDO Prithvi Card

    - by Joy
    I cannot connect to Internet using BSNL EVDO Prithvi data card. Went through some websites that offered help, installed wvdial package and tried again, but was unsuccessful. I have Read that, Ubuntu 11.04 automatically detects Data Card, You only need to configure "Network Manager" and it will work, I did exactly that, but the result is same. The OS detects the data card, and the presence of network , but it cannot login. I have read in some forums that Ubuntu 11.04 does not have support for BSNL EVDO Prithvi, is it true? I re-checked the "User ID" and "Password". Its working on Windows. Please help me fix this.

    Read the article

  • CMOTECH D-50 modem installation in Ubuntu 12.04

    - by Ricardo
    I have recently upgraded from 10.04 to 12.04. I had installed a 3G D-50 modem from CMOTECH. The program for Debian is provided by a Swedish company (ice.net). Usually after some mambo jambo of installung the libg++ libraries requested you can install it and runned in Ubuntu 8.04, 9.04, 10.04 and as far as I know in 11.04. When I upgraded and I click on the icon of ice.net it worked. However, I noticed that the usb D-50 modem was never mounted as usb and it didn't show up in the Lauchnpad or workspace (as when you plug a usb memory stick or another HD). I moved the icon from place in the launchpad and since when I click on the ice.net icon the same message appears: "please plug in your modem". The modem works (I've tested in Windows after this) and it blinks blue (sign that it works and picks up signal). If I type lsusb then I see that Ubuntu sees it on BUS address 006: Bus 006 Device 003: ID 16d8:6803 CMOTECH Co., Ltd. CNU-680 CDMA EV-DO modem I've tried wvdial without success. How can I get the D-50 usb modem mounted as in the previous versions of Ubuntu ?. Any help will be much appreciated. bests. Ricardo

    Read the article

  • connecting to bsnl wll, with huawei fixed wireless modem with connected to usb port on linux mint.

    - by Rakesh
    On windows, when I plugged in the usb connector, to the device was recognized as a mass storage device and installed all the drivers, to my computer, then the device, automatically restarted and started behaving like a modem, I'm writing this post, using the same modem, through windows... On linux mint (debian kernel, similar to ubuntu 8.10), the device is recognized as a mass storage device, some times, but, has no programs, useful for linux... When I use the modem on windows and restart the computer and login to linux, the device shows up as "not yet configured" in the terminal command "lsusb"... I googled a lot for solutions, tried many things, atlast, configured it and run the command "wvdial". But, get the error, that the modem is not responding, at last ! :'( Please help me out... Many more people are facing this problem, as I could discover, when I googled for it. this is the website address of huawei, the company of my modem... "www.huawei.com" Specification: model: ETS1220 FEQ: 800M Thank you.

    Read the article

  • Huawei e303c data-card not working for Ubuntu 11.04?

    - by Umashankar
    Cheers to you. I got a problem in making a Mobile-BroadBand connection in Ubuntu 11.04, using 'Huawei e303c' usb data-card. I'm using Tata Docomo 3G sim-card (India, circle: Maharastra). My observations: 1.) I installed the device's driver 'Mobile-Partner For Linux'(which came up with the device). But it is not detecting my device. 2.) In Network Manager, Adding a Mobile-BroadBand connection is not able to detect the device (with or without the device's driver installed). 3.)I tried softwares like usb_modeswitch, gnomeppp, wvdial, sakis3G and followed their guidelines. These too didn't work. 4.) Without the driver, the system is able to identify the device (Mobile-Partner icon comes-up, that leads to driver setup files). But after installing the driver, nothing comes-up there. 5.) In all the above cases, when 'lsusb' cmd is fired, the prompt shows the connected data card (as 'DEVICE_ID:VENDOR_ID Huawei Technologies Ltd.,'). This is my problem. Give a solution to get my device connected. -Umash

    Read the article

  • Dialing into multiple PPP connections on Ubuntu

    - by sharjeel
    I have multiple 3G USB based Modems. I would like them to keep connected simultaneously, NOT necessarily aggregating their bandwidth; a separate intelligent application would manage their utilization effectively. However I am running into problem of setting up proper routes for the ppp0,ppp1 interfaces: when one of them connects, other's entries in the routing table get updated so it is no more usable. If I reconnect the second one, it would override the first one's routing entries. If I do it over and over, sometimes both of them's entries disappear while in rare cases the two work well. I have tried it both using NetworkManager as well as WVDial but issue pops up in both of these. Perhaps both of them use same PPP dialer at the backend and thats why this issue appears. What is the proper solution to make them work together? In the long run, I'd also like them to automatically dial in once USB gets connected.

    Read the article

1 2  | Next Page >