Search Results

Search found 78 results on 4 pages for 'xander cage'.

Page 1/4 | 1 2 3 4  | Next Page >

  • Cage nuts - which way to insert them?

    - by Ingmar Hupp
    Cage nuts can be inserted (in square holes) either with the flaps horizontal or vertical. I've seen and used both methods, but am still not sure which is best. Is there a recommended way of inserting them? If so, why is it the best way? From my own experience, the horizontal way (on the left) seems slightly better for no other reason than making it easier to insert or pry out the cage nut in a full rack (with the units above and below being populated), for example when replacing cage nuts with a snap-in rail. Edit: Major vendors each seem to have their own preference too: Horizontal: IBM, Cisco, APC Vertical: HP (and Compaq), Sun/Oracle, Dell

    Read the article

  • How to get decent WiFi despite a virtual Faraday cage

    - by MT_Head
    One of my clients is the local branch of an international airline. They have a small office in the secured area behind the ticket counters, and timeshare space at the ticket counter. I need to add a ticket printer out front, which I cannot (for contract/liability reasons) attach to the shared computer at the counter; the only workable solution seems to be to put the printer and its attached computer on a cart and connect to the office's network via WiFi. So far, no problem - right? Well, the terminal has been getting a facelift, which - among other things - includes decorative stainless-steel panels along the wall behind the ticket counters. This paneling acts as a seriously effective barrier to WiFi! The office's WiFi router - a brand-new D-Link DIR-815, dual-band 802.11n - is just on the other side of the pictured wall, and twenty feet or so to the right. And yet the only way I can connect AT ALL on this side of the wall is to stick the USB adapter (on the end of an extension cable) right into the crack between panels... and even then I can only see the 5GHz network, and that very weakly. Has anyone else had experience with this sort of misguided interior decoration? Any ideas on how I can improve reception on the other side of the barrier? (Needless to say, physical modifications of the environment - tempting though they might be - are strictly no-go.)

    Read the article

  • replacement drive cage for power edge R710

    - by bumble_bee_tuna
    Hi I'm performance tuning a DB server its a Dell R710 there is a very significant I/O bottleneck. Unfortunately the server was purchased with the 6 x 3.5 inch sata configuration which doesn't give me the leeway I need to address the issue. Before going to DAS does anyone know if it is possible to purchase a replacement front drive enclosure ? I know the server is configurable with something like 12 or 16 2.5 inch drives and it appears to be modular ? I tired contacting dell but the offshore parts department reps are not very bright lol. Thanks.

    Read the article

  • When can a freely moving sphere escape from a ‘cage’ defined by a set of impassible coordinates?

    - by RGrey
    Hopefully there are some computational geometry folks here who can help me out with the following problem - Please imagine that I take a freely moving ball in 3-space and create a 'cage' around it by defining a set of impassible coordinates, Sc (i.e. points in 3-space that no part of the diffusing ball is allowed to overlap). These points reside within the volume, V(cage), of some larger sphere, where V(cage) V(ball). Provided the set of impassible coordinates, Sc, is there a computationally efficient and/or nice way to determine if the ball can ever escape the cage?

    Read the article

  • What is the difference between Static code analysis and code review?

    - by Xander
    I just wanted to know what is the difference between static code analysis and code review. How these two are done? What are the tools available today for code review/ static analysis of PHP. I also like to know about good tools for any language code review. Thanks in Advance. Xander Cage Note: I am asking this because I was not able to understand the difference. Please, I expect some answers than "I am Mr.Geek and you asked an irrelevant bla bla..... this is closed". I know this sounds mean. But I am sorry.

    Read the article

  • Generate lags R

    - by Btibert3
    Hi All, I hope this is basic; just need a nudge in the right direction. I have read in a database table from MS Access into a data frame using RODBC. Here is a basic structure of what I read in: PRODID PROD Year Week QTY SALES INVOICE Here is the structure: str(data) 'data.frame': 8270 obs. of 7 variables: $ PRODID : int 20001 20001 20001 100001 100001 100001 100001 100001 100001 100001 ... $ PROD : Factor w/ 1239 levels "1% 20qt Box",..: 335 335 335 128 128 128 128 128 128 128 ... $ Year : int 2010 2010 2010 2009 2009 2009 2009 2009 2009 2010 ... $ Week : int 12 18 19 14 15 16 17 18 19 9 ... $ QTY : num 1 1 0 135 300 270 300 270 315 315 ... $ SALES : num 15.5 0 -13.9 243 540 ... $ INVOICES: num 1 1 2 5 11 11 10 11 11 12 ... Here are the top few rows: head(data, n=10) PRODID PROD Year Week QTY SALES INVOICES 1 20001 Dolie 12" 2010 12 1 15.46 1 2 20001 Dolie 12" 2010 18 1 0.00 1 3 20001 Dolie 12" 2010 19 0 -13.88 2 4 100001 Cage Free Eggs 2009 14 135 243.00 5 5 100001 Cage Free Eggs 2009 15 300 540.00 11 6 100001 Cage Free Eggs 2009 16 270 486.00 11 7 100001 Cage Free Eggs 2009 17 300 540.00 10 8 100001 Cage Free Eggs 2009 18 270 486.00 11 9 100001 Cage Free Eggs 2009 19 315 567.00 11 10 100001 Cage Free Eggs 2010 9 315 569.25 12 I simply want to generate lags for QTY, SALES, INVOICE for each product but I am not sure where to start. I know R is great with Time Series, but I am not sure where to start. I have two questions: 1- I have the raw invoice data but have aggregated it for reporting purposes. Would it be easier if I didn't aggregate the data? 2- Regardless of aggregation or not, what functions will I need to loop over each product and generate the lags as I need them? In short, I want to loop over a set of records, calculate lags for a product (if possible), append the lags (as they apply) to the current record for each product, and write the results back to a table in my database for my reporting software to use. Any help you can provide will be greatly appreciated! Many thanks in advance, Brock

    Read the article

  • What algorithm to use to fill a KenKen square board with cages?

    - by JimmyBoh
    I am working on recreating KenKen, a popular math puzzle involving a blank grid that is divided into "cages". Each cage is just a collection of adjacent squares and has a clue which is generally a number and an operand, shown below: What type of algorithm would be best to fill the square with cages? Assume the maximum number of cells per cage would be 3 and the board is 4x4 in size, like in the example above.

    Read the article

  • Separate collision mesh model?

    - by Menno Gouw
    I want to have another go at 3D within XNA. What I have seen from some other games that they just have a separate very low poly model "cage" around the environment model. However I can not find any reference to this. I have not that much experience with XNA 3D either. Is it possible to have this cage within each of my environmental models already? Lets just say I call the mesh within the .FBX wall and col_wall. How would I call to these different meshes within XNA? The player would just have a tight collision cube around. To make it a bit more efficient I will be making divide the map up by cubes and only calculate collision if the player is in it. Question two: I can't find anywhere to do cube vs mesh collision. Is there a method for this? Or perhaps it is possible to build my collision cage out of cubes in the 3D app and on loading of the models in XNA replace them directly by cubes? So I could just do box to box collision which should be very cheap and still give the player the ability to move over ledges on the static models.

    Read the article

  • Having problems creating an array from XML data in Acrobat Javascript, please help if you can

    - by Kevin Minke
    I have a manually created array that already works example below: var PartsData = { 179: { ref:"", partNum: "201-2007-C00-00", descript: "System Monitor Card (Tracewell Only)", cage: "39764", qty: "1", SMR: "XBOZZ", UOC: "A" }}; Now this array above is is just one value in the array and it works fine. Here is the XML that I am trying to use to dynamically change the values. <?xml version="1.0" encoding="utf-8"?> <partsTables> <partsList> <part sheetNum="ta1"> <breakDownIndexNo>-1 </breakDownIndexNo> <referenceDesg/> <indent>20534220P01 </indent> <description/> <cage>TAC RI, GRADE-A SHOCK (TEC RACK), ALT P/N 72304-1</cage> <qtyPerAssy>23991 </qtyPerAssy> <smr>1 </smr> <uoc>ADODD </uoc> <blank/> </part> </partsList> </partsTables> I have this parsing just fine in Acrobat. Now I want to make the array work for me in using these values. if I have the following below it will work. Where part.item(i).indent.value equals the value of the indent node, etc. newArr = { 179: { ref: part.item(i).referenceDesg.value, partNum: part.item(i).indent.value, descript: part.item(i).cage.value, cage: part.item(i).qtyPerAssy.value, qty: part.item(i).smr.value, SMR: part.item(i).uoc.value, UOC: part.item(i).blank.value}}; As soon as I try to make the 179 value, which is in the breakDownIndexNo node, dynamic by using the direct part.item(i).breakDownIndexNo.value it will not compile. Acrobat is using javascript so I'm not sure why I can not get this to parse. I have tried to create a variable out of the breakDownIndexNo node and typed it to both a String and an Integer. this will let it create the array but it will not let me output from the array. newArr[indexNum].partNum gives me "no properties" where newArr[179].partNum if I were to manually set the index number to 179 will print out the value of part.item(i).indent.value. If any of you have an idea or an answer please let me know.

    Read the article

  • Is It Worth It To Learn Experimental Languages

    - by Xander Lamkins
    I'm a young programmer who desires to work in the field someday as a programmer. I know Java, VB.NET and C#. I want to learn a new language (as I programmer, I know that it is valuable to extend what I know - to learn languages that make you think differently). I took a look online to see what languages were common. Everybody knows C and C++ (even those muggles who know so little about computers in general), so I thought, maybe I should push for C. C and C++ are nice but they are old. Things like Haskell and Forth (etc. etc. etc.) are old and have lost their popularity. I'm scared of learning C (or even C++) for this same reason. Java is pretty old as well and is slow because it's run by the JVM and not compiled to native code. I've been a Windows developer for quite a while. I recently started using Java - but only because it was more versatile and spreadable to other places. The problem is that it doesn't look like a very usable language for these reasons: It's most used purpose is for web application and cellphone apps (specifically Android) As far as actual products made with it, the only things that come to mind are Netbeans, Eclipse (hurrah for making and IDE with the language the IDE is for - it's like making a webpage for writing HTML/CSS/Javascript), and Minecraft which happens to be fun but laggy and bipolar as far as computer spec. support. Other than that it's used for servers but heck - I don't only want to make/configure servers. The .NET languages are nice, however: People laugh if I even mention VB.NET or C# in a serious conversation. It isn't cross-platform unless you use MONO (which is still in development and has some improvements to be made). Lacks low level stuff because, like Java with the JVM, it is run/managed by the CLR. My first thought was learning something like C and then using it to springboard into C++ (just to make sure I would have a strong understanding/base), but like I said earlier, it's getting older and older by the minute. What I've Looked Into Fantom looks nice. It's like a nice middleman between my two favorite languages and even lets me publish between the two interchangeably, but, unlike what I want, it compiles to the CLR or JVM (depending on what you publish it to) instead of it being a complete compile. D also looks nice. It seems like a very usable language and from multiple sources it appears to actually be better than C/C++. I would jump right with it, but I'm still unsure of its success because it obviously isn't very mainstream at this point. There are a couple others that looked pretty nice that focused on other things such as Opa with web development and Go by GOOGLE. My Question Is it worth learning these "experimental" languages? I've read other questions that say that if you aren't constantly learning languages and open to all languages that you aren't in the right mindset for programming. I understand this and I still might not quite be getting it, but in truth, if a language isn't going to become mainstream, should I spend my time learning something else? I don't want to learn old (or any going to soon be old) programming languages. I know that many people see this as something important, *but would any of you ever actually consider (assuming you didn't already know) FORTRAN? My goal is to stay current to make sure I'm successful in the future. Disclaimer Yes, I am a young programmer, so I probably made a lot of naive statements in my question. Feel free to correct me on ANYTHING! I have to start learning somewhere so I'm sure a lot of my knowledge is sketchy enough to have caused to incorrect statements or flaws in my thinking. Please leave any feelings you have in the comments.

    Read the article

  • Is it worth to learn Experimental Languages?

    - by Xander Lamkins
    I'm a young programmer who desires to work in the field someday as a programmer. I know Java, VB.NET and C#. I want to learn a new language (as I programmer, I know that it is valuable to extend what I know - to learn languages that make you think differently). I took a look online to see what languages were common. Everybody knows C and C++ (even those muggles who know so little about computers in general), so I thought, maybe I should push for C. C and C++ are nice but they are old. Things like Haskell and Forth (etc. etc. etc.) are old and have lost their popularity. I'm scared of learning C (or even C++) for this same reason. Java is pretty old as well and is slow because it's run by the JVM and not compiled to native code. I've been a Windows developer for quite a while. I recently started using Java - but only because it was more versatile and spreadable to other places. The problem is that it doesn't look like a very usable language for these reasons: It's most used purpose is for web application and cellphone apps (specifically Android) As far as actual products made with it, the only things that come to mind are Netbeans, Eclipse (hurrah for making and IDE with the language the IDE is for - it's like making a webpage for writing HTML/CSS/Javascript), and Minecraft which happens to be fun but laggy and bipolar as far as computer spec. support. Other than that it's used for servers but heck - I don't only want to make/configure servers. The .NET languages are nice, however: People laugh if I even mention VB.NET or C# in a serious conversation. It isn't cross-platform unless you use MONO (which is still in development and has some improvements to be made). Lacks low level stuff because, like Java with the JVM, it is run/managed by the CLR. My first thought was learning something like C and then using it to springboard into C++ (just to make sure I would have a strong understanding/base), but like I said earlier, it's getting older and older by the minute. What I've Looked Into Fantom looks nice. It's like a nice middleman between my two favorite languages and even lets me publish between the two interchangeably, but, unlike what I want, it compiles to the CLR or JVM (depending on what you publish it to) instead of it being a complete compile. D also looks nice. It seems like a very usable language and from multiple sources it appears to actually be better than C/C++. I would jump right with it, but I'm still unsure of its success because it obviously isn't very mainstream at this point. There are a couple others that looked pretty nice that focused on other things such as Opa with web development and Go by GOOGLE. My Question Is it worth learning these "experimental" languages? I've read other questions that say that if you aren't constantly learning languages and open to all languages that you aren't in the right mindset for programming. I understand this and I still might not quite be getting it, but in truth, if a language isn't going to become mainstream, should I spend my time learning something else? I don't want to learn old (or any going to soon be old) programming languages. I know that many people see this as something important, *but would any of you ever actually consider (assuming you didn't already know) FORTRAN? My goal is to stay current to make sure I'm successful in the future. Disclaimer Yes, I am a young programmer, so I probably made a lot of naive statements in my question. Feel free to correct me on ANYTHING! I have to start learning somewhere so I'm sure a lot of my knowledge is sketchy enough to have caused to incorrect statements or flaws in my thinking. Please leave any feelings you have in the comments.

    Read the article

  • Correct way to handle path-finding collision matrix

    - by Xander Lamkins
    Here is an example of me utilizing path finding. The red grid represents the grid utilized by my A* library to locate a distance. This picture is only an example, currently it is all calculated on the 1x1 pixel level (pretty darn laggy). I want to make it so that the farther I click, the less accurate it will be (split the map into larger grid pieces). Edit: as mentioned by Eric, this is not a required game mechanic. I am perfectly fine with any method that allows me to make this accurate while still fast. This isn't the really the topic of this question though. The problem I have is, my current library uses a two dimensional grid of integers. The higher the number in a cell, the more resistance for that grid tile. Currently I'm setting all unwalkable spots to Integer Max. Here is an example of what I want: I'm just not sure how I should set up the arrays of integers of the grid. Every time an element is added/removed to/from the game, it's collision details are updated in the table. Here is a picture of what the map looks like on my collision layer: I probably shouldn't be creating new arrays every time I have to do a path find because my game needs to support tons of PF at the same time. Should I have multiple arrays that are all updated when the dynamic elements are updated (a building is built/a building is destroyed). The problem I see with this is that it will probably make the creation and destruction of buildings a little more laggy than I would want because it would be setting the collision grid for each built in accuracy level. I would also have to add more/remove some arrays if I ever in the future changed the map size. Should I generate the new array based on an accuracy value every time I need to PF? The problem I see with this is that it will probably make any form of PF just as laggy because it will have to search through a MapWidth x MapHeight number of cells to shrink it all down. Or is there a better way? I'm certainly not the best at optimizing really anything. I've just started dealing with XNA so I'm not used to having optimization code really doing much of an affect until now... :( If you need code examples, please ask. I'll add it as an edit. EDIT: While this doesn't directly relate to the question, I figure the more information I provide, the better. To keep your units from moving as accurately to the players desired position, I've decided that once the unit PFs over to the less accurate grid piece, it will then PF on a more accurate level to the exact position requested.

    Read the article

  • Datacenter Colocation Phone

    - by Kyle Brandt
    In my cage I don't get good enough phone reception. An phone that goes over the network also doesn't seem ideal for when I am working on the network. Do you people have traditional phones delivered to their cage? I'm wonder what my options are.

    Read the article

  • What is the process to fix track listing error on Spotify that is also wrong on the CD?

    - by dumbledad
    I've just been listening to The Complete John Cage Edition Volume 18: The Choral Works 1 but the track listing is wrong. (N.B. I'm not a Cage genius, but a new twitter friend is and pointed this out to me). The CD comes from a label called Mode and the track listing is also wrong on the CD so it's not just a Spotify DB thing. What database do Spotify use for their track listings and what is the correct process for getting it corrected when there is an error?

    Read the article

  • Transfer nearly an entire file system to a fresh install as smoothly as possible

    - by Xander
    I've got a friend who needs his computer working in just a few hours. His files are safe, however, he managed to corrupt his main install of Windows 7. My plan is to go in with a Linux disk, copy his C:\ do a backup drive I've got and then reinstall. Restoring many of his files will be pretty simple (such as documents and such), however, things such as applications won't transfer as easily. Is there any easy way to transfer applications such as MS Office (which he needs in the morning) or other commercial software packages without having to go through the hassle of locating the keys and reinstalling them completely? I don't think just moving them over will work just because of the fact that I'm sure much of that is stored in the registry (validation stuff and such). Anyways, quick responses would be super nice! Also, additional help would be great!

    Read the article

  • How do I diagnose a bottleneck in an Intel Atom based Ubuntu server?

    - by Jon Cage
    I have a small media server at home which has software raid and a gigabit link to the rest of my network. For some reason though, I only get ~10MB/s transfers when copying to/from the server. I use software RAID5 (mdadm) over 4 1TB disks. On top of that I then use LVM to give me a huge pool of disk space which is then split up into multiple partitions which can be resized as and when they need it. I'm guessing this it most likely the cause, but I'd like to know for sure where the root cause is. So, how can I benchmark network throughput (Windows 7 desktop <- Ubuntu server) and hard disk performance to try and identify where my bottleneck might be? [Edit] If anyone's interested, the motherboard is an Intel Desktop Board D945GCLF2. So that's a 300 series Atom processor with the Intel® 945GC Express Chipset [Edit2] I feel like such a fool! I just checked my desktop and I had the slower of the two onboard NICs plugged in so the server is probably not at fault here. Transferring a copy of ubuntu off the server I get ~35-40MB/s according to Windows 7. I'll do those HD tests when I get a chance though (just for completeness).

    Read the article

  • How do I enable write access for an sFTP only user under Ubuntu?

    - by Jon Cage
    I'm running Ubuntu 12.04 and am trying to configure a user to allow chroot'd sFTP connections to another section of the filesystem. I've added the following to my /etc/ssh/sshd_config file: Match Group mygroup X11Forwarding no AllowTcpForwarding no ForceCommand internal-sftp ChrootDirectory /home/%u I've set their home directory so that it's owned by root but has their group. I've created a mount --bind from /home/myuser/transfers to /my/filesystem which appears to be navigable. The problem I'm having is that I'm not able to write to any part of the filesystem which makes this pretty useless as an FTP server. What am I missing? What can I check?

    Read the article

  • What options are there to do a mail merge?

    - by Jon Cage
    I tried (and failed) to do a mail merge to send a generic(ish) mail merge to send a bunch of emails using Thunderbird with the the Mail Merge addon but couldn't get it to work. What other options exist to quickly and simply set up a mail merge under windows?

    Read the article

  • How do I add a version number field to an office 2007 docx document?

    - by Jon Cage
    I've been having a crack at using fields in Word 2007 and have hit a slight stumbling block. I want to add a field which I can use in several parts of the document to represent the current version (something of the form v0.1 but I can't see an obvious way to do it). The only provision I've found for this is something called RevNum but that gets updated every time I save the document. Is there a field I've missed or a way of adding custom fields or something?

    Read the article

  • Why does my exchange message filtering rule not work?

    - by Jon Cage
    I have two rules set up to sort incoming bug reports. The first is specific to a single device: Apply this rule after the message arrives sent to SMS Distribution and with <source_device_number>: in the body move it to the BugReports\<source_device_number> folder ..and the second is a catch-all for everything else: Apply this rule after the message arrives sent to SMS Distribution move it to the BugReports folder For some reason though, the first rule never seems to act even though it's higher in the list. So for some reason an email like the following doesn't seem to get caught by the first rule: From: <SourceDeviceUID> To: SMS Distributor Subject: Message from <SourceDeviceUID> Message: <source_device_number>: Device encountered a problem. Details below... ...where <source_device_number> is an integer. The second rule works fine. But for some high-priority devices, I want them automatically sorted. Why might that first rule fail?

    Read the article

1 2 3 4  | Next Page >