Search Results

Search found 18 results on 1 pages for 'xsane'.

Page 1/1 | 1 

• How to debug xsane "no devices available" error on 64 bit Ubuntu 10.04

  - by BD at Rivenhill

  I have a Brother MFC-J615W printer/scanner and I wish to use the scanning feature across a network with a computer running 64-bit Ubuntu 10.04. I have installed the drivers from the Brother website and followed all of the instructions, and printing works fine, but xsane (installed from repositories) produces a popup with the message "no devices available" on startup. I recently had success with a similar approach when installing drivers for a Brother MFC-495CW on 32-bit Unbuntu 9.10, so I am aware of issues such as requiring root access if the driver permissions are not set correctly, but running xsane as root does not solve this problem. Are there any tools available to debug this problem further or does anyone have advice on how to proceed?

  Read the article

• How to debug xsane "no devices available" error on 64 bit Ubuntu 10.04

  - by BD at Rivenhill

  I have a Brother MFC-J615W printer/scanner and I wish to use the scanning feature across a network with a computer running 64-bit Ubuntu 10.04. I have installed the drivers from the Brother website and followed all of the instructions, and printing works fine, but xsane (installed from repositories) produces a popup with the message "no devices available" on startup. I recently had success with a similar approach when installing drivers for a Brother MFC-495CW on 32-bit Unbuntu 9.10, so I am aware of issues such as requiring root access if the driver permissions are not set correctly, but running xsane as root does not solve this problem. Are there any tools available to debug this problem further or does anyone have advice on how to proceed?

  Read the article

• XSane Brings Sanity to the Mad, Mad World of Linux Scanning

  <b>LinuxInsider:</b> "For Linux, XSane can make a world of difference. Xsane is a scanner interface that uses the Scanner Access Now Easy driver."

  Read the article

• Issues while trying to install Xsane

  - by Sebastian

  :) I am sort of new in the world of Linux. I installed Zorin OS and I am very happy with it. My only problem is that I would like to be able to use my scanner. My Kodak printer works fine, but the scanner is not detected; therefore, I am trying to install Xsane. The issue remains, every time that I try to install it, and error message comes up saying; "Package dependencies cannot be resolved" What can I do? thanks!

  Read the article

• Weird noise while scanning, using scanimage and a Canon Lide 35

  - by Manu

  I'm trying to scan a bunch of images, using xsane's scanimage : scanimage --format=tiff --batch --batch-prompt This command scans the first picture perfectly, but as soon as I press enter, the scanner makes a weird noise, and the scanning "arm" moves very, very slowly. If I stop scanimage and start again, it scans normally again. Is there another scanimage option that I need to add? I've checked the man page, but can't see what I'm missing. Edit: the problem seems to be that the scanning "arm" doesn't go back to it's original position after the first scan.

  Read the article

• Utility for scanning stacks of double-sided documents

  - by Peter Becich

  I have a simplex scanner with document feeder, and am looking for the best way to scan double-sided notes. It would be useful to be able to scan the same stack twice, once flipped, and have a utility automatically interleave the scanned images. Multi-page PDF export would also be nice. Is there a tool to do this? Otherwise, I'm considering writing it in Python, with the imagescanner module, if it can use the ADF -- http://pypi.python.org/pypi/imagescanner/0.9 Thanks

  Read the article

• How to scan multiple pages from a book under Linux?

  - by rumtscho

  I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

  Read the article

• Setting up SANED with sane-test

  - by Enoon

  I'm trying to setup a network service for running saned (running the sane-test backend) on Ubuntu 12.10, running it on a virtualbox. I followed the directions found here: https://help.ubuntu.com/community/ScanningHowTo and i got to the point where if i use a front-end like xsane, or use the command scanimage -d test i get the desired behaviour. (i get the test image). But when i try to use the network demon to access the backend (from the localhost) i get Failed to connect. I used telnet on 127.0.0.1 6566 and i got the following error: saned: symbol lookup error: saned: undefined symbol: sanei_w_init I'm a linux newbie, so i could be making some stupid mistake. Any ideas on how to fix this? Thanks [update]After posting this question i logged out, logged back in and it worked. After a few days i tried again and it gave the same error as before. Any help?

  Read the article

• Canon MP495 Scanner not working

  - by Andrew

  Running 12.04, installed and updated latest drivers for MP495 but nothing stil. latest drivers provided here: https://code.launchpad.net/~michael-gruz/+archive/canon-trunk/+packages Followed this guide to the letter: http://ubuntuforums.org/showthread.php?t=1602839&page=11 Xsane and simple scan do not work. I have tried various other programs and have nothing... People are saying it works well with 11.10, so I don't know what the deal is with 12.04. Any help would be greatly appreciated as I need this printer for my out-of-home business, and I really don't want to switch back windows just for a freaking scanner to function. Why don't these companies realise ubuntu users need to print things too?!

  Read the article

• 12.04 scanner works fine as super-user but is not recognised as a normal user

  - by Eugénio Outeiro

  I have an all-in-one printer Epson SX130, wich I have just tried to install. I got the printer working with no problem, but I couldn't set the scanner up. I have had another all-in-one printer before (Brother DCP-125C), and had just the same problem, so I decided to try the same trick I used to do then, running the scanning program as super-user: $sudo simple-scan and $ sudo xsane Once again, it worked just fine, and I could use the scanner. Anyhow, this solution is a little annoying, because I also have to change the permissions to the files I get scanning like this. I have been searching the internet for solutions and got to know this must have something to do with user groups permissions, but couldn't find a satisfying solution. Is there anyone with an idea? Thank you in advance.

  Read the article

• brother MFC-J435W wireless scanning issue

  - by ogreen32

  Thanks for taking the time to read this. I have a brother MFC-J435W and I was able to get the printer set up for wireless printing, but it is not allowing me to scan wirelessly. It gives me the message to "check connection". I'll tell you what I've done so far and maybe someone can help me out. I've installed the scanner driver and scan tool I installed Xsane (to see if it would allow the scanner to communicate with the computer and that didn't help). I've tried restarting the computer. After those things I am now at a loss as to where to go from here. Any help would be great. Thanks. I've also searched for this question in the Brother FAQ as well as on here and I haven't found an answer. Thanks again.

  Read the article

• How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

  - by detly

  I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

  Read the article

• Simple scan not working after upgrading to 12.10 (Xubuntu)

  - by mydoghasworms

  Since upgrading to 12.10 (Xubuntu), Simple Scan is not working anymore. I got scanning working with Xsane, but only if Simple Scan has not run before. Otherwise I have to restart the printer/scanner (HP OfficeJet J5783). In kernel.log I see: kernel: [ 1214.120964] usb 2-1.4: >usbfs: process 4412 (simple-scan) did not claim interface 2 before use and in syslog simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: sane_hpaio_cancel: already cancelled! simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/dot4.c 231: unable to read Dot4ReverseReply header: No data available bytesRead=0 simple-scan: io/hpmud/dot4.c 319: invalid DOT4InitReply retrying command... simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/hpmud.c 342: device_cleanup: device uri=hp:/usb/Officejet_J5700_series?serial=CN81LCV0V604TC simple-scan: io/hpmud/hpmud.c 354: device_cleanup: close device dd=1... simple-scan: io/hpmud/hpmud.c 356: device_cleanup: done closing device dd=1 Any ideas?

  Read the article

• After upgrading to 12.04 the scanner from Brother Printer MFC-290C does not work

  - by Lorenzo

  I upgraded Ubuntu to 12.04 from 11.10. The printer works, but the scanner doesn't now. In 11.10 I had to install a special driver from Brother. The printer's model is Brother MFC-290C. The computer is a Toshiba Satellite. How can I get the scanner working? Update: I have a 64-bit installation on the Toshiba Satellite. Thank you for your instructions, Chad--24216. I followed each step: 1 through 5. I also updated the Brother Linux scanner S-KEY tool. The output of dpkg -l | grep Brother is: ii brscan-skey 0.2.3-0 Brother Linux scanner S-KEY tool ii brscan3 0.2.11-5 Brother Scanner Driver ii mfc290ccupswrapper:i386 1.1.2-2 Brother CUPS Inkjet Printer Definitions ii mfc290clpr:i386 1.1.2-2 Brother lpr Inkjet Printer Definitions ii printer-driver-ptouch 1.3-3ubuntu0.1 printer driver Brother P-touch label printers Still the scanner does not work. Here is the message from Xsane: Failed to open device brother3:bus6;dev1: Invalid argument. Here is the message from Simple Scan: Failed to scan. Unable to connect to scanner. And Scan Utility still doesn't display the scanner line.

  Read the article

• Ricoh Aficio 1515ps - How can I get the scanner to scan? (printing works)

  - by nutty about natty

  For similar screenshots and story, see: How to define my Samsung SCX3200 multifunction printer? and for a possible solution: How can I get an Epson TX560WD scanner working? Thanks! Edit n°1 installed xsane (via Ubuntu Software Center), launched it and get the following: Clicking on "Help" yields: I tried 4) man sane-dll which yields No manual entry for sane-dll I uninstalled "Simple Scan": didn't help. I tried 3) but aborted due to unsettling warning ;) wasn't that brave (or desperate). Maybe it's due to 1) and I'm stuck with it? Is it really not possible that a driver for either Windoze or Mac OS would also support scanning via Ubuntu? Edit n°2 Resorted to Windows XP and the Network TWAIN Driver ScanRouter or the "lite" version (which I found elsewhere) might also work (under Linux??); but it's more than I need. Thought about WINE, but also that seems to rely on SANE... So still no luck with this device's scanning capabilities with Linux (but good enough (via xp) for my purposes)...

  Read the article

• Canon Pixma 432 network scanner

  - by Donald Cutler

  I have a problem with a Canon Pixma MX432 Printer/Scanner. I just removed Windows 7 and installed Ubuntu 14.04 8/17/2014 on an older desktop that I built (The computer is an AMD build with an ASUS motherboard). The printer/scanner is an all-in-one unit that is networked in my house via WiFi. All of the computers in my house can access this printer/scanner. My Macbook, my wife's Windows 8 laptop, and my kids mini iPads. I am giving Linux a test-drive with some success as far as setting devices up. But, for the life of me I cannot figure out my scanner issue. If anyone can help I would appreciate it. Make/Model: Canon Pixma MX432 PPD Driver: I have no idea how to get this info. Supported?: no, from the information I gather from old forum posts. Works?: the printer works via WiFi perfectly, but not the scanner. The Simple Scan program sees the scanner, but produces an error when I attempt to scan. I also tried XSANE, but that program does not even detect the scanner. NOTE: THE PRINTER IS WORKING OFF OF AN UBUNTU DRIVER AND NOT A CANON DRIVER. Linux Version: Ubuntu 14.04 I tried the steps in this post, downloaded the "scangearmp-mx430series-1.90-1-deb.tar.gz" file, but could not get the scanner to work. http://ubuntuforums.org/archive/index.php/t-2096430.html any suggestions?

  Read the article

• How do I troubleshoot CanoScan LIDE20 on Ubuntu 9.10 in VirtualBox?

  - by kara-marfia

  This may be a VirtualBox question more than anything else. The host OS is Win7, which sees the scanner, but has no drivers for it. VirtualBox sees & recognizes the scanner as "Cannon Scan" and shows "state captured" when I hover over USB devices. Searching gives me many happy reports of this particular scanner being well supported, and that SANE should work with it immediately (also listedin the Supported Hardware List. I get "no devices available" from XSane... and I'm not sure where else I can check. I'd like to see if VirtualBox is telling the truth and find out if the USB port is actually being fed into the virtual OS. Can anyone point me in the right direction of where/how to do that in Ubuntu? Or other bright ideas. I'm starting with a little project to add some zing to my beginner linux studies - I'm sure I haven't checked some obvious things, because I don't know them yet. ;)

  Read the article

• File doesn't exist when trying to change permissions following the avasys image scan manual

  - by Howard Graham

  I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

  Read the article

1