Search Results

Search found 5670 results on 227 pages for 'zend router'.

Page 1/227 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Router block some sites

  - by Mahesha999

  Hi I was using ADSL Modem/Router earlier. The device is quite old Pronet PN-ADSL 101 E/U model (pics: http://bit.ly/P2YaWy, http://bit.ly/OA700l) Since it had only one RJ45 out, I bought new Wireless Router TPLink TL-WR941ND. It has 4 RJ45 out and 3 wireless antennas. I configured my old router in bridge. Now, if I have to connect my pc to Internet through the old router, I have to enter username and password. Then I connected the RJ45 output of old router to the WAN in of new router. and ran the CD of new router. It configured the new router in PPPoE by saving the username and password in router to dial automatically. So now I have to just plug in the wires in my new routers any RJ45 out. I am able to access the Internet when I connect through new router (both wired and wirelessly), but some sites are getting blocked. Most notably yahoo.com (though ymail.com is working), Microsoft.com. msn.com. These sites work perfectly fine when I connect my pc directly to my old router and enter username and password manually. (However others like google.com. facebook.com works fine when connect through new router) So here these some sites need some parameter set but I am unable to find them out. Can anyone help me. My friend said he also faced same problem. Surprisingly he advised me to see if the same websites will work through Opera turbo mode and boom they worked. So what could be the problem?

  Read the article

• Zend Framework - Zend Tool - Module error: I have error after I create module with Zend Tool

  - by Yosef

  Hi, I new in zend framework. I create zend project with zend tool and its works , but i create module and when i try access him with browser I get Error. I write my steps, please help me. Thanks, Yosef My steps: $ sudo zf create project mystore put Zend library inside library test: http://localhost/mystore/public/ (working) Add module store (not working) $ sudo zf create module store add to application.ini path to modules resources.frontController.moduleDirectory = APPLICATION_PATH "/modules" resources.modules = "" test1: http://localhost/mystore/public/store/ test2: http://localhost/mystore/public/store/public/ test3: http://localhost/mystore/public/modules/store/public/ test1+2+3 result: An error occurred Page not found Exception information: Message: Invalid controller specified (index.php) Stack trace: #0 /var/www/mystore/library/Zend/Controller/Front.php(954): Zend_Controller_Dispatcher_Standard->dispatch(Object(Zend_Controller_Request_Http), Object(Zend_Controller_Response_Http)) #1 /var/www/mystore/library/Zend/Application/Bootstrap/Bootstrap.php(97): Zend_Controller_Front->dispatch() #2 /var/www/mystore/library/Zend/Application.php(366): Zend_Application_Bootstrap_Bootstrap->run() #3 /var/www/mystore/public/index.php(25): Zend_Application->run() #4 {main} Request Parameters: array ( 'module' => 'store', 'controller' => 'index.php', 'action' => 'index', )

  Read the article

• Zend Pdf generation from an action

  - by Nisanth

  Hi all, I have a controller Employee , in that i have the action detail . The detail action prints like the attached image. Suppose there is a save pdf button, i need to print this page as .pdf.. How can i do this ? Pls help me Thanks in advance Nisanth

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• Huawei HG8245T Router - not connecting to another router

  - by BubbaK

  I just got a fiber optic connection installed at home and due to the build of the house, it's mostly cement/bricks, the wireless connection isn't received throughout the house. Previously, to combat this issue, I just ran a hardwire from the modem downstairs and upstairs and had it connected to a secondary (DLink) router. It did the job of getting me seamless wireless internet access everywhere. The issue is now with the new Huawei router, this setup isn't working. I have connected everything as previously, but it seems that the other (DLink) routers are not picking up the connection. I have tried everything and am totally lost as what to do to overcome this problem. Any help would be appreciated.

  Read the article

• Router to WIFI Client to Router (New solution for distance when repeater doesnt help)

  - by Kangarooo

  Ethernet to TL-WR340G with WIFI enabled Using TL-WA500 tried repeater mode which was not good enough and had password problems (could not connect if using either ASCII or Normal password in one way then in repeater worked other way) and also could not forward (repeat) WPA/WPA2 security. So since this repeater can also be as client, I made it as client and used another router (TL-WR740N) to get from wire connection from that client and all was working for a little bit. Every machine is set up to be auto DHCP. 1st when setting up client mode I found it working after doing reset. Then after some tens of minutes internet stopped working. When I removed WiFi client then all went back to normal. Where is the problem and how to make this work? Ethernet- TL-WR340G(AutoDHCP) ==> wifi ==> TL-WA500 TL-WA500 wifi client mode(AutoDHCP) ==> wire ==> TL-WR740N TL-WR740N router mode (AutoDHCP) ==> My Computer In other words: TL-WR340G ) ) ) ) TL-WA500 ===== TL-WR740N ==== PC1 ) ) WiFi === Wire

  Read the article

• Encoding Problem with Zend Navigation using Zend Translate Spanish in XMLTPX File Special Characters

  - by Routy

  Hello, I have been attempting to use Zend Translate to display translated menu items to the user. It works fine until I introduce special characters into the translation files. I instantiate the Zend_Translate object in my bootstrap and pass it in as a translator into Zend_Navigation: $translate = new Zend_Translate( array('adapter' => 'tmx', 'content' => APPLICATION_PATH .'/languages/translation.tmx', 'locale' => 'es' ) ); $navigation->setUseTranslator($translate); I have used several different adapters (array,tmx) in order to see if that made a difference. I ended up with a TMX file that is encoded using ISO-8859-1 (otherwise that throws an XML parse error when introducing the menu item "Administrar Applicación". <?xml version="1.0" encoding="ISO-8859-1"?> <!DOCTYPE tmx SYSTEM "tmx14.dtd"> <tmx version="1.4"> <header creationtoolversion="1.0.0" datatype="tbx" segtype="sentence" adminlang="en" srclang="en" o-tmf="unknown" creationtool="XYZTool" > </header> <body> <tu tuid='link_signout'> <tuv xml:lang="en"><seg>Sign Out</seg></tuv> <tuv xml:lang="es"><seg>Salir</seg></tuv> </tu> <tu tuid='link_signin'> <tuv xml:lang="en"><seg>Login</seg></tuv> <tuv xml:lang="es"><seg>Acceder</seg></tuv> </tu> <tu tuid='Manage Application'> <tuv xml:lang="en"><seg>Manage Application</seg></tuv> <tuv xml:lang="es"><seg>Administrar Applicación</seg></tuv> </tu> </body> </tmx> Once I display the menu in the layout: echo $this->navigation()->menu(); It will display all menu items just fine, EXCEPT the one using special characters. It will simply be blank. NOW - If I use PHP's UTF8-encode inside of the zend framework class 'Menu' which I DO NOT want to do: Line 215 in Zend_View_Helper_Navigation_Menu: if ($this->getUseTranslator() && $t = $this->getTranslator()) { if (is_string($label) && !empty($label)) { $label = utf8_encode($t->translate($label)); } if (is_string($title) && !empty($title)) { $title = utf8_encode($t->translate($title)); } } Then it works. The menu item display correctly and all is joyful. The thing is, I do not want to modify the library. Is there some kind of an encoding setting in either zend translate or zend navigation that I am not finding? Please Help! Zend Library Version: 1.11

  Read the article

• Get all model details in zend.

  - by Prasanth P

  Hi, I have one doubt in zend framework. I need all model details from project which i have done in zend framework. Is there any possibility to get all model details in zend framework. Please help me.. Thanks and regards, Prasanth P

  Read the article

• Is it possible to turn the DSL router/modem into a simple modem?

  - by Jader Dias

  I use a DSL router/modem + a wireless router. If the wireless router spoke PPoE could I suppress the router function of the DSL modem? I want to do that because I think it will reduce a routing hop improving performance and availability.

  Read the article

• How can I add a wireless router to a wired router?

  - by Tester101

  The Setup: wired D-link (EBR-2310) router connected to my cable modem. Wireless NetGear N300 (WNR2000v3) router connected to a LAN port on the wired router. What I'm trying to do: I'm trying to setup the wireless router to be a separate network, that only accesses the internet through the wired router. What I've done so far. I setup the wireless router's WAN port to get an address from ISP (which should be coming from my wired router running DHCP), and the LAN as a subnet (192.168.1). Wired router's LAN is 192.168.0. The problem: I'm not able to connect to the internet from the wireless router. At one point my wired router showed that it was handing out an IP to the wireless router, but that is not happening anymore. The question: Is what I'm trying to do possible? Am I not thinking about this properly? Do I need to buy a better wired router, with 2 WAN ports? How can I configure these routers to work together?

  Read the article

• Installing Zend on CentOS is having dependency issues

  - by rax

  I'm trying to install PHP's Zend Server on my CentOS VPS but it's having dependency issues that I can't seem to resolve. zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) When consulting the Google, all I get told is how to install PHP 5.2.* on CentOS. According to the output of php -v, I've done that. PHP 5.2.8 (cli) (built: Sep 28 2009 15:37:15) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies with the ionCube PHP Loader v3.1.34, Copyright (c) 2002-2009, by ionCube Ltd. How can I solve this issue?

  Read the article

• Installing Zend on CentOS is having dependency issues

  - by rax

  I'm trying to install PHP's Zend Server on my CentOS VPS but it's having dependency issues that I can't seem to resolve. zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) When consulting the Google, all I get told is how to install PHP 5.2.* on CentOS. According to the output of php -v, I've done that. PHP 5.2.8 (cli) (built: Sep 28 2009 15:37:15) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies with the ionCube PHP Loader v3.1.34, Copyright (c) 2002-2009, by ionCube Ltd. How can I solve this issue?

  Read the article

• Macintosh computers cannot connect to router unless we re-start the modem and router

  - by dwwilson66

  We have a small office network with DSL and a Netgear WNR-2000 wireless router acting as a DHCP server. There are nine devices connected to the router, wirelessly and wired. Whenever a Mac computer tries to connect, it's unsuccessful until we restart the router. Each of the possible devices that can connect to the network is listed in a table to assign certain IP addresses to certain MAC addresses. I am running WPA-PSK security. I can view the router status and see that the Mac's MAC address is visible to the router, but with a 169.* IP address, even though I'm assigning its MAC address to an IP address within my subnet. All non-Mac devices attached to the network connect properly, and can access the network properly even AFTER the Mac has not successfully connected. The network includes Windows devices, Roku boxes, printers and internet ready TVs. This to me, would point to a DHCP issue with how Mac communicates with my network. One interesting thing to note is that if a Mac connects and is prevented from sleeping, it will stay connected indefinitely; reissuing the security cert from the router works fine. I'm not sure if that's supposed to sever & re-establish a connection with the updated credentials or not, but I do stay connected. If the Mac sleeps and is awakened while the security cert is still valid, it connects fine. If the security certificate expires while the Mac is asleep, we need to restart the router. Restarting the router will ALWAYS assigns the proper IP addresses to the Mac equipment. I have heard anecdotally that Mac doesn't play well with 802.11n; I have not tested any other Wireless protocols. There's a couple issues here: First, I found this on Stack, Mac laptop crashing wireless router, but it's not rally applicable since the router isn't crashing. But, it does give some clues about Mac's accessing the network. I did change my encryption from WEP to WPA-PSK, but after about a week, we're still experiencing the issue. I'm not really sure if there's anything else useful in that question. Second, I'm considering getting a 802.11c router and hooking it up to the wireless N router. the 802.11c router would handle all the Mac traffic, and would be set up as a Mac-only subnet. Everything else would remain as is. However, I'm not sure if this is doable on a technology level...do I need a bridge or is this some way to do this with regular consumer gear?

  Read the article

• Two Routers - 1 Port Straight to First Router

  - by apples

  At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I could make it so that I have the second router have its own network, but have one or two ports that would act as if they were directly connected to the first router? That way I can port forward to devices on the second router. Here are the information about the routers: Router 1 - Linksys WRT54G Running stock firmware Router 2 - Linksys E900 Running Tomato Firmware So to summarize what I'm asking is how would I have two networks from two routers but be able to connect directly to the first router through one of the ports on the second router. Here's a Visio Drawing of what I would like to look like

  Read the article

• ZF2 Zend\Db Insert/Update Using Mysql Expression (Zend\Db\Sql\Expression?)

  - by Aleross

  Is there any way to include MySQL expressions like NOW() in the current build of ZF2 (2.0.0beta4) through Zend\Db and/or TableGateway insert()/update() statements? Here is a related post on the mailing list, though it hasn't been answered: http://zend-framework-community.634137.n4.nabble.com/Zend-Db-Expr-and-Transactions-in-ZF2-Db-td4472944.html It appears that ZF1 used something like: $data = array( 'update_time' => new \Zend\Db\Expr("NOW()") ); And after looking through Zend\Db\Sql\Expression I tried: $data = array( 'update_time' => new \Zend\Db\Sql\Expression("NOW()"), ); But get the following error: Catchable fatal error: Object of class Zend\Db\Sql\Expression could not be converted to string in /var/www/vendor/ZF2/library/Zend/Db/Adapter/Driver/Pdo/Statement.php on line 256 As recommended here: http://zend-framework-community.634137.n4.nabble.com/ZF2-beta3-Zend-Db-Sql-Insert-new-Expression-now-td4536197.html I'm currently just setting the date with PHP code, but I'd rather use the MySQL server as the single source of truth for date/times. $data = array( 'update_time' => date('Y-m-d H:i:s'), ); Thanks, I appreciate any input!

  Read the article

• Ubuntu 10.10 Ad-Hoc Setup (from Wireless Router, to Ubuntu Server/Desktop to Wireless Router)

  - by user60375

  Okay, so I know there are different approaches for this, but I will explain my story briefly before getting to the technical stuff. My fiancée and I are going through some financial issues (as I assume a lot of us are). We ended up having to move from our house and stay with some friends/family for 6 months, just to get ourselves caught up. (Medical bills, among other issues,etc). So this is where it gets fun. At our friends house, we are staying in the loft setup which is not near the cable modem and wireless router. I have a "hand-crafted" media center running XBMC, an Ubuntu 10.10 Server/Desktop (multi-purpose, very powerful and tons drive space), two working laptops, a between the two of us we have multiple wireless devices/phones. Now our friends Wireless router doesn't have any options for assigning IP addresses, but my router does. My current setup is: Friends Cable Modem -- Friend's Wireless Router -- Ubuntu 10.10 Server -- My Wireless Router (local-link from Friend's wireless (incoming) to sharing connection on ETH0 (outgoing)) -- to all devices. (Wireless Modem, Ubuntu Server that share's it's wireless incoming connection to the ethernet port my Wireless router share's with the rest of the devices). I setup my router to use default settings from my friend's router, using Google's DNS on my router (disabled DNS setup on Ubuntu Server), everything is assigned nicely and runs smooth. My Ubuntu server was given the address 10.42.43.1 (assuming standard from Network-Manager). (On the Ubuntu machine that shares to my wireless router; I have some server apps installed, but mainly just use Samba/NFS/Tangerine action. My problem/goal is that every device has no problem of accessing the internet from my router, the media-center has an assigned ip address, all services from all devices (ZeroConf, Avanhi, Bonjour, GIT, SSH, FTP, Apache2, etc) all work correctly except from my Ubuntu Server (which serves the wireless connection to ETH0 to another Wireless Router). The Ubuntu 10.10 Server/Desktop is not broadcasting anything (the Zeroconf Service Discovery 0.4 Gnome Applet shows the services from the Ubuntu server but no other computers can see them). I can access it from my Media-Center (Running Xbuntu 10.04) if I direct it to 10.42.43.1, no problem. But I cannot access Tangerine (Daapd) and the Samba shares do not show up on any computers for 10.42.43.1 (not in the WORKGROUP which Samba is setup simple and default but I can direct computers to that address and the shares will add except on a damn Windows 7 parition). Is this an issue with how I have my router setup and possible the gateway? An issue with Network-Manager? And issue with my Ubuntu Server/Desktop? I know there is a lot to that, but it's simpler than I probably have explained? Any help would be appreciated. If you need more details, I can provide them. If there is a better way of my attempting this home-network, please let me know. Thanks in advance for the help.

  Read the article

• Connectiong adsl router/modem and router with bridgemode

  - by Zvonko Telefonko

  I have one adsl modem/router which is not "top" of the line and it lack allot of options which I need. I was able to acquire one Cisco router recently which has all options that I need ( like DMZ, VPN, port forwarding, etc). I'm interested, if I connect the old modem/router to new Cisco router using bridge mode, will I be able to use all the features on the Cisco? For instance, the old router is lacking of port forward options. Does this mean that I will not be able to use port forwarding on Cisco router either or, since I will be using bridge mode, this will not affect Cisco router and it will work as the modem is in him? thank you

  Read the article

• Zend Framework, Zend_Form_Element how to set custom name?

  - by ikso

  Hello, I have form, where some fields are looks like rows, so I can add/delete them using JS. For example: Field with ID=1 (existing row) <input id="id[1]" type="text" name="id[1]" value="1" /> <input id="name[1]" type="text" name="name[1]" value="100" /> Field with ID=2 (existing row) <input id="name[2]" type="text" name="name[2]" value="200" /> <input id="name[2]" type="text" name="name[2]" value="200" /> new row created by default (to allow add one more row to existing rows) <input id="id[n0]" type="text" name="id[n0]" value="" /> <input id="name[n0]" type="text" name="name[n0]" value="" /> new row created by JS <input id="id[n1]" type="text" name="id[n1]" value="" /> <input id="name[n1]" type="text" name="name[n1]" value="" /> So than we will proceed form, we will know what rows to update and what to add (if index starts with "n" - new, if index is number - existent element). I tried subforms... but do I have to create subform for each field? If I use following code: $subForm = new Zend_Form_SubForm(); $subForm->addElement('Text', 'n0'); $this->addSubForm($subForm, 'pid'); $subForm = new Zend_Form_SubForm(); $subForm->addElement('Text', 'n0'); $this->addSubForm($subForm, 'name'); What is the best way for this? 1) Use subforms? 2) Extend Zend/Form/Decorator/ViewHelper.php to use names like name[nX]? 3) Other solutions? Thanks.

  Read the article

• How to set up Hierarchical Zend Rest Routes?

  - by Kenji Baheux

  With the Zend Framework, I am trying to build routes for a REST api on resources organized in the following pattern: http://example.org/users/ http://example.org/users/234 http://example.org/users/234/items http://example.org/users/234/items/34 How do I set up this with Zend_Rest_Route? Here is how I have setup the route for the users resource (users/:id) in my bootstrap.php file: $this->bootstrap('frontController'); $frontController = Zend_Controller_Front::getInstance(); $restRoute = new Zend_Rest_Route($frontController); $frontController->getRouter()->addRoute('default', $restRoute); [As far as I understand, this is a catch all route so users/324/items/34 would results in parameters set as id=324 and items=34 and everything would be mapped to the Users (front module) Model. From there I guess I could just test for the items parameter and retrieve the item #34 for user #324 on a get request.]<=== I just checked it and it doesn't seems to work like that: Acessing /users/234/items/43 and var_dump($this->_getAllParams()); in the get action of the rest controller results in the following output: array(4) { ["controller"]=> string(5) "users" ["action"]=> string(3) "get" [2]=> string(5) "items" ["module"]=> string(7) "default"] } Somehow both ids got lost... Anyone?

  Read the article

• Zend Form, table decorators

  - by levacjeep

  Hello, I am having an incredibly difficult time to decorate a Zend form the way I need to. This is the HTML structure I am in need of: <table> <thead><tr><th>one</th><th>two</th><th>three</th><th>four</th></thead> <tbody> <tr> <td><input type='checkbox' id='something'/></td> <td><img src='src'/></td> <td><input type='text' id='something'/></td> <td><input type='radio' group='justonegroup'/></td> </tr> <tr> <td><input type='checkbox' id='something'/></td> <td><img src='src'/></td> <td><input type='text' id='something'/></td> <td><input type='radio' group='justonegroup'/></td> </tr> </tbody> </table> The number of rows in the body is determined by my looping structure inside my form class. All ids will be unique of course. All radio buttons in the form belongs to one group. My issue really is that I am unsure how to create and then style the object Zend_Form_Element_MultiCheckbox and Zend_Form_Element_Radio inside my table. Where/how would I apply the appropriate decoraters to the checkboxes and radio buttons to have a form structure like above? My Form class so far: class Form_ManageAlbums extends Zend_Form { public function __construct($album_id) { $photos = Model_DbTable_Photos::getAlbumPhotos($album_id); $selector = new Zend_Form_Element_MultiCheckbox('selector'); $radio = new Zend_Form_Element_Radio('group'); $options = array(); while($photo = $photos->fetchObject()) { $options[$photo->id] = ''; $image = new Zend_Form_Element_Image('image'.$photo->id); $image->setImageValue('/dog/upload/'.$photo->uid.'/photo/'.$photo->src); $caption = new Zend_Form_Element_Text('caption'.$photo->id); $caption->setValue($photo->caption); $this->addElements(array($image, $caption)); } $selector->addMultiOptions($options); $radio->addMultiOptions($options); $this->addElement($selector); $this->setDecorators(array( 'FormElements', array('HtmlTag', array('tag' => 'table')), 'Form' )); } } I have tried a few combination of decoraters for the td and tr, but no success to date. Thank you for any help, very appreciated. JP Levac

  Read the article

• Zend Studio Intellisense + zend Framework

  - by Ilya Biryukov

  Hi. I've got a very annoying problem with my Zend studio. I have a zend framework project I am working on. The actual zend framework code is inside my project (in library folder) and then ZS seems to reference to its own version of zend framework. As the result, I get 2 versions of the same function/class in my intellisense which is annoying to say the least. Today I had the last drop of patience with zend studio when I showed 4 copies of the same class (imagine what's its like looking at a large namespace times 4!). So, how do I remove all references inside ZS to its own version of ZF? Thanks!

  Read the article

• SSH through standard Belkin router to Asus Tomato router

  - by Luke

  I've set up SSH on the Tomato firmware on an Asus N10, via port 22 with key authentication. I've tested the keys by connecting with putty directly to the router when connected to its network. That works OK. But this router is behind a Belkin (F5D7632-4) router which also acts as modem and when I try to connect through with the (dynamic) public IP it times out. I'm guessing it's something to do with the NAT? My putty settings are taken from various online tutorials, but it's set up for port 22, with the correct key as mentioned. The Belkin router has port forwarding to the Asus (192.168.2.3) for port 22 TCP and UDP set up. It's now tough to see what to do in order to connect to the Asus router with an external IP - if it's even possible. Ideally I would have liked to have only needed to use the Asus router, but as it doesn't act as a modem, I need to connect it to the Belkin to use Tomato's features. Perhaps there's a solution here too? Network: Internet -> Belkin modem/router -> Asus router (Tomato SSH) -> Devices

  Read the article

• Access router set up as a bridge behind another router

  - by Alari Truuts

  I have a problem my ISP is refusing to help me with, even though they put up the whole system. Specifications: There's a Thomson TG784 router through which the internet comes in to the building, Behind that (for some reason) is a Juniper NetScreen 5XT - 105 Firewall/Router? which leads to an AMX nxa-enet24 switch that carries the connections all over the building and a series of Apple AirPorts for wifi. Problem: The first router (Thomson) is required for ipTV (by Elion). The tv or ipTV box has to be connected straight to the Thomson router. My service provider cannot see the Thomson router from their side, but see the Juniper, so we might think the Thomson has been configured as a bridge. I need a way to access the Thomson router and see it's configurations, because currently, when connecting a Samsung tv to that router (with elion app for ipTV viewing) or even a computer, it cannot access the internet and even if it could, it would update the Thomson router software, losing it's configurations which I need to preserve. I'm unable to find out the Thomson routers ip address to connect to it, and when directly conencting with a cat5 cable, it doesn't give me an ip address. Hope someone can show me the correct direction for solving my issue. Thank you all for reading, and I appreciate any help, Alari Truuts

  Read the article

• Zend Date -- day difference

  - by Nisanth

  Hi All, I have the below line of codes $day1 = new Zend_Date('2010-03-01', 'YYYY-mm-dd'); $day2 = new Zend_Date('2010-03-05', 'YYYY-mm-dd'); $dateDiff = $day2->getDate()->get(Zend_Date::TIMESTAMP) - $day1->getDate()->get(Zend_Date::TIMESTAMP); $days = floor((($dateDiff / 60) / 60) / 24); return $days; this will return 4 But if gave $day1 = new Zend_Date('2010-02-28', 'YYYY-mm-dd'); $day2 = new Zend_Date('2010-03-01', 'YYYY-mm-dd'); $dateDiff = $day2->getDate()->get(Zend_Date::TIMESTAMP) - $day1->getDate()->get(Zend_Date::TIMESTAMP); $days = floor((($dateDiff / 60) / 60) / 24); return $days; it will return -27 .. how will i get right answer

  Read the article

• Router behind router network setup

  - by optimus

  My relative has bought a router instead of a switch which causes remote-access control issues on his network. His existing network has a 1st router where all PCs are connected via LAN cables. The 2nd router connnects to the 1st router and the remaining PCs are connected to the 2nd router via LAN cables. Normally, I would perform remote-access to help him out with some task. Now it seems all services behind the 2nd router are unavailable to me. How can I resolve this issue?

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >