Configuring VLAN's on two HP procurve switches
- by pan
Trying to route a new ISP (Microwave link) from one of my out buildings to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network, I plan on using a new vlan called "airspeed" only for this ISP traffic.
Up until now I've just been using the Default_vlan on both HP switches (4108 + 2524).
So far I've been unable to ping from my laptop to the ISP modem both of which are on the new vlan 2 ("Airspeed"). No traffic needs to cross from vlan 2 to vlan 1 so I've left the ports as untagged. I've used the subnet provide from my ISP as the new vlan 2 subnet.
Can anybody see what I'm doing wrong here? I've added the configuration of both switch below.
Rough diagram:
Microwave modem (Gateway IP 77.75.00.49)
|
HP 2524 switch (port 24)
|
HP 2524 switch fibre link
|
HP 4108GL switch fibre link
|
HP 4108GL switch (port D1)
|
Laptop configured with IP 77.75.00.50 (for testing but will be connected to firewall)
And my 4108GL config:
; J4865A Configuration Editor; Created on release #G.07.21
hostname "HP ProCurve Switch 4108GL"
cdp run
module 1 type J4864A
module 2 type J4862B
module 3 type J4862B
module 4 type J4862B
ip default-gateway 128.1.146.50
snmp-server community "public" Unrestricted
snmp-server host 128.1.146.51 "public" Not-INFO
snmp-server host 128.1.146.38 "public"
vlan 1
name "DEFAULT_VLAN"
untagged A1-A3,B1-B24,C1-C24,D2-D24
ip address 128.1.146.203 255.255.0.0
no untagged D1
exit
vlan 2
name "Airspeed"
untagged D1
ip address 77.75.00.51 255.255.255.248
exit
Finally my 2524 config:
; J4813A Configuration Editor; Created on release #F.04.08
hostname "HP ProCurve Switch 2524"
cdp run
ip default-gateway 0.0.0.0
snmp-server community "public" Unrestricted
snmp-server host 128.1.146.51 "public" Not-INFO
snmp-server host 128.1.146.51 "public"
snmp-server host 128.1.146.38 "public"
vlan 1
name "DEFAULT_VLAN"
untagged 1-23,25-26
no untagged 24
ip address 128.1.146.204 255.255.0.0
exit
vlan 2
name "Airspeed"
untagged 24
ip address 77.75.00.51 255.255.255.248
exit
no aaa port-access authenticator active
