HP DL380 G5 Predictive failure of a new drive

Posted by CharlieJ on Server Fault See other posts from Server Fault or by CharlieJ
Published on 2012-09-21T14:10:36Z Indexed on 2012/09/21 21:42 UTC
Read the original article Hit count: 208

Filed under:

raid

|

hp

|

proliant

|

smartarray

Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure.

We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay.

Is it likely the new drive is bad... or more likely we have a bay failure problem?

This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad.

THANKS! CharlieJ

© Server Fault or respective owner

Related posts about raid

Booting from integrated RAID controller when another RAID controller is installed in a PCIe slot

as seen on Server Fault - Search for 'Server Fault'
I have a GA MA785GT UD3H motherboard with Windows Server 2008 R2 installed on a RAID1 using the on-board RAID controller. I have now installed a RocketRaid 2680 controller and set up a RAID5 for all my data to be stored on. Unfortunately I now cannot boot from the RAID1 anymore, the PC is trying… >>> More
Onboard RAID vs Software RAID

as seen on Server Fault - Search for 'Server Fault'
My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller? >>> More
RAID-1 and regular drive removal (using RAID-1 as a backup measure)

as seen on Super User - Search for 'Super User'
Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is… >>> More
Explain difference in SQLIO numbers for RAID 0 versus RAID 5 over 6 disks

as seen on Stack Overflow - Search for 'Stack Overflow'
When using the SQLIO benchmark tool on a 4-core Dell server with 6 15k 450GB (fast) drives, RAID 0, we found the max throughput was 2MB per second. But when configured as RAID 5, we get 30 MB per second. It seems that the RAID controller, Dell Perc 5i integrated controller, is maxing out the… >>> More
RAID 5 RECONSTRUCT with RAID Reconstructor

as seen on Server Fault - Search for 'Server Fault'
I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software… >>> More

Related posts about hp

/usr/lib/cups/backend/hp has failed with an HP LaserJet p3005

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a… >>> More
/usr/lib/cups/backend/hp has failed with an HP LaserJet p3005

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
Ever since 10.04, I can't print to an HP laserjet p3005. I'm even using an entirely different computer now with a fresh install of 10.10. I've tried with and without the latest hplip. Recently, sometimes I can get it to print a few things, but eventually it always fails (usually when printing a… >>> More
HP PDX Laptop and blu-ray region, HP MediaSmart problem

as seen on Super User - Search for 'Super User'
I have a laptop here, a HP HDX 16 EO1000 with a Blu-Ray drive. Installed on the machine is a software package called HP MediaSmart, which presumably can play Blu-Ray movies. However, when inserting a BD disk and starting HP MediaSmart, it comes up with a warning screen and the following message: … >>> More
Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

as seen on Ask Ubuntu - Search for 'Ask Ubuntu'
This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to… >>> More
Getting hp-snmp-agents on HP ProLiant DL360 on Lenny working

as seen on Server Fault - Search for 'Server Fault'
After receiving our HP ProLiant DL360 I'd like to integrate the machine into our Munin system and thus enable ProLiant specific information to be exposed via SNMP. I'm running Debian Lenny with kernel 2.6.26-2-vserver-amd64 . I've followed http://downloads.linux.hp.com/SDR/getting_started.html and… >>> More