Search Results

Search found 767 results on 31 pages for '4k sectors'.

Page 1/31 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• 4K sectors: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors? Are 4K sectors a

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• Hard Disk Not Counting Reallocated Sectors

  - by MetaNova

  I have a drive that is reporting that the current pending sectors is "45". I have used badblocks to identify the sectors and I have been trying to write zeros to them with dd. From what I understand, when I attempt writing data directly to the bad sectors, it should trigger a reallocation, reducing current pending sectors by one and increasing the reallocated sector count. However, on this disk both Reallocated_Sector_Ct and Reallocated_Event_Count raw values are 0, and dd fails with I/O errors when I attempt to write zeros to the bad sectors. dd works fine, however, when I write to a good sector. # dd if=/dev/zero of=/dev/sdb bs=512 count=1 seek=217152 dd: error writing ‘/dev/sdb’: Input/output error Does this mean that my drive, in some way, has no spare sectors to be used for reallocation? Is my drive just in general a terrible person? (The drive isn't actually mine, I'm helping a friend out. They might have just gotten a cheap drive or something.) In case it is relevant, here is the output of smartctl -i : Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD15EARS-00Z5B1 Serial Number: WD-WMAVU3027748 LU WWN Device Id: 5 0014ee 25998d213 Firmware Version: 80.00A80 User Capacity: 1,500,301,910,016 bytes [1.50 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 18 17:47:29 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled UPDATE: I have run shred on the disk, which has caused Current_Pending_Sector to go to zero. However, Reallocated_Sector_Ct and Reallocated_Event_Count are still zero, and dd is now able to write data to the sectors it was previously unable to. This leads me with several other questions: Why aren't the reallocations being recored by the disk? I'm assuming the reallocation took place as I can now write data directly to the sector and couldn't before. Why did shred cause reallocation and not dd? Does the fact that shred writes random data instead of just zeros make a difference?

  Read the article

• What is the deal with hard drive technology moving to 4K sectors, vs. 512 bytes? Are 4K sector disk

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• 4K sectors transition: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors?

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the long-standing standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• format/build raid 5 with one 4k drive, three 512b

  - by skidawgz

  I have 4 WD 1TB drives which I want to 4x1TB Raid5. I am not sure what course of action to take next. How do I configure my 4th drive (sde) to align with the rest? Will this affect performance? I rcv this msg (which brings me here to ask these question): The device presents a logical sector size that is smaller than the physical sector size. Aligning to a physical sector (or optimal I/O) size boundary is recommended, or performance may be impacted. fdisk -l shows: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf324ba09 Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x38bcc1f0 Device Boot Start End Blocks Id System /dev/sdc1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 81 heads, 63 sectors/track, 382818 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x570f77e7 Device Boot Start End Blocks Id System /dev/sdd1 2048 1953525167 976761560 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xeb665e7b Device Boot Start End Blocks Id System

  Read the article

• Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors?

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the long-standing standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• MPM Prefork Apache Uses Absurd Amount of Memory

  - by Charlie JM

  Help! My apache processes are all using 115MB of memory on startup. Relevant information: Linux version (uname -a) Linux 2.6.31-14-generic-pae #48-Ubuntu SMP Fri Oct 16 15:22:42 UTC 2009 i686 GNU/Linux Apache version (/usr/sbin/apache2 -v) Server version: Apache/2.2.8 (Ubuntu) Server built: Mar 9 2010 20:45:36 Top display (top -u www-data) PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 23377 www-data 20 0 115m 94m 3908 S 28 1.6 0:04.59 apache2 23375 www-data 20 0 119m 99m 5892 S 9 1.6 0:05.04 apache2 23324 www-data 20 0 116m 96m 5144 S 2 1.6 0:04.73 apache2 23283 www-data 20 0 115m 95m 4480 S 1 1.6 0:04.89 apache2 23259 www-data 20 0 116m 96m 5380 S 0 1.6 0:05.55 apache2 23370 www-data 20 0 115m 94m 4396 S 0 1.6 0:04.75 apache2 23229 www-data 20 0 116m 96m 6096 S 0 1.6 0:05.43 apache2 ... and so on ... Memory map (pmap $(pidof apache2)) (actually, just one apache2 process) Most of the memory is [anon], see line 5 23324: /usr/sbin/apache2 -k start 08048000 332K r-x-- /usr/sbin/apache2 0809b000 8K rw--- /usr/sbin/apache2 0809d000 12K rw--- [ anon ] 093a0000 92812K rw--- [ anon ] b5b6c000 4K rw--- [ anon ] b5b6d000 512K rw-s- [ shmid=0x13528003 ] b5fa8000 16K r-x-- /lib/tls/i686/cmov/libnss_dns-2.7.so b5fac000 8K rw--- /lib/tls/i686/cmov/libnss_dns-2.7.so b5fae000 120K r-x-- /usr/lib/php5/20060613+lfs/suhosin.so b5fcc000 16K rw--- /usr/lib/php5/20060613+lfs/suhosin.so b5fd0000 4K rw--- [ anon ] b5fd1000 76K r-x-- /usr/lib/php5/20060613+lfs/pdo.so b5fe4000 8K rw--- /usr/lib/php5/20060613+lfs/pdo.so b5fe6000 92K r-x-- /usr/lib/php5/20060613+lfs/mysqli.so b5ffd000 8K rw--- /usr/lib/php5/20060613+lfs/mysqli.so b5fff000 1648K r-x-- /usr/lib/libmysqlclient.so.15.0.0 b619b000 268K rw--- /usr/lib/libmysqlclient.so.15.0.0 b61de000 4K rw--- [ anon ] b61f0000 92K r-x-- /usr/lib/libxcb.so.1.0.0 b6207000 4K rw--- /usr/lib/libxcb.so.1.0.0 b6208000 164K r-x-- /usr/lib/libfontconfig.so.1.3.0 b6231000 4K rw--- /usr/lib/libfontconfig.so.1.3.0 b6232000 124K r-x-- /usr/lib/libjpeg.so.62.0.0 b6251000 4K rw--- /usr/lib/libjpeg.so.62.0.0 b6252000 136K r-x-- /usr/lib/libpng12.so.0.15.0 b6274000 4K rw--- /usr/lib/libpng12.so.0.15.0 b6275000 60K r-x-- /usr/lib/libXpm.so.4.11.0 b6284000 4K rw--- /usr/lib/libXpm.so.4.11.0 b6285000 912K r-x-- /usr/lib/libX11.so.6.2.0 b6369000 12K rw--- /usr/lib/libX11.so.6.2.0 b636c000 424K r-x-- /usr/lib/libfreetype.so.6.3.16 b63d6000 12K rw--- /usr/lib/libfreetype.so.6.3.16 b63d9000 236K r-x-- /usr/lib/libt1.so.5.1.1 b6414000 12K rw--- /usr/lib/libt1.so.5.1.1 b6417000 84K rw--- [ anon ] b642c000 116K r-x-- /usr/lib/libgd.so.2.0.0 b6449000 128K rw--- /usr/lib/libgd.so.2.0.0 b6469000 16K rw--- [ anon ] b646d000 88K r-x-- /usr/lib/php5/20060613+lfs/gd.so b6483000 16K rw--- /usr/lib/php5/20060613+lfs/gd.so b6487000 192K r-x-- /usr/lib/libidn.so.11.5.30 b64b7000 4K rw--- /usr/lib/libidn.so.11.5.30 b64b8000 232K r-x-- /usr/lib/libcurl.so.4.0.1 b64f2000 4K rw--- /usr/lib/libcurl.so.4.0.1 b64f8000 44K r-x-- /usr/lib/php5/20060613+lfs/mysql.so b6503000 4K rw--- /usr/lib/php5/20060613+lfs/mysql.so b6504000 268K r-x-- /usr/lib/libgmp.so.3.4.2 b6547000 4K rw--- /usr/lib/libgmp.so.3.4.2 b6548000 648K r-x-- /usr/lib/libclamav.so.5.0.4 b65ea000 44K rw--- /usr/lib/libclamav.so.5.0.4 b65f8000 52K r-x-- /usr/lib/php5/20060613+lfs/curl.so b6605000 4K rw--- /usr/lib/php5/20060613+lfs/curl.so b6606000 148K r-x-- /usr/lib/libmcrypt.so.4.4.7 b662b000 8K rw--- /usr/lib/libmcrypt.so.4.4.7 b662d000 28K rw--- [ anon ] b6634000 24K r-x-- /usr/lib/php5/20060613+lfs/pdo_mysql.so b663a000 4K rw--- /usr/lib/php5/20060613+lfs/pdo_mysql.so b663b000 16K r-x-- /usr/lib/libXdmcp.so.6.0.0 b663f000 4K rw--- /usr/lib/libXdmcp.so.6.0.0 b6640000 12K r-x-- /usr/lib/php5/20060613+lfs/clamav.so b6643000 4K rw--- /usr/lib/php5/20060613+lfs/clamav.so b6644000 1036K r-x-- /usr/lib/libc-client.so.2007.0 b6747000 28K rw--- /usr/lib/libc-client.so.2007.0 b674e000 4K rw--- [ anon ] b6750000 24K r-x-- /usr/lib/libltdl.so.3.1.6 b6756000 4K rw--- /usr/lib/libltdl.so.3.1.6 b6757000 32K r-x-- /usr/lib/php5/20060613+lfs/mcrypt.so b675f000 4K rw--- /usr/lib/php5/20060613+lfs/mcrypt.so b6760000 88K r-x-- /usr/lib/php5/20060613+lfs/imap.so b6776000 4K rw--- /usr/lib/php5/20060613+lfs/imap.so b6777000 104K r-x-- /usr/local/lib/libssh2.so b6791000 4K rw--- /usr/local/lib/libssh2.so b6792000 1324K r-x-- /usr/lib/ZendOptimizer.so b68dd000 68K rw--- /usr/lib/ZendOptimizer.so b68ee000 20K rw--- [ anon ] b68f3000 8K r-x-- /usr/lib/libXau.so.6.0.0 b68f5000 4K rw--- /usr/lib/libXau.so.6.0.0 b68f6000 52K r-x-- /usr/lib/php5/20060613+lfs/ssh2.so b6903000 4K rw--- /usr/lib/php5/20060613+lfs/ssh2.so b6904000 252K r---- /usr/lib/locale/en_US.utf8/LC_CTYPE b6974000 64K rw-s- /dev/zero (deleted) b6984000 36K r-x-- /lib/tls/i686/cmov/libnss_files-2.7.so b698d000 8K rw--- /lib/tls/i686/cmov/libnss_files-2.7.so b698f000 32K r-x-- /lib/tls/i686/cmov/libnss_nis-2.7.so b6997000 8K rw--- /lib/tls/i686/cmov/libnss_nis-2.7.so b6999000 28K r-x-- /lib/tls/i686/cmov/libnss_compat-2.7.so b69a0000 8K rw--- /lib/tls/i686/cmov/libnss_compat-2.7.so b69a2000 36K r-x-- /lib/libpam.so.0.81.6 b69ab000 4K rw--- /lib/libpam.so.0.81.6 b69ac000 28K r--s- /usr/lib/gconv/gconv-modules.cache b69b3000 8K r-x-- /usr/lib/apache2/modules/mod_userdir.so b69b5000 4K rw--- /usr/lib/apache2/modules/mod_userdir.so b69b6000 148K r-x-- /usr/lib/apache2/modules/mod_ssl.so b69db000 8K rw--- /usr/lib/apache2/modules/mod_ssl.so b69dd000 8K rw--- [ anon ] b69df000 8K r-x-- /usr/lib/apache2/modules/mod_setenvif.so b69e1000 4K rw--- /usr/lib/apache2/modules/mod_setenvif.so b69e2000 1128K r-x-- /usr/lib/libxml2.so.2.6.31 b6afc000 20K rw--- /usr/lib/libxml2.so.2.6.31 b6b01000 4K rw--- [ anon ] b6b02000 80K r-x-- /lib/tls/i686/cmov/libnsl-2.7.so b6b16000 8K rw--- /lib/tls/i686/cmov/libnsl-2.7.so b6b18000 8K rw--- [ anon ] b6b1a000 140K r-x-- /lib/tls/i686/cmov/libm-2.7.so b6b3d000 8K rw--- /lib/tls/i686/cmov/libm-2.7.so b6b3f000 60K r-x-- /lib/libbz2.so.1.0.4 b6b4e000 4K rw--- /lib/libbz2.so.1.0.4 b6b4f000 4K r-x-- /usr/lib/libxcb-xlib.so.0.0.0 b6b50000 4K rw--- /usr/lib/libxcb-xlib.so.0.0.0 b6b51000 56K r-x-- /usr/lib/apache2/modules/mod_rewrite.so b6b5f000 4K rw--- /usr/lib/apache2/modules/mod_rewrite.so b6b60000 5060K r-x-- /usr/lib/apache2/modules/libphp5.so b7051000 208K rw--- /usr/lib/apache2/modules/libphp5.so b7085000 20K rw--- [ anon ] b708a000 28K r-x-- /usr/lib/apache2/modules/mod_negotiation.so b7091000 4K rw--- /usr/lib/apache2/modules/mod_negotiation.so b7092000 12K r-x-- /usr/lib/apache2/modules/mod_mime.so b7095000 4K rw--- /usr/lib/apache2/modules/mod_mime.so b7096000 36K r-x-- /usr/lib/apache2/modules/mod_include.so b709f000 4K rw--- /usr/lib/apache2/modules/mod_include.so b70a0000 4K r-x-- /usr/lib/apache2/modules/mod_env.so b70a1000 4K rw--- /usr/lib/apache2/modules/mod_env.so b70a2000 4K r-x-- /usr/lib/apache2/modules/mod_dir.so b70a3000 4K rw--- /usr/lib/apache2/modules/mod_dir.so b70a4000 20K r-x-- /usr/lib/apache2/modules/mod_cgi.so b70a9000 4K rw--- /usr/lib/apache2/modules/mod_cgi.so b70aa000 28K r-x-- /usr/lib/apache2/modules/mod_autoindex.so b70b1000 4K rw--- /usr/lib/apache2/modules/mod_autoindex.so b70b2000 4K r-x-- /usr/lib/apache2/modules/mod_authz_user.so b70b3000 4K rw--- /usr/lib/apache2/modules/mod_authz_user.so b70b4000 8K r-x-- /usr/lib/apache2/modules/mod_authz_host.so b70b6000 4K rw--- /usr/lib/apache2/modules/mod_authz_host.so b70b7000 8K r-x-- /usr/lib/apache2/modules/mod_authz_groupfile.so b70b9000 4K rw--- /usr/lib/apache2/modules/mod_authz_groupfile.so b70ba000 8K rw--- [ anon ] b70bc000 12K r-x-- /lib/libgpg-error.so.0.3.0 b70bf000 4K rw--- /lib/libgpg-error.so.0.3.0 b70c0000 4K rw--- [ anon ] b70c1000 8K r-x-- /lib/libkeyutils-1.2.so b70c3000 4K rw--- /lib/libkeyutils-1.2.so b70c4000 28K r-x-- /usr/lib/libkrb5support.so.0.1 b70cb000 4K rw--- /usr/lib/libkrb5support.so.0.1 b70cc000 136K r-x-- /usr/lib/libk5crypto.so.3.1 b70ee000 4K rw--- /usr/lib/libk5crypto.so.3.1 b70ef000 300K r-x-- /lib/libgcrypt.so.11.2.3 b713a000 8K rw--- /lib/libgcrypt.so.11.2.3 b713c000 80K r-x-- /usr/lib/libz.so.1.2.3.3 b7150000 4K rw--- /usr/lib/libz.so.1.2.3.3 b7151000 4K rw--- [ anon ] b7152000 60K r-x-- /usr/lib/libtasn1.so.3.0.12 b7161000 4K rw--- /usr/lib/libtasn1.so.3.0.12 b7162000 160K r-x-- /usr/lib/libgssapi_krb5.so.2.2 b718a000 4K rw--- /usr/lib/libgssapi_krb5.so.2.2 b718b000 8K r-x-- /lib/libcom_err.so.2.1 b718d000 4K rw--- /lib/libcom_err.so.2.1 b718e000 556K r-x-- /usr/lib/libkrb5.so.3.3 b7219000 8K rw--- /usr/lib/libkrb5.so.3.3 b721b000 1192K r-x-- /usr/lib/i686/cmov/libcrypto.so.0.9.8 b7345000 84K rw--- /usr/lib/i686/cmov/libcrypto.so.0.9.8 b735a000 16K rw--- [ anon ] b735e000 248K r-x-- /usr/lib/i686/cmov/libssl.so.0.9.8 b739c000 16K rw--- /usr/lib/i686/cmov/libssl.so.0.9.8 b73a0000 452K r-x-- /usr/lib/libgnutls.so.13.9.1 b7411000 20K rw--- /usr/lib/libgnutls.so.13.9.1 b7416000 88K r-x-- /usr/lib/libsasl2.so.2.0.22 b742c000 4K rw--- /usr/lib/libsasl2.so.2.0.22 b742d000 60K r-x-- /lib/tls/i686/cmov/libresolv-2.7.so b743c000 8K rw--- /lib/tls/i686/cmov/libresolv-2.7.so b743e000 8K rw--- [ anon ] b7440000 8K r-x-- /lib/tls/i686/cmov/libdl-2.7.so b7442000 8K rw--- /lib/tls/i686/cmov/libdl-2.7.so b7444000 36K r-x-- /lib/tls/i686/cmov/libcrypt-2.7.so b744d000 8K rw--- /lib/tls/i686/cmov/libcrypt-2.7.so b744f000 160K rw--- [ anon ] b7477000 28K r-x-- /lib/tls/i686/cmov/librt-2.7.so b747e000 8K rw--- /lib/tls/i686/cmov/librt-2.7.so b7480000 12K r-x-- /lib/libuuid.so.1.2 b7483000 4K rw--- /lib/libuuid.so.1.2 b7484000 124K r-x-- /usr/lib/libexpat.so.1.5.2 b74a3000 8K rw--- /usr/lib/libexpat.so.1.5.2 b74a5000 396K r-x-- /usr/lib/libsqlite3.so.0.8.6 b7508000 8K rw--- /usr/lib/libsqlite3.so.0.8.6 b750a000 120K r-x-- /usr/lib/libpq.so.5.1 b7528000 4K rw--- /usr/lib/libpq.so.5.1 b7529000 1172K r-x-- /usr/lib/libdb-4.6.so b764e000 8K rw--- /usr/lib/libdb-4.6.so b7650000 4K rw--- [ anon ] b7651000 48K r-x-- /usr/lib/liblber-2.4.so.2.0.5 b765d000 4K rw--- /usr/lib/liblber-2.4.so.2.0.5 b765e000 244K r-x-- /usr/lib/libldap_r-2.4.so.2.0.5 b769b000 4K rw--- /usr/lib/libldap_r-2.4.so.2.0.5 b769c000 8K rw--- [ anon ] b769e000 1316K r-x-- /lib/tls/i686/cmov/libc-2.7.so b77e7000 4K r---- /lib/tls/i686/cmov/libc-2.7.so b77e8000 8K rw--- /lib/tls/i686/cmov/libc-2.7.so b77ea000 12K rw--- [ anon ] b77ed000 80K r-x-- /lib/tls/i686/cmov/libpthread-2.7.so b7801000 8K rw--- /lib/tls/i686/cmov/libpthread-2.7.so b7803000 8K rw--- [ anon ] b7805000 136K r-x-- /usr/lib/libapr-1.so.0.2.11 b7827000 4K rw--- /usr/lib/libapr-1.so.0.2.11 b7828000 4K rw--- [ anon ] b7829000 100K r-x-- /usr/lib/libaprutil-1.so.0.2.11 b7842000 4K rw--- /usr/lib/libaprutil-1.so.0.2.11 b7843000 152K r-x-- /usr/lib/libpcre.so.3.12.1 b7869000 4K rw--- /usr/lib/libpcre.so.3.12.1 b786a000 4K r-x-- /usr/lib/apache2/modules/mod_authz_default.so b786b000 4K rw--- /usr/lib/apache2/modules/mod_authz_default.so b786c000 4K r-x-- /usr/lib/apache2/modules/mod_authn_file.so b786d000 4K rw--- /usr/lib/apache2/modules/mod_authn_file.so b786e000 24K r-x-- /usr/lib/apache2/modules/mod_auth_digest.so b7874000 4K rw--- /usr/lib/apache2/modules/mod_auth_digest.so b7875000 8K r-x-- /usr/lib/apache2/modules/mod_auth_basic.so b7877000 4K rw--- /usr/lib/apache2/modules/mod_auth_basic.so b7878000 8K r-x-- /usr/lib/apache2/modules/mod_alias.so b787a000 4K rw--- /usr/lib/apache2/modules/mod_alias.so b787b000 8K rw--- [ anon ] b787d000 4K r-x-- [ anon ] b787e000 104K r-x-- /lib/ld-2.7.so b7898000 8K rw--- /lib/ld-2.7.so bfd68000 76K rwx-- [ stack ] bfd7b000 8K rw--- [ anon ] total 119008K I have no idea what's going on. I've tried adjusting the usual parameters (MaxClients, MaxRequestsPerClient, etc, but those don't do anything.) Note, also, that this is memory usage on startup - it doesn't grow, it just starts like this and then stays more or less constant. Ideas?

  Read the article

• Download Instagram photos of any user on Windows, Mac & Linux using 4K Stogram

  - by Gopinath

  Instagram is one of most popular mobile applications used to take pictures and share them online. Initially released for iOS devices, Instagram quickly won the hearts of photographers and made into top 10 apps charts in Apple App Store. With a simple interface and quick photo processing features Instagram popularity grown by leaps and bounds. Few months ago after releasing an Android application,  Facebook acquired Instagram for around 1 billion dollars. Undoubtedly Instagram is the most popular photo sharing app on mobile devices and it’s where you find best photographers share their beautiful pictures online. Being the best source of photographs many users love to browse and download photographs. For those who are looking for downloading photographs from Instagram here is an excellent free desktop application – 4K Stogram. Once installed 4K Stogram, you will be able to quickly browse and download photographs of any user by just entering user name in search box and clicking on Follow button. The app quickly searches for the recent photographs and displays the thumbnails as it downloads them. You can double click on any photograph to view it with your Operating Systems default photograph viewer. Open the location of the photograph and you will find the rest of downloaded photos in the same folder. Once you enter name of the user, 4K Stogram automatically keeps tracking the user until you manually delete it. Also it automatically downloads the latest photographs when its launched again. Like this you can track multiple users and download their photographs Here is a quick run down of 4K Stogram features View and download photos of Instagram users No need to have Instagram account, just enter user name and download all photos Track multiple users and download their photos Automatically download latest photos All new photos are marked with an indictor for quick reference Free and open source desktop application that runs on Windows, Mac & Linux Link to 4K Stogram Application website

  Read the article

• HDD bad sectors with OS

  - by Michael Z

  I wonder is that possible for OS to make bad sectors on Hard Drive? Preface: I have bought new HDD on 1Tb WB Caviar Black. I have installed new OS on ext4 partition Ubuntu 12.04.1 LTS. After few days S.M.A.R.T. of the Ubuntu's Disk Utility show that my hard has bad sectors! I have checked on S.M.A.R.T. immediately after installing OS - all was OK. During new OS working I have noticed some strange with HDD - all OS was freezed from 20 sec to 1 min and I have heard like HDD's engine restarting. At the dmes I have found something like this: [40085.407947] ata1.00: device reported invalid CHS sector 0

  Read the article

• S.M.A.R.T. broken sectors

  - by Jeffrey Vandenborne

  Recently I received my hard drive (LaCie) that I've sent away for warranty, my disk failed, and I used Palimpsest Disk utility to check if anything was wrong in the S.M.A.R.T Status. And it said that there were a few broken sectors. So the next day, I went to the store and told the story. 4 weeks later I actually got my drive back. The first thing I did was plugging it in and starting the disk utility, and weirdly it showed me pretty much the exact same things, even the values of most tests were the same as they were before when my drive broke. The serial number is different though, but it does show a very peculiar value. Now I'm wondering, I'm almost sure it's the exact same drive and it still says I've got broken sectors, does it just say that because it has been cached in the drive somewhere while LaCie DID actually fix it? Or should I run the extended self test (which seems to take hours) first? Also I've tried the smartctl command tool, it says the drive has smart support, but it doesn't show anything, it says that it's enabled, but then it says that it's disabled, picture below The picture of the Disk utility: Thanks in advance

  Read the article

• Clone a 2TB WD Green internal drive with bad sectors to a 3TB partitioned external

  - by ron

  I have a 2TB WD Black drive and would like to simply do a straight clone from a failing 3TB drive to it. Both are SATA. Will I be able to just install the new drive alongside the faulty one and then do the clone/rescue attempt with ddrescue or is there a better method? The faulty internal drive mentioned has bed sectors although am usually able to boot into Windows 7 Ultimate with it and navigate and access all my programs. I have been attempting some trials with an Ubuntu Live CD using ddrescue but am not sure I'm doing it right. I have a 3TB WD my book essential external which is GPT and have created a separate 2TB partition on it which I am trying to clone to. I assume I need to format the new drive first to NTFS? Can I do that via the Ubuntu Rescue Remix 12-04 live DVD that I've been booting with?

  Read the article

• Pathfinding with MicroPather : costs calculations with sectors and portals

  - by Adan

  Hello, I'm considering using micropather to help me with pathfinding. I'm not using a discrete map : I'm working in 2d with sectors and portales. However, I'm just wondering what is the best way to compute costs with this library in this context. Just to be more clear about geometrical shapes I'm using : sectors are basically convex polygons, and portals are segments that lies on sector's edge. Micropather exposes a pure virtual Graph class that you must inherate and overrides 3 functions. I understand how pathfinding works, so there's no problem in overriding those functions. Right now, my implementation give me results, i.e I'm able to find a path in my map, but I'm not sure I'm using an optimal solution. For the AdjacentCost method : I just take the distance between sector's centers as the cost. I think a better solution should be to use the portal between the two sectors, compute its center, and then the cost should be : distance( sector A center, portal center ) + distance ( sector B center, portal center ). I'm pretty sure the approximation I'm using with just sector's center is enough for most cases, but maybe with thin and long sectors that are perpendicular, this approximation could mislead the A* algorithm. For the LeastCostEstimate method : I just take the midpoint of the two sectors. So, as you understand, I'm always working with sectors' centers, and it's working fine. And I'm pretty sure there's a better way to work. Any suggestions or feedbacks? Thanks in advance!

  Read the article

• 4K-sector drives and Linux

  <b>LWN.net:</b> "Recently, there have been a number of reports that Linux is not ready to work with these drives; kernel developer Tejun Heo even posted an extensive, worth-reading summary stating that "4 KiB logical sector support is broken in both the kernel and partitioners.""

  Read the article

• will reformatting my hard drive fix bad sectors on it?

  - by devilHeroe

  will reformatting my hard drive fix bad sectors on it? assuming im not concerned with the data on it....

  Read the article

• How to force a remap of sectors reported in S.M.A.R.T C5 (Current Pending Sector Count)?

  - by edgh

  The S.M.A.R.T C5 value of my Samsung HM640JJ Hard Drive (in an HP Pavilion dv6 laptop) is "yellow status = caution" C5 was 10 yesterday, and it's 21 today. C4 (Reallocation Event Count) = 0 and 05 (Reallocated Sectors Count) = 0 How can I force the firmware to reallocate them? I removed the partitions, recreated them again and formatted the entire drive. I ran chkdsk /r /f I ran the BIOS disk check utility and other diagnose/repair tools

  Read the article

• Recover files from NTFS drive with bad sectors

  - by Martin

  A few nights ago I have created a backup of my data on an external 500 GB NTFS USB hard drive. I have then formatted my computer, reinstalled Ubuntu and started transferring back the data from the external HDD. Unfortunately some files have became corrupted and Ubuntu is unable to copy them over. The same issue happens if I login using Windows 7. Disk Utility detects with SMART that there are "a few bad sectors". Some of files are perfectly intact, but other files cannot be accessed (nor read, copied...) although they are displayed within nautilus and show the correct file size. Is there anything I can do to recover this data? I have thought of using TestDisk but this utility seems more useful for repairing lost partitions or deleted files. I have also thought of using ddrescue so I could at least have a low level copy of the disk but I am not sure what use to make of it in order to recover the data!!!

  Read the article

• hard drive sectors vs. tracks

  - by Phenom

  In one rotation, how many sectors are passed over and how many tracks are passed over? If you know the average value of sectors per track for a hard drive, how do you use this to estimate the number of cylinders? Do all modern hard drives have 63 sectors per track? Are there any hard drives that have more than this?

  Read the article

• External USB Drive

  - by ErocM

  I have a server that I hooked up an external USB drive. It was formatted in windows and has files on it already. I'm new to Ubuntu so please be patient... I have two questions: Will Ubuntu see the drive since it was formatted in windows? How do I mount this drive or rather, how do I know it's seen by Ubuntu? Thanks! I did fdisk -l and this is what I have but I don't see it. It's a 1tb drive: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001eb47 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/mapper/ubuntu-root: 316.6 GB, 316577677312 bytes 255 heads, 63 sectors/track, 38488 cylinders, total 618315776 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ubuntu-root doesn't contain a valid partition table Disk /dev/mapper/ubuntu-swap_1: 3217 MB, 3217031168 bytes 255 heads, 63 sectors/track, 391 cylinders, total 6283264 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 this is an external USB hard drive not a thumb drive :)

  Read the article

• scan partition for bad blocks

  - by user22559

  Hello everyone I have a hard disk with bad sectors on it. I want to partition the drive so that the partitions are in the good part of the hard disk, and the parts that have bad sectors are not used. The first ~20GB of the hard disk are good. Then comes a ~13GB part that is riddled with bad sectors. After that, the hard disk is good again, but at the very end there is a ~2GB part with bad sectors. I have used an app called "Hdtune" to get this information, and I have created a 19GB c: partition at the beginning of the drive, then skipping the 13GB of bad sectors, then creating the D: partition that spans the rest of the disk, minus the last 2GB. The C: partition works well (i have been using it for a month and i have got no error whatsoever), but the D partition has been giving me problems. Somehow, it seems that I have some bad sectors in the D: partition. I am looking for an app that scans the HDD, finds the bad blocks, and shows them in a map so I can see if they are in the D partition. Or, an app that scans only a specified partition for bad sectors, and then shows in a map where the bad sectors are in the partition. I want to know this so I can resize the D partition so that it is outside of the bad area of the disk.

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video. Any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• System randomly freezes yet mouse still moves, SSD out of reallocatable sectors, should I replace it?

  - by user784446

  This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

  Read the article

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

• Ubuntu 12.04 boot degraded raid

  - by beacon_bonanza

  I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails. I've tried to copy the MBR from disk 1 to 2: dd if=/dev/sda of=/dev/sdb bs=512 count=1 but this didn't make a difference. Any ideas how to get it to boot from just the second disk? fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sda1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sda2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sdb1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sdb2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00035b05 Device Boot Start End Blocks Id System /dev/sdd1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c73aa Device Boot Start End Blocks Id System /dev/sdc1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/md1: 1984.3 GB, 1984264208384 bytes 2 heads, 4 sectors/track, 484439504 cylinders, total 3875516032 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2: 2000.3 GB, 2000263380992 bytes 2 heads, 4 sectors/track, 488345552 cylinders, total 3906764416 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0: 16.0 GB, 15990652928 bytes 2 heads, 4 sectors/track, 3903968 cylinders, total 31231744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

  Read the article

• Oracle BI Applications for Industry Sectors

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE Oracle BI Applications already provide pre-built line-of-business analytic applications to over 4,000 customers: these expose the data otherwise locked inside ERP and CRM applications, giving the business user the analytics they need, and a greater ability to self-service ad-hoc queries. Now you can also take advantage of the pre-built Oracle BI Applications approach for industry sector specific analytics to streamline your client’s operations, offer better services, and increase profit margins. Find out more at http://www.oracle.com/us/solutions/business-analytics/analytic-applications/industry/overview/index.html. Retail Education Oracle Retail Merchandising Analytics Oracle Student Information Analytics Oracle Retail Customer Analytics Public Sector Financial Services Oracle Tax Analytics Oracle Financial Analytics Manufacturing Health Care Oracle Manufacturing Analytics Oracle Enterprise Healthcare Analytics Asset Intensive Oracle Clinical Development Analytics Oracle Enterprise Asset Management Analytics Oracle Operating Room Analytics Related Links Health Sciences Analytic Applications for Your Business Role Oracle Health Sciences Clinical Development Analytics Analytic Applications for Your Product Line Oracle Argus Analytics Oracle Business Intelligence Tools and Technology Communication Oracle Exalytics In-Memory Machine "The adoption of Oracle Financial Services Analytic Applications is of great significance to the bank's transition to more rigorous and risk-averse management practices."Yang Changxue, Project Manager Oracle Communications Data Model /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid windowtext 1.0pt; mso-border-alt:solid windowtext .5pt; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-border-insideh:.5pt solid windowtext; mso-border-insidev:.5pt solid windowtext; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• suggestions for migrating a windows 7 install to a new 4K sector disk

  - by myCubeIsMyCell

  Hi, I'm looking to upgrade the disk on a windows 7 box to a new larger drive. In the past for such migrations I'd just hook both drives up and use a linux boot disk and use dd to copy from one disk to the next... boot up the new drive & expand the partition. The drive I just purchased however is a western digital using 4k sectors... not sure if there'd be any complications using my old method moving from a 512b sector drive. Current plan is to try the migration by doing a win7 system image backup to an external drive... then restore the image to the new drive via system restore boot disk. Any suggestions or recommendations on how to best complete this migration would be greatly appreciated. Thanks!

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >