Search Results

Search found 29 results on 2 pages for 'bricked'.

Page 1/2 | 1 2  | Next Page >

  • While updating the firmware on my parent's WNR3500v1, I bricked it

    - by Matt
    While updating the firmware on my parent's WNR3500v1, I bricked it. Basically, all that happens now is the power light just flashed. I tried pressing the factory reset button for up to a minute with the power on as well as with the power off. To no avail. Is there anything that can be done other than try to RMA it? Googling around, I found nothing promising. I'm wondering if anyone else has any other solution.

    Read the article

  • Bricked - tty mode incorrect, terminal disabled, unity broken

    - by user989805
    After installing VirtualBox unity seems to be uninstalled.. Launcher and task bar are missing. I can't access terminal from the normal ctrl alt T command. I tried logging into TTY mode but it says my login is incorrect. I am trying to login with my normal ubuntu username and password. I have searched for solutions but since I dont have terminal or TTY I cant bash out any commands, and I have tried safeboot but the root terminal always says it cant run whatever command I enter. I am really lost and I am trying to avoid a fresh install :( I greatly and genuinely appreciate any help! This is the computer I use for college!

    Read the article

  • Nexus 7 Possibly Bricked

    - by user214186
    I have a 1st gen Nexus 7 (32GB). I used the steps at https://wiki.ubuntu.com/Nexus7/Installation to successfully install Ubuntu 13.04 desktop onto the tablet. It was working fine and then I decided to upgrade to Ubuntu Touch. I booted the tablet into fast boot mode but the commands 'adb devices' and 'sudo fastboot devices' would not see the device. I am performing these steps from an Ubuntu 12.04 desktop PC. Prior to installing 13.04 the device was seen fine. I made the mistake of performing the 'Device factory reset' step from https://wiki.ubuntu.com/Touch/Install - Step 2. Now when I try to boot the device I get the following: mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /dev on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Targe filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.20.2 (Ubuntu 1:1.20.0-0ubuntu1) built-in shell (ash) Enter help for a list of built-in commands. (initramfs) I have searched the web but every reference to this problem is from people who still have ADB access to the device so they can recover by flashing the tablet again. I can attach a keyboard to the USB port and access the BusyBox console but I don't know what steps to do to recover from my error. Any suggestions would be helpful. Thanks

    Read the article

  • Upgrade went wrong, laptop essentially 'bricked'

    - by hexagonheat
    I have an old netbook I was trying to upgrade from 10.04 to 10.10. Ubuntu was in the process of upgrading when everything completely froze. I left it sit for an hour but it would not respond to anything. So I powered down the machine and it didn't have the necessary files to run Ubuntu. I went to the terminal and it told me to put in some command that I can not remember to 'rebuild' something. That takes me to now, when I turn on the laptop it comes up with a screen "GNU GRUB version 1.98+20100804-5ubuntu3.3" and has a bunch of options such as: 1. Ubuntu, with Linux 2.6.35-32-generic 2. Ubuntu, with Linux 2.6.35-32-generic (recover mode) etc. (there are like 15 of these with different numbers after 2.6.35 and the word 'generic'. It doesn't seem to matter what I pick, it will go to the "Ubuntu" loading screen with the colored dots but then every time it will freeze and I have to reboot to the same thing. I can't seem to get a terminal prompt anywhere either. Any ideas? I can't think of what to do :(

    Read the article

  • Have I bricked my Sun V20z?

    - by David Mackintosh
    I have a small pile of Sun V20z computers. I was trying to update the SP and BIOS firmwares in order to bring them all up to the same standard -- mostly to get the updated (ie actually useful) SP functionality, and figured that I would just do the BIOS while I was at it. For three of the four computers, it worked perfectly. However after the BIOS update, the fourth system won't boot. I did this: batch05-mgmt $ sp get mounts Local Remote /mnt 10.16.0.8:/export/v20z batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Bios Flash Transmit Started Bios Flash Transmit Complete Bios Flash update Progress: 7 Bios Flash update Progress: 6 Bios Flash update Progress: 5 Bios Flash update Progress: 4 Bios Flash update Progress: 3 Bios Flash update Progress: 2 Bios Flash update Progress: 1 Bios Flash update complete batch05-mgmt $ platform set power state on This command may take several minutes. Please be patient. After an hour of waiting, it still won't start. The chassis powers on, but beyond the fans spinning up and the hardware POST of the drives, nothing appears to happen. So if I try to re-flash the BIOS (on the theory that maybe something went wrong): batch05-mgmt $ platform set os state update-bios /mnt/sw_images/platform/firmware/bios/V1.35.3.2/bios.sp This command may take several minutes. Please be patient. Bios started Error. The operation timed out. Have I bricked it?

    Read the article

  • laptop motherboard "shorts" when connected to adapter

    - by Bash
    Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

    Read the article

  • How to recover a Linksys WRT54GL router that has a blinking green power LED and no response from the

    - by Peter Mounce
    I was flashing the router with the Tomato firmware, but something went wrong; I'm not sure what. Now, the router responds to ping at 192.168.1.1 (my Mac's on a static IP 192.168.1.21), but the web-interface doesn't come up. I have read that this situation is recoverable in a [couple of places][2], but I haven't been having much success and so I wondered whether anyone could help. From my Mac (OSX 10.5) I have tried to tftp a new vanilla-Linksys firmware to the router and reboot; according to the trace, this sends it but the router behaves no differently after a reboot. I've read that if boot_wait is turned on, I'll have an easier time, but I haven't been able to find any instructions that tell me how I can tell whether I did this or not (I don't think I have, but I might have, when I tinkered the first time months ago - the router has worked since then, though). I have found a couple of references to [something called JTAG][3], which seems like some kind of [homebrew diagnostic cable thing][4], but that's a little beyond my ken. Happy to try it, with muppet-level instructions, though (I do software, not hardware!). So, I'm at a bit of a loss, really, and wondered whether anyone could provide me with the route (ha. ha.) out of this mess? Hm, I can't post all the links I wanted to until I have some more reputation.

    Read the article

  • HTG Explains: What Does “Bricking” a Device Mean?

    - by Chris Hoffman
    When someone breaks a device and turns it into an expensive brick, people say they “bricked” it. We’ll cover exactly what causes bricking and why, how you can avoid it, and what to do if you have a bricked device. Bear in mind that many people use the term “bricking” incorrectly and refer to a device that isn’t working properly as “bricked.” if you can easily recover the device through a software process, it’s technically not “bricked.” Image Credit: Esparta Palma on Flickr HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • How to recover ~1TB data from a bricked NAS?

    - by alastairs
    I bought an IcyBox NAS a little while back, and it recently died on me. I have physical access to the disks inside (1.5TB RAID 1 array), and the box was running a version of Linux. I now have the difficulty of retrieving the data from the disks. All I have available are 2 Windows machines, one of which has sufficient free space to hold the data from the NAS. What would be the quickest and easiest way to retrieve the data from the disks?

    Read the article

  • How to find the static ip address of my router?

    - by OSX NINJA
    I bricked my Linksys WRT54GS router when trying to change the firmware on it from dd-wrt to open-wrt. In order to unbrick it, I need to be able to do an ftp transfer to it. The problem is that it isn't using DHCP addressing and I can't just use the default ip address of 192.168.1.1. I have to use the ip address it was set at before it got bricked. The problem is I forgot what that number was. Is there some program or script that can find it out?

    Read the article

  • Setting up a laptop hard drive as a secondary on a tower?

    - by vermiculus
    I'm trying to install Windows 8 for a friend who has recently bricked a laptop hard drive. The new one is OEM so there is no OS - I need to be able to stick it in to my tower and load the new OS on it. Both bricked and replacement laptop hard drives are SATA and connect to my mobo just like any other. After I post this I'm going to check the BIOS and see if it shows up, but so far I don't have it showing up in Disk Management. Any ideas would be greatly appreciated.

    Read the article

  • How to find the static ip address of my router? [migrated]

    - by Wintermute
    I bricked my Linksys WRT54GS router when trying to change the firmware on it from dd-wrt to open-wrt. In order to unbrick it, I need to be able to do an ftp transfer to it. The problem is that it isn't using DHCP addressing and I can't just use the default ip address of 192.168.1.1. I have to use the ip address it was set at before it got bricked. The problem is I forgot what that number was. Is there some program or script that can find it out?

    Read the article

  • Flashing your Windows Phone Dummies

    - by Martin Hinshelwood
    The rate at which vendors release new updates for the HD2 is ridiculously slow. You have to wait for Microsoft to release the new OS, then you wait for HTC to build it into a ROM, and then you have to wait up to 6 months for your operator to badly customise it for their network. Once Windows Phone 7 is released this problem should go away as Microsoft is likely to be able to update the phone over the air, but what do we do until then? I want Windows Mobile 6.5.5 now!   I’m an early adopter. If there is a new version of something then that’s the version I want. As long as you accept that you are using something on a “let the early adopter beware” and accept that there may be bugs, sometimes serious crippling bugs the go for it. Note that I won't be responsible if you end up bricking your phone, unlocking or flashing your radio or ROM can be risky. If you follow the instructions then you should be fine, I've flashed my phones (SPV, M300, M1000, M2000, M3100, TyTN, TyTN 2, HD2) hundreds of times without any problems! I have been using Windows Mobile 6.5.5 before it was called 6.5.5 and for long enough that I don’t even remember when I first started using it. I was using it on my HTC TyTN 2 before I got an HD2 a couple of months before Christmas, and the first custom ROM’s for the HD2 were a couple of months after that. I always update to the latest ROM that I like, and occasionally I go back to the stock ROM’s to have a look see, but I am always disappointed. Terms: Soft Reset: Same as pulling out the battery, but is like a reboot for your phone Hard Reset: Reinstalls the Operating system from the Image that is stored on it ROM: This is Image that is loaded onto your phone and it is used to reinstall your phone whenever you do a “hard reset”. Stock ROM: A ROM from the original vendor… So HTC Cook a ROM: Referring to Cooking a ROM is the process a ROM developer goes through to take all of the parts (OS, Drivers and Applications) that make up a running phone and compiling them into a ROM. ROM Kitchen: A place where you get an SDK and all the component parts of the phone: OD, Drivers and Application. There are usually lots of Tools for making it easier to compile and build the image. Flashing: The process of updating one of the layers of your phone with a new layer Bricked: This is what happens when flashing goes wrong. Your phone is now good for only one thing… stopping paper blowing away in a windy place. You can “cook” you own ROM using one of the many good “ROM Kitchens” or you can use a ROM built and tested by someone else. I have cooked my own ROM before, and while the tutorials are good, it is a lot of hassle. You can only Flash new ROM’s that are specifically for your phone only so find a ROM for your phone and XDA Developers is the best place to look. It has a forum based structure and you can find your phone quite easily. XDA Developer Forum Installing a new ROM does have its risks. In the past there have been stories about phones being “bricked” but I have not heard of a bricked phone for quite some years. if you follow the instructions carefully you should not have any problems. note: Most of the tools are written by people for whom English is not their first language to you will need concentrate hard to understand some of the instructions. Have you ever read a manual that was just literally translated from another language? Enough said… There are a number of layers on your phone that you will need to know about: SPL: This is the lowest level, like a BIOS on a PC and is the Operating Systems gateway to the hardware Radio: I think of this as the hardware drivers, and you will need a different Radio for CDMA than GSM networks ROM: This is like your Windows CD, but it is stored internally to the Phone. Flashing your phone consists of replacing one Image with another and then wiping your phone and automatically reinstall from the Image. Sometimes when you download an Image wither it is for a Radio or for ROM you only get a file called *.nbh. What do you do with this? Well you need an RUU application to push that Image to your phone. The RUU’s are different per phone, but there is a CustomRUU for the HD2 that will update your phone with any *.nbh placed in the same directory. Download and Instructions for CustomRUU #1 Flash HardSPL An SPL is kind of like a BIOS, and the default one has checks to make sure that you are only installing a signed ROM. This would prevent you from installing one that comes from any other source but the vendor. NOTE: Installing a HARD SPL invalidates your warranty so remember to Flash your phone with a “stock” vendor ROM before trying to send your phone in for repairs. Is the warranty reinstated when you go back to a stock ROM? I don’t know… Updating your SPL to a HardSPL effectively unlocks your phone so you can install anything you like. I would recommend the HardSPL2. Download and Instructions for HardSPL2 #2 Task29 One of the problems that has been seen on the HD2 when flashing new ROM’s is that things are left over from the old ROM. For a while the recommendation was to Flash a stock ROM first, but some clever cookies have come up with “Task29” which formats your phone first. After running this your phone will be blank and will only boot to the white HTC logo and no further. You should follow the instructions and reboot (remove battery) and hold down the “volume down” button while turning you HD2 on to enter the bootloader. From here you can run CustomRUU once the USB message appears. Download and Instructions for Task29 #2 Flash Radio You may need to play around with this one, there is no good and bad version and the latest is not always the best. You know that annoying thing when you hit “end call” on your phone and nothing happens? Well that's down to the Radio. Get this version right for you and you may even be able to make calls. From a Windows Mobile as well Download There are no instructions here, but they are the same as th ROM, but you use this *.nbh file. #3 Flash ROM If you have gotten this far then you are probably a pro by now Just download the latest ROM below and Flash to your phone. I have been really impressed by the Artemis line of ROM’s but it is no way the only choice. I like this one as the developer builds them as close to the stock ROM as possible while updating to the latest of everything. Download and Instructions for  Artemis HD2 vXX Conclusion While updating your ROM is not for the faint hearted it provides more options than the Stock ROM’s and quicker feature updates than waiting… Technorati Tags: WM6

    Read the article

  • Can you boot an Acer Aspire One from an SD card when no BIOS is available?

    - by henrijs
    Is it possible to boot the Acer Aspire One PC from an SD card? I have bricked an Aspire One, but it does not even start the BIOS. Aspire One have this issue and a BIOS update usually work and it helped me once in the past, but this time it's all over, and the BIOS update fails. It still reads the SD card with the magic Ctrl + Esc shortcut used to launch the BIOS update. Can I trick the computer into booting somehow using this shortcut?

    Read the article

  • WP7–Samsung Owners Should Hold Off on the Update

    - by D'Arcy Lussier
    Microsoft released an update for WP7 that’s meant to improve updating the devices going forward. They’ve identified a glitch though, specifically with Samsung phones. From Winrumors: A number of Windows Phone 7 users applied the patch on Monday and some Samsung Omnia owners devices have been left in a “bricked” state. Devices simply instruct users to connect them to a PC, hard resetting the device or connecting it to a PC does not appear to solve the issue. Microsoft has also been advising users with broken devices to return them to stores for exchange. The scary thing about this is the resolution: return the “broken” devices to stores for exchange. Many Samsung Focus owners in Canada purchased unlocked phones from the US, and supposedly that act alone voided the warranty. So applying the update has very dire implications for those who might be left with a very pretty brick. I’m going to wait until there are successful installs of the patched update before going ahead with it on my device.

    Read the article

  • wii programming

    - by harald
    hello, my daughter just got a wii for christmas from her parents and her father has nothing better to do than looking for ways to dive into wii programming. i already read a lot about "homebrew" and wii. but i seem to be unable to find answers for the most important questions: do i have to modify the firmware to get the homebrew stuff to work? how likely is it, that the wii get's bricked, if for example there are any nintendo firmware updates? thanks very much!

    Read the article

  • How to set a management IP on a Dell powerconnect 5524/5548 switch?

    - by John Little
    When you first power on a 5524, connected via the serial console, you are offered a setup wizard where you can enter the management IP/Net/Gateway and enter the admin password. HOWEVER, if you dont do this in 60 seconds, the wizard dissapears, and there seems to be no way to run it again - even if you reboot the box. No commands work in the CLI, it just gives you this prompt: If you type say enable, or login, it gives: >login Unknown parameter May be one from the following list: debug help So no commands seem to work. The CLI reference guide does not seem to have any way to run the wizard, or to set the management port or admin passwords. So by not responding in 60 secons after boot, the unit is bricked. Any ideas?

    Read the article

  • Linksys WRT54GS V6 Router Blinking Power Light

    - by Frank
    I have a Linksys WRT54GS V6 Router in my possession got it at my local goodwill for 5$. Upon start up the Power LED starts flashing like crazy and at the same time the Ethernet ports all light up once then turn off (DMZ and WLAN never turn on). I can ping the router only by setting a static IP on my Pc. I can also successfully push a file (official Linksys OS and DD-wrt) into it via TFTP but this currently does nothing (no 192.1681.1 Access). Any ideas as to what may be wrong? I think its pretty obvious that it's bricked but.. I keep hearing a whole lot of "if it pings it's fixable" on the internet.

    Read the article

  • SEAGATE Barracuda 7200.11 HDD not running

    - by Dane411
    After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

    Read the article

  • LiveCD/USB boot issues with Ubuntu 12.04 on blank drive

    - by Richek
    Not sure how common this issue is, or even how badly I may be missing something simple, but I am a first time usuer having some serious problems. Some background: old HDD running Windows 7 developed too many bad sectors and is bricked. I'm attempting to install Ubuntu 12.04 on a fresh 1TB drive by booting from a liveCD USB flash drive. I've not been able to get past the initial menu screen, however, as the process stalls out shortly after selecting an option (both boot from drive and install to drive). I've tried multiple USB drives as well as CDs, modified the boot order, flashed BIOS, and even tried booting with only the flash drive and the keyboard connected with the same results.Typically what I observe is that the OS begins what I think is compliling, listing drivers and components before freezing on one. When the keyboard is plugged in, its the keyboard driver, before I flashed BIOS, it was a BIOS related item, now its an unknown entry. The computer seems to be reading the drive (idicated by USB light flashing or CD drive reving) for roughly 10 minutes with no progress, followed by the drives going quiet. Some spec info: Motherboard: ASUS P5Q Pro, BIOS version 2102 (latest version), Intel chipset CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz help would be appriciated!

    Read the article

  • 'Unable to mount Filesystem' Error

    - by Charles
    Trying to extract data from a 'bricked' Western Digital MyBook Live 2tb drive. I came across a forum that advised to use Ubuntu (booted from a CD) on my Macbook. Managed to download and create a boot CD for Ubuntu (like this little operating system btw). Booted the machine with the CD and plugged the drive (which I had extracted from it's casing and placed into a external USB SATA case & plugged to the laptop). The drive is seen by Ubuntu but each time I click on the drive, it gives me the following error: Unable to mount 2.0 TB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog -try dmesg | tail or so I am new to this and spent quite some time searching this site to see if I could find a solution to this problem without troubling anyone. I came up with a few that came close but some of the questioners mentioned that they had lost data...which scared me from going further. I need to basically extract 1 particular folder from the drive. If I can get to mount this volume 'sdb4', there is a folder called 'My_Work' which I need to back up. The rest I have/had a copy of. When I typed in dmesg | tail...I got several lines..but I think ones that are relevant are: [ 406.864677] EXT4-fs (sdb4): bad block size 65536 [ 429.098776] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 439.786365] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 445.982692] EXT4-fs (sdb4): bad block size 65536 [ 1565.841690] EXT4-fs (sdb4): bad block size 65536 I read somewhere to try/check 'sudo fdisk -l /dev/sdb4'. It gave me the following result: Disk /dev/sdb44: 1995.8 GB, 1995774623744 bytes 255 heads, 63 sectors/track, 242639 cylinders, total 3897997312 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb4 doesn't contain a valid partition table This is where I reached and got frustrated and decided to try & get help on this without digging myself deeper into a hole! I understand that the answer may already be out there. If so, could someone please point me in the right direction. And if not, could someone please resolve (if possible) my situation!

    Read the article

  • ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

    - by ewwhite
    I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

    Read the article

  • Hide account from login screen but can be used in UAC

    - by tvanover
    So I have a Windows 7 home machine with 2 user accounts. One is a standard user account and one is an administrator account. Now this is going to be put in the hands of a very low-tech user so I don't want them to be able to see the administrator account on logon, but they want to have a password to prevent someone else from using the machine. My goal is that when the user turns on the computer, they are presented with their login. After logging in to their non-administrator account, if something needs to be installed then the administrator account can be used through UAC. I have tried creating the reg key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList and adding a dword of the account name and set it to 0. It succeeded in hiding the account from th login screen. As well as hiding it from UAC. So it fails the second requirement, of being able to run things as administrator through UAC. Also since I didn't set an administrator password (left it blank) it seems that I have completely locked myself out of the machine since runas doesn't accept blank passwords. So I also cannot undo it, and have quite effectively bricked the install, prompting an OS reinstall. This is Windows 7 Home, so there is no Users management console.

    Read the article

1 2  | Next Page >