Search Results

Search found 306 results on 13 pages for 'bsod'.

Page 1/13 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • PC: Quick Freeze, then BSOD, then forced reboot, then freezes again

    - by cr0z3r
    Lately I have been experiencing a weird issue. My PC will hang for a second and then BSOD - it stays there, so I have to reboot. Once Windows starts again and I'm logged in, after 1-10min it freezes again, this time without BSOD. RECAP: 1 second freeze BSOD, hangs there I have to force-reboot Once PC rebooted, I log back into Windows second freeze between a 1-10min range, no BSOD (alternatively, I get a freeze with a constant sound/noise, no BSOD) I contacted my PC provider, who told me my graphics-card might be flawed (Quadro 4000), so I used a Quadro 2000 that they lend me. The issue still occurred. The issue now seemed to belong to a flawed RAM module. Following my provider's steps, I removed all but the first from the left column and kept using my PC for a week or so without any issues. I then added the bottom-right module, and so on, until all modules were back inside - I had no problems. Now it seemed that a simple take-out-put-back-in of the RAM modules had fixed the issue. However, after a few months, the issue was back. I redid all the RAM-swapping I had done before, and concluded that the lower-right module was flawed. My provider changed it for another, and everything was great until now. My PC froze again for barely a second, hanged on a BSOD, I rebooted it, logged-in to Windows to get a freeze (without BSOD or reboot) 40 seconds later. Something worth noting, is that every time I reboot after the BSOD, it is something within Chrome that freezes my PC (e.g. this time I clicked the "restore" button as Chrome mentioned it had exited unexpectedly - from the previous freeze obviously - and it instantly froze). Finally, the Event Viewer lists 2 critical events in the past hour as "ID: 41, Type: Kernel-Power". PC-Specs: http://i.imgur.com/VZpbr.jpg Previous Dump-files: https://dl.dropbox.com/u/716600/DumpFiles_08_2012.zip I would like to thank anybody in advance for your help. You're great. UPDATE 1: I realized that I did not mention an awkward fact about this issue. After I have gotten the 1-sec freeze followed by a BSOD, after I rebooted because the BSOD hanged, and after I logged back in to get another (this time, eternal) freeze and rebooted once again, the PC does not boot back up. The power-light is on, but my monitor says "no signal", as if the PC wouldn't really be turned on. This truly seems a like a power-related issue, doesn't it? UPDATE 2: I just got a freeze, but without BSOD. My screen froze (while on Chrome, which is starting to seem suspicious to me) with an ongoing sound/noise. I had to force-reboot my PC. I would say this is a graphics-card issue, but this issue also happened when I was using the Quadro 2000 from my provider. UPDATE 3: I just got a BSOD while trying to render something (quite heavy, actually) in 3ds Max 2012. I left the BSOD "running", as it said it was writing dump files to disk. However, the percentage number stayed at 0, so after 15 minutes I force-rebooted. I then used the software WhoCrashed (thank you Dave) which reported the following from the C:\Windows\Memory.dmp file: On Thu 22.11.2012 22:13:45 GMT your computer crashed crash dump file: C:\Windows\memory.dmp uptime: 01:05:27 This was probably caused by the following module: Unknown () Bugcheck code: 0x124 (0x0, 0xFFFFFA80275AC028, 0xF200001F, 0x100B2) Error: WHEA_UNCORRECTABLE_ERROR Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: Unknown . Google query: Unknown WHEA_UNCORRECTABLE_ERROR

    Read the article

  • Resolving a BSOD/CPU/GPU issue...

    - by Christian Sciberras
    Hello all, I'm getting a BSOD / system crash (sometimes the PC just quits without a BSOD). Hardware Specifications cpu: i7 920 2666MHz / 8 cores (not OCed afaik) mobo: Asus P6T SE ram: 2x Corsair CM3X2G1333C9 (64bit DDR3 667MHz) gfx: ATI Radeon HD 5970 1GB (XFX HD5970 BE) os: Windows 7 Ultimate 64 bit (legit) All bios, firmware and drivers are all up to date (as of today). Symptoms Sometimes the PC runs smoothly, sometimes I get this BSOD. The BSOD always happens when I'm doing something related to graphics, such as viewing a video or playing a game. I get to know about the imminent BSOD ~10 seconds earlier; the PC starts freezing occasionally but increasing in frequency and length of lag (I noticed processor usage in creased from Process Monitor). I've tweaked BIOS settings occasionally but afaik, it was in vain. A day or so ago, I reset it to factory settings. BSOD contents The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xfffff88001f35180, 0x0000000000000004). 15-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 4 23-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 2 Important The interesting thing is that although the event log (and BSOD screen) blame a "secondary processor", Windows Action Center sometimes blamed the GFX driver (for the same error). Also It is interesting to note that after hibernating my PC, I always get the BSOD.

    Read the article

  • BSOD on windows 7 with SSD during boot after improper shutdown

    - by Bob
    I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

    Read the article

  • 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

    - by Arch Angel
    Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

    Read the article

  • Windows 7 BSOD when changing power plan

    - by dd5
    i have a strange problem. When i want to change the power plan on my laptop from High performance to Balanced, Windows freezes and i get bsod. The power plan settings are all default. Laptop specs: - Intel Core i3 330M/350M - Intel® HM55 Express Chipset - DDR3 1066 MHz SDRAM 8GB - ATI Mobility™ Radeon HD5730 1GB DDR3 VRAM - Intel SSD330 128gb - Windows 7 Home premium I've searched the internets but couldnt find a similar issue. BSOD first started when i installed this SSD and stopped when i've updated the chipset controller driver then started again yesterday when i wanted to change the power settings plan.Minidump file here. Any help with this weird issue appriciated, thanks. Edit: - i've ran Memory diagnostic tool, - Intel SSD diagnostics - and updated the firmware to 3.2.1. Non of these steps worked or shown signs of errors - but still got BSOD when changing power plan settings. After analizing the dump file via osronline.com here a first few lines: CRITICAL_OBJECT_TERMINATION (f4) A process or thread crucial to system operation has unexpectedly exited or been terminated. Several processes and threads are necessary for the operation of the system; when they are terminated (for any reason), the system can no longer function. Arguments: Arg1: 0000000000000003, Process Arg2: fffffa8008661b30, Terminating object Arg3: fffffa8008661e10, Process image file name Arg4: fffff800033de270, Explanatory message (ascii) -- Solution -- Provided by Vinayak: After installing the Intel Rapid storage Technology from MajorGeeks, i didn't experience a BSOD since, thank you :)

    Read the article

  • WHEA_UNCORRECTABLE_ERROR BSOD - what is wrong?

    - by Arcane
    Hello I have a problem with my PC getting the WHEA_UNCORRECTABLE_ERROR bsod. It is a few months old pc. I am not overclocking or changing anything in bios, but sometimes (this is my third time) I get this bsod out of nowhere. This last time I was just watching some stream on twitch when the pc suddenly crashed. I have everything up to date in windows update and every other driver as well. Everything in Open hardware Monitor seems ok. Right now as of 10 min after the crash, the CPU temp is at 38°C, fans are at 1400RPM I am using Windows 8.1 Pro 64b. Here are my spec: Intel i5-4570 CPU @ 3.20GHz, Kingston HyperX 8GB DDR3 1600 XMP, GeForce GTX 660 with 340.52 drivers, Corsair VS450 power supply, Gigabyte GA-H87-HD3 you can see the BSOD dump here: https://www.dropbox.com/s/88i1q2nnqnpzux1/082514-29656-01.dmp?dl=0 Can anybody tell me what is wrong?

    Read the article

  • Different BSOD every time I turn on computer

    - by Gemboz
    Please help. Every time I turn on computer I receive a different BSOD. I can't even give my computer info because I haven't been able to stay on it long enough. The following are the BSOD that I just received in the last hour. IRQL_NOT_LESS_OR_EQUAL PAGE_FAULT_IN_NONPAGED_AREA BAD_POOL_HEADER MEMORY_MANAGEMENT I has also started with Windows Error Recovey which I have done but that has froze on me or hasn't helped. I have also reset computer to its original state. Now as soon as I turn on it goes to a BSOD almost immediately. I know you need more info about computer, so if you can tell me what info it is you need, I will get it. I can tell you that it is a desktop.

    Read the article

  • BSOD after PC has been running for a while

    - by user1389999
    I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

    Read the article

  • BSOD Code 16, artifacts all over the place (gtx 260)

    - by belinea
    I have a following, quite dated rig E8400 Core 2 Duo cpu Intel Dragontail Peak DP35DP motherboard on Intel Bearlake P35 chipset 4GB ram Geforce 260gtx Corsair 650W PSU Windows 7 64 bit The following things has happened in the last few days. I first decided to update my Nvidia drivers to the latest version. That was 4 days ago. PC worked fine for 2 days and I was able to play few games as well without any problems. Then 2 days ago a first crash happened while playing the new XCOM game. BSOD code 16. Just the blue screen, no artifacts. PC rebooted and worked well again, I continued playing this game for another 2 hours and went to sleep. Next evening I tried to play some BF3 multiplayer (use to play on LOW settings). Approx. 10 minutes into the game red/pink-ish artifacts appeared on the screen and game quit to desktop. Restarted the game and another 3-4 minutes afterwards another crash to desktop but this time followed shortly by BSOD Code 16. From that moment I started to seeing artifacts on random startups, including Windows loading screen and the BIOS itself. Windows would still load but soon enough it would BSOD on a simple task like opening a Internet browser. Today I get tons of artifacts (little small red dashes all over the screen) on BIOS, loading screen, normal Windows mode as well as safe mode. I suspect it wouldn't be drivers but I tried removing and sweeping them entirely in the safe mode. PC would still start with artifacts all over the place but would load the normal mode, just without the driver, in the default lowest resolution. As soon as proper Nvidia drivers are installed though and PC rebooted, Windows doesn't load at all as BSOD now appears on loading screen. However, again, if I go to safe mode and remove drivers, normal mode launches fine. So obviously crash happens only on high resolution. I opened my machine this morning and gave it a proper cleaning even though it wasn't heavily dusted. It didn't help and number of artifacts seems to increase with every PC restart. I write these words in safe mode, which works, but I have to look through all the red dots and dashes. I don't have built in GPU chipset so I can't try removing my Geforce card nor can I borrow A GPU from anyone else. What are my options? I was looking into getting a completely new rig around Christmas so I'm not freaking out about this. If everything points to hardware issue I may simply decide to get the new machine earlier and don't bother with fixing this one. However it would be great to learn more if this is indeed situation that has slim chances of getting sorted. I realize BSOD Code 16 is rather popular topic online but every story seems a bit different and there can be number of issues with it. Hence a new thread.

    Read the article

  • SYSTEM hive of the register is causing computer to BSOD on boot

    - by FernandoSBS
    After some work on my computer, perhaps some updates installs, it didn't boot anymore. BSOD on windows logo loading. After some research I've found out that if I replace the SYSTEM hive of the register with the last backup it boots ok, but of course goes back to an old stage of machine setup. So my question is: where does register stores hardware and/or updates/software that loads in the machine boot, so that I can check which program is producing that BSOD and disable it? System is Win 7 64 bits SP1

    Read the article

  • BSOD during Cygwin install

    - by Mike Pennington
    I have been running Cygwin (1.7.7) under Windows Vista 64-bit, SP2 for at least a year, and had no problems with my installation at all until today. When I tried to install apt-cyg, I realized that I needed to get the svn client. During the installation of the package dependencies, Vista threw a blue screen of death. I hoped this was a one-time occurrence, so I rebooted into Vista and tried to install svn again; same result. Next I completely removed Cygwin's directory, and all Cygwin registry entries; at this point, I tried reinstalling the base Cygwin system again. During the installation of bash, I got another BSOD: Apologies for the fuzzy pic, I had to shoot with my phone camera. I googled for BSOD and Cygwin and found a post by Dave Korn mentioning that the only reasons Cygwin should cause a BSOD is because of either ioperm.sys or some USB utilities. I have neither on my system. Every time I have tried reinstalling, Vista BSODs; I have not had problems installing any other software packages on this Vista machine. How can I get Cygwin installed again (without reinstalling Vista)?

    Read the article

  • Windows 7 BSOD on startup

    - by Cristy
    I got a BSOD today after getting home from 11 hours of work... It seems to work in SAFE MODE (sometimes, not always) The BSOD says: SYSTEM_SERVICE_EXCEPTION STOP: 0x0000003b WimFsf.sys - Address FFFFF88001A6B76B base at FFFFF88001A600000, DateStamp 4a5bc362. Sometimes it shows the welcome screen, shows the destkop for a few seconds and then BSODs Already did: unplugged all the USB devices reset the CMOS I haven't installed any new software recently. What should I do? EDIT: I've managed to get into safe mode and it seems to works fine. When I go into normal mode it shows the desktop then it freezes... Is it more likely to be a software or hardware problem? EDIT2: I've managed to get into normal mode by disabling all the non-microsoft services & startup programs. One more thing: When I shut down my PC, on the "Logging off" screen appear some artifacts. I don't think it's because of my graphics card cause I've opened Black OPS and it worked fine. It's so strange... It still BSODS on startup (but there a ~=10% that it will not), and when it doesn't BSOD's it works fine...

    Read the article

  • Windows 7 BSOD when I walk away from the computer

    - by bobobobo
    I have a really weird experience with this new AM3 box I set up. Everything seems fine at first. But now I get frequent (daily) BSOD's, mostly when I walk away from the computer for more than 5 minutes (when the computer is idle). The BSOD's as shown by BlueScreenView almost always have to do with ntoskrnl.exe, and they'll do with really normal sounding operations, like SYSTEM_SERVICE_EXCEPTION, NTFS_FILE_SYSTEM, DRIVER_IRQL_NOT_LESS_OR_EQUAL, KMODE_EXCEPTION_NOT_HANDLED, BAD_POOL_HEADER - You name it. These are basically them, and they repeat after that, just random order. Its not like one is more consistently the problem than the other. I have Windows update ON and I let it do its updates everytime it wants to. I turned windows indexing service off, but it seems Windows 7 does a lot of background processing when I'm away - I'll come into the room and the fan will be going nuts (I'm pretty sure this isn't because the computer flies into a panic whenever I leave). I tried finding updates for my ASUS, and really there isn't much to install (except some new driver firmware). I'm going to install that to see if it helps, but what else could it be? Is it possible its a hardware issue with the board? Or is every Windows 7 user experiencing daily BSOD these days that I don't know about?

    Read the article

  • Need help diagnosting a random BSOD

    - by diimdeep
    I have random BSOD even in idle .. Already tried: memtest - ok scandisk- ok netsh int ip reset Winsock fix. tcpip.sys+2c13e 21.06.2011 15:21:00 DRIVER_IRQL_NOT_LESS_OR_EQUAL tcpip.sys+2de08 22.06.2011 15:09:28 DRIVER_IRQL_NOT_LESS_OR_EQUAL tcpip.sys+2de08 22.06.2011 16:09:31 DRIVER_IRQL_NOT_LESS_OR_EQUAL tcpip.sys+2c13e 23.06.2011 9:48:16 DRIVER_IRQL_NOT_LESS_OR_EQUAL Fastfat.SYS+4dc 21.06.2011 11:55:10 SYSTEM_THREAD_EXCEPTION_NOT_HANDLED ipnat.sys ipnat.sys+6751 ntoskrnl.exe ntoskrnl.exe+699e0 tcpip.sys tcpip.sys+2c13e 0 HTTP.sys HTTP.sys+15d00 ipnat.sys ipnat.sys+6751 tcpip.sys tcpip.sys+2de08 ipnat.sys ipnat.sys+6751 ntoskrnl.exe ntoskrnl.exe+79d94 tcpip.sys tcpip.sys+2c13e Fastfat.SYS Fastfat.SYS+4dc ntkrnlpa.exe ntkrnlpa.exe+8d820 Here is .dmp files and report generated by BlueScreenView https://skydrive.live.com/redir.aspx?cid=7e5eafae5336f402&resid=7E5EAFAE5336F402!116 Please help !! I know this questions but answers in it not help Only browser causes BSOD -- all other TCP operations okay

    Read the article

  • BSOD in nltdi.sys Vista x64

    - by W1N9Zr0
    BSOD caused by NetLimiter's nltdi.sys Error codes vary, but this is pretty constant: SYMBOL_NAME: tdx!TdxSendConnection+2a0 MODULE_NAME: tdx IMAGE_NAME: tdx.sys Stack trace includes: nltdi+0x1144 example

    Read the article

  • Battery won't charge and BSOD: DRIVER_POWER_STATE_FAILURE

    - by JamesGecko
    I have a Dell Vostro 1510 running Windows 7. Today when I pulled my machine out of it's bag and plugged it in, the little battery light on the side blinked constantly instead of staying solid, and Windows showed a message that the battery was not charging. The battery is 3.5 years old, but it can still hold the machine in standby overnight, so I don't know why it won't charge anymore. After I have had the machine on for a while (20 minutes the first time, 40 minutes the second time), it shows a blue screen of death with the message DRIVER_POWER_STATE_FAILURE and reboots. I can deal with the battery being dead, but not with blue screens of death. Does anyone know how to fix it? Edit: Potentially relevant, this started happening after an OS update was automatically installed on Friday and Windows started nagging to reboot. The first BSOD was before the reboot; the update made a lot of registry changes when the machine came up, and the second BSOD was 40 minutes later.

    Read the article

  • BSOD During Windows 7 Install

    - by matheeeny
    I current have a working XP partition a Dell XPS m1330 laptop along with a working Ubuntu partition. After launching the Windows 7 install DVD from within XP I run through the options for a custom install on a free NTFS partition. Everything seemingly works as it should and then my computer restarts. After choosing to boot into the newly created Windows partition I am given the Windows 7 splash screen only to be followed by the BSOD. Here are the stop codes from the BSOD: stop: 0x0000007b (0x80D86B58,0xc0000034,0x00000000,0x0000000) Googling this tells me that it indicates an 'inaccessable boot drive'. Is it possible that its having problems booting from this partition due to the other existing partitions? I'm thinking that there may be a windows recovery CD workaround this but I am not quite proficient in its capabilities. This is what happens when I try to install by booting from the DVD

    Read the article

  • Windows 7 BSOD with Service Exception Error and Randomly Reboots

    - by Jason Shultz
    I've got a windows 7 laptop that BSOD with a Service Exception Error when I connect to a wireless network. It also does it when it's just sitting still doing nothing. I ran bluescreenview and here are the last four BSOD's from today: ================================================== Dump File : 051210-18642-01.dmp Crash Time : 5/12/2010 8:36:14 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06fda160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-18642-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-16551-01.dmp Crash Time : 5/12/2010 8:41:04 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06f40160 Parameter 4 : 00000000`00000000 Caused By Driver : ntoskrnl.exe Caused By Address : ntoskrnl.exe+70600 File Description : NT Kernel & System Product Name : Microsoft® Windows® Operating System Company : Microsoft Corporation File Version : 6.1.7600.16539 (win7_gdr.100226-1909) Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-16551-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-17269-01.dmp Crash Time : 5/12/2010 8:45:51 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`07db1160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-17269-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-19453-01.dmp Crash Time : 5/12/2010 5:46:25 PM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`02625160 Parameter 4 : 00000000`00000000 Caused By Driver : win32k.sys Caused By Address : win32k.sys+2d4201 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-19453-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ==================================================  

    Read the article

  • running chkdsk /F on a large mounted NTFS image file gets BSOD (Windows Vista)

    - by Citizentools
    Using ddrescue, I've created ISO files from the C: and D: drives on my Windows XP laptop's harddisk (after the laptop stopped booting and chkdsk etc. wouldn't fix it). I was able to mount the 60 GB D.iso file use OSFmount, and successfully recreated the D: drive on another laptop. The C.iso image is more problematic. ddrescue left about 3mb unrecovered of 85 GB total, after multiple passes (no big worries about this) and I'm able to mount it with OSFmount on a Windows Vista laptop. However, when I run chkdsk /F /V on the mounted drive (which was mounted as H:), I consistently get a blue screen (BSOD). CHKDSK makes it through the first three passes, including index fixing and security descriptor fixes, without errors, but triggers a BSOD when it attempts to fix the volume records or bitmap If I attempt to fix the drive by clicking on Properties-Tools-Error checking-Check Now-Automatically fix file system errors, I get an alert box reading "WIndows was unable to complete the disk check." I'd try a tool other than OSFMount, but it's the only thing I've found so far that will mount large ISO files, and it has worked for me up to now in this process. [Update 2011-11-13 18:41 EST] Just ran the same process using the original Windows XP laptop, with a different internal drive, and chkdsk worked like a champ. So the question is still interesting, but decidedly less urgent.

    Read the article

  • BSOD: 0x7F on XP

    - by MachinationX
    The machine in question is a Dell PP22L laptop. After logging on, the system will act normally, but slowly, for about 5 minutes before going to a BSOD with the following details: (shown by using BlueScreenView)

    Read the article

  • AMD Opteron BSOD - A clock interrupt was not received on a secondary processor within the allocatio

    - by laurens
    On one of our servers we got an -for me new- BSOD with the error message: "A clock interrupt was not received on a secondary processor within the allocation time interval" The server's specs: HP XW9400 2x Dual-Core AMD Opeteron 2224 SE 3,20Ghz (4CPUs) 16GB HP ECC RAM Windows 2008 R2 Enterprise 64bit Nvidia Quadro 4xxx graphics (?) Sounds familiar to someone ? Thanks in advance

    Read the article

  • Explaining odd sound effects during BSOD

    - by bizzz
    Hello, over the years of using Microsoft operating systems, I many times encountered the situation that I only now want to understand. When you get BSOD while listening to music, there is a short period of time (1-2 sec), when screen freezes and the last part of music is repeated several times, before everything falls into blue abyss. Today I became very curious about mechanics behind this situation - what makes that certain part of audio to loop? I beg you, kind sirs, to satisfy my curiosity.

    Read the article

  • Windows 7 BSOD at same occasions

    - by Tarnschaf
    Since I installed Win7 on my DELL Inspiron 1520 notebook, I frequently experience BSODs. I noticed that those nearly only happen on two occasions disconnecting a Bluetooth DUN connection selecting a file for upload in a browser (i.e. clicking on the button, shortly after the file dialog opened) The BSOD doesn't appear always on these actions. BluescreenView told me that most of the time it is srv2.sys+45883 or srv2.sys+42982 or ntoskrnl.exe+71f00 Now I read that srv2.sys is for NETBIOS sharing, which could be triggered when opening the file open dialog. All unused NICs are deactivated. Any ideas how to fix this?

    Read the article

  • BSOD error on Win7 ultimate

    - by jim
    BUG CHECK STRING = DRIVER_POWER_STATE_FAILURE BUG CHECK CODE = 0x0000009f PARAMETER 1 = 0x00000003 PARAMETER 2 = 0x85f05420 PARAMETER 3 = 0x82962ae0 PARAMETER 4 = 0x85aa2ab8 CAUSED BY DRIVER = ntkrnlpa.exe CAUSED BY ADDRESS = ntkrnlpa.exe+dcd10 FILE DESCRIPTION = NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) 32-bit C:\Windows\minidump\111109-22198-01.dmp This is the BSOD mini dump that I have been getting recently. I was wondering if anyone had any ideas what would cause this. I just did a clean install of win7 ultimate 32 bit. I don't do a lot with this pc. Mostly surf the web and that's when it happens. My only guess is that the power supply is failing and I need a new one. I wanted to check here and see if anyone else had some other idea before I bought a new one. Thank you for any help you can give me.

    Read the article

  • Installing Windows 7 on a BSOD Windows Vista (ASAP)

    - by anonymous
    On a previous question i posted, i asked for help on fixing my windows vista box because it keeps going to blue screen. No one seems to have the answer, so now i want to install Windows 7. I want to know if i can install 7 without having to reformat my hard drive and having to lose all my files. I've already confirmed the hardware is working because i installed Ubuntu 9.10 on my external hard drive and it runs on my system fine. I tested the memory using vista's memory test and Ubuntu's memory test. here's the previous post: http://superuser.com/questions/125897/i-really-need-help-resolving-a-window-vista-bsod-blue-screen-crash-on-my-deskto

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >