Search Results

Search found 27 results on 2 pages for 'desginer rams'.

Page 1/2 | 1 2  | Next Page >

  • PC with 2 RAMs of different frequencies (1GB 533MHz + 2GB 667MHz) showing only 2GB RAM

    - by srinivas
    I have 6 years old PC with 1.25GB (1GB + 256MB) of DDR2 533MHz RAM. As computer has become very slow and memory usage reaching its limits most of the times, i decided to upgrade RAM. But unfortunately, im not finding retailers selling DDR2 533Mhz RAM near my area. Since I was not sure mixing up RAMs of different frequencies, i searched in web. Most results said they can be mixed but computer would run at lower frequency of the 2 RAMs. So I bought 2GB DDR2 667Mhz RAM expecting my pc to have 3GB RAM running at 533 MHz. But computer properties page shows only 2GB RAM. BIOS settings too show the slot with 2GB 667MHz as ACTIVE and other slot with 1GB 533MHz as "NOT INSTALLED". When I removed 2GB RAM, they computer shows only 1GB RAM. So for some reason, 1GB RAM is not getting detected/used. What is the problem here? thanks in advance.

    Read the article

  • Access Virtual PC Website from Host Browser

    - by rams
    I have Virtual PC 2007 running Windows XP. I can access a website setup on the Virtual machine from a browser in the Virtual machine. How do I setup the virtual machine so I can access the website from a browser on the host machine. The host machine is also running WinXP. Both host and virtual machine can ping each other via IP and computer name. TIA rams

    Read the article

  • Silverlight 4 application on localhost runs extremely slow

    - by rams
    Silverlight 4 app running in IE8 and hosted on VS2010 internal webserver. The website takes atleast a minute to download the xap and code runs slow on client (IE8). I am running the app in debug mode and have turned intellitrace off. Symbol loading is also turned off. However if I kill the VS webserver, clean the solution, the app runs fast. 3 debugging sessions later, the app slows to a crawl. Have also tried turning off McAfee live scanning but no use. Looked in event log for any clue but found none. What could be the cause of the slowness? TIA rams

    Read the article

  • Upgrading MacBookPro

    - by moray95
    I'm using a Late 2011 13" MacBook Pro with an Intel i5 @ 2.4 GHz and 4 GB 1333 MHz ram. The computer has started to get older. I was going to upgrade the ram but since Mavericks come out, the ram problem just went away and now, it started to get slower and slower. So I was thinking of upgrading my ram to at least 8GB and my CPU. I have two question about that. As I have 1333Mhz rams installed by default, the motherboard should not support 1666Mhz rams. But can I use 1666 Mhz ones and if I can will it make any difference? Also is it possible to upgrade the CPU of my computer? If yes how can I find a CPU compatible with the other components?

    Read the article

  • problem with the connectivity/updation using db2(universal driver)

    - by rams
    I choosed a web project in order to do that i am using an IDE (Eclipse), database (DB2 universal driver) and Apache Tomcat server. So, by gods grace every thing has gone well but when I try to update data to DB2 database through JDBC code then I am getting an SQL DB error as :: DB2 SQL error: SQLCODE: -204, SQLSTATE: 42704, SQLERRMC: DB2ADMIN.REGISTER where register is my table name and even i logged in as db2admin but i think there is no connectivity established but still its not resolved

    Read the article

  • Data view web part throwing error

    - by Ashutosh Singh
    Hi I'm using a xslt based dataview webpart the steps i have taken to create a data view webpart is that 1. added a list view webpart on the page 2. Modified the toolbar property to show fulll toolbar 3. open the web page containing above list view webpart in sharepoint desginer and converted it to xslt based webpart (to make further changes in UI) 4. saved the page and previewed in browser in browser web part was throwing the error while i was able to see it properly in desginer witout any error the error maesseged shown in webpart was: ** Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Windows SharePoint Services-compatible HTML editor such as Microsoft Office SharePoint Designer. If the problem persists, contact your Web server administrator. ** the error message provided in sharepoint log file was : 05/12/2010 17:56:29.54 w3wp.exe (0x19FC) 0x1E9C Windows SharePoint Services Web Parts 89a1 Monitorable Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ResolveParameterValuesToXsl(ArgumentClassWrapper argList) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform() 05/12/2010 17:56:29.62 w3wp.exe (0x19FC) 0x1E9C Windows SharePoint Services Web Controls 88wy Medium SPDataSourceView.ExecuteSelect() - selectArguments: IsEmpty=True, MaximumRows=0, RetrieveTotalRowCount=False, SortExpression=, StartRowIndex=0, TotalRowCount=-1 05/12/2010 17:56:29.62 w3wp.exe (0x19FC) 0x1E9C Windows SharePoint Services Web Controls 88x2 Medium SPDataSourceView.ExecuteSelect() - formattedQuery = 1 05/12/2010 17:56:29.64 w3wp.exe (0x19FC) 0x1E9C Windows SharePoint Services Web Parts 89a1 Monitorable Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ResolveParameterValuesToXsl(ArgumentClassWrapper argList) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform()

    Read the article

  • Which server to choose? [closed]

    - by Devbag
    I have telecom applications that I want to run on a server(I have chosen HP server), there are so many types of hp servers i.e DL380 (g3,g4 ....), blade , entry level server. I've surfed the web and nothing is helping me choose one that suites me, what I have is telecom application made in PHP and C. I've found many used DL380 G3,G4 and G5 on craiglist with really good prices, some of them have misssing HD, RAMs and some of them have nothing missing. Can you please help me choose wisely. Thanks,

    Read the article

  • HP Pavilion dv6 can't shutdown or reboot

    - by Hamza
    Ubuntu 11.04 with HP Pavilion can't shutdown or reboot. I am old linux user, been using linux for years, this is the first time in encounter this issue ever with many Linux distros on the same machine. I tried many distro but mainly Ubuntu ( 10.04 , 10.10 , 10.04 ) , the system can't reboot or shutdown with. Other than that everything works fine. Same issue happened with Linux Mint .... Well I have seen many questions with the same problem and no real answers yet, or accurate replies from Ubuntu or even HP. My Machine is : HP Pavilion dv6 , Core i7 Processor , 4 GB Rams , ATI Radeon .... etc.

    Read the article

  • after i typed in my username then it just quit the window and do nothing

    - by Bosco S. Chan
    I have a vaio VGN-FJ270P/B laptop which originally installed a windows xp professional in it. Last week, i had enough about the speed of windows and bought a brand new fresh SSD [M5S 128GB] and 2 new RAMS [1GB x2]. And i used my desktop to install a LiveUSB and downloaded the latest ubuntu and installed it [Universal USB Installer + Ubuntu 12.04.1]. All seems find through partition and typing my username and password. just after i typed in my password, i pressed continue and then it pop-up the window about choosing the profile picture for my account and it immediately disappear and went doing nothing. What's happening with it? any help would be appreciate...! Thanks!! Bosco

    Read the article

  • Faulty memtest result

    - by dhojgaard
    I've been a bit suspicious about my RAM lately. They seem not work like i expect them to. For instance i run a lot of Virtual Test Environments in VMware Workstation and lately Ubuntu starts to lag just running 4 virtual machines each dedicated 512 MB. BTW im having 6GB memory on my laptop. This did not use to be a problem for me on my last laptop that even had a lot lower CPU resources. So i was led to try a memtest after reading some websites about RAM testing. So i did a memtest overnight but when i woke up this morning i was just looping and i could not Exit or do anything. It was just looping the number of errors besides test 7 which you can see in the lower right part of the screenshot. Can anyone interpret this screenshot for me? Do i have a faulty set of RAMs?

    Read the article

  • Win 7 BSOD stucks at dumping

    - by AFO
    Recently Ive been getting frequent bsods, which always gets stuck at dumping without finishing it, with most of them showing no error messages. This never happened before i upgraded to new rams, but 2 passes of memtest86 turned out fine. Tried reinstalling windows, problem still there. Tried initiating a manual crash, and that did create a successful dump. The SSD win 7 is on doesn't seem to have any problems, crystaldisk says its healthy. Varied the cpu multiplier between stock and +500Mhz, crashed regardless. Left voltage control to auto. Im fairly sure its a hardware problem, just cant pinpoint which specific part(s). The specs- Windows 7 x64 (1 day old) 955 x4 BE c3 (running at stock) (3.5 years old) GA-970A-D3 (1.5 years old) Gigabyte 6950, unlocked to 6970 (still at 6950 speeds) (<3 years old) 2x4GB 1600 CL9 HyperX Blu (running at 11-11-11, default motherboard setting) (<1 month old) Plextor M5s (around 5 months)

    Read the article

  • Will this increase my VPS failing rate ?

    - by Spencer Lim
    Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange install Team foundation server on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler for this about one VPS can only install what what what service ? Thx for reply

    Read the article

  • How to uninstall Ubuntu 12.04 LTS dual booting with Windows 7?

    - by user103799
    I need to uninstall Ubuntu 12.04 LTS from my laptop. It's currently dual booting with windows 7. I've searched and found some ways to do this, but all use some kind of a CD to complete the deletion. I have neither the Ubuntu Live CD nor Windows Install CD/Recovery CD. This laptop did not come with one, and I unfortunately have no available storage device to make a recovery CD. Is there a way to completely uninstall Ubuntu 12.04 LTS dual booting without using any hardware? If there's no way, then how to uninstall using the least hardware possible? Or easy to find hardware? I've nothing against Ubuntu. I installed this as a backup/alternative to error-prone Windows 7. However, after a hardware upgrade, including extra RAMs and a new, better CPU, Windows 7 runs smoothly again. Now I'm running low on hard drive space and need the 40 gig or so of space I partitioned for Ubuntu back. Any help is appreciated, and thanks in advance!

    Read the article

  • Ram not working in dual dynamic paging mode

    - by Robin Agrahari
    My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

    Read the article

  • Java RegEx API "Look-behind group does not have an obvious maximum length near index ..."

    - by Foo Inc
    Hello, I'm on to some SQL where clause parsing and designed a working RegEx to find a column outside string literals using "Rad Software Regular Expression Desginer" which is using the .NET API. To make sure the designed RegEx works with Java too, I tested it by using the API of course (1.5 and 1.6). But guess what, it won't work. I got the message "Look-behind group does not have an obvious maximum length near index 28". The string that I'm trying to get parsed is Column_1='test''the''stuff''all''day''long' AND Column_2='000' AND TheVeryColumnIWantToFind = 'Column_1=''test''''the''''stuff''''all''''day''''long'' AND Column_2=''000'' AND TheVeryColumnIWantToFind = '' TheVeryColumnIWantToFind = '' AND (Column_3 is null or Column_3 = ''Not interesting'') AND ''1'' = ''1''' AND (Column_3 is null or Column_3 = 'Still not interesting') AND '1' = '1' As you may have guessed, I tried to create some kind of worst case to ensure the RegEx won't fail on more complicated SQL where clauses. The RegEx itself looks like this (?i:(?<!=\s*'(?:[^']|(?:''))*)((?<=\s*)TheVeryColumnIWantToFind(?=(?:\s+|=)))) I'm not sure if there is a more elegant RegEx (there'll most likely be one), but that's not important right now as it does the trick. To explain the RegEx in a few words: If it finds the column I'm after, it does a negative look-behind to figure out if the column name is used in a string literal. If so, it won't match. If not, it'll match. Back to the question. As I mentioned before, it won't work with Java. What will work and result in what I want? I found out, that Java does not seem to support unlimited look-behinds but still I couldn't get it to work. Isn't it right that a look-behind is always putting a limit up on itself from the search offset to the current search position? So it would result in something like "position - offset"?

    Read the article

  • Asus P5Q doesn't post at all

    - by Sebi
    I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

    Read the article

  • Will this increase my Virtual private Server failing rate ?

    - by Spencer Lim
    Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange << should live inside MWS2008 ? or standalone without OS? install Team foundation server << should live inside MWS2008 ? or standalone without OS? on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler to measure for this about one VPS can only install what what what service ? because of my resource is limited =.@ may i know if it is install in this way,maybe it seem like defeat the way of "VPS"... what will happen ? or any guideline on this issue (fully configuring the window server 2008 R2) ? Thx for reply

    Read the article

  • Hardware issue: computer plays beep sounds at startup, and then turns off

    - by Darkkurama
    Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

    Read the article

  • Windows 7 BSOD on boot after windows update

    - by Razor Storm
    After Windows updates today, I restarted my desktop (for the first time in a couple weeks), and on boot up ran into a BSOD: STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF8000355AB5A, 0xFFFFF880031CB3A8, 0xFFFFF880031CAC10) I tried system restore, but there was only 1 restore point which was from all the way back in January. I tried it anyway but after 10 minutes of running it said system restore could not be completed. Additional info: I checked my BIOS and it is detecting my rams. CPU is Intel Sandy Bridge i5-2500k overclocked to 4.3GHz. I reclocked it back to stock speeds (3.3 GHz) in case it was causing the issue (I highly doubt that it is). But the problem persists. Running Windows 7. 12 GB of RAM at 1333 MHz OS on 64gb SSD. What is causing this? How should I fix it? Also, if it is caused by windows update, is there a way to undo the update with command prompt? I tried safemode, and the blue screen comes up as well, but I am able to access command prompt.

    Read the article

  • Getting a gestureoverlayview

    - by Codejoy
    I have been using some nice tutorials on drawing graphics on my android. I wanted to also add in the cool gesture demo found here: http://developer.android.com/resources/articles/gestures.html That takes these lines of code: GestureOverlayView gestures = (GestureOverlayView) findViewById(R.id.gestures); gestures.addOnGesturePerformedListener(this); This is fine and dandy yet I realize in my demo i'm trying to build using code from "Playing with Graphics in Android". The demos make sense, everything makes sense but I found out by using: setContentView(new Panel(this)); as is required by the Playing With Graphics tutorials, then the findViewById seems to no longer be valid and returns null. At first I was about to post a stupider question as to why this is happening, a quick test of playing with the setContentView made me realize the cause of findViewById returning null, I just do not know how to remedy this issue. Whats the key I am missing here? I realize that the new Panel is doinking some reference up but I am not sure how to make the connection here. The: R.id.gestures is defined right int he main.xml as: (just like the tutorial) <android.gesture.GestureOverlayView android:id="@+id/gestures" android:layout_width="fill_parent" android:layout_height="0dip" android:layout_weight="1.0" /> So I did confirm the setContentView(new Panel(this)) is causing the issue. So I know the issue is that I have to figure out how to add the android.gesture.GestureOverlayView to the panel class somehow, I am just not sure how to go about this. After fighting with this I generally know what I need to do just now how to do it. I think I need either the equivalent of creating a panel in that main.xml OR figuring out how to build whats in main.xml for the gestures in code. I am close because I did this: GestureOverlayView gestures = new GestureOverlayView(this); which gets me a non null gestures now, unfortunately since I am not telling it to fill Parent anywhere I don't think its really showing up, so I am trying hard to figure out layout pa rams. Am I even on the right track?

    Read the article

  • Cannot run a VM with more than three network interfaces with KVM

    - by Bostonvaulter
    I'm running KVM on top of Ubuntu 10.10 Server I can create VM's (Virtual Machine) and network interfaces fine but I cannot seem to add more than three network interfaces. As soon as I have a VM with four network interfaces it gets stuck on startup at the starting SeaBIOS page with this message: Starting SeaBIOS (version pre-0.6.1-20100702_143500-palmer) So far I've verified this with two VM's, a Ubuntu 10.10 desktop and a Vyatta router. The specific network hardware I assign to the VM's doesn't seem to matter. I'm trying to have one bridged interface and three private networks using Vyatta to route between them. Does anyone know why I can't run a VM with more than three network interfaces? Edit: Additionally the KVM thread responsible for the specific VM hangs using ~100% CPU (i.e. one core). Here's the command for the process that is hanging: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name vyatta -uuid 6dff7c94-6810-423e-5fea-fec10da0e9b7 -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/vyatta.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive file=/home/rams/virtual-machines/vyatta.img,if=none,id=drive-ide0-0-0,boot=on,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device rtl8139,vlan=0,id=net0,mac=00:54:00:be:cc:4b,bus=pci.0,addr=0x3 -net tap,fd=97,vlan=0,name=hostnet0 -device rtl8139,vlan=1,id=net1,mac=52:54:00:da:59:ed,bus=pci.0,addr=0x5 -net tap,fd=98,vlan=1,name=hostnet1 -device rtl8139,vlan=2,id=net2,mac=52:54:00:ce:22:b6,bus=pci.0,addr=0x6 -net tap,fd=99,vlan=2,name=hostnet2 -device rtl8139,vlan=3,id=net3,mac=52:54:00:1e:bc:46,bus=pci.0,addr=0x7 -net tap,fd=101,vlan=3,name=hostnet3 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Edit: I've also found an error in dmesg that might be related (it also shows up when running virtd in verbose mode): 14:47:24.399: warning : qemudParsePCIDeviceStrs:1422 : Unexpected exit status '1', qemu probably failed I've also tried disabling app armor but that doesn't seem to make a difference.

    Read the article

  • BSOD & System Failure after trying to install a new RAM

    - by Praveen Kumar
    I have updated the question with sections, so that people won't find it difficult to read. Basic System Information Let me give a basic introduction on my system. I have a system of following configuration: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz RAM: Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9) x 2 OS: Windows 7 Ultimate, SP1 Build 7601 HDD: 1 TB Seagate 7200 RPM The Problem It was working fine for about an year. Yesterday I planned to increase my RAM to 16 GB by putting another set of two Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9). I got it from an authorized reseller and also, the RAM was fitted by a service engineer only. After the RAM was fit (all the four), the system failed to start, with an error code of 0x000000f4. The complete information of it is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: f4 BCP1: 0000000000000003 BCP2: FFFFFA8008A39060 BCP3: FFFFFA8008A39340 BCP4: FFFFF800037C8510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\093012-13041-01.dmp C:\Users\Praveen Kumar\AppData\Local\Temp\WER-30716-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Another Problem We first thought that it was the RAM, which caused the issue. So I returned the RAMs and now my computer configuration is exactly how it was the previous day. But, following the removal of the RAM, I also had several crashes after that. One suspicious thing was with an error code c0000134: STOP: c0000135 The program can’t start because %hs is missing from your computer . Try resintalling the program to fix this problem. After reading contents from this, this and this, which were never my case, they didn't help me. But I didn't receive any more STOP c0000134 messages. But this 0x000000f4 keeps on coming. I am writing from the same system and it allows me to work for say, half an hour max. Then I hear a device disconnect sound, the one you hear in Windows 7, when a USB Mass Storage Device is plugged out. Immediately following that, my screen goes blank and I get 0x000000f4 blue screen. Okay, now I am really concerned about my Hard Disk data, but I have no clue if there is a problem with the HDD. My Question What all files do I need to submit for your reference? Can this issue be fixed? I am getting more time if I remove my RAM, clean it and then put it back. Weird! Hope I have given the necessary information to help you guys. Thanks in advance. Minidumps I have uploaded all the Minidump DMP files from C:\Windows\Minidump folder here: http://www.praveen-kumar.com/Minidumps.zip Let me know if you face any issues in accessing it. Will be able to share elsewhere. Updates 30-Sep-2012 10:15 AM IST: When I keep the system cover opened, pressed the HDD Cable well, it is allowing me to be on for about half an hour, I guess? Also, I feel that the CPU fan speed is kind of slow. It rotates at around 900 RPM, but the CPU Temperature is not more than 70° C. 30-Sep-2012 10:30 AM IST: My Modem (Beetel 220BX ADSL2+ Router) failed. I have no idea how it is related to this issue, but I thought that I need to document this too. I really have a bad day here. 30-Sep-2012 11:00 AM IST: System still running fine, with the cabinet cover open, now for about an hour. 30-Sep-2012 12:00 PM IST: I shut down the system and closed the cabinet. Started the system, and it hung after giving the password. After a few minutes, got the same 0x000000f4 error. So, while it is in the upright position, fixed the Hard Disk cable and now it is booting fine. Waiting for more observations and answers.

    Read the article

1 2  | Next Page >