Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 1/215 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• mythbuntu 12 - lirc device doesn't appear to even exist

  - by FrustratedWithFormsDesigner

  I'm trying to get a new installation of Mythbuntu working. So far, everything is OK except the remote. The sensor for the remote is on my Hauppauge WinTV HVR 1250. First I tried to run irw to see what was being picked up by the sensor: $ irw connect: No such file or directory Then trying to run lircd gives: $ lircd start$ lircd start lircd: can't open or create /var/run/lirc/lircd.pid I look for any lirc devices and find there are none: $ ls /dev/li* ls: cannot access /dev/li*: No such file or directory Just to be sure, I check in /proc/bus/input/devices, which shows me two powerbuttons (not sure why), kbd and mouse dev, and the audio devs. Nothing for the IR receiver on the tuner card (which I thought was strange because shouldn't the tuner show up here?). $ cat /proc/bus/input/devices I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 U: Uniq= H: Handlers=kbd event1 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input0 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input2 U: Uniq= H: Handlers=sysrq kbd event2 B: PROP=0 B: EV=120013 B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe B: MSC=10 B: LED=7 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input1 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/input/input3 U: Uniq= H: Handlers=kbd mouse0 event3 B: PROP=0 B: EV=1f B: KEY=4837fff072ff32d bf54444600000000 70001 20c100b17c000 267bfad9415fed 9e168000004400 10000002 B: REL=143 B: ABS=100000000 B: MSC=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input4 U: Uniq= H: Handlers=event4 B: PROP=0 B: EV=21 B: SW=2000 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input5 U: Uniq= H: Handlers=event5 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Rear Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input6 U: Uniq= H: Handlers=event6 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input7 U: Uniq= H: Handlers=event7 B: PROP=0 B: EV=21 B: SW=4 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line-Out" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input8 U: Uniq= H: Handlers=event8 B: PROP=0 B: EV=21 B: SW=40 According to dmesg, the driver was registered, but it doesn't look like any devices was associated with the driver: $ dmesg | grep irc [ 10.631162] lirc_dev: IR Remote Control driver registered, major 249 So far, I've seen a number of forum pages suggesting that I use some trick to create a link between /dev/lirc and some other device that is the REAL IR sensor, like /dev/event5, but those cases assume that the real device is shown from /proc/bus/input/devices, and I don't see any such device there. Any suggestions on how to fix or further diagnose this?

  Read the article

• Webinar, June 27: Application Intelligence and Connected Devices

  - by terrencebarr

  Oracle and Beecham have recently conducted a market survey on use of Connected Devices for M2M & Internet of Things (IoT) applications and new trends. On June 27, 9 am ET the first session in this webinar series addresses intelligence in connected devices. Join Peter Utzschneider from Oracle and Robin Duke-Woolley of Beecham Research as they discuss the findings from this survey and the implications for the M2M & IoT connected devices market: What are the key business drivers of your connected devices program? To what extent do you expect the intelligence required for M2M & IoT applications to change? Would these changes occur at the network edge, at the data center, or both? What are the impacts of these changes on ISV’s and device manufacturers? What are the opportunities for other M2M & IoT players? To attend, please register for free or click on the image. Cheers, – Terrence Filed under: Embedded Tagged: Connected, devices, iot, Java Embedded, Java ME Embedded, M2M, webinar

  Read the article

• lsusb - where device description comes from

  - by tommyk

  For one of my attached USB devices (2773:0104) I see no description in lsusb command output: user@Thinkpad-Laptop:~/binaries$ lsusb Bus 008 Device 002: ID 0a5c:217f Broadcom Corp. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 036: ID 2773:0104 Where USB description is comming from, is it from device driver or is it stored in the hardware itself ?

  Read the article

• Can two Identical devices be present on the same bus in any PCI Topology

  - by vaibbhav

  As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. How will the PCI Software Subsystem distinguish between the two? If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

  Read the article

• How to connect devices behind Comcast router/modem with devices behind wireless router

  - by deeperDATA

  I know this is going to seem like a simple solution but I have been unable to find a clear answer through Google. Simple office setup: I have a Comcast modem/router that has 4 hard wired ports. In one of those ports I have a Cisco wireless router which also has 4 of its own ports. What is the method for getting devices behind the modem/router to ping/communicate with devices behind the wireless router? They are all on the same subnet but the IP ranges differ. The router produces 192.168.1.1 by default while the Comcast modem/router produces 10.1.10.1 by default. I think what I'm attempting to do might be considered "extending" the modem/router's network but I'm not sure. Thank you in advance for your assistance.

  Read the article

• unable to access usb device.

  - by Tom

  Hi everyone, I'm reading my boot logs, at /var/log trying to understand why the boot process is taking so long. I found that the system can't access many usb devices, but can't understand why. Is there a way to stop Ubuntu from trying to access them? Here are the lines: /var/log# grep -r "usb_id" . ./boot.log:usb_id[716]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/mouse1' ./boot.log:usb_id[721]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./boot.log:usb_id[725]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' Any help will be greatly appreciated. Thanks in advance.

  Read the article

• Sending computer audio output to multiple devices

  - by barfoon

  I'm looking to take an audio signal from a computer (1/8"), or multiple computers if possible, and send its output to some sort of switch/audio box that would allow me to choose between different receiving devices - say between headphones and a receiver. I don't want to split the signal, and I don't want to send the signal to both at once, I want to be able to choose where the signal goes. Is there a box that will do this?

  Read the article

• Wireless Connection unstable when multiple devices connected

  - by KingIsulgard

  My wireless network works perfectly when only 1 device is connected. Super fast, full strength. But as soon as multiple devices are connected to the wireless network the connections become unstable (constantly losing connection). It's quite annoying. I have a Sitecom Wireless 300N XR Gigabit Router WL-306, which should be a decent router so I'm guessing there must be something wrong with my configuration. Does any of you know what might cause this? Thanks

  Read the article

• List all devices of system

  - by pareshverma91

  In my understanding linux can list only those devices which it can understand, i.e. for which the drivers have been installed. I think lspci is the command for that. But how can one figure out if there exists some device in the system for which the drivers are not installed and perhaps some hint about what that device is for and what driver would suffice for it. I would like to know this info so as to be able to recompile my linux kernel to a minimum and would like to avoid a hit and trial approach.

  Read the article

• Wireless Connection unstable with multiple devices connected

  - by KingIsulgard

  My wireless network works perfectly when only 1 device is connected. Super fast, full strength. But as soon as multiple devices are connected to the wireless network the connections become unstable (constantly losing connection with the internet, not the network itself). It's quite annoying. I have a Sitecom Wireless 300N XR Gigabit Router WL-306, which should be a decent router so I'm guessing there must be something wrong with my configuration. Does any of you know what might cause this? Thanks

  Read the article

• Can't ping devices by IP address for devices allocated IPs by DHCP

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The Domain Controller/DNS server is a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. The network has been set up for a couple of years and usually works fine. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. The router UI shows that the laptop has a reserved IP allocated via DHCP. All machines either have a static or DHCP allocated IP on the 192.168.0.* subnet. Router - 192.168.0.1 - Static - Wired Windows Domain Controller - 192.168.0.8 - Static - Virtual Windows 7 Workstation - 192.168.0.200 - DHCP Auto - Wired VMWare ESXi Host - 192.168.0.201 - Static? - Wired iPhone 1 - 192.168.0.202 - DHCP Auto - WiFi iPhone 2 - 192.168.0.203 - DHCP Auto - WiFi Windows Vista Laptop - 192.168.0.204 - DHCP Reserved - WiFi Using the Windows 7 machine (200), I try to ping each machine and the only DHCP machine that responds is itself. The other DHCP machines fail with Reply from 192.168.0.200: Destination host unreachable.. Using nslookup fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the Windows 2000 Domain Controller (8), I try to ping each machine and the only DHCP machine that responds is the Windows 7 machine (200). Pinging the other DHCP machines fails with Request timed out.. Using nslookup also fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the iPhone 2 (203), I try to ping (Network Ping Lite) the machines with static IP addresses and that works fine. When I try to ping the Windows 7 machine (200) it is unable to get a response. How do I configure the DNS server/Windows Domain/Router properly so that the Windows Domain machines can see the IPs allocated via DHCP?

  Read the article

• Devices on one switch can't see devices on another switch

  - by jockey69

  I have RoadRunner Internet cable service hooked to a Motorola Surfboard modem. This is connected to a 10/100 wireless router (located in the garage). Downstairs, I have a ZyXEL GS-108b gigabit switch connected to one port on the router. From this switch I ran connections to a PS3, DVR, Vonage box and a wireless router (Buffalo AirStation 10/100). The Buffalo AirStation works as a wireless AP for other laptops, iPads and cell phones. Upstairs, I have an Asus gigabit switch connected to a gaming desktop, printer, and a media server on FreeNAS (PS3 Media Server on FreeNAS). The router is configured to assign static IPs to both the PS3 and the media server. Problem - I connect a laptop to the switch downstairs after disabling the wireless, thus making sure that I am accessing internet through the wired connection (and the router in the garage). All my computers, iPads and cell phones are able to connect to the internet without a problem. My PS3 connects to the interent with a wired connection but is unable to access the media server (I get a message that no media server is found). I used a wired laptop downstairs (connected to switch downstairs) but am unable to ping either the PS3 or media server! I may be doing something silly but am at my wits' end. Please help!

  Read the article

• in ubuntu 12.04 how may i know if my devices have it's driver installed??

  - by Aldo

  i have a dell N4110 laptop, and i want to know if the driver is installed and working well, something like the device manager in windows , or another way to know if a device is driverless or if the device might have a better driver, like my mousepad, in windows it have multi-touch gestures , that scrolls or zoom with two fingers (like an ipod) but in ubuntu it just works the right part as a scroll bar, so maybe it is installed one driver, but i need other one that uses well my devices. and the grphics card, i have not idea if it is well installed or isn't. i have a Intel 3000hd graphics card. thank you for your time. have a nice day people! =D

  Read the article

• How to get only USB devices not all the devices in the system

  - by new

  Grretings to all, I get devices list from the system. but i am not sure that if i want to get only the usb devices currently in the system means , What class i must specify in the below code ( DWORD Flags ) hDevInfo = SetupDiGetClassDevs(&GUID_DEVINTERFACE_USB_DEVICE, 0, // Enumerator 0, DIGCF_PRESENT | DIGCF_INTERFACEDEVICE );

  Read the article

• Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe driver tg3 will not install?

  - by Pete

  aries@aries-laptop:~$ sudo ifconfig eth0 up eth0: ERROR while getting interface flags: No such device aries@aries-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9641] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:170b] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7800] (rev 40) 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:16.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:16.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10) 01:00.1 SD Host controller [0805]: Broadcom Corporation Device [14e4:16bc] (rev 10) 01:00.2 System peripheral [0880]: Broadcom Corporation Device [14e4:16be] (rev 10) 01:00.3 System peripheral [0880]: Broadcom Corporation Device [14e4:16bf] (rev 10) 02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4358]

  Read the article

• wireless LAN soft blocked on Ubuntu 13.10

  - by iacopo

  I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

  Read the article

• MacOS Virtual Input Devices

  - by computergeek6

  How can I create a virtual HID device in code? I'm trying to avoid writing a kernel extension to accomplish this, but it seems to be the only way. I need to be able to create virtual HID devices of all types, and have an app running in the background feed them events. Is there a way to do this in user-space, or must I venture into kernel land?

  Read the article

• java bluetooth list of remote devices

  - by budzor

  i search all over the web and i cannot find anwser for my simple question: how to display in j2me list of all bluetooth devices in neighbourhood?

  Read the article

• Raid 5 mdadm Problem - Help Please

  - by user66260

  My Raid 5 array (4 1tb Disks WD10EARS) had was showing as degraded. I looked and one of the disks wasnt installed, so i re-added it with the mdadm add command. the array is now showing as (null)Array , but cant be mounted if i run: root@warren-P5K-E:/home/warren# sudo mdadm --misc --detail /dev/md0 I get: mdadm: cannot open /dev/md0: No such file or directory and running: root@warren-P5K-E:/home/warren# cat /proc/mdstat gives me: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] unused devices: < none > The data is very important root@warren-P5K-E:/home/warren# mdadm --examine /dev/sda /dev/sda: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b792 - correct Events : 1 Number Major Minor RaidDevice State this 1 8 0 1 spare /dev/sda 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# mdadm --examine /dev/sdb /dev/sdb: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7a0 - correct Events : 1 Number Major Minor RaidDevice State this 0 8 16 0 spare /dev/sdb 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# oot@warren-P5K-E:/home/warren# mdadm --examine /dev/sdc /dev/sdc: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7b4 - correct Events : 1 Number Major Minor RaidDevice State this 2 8 32 2 spare /dev/sdc 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd root@warren-P5K-E:/home/warren# mdadm --examine /dev/sdd /dev/sdd: Magic : a92b4efc Version : 0.90.00 UUID : 00000000:00000000:00000000:00000000 Creation Time : Sat May 26 12:08:14 2012 Raid Level : -unknown- Raid Devices : 0 Total Devices : 4 Preferred Minor : 0 Update Time : Sat May 26 12:08:40 2012 State : active Active Devices : 0 Working Devices : 4 Failed Devices : 0 Spare Devices : 4 Checksum : 82d5b7c6 - correct Events : 1 Number Major Minor RaidDevice State this 3 8 48 3 spare /dev/sdd 0 0 8 16 0 spare /dev/sdb 1 1 8 0 1 spare /dev/sda 2 2 8 32 2 spare /dev/sdc 3 3 8 48 3 spare /dev/sdd That on the 4 drives.

  Read the article

• Game testing on Android - emulator or real devices?

  - by n00bfuscator

  I am working at a localization agency and we have been approached by a client about testing their games on iOS as well as Android. Testing on iOS seems fairly easy as we can just buy a couple of devices and we should be covered. For Android it seems to be completely different. From what i found, the emulator can cover all API levels, screen sizes and such, but i hear it's buggy and nothing could replace testing on real devices. With the vast amount of Android devices out there and the rate at which new devices are released it seems impossible to keep up. How can i test games (localization and functional) on Android covering all compatible devices?

  Read the article

• Network and Storage Devices Throughput Chart

  - by zroiy

  With all of the different storage and network devices that surround our day to day life, understanding these devices data transfer speeds can be somewhat confusing. Think about trying to identify your weakest link in the a chain that starts with an external USB hard drive (or a flash drive) that's connected to a 802.11g wifi router, can you quickly come up with an answer of where's the bottle neck in that chain , is it the router or the storage devices ? . Well, the following chart should give you an idea understanding different devices, protocols and interfaces maximum throughput speeds. Though these numbers can fluctuate (mostly for worse, but sometimes for the better) due to different kind of factors such as OS overhead (or caching and optimization) , multiple users or processes and so on , the chart can still serve to provide basic information on the theoretical throughput different devices and protocols can get to.. Enjoy.  Link to the full size chart   References:http://en.wikipedia.org/wiki/Sata#SATA_revision_1.0_.28SATA_1.5_Gbit.2Fs.29http://en.wikipedia.org/wiki/Usbhttp://en.wikipedia.org/wiki/Usb_3http://en.wikipedia.org/wiki/802.11http://mashable.com/2011/09/21/fastest-download-speeds-infographic/http://en.wikipedia.org/wiki/Thunderbolt_(interface)http://www.computerworld.com/s/article/9220434/Thunderbolt_vs._SuperSpeed_USB_3.0  Icons:http://openiconlibrary.sourceforge.net/gallery2/?./Icons/devices/drive-harddisk-3.png      

  Read the article

• 50 Billion Served: Java Embedded on Devices

  - by Tori Wieldt

  It doesn't matter if it is 50 billion or 24 billion, just suffice it to stay that there will be MANY connected devices in the year 2020. With just 24 billion devices, they will outnumber humans six to one! So as a developer, you don't want to ignore this opportunity. What if you could use your Java skills and deploy an app to a fraction of these devices (don't be greedy, how about just, say, 118,000 of them)? Fareed Suliman, Java ME Product Manager had lots of good news for Java Developers in his presentation Modernizing the Explosion of Advanced Microcontrollers with Embedded Java at ARM TechCon in Santa Clara, CA last week. "A radical architecture shift is underway in this space, from proprietary to standards-based," he explained.  He pointed out several advantages to using Embedded Java for devices: Java is a proven and open standard. Java provides connectivity, encryption, location, and web services APIs. You don't have to focus on and keep reinventing the plumbing below the JVM. Abstracting the software from the hardware allows you to repeat your app across many devices. Abstracting the software from the hardware allows allows parallel development so you can get your app done more quickly. You already know Java (or you can hire lots of Java talent). Java is a full ecosystem, with Java Embedded plugins for IDEs like Eclipse and NetBeans. Java ME allows for in-field software upgrades. Suliman mentioned two ways developers can start using Java Embedded today:  Java ME Embedded Suite 7.0 Oracle Java Embedded Suite is a new packaged solution from Oracle (including Java DB, GlassFish for Embedded Suite, Jersey Web Services Framework, and Oracle Java SE Embedded 7 platform), created to provide value added services for collecting, managing, and transmitting data to embedded devices such as gateways and concentrators. Oracle Java ME Embedded 3.2 Oracle Java ME Embedded 3.2 is designed and optimized to meet the unique requirements of small embedded, low power devices such as micro-controllers and other resource-constrained hardware without screens or user interfaces. Think tiny. Really tiny. And think big.  Read more about Java Embedded at the Oracle Technology Network, and read The Java Source blog Java Embedded Releases from September.

  Read the article

• OWA for ios devices

  - by marc dekeyser

  Originally posted on: http://geekswithblogs.net/marcde/archive/2013/07/23/owa-for-ios-devices.aspxI was in the presentation launch of the OWA for ios devices and boy, does that look exciting! We now feature a full app for Office 365 supporting OWA offline and many more options. Support for Exchange 2013 on premise deployments is not there yet but is planned to come soon (when it's ready!)"Our goal is to help our customers remain productive anytime, anywhere.  This includes providing a great email experience on smartphones and tablets.  Windows Phone 8 comes with a top-notch native email client in Outlook Mobile, and we offer Exchange ActiveSync (EAS), which is the de-facto industry standard for accessing Exchange email on mobile devices.  In order to better support many of our customers who use their iPhones and iPads for work, we are introducing OWA for iPhone and OWA for iPad, which bring a native Outlook Web App experience to iOS devices!"Read more: http://blogs.office.com/b/office365tech/archive/2013/07/16/owa-for-iphone-and-owa-for-ipad.aspx

  Read the article

• Medical Devices which supports Direct access through Bluetooth Low Energy [on hold]

  - by Suganthan

  I have went through this link and came to know that we can directly interact with BLE devices to read and write data, so I just want to know some medical device which supports direct access to third-party application (we can directly access the data from the medical device data). Is their any devices which supports direct access to the data Note: I already went through medical devices like Withings and Fitbit

  Read the article

• Creating floppy drive special devices under Quantal

  - by JCCyC

  First, I'd like for the various special devices for different floppy capacities (like /dev/fd0u720 etc.) to be available. I tried to adapt some udev rules I found online. I tried this, which I saved as /etc/udev/rules.d/70-persistent-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy SUBSYSTEM=="block", KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) SUBSYSTEM=="block", KERNEL=="fd[0-9]*", ACTION=="add", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/%k" But to no avail. It seems the create_floppy_devices script isn't provided with 12.10. How do I obtain it? Second: I'm using MATE, and whenever I log in I get a message box saying it tried to mount the drive but failed. How do I disable this? Third (which is probably related to the second): Whenever there's a disk in the drive, the motor won't stop spinning. If I do a mdir of it, after it returns, the motor stops, and then starts again. I suspect there's some process in MATE doing this. UPDATE: For CentOS 6 (who does have a create_floppy_devices program) the following rules file worked. Saved as /etc/udev/rules.d/98-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) # drive A: is type 4 (1.44MB) - add other lines for other drives KERNEL=="fd0*", ACTION=="add", RUN+="/lib/udev/create_floppy_devices -c -t 4 -m %M -M 0660 -G floppy $root/%k"

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >