Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 6/215 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Connect devices plugged into Raspberry Pi ethernet to WiFi network

  - by Tom

  I'm just starting out on a mission to learn more about networking and I've followed a tutorial (http://raspberrypihq.com/how-to-turn-a-raspberry-pi-into-a-wifi-router/) to turn my Raspberry Pi into a wifi router. That worked really well so I modified it slightly so that I can use a tethered iphone for the internet connection - I just switched all "eth0" references to "eth1" (the iphone interface) and added a script to set everything up when the phone is plugged in. This setup has freed up the Pi's ethernet port so I'd like to try and take this a step further and allow devices plugged into it to connect to the network. If possible, I'd like to try adding a switch so I can connect multiple devices. I've tried fiddling around with nat & iptables with no luck so my question is, how can I connect devices on eth0 to my wlan network?

  Read the article

• Multi serial devices on one port

  - by adopilot

  I am developing one software for managing parking lot. System is designed to use four HID RFID devices for authorization clients on gates. Each device should be connected to server by Serial port RS232. Now I wondering is there some device or method to join all that devices on one device and after that to I have only one RS232 cable connected to server. My problem is in that RFID card readers are simple (stupid) devices and there I am not able to change anything, but Ill like to know from which specific device is coming input. What Ill want to do with that new device which need to join four readers is to add suffix or prefix to string that sent from RFID card reader. So I can identify device that is sending card number to my server. I am developing my system on Win platforms.

  Read the article

• IMAP proxy as a POP3 hub?

  - by mailman stan

  Simple scenario, complicated technology: One family receiving mail from five email addresses via POP3 into one Outlook inbox on a single PC. Now we'd like to be able to replicate that single inbox across multiple devices (eg. desktop PC, laptop, netbook, smartphone). If we continue using POP3 as the mail transfer protocol, messages will be downloaded to one device and will not be visible to the others; replies will likewise be isolated on the sending machine. If we switch to IMAP, I understand that we can have multiple devices maintaining a shared view of an inbox hosted at the server end, but what about multiple accounts? I tried changing the account configuration in Outlook to fetch from the mail providers' IMAP service instead of POP3, which does give a shared view across multiple devices but also causes Outlook to create a separate inbox and PST for each account. This is awkward because it means there are five separate folders that need to be checked, and Outlook tools like search filters and rules don't seem to work across accounts. To get what I want (five accounts delivered into one shared mailbox) it seems that I would need some sort of intervening server that collects mail (using POP3) from all our accounts into a single inbox while preserving the original destination addresses, and then serves it up to all our devices using IMAP. Is this workable? Is it a good approach? Is there an easier way?

  Read the article

• Proper Drivers for 10.10 Realtek RTL8176 Wireless and Synaptic V7.2 Touchpad Devices

  - by av7000

  I have a new Toshiba Satellite L645-S4059. This is an Intel i3 64 bit machine. Two problems have occurred that I would like to fix before transferring my work from my old compaq laptop. First I can't get the wireless driver to work properly. I went to the realtek driver site and couldn't find the 8176. Instead I was shuttled to the 8188 which uses a 8192 software release. I am not sure if the kernel is just missing the name. Second I have a synaptics V7.2 touchpad which is just flaky. It eventually freezes up so I am just using a USB mouse. Appreciate anybody's experience on this.

  Read the article

• Creating block devices for openstack deployment using MAAS and juju (nova-volume deployment)

  - by Tom Van Hoof

  Hi, I'm currently trying to get a openstack deployment working by using MAAS with 9 nodes and juju. To do this I found this guide, working with ubuntu 12.04 LTS https://help.ubuntu.com/community/UbuntuCloudInfrastructure and followed it as good as I can. After a vigorous amount of trial and error I finally got to the point where I'm supposed to deploy nova-volume using the "custom" config file. However when my node is started and shows up as running in the "juju status" report the service reports the installation failed. I'm trying to install with juju jitsu by the way. I think it has something to do with the following statement in the openstack.cfg file : nova-volume: # This must be a free block device that is writable on the nova-volume host. block-device: "xvdb" overwrite: "true" I did some research and found that (at least I think) this refers to a Xen Virtual Drive/device, and because the device is not present on the node it's being deployed to, the installation fails. What I don't understand is how I am supposed to have such a block device available on a machine which was completely managed by MAAS. Does anyone here have any experience with this and knows of a way to solve this, or am I missing something big here. Some kind of missing link between the MAAS and a separate XEN host ? My MAAS server is ubuntu 12.04LTS Server. All help is welcome. Kind regards, Tom

  Read the article

• Text inside <p> shrinks on mobile devices while div does not [migrated]

  - by guisasso

  I asked this question on stack overflow, but didn't get any answers, so I'm trying here. Does anybody know whats happening here? I tested on opera, dolphin and the factory android browser. (although it seems now to be working on opera) The div doesn't change size, but the text somehow is shrunk to fit on part of a div. Anyway to prevent this? Just to be clear, I'm trying to achieve on the mobile browser the same look as the pc version. As the problem seems to be with the browsers, how can I force the text to take the full width of the div? I tried setting the p tag to 100% with no success. The div has to have that width and be aligned to the left of the page. On a Pc, as it should be: I shrunk the code as much as I could: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang="en-us"> <head> <meta content="text/html; charset=utf-8" http-equiv="Content-Type" /> <meta content="" name="keywords" /> <meta content="" name="description" /> <title></title> </head> <body> <div style="width:1000px; margin-left:auto; margin-right:auto;" > <div style="float:left; width:758px; background-color:aqua;"> <p> Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text .<br /> <br /> Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text Random text .<br /> <br /> Random text Random text Random text Random text <a href="http://www.a.com/a.html"> Random text </a> Random text Random text . </p> </div> </div> </body> </html> Thanks.

  Read the article

• How to Quickly Encrypt Removable Storage Devices with Ubuntu

  - by Chris Hoffman

  Ubuntu can quickly encrypt USB flash drives and external hard drives. You’ll be prompted for your passphrase each time you connect the drive to your computer – your private data will be secure, even if you misplace the drive. Ubuntu’s Disk Utility uses LUKS (Linux Unified Key Setup) encryption, which may not be compatible with other operating systems. However, the drive will be plug-and-play with any Linux system running the GNOME desktop. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• “No Network Devices Available” for BCM43241(SDIO) after fresh install of 13.10

  - by 200gaga

  I have a laptop vaio duo 13 which has a broadcom 43241 wireless card. My problem is similar to this one Broadcom Wi-Fi Adapter not recognized . I tried to install the driver brcmfmac(SDIO) here http://wireless.kernel.org/en/users/Drivers/brcm80211 and copied the nvram to /lib/firmware/brcm as the page tells, but this didn't work. Most questions I searched are about br43 such as How to Install Broadcom Wireless Drivers (BCM43xx) . I tried part of solution like unblock all in rfkill, put an # in front of blacklist bcm43xx, but none worked. I didn't uninstall or install any drivers such as b43-installer, b43legacy-installer, bcmwl-kernel-source (only tried b43-fwcutter) because they are not compatible with bcm43241. Above is all information I can provide for help. Thanks.

  Read the article

• Tools to simulate mobile devices on a desktop to test websites

  - by Kris

  Are there any good tools that can be run on desktop machines (Windows or Linux) that can simulate a mobile device, preferably with some options as to screen size and mobile browser (user agent if not full render engine). I know it is never going to be perfect (especially without an actual touchscreen), but having a tool on our development machines to do what testing we can that way would be very useful.

  Read the article

• Questions and Answers: Loopback devices

  <b>Distrowatch:</b> "Going-around-in-circles asks: What is a loopback device and how do I use it?"

  Read the article

• hotspot in ubuntu 12.10 using hostapd unable to connect other devices

  - by MuffinStateWide

  I've created a hotspot using hostapd ad I cant connect any other device to it.all i get are a mixture of 3 errors unable to connect to kernel driver unable to set beacon parameters (which are set in my config file) or I get stuck at the authentication stage and it times out I'm using a TP-Link wireless N PCI card WN-951N (which does not support master mode) and the version provided by ubuntu in the repos. ps. this setup worked flawlessly in 12.04 LTS Any extra information, just let me know and i'll get it to you ASAP

  Read the article

• Is the STL efficient enough for mobile devices?

  - by mx2

  When it comes to mobile game development on iOS and Android NDK, some developers write their own C++ containers, while others claim that STL is more than adequate for mobile game development (For example, the author of iPhone 3D Programming uses STL rather than Objective-C in his examples. His defense is that STL is no slower than Objective-C). Then there are also mobile developers who abandon C++ entirely and develop games entirely (or mostly) in the C language (C89/C90). What are the benefits and drawbacks of each approach?

  Read the article

• All-around programming language for use on desktop and mobile devices

  - by mdm414 ZX

  Given that I am a PHP programmer and open-source is a must, what would be the best and practical programming language to use for all of the following: A desktop/cross-platform application. I've read that with HTML5, creating offline apps are possible? A web application. Android and iPhone/iPad apps. I am leaning towards using Python but I am not sure if it is possible to use it alone for all of them. There are other languages that I am also looking at like Ruby, Scala and Java. Kindly share your thoughts and experiences on this one. Thanks :-)

  Read the article

• How To Use USB Drives With the Nexus 7 and Other Android Devices

  - by Chris Hoffman

  The Nexus 7 may not have a lot of storage space – especially the original 8 GB model – but you can connect a USB drive to it if you want to watch videos or access other files. Unfortunately, Android doesn’t automatically mount USB drives by default. You’ll need to root your device to enable support for USB drives. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• Problems syncing photos and strange effects of uploaded files from other devices

  - by Daniel

  I have a Galaxy Spica (GT-i5700) Android v2.1, rooted with Leshak dev 7 #123. But never mind the root info, the problem would be the same unrooted. The photos from this phone is stored in "sdcard/images", nevertheless the phone also creates a "sdcard/DCIM" but only stores some thumbnails there. Problem nr 1: U1 only reads the DCIM-folder for automatic photo-upload. So photos stored in this phone is not uploaded. If I move photos to "DCIM" folder, U1 recognises the photos and start uploading them. Possible solution: Could there be an option in the settings, to set preferred photo folder? Problem nr 2: Out of 74 pictures, 12 did not get uploaded. Pressing "Retry failed transfers" in Settings does nothing. Pressing the files where status is "Upload failed, tap to retry" only changes the status to "Uploading..." but nothing gets uploaded. If I upload another file to U1, it is uploaded directly without any problem. It has nothing to do with file size, 1,1 MB files has been uploaded fine whilst some failed are 0,8 MB. Problem nr 3: The photos from DCIM are in my case uploaded to a folder called "Pictures - GT-I5700" in U1. If I log in to the homepage and from there upload another photo in "Pictures - GT-I5700", it shows up in U1 on my phone fine. But when I tap it, U1 downloads the photo to "sdcard/U1/Pictures - GT-I5700". If it sync photos from "sdcard/DCIM" to a specific folder, why not also download files to the same folder from which it is synced? After a while of usage, syncing and uploading files from different clients it would be a mishmash of folders and places files are stored and considering that I see no use of U1 at all. Another question: If my SD card in some way breaks down/some folders cannot be read/card temporarly changed and U1 is running, does U1 consider that as files deleted and also delete from the cloud?

  Read the article

• Upgrade to 0.25, files served to uPNP devices cannot play

  - by David Buttrick

  I have a Sony BDP-S390 bluray & network player. I upgraded my Myth server to 0.25. When I browse to the Myth server, and try to play a recording, I get an error message about the file not being payable in the player. Interestingly, the files that i have recorded, and the videos that I have loaded into my Video volume group are .mpg or .mp4. The player shows the filetype that it thinks the file is in it's list, and it claims that these files are AVI files, however none of them are. They are all .mp4 or .mpg files. Thinking that that was just an optical illusion, I went ahead and tried to play a file, but I get an error about the file not being playable. First of all, is there something that I need to do to make the uPNP server know about different filetypes? Is it reporting AVI because it hasn't been told about MPG or MP4? Second, I'd like to help out some more here and collect some logging about the uPNP server in the myth server. I cant seem to find information on how to turn on logging, and there is no mythbackend settings file int /etc/default. Thanks very much.

  Read the article

• No sound, even though devices appear OK

  - by Felix

  I have a weird problem. Sound used to work until a couple of days ago, but now the builtin speakers in my ThinkPad W520 have stopped working. This happened after either: An update Using the headphone jack in my laptop dock (I had used the jack in the actual laptop before without issues) As I was saying, the speakers do not work at all. Sometimes I get a clicking sound from the laptop, which I assume is the system beep. This does not happen consistently. If I plug headphones in the laptop, I do get sound in them. I have tried playing with all the possible settings both in gnome and using alsamixer. Some screens: What could I try next?

  Read the article

• play sound from different applications on different output devices (speakers, headphones)

  - by Mike

  I want music (played e.g. via Audacious) to be played on speaker system, and all other sounds produced by other applications (including ubuntu sound effects) to be played on headphones. My computer has sound connectors at its back, and also connectors on its front panel. When I connect both headphones and speakers, only headphones work (I take it, the front connectors take precedence?). Should I purchase another sound card (in addition to the motherboard-integrated sound I have)? When I go to Audacious output settings, I see only the ouput plugin selection list, with PulseAudio selected and options like ALSA, OSS4 etc. But there's no facility to select particular output device (and I guess it wouldn't magically appear even if I had the second soundcard). Is this at all possible to bind specific application to particular output device?

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• Samsung devices JSR75 'skip()' problem and solution

  How to solve the skip limitation of Samsung JSR75.

  Read the article

• Researchers Team Up on UIs for Mobile Devices

  Researchers from IBM, Japan, India form collaborative research program IBM - Japan - India - Asia - Organizations

  Read the article

• How to download an MP3 or ZIP file onto mobile devices

  - by Hope4You

  I want to be able to download digital goods to smartphone users (music in format .mp3 or .zip). But iPhone and iPad do not allow direct forced downloads. How can I provide mobile users with digital downloads? I use PHP. The only way I can think of to do this is to use the Dropbox Web API to transfer files to the user's Dropbox account, which then synchronizes with their mobile device. Any other suggestions would be appreciated.

  Read the article

• Server costs and back loading for mobile devices

  - by user23844

  A company approached me to design an MMO for the mobile platform and I have the perfect idea for them. My question is how much would a server for a FTP game that has both a PVE element and PVP cost? Also do you think that it would be better or is it even possible to back load the data onto the phones (trying to come up with some interesting way to back up the data in case of emergency). I don't want the game to be totally online reliant (I want to appeal to not only phone users but also iPod touch users) and for there to be an offline mode. If you can't tell this is my first game besides simple projects I've done on the side. Any help would be greatly appreciated.

  Read the article

• Can't open any of my drives/devices(not USB drive)

  - by Anontu

  I can't open any of my computer drives (:c/,:d/.....) Every time i tried to open the drives, the following notice appeared: (i'm new in Ask Ubuntu,so,i can't upload the snapshot,i need 10 reputations to do that) **Unable to access "__ Volume"** error mounting/dev/sda7at/media/MyPC/__Volume:Command-Line 'mount-t "ntfs"-o "uhelper=udisk2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177""/ dev/sda7""/media/MyPC/__Volume"' exited with non-zero exit status 14:The disk contains an unclean file system (0,0).| Metadata Kept in Windows cache,refused to mount. Failed to mount '/dev/sda7':Operation not permitted The NTFS partition is in an unsafe state.Please,resume and shutdown Windows fully(no hibernation or fast restarting),or mount the volume read-only with the 'ro' mount option. I have Windows side by side Ubuntu 13.04 in my computer and i have done (like-Shutting down Windows properly...) things as these in the notice. But it's not working.

  Read the article

• IBM hopes to make mobile devices more accessible

  <b>CNet:</b> "IBM is embarking on a research project to design mobile gadgets that are easier to use for people who have disabilities or aren't fully literate."

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >