Search Results

Search found 23208 results on 929 pages for 'event loop'.

Page 1/929 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

  - by Tim Evans

  Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

  Read the article

• In Javascript event handling, why "return false" or "event.preventDefault()" and "stopping the event

  - by Jian Lin

  It is said that when we handle a "click event", returning false or calling event.preventDefault() makes a difference, in which the difference is that preventDefault will only prevent the default event action to occur, i.e. a page redirect on a link click, a form submission, etc. and return false will also stop the event flow. Does that mean, if the click event is registered several times for several actions, using $('#clickme').click(function() { … }) returning false will stop the other handlers from running? I am on a Mac now and so can only use Firefox and Chrome but not IE, which has a different event model, and tested it on FF and Chrome and all 3 handlers ran without any stopping…. so what is the real difference, or, is there a situation where "stopping the event flow" is not desirable? this is related to http://stackoverflow.com/questions/3042036/using-jquerys-animate-if-the-clicked-on-element-is-a-href-a and http://stackoverflow.com/questions/2017755/whats-the-difference-between-e-preventdefault-and-return-false

  Read the article

• Query specific logs from event log using nxlog

  - by user170899

  Below is my nxlog configuration define ROOT C:\Program Files (x86)\nxlog Moduledir %ROOT%\modules CacheDir %ROOT%\data Pidfile %ROOT%\data\nxlog.pid SpoolDir %ROOT%\data LogFile %ROOT%\data\nxlog.log <Extension json> Module xm_json </Extension> <Input internal> Module im_internal </Input> <Input eventlog> Module im_msvistalog Query <QueryList>\ <Query Id="0">\ <Select Path="Security">*</Select>\ </Query>\ </QueryList> </Input> <Output out> Module om_tcp Host localhost Port 3515 Exec $EventReceivedTime = integer($EventReceivedTime) / 1000000; \ to_json(); </Output> <Route 1> Path eventlog, internal => out </Route> <Select Path="Security">*</Select>\ - * gets everything from the Security log, but my requirement is to get specific logs starting with EventId - 4663. How do i do this? Please help. Thanks.

  Read the article

• Attached event triggering if event is same as current event

  - by Psytronic

  I have a button which start/stops a timer. When I click it, I remove the current event handler, and attach the opposite one. Ie, click "Stop", and the "Start" function is attached for the next click. However in IE (7), not sure about 8. The newly attached event is also triggering after the original function is finished: Lifeline in IE7: Button pushed -- "Stop" function begins -- "Stop" function removed -- "Start" function attached -- "Stop" function finishes -- "Start" function is called. I know it's to do with the attaching event bit, because If I remove it, the Start event doesn't fire. This seems a bit odd, as I have the same situation in the "Start" function, ie, "Start" removed, "Stop" called. But this doesn't seem to cause an infinite loop, thankfully. if(btn.attachEvent){ btn.detachEvent("onclick", stop); btn.attachEvent("onclick", start); }else if(btn.addEventListener){ btn.removeEventListener("click", stop, true); btn.addEventListener("click", start , true); } It all works fine in FF and Chrome. I have switched the order of attach/detach, just to see if it makes a difference, but it doesn't. Addendum Sorry, and no answers involving jQuery, Protoype et al. Its not something I want to integrate for this project.

  Read the article

• how to do event checks for loops?

  - by yao jiang

  I am having some trouble getting the logic down for this. Currently, I have an app that animates the astar pathfinding algorithm. On start of the app, the ui will show the following: User can press "space" to randomly choose start/end coords, then the app will animate it. Or, user can choose the start/end by left-click/right-click. During the animation, the user can also left-click to generate blocks, or right-click to choose a new destiantion. Where I am stuck at is how to handle the events while the app is animating. Right now, I am checking events in the main loop, then when the app is animating, I do event checks again. While it works fine, I feel that I am probably doing it wrong. What is the proper way of setting up the main loop that will handle the events while the app is animating? In main loop, the app start animating once user choose start/end. In my draw function, I am putting another event checker in there. def clear(rows): for r in range(rows): for c in range(rows): if r%3 == 1 and c%3 == 1: color = brown; grid[r][c] = 1; buildCoor.append(r); buildCoor.append(c); else: color = white; grid[r][c] = 0; pick_image(screen, color, width*c, height*r); pygame.display.flip(); os.system('cls'); # draw out the grid def draw(start, end, grid, route_coord): # draw the end coords color = red; pick_image(screen, color, width*end[1],height*end[0]); pygame.display.flip(); # then draw the rest of the route for i in range(len(route_coord)): # pausing because we want animation time.sleep(speed); # get the x/y coords x,y = route_coord[i]; event_on = False; if grid[x][y] == 2: color = green; elif grid[x][y] == 3: color = blue; for event in pygame.event.get(): if event.type == pygame.MOUSEBUTTONDOWN: if event.button == 3: print "destination change detected, rerouting"; # get mouse position, px coords pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; grid[r][c] = 4; end = [r, c]; elif event.button == 1: print "user generated event"; pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; # mark it as a block for now grid[r][c] = 1; event_on = True; if check_events([x,y]) or event_on: # there is an event # mark it as a block for now grid[y][x] = 1; pick_image(screen, event_x, width*y, height*x); pygame.display.flip(); # then find a new route new_start = route_coord[i-1]; marked_grid, route_coord = find_route(new_start, end, grid); draw(new_start, end, grid, route_coord); return; # just end draw here so it wont throw the "index out of range" error elif grid[x][y] == 4: color = red; pick_image(screen, color, width*y, height*x); pygame.display.flip(); # clear route coord list, otherwise itll just add more unwanted coords route_coord_list[:] = []; clear(rows); # main loop while not done: # check the events for event in pygame.event.get(): # mouse events if event.type == pygame.MOUSEBUTTONDOWN: # get mouse position, px coords pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; # find which button pressed, highlight grid accordingly if event.button == 1: # left click, start coords if grid[r][c] == 2: grid[r][c] = 0; color = white; elif grid[r][c] == 0 or grid[r][c] == 4: grid[r][c] = 2; start = [r,c]; color = green; else: grid[r][c] = 1; color = brown; elif event.button == 3: # right click, end coords if grid[r][c] == 4: grid[r][c] = 0; color = white; elif grid[r][c] == 0 or grid[r][c] == 2: grid[r][c] = 4; end = [r,c]; color = red; else: grid[r][c] = 1; color = brown; pick_image(screen, color, width*c, height*r); # keyboard events elif event.type == pygame.KEYDOWN: clear(rows); # one way to quit program if event.key == pygame.K_ESCAPE: print "program will now exit."; done = True; # space key for random start/end elif event.key == pygame.K_SPACE: # first clear the ui clear(rows); # now choose random start/end coords buildLoc = zip(buildCoor,buildCoor[1:])[::2]; #print buildLoc; (start_x, start_y, end_x, end_y) = pick_point(); while (start_x, start_y) in buildLoc or (end_x, end_y) in buildLoc: (start_x, start_y, end_x, end_y) = pick_point(); clear(rows); print "chosen random start/end coords: ", (start_x, start_y, end_x, end_y); if (start_x, start_y) in buildLoc or (end_x, end_y) in buildLoc: print "error"; # draw the route marked_grid, route_coord = find_route([start_x,start_y],[end_x,end_y], grid); draw([start_x, start_y], [end_x, end_y], marked_grid, route_coord); # return key for user defined start/end elif event.key == pygame.K_RETURN: # first clear the ui clear(rows); # get the user defined start/end print "user defined start/end are: ", (start[0], start[1], end[0], end[1]); grid[start[0]][start[1]] = 1; grid[end[0]][end[1]] = 2; # draw the route marked_grid, route_coord = find_route(start, end, grid); draw(start, end, marked_grid, route_coord); # c to clear the screen elif event.key == pygame.K_c: print "clearing screen."; clear(rows); # go fullscreen elif event.key == pygame.K_f: if not full_sc: pygame.display.set_mode([1366, 768], pygame.FULLSCREEN); full_sc = True; rows = 15; clear(rows); else: pygame.display.set_mode(size); full_sc = False; # +/- key to change speed of animation elif event.key == pygame.K_LEFTBRACKET: if speed >= 0.1: print SPEED_UP; speed = speed_up(speed); print speed; else: print FASTEST; print speed; elif event.key == pygame.K_RIGHTBRACKET: if speed < 1.0: print SPEED_DOWN; speed = slow_down(speed); print speed; else: print SLOWEST print speed; # second method to quit program elif event.type == pygame.QUIT: print "program will now exit."; done = True; # limit to 20 fps clock.tick(20); # update the screen pygame.display.flip();

  Read the article

• Call a function when "event.GetFrom(m_cpVoice)==S_OK" (ergo when event happens) [SAPI 5.1 and C++]

  - by Jesuskiewicz

  Hello, I'm doing a project with a 3D model, that speaks. So, I'm using SAPI 5.1, and I want to call a function asynchronously when there's a Viseme event (in order to play the animation related to). How could I do it? Thank you very much. Note: I use : hRes = m_cpVoice-Speak(L"All I want is to solve this problem", SPF_ASYNC , NULL); And I know the CspEvent, event.eEventId . All I want is how to call a function when Sapi event happens

  Read the article

• Is an event loop just a for/while loop with optimized polling?

  - by Alan

  I'm trying to understand what an event loop is. Often the explanation is that in the event loop, you do something until you're notified that an event occurred. You than handle the event and continue doing what you did before. To map the above definition with an example. I have a server which 'listens' in a event loop, and when a socket connection is detected, the data from it gets read and displayed, after which the server goes to the listening it did before. However, this event happening and us getting notified 'just like that' are to much for me to handle. You can say: "It's not 'just like that' you have to register an event listener". But what's an event listener but a function which for some reason isn't returning. Is it in it's own loop, waiting to be notified when an event happens? Should the event listener also register an event listener? Where does it end? Events are a nice abstraction to work with, however just an abstraction. I believe that in the end, polling is unavoidable. Perhaps we are not doing it in our code, but the lower levels (the programming language implementation or the OS) are doing it for us. It basically comes down to the following pseudo code which is running somewhere low enough so it doesn't result in busy waiting: while(True): do stuff check if event has happened (poll) do other stuff This is my understanding of the whole idea, and i would like to hear if this is correct. I am open in accepting that the whole idea is fundamentally wrong, in which case I would like the correct explanation. Best regards

  Read the article

• Label in PyQt4 GUI not updating with every loop of FOR loop

  - by user297920

  I'm having a problem, where I wish to run several command line functions from a python program using a GUI. I don't know if my problem is specific to PyQt4 or if it has to do with my bad use of python code. What I wish to do is have a label on my GUI change its text value to inform the user which command is being executed. My problem however, arises when I run several commands using a for loop. I would like the label to update itself with every loop, however, the program is not updating the GUI label with every loop, instead, it only updates itself once the entire loop is completed, and displays only the last command that was executed. I am using PyQt4 for my GUI environment. And I have established that the text variable for the label is indeed being updated with every loop, but, it is not actually showing up visually in the GUI. Is there a way for me to force the label to update itself? I have tried the update() and repaint() methods within the loop, but they don't make any difference. I would really appreciate any help. Thank you. Ronny. Here is the code I am using: # -*- coding: utf-8 -*- import sys, os from PyQt4 import QtGui, QtCore Gui = QtGui Core = QtCore # ================================================== CREATE WINDOW OBJECT CLASS class Win(Gui.QWidget): def __init__(self, parent = None): Gui.QWidget.__init__(self, parent) # --------------------------------------------------- SETUP PLAY BUTTON self.but1 = Gui.QPushButton("Run Commands",self) self.but1.setGeometry(10,10, 200, 100) # -------------------------------------------------------- SETUP LABELS self.label1 = Gui.QLabel("No Commands running", self) self.label1.move(10, 120) # ------------------------------------------------------- SETUP ACTIONS self.connect(self.but1, Core.SIGNAL("clicked()"), runCommands) # ======================================================= RUN COMMAND FUNCTION def runCommands(): for i in commands: win.label1.setText(i) # Make label display the command being run print win.label1.text() # This shows that the value is actually # changing with every loop, but its just not # being reflected in the GUI label os.system(i) # ======================================================================== MAIN # ------------------------------------------------------ THE TERMINAL COMMANDS com1 = "espeak 'senntence 1'" com2 = "espeak 'senntence 2'" com3 = "espeak 'senntence 3'" com4 = "espeak 'senntence 4'" com5 = "espeak 'senntence 5'" commands = (com1, com2, com3, com4, com5) # --------------------------------------------------- SETUP THE GUI ENVIRONMENT app = Gui.QApplication(sys.argv) win = Win() win.show() sys.exit(app.exec_())

  Read the article

• How does this game loop actually work?

  - by Nicolai

  I read this playfulJS post, about ray-casting: http://www.playfuljs.com/a-first-person-engine-in-265-lines/ It looks really interested, so I decided to look at his javascript. I am no expert in javascript, so I quickly got lost. It's the game loop "object" that really gets me. I simply don't understand how it works. From the code: function GameLoop() { this.frame = this.frame.bind(this); this.lastTime = 0; this.callback = function() {}; } GameLoop.prototype.start = function(callback) { this.callback = callback; requestAnimationFrame(this.frame); }; GameLoop.prototype.frame = function(time) { var seconds = (time - this.lastTime) / 1000; this.lastTime = time; if (seconds < 0.2) this.callback(seconds); requestAnimationFrame(this.frame); }; var loop = new GameLoop(); loop.start(function frame(seconds) { map.update(seconds); player.update(controls.states, map, seconds); camera.render(player, map); }); Now, what really confuses me here, is this bind stuff and how this actually loops. I am guessing, that if less than 0.2 seconds have passed, since the last time the loop was run, it simply goes back to re-check the time. If more than 0.2 seconds have passed, it leaves the frame function, and executes the 3 lines in the loop. But, if this is true, then how does the loop.start() get called again? And what on earth is the meaning of this.frame = this.frame.bind(this);? I've looked up prototypes bind() but I really don't understand it.

  Read the article

• In Perl, is a while loop generally faster than a for loop?

  - by Mike

  I've done a small experiment as will be shown below and it looks like that a while loop is faster than a for loop in Perl. But since the experiment was rather crude, and the subject might be a lot more complicated than it seems, I'd like to hear what you have to say about this. Thanks as always for any comments/suggestions :) In the following two small scripts, I've tried while and for loops separately to calcaulte the factorial of 100,000. The one that has the while loop took 57 minutes 17 seconds to finish while the for loop equivalent took 1 hour 7 minutes 54 seconds. Script that has while loop: use strict; use warnings; use bigint; my $now = time; my $n =shift; my $s=1; while(1){ $s *=$n; $n--; last if $n==2; } print $s*$n; $now = time - $now; printf("\n\nTotal running time: %02d:%02d:%02d\n\n", int($now / 3600), int(($now % 3600) / 60), int($now % 60)); Script that has for loop: use strict; use warnings; use bigint; my $now = time; my $n =shift; my $s=1; for (my $i=2; $i<=$n;$i++) { $s = $s*$i; } print $s; $now = time - $now; printf("\n\nTotal running time: %02d:%02d:%02d\n\n", int($now / 3600), int(($now % 3600) / 60), int($now % 60));

  Read the article

• SQLAuthority News – Book Signing Event – SQLPASS 2011 Event Log

  - by pinaldave

  I have been dreaming of writing book for really long time, and I finally got the chance – in fact, two chances!  I recently wrote two books: SQL Programming Joes 2 Pros: Programming and Development for Microsoft SQL Server 2008 [Amazon] | [Flipkart] | [Kindle] and SQL Wait Stats Joes 2 Pros: SQL Performance Tuning Techniques Using Wait Statistics, Types & Queues [Amazon] | [Flipkart] | [Kindle].  I had a lot of fun writing these two books, even though sometimes I had to sacrifice some family time and time for other personal development to write the books. The good side of writing book is that when the efforts put in writing books are recognize by books readers and kind organizations like expressor studio. Book Signing Event Book writing is a complex process.  Even after you spend months, maybe years, writing the material you still have to go through the editing and fact checking processes.  And, once the book is out there, there is no way to take back all the copies to change mistakes or add something you forgot.  Most of the time it is a one-way street. Book Signing Event Just like every author, I had a dream that after the books were written, they would be loved by people and gain acceptance by an audience. My first book, SQL Programming Joes 2 Pros: Programming and Development for Microsoft SQL Server 2008, is extremely popular because it helps lots of people learn various fundamental topics. My second book covers beginning to learn SQL Server Wait Stats, which is a relatively new subject. This book has had very good acceptance in the community. Book Signing Event Helping my community is my primary focus, so I was happy to see this year’s SQLPASS tag line: ‘This is a Community.‘ At the event, the expressor studio guys came up with a very novel idea. They had previously used my books and they had found them very useful. They got 100 copies of the book and decided to give it away to community folks. They invited me and my co-author Rick Morelan to hold a book signing event. We did a book signing on Thursday between 1 pm and 2 pm. Book Signing Event This event was one of the best events for me. This was my first book signing event outside of India. I reached the book signing location around 20 minutes before the scheduled time and what I saw was a big line for the book signing event. I felt very honored looking at the crowd and all the people around the event location. I felt very humbled when I saw some of my very close friends standing in the line to get my signature. It was really heartwarming to see so many enthusiasts waiting for more than an hour to get my signature. While standing in line I had the chance to have a conversation with every single person who showed up for the signature. I made sure that I repeated every single name and wrote it in every book with my signature. There is saying that if we write a name once we will remember it forever. I want to remember all of you who saw me at the book signing. Your comments were wonderful, your feedback was amazing and you were all very supportive. Book Signing Event I have made a note of every conversation I had with all of you when I was signing the books. Once again, I just want to express my thanks for coming to my book signing event. The whole experience was very humbling. On the top of it, I want to thank the expressor studio people who made it possible, who organized the whole signing event. I am so thankful to them for facilitating the whole experience, which is going to be hard to beat by any future experience. My books Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL PASS, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• Help with converting foreach loop to while loop in c#

  - by James Dawson

  I had learnt by reading your great answers here, that it is not good practice deleting items from within a foreach loop, as it is (and I quote) "Sawing off the branch you're sitting on". My code currently removes the text from the dropdownlist, but the actual item remains (just without text displayed). In other words, it isn't deleting, and probably can't because you can't delete from within a foreach loop. After hours of trying I am unable to get my head around a way of doing it. //For each checked box, run the delete code for (int i = 0; i < this.organizeFav.CheckedItems.Count; i++) { //this is the foreach loop foreach (ToolStripItem mItem in favoritesToolStripMenuItem.DropDownItems) { //This rules out seperators if (mItem is ToolStripMenuItem) { ToolStripMenuItem menuItem = mItem as ToolStripMenuItem; //This matches the dropdownitems text to the CheckedItems String if (((ToolStripMenuItem)mItem).Text.ToString() == organizeFav.CheckedItems[i].ToString()) { //And deletes the item menuItem.DropDownItems.Remove(mItem); } } } } But it isn't deleting because it is within a foreach loop! I would greatly appreciate your help, and be truly amazed if anyone can get their head around this code :) Kind Regards

  Read the article

• User is trying to leave! Set at-least confirm alert on browser(tab) close event!!

  - by kaushalparik27

  This is something that might be annoying or irritating for end user. Obviously, It's impossible to prevent end user from closing the/any browser. Just think of this if it becomes possible!!!. That will be a horrible web world where everytime you will be attacked by sites and they will not allow to close your browser until you confirm your shopping cart and do the payment. LOL:) You need to open the task manager and might have to kill the running browser exe processes.Anyways; Jokes apart, but I have one situation where I need to alert/confirm from the user in any anyway when they try to close the browser or change the url. Think of this: You are creating a single page intranet asp.net application where your employee can enter/select their TDS/Investment Declarations and you wish to at-least ALERT/CONFIRM them if they are attempting to:[1] Close the Browser[2] Close the Browser Tab[3] Attempt to go some other site by Changing the urlwithout completing/freezing their declaration.So, Finally requirement is clear. I need to alert/confirm the user what he is going to do on above bulleted events. I am going to use window.onbeforeunload event to set the javascript confirm alert box to appear.    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }    </script>See! you are halfway done!. So, every time browser unloads the page, above confirm alert causes to appear on front of user like below:By saying here "every time browser unloads the page"; I mean to say that whenever page loads or postback happens the browser onbeforeunload event will be executed. So, event a button submit or a link submit which causes page to postback would tend to execute the browser onbeforeunload event to fire!So, now the hurdle is how can we prevent the alert "Not to show when page is being postback" via any button/link submit? Answer is JQuery :)Idea is, you just need to set the script reference src to jQuery library and Set the window.onbeforeunload event to null when any input/link causes a page to postback.Below will be the complete code:<head runat="server">    <title></title>    <script src="jquery.min.js" type="text/javascript"></script>    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }        $(function() {            $("a").click(function() {                window.onbeforeunload = null;            });            $("input").click(function() {                window.onbeforeunload = null;            });        });    </script></head><body>    <form id="form1" runat="server">    <div></div>    </form></body></html>So, By this post I have tried to set the confirm alert if user try to close the browser/tab or try leave the site by changing the url. I have attached a working example with this post here. I hope someone might find it helpful.

  Read the article

• breaking out of for loop when running a function inside a for loop

  - by andrewj

  I'm embarrassed that I'm asking this question, but here I go: Suppose you have the following function foo. When I'm running a for loop, I'd like it to skip the remainder of foo when foo initially returns the value of 0. However, break doesn't work when it's inside a function. As it's currently written, I get an error message, no loop to break from, jumping to top level. Any suggestions? foo <- function(x) { y <- x-2 if (y==0) {break} # how do I tell the for loop to skip this z <- y + 100 z } for (i in 1:3) { print(foo(i)) }

  Read the article

• breaking out of for loop when running a function inside a for loop in R

  - by andrewj

  I'm embarrassed that I'm asking this question, but here I go: Suppose you have the following function foo. When I'm running a for loop, I'd like it to skip the remainder of foo when foo initially returns the value of 0. However, break doesn't work when it's inside a function. As it's currently written, I get an error message, no loop to break from, jumping to top level. Any suggestions? foo <- function(x) { y <- x-2 if (y==0) {break} # how do I tell the for loop to skip this z <- y + 100 z } for (i in 1:3) { print(foo(i)) }

  Read the article

• Need to convert this for loop to a while loop

  - by Bragaadeesh

  Hi guys, I solved a problem recently. But I have this one piece of code where I dont utilize the for loop initialization and condition check. It looks a bit odd that way for a for loop. I want to convert it into a while loop. Please help me do it. I tried many times, but somewhere something is missing. for(;;current =(current+1)%n){ if(eliminated[current%n]){ continue; }else{ inkiPinki++; if(inkiPinki == m){ eliminated[current%n] = true; printStatus(eliminated, people); remainingGuys--; break; } } } In the above code eliminiated[index] is a boolean.

  Read the article

• for loop will not loop

  - by Bjørn Jostein Aurheim

  I have a for loop that I will use to compute time intervals to add to an ArrayList. The problem is that I can not prove that the for loop is being executed. Nothing is printed when using the system.out.println() statement, and nothing is added to the array from inside the loop ... any sugestions? // lager tidspunkter og legger disse inn i en Array kalt tider tid.setTimer(16); tid.setMinutter(0); tid.setSekunder(0); tider.add(tid.asString());// String "16:00" is added as it should System.out.println("tiden er: "+tid.asString());// gives 16:00 printed for(int i=0;i>12;i++){ System.out.println("er i løkken");// gives nothing printed tid.increaseMinutter(30); System.out.println(tid.asString());// gives nothing printed tider.add(tid.asString()); }

  Read the article

• Rewriting .each() loop as for loop to optimize, how to replicate $(this).attr()

  - by John B

  I running into some performance issues with a jquery script i wrote when running in ie so I'm going through it trying to optimize any way possible. Apparently using for loops is way faster than using the jQuery .each method. This has led me to a question regarding the equivalent of $(this) inside a for loop. I'm simplifying what I'm doing in my loop down to just using an attr() function as it gets across my main underlying question. Im doing this with each(simplified) var existing = $('#existing'); existing.each(function(){ console.log($(this).attr('id')); }); And I've tried rewriting it as a for loop as such: var existing = $('#existing'); for(var i = 0;i < existing.length;i++) { console.log(existing[i].attr('id')); } Its throwing an error saying: Uncaught TypeError: Object #<HTMLDivElement> has no method 'attr' Thanks.

  Read the article

• Limiting game loop to exactly 60 tics per second (Android / Java)

  - by user22241

  So I'm having terrible problems with stuttering sprites. My rendering and logic takes less than a game tic (16.6667ms) However, although my game loop runs most of the time at 60 ticks per second, it sometimes goes up to 61 - when this happens, the sprites stutter. Currently, my variables used are: //Game updates per second final int ticksPerSecond = 60; //Amount of time each update should take final int skipTicks = (1000 / ticksPerSecond); This is my current game loop @Override public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub //This method will run continuously //You should call both 'render' and 'update' methods from here //Set curTime initial value if '0' //Set/Re-set loop back to 0 to start counting again loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip){ SceneManager.getInstance().getCurrentScene().updateLogic(); //Time correction to compensate for the missing .6667ms when using int values nextGameTick+=skipTicks; timeCorrection += (1000d/ticksPerSecond) % 1; nextGameTick+=timeCorrection; timeCorrection %=1; //Increase loops loops++; } render(); } I realise that my skipTicks is an int and therefore will come out as 16 rather that 16.6667 However, I tried changing it (and ticksPerSecond) to Longs but got the same problem). I also tried to change the timer used to Nanotime and skiptics to 1000000000/ticksPerSecond, but everything just ran at about 300 ticks per seconds. All I'm attempting to do is to limit my game loop to 60 - what is the best way to guarantee that my game updates never happen at more than 60 times a second? Please note, I do realise that very very old devices might not be able to handle 60 although I really don't expect this to happen - I've tested it on the lowest device I have and it easily achieves 60 tics. So I'm not worried about a device not being able to handle the 60 ticks per second, but rather need to limit it - any help would be appreciated.

  Read the article

• Turn-based Strategy Loop

  - by Djentleman

  I'm working on a strategy game. It's turn-based and card-based (think Dominion-style), done in a client, with eventual AI in the works. I've already implemented almost all of the game logic (methods for calculations and suchlike) and I'm starting to work on the actual game loop. What is the "best" way to implement a game loop in such a game? Should I use a simple "while gameActive" loop that keeps running until gameActive is False, with sections that wait for player input? Or should it be managed through the UI with player actions determining what happens and when? Any help is appreciated. I'm doing it in Python (for now at least) to get my Python skills up a bit, although the language shouldn't matter for this question.

  Read the article

• Recommended main loop style

  - by Frootmig-H

  I've just begun attempting an FPS with JMonkeyEngine, but I'm currently stuck as to the best way to implement the main loop - especially with regards to non-instantaneous user actions. By that, I mean things like reloading a weapon. The user starts the action, and it continues for a while with an animation and some sound, and when it completes, game state updates. (I should mention that it's not technically a loop, it's an update method, called as often as possible. Is that different? Me no understand terminology). So, far I've considered : Animation driven Player presses reload Start reload animation If user stars another action, abort animation, start new action. When the animation_complete event is received (JMonkeyEngine provides this), update ammo counters. Event driven Player presses reload Start reload animation Queue up a out-of-thread method to be called at time t + (duration of reload animation) If user starts another action, cancel both animation and queued method. When queued method executes, update ammo. This avoids relying on the animation event (JMonkeyEngine has a particular quirk), but brings in the possibility of thread problems. 'Blocking' (not sure of the correct term) Player presses reload Start reloading animation reloading = true reloadedStartTime = now while (reloading && ((now - reloadingStartTime) < reloadingDuration)) { If user starts another action, break and cancel reloading. } Update ammo counters reloading = false My main concern is that actions can interrupt each other. Reloading can be interrupted by firing, or by dropping or changing weapon, crouching can be interrupted by running, etc. What's the recommended way to handle this? What are the advantages and disadvantages of each method? I'm leaning towards event-driven, even though it requires more care; failing that, blocking.

  Read the article

• How to add more /dev/loop* devices on Fedora 19

  - by user219372

  How to add more /dev/loop* devices on Fedora 19? I do: # uname -r 3.11.2-201.fc19.x86_64 # lsmod |grep loop # ls /dev/loop* /dev/loop0 /dev/loop1 /dev/loop2 /dev/loop3 /dev/loop4 /dev/loop5 /dev/loop6 /dev/loop7 /dev/loop-control # modprobe loop max_loop=128 # ls /dev/loop* /dev/loop0 /dev/loop1 /dev/loop2 /dev/loop3 /dev/loop4 /dev/loop5 /dev/loop6 /dev/loop7 /dev/loop-control So nothing changes.

  Read the article

• Event sourcing: Write event before or after updating the model

  - by Magnus

  I'm reasoning about event sourcing and often I arrive at a chicken and egg problem. Would be grateful for some hints on how to reason around this. If I execute all I/O-bound processing async (ie writing to the event log) then how do I handle, or sometimes even detect, failures? I'm using Akka Actors so processing is sequential for each event/message. I do not have any database at this time, instead I would persist all the events in an event log and then keep an aggregated state of all the events in a model stored in memory. Queries are all against this model, you can consider it to be a cache. Example Creating a new user: Validate that the user does not exist in model Persist event to journal Update model (in memory) If step 3 breaks I still have persisted my event so I can replay it at a later date. If step 2 breaks I can handle that as well gracefully. This is fine, but since step 2 is I/O-bound I figured that I should do I/O in a separate actor to free up the first actor for queries: Updating a user while allowing queries (A0 = Front end/GUI actor, A1 = Processor Actor, A2 = IO-actor, E = event bus). (A0-E-A1) Event is published to update user 'U1'. Validate that the user 'U1' exists in model (A1-A2) Persist event to journal (separate actor) (A0-E-A1-A0) Query for user 'U1' profile (A2-A1) Event is now persisted continue to update model (A0-E-A1-A0) Query for user 'U1' profile (now returns fresh data) This is appealing since queries can be processed while I/O-is churning along at it's own pace. But now I can cause myself all kinds of problems where I could have two incompatible commands (delete and then update) be persisted to the event log and crash on me when replayed up at a later date, since I do the validation before persisting the event and then update the model. My aim is to have a simple reasoning around my model (since Actor processes messages sequentially single threaded) but not be waiting for I/O-bound updates when Querying. I get the feeling I'm modeling a database which in itself is might be a problem. If things are unclear please write a comment.

  Read the article

• Trying to create an infinite for loop that can stop using function doIt()

  - by JoeOzz

  Hey guys, I'm new to javascript and I'm doing a project for my final in class. I need to make it so this game engine I manipulated causes the generation button to go for an infinite loop. I also need to stop it using (Reset==1). Any help? Here's the code I have so far if that helps: function generation() { for(y2=0; y2<2500; y2++) { tempmapactual[y2]=mapactual[y2]; } for (g=0;g<2500;g++) { neighbours=0; for (h=0;h<8;h++) { if (g+coords[h]>0 && g+coords[h]<2499 && mapactual[g+coords[h]]=="white.gif") {neighbours=neighbours+1;} } if (neighbours>=4 || neighbours==1 || neighbours==0) {tempmapactual[g]="black.gif";} if (neighbours==3) {tempmapactual[g]="white.gif";} } for(y3=0; y3<2500; ++y3) { if (mapactual[y3]!=tempmapactual[y3]) { mapactual[y3]=tempmapactual[y3]; document.images[y3+offset].src=mapactual[y3]; } } } </script> <script> function doIt() { for (i=0; i<X; i++) { // This is where I have trouble. What part of generation() do I call? } if (Reset==1) break; // This will kill the loop instantly. } } </script> <script> window.onload(doIt($(X).value))); </script> <form> <input type="button" value="generate" onClick="generation();"> </form> <form> <input type="text"> </form> <form> <input type="button" value="Infinite Loop!" onclick="doIt();"> </form> <form> <input type="button" value="Reset" onclick="doIt();"> </form>

  Read the article

• Backward compatibility with event-sourcing

  - by Tomas Jansson

  How do you stay backward compatible with event-sourcing? Let say you release a version that has one kind of event, let call it X. You know how to handle that event in all the systems that extracts the events from the event source. In a later release you make a change to event X or delete it, how do you stay backward compatible with that? To have a fully functional system you need to be able to handle the old event as the same time as you need to handle the updated version. Or if you delete that event type, then you will be stuck with code that is only there to handle legacy events which in my head can be a little bit messy in the long run.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >