Search Results

Search found 26410 results on 1057 pages for 'firmware development'.

Page 1/1057 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 with 2.6.39 kernel

  - by Dean Thomson

  I've been getting an issue since upgrading to 2.6.39 in Natty from the Kernel-PPA repository. When I do a sudo update-initramfs -u I get the following error message. update-initramfs: Generating /boot/initrd.img-2.6.39-0-generic-pae W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169 I did notice that firmware wasn't in the allocated directory. Does anyone know where to get the firmware files for this.

  Read the article

• Loading latest firmware iwlwifi-6000

  - by grzeh

  I just installed 11.10 on Dell XPS 15z. Somebody know why kernel does not load the latest firmware for wifi Intel Centrino Advanced-N 6230. $ modinfo iwlagn |grep iwlwifi-6000 firmware: iwlwifi-6000g2b-5.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6000-4.ucode In package linux-firmware there is latest version (iwlwifi-6000g2b-6.ucode) $ dpkg -L linux-firmware | grep iwlwifi-6000 /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-6000g2b-5.ucode **/lib/firmware/iwlwifi-6000g2b-6.ucode**

  Read the article

• BCM4306, b43 legacy driver installed, but "firmware missing" error

  - by ScrollerBlaster

  I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

  Read the article

• Installer says I'd need a wireless firmware, but WLAN works without it out of the box

  - by unor

  While installing 12.04.01 (Alternate) on a netbook (Samsung N150Plus), Ubuntu informed me that I'd need the firmware brcm/bcm43xx-0.fw. I skipped this step. If I understand this page correctly, the mentioned firmware is a WLAN driver. However, after the Ubuntu installation was completed, the WLAN worked out of the box. After a few minutes, Ubuntu informed me that there is a firmware update available, which would be the mentioned firmware. Do I need to install this? Is Ubuntu using some kind of "lite" WLAN driver and I might run into problems with certain networks in the future, if I don't use the firmware? Would there be benefits in using the firmware? (maybe longer runtime because of lower consumption?)

  Read the article

• C# development with Mono and MonoDevelop

  - by developerit

  In the past two years, I have been developing .NET from my MacBook by running Windows XP into VM Ware and more recently into Virtual Box from OS X. This way, I could install Visual Studio and be able to work seamlessly. But, this way of working has a major down side: it kills the battery of my laptop… I can easiely last for 3 hours if I stay in OS X, but can only last 45 min when XP is running. Recently, I gave MonoDevelop a try for developing Developer IT‘s tools and web site. While being way less complete then Visual Studio, it provides essentials tools when it comes to developping software. It works well with solutions and projects files created from Visual Studio, it has Intellisence (word completion), it can compile your code and can even target your .NET app to linux or unix. This tools can save me a lot of time and batteries! Although I could not only work with MonoDevelop, I find it way better than a simple text editor like Smultron. Thanks to Novell, we can now bring Microsoft technology to OS X.

  Read the article

• Shared Development Space

  - by PatrickWalker

  Currently the company I work in gives each developer their own development virtual machine. On this machine (Windows 7) they install the entire stack of the product (minus database) this stack is normally spread amongst multiple machines of differing OS (although moving towards windows 2008 and 2008r2) So when a developer has a new project they are likely to be updating only a small piece of their stack and as such the rest of it can become out of date with the latest production code. The isolation from others means some issues won't be found until the code goes into shared test environments/production. I'm suggesting a move from functional testing on these isolated machines to plugging machines into a shared environment. The goal being to move towards a deployment thats closer to production in mechanism and server type. Developers would still make code changes on their Win7 vm and run unit/component testing locally but for functionally testing they would leverage a shared enviornment. Does anyone else use a shared development environment like this? Are there many reasons against this sort of sandbox environment? The biggest drawback is a move away from only checking in code when you've done local functional testing to checking in after static testing. I'm hoping an intelligent git branching strategy can take care of this for us.

  Read the article

• E: unable to locate package firmware-b43-installer when i

  - by Raju

  I am using Acer aspire-5002wlmi laptop and set up a dual boot with Windows XP and Ubuntu 12.04. Wifi is well working in XP but when I start Ubuntu I will get the below error. [ 95.514855] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all the instruction on this website. then I followed the instructions from the below link file:///C:/Documents%20and%20Settings/MGL/Desktop/how%20to%20install%20ubuntu/Ubuntu%2012.04%20Splash%20Screen%20Lockup%20with%20LiveCD%20_%20Ben%20Rousch%27s%20Cluster%20of%20Bleep.htm but I am stuck in installing the Broadcom Wifi firmware in terminal and it is showing this error: E: unable to locate package firmware-b43-installer

  Read the article

• How to do firmware updates/upgrades to a Blackberry

  - by Luis Alvarado

  I have several clients/friends that have Blackberry and wish to update their phone but without installing Windows. Any windows. Just doing it from Ubuntu. How can this be done. The update the mention is for the firmware and new programs for the phone. I do not know much about Blackberries since am more of an android guy. At the end they want support for upgrade/update the Blackberry from within Linux and sync it to the PC (Backups, upload/download stuff to and from it). I have seen 2 types of projects working on this: Linberry (From Venezuela ;) ) - http://linberry.webcindario.com/ Barry - http://www.netdirect.ca/software/packages/barry but so far neither offers updating the firmware or downloading updates. Are there any Ubuntu blackberry projects I am not aware of.

  Read the article

• Enable wifi on my computer - firmware missing

  - by Sarah

  I am attempting to set up a wireless network on 11.04, freshly download today. The router is on and working. However, I do not have a wifi "card" (which I am assuming is a little USB-type thing that allows internet access, but correct me if I am wrong) and every time I try to type in the MAC address and everything, nothing works. I also get the "firmware missing" error when I scroll over the signal strength, which I have tried looking up but have been unsuccessful with completely understanding it. I guess my main question is do I need another little device to be able to use wifi on my ubuntu? I do have an ethernet cable but another person is using it and I do not want to be tied down to that cable. the problem is that none of the wireless networks show up, however they show up when I go into Windows mode on my laptop. I get an error message at the top saying "firmware missing" which I have tried looking up but still have no straight answer for.

  Read the article

• broadcom BCM4318 firmware missing

  - by Lucas

  I tried sudo apt-get update && apt-cache search b43 sudo apt-get install firmware-b43-installer after that i get this error Can't update, Some index files failed to download i tried cd /var/lib/apt/lists/partial sudo rm gb.archive.ubuntu.com_ubuntu_dists_natty_multivers e_source_Sources OR sudo rm /var/lib/apt/lists/partial/gb.archive.ubuntu.com_ubuntu_dists_natty_multivers e_source_Sources another error cannot remove e_source_Sources

  Read the article

• Web application development over C++ development..

  - by learnerforever

  Hi, I am CS undergrad and CS grad. In college I used to program in C/C++/java and have pretty much stuck to the same skill set in industry with 3 years experience. I like thinking,reading,applying logic etc, designing data structures, but I have little patience with debugging large C++ code. And having to deal with low level stuff like memory fault,memory corruption,compilation/linking issues. My confidence in programming is getting down due to this, but I like being in technical field. Does web application development like LAMP suit (Linux,apache,mysql,php),CSS,scripting (AMONG OTHER WEB DEVELOPMENT RELATED SKILLS) etc need lesser patience with debugging,and understanding of low level stuff, but your analysis/logical skills also get used? Also opportunities in web application development look more. Things like scalability, most of the stuff that Google does fascinates me, but for patience needed for dealing with C++ debugging. I make blunders while coding. How does the field look like outside C++? I am beginning to wonder if as a female, by moving to web application development, I can better manage work life balance. I have seen relatively lesser females in C++ than in Java/.net. Not very sure about web related stuff though. Also, what are the other hot technologies being used in web application development? lamp,css is something I know vaguely. Not in touch with keywords going on in this area. Please help!!.

  Read the article

• Mobile Development- Obtaining development hardware - best practices?

  - by Zoot

  I'm looking to get into smartphone development, but there a quite a few options out there for platforms right now. (iOS/Android/WebOS/Bada/Symbian/MeeGo/WindowsMobile/JavaME) I'd like to have development hardware to test my code and the overall functionality of the devices. What is the best way to obtain and/or borrow hardware for development and testing? Are there rules of thumb to follow which apply to all companies and platforms? In this situation, I'm a single developer. Does this process change for a startup? A hackerspace? A small business? A large business? Thanks.

  Read the article

• WRTU54G-TM router with 3rd party firmware; Can custom firmware include stock binary portions?

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly? Update I have found someone working on 3rd party WRTU54G-TM firmware. I am still interested in my second part of the questions, that is can't the stock firmware images be pulled apart and have the close-source, if any, binary kernel modules moved into another more flexible custom firmware?

  Read the article

• WRTU54G-TM router with 3rd party firmware; Can custom firmware include stock binary portions?

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly? Update I have found someone working on 3rd party WRTU54G-TM firmware. I am still interested in my second part of the questions, that is can't the stock firmware images be pulled apart and have the close-source, if any, binary kernel modules moved into another more flexible custom firmware?

  Read the article

• fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

  - by Late

  Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

  Read the article

• NIC firmware version on my DL380 G5

  - by ToastMan

  Hi all, I am trying to figure out what is my current NIC firmware version. If I run the latest firmware upgrade from HP, I get the following: It doesn't tell me the current version. If I try to check it from Device Manager, I get this: That's the driver version, not the hardware firmware version. If I reboot the computer, I don't see the NIC firmware during the POST.. How would I go about finding the current firmware version... Thanks a lot! Toast

  Read the article

• Trade-offs of local vs remote development workflows for a web development team

  - by lamp_scaler

  We currently have SVN setup on a remote development server. Developers SSH into the server and develops on their sandbox environment on the server. Each one has a virtual host pointed to their sandbox so they can preview their changes via the web browser by connecting to developer-sandbox1.domain.com. This has worked well so far because the team is small and everyone uses computers with varying specs and OSs. I've heard some web shops are using a workflow that has the developers work off of a VM on their local machine and then finally push changes to the remote server that hosts SVN. The downside to this is that everyone will need to make sure their machine is powerful enough to run both the VM and all their development tools. This would also mean creating images that mirror the server environment (we use CentOS) and have them install it into their VMs. And this would mean creating new images every time there is an update to the server environment. What are some other trade-offs? Ultimately, why did you choose one workflow over the other?

  Read the article

• Web versus desktop development - is web development worse?

  - by Josh Kelley

  As a longtime desktop developer looking at doing our first large-scale web application, what are the pros and cons of doing web development? Is developing a web application much worse than developing a desktop app? E.g., is it more tedious or annoying? Is the time to market much worse? Is the web platform excessively limiting? If the answer to any of these is yes, then why? (And how does developing a Flash or Silverlight app compare?)

  Read the article

• Business/Development Liaison Wanting To Enhance Understanding In Programming

  - by James Alexander

  I lead software development for a team of of about 20 devs and we're primarily a .net/sql server shop. We've recently created a new role in our organization for a more business like role to assist in prioritization of development and this business liaison has asked me if there are any books or resources he could use to better understand software concepts in a meaningful way. Any suggestions or advice would be greatly appreciated.

  Read the article

• Wireless cuts out on Toshiba Satellite S7208

  - by alecRN

  I recently got a Toshiba Satellite L875-S7208 with Windows 7 preinstalled. I installed Ubuntu 12.04 LTS dual boot to the same Windows partition. However, usually 15 minutes or less after booting, the wifi connection dies. Here's some hopefully relevant information: lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Toshiba America Info Systems Device [1179:fb40] Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb40] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 3 [8086:1e14] (rev c4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) Subsystem: Toshiba America Info Systems Device [1179:fb41] Kernel modules: i2c-i801 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8211] Kernel driver in use: rtl8192ce Kernel modules: rtl8192ce 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Subsystem: Toshiba America Info Systems Device [1179:fb37] Kernel driver in use: r8169 Kernel modules: r8169 lsmod Module Size Used by snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224066 1 joydev 17693 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 arc4 12529 2 snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 87692 0 serio_raw 13211 0 rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device sparse_keymap 13890 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev mac_hid 13253 0 mei 41616 0 wmi 19256 0 soundcore 15091 1 snd i915 472941 3 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 cfg80211 205544 2 rtlwifi,mac80211 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 ums_realtek 18248 0 uas 18180 0 usb_storage 49198 1 ums_realtek dmesg | grep firmware [ 15.692951] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 16.240881] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 452.419288] rtl8192c_common:rtl92c_firmware_selfreset(): 8051 reset fail. [ 458.572211] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 465.440640] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 472.337617] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 479.175471] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 485.978582] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 492.764893] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 499.579348] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 506.386934] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 513.209545] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 519.991365] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 526.778375] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 533.629695] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 540.426004] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 547.238125] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 554.024434] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 560.854794] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 567.678160] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 574.494666] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 581.336653] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 588.157710] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 595.221122] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 602.047429] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 608.829534] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 615.639079] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 622.454991] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 629.273231] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 636.056613] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 642.858096] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 649.640753] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 657.184094] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 664.008018] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 670.838639] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 677.675418] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 684.507255] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 691.310994] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 698.095325] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 704.914509] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 711.725178] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin uname -r 3.2.0-29-generic ifconfig eth0 Link encap:Ethernet HWaddr 4c:72:b9:59:6c:61 inet addr:192.168.0.11 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe59:6c61/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4447 errors:0 dropped:0 overruns:0 frame:0 TX packets:2762 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3671147 (3.6 MB) TX bytes:335133 (335.1 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:515 errors:0 dropped:0 overruns:0 frame:0 TX packets:515 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:83153 (83.1 KB) TX bytes:83153 (83.1 KB) wlan0 Link encap:Ethernet HWaddr 74:e5:43:32:47:95 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32958 (32.9 KB) TX bytes:10431 (10.4 KB)

  Read the article

• Cisco Linksys SLM2024/2048 firmware update

  - by pplrppl

  The initial firmware is 1.0.1 the new firmware is 2.0.0.8 http://www.cisco.com/en/US/docs/switches/lan/csbss/slm2024/release/notes/SLM2024-SLM2048_Release_Note.pdf Release notes say "Supports new GUI Style" and mention the default user name and pw. Does anyone have any experience with the new firmware? Is it Better, Worse, or totally cosmetic with no functional change?

  Read the article

• WRTU54G-TM T-Mobile@Home router with 3rd party firmware

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly?

  Read the article

• How can I edit/tweak Tomato firmware?

  - by HardwareMuch

  How do other people tweak or edit Tomato firmware? I'm interested in this because I do not need QoS. I have another router that does not have as much RAM and I want to have a micro Tomato firmware. I know there is DD-WRT micro but I like Tomato much more. What programming language is used in making Tomato firmware?

  Read the article

• On boot firmware request for intel GMA 3100 chipset timing out

  - by Yannick M.

  I am currently in the process of installing a Gentoo linux box with a Vanilla 2.6.29-r5 kernel with gentoo-xen-kernel patches in order to run the Xen Hypervisor. After rebooting with the new kernel, the booting process seemed to hang on: [ 0.863005] platform microcode: firmware: requesting intel-ucode/06-0f-07 [ 60.863442] Microcode Update Driver: v2.00-xen <[email protected]>, Peter Oruba Apparently the firmware request times out after 60 seconds (/sys/class/firmware/timeout) and booting just continues. I have done some research and have found that on RHEL-4 this problem was related to the mount of /sys changed and the firmware.agent hotplug script couldn't parse the line correctly. However I am having some difficulty tracking down how to fix this on Gentoo. Any and all ideas are greatly appreciated! Thanks

  Read the article

• Should I upgrade my LinkSys WRT54GL firmware?

  - by Reid

  I have a LinkSys WRT54GL v1.1 which currently has stock firmware version 4.30.7. I see that version 4.30.14 is available. The router works fine now, and the release notes look uninteresting except for one line in v4.30.9: "Resolves issue with Linux kernel vulnerability". I have remote management turned off. I'm aware of the 3rd-party firmwares but the stock firmware works fine for me at the moment, so I don't have an interest in those. Is the status quo fine or should I upgrade the firmware? (It's a bit of a pain since the config has to be saved and reloaded, and obviously any mucking with firmware is risky.)

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >