Search Results

Search found 26410 results on 1057 pages for 'firmware development'.

Page 2/1057 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• update ocz vertex le capacity via firmware update

  - by Ben Voigt

  I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

  Read the article

• LaserJet M1522nF firmware was corrupted during the update

  - by AAA-Super

  I have a LaserJet M1522nF, and the problem when I working on is that it is freezing every time so I decide to update the firmware. During the updating the device was down because of electricity so I turned it on again and there is a message on the small screen saing HEWLETT-PACKARD After nothing appeared on screen the device seems to be blocked or the firmware was corrupted. Now, how can I reset the update of firmware or how can I reinstall it?

  Read the article

• Going into Web Development without a C.S. Degree - Suggestions

  - by Klaint Cokeman

  I plan on seeking a career in web development and I'm about two semesters away from graduating with a CIS degree. Although I'm very satisfied with my choice of degree, I'm concerned that I may be lacking knowledge in a few areas because of not majoring in computer science. The programming side of things is no problem for me, I'm just wondering to what extent data structures/theory/etc. might benefit me to learn over spending more time with hands-on programming... and also what aspects of C.S. would be most appropriate to look into you would think would be most applicable to web development. In short, I'd like to expand my horizons a little bit. I'd very much appreciate and advice/suggestions/book or tutorial recommendations, etc. Thanks.

  Read the article

• Web development starting a career [closed]

  - by user985482

  Hi I am in the 3rd and last year at college of informatics and I am interested to follow a career in web development when I finish(2 more months). From what I understand this days to get hired you need to be able to know a variety of technologies at least that is the case in Romania.Most of the jobs I have seen even at entry level asks you to know the following: HTML/CSS Javascript , a framework preferable jQuery , Ajax a server side language in my case PHP and a framework SQL and an RDBMS in my case MySql a CMS in my case Wordpress My question is how well should me or anyone looking to get hired as a web developer for there first job should we know this technologies in order to get hired and what else should we aim to learn to have a better chance of getting hired. I don't know if the question is right for this forum but I believe that this could help many of the students and anyone who is taking an interest in web development to know what they should expect from there employers when they try to find work.

  Read the article

• Drivers and firmware for the LiteOn ihap-122-9 DVD drive

  - by Sandy

  I'm trying to replace the DVD drive in my old PC. LiteOn.com is a mess and I can't find a single working driver or firmware update there, or anywhere. Windows XP tries to use a default, generic driver dated 2001. (About 9 years before this drive even existed.) http://www.firmwarehq.com/download_1..._6L0H.EXE.html This correctly finds my LiteOn ihap-122-9 DVD Drive. It correctly finds that I'm currently using firmware 6L0F. It correctly tries to install 6L0H. It completes 100% but then just fails and says "contact your vendor". Does anyone know why? Where can I actually get drivers... and firmware updates... that actually work for the ihap-122-9? Apparently, the newest driver IS the 1 made 9 years before the drive existed. (Unbelievable.) And the latest firmware is the 1 that is already in the drive. (Common.) No other drive I've had in this computer ever had a problem. This brand new LiteOn is doing this: Opening MY COMPUTER now takes 60 seconds. MY COMPUTER marking the drive as "DVD F:" takes another 30 seconds. MY COMPUTER showing "Batman II" title takes another 15 seconds. Clicking and running the movie will take another 30 seconds for the main-menu to appear. The movie starts about 20 seconds later. The movie runs fine for 1-2 seconds... then stops for 5 seconds.... then starts again and plays for 1-2 seconds. Repeats for 2 hours. (It happens with all store-bought DVDs and all home-made DVDs.)

  Read the article

• Recommendation for a platform to teach game development to kids [closed]

  - by Moshe Kravchik

  My 11 years old son decided he want to create a Web game. He does not know much about programming and I never did any game development so I'm not the best teacher of the topic. On one hand I really want him to get into building things and doing his own game sounds perfect. So I'd like to find a way to keep him interested and progressing by himself. This means that I'm looking for a platform that is: 1. Simple for understanding and use, intuitive interface 2. Powerful 3. Good tools, preferrably free 4. Significant community for questions and tips 5. Localization - my son's English is quite poor (native Hebrew). We looked at Alice, but it was too limited in its abilities and isn't really a Web game building platform. HTML/CSS and Javascript - too low level for a kid to keep the interest. What would you recommend?

  Read the article

• How to change the firmware of my NETGEAR WGT624 v2 to DD-WRT

  - by Lirik

  In reference to my previous question: I can't find the appropriate firmware for my NETGEAR WGT624 v2 router. I went on the dd-wrt web site and I read the wiki, but I didn't see any files or instructions on how to change the firmware. The router database lists my router, but as I said: no files. In addition the "Supported" column lists "wip", what is wip? Router Database 4 routers found Manufacturer Model Revision Supported Activation required Netgear WGT624 v1 wip no Netgear WGT624 v2 wip no ... The only thing listed for my router on the dd-wrt web site is: Router details Chipset: AR2312A RAM: 16 MB FLASH: 4 MB Additional information * OpenWRT Wiki: Netgear WGT624 * Unbrick procedure Is the router supported? Can I change the firmware? If yes, then how can I change it?

  Read the article

• MacBook (late 2008) EFI Firmware Update 1.8 Problem

  - by user20832

  Last night I applied EFI Firmware update 1.8 to my Macbook (late 2008). After installing EFI Firmware Update and rebooted my computer and installed SuperDrive Firmware Update 3.0. After that my Macbook rebooted and a black screen is showing with "No bootable device. Please insert bootable device and press any key to continue". I put in one of the bootable installation disck (MAC OS) and it's still stuck on the same screen. I have also tried restarting my macbook manually but no luck. Have anyone experienced that?

  Read the article

• Development processes, the use of version control, and unit-testing

  - by ct01

  Preface I've worked at quite a few "flat" organizations in my time. Most of the version control policy/process has been "only commit after it's been tested". We were constantly committing at each place to "trunk" (cvs/svn). The same was true with unit-testing - it's always been a "we need to do this" mentality but it never really materializes in a substantive form b/c there is no institutional knowledge base to do it - no mentorship. Version Control The emphasis for version control management at one place was a very strict protocol for commit messages (format & content). The other places let employees just do "whatever". The branching, tagging, committing, rolling back, and merging aspect of things was always ill defined and almost never used. This sort of seems to leave the version control system in the position of being a fancy file-storage mechanism with a meta-data component that never really gets accessed/utilized. (The same was true for unit testing and committing code to the source tree) Unit tests It seems there's a prevailing "we must/should do this" mentality in most places I've worked. As a policy or standard operating procedure it never gets implemented because there seems to be a very ill-defined understanding about what that means, what is going to be tested, and how to do it. Summary It seems most places I've been to think version control and unit testing is "important" b/c the trendy trade journals say it is but, if there's very little mentorship to use these tools or any real business policies, then the full power of version control/unit testing is never really expressed. So grunts, like myself, never really have a complete understanding of the point beyond that "it's a good thing" and "we should do it". Question I was wondering if there are blogs, books, white-papers, or online journals about what one could call the business process or "standard operating procedures" or uses cases for version control and unit testing? I want to know more than the trade journals tell me and get serious about doing these things. PS: @Henrik Hansen had a great comment about the lack of definition for the question. I'm not interested in a specific unit-testing/versioning product or methodology (like, XP) - my interest is more about work-flow at the individual team/developer level than evangelism. This is more-or-less a by product of the management situation I've operated under more than a lack of reading software engineering books or magazines about development processes. A lot of what I've seen/read is more marketing oriented material than any specifically enumerated description of "well, this is how our shop operates".

  Read the article

• ZTE ZXDSL 831 Series firmware update

  - by Eugenio Miró

  Hi everybody! I'm having a problem with my broadband connection established through a ZTE ZXDSL 831 Series DSL modem and wandered if a firmware update could help me fix that. The networking problem is not important at this point but my question is where to find this modem firmware updates because ZTE does not provide the bits. Does anyone know where I can find it? Thanks in advance!

  Read the article

• Unpacking a ZTE ZXV10 H108L router firmware

  - by v3ng3ful

  I binwalked a firmware of a ZTE ZXV10 H108L, and got some encouraging results of uImage uboot, and LZMA compression, as well as a Squashfs 3.0 LZMA compressed filesystem. 256 0x100 uImage header, header size: 64 bytes, header CRC: 0xE70BCBB9, created: Thu Nov 10 04:54:54 2011, image size: 804172 bytes, Data Address: 0x80002000, Entry Point: 0x80266000, data CRC: 0x6EFE90F1, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name: MIPS Linux-2.6.20 320 0x140 LZMA compressed data, properties: 0x5D, dictionary size: 8388608 bytes, uncompressed size: 2637958 bytes 851968 0xD0000 Squashfs filesystem, big endian, lzma signature, version 3.0, size: 2543403 bytes, 632 inodes, blocksize: 65536 bytes, created: Thu Nov 10 04:56:12 2011 Now what I did is, to test several portions of the file (320byte-end, 851968byte-end, and many more) using dd, and trying with certain tools to uncompress/unpack the filesystem of the firmware. After some digging I found out the best tool to do this is the firmware_mod_kit, that understands a squashfs-lzma v3 filesystem. Although I ended up really frustrated as unsquashfs-lzma v3 reported a cold "zlib::uncompress failed, unknown error -3". Do you have any ideas? Could it be that, the firmware is corrupted on purpose to discourage attempts like this? Router file Thanks

  Read the article

• Recommended open-source firmware for ASUS RT-N16

  - by MasterF

  I have recently acquired an ASUS RT-N16 router. My original plan for it was to install Tomato on it. However, after checking their website i found out that the firmware was not updated in the last 2 years. There seem to be a few updated mods but none of them really seemed mature/stable/well-documented. I would like to know what other people recommend as open-source firmware for this router. I know the answers will probably be subjective; so i will give a bit of background on my needs: for now i will only use the Wi-Fi on an Android phone the connection will not be shared with anyone (so QOS is optional) i want a stable (wired) connection on my PC (for online gaming etc.) i want the (wired) download/upload speeds to be as close as possible to those achieved by directly plugging the Ethernet cable to the PC's network card; i have a 100 Mbps connection my ISP uses PPPOE my technical level: i am a software developer and i have good knowledge of bash scripting, but no experience with networking Also, i know that i could probably just use the stock firmware (and maybe will use it for a while), but i'm interested in trying an open-source version (for more features, flexibility, as a learning exercise etc.)

  Read the article

• ssd firmware, linux: updating large batch of drives

  - by wryfi

  I was recently hit with a fatal firmware bug that affected dozens of Crucial SSDs deployed in my datacenter. Many of the affected machines use LSI or other proprietary SAS controllers, which Crucial's bootable ISO does not recognize. None of the affected machines has a Windows license. The story is roughly similar for other SSD mfrs, including Samsung and Intel. To resolve this issue, I was forced to stop each machine, remove the affected SSD, remove the SSD from its hotswap caddy, install it temporarily into my ThinkPad, flash the firmware, reverse, rinse, repeat. It took the better part of a day to get through all the affected devices. I am looking for hardware, software, and/or purchasing strategies to ease this pain, as SSD firmware bugs seem inevitable, and our SSD footprint is growing. My first thought is to get a laptop with eSATA and one of these cables (http://www.newegg.com/Product/Product.aspx?Item=N82E16812311004). That should at least make it so I don't have to remove the drives from their caddies. Surely others have run into this. Any novel solutions?

  Read the article

• Dell XPS 1530 DVD-RW firmware problem

  - by josecortesp

  Hello everyone. I have this XPS laptop since a year and a half ago. About 2 months ago, with the waranty expired, i tried to run the optiarc slot load DVD-RW firmware update, and said everything was okay. Then I restarted it and the problem started: Now, every single time I turn on my computer, it get stuck at the BIOS POST until the drive sounds like "ready" and then the computer starts normally. And this happen EXACTLY the same when it's getting back from sleep. I'm pretty sure is not a software issue, because I tried with Vista Home Premiun 32 bits, Ubuntu (from 8.10+)32 & 64, and with W7 64. Already tried to run the firmware installer like a million time, in case it is a failing install with no luck. Also, google it to see if someone has the same problem, and again, no. The Drive performs pretty okay once the System is on, but waiting to the drive to be ready everytime is really annoying. The Firmware I updated was this, and the drive is: K937C Assembly, Dvd+/-rw, 8, SLOT, 1530 Sony Nec Optiarc Inc. I'll apreciate any help you can give me

  Read the article

• Technical development decision for my newly established software company

  - by test test

  I have a new software company where I am planning to develop CRM system. So I have settled down on the technological approach I am going to use:- I will use an open source Java-based CRM engine. I will use a third party reporting tool named JasperReports for providing reports capabilities for the CRM. I will develop the interface and any customization which the customer might ask for using asp.net mvc framework since my knowledge and experience are based on asp.net. And I will use the CRM API to integrate my asp.net web application with the Java-based CRM. I have developed a simple demo which integrate these three main components (CRM engine, asp.net application and the reporting tool) and they worked well. But I am afraid of the following risk that I might face if I go with the above approach: I should hire developers with different skills and experience: Developers with Java skills to be able to modify the Java-based CRM and writing plug-ins -when needed- to extend the CRM capabilities. Other developers with asp.net skills to be able to build the application such as application forms, the portal from where users will be able to start the CRM processes, searching capabilities, etc. So might the above point raise some risks when I start hiring a new team and start building the CRM application, OR I am on the right track at this early stage?

  Read the article

• How to install and make development use of gtk+ on Ubuntu 12.04

  - by el10780

  I want to install gtk+ in order to make an application with a graphical environment.I went to the official website of gtk(gtk.org) and I tried to follow the instructions,but I wasn't able to make it work.I think that I have successfully managed to do the whole process till the part that I had to run make install and after that ldconfig.So far so good.After that though the complete chaos.I do not know how to set all these configurations so I can make my compilers know where to look for the include files.I just want to make it work in my Ubuntu when I start making a source file and then compile it and run it.

  Read the article

• Getting into driver development for linux [closed]

  - by user1103966

  Right now, I've been learning about writing device-drivers for linux 3.2 kernel for about 2 months. So far I have been able program simple char drivers that only read and write to a fictitious dev structure like a file, but now I'm moving to more advance concepts. The new material I've learned about includes I/O port manipulation, memory management, and interrupts. I feel that I have a basic understanding of overall driver operation but, there is still so much that I don't know. My question is this, given that I have the basic theory of how to write a dev-driver for a piece of hardware ... how long would it take to actually develop the skills of writing actual software that companies would want to employ? I plan on getting involved in an open-source project and building a portfolio. Also what type of beginner drivers could I write for hardware that would best help me develop my skills? I was thinking that taking on a project where I design my own key logger would easy and a good assignment to help me understand how IO ports and interrupts are used. I may want to eventually specialize in writing software for video cards or network devices though these devices seem beyond my understanding at the moment. Thanks for any help

  Read the article

• Development Environment in a VM against an isolated development/test network

  - by bart

  I currently work in an organization that forces all software development to be done inside a VM. This is for a variety of risk/governance/security/compliance reasons. The standard setup is something like: VMWare image given to devs with tools installed VM is customized to suit project/stream needs VM sits in a network & domain that is isolated from the live/production network SCM connectivity is only possible through dev/test network Email and office tools need to be on live network so this means having two separate desktops going at once Heavyweight dev tools in use on VMs so they are very resource hungry Some problems that people complain about are: Development environment runs slower than normal (host OS is windows XP so memory is limited) Switching between DEV machine and Email/Office machine is a pain, simple things like cut and paste are made harder. This is less efficient from a usability perspective. Mouse in particular doesn't seem to work properly using VMWare player or RDP. Need a separate login to Dev/Test network/domain Has anyone seen or worked in other (hopefully better) setups to this that have similar constraints (as mentioned at the top)? In particular are there viable options that would remove the need for running stuff in a VM altogether?

  Read the article

• Snow Leopard 64 bits mode (EFI64 Firmware)

  - by Fred Zelders

  How do I get the EFI64 firmware on my iMac 20" (late 2006) with Intel Core 2 Duo?

  Read the article

• Can't find newer DLINK Router DIR-400 firmware

  - by Junior Mayhé

  If you're here, it means you also have a Dlink 400 router. I asked DLINK but they didn't answer my question. I asked DLINK support again, but this time no answer (2 weeks later). In DLINK FTP site there is no firmware for DIR-400. Past year, Googling around Russia, I found a FIRMWARE_DIR400_v1.02B03.bin. But I am trying to figure out if is there any update, a 1.03 version or superior. Can anyone tell me why DLINK doesn't show this firmware update on their site, and if this DIR-450 is compatible with mine?

  Read the article

• Custom firmware for Asus WL-520g

  - by Jaroslav Záruba

  What custom firmware works with Asus WL-520g? (Note this is not 520gU, 520gC, etc.) I failed to flash it with Tomato (Tomato_1_28_ND.zip) - the admin UI does not accept the file, and when trying to tftp the file as adviced for 520gU all I get is this: Transfering file tomato-ND.trx to server in octet mode... Error occurred during the file transfer (Error code = 0): Error in SendPacket() call. I just saved the router form rather unsuccessful flash to DD-WRT (after few hours the router fell into coma), and I'd like to keep it as a backup should the new one die or whatever. (Unfortunately the stock firmware does not support WOL.)

  Read the article

• tool to find firmware of harddisk

  - by clamp

  hello, does anyone know of a tool that can display the firmware of a harddisk? thanks!

  Read the article

• Various roles in an Organization and their respective tasks.

  - by balu

  In various organizations(Software Company) there would be various designations having different roles. I would like to know the Industry accepted & followed trend in the organization hierarchy(..Like DBA,System Architect,Project Manager,Senior Developer,Developer,QA,Design Team,Delivery Manager etc..).And the various roles played by each of them in the various stages of the Software Development Life Cycle.Who all could possibly be sharing the responsibility mutually?

  Read the article

• Tomato Firmware on Linksys WRT54GS Firmware Version: v1.50.6

  - by ms80

  I'm trying to install Tomato and get "Upgrade Failed". Any idea why it's failing?

  Read the article

• I flashed my DS4700 with a 7 series firmware, now my DS4300 cannot read the disks I moved to that lo

  - by Daniel Hoeving

  In preparation for adding a number of 1Tb SATA disks to our DS4700 I flashed the controller firmware from a 6 series (which only supports up to 2Tb logical drives) to a 7 series (which supports larger than 2Tb logical drives). Attached to this DS4700 was a EXP710 expansion drawer that we had planned to migrate out to our co-location to allieviate the storage issues we were having there. Unfortunately these two projects were planned in isolation to one another so I was at the time unaware of the issue that this would cause. Prior to migrating the drawer I was reading the "IBM TotalStorage DS4000 EXP700 and EXP710 Storage Expansion EnclosuresInstallation, User’s, and Maintenance Guide" and discovered this: Controller firmware 6.xx or earlier has a different metadata (DACstore) data structure than controller firmware 7.xx.xx.xx. Metadata consists of the array and logical drive configuration data. These two metadata data structures are not interchangeable. When powered up and in Optimal state, the storage subsystem with controller firmware level 7.xx.xx.xx can convert the metadata from the drives configured in storage subsystems with controller firmware level 6.xx or earlier to controller firmware level 7.xx.xx.xx metadata data structure. However, the storage subsystem with controller firmware level 6.xx or earlier cannot read the metadata from the drives configured in storage subsystems with controller firmware level 7.xx.xx.xx or later. I had assumed that if I deleted the logical drives and array information on the EXP710 prior to migrating it to the DS4300 (6.60.22 firmware) this would satisfy the above, unfortunately I was wrong. So my question is a) Is it possible to restore the DAC information to its factory settings, b) What tool(s) would I use to accomplish this, or c) is this a lost cause? Daniel.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >