Search Results

Search found 9 results on 1 pages for 'guile'.

Page 1/1 | 1 

  • Problem with circular definition in Scheme

    - by user8472
    I am currently working through SICP using Guile as my primary language for the exercises. I have found a strange behavior while implementing the exercises in chapter 3.5. I have reproduced this behavior using Guile 1.4, Guile 1.8.6 and Guile 1.8.7 on a variety of platforms and am certain it is not specific to my setup. This code works fine (and computes e): (define y (integral (delay dy) 1 0.001)) (define dy (stream-map (lambda (x) x) y)) (stream-ref y 1000) The following code should give an identical result: (define (solve f y0 dt) (define y (integral (delay dy) y0 dt)) (define dy (stream-map f y)) y) (solve (lambda (x) x) 1 0.001) But it yields the error message: standard input:7:14: While evaluating arguments to stream-map in expression (stream-map f y): standard input:7:14: Unbound variable: y ABORT: (unbound-variable) So when embedded in a procedure definition, the (define y ...) does not work, whereas outside the procedure in the global environment at the REPL it works fine. What am I doing wrong here? I can post the auxiliary code (i.e., the definitions of integral, stream-map etc.) if necessary, too. With the exception of the system-dependent code for cons-stream, they are all in the book. My own implementation of cons-stream for Guile is as follows: (define-macro (cons-stream a b) `(cons ,a (delay ,b)))

    Read the article

  • How to parse out base file name using Script-Fu

    - by ongle
    Using Gimp 2.6.6 for MAC OS X (under X11) as downloaded from gimp.org. I'm trying to automate a boring manual process with Script-Fu. I needed to parse the image file name to save off various layers as new files using a suffix on the original file name. My original attempts went like this but failed because (string-search ...) doesn't seem to be available under 2.6 (a change to the scripting engine?). (set! basefilename (substring filename 0 (string-search "." filename))) Then I tried to use this information to parse out the base file name using regex but (re-match-nth ...) is not recognized either. (if (re-match "^(.*)[.]([^.]+)$" filename buffer) (set! basefilename (re-match-nth orig-name buffer 1)) ) And while pulling the value out of the vector ran without error, the resulting value is not considered a string when it is passed into (string-append ...). (if (re-match "^(.*)[.]([^.]+)$" filename buffer) (set! basefilename (vector-ref buffer 1)) ) So I guess my question is, how would I parse out the base file name?

    Read the article

  • What do you look for in a scripting language?

    - by Jon Purdy
    I'm writing a little embedded language for another project. While game development was not its original intent, it's starting to look like a good fit, and I figure I'll develop it in that vein at some point. Without revealing any details (to avoid bias), I'm curious to know: What features do you love in a scripting language for game development? If you've used Lua, Python, or another embedded language such as Tcl or Guile as your primary scripting language in a game project, what aspects did you find the most useful? Language features (lambdas, classes, parallelism) Implementation features (performance optimisations, JIT, hardware acceleration) Integration features (C, C++, or .NET bindings) Or something entirely different?

    Read the article

  • GNU/Linux interactive table content GUI editor?

    - by sdaau
    I often find myself in the need to gather data (say from the internet), into a table, for comparison reasons. I usually need the final table output in HTML or MediaWiki mostly, but often times also Latex. My biggest problem is that I often forget the correct table syntax for these markup languages, as well as what needs to be properly escaped in the inline data, for the table to render correctly. So, I often wish there was a GUI application, which provides a tabular framework - which I could stick "Always on Top" as a desktop window, and I could paste content into specific cells - before finally exporting the table as a code in the correct language. One application that partially allows this is Open/LibreOffice calc: The good thing here is that: I can drag and drop browser content into a specifically targeted table cell (here B2) "Rich" text / HTML code gets pasted For long content, the cell (column) width stays put as it originally was The bad thing is, that: when the cell height (due to content size) becomes larger than the calc window, it becomes nearly impossible to scroll calc contents up and down (at least with the mousewheel), as the view gets reset to top-right corner of the selected cell calc shows an "endless"/unlimited field of cells, so not exactly a "table" - which I find visually very confusing (and cognitively taxing) Can only export table to HTML What I would need is an application that: Allows for a limited size table, but with quick adding of rows and columns (e.g. via corresponding + buttons) Allows for quick setup of row and column height and width (as well as table size) Stays put at those sizes, regardless of size of content pasted in; if cell content overflows, cell scrollbars are shown (cell content could be possibly re-edited in a separate/new window); if table overflows over window size, window scrollbars are shown Exports table in multiple formats (I'd need both HTML and mediawiki), properly escaping cell content for each (possibility to strip HTML tags from content pasted in cells, to get plain text, is a plus) Targeting a specific cell in the table for the content paste operation is a must - it doesn't have to be drag'n'drop though, a right click over a cell with "Paste content" is enough. I'd also want the ability to click in a specific cell and type in (plain text) content immediately. So, my question is: is there an application out there that already does something like this? The reason I'm asking is that - as the screenshots show - for instance Libre/OpenOffice allows it, but only somewhat (as using it for that purpose is tedious). I know there exist some GUI editors for Linux (both for UI like guile or HTML like amaya); but I don't know them enough to pinpoint if any of them would offer this kind of functionality (and at least in my searches, that kind of functionality, if present in diverse software, seems not to be advertised). Note I'm not interested in styling an HTML table, which is why I haven't used "table designer" in the title, but "table editor" (in lack of better terms) - I'm interested in (quickly) adjusting row/column size of the table, and populating it with pasted data (which is possibly HTML) in a GUI; and finally exporting such a table as self-contained HTML (or other) code.

    Read the article

  • Why can't I bind to 127.0.0.1 on Mac OS X?

    - by Noah Lavine
    Hello, I'm trying to set up a simple web server on Mac OS X, and I keep getting an error when I run bind. Here's what I'm running (this transcript uses GNU Guile, but just as a convenient interface to posix). (define addr (inet-aton "127.0.0.1")) ; get internal representation of 127.0.0.1 (define sockaddr (make-socket-address AF_INET addr 8080)) ; make a struct sockaddr (define sock (socket PF_INET SOCK_STREAM 0)) ; make a socket (bind sock sockaddr) ; bind the socket to the address That gives me the error In procedure bind: can't assign requested address. So I tried it again allowing any address. (define anyaddr (make-socket-address AF_INET INADDR_ANY 8080)) ; allow any address (bind sock anyaddr) And that works fine. But it's weird, because ifconfig lo0 says lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 So the loopback device is assigned to 127.0.0.1. So my question is, why can't I bind to that address? Thanks. Update: the output of route get 127.0.0.1 is route to: localhost destination: localhost interface: lo0 flags: <UP,HOST,DONE,LOCAL> recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire 49152 49152 0 0 0 0 16384 0

    Read the article

  • Free and Open Source Software in Oracle Solaris 11.1

    - by user13277799
    Oracle Solaris 11.1 contains number of Free and Open Source packages. The following table contains important FOSS packages with their versions available in this latest Oracle Solaris release. a2ps 4.14 aalib 1.4.0 pmtools 20071116 apache-ant 1.7.1 httpd 2.2.22 mod_dtrace 0.3.1 mod_fcgid 2.3.6 tomcat-connectors 1.2.28 mod_perl 2.0.4 mod_proxy_html 3.1.1 modsecurity-apache 2.5.9 mod_wsgi 3.3 apr 1.3.9 apr-util 1.3.9 areca 7.1 autoconf 2.68 autogen 5.9 automake 1.10 automake 1.11.2 automake 1.9.6 bash 4.1 bcc 0.16.17 beanshell 2.0b4 db 5.1.25 bind 9.6-ESV-R7-P2 binutils 2.21.1 bison 2.3 bzip2 1.0.6 cdrtools 3.00 clisp 2.47 cmake 2.8.6 gnu 0.5.11 conflict 20100627 convmv 1.15 coreutils 8.5 cups 1.4.5 curl 7.21.2 cvs 1.12.13 diffutils 2.8.7 doxygen 1.7.6.1 ejabberd 2.1.8 elinks 0.11.7 emacs 23.4 otp_src R12B-5 fcgi 2.4.0 fetchmail 6.3.22 flex 2.5.35 foomatic-db 20080903 foomatic-db-engine 3.0-20080903 foomatic-filters 4.0.15 foomatic-filters-ppds 20080818 fping 2.4b2_to gawk 3.1.8 gcc 3.4.3 gcc 4.5.2 gd 2.0.35 gdb 6.8 gdbm 1.8.3 gettext 0.16.1 grep 2.10 ghostscript 9.00 git 1.7.9.2 gnu-gs-fonts-other 6.0 gnu-gs-fonts-std 6.0 gmp 4.3.2 gnupg 2.0.17 gnuplot 4.6.0 pth 2.0.7 gocr 0.48 gperf 3.0.3 gpgme 1.1.8 grails 1.0.3 graphviz 2.28.0 tar 1.26 guile 1.8.6 gutenprint 5.2.7 gzip 1.4 hal-cups-utils 0.6.19 hexedit 1.2.12 hplip 3.10.9 httping 1.4.4 hwdata 0.5.11 iftop 0.17 ilmbase 1.0.1 ImageMagick 6.3.4 iperf 2.0.4 ipmitool 1.8.11 ircii 20060725 dhcp 4.1-ESV-R7 junit 4.10 INIT 2011-02-08 lcms 1.19 less 436 lftp 4.3.1 libassuan 2.0.1 confuse 2.6 libedit 20110802-3.0 libee 0.3.2 libestr 0.1.2 libevent 1.4.14b expat 2.1.0 libidn 1.19 libksba 1.1.0 libmcrypt 2.5.8 libmemcached 0.16 libmng 1.0.10 neon 0.29.5 libnet 1.1.5 libpcap 1.1.1 librsync 0.9.7 libsigsegv 2.6 libsndfile 1.0.23 libtecla 1.6.1 libtool 2.4.2 libtorrent 0.12.2 libusbugen 0.1.8 libusb 0.1.8 libxml2 2.7.6 libxslt 1.1.26 lighttpd 1.4.23 links 1.03 logilab-astng 0.19.0 logilab-common 0.40.0 lua 5.1.4 m4 1.4.12 make 3.82 mc 4.7.5.2 meld 1.4.0 memcached 1.4.5 memcached-java 2.0.1 mercurial 2.2.1 mpc 0.9 mpfr 2.4.2 mutt 1.5.21 mysql 5.1.37 ncftp 3.2.3 net-snmp 5.4.1 nethack 3.4.3 nmap 5.51 ntp-dev 4.2.5 open-fabrics 1.5.3 openexr 1.6.1 openldap 2.4.30 openscap 0.8.1 openssl 0.9.8q openssl 1.0.0j libopenusb 1.0.1 p7zip 9.20.1 pam_pkcs11 0.6.0 patch 2.5.9 pconsole 1.0 pcre 8.21 perl 5.12.4 DBI 1.58 Net-SSLeay 1.36 pmtools 1.10 XML-Parser 2.36 XML-Simple 2.18 PHP 5.2.17 PHP 5.3.14 pinentry 0.7.6 privoxy 3.0.17 proftpd 1.3.3 psutils p17 pv 1.2.0 pwgen 2.06 pylint 0.18.0 CherryPy 3.1.2 coverage 3.5 jsonrpclib 0.1.3 ldtp 2.1.1 M2Crypto 0.21.1 Mako 0.4.1 nose 1.1.2 ply 3.1 pybonjour 1.1.1 pycups 1.9.46 pycurl 7.19.0 lxml 2.3.3 pyOpenSSL 0.11 Python 2.6.8 Python 2.7.3 setuptools 0.6 quagga 0.99.19 quilt 0.60 rdiff-backup 1.3.3 readline 5.2 rpm2cpio 0.5.11 rsync 3.0.8 rsyslog 6.2.0 rtorrent 0.8.2 ruby 1.8.7 samba 3.6.6 sane-backends 1.0.19 sane-frontends 1.0.14 screen 4.0.3 sed 4.2.1 sendmail 8.14.5 slang 2.2.4 slib 3b1 slrn 0.9.9 snort 2.8.4.1 sox 14.3.2 spawn-fcgi 1.6.3 squid 3.1.18 stdcxx 4.2.1 subversion 1.7.5 sudo 1.8.4.5 swig 1.3.35 expect 5.45 tcl 8.5.9 tk 8.5.9 tls 1.6 tcpdump 4.1.1 tcsh 6.17.00 texinfo 4.7 tidy 1.0.0 timezone apache-tomcat 6.0.35 top 3.8beta1 trousers 0.3.6 unixODBC 2.3.0 unrar 4.1.4 unzip 6.0 vim 7.3 visual-panels wget 1.12 which 2.16 wireshark 1.8.2 wxGTK 2.8.12 xorriso 0.6.0 xz 5.0.1 zip 3.0 zlib 1.2.3 zsh 4.3.17

    Read the article

  • Updates broke my themes/shell [Ubuntu 12.04 running Gnome 3 ]

    - by APNW
    I am running gnome-session 3.4.2.1. After the latest updates (listed below) my theme regressed to what looks like tango - not sure. Am unable to change it using Gnome-tweak tool or the display settings. I am also unable to change the wallpaper. Here's what it looks like: Synaptic: Chromium and this is the wallpaper page even though I have selected the wallpaper, it actually does not change. This same problem occurred on my personal computer, and one other computer I have, all running the same software/config. The interesting thing is that while Gnome 3 and Unity are affected, Cinnamon is not. What I've done so far: purged and re-installed both gnome 3 and Unity- no change noted. So, how do I fix this? Thanks Here's the installation log: Start-Date: 2013-11-07 12:01:28 Upgrade: chromium-browser-l10n:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libswscale2:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), chromium-codecs-ffmpeg:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), chromium-browser:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libpostproc52:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavcodec-extra-53:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1), libavformat53:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavutil-extra-51:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1) End-Date: 2013-11-07 12:02:00 Start-Date: 2013-11-07 17:32:55 Commandline: aptdaemon role='role-commit-packages' sender=':1.136' Install: libmusicbrainz5-0:i386 (5.0.1-2~precise2), udisks2:i386 (1.98.0-1~precise1), libclutter-gst-1.0-0:i386 (1.5.4-0ubuntu2), libudisks2-0:i386 (1.98.0-1~precise1), cinnamon-session-common:i386 (2.0.4-20131105043005-precise), librhythmbox-core6:i386 (2.97-1ubuntu1~precise1), gcr:i386 (3.4.1-3~precise1), libcluttergesture-0.0.2-0:i386 (0.0.2.1-2ubuntu3), libmx-1.0-2:i386 (1.4.3-0ubuntu1), guile-2.0-libs:i386 (2.0.5+1-1), libclutter-imcontext-0.1-0:i386 (0.1.4-2build1), libnatpmp1:i386 (20110808-3ubuntu1) Upgrade: gnome-keyring:i386 (3.2.2-2ubuntu4.1, 3.4.1-4ubuntu1~precise1), cinnamon:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gir1.2-muffin-3.0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), nemo:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), aisleriot:i386 (3.2.3.2-0ubuntu1, 3.4.1-1~precise1), procps:i386 (3.2.8-11ubuntu6.2, 3.2.8-11ubuntu6.3), libcinnamon-desktop0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), libgck-1-0:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), totem-plugins:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), cinnamon-desktop-data:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), rhythmbox:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libgcr-3-1:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), seahorse:i386 (3.2.2-0ubuntu2.1, 3.4.1-2~precise1), muffin-common:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), totem-common:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), libtotem0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-data:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gir1.2-cinnamondesktop-3.0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), cinnamon-session:i386 (2.0.1-20131021043004-precise, 2.0.4-20131105043005-precise), rhythmbox-mozilla:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), rhythmbox-plugin-zeitgeist:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libmuffin0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), cjs:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), rhythmbox-plugin-cdrecorder:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), cinnamon-common:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gnome-disk-utility:i386 (3.0.2-2ubuntu7, 3.4.1-0ubuntu1~precise1), nemo-fileroller:i386 (2.0.0-20131021020004-precise, 2.0.0-20131105020003-precise), libnemo-extension1:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), rhythmbox-plugins:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gimp:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), cinnamon-settings-daemon:i386 (2.0.5-20131026004504-precise, 2.0.6-20131105004505-precise), libgimp2.0:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), gir1.2-rb-3.0:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), wpasupplicant:i386 (0.7.3-6ubuntu2.1, 0.7.3-6ubuntu2.2), libcjs0c:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), nemo-data:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), totem:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), gimp-data:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), transmission-common:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1), cinnamon-translations:i386 (2.0.1-20131021040407-precise, 2.0.1-20131105040807-precise), totem-mozilla:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-plugin-magnatune:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), transmission-gtk:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1) End-Date: 2013-11-07 17:34:40

    Read the article

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

1