Search Results

Search found 19 results on 1 pages for 'mappeddrive'.

Page 1/1 | 1 

• Missing Home Folder XP Clients 2008R2 Domain

  - by minamhere

  We just completed a migration from Server 2003 to Server 2008R2. Everything seems to have gone well except that many of our desktops have stopped mapping the Home Folder as set in Active Directory. Other mappings that are defined on individual clients are mapping just fine, these mappings are all on the same file server as the failing Home Folders. Half of the users are on 1 file server and half are on another. Users from both servers are having this problem. I have enabled the Group Policy setting to "Wait for network before logging in". I enabled the policy to "Run Logon Scripts synchronously". There are no errors on the Domain Controller or either File Server. When I enabled Group Policy Preferences as an attempted workaround, I get this error: The user 'V:' preference item in the '<Policy Name>' Group Policy object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed. This seems to indicate that the network connection is not ready by the time Group Policy is processed. But isn't this the point of the "Wait before logging in" and "Run Logon scripts synchronously" settings? Some other background facts: The new Server 2008R2 installation is a Virtual Machine. It is on a new Subnet in a different building from the old server. DNS and DHCP were also migrated from the old DC to this new DC. These Home Folders were all working properly before the migration. Are there new security restrictions/policies in Server 2008R2 that might be causing this? Is there a way to check whether I have an underlying network connectivity issue? Maybe moving the server to the new building is causing a delay/timeout? Any thoughts or ideas on what could be causing this or how I can resolve this? Thanks.

  Read the article

• ByPass credential prompting on drive map - windows server 2k3

  - by Tone

  I have 2 windows server 2k3 machines - server A and server B, Server A is on the company domain, and Server B is not. I have a need to bypass the credential prompting that happens every time I map a drive from Server B to Server A. The reason i need to do this is that I'm running a program called SourceAnywhere on Server A that points to a VSS database on Server B. (SourceAnywhere solves the slowness issues that VSS http access has). While I can configure SourceAnywhere to point to this VSS database (after mapping drive and getting access), I cannot connect to the VSS database from my development machine - i get an error saying I can access database alias.. I'm thinking this might have to do with Server B prompting me for credentials from Server A since it isn't on the domain. Is there anyway to store these credentials? or do i need to get Server B added to the domain?

  Read the article

• Mapping drives on MacOSX (Leopard/Snow Leopard) permanently inside LAN

  - by Shyam

  Hi, How do I "map" shared folders on a Mac, permanently? With map, I do not mean 'connect', but permanently add it to the system so it exists after reboot. Since workstations tend to shutdown, I wonder also the symptoms and cures in case that happens. In Linux, this can be done using the fstab file, but I noticed that volumes are mounted in a different structure than Linux. I need this to backup some workstations, doing a recursive job over a single directory, that should contain the shared folders. I use Terminal to access the main system, so by preference, the solution would be nice that works within a bash shell vs GUI. I can access all folders in Finder. Thanks!

  Read the article

• Drive Mapped On Amazon EC2 Instance Startup Disconnected After Logon

  - by jsn

  I am launching an Amazon EC2 instance (Windows Server 2012), and on startup (though User Data field), it runs this powershell script: <powershell> NET CONFIG SERVER /AUTODISCONNECT:-1 # clear all prior connections net use * /delete /y > C:\delLog.txt 2>&1 # mount new drive net use R: \\dbHost\share /user:username pass /persistent:yes > C:\useLog.txt 2>&1 ipconfig /all > C:\ipLog.txt </powershell> When it launches and I connect to it through RDP, it shows in explorer "Diconnected Network Drive (R:). If I double click it, error message displays "R:\ is not accesible. Access id denied". Normally, it would ask me for credentials to reconnect. I need for this drive to be connected through the duration of the instance. delLog.txt contents: You have these remote connections: T: \\dbHost\share Continuing will cancel the connections. The command completed successfully. useLog.txt contents: The command completed successfully. ipLog.txt contents as expected. The net use commands works fine by itself, it connects. Anyone have any idea what could be wrong? There is only one account on these machines - Administrator. It is a samba share to a Linux server on a private network.

  Read the article

• "Path Not Found" when attempting to write to a sub folder within a mapped drive

  - by Adam

  We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

  Read the article

• Mapped drives not showing in first run of Windows Explorer

  - by Alistair McMillan

  We have a couple of users whose mapped drives don't always appear in Windows Explorer when they initially log in. "net use" shows the drives are mapped correctly and they can see them in File Open dialogs in other applications. However they don't appear in Windows Explorer. The current workaround we have is to kill Windows Explorer and then immediately start it again, then they do reliably appear. Any ideas?

  Read the article

• mapping server 2008 network drive to vista home premium x64

  - by rboorgapally

  Hi, We have a windows server 2008 box at my work place. I want to map a drive from the server to my laptop. I use windows vista home premium x64. I am connected to my workplace through VPN. i can map the drive when I use the administrator account on the server. But the log on is unsuccessful if I use my personal account on the server to map the drive. My personal account on the server is part of Administrators group. Can any one help me with this?

  Read the article

• How to tell credentials used for a Network Mapping?

  - by shanecourtrille

  I have a networking mapping that doesn't appear to work. When I connect to the mapping I get access denied when I try to create a folder. When I created the mapping I told it to login as another account. I have verified that account has the proper rights on the server side of things. How can I verify that my local machine is connecting with the right credentials?

  Read the article

• Network drives don't get mapped and desktop redirection stops working when domain user becomes a member of the Local Administrator group on their PC

  - by Kim Jong-Un

  We have a Small Business Server 2003 domain controller with Windows 7 workstations joined to the domain. I noticed recently that, if I make a user a local administrator on his computer, his redirected desktop and mapped network drives do not connect at login (error on login that network drives inaccessible and desktop is blank). However, it is still possible for this user to browse to his home directory where his redirected folders are located- so he still has access to that location. Does anyone have any theories as to what is going on here?

  Read the article

• Network connection keeps dropping - bad hardware?

  - by Bill Sambrone

  Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

  Read the article

• Double Click to open Office docs is slow, File -> Open is fast.

  - by Keith

  I have 2 unique networks. They both share similar architecture: Windows 2003 SBS SP2 Running Symantec Endpoint Running Symantec Information Foundation Shared drives off a data partition Clients running Office 2003 or 2007 Connect to file server through mapped drives When users try to open a file from their local PC by double clicking, it will take 30-60 seconds to open. When they do File - Open, those same documents open up almost immediately. So far I've tried the following - CCleaner to parse the registry of outdated mapped drives - Disabled "using DDE" - Disabled A/V - Reboot Any ideas beyond that? Figured this question belongs here instead of SU since its the same issue on different networks.

  Read the article

• Best Practices in Preventing Locks in File sharing in Windows?

  - by crosenblum

  We have a web development server, that has our source control on it. That we use via mapped drives to open/edit/save/create files on to it. But I have noticed a lot of weird glitches with either the file lock/sharing/etc For example, if i have a file open on my local pc, and try to check out that file via my source control on dev, it error's out. The source control I use is QCVS by Qumasoft. Or If I use cuteftp to download something to dev, via my local pc, it won't download unless I close that file. So my brain sniff's and figures this is either an issue with folder/network/sharing, or an issue of permissions. Has anyone else had similar issues, and what did they do to fix it permanently? Thank you...

  Read the article

• script to list user's mapped drive not giving results or error

  - by user223631

  We are in the process of migrating two file servers to a new server. We have mapped drives via user group in group policy. Many users have manually mapped drives and we need to find these mappings. I have created a PowerShell script to run that remotely get the drive mappings. It works on most computers but there are many that are not returning results and I am not getting any error messages. Each workstation on the list creates a text file and the ones that are not returning results have no text in the files. I can ping these machines. If the machine is not turned on, it does come up error message that the RPC server is not available. My domain user account is in a group that is in the local admin account. I have no idea why some are not working. Here is the script. # Load list into variable, which will become an array of strings If( !(Test-Path C:\Scripts)) { New-Item C:\Scripts -ItemType directory } If( !(Test-Path C:\Scripts\Computers)) { New-Item C:\Scripts\Computers -ItemType directory } If( !(Test-Path C:\Scripts\Workstations.txt)) { "No Workstations found. Please enter a list of Workstations under Workstation.txt"; Return} If( !(Test-Path C:\Scripts\KnownMaps.txt)) { "No Mapping to check against. Please enter a list of Known Mappings under KnownMaps.txt"; Return} $computerlist = Get-Content C:\Scripts\Workstations.txt # Loop through each item in the array (each computer in the list of computers we loaded into the variable) ForEach ($computer in $computerlist) { $diskObject = Get-WmiObject Win32_MappedLogicalDisk -computerName $computer | Select Name,ProviderName | Out-File C:\Tester\Computers\$computer.txt -width 200 } Select-String -Path C:\Tester\Computers\*.txt -Pattern cmsfiles | Out-File C:\Tester\Drivemaps-all.txt $strings = Get-Content C:\Tester\KnownMaps.txt Select-String -Path C:\Tester\Drivemaps-all.txt -Pattern $strings -notmatch -simplematch | Out-File C:\Tester\Drivemaps-nonmatch.txt -Width 200 Select-String -Path C:\Tester\Drivemaps-all.txt -Pattern $strings -simplematch | Out-File C:\Tester\Drivemaps-match.txt -Width 200

  Read the article

• Change drive letter of DVD drive

  - by NickC

  I am trying to use a Drive Maps GPO on Server 2012 - User Configuration - Preferences - Windows Settings - Drive Maps. Problem is I want to map a drive to D: but this is automatically assigned to the DVD drive. Question is can I prevent D: being used as the next drive letter when Windows 8 boots up? I seem to recall in early version of Windows, or maybe it was Novell, a first_drive environment variable for this purpose.

  Read the article

• Win Server 2008 R2 - Mapped shared folder hanging?

  - by M-Tech

  I have recently built a windows 2008 server R2 machine. This is purely for file server purposes and is very much a basic build. All windows updates installed and part of domain. I have setup a shared folder on the C:Drive and added permissions for domain users as co-owners. The client machines run XP SP3 and are part of the domain also. We have a few servers running the same setups on a few of our sites but this one is particular crashes users machines (explorer.exe hangs for at least a few mins) when attempting to access the shared folder. I have turned off the option on the network card for power save aswell still no change. Any help with this is very much appreciated and i look forward to hearing from you ;)

  Read the article

• Map path server with workgroup to other server with domain

  - by bzamfir

  I have the following situation, and I need some help to setup properly I have two VPS (hosted with the same provider, maximumasp). Server A is 2008R2, set with WORKGROUP, and server B is 2012, set with domain, maximumasp.local. On server A I have an old web app, which uses a special folder, c:\MyUploads, to store uploaded files. App is using this using an appSetting. It will be kept running for a while for safety / compatibility reasons. I installed a new version of the application on server B, running under AppPoolIdentity. Both instances of the app (A and B) will connect to the same database, so I need them to share also the access to upload folder c:\MyUploads. How should I setup the app on machine B to access the folder c:\MyUploads ? My idea is to share the folder as \A\MyUploads, and then map it to server B. But the problem is, I don't know to give Read/write to c:\MyUploads on machine A to IIS AppPools\ on machine B I was trying a test, and shared the c:\MyUploads to Everyone, ReadWrite. I was able to access it from machine B using \\MyUploads But when app from machine B tried to access a file, it gave error. Any idea how can I accomplish this? Some advice on best practices for such situation would be great. Thank you

  Read the article

• Windows mounted network drives slow after upgrading switch

  - by Kver

  On our small business network our old 10/100 consumer grade switch gave up the ghost, and we replaced it with a proper business-grade gigabyte switch. After wiring it in our Linux and Mac users immediately got back to working off of network drives; But 2 of our 3 Windows 7 PCs have suddenly experienced a tremendous slowdown with mapped network drives; Windows will become stuck "discovering" a folder causing applications to freeze when trying to open files. It will instantly display and browse files, but the moment you try to open one the bug hits. To remedy this we have our users copying files to the desktop, but it can take a few minutes while windows is stuck "calculating" the time it will take to copy. These aren't big files, mostly excel sheets less than 500KB - these operations are instant on Linux and Mac. (The third Windows machine is having no issues) I've tried remapping the drives, mapping to different drive letters, rebooting, etc. I'm at a loss, because switches are mostly transparent, and it's only after the switch was replaced that the Windows PCs started acting up. What black-magic voodoo am I missing to make Windows work? Thank you.

  Read the article

• mapping server 2008 network drive to vista home premium x64

  - by rboorgapally

  We have a windows server 2008 box at my work place. I want to map a drive from the server to my laptop. I use windows vista home premium x64. I am connected to my workplace through VPN. i can map the drive when I use the administrator account on the server. But the log on is unsuccessful if I use my personal account on the server to map the drive. My personal account on the server is part of Administrators group. Can any one help me with this?

  Read the article

• How can I find which logon script is being run?

  - by user2517266

  I'm having an issue with network drives. Suddenly some computers and users aren't getting their mapped network drives from the logon script. I am NOT a domain admin, I don't have permission to login to the domain controller. And I know very little about Active Directory. The issue seems random, some users this day, different users tomorrow. Some computers run fine and some won't map no matter who logs in. They are mixed OS's XP (SP3), Vista, and 7. I was looking at the domain in windows explorer and I have found the batch file(s) that maps the drives in several locations, how do I know which one is actually being ran? The .bat file is located in \DOMAIN\NETLOGON\script.bat and \DOMAIN\SYSVOL\DOMAIN\scripts\script.bat and \DOMAIN\SYSVOL\DOMAIN\policies\GUID(Right? It's a crazy string)\User\Scripts\Logon\script.bat So, how can I figure out which one is actually being ran per computer or user? Cause they are all slightly different from each other and one of them doesn't map properly. Do all the files in NETLOGON get ran? Cause there are 15+ files in there. Or is it specified in Group Policy which one(s) get ran? EDIT: I am able to access a program called Active Directory Users and Computers, but the properties tab for any user is blank for the logon script.

  Read the article

1