Search Results

Search found 18596 results on 744 pages for 'c how to detect all ip addresses from a lan'.

Page 10/744 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • What IP's should the servers be assigned?

    - by user273284
    I have got 4 subnets (calculated using online calculators) The major network is: 172.16.0.0/16 The students subnet having the highest IP requirement /22 mask gets 172.16.0.1 - 172.16.3.254 as assignable IP's Staff subnet /23 mask gets 172.16.4.1 - 172.16.5.254 as assignable IP's Management subnet /27 mask gets 172.16.6.1 - 172.16.6.30 as assignable IP's Servers subnet /27 mask gets 172.16.6.33 - 172.16.6.62 as assignable IP's Should I follow this IP addressing scheme or should the servers get the first 30 IP's of the network i.e. 172.16.0.1 - 172.16.0.31 ? What is the best practice?

    Read the article

  • Combine WLAN with LAN

    - by fiatux
    I have D-link DSL 2750U wireless router. My PC and notebook are connected to router by Wi-Fi. They can share files or ping each other. I have a network storage unit plugged into router by an ethernet cable. Any of the computers cannot reach that storage unit or ping it. I guess my router isolates LAN network from WLAN network. Is there a way to combine them and get the router treat all devices connected to router in a single network? Thanks.

    Read the article

  • Ping or accessing WAN IP from LAN results in failure on only one box

    - by ComputerUserGuy
    Morning/evening gents. I purchased a radical domain name today to set up a name for my services and to set up SSL. I configured the SSL fine and all but when I went to my website I couldn't connect. I can connect to the site with any other device in my house and my friend can connect to it as well from outside of the LAN. I am hosting the services with my computer and I can't access the service. Whenever I ping it using the command prompt I get a result of "General Failure.". It saddens me that they couldn't make a better message as it kind of brings me down. I'm not sure what's the deal here as I have all of my firewalls down and my ports are forwarded. Running Windows 7. Thanks for the assistance chaps.

    Read the article

  • Load-balance with LAN and Wi-Fi

    - by Synox
    I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programs in Linux is no problem for me. Similar question: Load balancing with multiple gateways

    Read the article

  • Unable to ping ip address between two locations

    - by Derek
    I have two locations office and home. From home I am unable to access my mail server. and from the office I am unable to access my personal web server. now these two locations are about 100 yards away and share the same connection from the isp. Its payed for on the same account. Also they both have different static public ip addresses. office is 216.248.94.xxx and home is 216.51.158.xxx. I cannot ping each address from each location.

    Read the article

  • What could prevent one Amazon EC2 instance from pinging another instance's Private IP?

    - by ks78
    I have multiple Amazon EC2 instances which need to communicate using private IPs. However, so far I've been unable to ping one instance's private IP from another instance. I can ping external addresses, such as their Elastic IPs and other sites (yahoo, google, etc), so it seems there's nothing wrong with the instances' network configuration. Also, they are all in the same zone, so that shouldn't be an issue. Does anyone have any idea what I could be doing wrong? Could this related to the Security Group settings?

    Read the article

  • Problem with setup VPN in Ubuntu Server 12.04

    - by Yozone W.
    I have a problem with setup VPN server on my Ubuntu VPS, here is my server environments: Ubuntu Server 12.04 x86_64 xl2tpd 1.3.1+dfsg-1 pppd 2.4.5-5ubuntu1 openswan 1:2.6.38-1~precise1 After install software and configuration: ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.2.0-24-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] /var/log/auth.log message: Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [RFC 3947] method set to=115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: ignoring Vendor ID payload [FRAGMENTATION 80000000] Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [Dead Peer Detection] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: responding to Main Mode from unknown peer [My IP Address] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R1: sent MR1, expecting MI2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R2: sent MR2, expecting MI3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: Main mode peer ID is ID_IPV4_ADDR: '192.168.12.52' Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: new NAT mapping for #5, was [My IP Address]:2251, now [My IP Address]:2847 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: the peer proposed: [My Server IP Address]/32:17/1701 -> 192.168.12.52/32:17/0 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: responding to Quick Mode proposal {msgid:8579b1fb} Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: us: [My Server IP Address]<[My Server IP Address]>:17/1701 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: them: [My IP Address][192.168.12.52]:17/65280===192.168.12.52/32 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x08bda158 <0x4920a374 xfrm=AES_256-HMAC_SHA1 NATOA=192.168.12.52 NATD=[My IP Address]:2847 DPD=enabled} Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA(0x08bda158) payload: deleting IPSEC State #6 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received and ignored informational message Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA payload: deleting ISAKMP State #5 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address]: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:51:16 vpn pluto[3963]: packet from [My IP Address]:2847: received and ignored informational message xl2tpd -D message: xl2tpd[4289]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[4289]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[4289]: setsockopt recvref[30]: Protocol not available xl2tpd[4289]: This binary does not support kernel L2TP. xl2tpd[4289]: xl2tpd version xl2tpd-1.3.1 started on vpn.netools.me PID:4289 xl2tpd[4289]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[4289]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[4289]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[4289]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[4289]: Listening on IP address [My Server IP Address], port 1701 Then it just stopped here, and have no any response. I can't connect VPN on my mac client, the /var/log/system.log message: Oct 16 15:17:36 azone-iMac.local configd[17]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0 Oct 16 15:17:36 azone-iMac.local pppd[3799]: pppd 2.4.2 (Apple version 596.13) started by azone, uid 501 Oct 16 15:17:38 azone-iMac.local pppd[3799]: L2TP connecting to server 'vpn.netools.me' ([My Server IP Address])... Oct 16 15:17:38 azone-iMac.local pppd[3799]: IPSec connection started Oct 16 15:17:38 azone-iMac.local racoon[359]: Connecting. Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 started (Initiated by me). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 started (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local pppd[3799]: IPSec connection established Oct 16 15:17:59 azone-iMac.local pppd[3799]: L2TP cannot connect to the server Oct 16 15:17:59 azone-iMac.local racoon[359]: IPSec disconnecting from server [My Server IP Address] Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Anyone help? Thanks a million!

    Read the article

  • Problem with setup VPN on Ubuntu Server 12.04

    - by Yozone W.
    I have a problem with setup VPN server on my Ubuntu VPS, here is my server environments: Ubuntu Server 12.04 x86_64 xl2tpd 1.3.1+dfsg-1 pppd 2.4.5-5ubuntu1 openswan 1:2.6.38-1~precise1 After install software and configuration: ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.2.0-24-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] /var/log/auth.log message: Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [RFC 3947] method set to=115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: ignoring Vendor ID payload [FRAGMENTATION 80000000] Oct 16 06:50:54 vpn pluto[3963]: packet from [My IP Address]:2251: received Vendor ID payload [Dead Peer Detection] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: responding to Main Mode from unknown peer [My IP Address] Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Oct 16 06:50:54 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R1: sent MR1, expecting MI2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): peer is NATed Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: STATE_MAIN_R2: sent MR2, expecting MI3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: Main mode peer ID is ID_IPV4_ADDR: '192.168.12.52' Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[5] [My IP Address] #5: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: new NAT mapping for #5, was [My IP Address]:2251, now [My IP Address]:2847 Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Oct 16 06:50:55 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: the peer proposed: [My Server IP Address]/32:17/1701 -> 192.168.12.52/32:17/0 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: responding to Quick Mode proposal {msgid:8579b1fb} Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: us: [My Server IP Address]<[My Server IP Address]>:17/1701 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: them: [My IP Address][192.168.12.52]:17/65280===192.168.12.52/32 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: Dead Peer Detection (RFC 3706): enabled Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Oct 16 06:50:56 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #6: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x08bda158 <0x4920a374 xfrm=AES_256-HMAC_SHA1 NATOA=192.168.12.52 NATD=[My IP Address]:2847 DPD=enabled} Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA(0x08bda158) payload: deleting IPSEC State #6 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received and ignored informational message Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address] #5: received Delete SA payload: deleting ISAKMP State #5 Oct 16 06:51:16 vpn pluto[3963]: "L2TP-PSK-NAT"[6] [My IP Address]: deleting connection "L2TP-PSK-NAT" instance with peer [My IP Address] {isakmp=#0/ipsec=#0} Oct 16 06:51:16 vpn pluto[3963]: packet from [My IP Address]:2847: received and ignored informational message xl2tpd -D message: xl2tpd[4289]: Enabling IPsec SAref processing for L2TP transport mode SAs xl2tpd[4289]: IPsec SAref does not work with L2TP kernel mode yet, enabling forceuserspace=yes xl2tpd[4289]: setsockopt recvref[30]: Protocol not available xl2tpd[4289]: This binary does not support kernel L2TP. xl2tpd[4289]: xl2tpd version xl2tpd-1.3.1 started on vpn.netools.me PID:4289 xl2tpd[4289]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. xl2tpd[4289]: Forked by Scott Balmos and David Stipp, (C) 2001 xl2tpd[4289]: Inherited by Jeff McAdams, (C) 2002 xl2tpd[4289]: Forked again by Xelerance (www.xelerance.com) (C) 2006 xl2tpd[4289]: Listening on IP address [My Server IP Address], port 1701 Then it just stopped here, and have no any response. I can't connect VPN on my mac client, the /var/log/system.log message: Oct 16 15:17:36 azone-iMac.local configd[17]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0 Oct 16 15:17:36 azone-iMac.local pppd[3799]: pppd 2.4.2 (Apple version 596.13) started by azone, uid 501 Oct 16 15:17:38 azone-iMac.local pppd[3799]: L2TP connecting to server 'vpn.netools.me' ([My Server IP Address])... Oct 16 15:17:38 azone-iMac.local pppd[3799]: IPSec connection started Oct 16 15:17:38 azone-iMac.local racoon[359]: Connecting. Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 started (Initiated by me). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 2). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 3). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 4). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Main-Mode message 5). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 AUTH: success. (Initiator, Main-Mode Message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Main-Mode message 6). Oct 16 15:17:38 azone-iMac.local racoon[359]: IKEv1 Phase1 Initiator: success. (Initiator, Main-Mode). Oct 16 15:17:38 azone-iMac.local racoon[359]: IPSec Phase1 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 started (Initiated by me). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: receive success. (Initiator, Quick-Mode message 2). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3). Oct 16 15:17:39 azone-iMac.local racoon[359]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode). Oct 16 15:17:39 azone-iMac.local racoon[359]: IPSec Phase2 established (Initiated by me). Oct 16 15:17:39 azone-iMac.local pppd[3799]: IPSec connection established Oct 16 15:17:59 azone-iMac.local pppd[3799]: L2TP cannot connect to the server Oct 16 15:17:59 azone-iMac.local racoon[359]: IPSec disconnecting from server [My Server IP Address] Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKE Packet: transmit success. (Information message). Oct 16 15:17:59 azone-iMac.local racoon[359]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA). Anyone help? Thanks a million!

    Read the article

  • Ruby Detect method

    - by JZ
    Select makes sense. But can someone explain .detect to me? I don't understand these data. >> [1,2,3,4,5,6,7].detect { |x| x.between?(3,4) } => 3 >> [1,2,3,4,5,6,7].detect { |x| x.between?(3,6) } => 3 >> [1,2,3,4,5,6,7].detect { |x| x.between?(3,7) } => 3 >> [1,2,3,4,5,6,7].detect { |x| x.between?(2,7) } => 2 >> [1,2,3,4,5,6,7].detect { |x| x.between?(1,7) } => 1 >> [1,2,3,4,5,6,7].detect { |x| x.between?(6,7) } => 6 >> [1,2,3,4,5,6,7].select { |x| x.between?(6,7) } => [6, 7] >> [1,2,3,4,5,6,7].select { |x| x.between?(1,7) } => [1, 2, 3, 4, 5, 6, 7]

    Read the article

  • Windows 7 network performance tuning for LAN

    - by Hubert Kario
    I want to tune Windows 7 TCP stack for speed in a LAN environment. Bit of background info: I've got a Citrix XenServer set up with Windows 2008R2, Windows 7 and Debian Lenny with Citrix kernel, Windows machines have Tools installed the iperf server process is running on different host, also Debian Lenny. The servers are otherwise idle, tests were repeated few times to confirm results. While testing with iperf 2008R2 can achieve around 600-700Mbps with no tuning what so ever but I can't find any guide or set of parameters that will make Windows 7 achieve anything over 150Mbps with no change in TCP window size using -w parameter to iperf. I tried using netsh autotuining to disabled, experimental, normal and highlyrestricted - no change. Changing congestionprovider doesn't do anything, just as rss and chimney. Setting all the available settings to same values as on Windows 2008R2 host doesn't help. To summarize: Windows 2008R2 default settings: 600-700Mbps Debian, default settings: 600Mbps Windows 7 default settings: 120Mbps Windows 7 default, iperf -w 65536: 400-500Mbps While the missing 400Mbps in performance I blame on crappy Realtek NIC in the XenServer host (I can do ~980Mbps from my laptop to the iperf server) it doesn't explain why Windows 7 can't achieve good performance without manually tuning window size at the application level. So, how to tune Windows 7?

    Read the article

  • Debian can't connect to internet using LAN

    - by tampe125
    I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect to it locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

    Read the article

  • Debian can't connect to internet using LAN

    - by tampe125
    I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

    Read the article

  • Wake on LAN Problem

    - by Caley Woods
    I'm working to get wake on lan (wol) working so that we can do some power management at my workplace. I've enabled WOL on a test laptop running Win 7 x64 and put it to sleep and hibernate both with no luck. I'm using a 3rd party utility and I've ran wireshark on the test laptop with it booted up and I can see the WOL packets coming in and the machine refuses to wake from sleep or hibernate. I thought maybe it was the computer I was using so I had another Win 7 x64 laptop nearby and I tried it, same scenario. We're in a cisco environment and I believe I gotten all the pieces in place since I'm seeing the WOL packets come through. I've tested two machines on the same subnet to eliminate the possibility of a misconfiguration on the switch, this also has the same behavior. The laptop models are a Compaq 6510b and 6730b. Is there something I'm missing? I'm trying this across UDP port 50200 since that's the port the actual management system will use after I get it working.

    Read the article

  • Wake-on-lan only works so many times

    - by Chance
    I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

    Read the article

  • How to use Public IP in case of two ISP when two differs from each other

    - by user1471995
    Please bare with my long explanation but this is important to explain the actual problem. Please also pardon my knowledge with PFsense as i am new to this. I have single PFSense box with 3 Ethernet adapter. Before moving to configuration for these, i want to let you know i have two Ethernet based Internet Leased Line Connectivity let's call them ISP A and ISP B. Then last inetrface is LAN which is connected to network switch. Typical network diagram ISP A ----- PFSense ----> Switch ---- > Servers ISP B ----- ISP A (Initially Purchased) WAN IP:- 113.193.X.X /29 Gateway IP :- 113.193.X.A and other 4 usable public IP in same subnet(So the gateway for those IP are also same). ISP B (Recently Purchased) WAN IP:- 115.115.X.X /30 Gateway IP :- 115.115.X.B and other 5 usable public IP in different subnet(So the gateway for those IP is different), for example if 115.119.X.X2 is one of the IP from that list then the gateway for this IP is 115.119.X.X1. Configuration for 3 Interfaces Interface : WAN Network Port : nfe0 Type : Static IP Address : 113.193.X.X /29 Gateway : 113.193.X.A Interface : LAN Network Port : vr0 Type : Static IP Address : 192.168.1.1 /24 Gateway : None Interface : RELWAN Network Port : rl0 Type : Static IP Address : 115.115.X.X /30 (I am not sure of the subnet) Gateway : 115.115.X.B To use Public IP from ISP A i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- WAN TCP/UDP * * 113.193.X.X1 53 (DNS) 192.168.1.5 53 (DNS) WAN TCP/UDP * * 113.193.X.X1 80 (HTTP) 192.168.1.5 80 (HTTP) WAN TCP * * 113.193.X.X2 80 (HTTP) 192.168.1.7 80 (HTTP) etc., c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the WAN those are only present. d) If this section in relevant then for Firewall: Rules at WAN tab then following default rule has been generated. * RFC 1918 networks * * * * * Block private networks * Reserved/not assigned by IANA * * * * * * To use Public IP from ISP B i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- RELWAN TCP/UDP * * 115.119.116.X.X1 80 (HTTP) 192.168.1.11 80 (HTTP) c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the RELWAN those are only present. d) If this section in relevant then for Firewall: Rules at RELWAN tab then following default rule has been generated. * RFC 1918 networks * * * * * * Reserved/not assigned by IANA * * * * * * Last thing before my actual query is to make you aware that to have multiple Wan setup i have done following steps a) Under System: Gateways at Groups Tab i have created new group as following MultipleGateway WANGW, RELWAN Tier 2,Tier 1 Multiple Gateway Test b) Then Under Firewall: Rules at LAN tab i have created a rule for internal traffic as follows * LAN net * * * MultipleGateway none c) This setup works if unplug first ISP traffic start routing using ISP 2 and vice-versa. Now my main query and problem is i am not able to use public IP address allocated by ISP B, i have tried many small tweaks but not successful in anyone. The notable difference between the two ISP is a) In case of ISP A there Public usable IP address are on same subnet so the gateway used for the WAN ip is same for the other public IP address. b) In case of ISP B there public usable IP address are on different subnet so the obvious the gateway IP for them is different from WAN gateway's IP. Please let me know how to use ISP B public usable IP address, in future also i am going to rely for more IPs from ISP B only.

    Read the article

  • Gigabit LAN not working on ASUS M2N-MX

    - by chmod
    Today I replace my FastEthernet switch with a newly bought gigabit switch (DGS-1008A). All computers in my house are displaying that the connection speed is 1 Gbps except for one. The computer that is not working is an ASUS M2N-MX which contain an onboard gigabit NIC. See ASUS link for confirmation http://www.asus.com/Motherboards/AMD_AM2/M2NMX/ Here are some info of the machine OS: Windows 7 Ultimate SP1 64bit BIOS version: 1004 (latest) Driver: installed via Windows update (latest from Windows update) Windows Update: fully updated The machine is reformatted 3 days ago, so it's pretty clean, no junk, no virus, etc Cable: Amp CAT5E 5 meters In device manager, the name of the NIC is "NVIDIA nForce 10/100/1000 Mbps Ethernet" What I have try: I did try to install the driver provided in ASUS website, but there isn't any for Windows 7 64 or Vista 64. I did try to install the latest nForce340/6100, downloaded from Nvidia website. However, the LAN driver refuse to install, it complain that I already have the best driver installed. I looking in the property -- advance tab -- Speed/duplex settings, in an attempt to force it to run at 1000Mbps, but there is no 1000Mbps choice, only 10 and 100Mpbs. I change the CAT5E cable (use one from another computer that is running gigabit without problem) Anyone have this issue or know how to solve it? Thanks

    Read the article

  • realtek lan driver problem - win 7

    - by tango _123
    Hi, my new notebook (ACER TM 8371) with Win 7(x32) professional as OS, has strage behaviour with respect to LAN. when I plug or unplug my charger cable, or my notebook goes in stad-by, or just a do nothing, the netwrok connection is lost. All the energy savings functionbality have been in-activated. if i check the network adapter information, it says "a network cabel is unplugged or corrupted", but it is not true.....the cable is in and it is not corrupted (i tried several which works on other machines). if a tried to di-habilitate and hence re-habilitate, it allows di-habilitation and not to further re-habilitate (it says "no driver for the network card" are available). in some cases, also, the driver disappears (i cannot see it anylonger). if i restart the notebook, everything comes back to normality, but.....today in 3 hours i had to restart 6 times!!! can anyone help me? win 7 says the driver is the last one, so no need to update it. here are some techinical information aboiut network card and driver: Name [00000015] Realtek PCIe GBE Family Controller Adapter type Ethernet 802.3 Product type Realtek PCIe GBE Family Controller Installated YES ID device PNP PCI\VEN_10EC&DEV_8168&SUBSYS_02831025&REV_02\4&266E4C4F&0&00E2 last reset 20/11/2009 11:27 Index 15 Service name RTL8167 I/O Port 0x0000FF00-0x0000FFFF Memory address 0xE2500000-0xE2500FFF Memory address 0xE1400000-0xE140FFFF IRQ Channel IRQ 18 Driver c:\windows\system32\drivers\rt86win7.sys (7.3.522.2009, 164,00 KB (167.936 Byte), 28/08/2009 22:12)

    Read the article

  • ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

    - by Thirst4Knowledge
    ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

    Read the article

  • Blocking all RIPE Addresses in Server 2008?

    - by Brett Powell
    Our datacenter has recommended we block all RIPE IP Addresses on one of our machines. It is constantly being DDoS Attacked everytime the null routes are lifted, so I am not sure how this would help, but am more than willing to try anything now. I couldn't find much information on it from a Google search, but how can we block all RIPE IP Ranges? Preferably I wouldn't even mind blocking all Ranges that were not US Based since that is the only target we traffic, but this is probably too difficult.

    Read the article

  • Spam prevention through IP tracking

    - by whamsicore
    I am building a website with user generated comments. In order to implement user moderation/spam-protection, users have the ability to mark comments as spam. When one comment is marked as spam, I want all comments from the same IP address to be deleted. I am not familiar with spam prevention in general, other than Captcha. Question: is this a feasible/good system for spam prevention? are there better ways, or improvements I can make? Thanks.

    Read the article

  • Binding MySQL to run from the public or private LAN IP address - which one is faster

    - by Lamin Barrow
    So we have 2 servers all running at the same web host. We have bind MySQL to listen on the public ip-address of the database server and the web server connects to it from the public ip. Both servers run on the same private network. Currently, the DB connect method from our php script takes about 3ms to connect to the MySQL database server host. My question is, would MySql data interaction from the web server be faster if we bind it to listen on the private lan address on the database server instead of the public IP? or is it the same regardless and it wont make a different. i have moved this question to server fault http://serverfault.com/questions/438156/binding-mysql-to-run-from-the-public-or-private-lan-ip-address-which-one-is-fa

    Read the article

  • Get the MAC addresses of all the machines connected to a LAN when NO machines have got an IP address yet

    - by JtheRocker
    Here is the real scenario. I have say 4 machines not having any IP address yet connected to a switch. In one of the machines (OS=CentOS), I would install a DHCP server and would provide the other machines IP addresses. Prior to assigning them IP addresses, I need to get the MAC address of each of the machines that I would assign IP addresses to. So, my question here is how to I get the MAC addresses of all the machines connected to a switch when NO machine has got any IP address yet? It's mandatory for my use case that I won't be having any IP addresses before the MAC addresses. -Thanks

    Read the article

  • need direction with assigning 2 ip addresses from my isp for gaming and web hosting

    - by user269451
    Hello and thank you for the help in advance. I have a Windows server 2003 that I want to use to host my companies website and a game server for MineCraft. I have a few weblinks bookmarked in regards to setting up the web and game server but no idea what I do with the two static ip's. Do I assign each network adapter the static ip's or do they go on the router? Any help and direction is greatly appreciated.

    Read the article

  • Web server with static IP from cable provider

    - by Dmitri
    I have a subscription to 5 static IP addresses. I want to run a web server from behind a router. My network config is as follows: Server's local address is 10.1.10.2, has IIS running on it, port 80 and 443 (IIS is not my fault, had to be done) the server's ip address is static, the subnet mask is 255.255.255.0, gateway is 10.1.10.1, which is the local address of the cable modem / router / gateway thingy. All looks to be in textbook order as far as the LAN goes. I can get to anything on my LAN from any computer on my LAN, whether they have static IP or get it through DHCP from the cable modem/router thingy. however, I have no internet access form any of my LAN computers. I called Comcast tech support and they say they can connect to my modem/router just fine and can actually use it to ping any computer on the internet or any computer on my LAN from the router/modem (i checked, myself, this is in fact the case). However, nothing on my LAN has internet connectivity. I tried pinging the DNS servers, nothing. I tried directly typing in web sites' IP addresses, nothing, so doesn't seem to be a DNS issue. Any Ideas? What malfunction of a router could be causing such weird behavior? nay ideas or educated guesses are very much appreciated.

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >