Search Results

Search found 445 results on 18 pages for 'dvi'.

Page 10/18 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• Setting up 2 external monitors on a laptop with VGA splitter

  - by mike

  I have a laptop with a graphics card that supports 2 displays. I would like to know the easiest way to set it up so I can close my laptop lid and use 2 external monitors (unique displays). I use it primarily for office applications and video and want a quality, clear picture. The laptop has 1 VGA port and I have 2 24" 1920x1200 monitors that have VGA and DVI ports. So a few questions: Can I just use a VGA splitter? (seen mixed feedback on this) Would it a VGA to 2 DVI splitter give a better picture quality? (if it exists) Would I be better upgrading laptop to one with 2 digital ports ( I just see a lot with VGA and HDMI though) specs: Model: Toshiba Satellite C675-S106 (Windows 7) Graphics Card: Intel HD Graphics 3000 (supports 2 displays) Processor: Intel Core i3-2350M

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• My Graphics Card isn't working Properly

  - by Dan

  I have just upgraded from a Sapphire AMD 6670 2gb Graphics card to a Nvidia GTX 650 ti 2gb SSC and my Windows Experiance index has gone from 6.8 to 7.7 but when playing games i am seeing no improvements i cannot play saints row three on even the lowest settings but according to many people and benchmarks on the web i should be able to play it comfortably. I want to know why this is happening to me..... I have installed the latest drivers and i have direct 10 + 11 installed I am 15 and it's my birthday today as i got it as a present but its not doing what i want also in am using a dvi cable not hdmi because i need a new one and its in the post. Is it possible that using dvi will affect performance

  Read the article

• Viewsonic VG2427wm detected max resolution too low

  - by Hassan

  So I have a Viewsonic VG2427wm, which supports max resolution of 1920x1080 and I had it working at this resolution from both windows and linux PCs. Now, I need to connect it to my Dell XPS17 (L702x), which has only DP mini and HDMI, so I'm trying to connect this monitor via HDMI-to-DVI adapter (doesn't work at all) and via DP-mini-to-DVI adapter. The later works, but is limiting my max resolution to 1680x1050. Using same two adapters to connect my dell monitor works fine, so I don't suspect any of the adapters to be faulty. The driver is the latest viewsonic driver (although it's been last updated 3 years back). Any ideas, how I can force it to display it's correct native resolution?

  Read the article

• Image doesn't fill monitor when connected via HDMI

  - by russau

  Connecting a Dell Studio Slim to a Dell ST2210 21.5" monitor. The PC has a ATI Radeon HD 4350 video card. The video card has DVI and HDMI connections. When I connect with the DVI everything works fine. When I connect with the HMDI the image doesn't fill the screen, i.e. there's a approx 1 inch black border around the image. Win7 tells me the res is 1920x1080 (the native res of the monitor). Tried rebooting, no luck.

  Read the article

• Using onboard and pci-e graphics card at the same time

  - by Endle

  Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by user7651

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• What's the best multiple monitor setup I can buy for $500 and a macbook?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• Upgraded to a GTX 580 - no video signal on boot

  - by MGOwen

  I have: New Corsair 550w PSU (should be more than enough) AsRock H61M u3s3 mobo (with latest updated BIOS) Just replaced my faithful HD 7790 GPU with a refurbished EVGA GTX 580 1.5GB. When I boot, it sounds like the PC boots to windows, and the 580's fan is spinning, but I can't get any video signal from the card. Old card and integrated graphics still work fine (when I replace and use those instead). I am using the DVI ports on the card with a DVI-VGA adapter until I can get my hands on a mini HDMI adapter tomorrow. Anyone ever heard of a GPU needed something special to make the VGA signal work? Hold down a key on startup or something? I can't even find a manual for this card.

  Read the article

• Viewsonic monitor keeps showing its on-screen menu incessantly

  - by markvgti

  Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

  Read the article

• Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

  Read the article

• Monitor dectecs wrong display mode

  - by user292449

  I am running into an issue with 14.04. I have two monitors. the fist one is a 19 inch LG that runs off DVI at 1440x900. It seems to function just fine. The second is a 23 inch LG that should run at 1920x1200. It has been plugged in with both a HDMI to HDMI cable and a DVI to HDMI cable. It seems to be stuck in "I am displaying for a DVD player in 1080p mode" or some such. I had this issue with windows a long long time ago and eventually it just went away. I can set the screen display to 1920x1200 with the generic X drivers but I am a gamer and would like to use the Nvidia drivers since they deliver better performance. When I switch to the Nvidia driver I can set the resolution to 1920x1200 but the screen seems to be up and to the left with a black border down and to the right. If I switch back to the default X driver after this the screen remains stuck in the up and to the left mode. Any help would be wonderful.

  Read the article

• Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

  - by jmerkow

  I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Beginner Geek: How to Use Multiple Monitors to Be More Productive

  - by Chris Hoffman

  Many people swear by multiple monitors, whether they’re geeks or just people who need to be productive. Why use just one monitor when you can use two or more and see more at once? Additional monitors allow you to expand your desktop, getting more screen real estate for your open programs. Windows makes it very easy to set up additional monitors, and your computer probably has the necessary ports. Why Use Multiple Monitors? Multiple monitors give you more screen real estate. Hook up multiple monitors to a computer and you can move your mouse back and forth between them, dragging programs between monitors as if you had an extra-large desktop. People who swear by multiple monitors use them to display multiple things on-screen at a time. Rather than Alt+Tabbing and task switching to glance at another window, you can just look over with your eyes and then look back to the program you’re using. Some examples of use cases for multiple monitors include: Coders who want to view their code on one display with the other display reserved for documentation. They can just glance over at the documentation and look back at their primary workspace. Anyone who needs to view something while working. Viewing a web page while writing an email, viewing another document while writing an something, or working with two large spreadsheets and having both visible at once. People who need to keep an eye on information, whether it’s email or up-to-date statistics, while working. Gamers who want to see more of the game world, extending the game across multiple displays. Geeks who just want to watch a video on one screen while doing something else on the other screen. Hooking Up Multiple Monitors Hooking up an additional monitor to your computer should be very simple. Most new computers come with more than one port for a monitor — whether DVI, HDMI, the older VGA port, or a mix. Some computers may include splitter cables that allow you to connect multiple monitors to a single port. Most laptops also come with ports that allow you to hook up an external monitor. Plug a monitor into your laptop’s DVI or VGA port and Windows will allow you to use both your laptop’s integrated display and the external monitor at once. This all depends on the ports your computer has and how your monitor connects. If you have an old VGA monitor lying around and you have a modern laptop with only DVI or HDMI connectors, you may need an adapter that allows you to plug your monitor’s VGA cable into the new port. Be sure to take your computer’s ports into account before you get another monitor for it. Managing Multiple Monitors With Windows Windows makes using multiple monitors easy. Just plug the monitor into the appropriate port on your computer and Windows should automatically extend your desktop onto it. You can now just drag and drop windows between monitors. To control how this works, right-click your Windows desktop and select Screen resolution. Choose an option from the Multiple displays box. The Extend option extends your desktop onto an additional monitor, while the other options are mainly useful if you’re using an additional monitor for presentations — for example, you could mirror your laptop’s desktop onto a large monitor or blank your laptop’s screen while it’s connected to a larger display. Be sure to arrange your monitors properly so Windows understands how your monitors are physically positioned. Windows 8 allows you to extend your Windows taskbar across multiple monitors. You’ll find this option in the taskbar’s options window — right-click the taskbar and select Properties. You can also choose where you want Windows to display taskbar buttons for open programs — on any monitor’s taskbar or only on the taskbar on the associated monitor. Windows 7 doesn’t have these convenient features built-in — your second monitor won’t have a taskbar. To extend your taskbar onto an additional monitor, you’ll need a third-party utility like the free and open-source Dual Monitor Taskbar. If you just have a single monitor, you can also use the Aero Snap feature to quickly place multiple Windows applications side by side. On Windows 7 or 8, press Windows Key + Left or Windows Key + Right to make the current window take up the left or right half of your display. You could also drag any window’s title bar to the left or right edges of your screen and release the window. How useful this feature is depends on your monitor’s size and resolution. If you have a large, high-resolution monitor, it will allow you to see a lot. If you have a smaller laptop monitor with the seemingly standard 1366×768 resolution, you won’t be able to see much of each snapped window at once, so snapping windows may not be practical. Image Credit: Chance Reecher on Flickr, Camp Atterbury Joint Maneuver Training Center on Flickr, Xavier Caballe on Flickr     

  Read the article

• ESS/AucTeX/Sweave integration

  - by aL3xa

  I'm using GNU/Linux distro (Arch, if that's relevant), Emacs v23.2.1, ESS v5.9 and AucTeX v11.86. I want to setup AucTeX to recognize .Rnw files, so I can run LaTeX on .Rnw files with C-c C-c and get .dvi file automatically. I reckon it's quite manageable by editing .emacs file, but I still haven't got a firm grasp on Elisp. Yet another problem is quite annoying - somehow, LaTeX is not recognizing \usepackage{Sweave} in preambule, so I actually need to copy Sweave.sty file (in my case located in /usr/share/R/texmf/Sweave.sty) to directory where .Rnw file is located (and I'm getting more frustrated with the fact that this is common bug on Windows platforms!) My question boils down to two problems: how to make LaTeX recognize \usepackage{Sweave} (without copying Sweave.sty to "home" folder each time) how to setup AucTeX to compile .Rnw files to .dvi

  Read the article

• Sun Ray 3 Plus Appliance Announced

  - by [email protected]

  There were many of you out there wondering if Oracle was going to keep and add to the Sun Ray and Sun virtualized desktop product suite, there have been a number of affirmative statements over the last many months. However, none of them resound like this; the introduction of a new product pretty much proves the point. A couple minutes before 3:00, local time yesterday, Oracle announced the release of a new Sun Ray, appliance, the Sun Ray 3 Plus. This is the unit that will replace the SR 2 FS (which has been for sale now since the middle of last decade).  Physically it is about the same size as the 2 FS but there are some significant differences... As you can see there is no smart card reader in the front - that has moved to the top to ensure only one hand is required to insert the card.  There is also a larger surround on the card reader that lights up to show the user the card is being read (properly).  A new power on/off switch is on the front which essentially brings power consumption to ~0 watts, but there is also a new 'sleep' timer looking for 30 minutes of inactivity and then will drop the power consumption down to ~ 1watt. There are also 2 USB 2.0 ports are accessible on the front instead of one.  The standard mic in and headphone out ports are there as well.  There is even more interesting stuff on the back. From the top down there are two more USB 2.0 ports for a total of four, but then the Oracle "Peripheral Kit" keyboard includes a 3-port USB Hub, too.  There's a 10/100/1000 Ethernet port as well as a 1000 Mb SFP port.  Standard DB-9 Serial port and then two DVI ports.  Then there is the really big news.  Two DVI ports driving 2560 x 1600 resolution, each. Most PCs can't do that without adding an adapter card.Now the images I have here are ones taken on a prototype a couple months back.  They are essentially the same as the Production unit, but if you would like to see an image of the Production Sun Ray 3 Plus unit you can see one here. There is a full data sheet available here. So this is the first Oracle Sun Ray desktop appliance.  Proof that the product line lives on.  A very good start!

  Read the article

• How to set the monitor to its native resolution when xrandr approach isn't working?

  - by Krishna Kant Sharma

  I am trying to setup my Samsung syncmaster B2030 monitor in ubuntu 12.04. It's native resolution is 1600x900 which I am not getting in ubuntu and which I am trying to get. I tried using xrandr approach provided in these urls: 1) http://www.ubuntugeek.com/how-change-display-resolution-settings-using-xrandr.html 2) How to set the monitor to its native resolution which is not listed in the resolutions list? S1) I used cvt 1600 900 60 to get the modeline. Output was: # 1600x900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz Modeline "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync S2) I then used xrandr and output was: Screen 0: minimum 8 x 8, current 1152 x 864, maximum 8192 x 8192 DVI-I-0 disconnected (normal left inverted right x axis y axis) VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) which gave me "VGA-0". S3) Then I used xrandr --newmode "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync But instead of adding the modeline it just threw an error: X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 29 Current serial number in output stream: 29 My system details: 1) ubuntu 12.04 LTS 2) Graphic card: GeForce 9400 GT/PCIe/SSE2 (driver is successfully installed. I am checking it in System Settings Details. And it's showing that driver is installed and its "GeForce 9400 GT/PCIe/SSE2") 3) Monitor: Samsung syncmaster B2030 4) Resolutions I am getting: 800x600 1024x768 1152x864 (I am currently using this one) 1360x768 (this one isn't working properly) Does anyone know what I can do? Thanks in advance. UPDATE (1): Today I tried it again. And adding a modeline (using --newmode) worked. But when I used --addmode by: xrandr --addmode VGA-0 1600x900_60.00 It gave this error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30

  Read the article

• Can't get ubuntu 12.04 to set pixel resolution higher than 1360x768

  - by walt

  Can't get ubuntu 12.04 to set pixel resolution higher than 1360x768. Very new to linux liking it other than this lol. I have a dell xps 420 with a nvidia geforce 260 hooked up to my 55 inch tv through a dvi/hdmi adapter.The display program wont set the resolution above 1360x768.I have tried the two "additional driver" options for the graphics card and the Details Window doesn't recognise with either driver.

  Read the article

• Dual Frame Buffer on Ubuntu 12.04 Intel HD Graphics 4600 i7-4770

  - by user3692512

  I have 2 monitors connected to the PC, one in HDMI, one in DVI. I have Intel integrated graphics HD4600 Now as far my understanding, both the monitors is connected at the same framebuffer /dev/fb0 How can I detach them and create 2 frame buffers at startup, so that I can directly write to the second monitor, by writing on the /dev/fb1, and not hamper the /dev/fb0, so that x-server can run normally on that?

  Read the article

• Is there a driver like this for Windows XP too?

  - by ptikobj

  In Ubuntu, there is a modified non-proprietary Nvidia driver preinstalled. This driver helps me get the full native resolution (1920x1020) of my flatscreen displayed without errors, while my Graphics Card (Geforce FX 5200) only supports DVI-resolutions up to 1440x900. This is a very cool thing. My question is: Is there such a kind of driver also for Windows XP? I've already tried the omega drivers, but 1920x1020 looks awful on Windows.

  Read the article

• KVM recommendations

  - by alex

  I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

  Read the article

• Dual NVidia graphics cards in Ubuntu / xorg.conf mania

  - by John Zwinck

  I have two NVidia graphics cards: Quadro NVS 295 (PCI Express, dual DisplayPort outputs) GeForce FX 5200 (PCI, DVI and VGA outputs) I have three identical monitors, two on DisplayPort and one on DVI. I'm on Ubuntu Hardy (and cannot currently dist-upgrade for separate reasons). I use the "nvidia" driver. What's new is the GeForce card and the third monitor. I currently have the dual DisplayPort monitors working fine. Here are the display-related parts of my xorg.conf: Section "ServerLayout" Identifier "Default Layout" Screen "PCI-Express Screen" 0 0 # adding this makes X fail to start: Screen "PCI Screen" 0 Inputdevice "Generic Keyboard" Inputdevice "Configured Mouse" EndSection Section "Module" Load "glx" # not sure why/if this is needed EndSection Section "Monitor" Identifier "DELL 2408WFP" Option "DPMS" EndSection Section "Device" Identifier "NVIDIA Quadro NVS 295" Driver "nvidia" Option "RenderAccel" "true" Screen 0 BusID "PCI:2:0:0" EndSection Section "Device" Identifier "NVIDIA GeForce FX 5200" Driver "nvidia" Option "RenderAccel" "true" Screen 1 BusID "PCI:6:4:0" EndSection Section "Screen" Identifier "PCI-Express Screen" Device "NVIDIA Quadro NVS 295" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+1200, 1920x1200 +0+0" EndSection Section "Screen" Identifier "PCI Screen" Device "NVIDIA GeForce FX 5200" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+0" EndSection I use nvidia-settings to configure my monitors, and it does not show the second GPU. lspci, though, shows: 02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd 06:04.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] Which is where I got the BusID settings for the two devices (when I just had one device, I didn't have any BusID listed...and adding the BusID hasn't broken anything). What am I missing? How can I make nvidia-settings show my second GPU so I can then configure its monitor?

  Read the article

• Not recognizing second monitor after hibernate (Windows 7, Dell D630 laptop)

  - by Brooks Moses

  I have a Dell Latitude D630 laptop which I've recently updated to Windows 7 64-bit. (The Dell site confirms that it's Windows-7-compatible.) Normally it lives in a docking station with a second monitor connected to the DVI port on the docking station, and I use the second monitor in a multi-monitor configuration with the laptop screen. Sometimes I undock the laptop and use it separately. Here's the problem: If I hibernate the laptop while undocked, and then power it back up in the docking station, it does not recognize the second monitor. By which I mean that not only does it not share the desktop onto the second monitor, but if I go into the control panel for display settings and press "Detect", it does not even detect the existence of the second monitor. I can tell it to "use the VGA port anyway" for a second monitor, but the monitor is connected to a DVI port on the docking station, so that doesn't do anything useful. If I entirely reboot the laptop while it's connected to the docking station, it has no problem recognizing the second monitor and using it. But then, if I hibernate, undock, de-hibernate while undocked and rehibernate, and then re-dock and de-hibernate, it's back to not recognizing the second monitor again. I'm reasonably certain that this is not a limitation of the hardware; this worked fine on Windows XP. I'm currently using the Windows 7 driver for my video card. I attempted to use the video driver from the Dell website for this laptop, but Dell only provides Vista 64-bit drivers, not Windows 7 64-bit drivers. Their "Windows 7 compatibility" page suggests that the Vista drivers should work, but when I attempted to install the driver, it gave me a "this operating system not supported" error and refused to install. Any further ideas?

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >