Search Results

Search found 445 results on 18 pages for 'dvi'.

Page 12/18 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • Three monitor setup not working on Server 2012

    - by maxp
    Using an ATI firepro 4800 card, with three monitors connected (1 dvi, 2 displayport) on Server 2008 R2 worked fine. Ive now moved to a new machine, although identical spec, with a fresh Server 2012 install, and cannot get a three display output - only two. When I try to extend the display on to the third monitor, I get the message "The display settings could not be saved. Please try a different combination of display settings" The machine is a Dell Precision T1600. Any help appreciated.

    Read the article

  • How to connect two monitors to a macbook pro? [closed]

    - by CIRK
    I have a 13" macbook pro, and I need much more space right now, so I decided to buy two smaller monitors. (these from LG). But I don't really know how will I connect them. I've seen some products like this Diamond BVU195, but it's not currently in stores in my country. I've found these Equip 128450 USB 2.0 Display Adapter DELOCK USB 2.0 to DVI/VGA/HDMI Adapter The second one looks pretty cool, but it says that Windows is a system requirement or what, so I'm not sure if it will work with mac os x? So how did you connected multiple monitors to you mac, and are these adapters the best choices, if yes then is there an OS independent one?

    Read the article

  • Digi-Kay annonce la BeagleBoard-xM, une nouvelle mouture plus complète de sa carte mère phare

    Digi-Kay annonce la BeagleBoard-xM, une nouvelle mouture plus complète de sa carte mère phare La BeagleBoard, cette carte mère compacte (7,87 x 7,62 cm) populaire auprès des férus d'informatique, sortira bientôt dans une nouvelle version plus performante. Le modèle actuel, vendu par Digi-Kay, s'organise autour d'un processeur ARM OMAP3530 de Texas Instruments cadencé à720 MHz, épaulé par 256 Mo de mémoire vive. Il embarque également un puissant DSP (processeur de signal numérique cadencé à 520 MHz) ainsi qu'un accélérateur 3D (10 millions de polygones par seconde), 256 Mo de flash pour le stockage, un lecteur SD/MMC (pour l'ajout d'une carte mémoire), un port USB 2.0, une sortie DVI, des connecteurs audio, etc? mais pas d'interface...

    Read the article

  • Enabling "AllowDualLinkModes" in xorg.conf

    - by Gausie
    I'm using a GeForce GT 620 (which is dual-link compatable) and a DVI-I dual-link splitter to try to have a desktop extended onto two monitors. At the moment when I plug in the monitors, only the monitor on the female VGA marked "1" gets a signal, and the other screen gets nothing and only one screen is detected by nvidia-settings. After reading around, I have realised that my graphics card probably comes with dual-link disabled by default, and I can enable it by adding an "AllowDualLinkModes" option to my xorg.conf. This is the current state of my xorg.conf Section "Device" Identifier "Default Device" Option "NoLogo" "True" EndSection Where do I put the line about AllowDualLinkModes? Do I create a new Section? Have I misunderstood? Cheers Gausie

    Read the article

  • No signal to monitor after driver install

    - by Hossam Riyad
    After installing 10.10 I used Hardware Drivers (Jockey) to install the graphics driver v11.2 for my ATI HD 5770. After restarting to activate the driver all went well and the boot screen showed up but not like the normal one the text was rough on the edges and after the boot finished the screen turned black and no signal. I have found some forum discussions about that issue but no fix worked for me. I use a DVI to VGA adapter and I have a View Sonic E70F CRT monitor. PC specs CPU: Intel Q8300 2.5/4 GPU: ATI Powercolor HD5770 1GB MB: Gigabyte EP43-UD3L RAM: 4GB 1066 Kingston

    Read the article

  • ATI Proprietary Driver Over/Underscan setting ignored after reboot

    - by Lassi
    I installed the proprietary driver (fglrx-updates) on Ubuntu 12.10 64-bit for my graphics card (ATI Radeon HD 7570). I am using two displays, one connected with DVI, one with HDMI. I set the desktop to be expanded to both screens and disabled the under scan for the HDMI screen, which is always for some reason enabled on HDMI screens. Now the issue. Everything was fine until I restarted my computer. After reboot, the screen connected with HDMI cable had the black borders again, meaning that the under scan is again enabled. I checked the ATI CCC, and under scan was disabled. However, moving the slider to enable under scan and then back to zero fixed the issue -- temporarily. The same issue is repeated every time I restart my computer. The settings remains the same, but the computer seems to ignore it. Any ideas how I could solve the issue?

    Read the article

  • runt integrated intel graphics card + nvidia pcie graphics card?

    - by Roberto
    Its days I am searching for information/help. Is this possible at all? I am running Ubuntu 11.10 on an intel core i3 530 on a intel dh55hc mainboard. I have 2 monitors attached, one on dvi and one on hdmi. I want to ad a third or eaven a fourth monitor using an additional graphics card nvidia in pcie slot. I cant get an image on all monitors at the same time. I am wondering if this is possible at all? Any ideas where I can get information about this? Thanks in advance Roberto

    Read the article

  • Apple Cinema Display 23" and grub

    - by Joshua Pruitt
    As per the title, I'm running my display on an older 23" Apple Cinema Display (because I still love it, darn it). I'm pushing it with an ATI Radeon DVI dual-link PCIe card. It works just fine, except GRUB doesn't seem able to push out the 1920x1200 pixel resolution needed in order to show me a boot menu! So..., I keep a smaller second monitor connected as the primary display so that I can see the boot menu and boot the system (I don't use that display once booted). This is a goofy work-around, and I'd like to just use my single display exclusively to boot the machine. I found some grub codes for higher resolutions, but not for 1920x1200. Is it capable of this? Did I just miss it? Thanks in advance!!!

    Read the article

  • Ubuntu 12.04 Touchscreen Calibration

    - by Lee
    I have a machine with Ubuntu 12.04 installed, with dual monitor, via VGA and DVI Interface. The monitor is one touch screen and the other one is regular LCD Monitor. The touch screen is made in China with some unknown brand, and I am using eGalax Driver. The touch screen is now detected and works, but i need to do some calibration since it does not correctly perform click on touch. The problem is, when I’m using xinput_calibrator, it shows 4 crosses to be clicked on, because I’m using dual monitor, the crosses is now show 2 on the touch screen (touchable) and the others on the other monitor which is regular non-touch monitor. Please help, thank you.

    Read the article

  • HDMI Audio stops after TV turned off

    - by Ryan
    After the 12.04 Update my HDMI audio stops working anytime I turn off my 2nd monitor(plasma TV). Graphics card is a Radeon 6800 which has DVI out to 1st monitor, HDMI out to receiver which the TV gets it's Audio/Video. Audio is always via my receiver sound. Things work fine as long as it boots with the TV and Receiver on. Turn off the TV and BART's HDMI audio will go away, and the HDMI option vanishes from the sound menu. I had an occasional HDMI issue with 11.10 but turning on/off the TV would fix the sound. How can I hardcode things so that it always uses HDMI out of audio? I suspect the TV is sending a signal upon that 12.04 is now listening for. Turning the TV back on does NOT resolve this, and I'd suggest having the ability to override this new "feature" via sound menu.

    Read the article

  • Switching my legacy desktop back to Windows XP from Windows 7

    - by Kevin Shyr
    I was happy with Windows 7 at the beginning, until I started to add in the peripherals.  Windows 7 was never able to recognize any of my PCI video card (I know, I know, we should be in the DVI age). Anyway, I went through another 4 days of trouble setting my computer up with dual monitor in XP (also did a bunch of other things like getting rid of my sound card and taking the computer off RAID. Kind of feel stupid to put the computer on RAID in the first place because now I can have 2 drives: double the page files program seems to run faster Microsoft Sync toy 2.1 takes care of my backup needs (Thank god they solved the network drive issue) As of last night, the system is running beautifully.  I still have a laptop with Windows 7, but even that is in dual boot mode.

    Read the article

  • Crash on shutdown when using second monitor

    - by plua
    I have recently added a second monitor to my setup. Instead of one VGA monitor, I now have one VGA and one DVI monitor hooked up to the computer. The displays work just fine. However, ever since this monitor was added Ubuntu (10.10) does not shut down properly. I go to shutdown and it starts shutting down but just hangs and I need to manually shut it down. This has been like this for weeks and I feel not comfortable shutting it down this way over and over again. Has anybody any idea what this can be? Or, also useful, does anybody know how to get some info on why this crash occurs? Any logs that can be used for this? Thanks! Paul

    Read the article

  • Monitor not recognised after apt-get upgrade on 11.10 - maximum 1024x768 resolution

    - by Josh
    I did an apt-get upgrade through update manager on 11.10. After restarting my VGA monitor is no longer recognised and I can only get a maximum of 1024x768 on a 1440x900 monitor. I can't find xorg.conf so I am pretty lost! xrandr output: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DVI-0 disconnected (normal left inverted right x axis y axis) S-video disconnected (normal left inverted right x axis y axis)

    Read the article

  • Ubuntu won't load properly all of a sudden

    - by Peter Raeves
    This has been the second time this has happened, but when I booted this morning my hardware wasn't detected anymore. I see both screens pop up as normal, choose Ubuntu 14.04 in the grub list and from that point onwards none of the following hardware seems to be used: VGA, DVI-D, USB, Audio jacks. This has happened before, but at that time, I still had one screen left, so I could navigate through the (non-USB) keyboard and how weird this may sound, but from the moment I opened Windows in vmware, all of my hardware started working again. This was a few weeks ago, but the same seems to have happened again. This time I can't use that little hack though, since now Ubuntu stops using both screens. My hardware is all detected, Ubuntu just doesn't want to use it somehow. Did anybody else encounter this and how did they solve this?

    Read the article

  • Dual Screens not working nVidia

    - by user91396
    So I'm very much an Ubuntu noob, in fact I just install Ubuntu to my P.C. and I started it up with both my screens plugged into my nVidia's dvi and vga ports and logged in, change the skin to classic gnome, because that's how it was when I last used Ubuntu (8.1), and both screens were working separately. The trouble is that I got a notification saying there was nVidia drivers to be installed, so I install them and restart my P.C., as it told me to, and when I get back on only one of my screens is working and when I go into Displays (All Settings, Displays) it doesn't register my other screen at all, and it calls my working screen "Laptop". I've tried looking through several pages of Google but I see no answer. I did try to find the nvidia-settings to see if that had the answers but sadly I couldn't locate it. Thanks in advance for any help, but please remember, I am very new to Ubuntu.

    Read the article

  • Why do the Nouveau drivers work better than the Nvidia ones?

    - by user50774
    I have a bit of a weirdie here. My rig uses an Nvidia GeForce 8600 GTS in a PCIE x16 slot. Up to about a year ago, no problems with the card. I then started getting random crashes. They got more frequent. Now, first thought: It's an old card. But I don't have the bucks to buy a new one, and my mobo doesn't have the DVI input that my monitor needs. So, I decided to take a shot with the Nouveau drives. Amazingly, they have worked flawlessly. Does anyone have a guess as to why?

    Read the article

  • Screen sometimes inverts after locking

    - by hackedd
    Sometimes, when I wake up my computer from a screen lock, one of my screens is inverted. It does not always happen (maybe one in ten times) and it is not always the same screen. Re-locking and unlocking the screen a couple of times fixes the colors again. I have a dual monitor setup on an ATI Radeon HD 3450, using two HP screens connected over DVI. I am using the radeon driver, and according to jockey there are no additional drivers available for my system. Any ideas as to why this happens?

    Read the article

  • Setting up multiple monitors KDE 12.04

    - by Brandon
    I have 1 1920x1080 display that I am using as a primary display, with a 1600x900 display off to my side. I have tried to set up the smaller display to be positioned to the right of the larger display, but I can't. The only option that works is to use it as a clone. When I connect the smaller monitor to another DVI port on my AMD Radeon HD 6950, it doesnt work at all. I can provide more information if needed. Thank you!

    Read the article

  • Problems booting Ubuntu 10.10 with Nvdia GeForce 6600gt

    - by SlyrNemesis
    I am quite new to Ubuntu and I already stumbled upon a problem. I run Ubuntu 10.10 Maverick Meerkat now and Install went fine, when trying to boot the screen popped black and I faced this message "gpu lockup - switching to software fbcon." When setting the display to onboard VGA through BIOS Ubuntu has no problem at all, but when I switch back to my AGP card (which is a Nvidia GeForce 6600GT) I get that message again. I do not use VGA for that card I use my DVI cable for it. Does anyone have an answer for me to make this work? Thank you

    Read the article

  • Compiling old versions of R (2.11 or older) on Ubuntu 13.10 (or newer)?

    - by user283293
    I am trying to compile an old version of R (2.11.1, specifically). "Why?", you might ask. Well, I have a program I am trying to run (that was not written by me, but I am hoping to use in my research) that was written in "old" R, and the program writer has specifically mentioned that R-2.11.1 or older must be used. I have run ./configure with no obvious errors (the entire output being far too long to post here, but I have been warned that I cannot make PDF, DVI, or HTML versions of the help pages, which I'm not too concerned about). Next, when I pass the make command, I am met with the following error (after a long stream of successful commands): Warning in solve.default(rgb): unable to load shared library '/home/sbowerma/Programs/R-2.11.1/modules//lapack.so': /home/sbowerma/Programs/R-2.11.1/lib/libRlapack.so: undefined symbol: _gfortran_compare_string Error in solve.default(rgb) : lapack routines cannot be loaded Error: unable to load R code in package 'grDevices' Execution halted However, I have confirmed that the library lapack.so is, in fact, in the exact position it is supposed to be.

    Read the article

  • Ubuntu will not install on my Dell Inspiron 580

    - by AndrewC
    I'm trying to install ubuntu on my Inspiron 580 (Intel Core i3 4Gb Ram Intel HD Graphics) but am having no success installing from CD or Windows installer all result in a purple rapidly flashing screen with the Ubuntu with 5 dots below it splash which doesn't change. I have tried releases 12.04.1 LTS (CD and windows installer), 11.10 (CD after reading it was certified for the 580) and today 12.10 (CD) all produce the same install failure. My Dell 1704PT monitor is connected to the intel HD board using an HDMI to DVI adaptor though I have tried a VGA cable and still got the same flashing screen. Any help gratefully received as i want to get away from Windows 7 Home Premium.

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • How to stop windows resizing when the monitor display channel is turned off / switched to different source

    - by Heartspeace
    Have a new 6870 ati radeon adapter with its drivers set to 1080p 60hz resolution hooked up to a 2008 47" high end Samsung HDMI based TV. However, when the tv is turned to a different hdmi input -(when I come back into windows) somehow Windows decides to resize all the open apps to a lower resolution - including some of the side docked hidden pop-outs. When it resizes those though - it just sticked the pop-outs in the middle of the screen and all the resized windows from the open applications in the top left corner - all of them stacked on top of each other and resized to the smaller resolution. The things that seem to be ok after returning are the icons on the desktop, the taskbar, and the sidebar. Anyone have any knowledge of 1) how this happens 2) why it happens 3) how to stop it from resizing the applications and some of the docked pop-outs (they are not really resized after returning - they are just stuck in the middle of the screen approximately where they would be if the right or bottom sidebar should be if the screen was resized to that lower resolution). My hypothesis is that upon losing HDMI signal - that Windows is told by something (driver, or windows itself) that the resolution to be without a signal being present (noting that HDMI signals and handshakes are two way on HDMI devices. If it loses the signal or the tv is switched to another device - then the display adapter must figure that out and tell Windows or figures it out and designs randomly to change the display size). Any and all help is most appreciated. I asked AMD/ATI - but they said they don't know why or how this is happening. I was hoping that maybe this is THE place that the super users truly go to - those that develop display adapter drivers, or that dive deeply into these areas of windows. If there is better sites or just competing sites - please advise - noting I have already written AMD/ATI. HP Response / Additions 4/7/2011 It is really nice to get your reply Shinrai. (BTW is it proper etiquette on these forums to have a discussion?) Yet 'only one issue' - I am using a single display in this case - so Windows doesn't move application windows to another desktop. Windows (or something) decides to shrink the desktop it currently has and resize all windows to the maximum size of the desktop. As such I would be glad if Windows would just keep the current size of the one desktop that is in operation. I also know that this does NOT happen on monitors connected with DVI. There I have had one and two monitors setup and it doesn't resize those screens at all when disconnecting monitors, turning them off, whatever... they stay solid - everything in place - to such an extent that if you forgot the other monitor is off - you will have troubles finding some windows without using one of the control app utilities. So if I could even get the HDMI handling by Windows (or the display driver) ( 1] which is doing this anyway the display driver or Windows - and 2] where is that other resolution size (1024x768) coming from - its not the smallest and its not the largest?) to be having like DVI - Life would be golden (for this aspect anyway). ** found others with same problem in this thread: http://hardforum.com/showthread.php?t=1507324 Thanks, HP

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18  | Next Page >