Search Results

Search found 445 results on 18 pages for 'dvi'.

Page 13/18 | < Previous Page | 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • How to connect two monitors to a macbook pro?

    - by CIRK
    I have a 13" macbook pro, and I need much more space right now, so I decided to buy two smaller monitors. (these from LG). But I don't really know how will I connect them. I've seen some products like this Diamond BVU195, but it's not currently in stores in my country. I've found these Equip 128450 USB 2.0 Display Adapter DELOCK USB 2.0 to DVI/VGA/HDMI Adapter The second one looks pretty cool, but it says that Windows is a system requirement or what, so I'm not sure if it will work with mac os x? So how did you connected multiple monitors to you mac, and are these adapters the best choices, if yes then is there an OS independent one?

    Read the article

  • localhost/phpmyadmin pulls blank page

    - by Atul Modi
    When I tried configuring local machine as a Internet Gateway with website development capabilities over it and I installed all required software into it. I also had disable the selinux into it. But PROBLEM is when I do http://localhost/phpMyAdmin or all lower case than the page shows it as a blank page. I am pasting code from httpd.conf file into this as well as from phpMyAdmin.conf file I am using Fedora 16 for this. httpd.conf ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule dbd_module modules/mod_dbd.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost UseCanonicalName Off DocumentRoot "/var/www/html" Options FollowSymLinks AllowOverride None Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all UserDir disabled DirectoryIndex index.html index.htm index.php AccessFileName .htaccess Order allow,deny Deny from all Satisfy All TypesConfig /etc/mime.types DefaultType text/plain MIMEMagicFile conf/magic HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %b" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" AllowOverride None Options None Order allow,deny Allow from all IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ # HEADER README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-tar .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .xml AddHandler application/x-httpd-php .xml AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en ForceLanguagePriority Prefer Fallback ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4.0" force-response-1.0 BrowserMatch "Java/1.0" force-response-1.0 BrowserMatch "JDK/1.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully Order allow,deny Allow from all # phpMyAdmin.conf Alias /phpMyAdmin /usr/share/phpMyAdmin Alias /phpmyadmin /usr/share/phpMyAdmin Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Can anyone help into this area please. Urgent reply will be appreciatable because i am struggling since one and half month for this matter. thank you, Atul

    Read the article

  • Machine Check Exception

    - by Karl Entwistle
    When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

    Read the article

  • Live noise-filter on line-in

    - by Damon Gant
    I'm running the following setup: Xbox 360 is hooked up to my (PC) screen via HDMI/DVI converter. Because the Xbox has no dedicated sound output, except for optical S/PIDF, I'm also using the AV/RCA output, namely just the audio, which is connected to an old stereo, which is then connected to my PCs line-in. I'm now experiencing a some of noise. I'm using one of the standard "Realtek High Definition Audio" cards, which doesn't seem to offer this kind of functionality. Is there a software that will playback audio right off a device while running filters on it? It doesn't have to create a device on its own, I just want to listen to it. Here's a sample: http://puu.sh/1suY6

    Read the article

  • Macbook Pro Multiple Monitor Problem

    - by thinksocrates
    I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

    Read the article

  • problem with monitor

    - by misha nesterenko
    I have an Asus VB191T connected to notebook via DVI connector as secondary monitor. I am observing some problems on that monitor. Photo of a properly functioning screen: Photo of my Asus VB191T screen: So as you can see there are white lines on both sides of black ones. Resolution is set to the monitor's native resolution which is 1280x1024. The artifacts don't appear for every color, and they show up the clearest where there is black on a grey background. What could be wrong? The monitor itself? Perhaps the connector?

    Read the article

  • Realtek HD Audio 5.1 Optical Input (from Xbox 360)

    - by Shevek
    I'm trying to connect up my Xbox 360 digital audio to my 5.1 speakers via my PC (my LCD has dual input, DVI for the PC, D-SUB for the Xbox). The motherboard has a Realtek ALC888 chipset and I have a 5.1 speaker system connected via 3 x 3.5mm jacks (FR/FL, RR/RL, C/LFE) and I get full 5.1 output from the PC. I have connected the optical audio cable from the Xbox to the Optical In on the motherboard's backplate. With the Xbox in Digital Stereo mode I get 2 channel audio from the Xbox, through the PC, to the speakers. With the Xbox in Dolby Digital 5.1 mode I get no sound at all. I have the latest Realtek drivers installed in Win 7 32-bit. Questions: Is it possible to use the full 5.1 DD from the Xbox? If so, am I missing some option(s) in the Realtek setup? Do I need some other piece of software to do this? (AC3Filter or FFDShow perhaps) Many thanks

    Read the article

  • Machine freezes when configuring dual display on Ubuntu 9.10 (karmic)

    - by sa125
    Hi - I'm trying to configure dual displays on an Ubuntu 9.10 machine. When I connect the 2 screens (1 VGA input, the other DVI), I see them in a mirrored display. I opened up Display Settings and unchecked the 'mirror screens' box, and when I clicked apply, the machine froze and I had to force restart it. This happened repeatedly for about 6 times until I gave up. How do I set it up to boot up normally with dual display working? thanks. edit: I thought it might be related to the virtual screen size, so I tried to edit /etc/X11/xorg.conf to add: SubSection "Display" Virtual 2560 1024 EndSubSection But that didn't do much. Each screen works fine on it's own, and together with mirrored display.

    Read the article

  • Dell XPS 420: Turning computer on, video ports showing static

    - by Roy Rico
    I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

    Read the article

  • setting up multi-mon windows + mac

    - by psychotik
    Ok this is a stretch, but I know of some Windows only software that does this so curious if there is something that does it on the mac too. I have 2 monitors and 2 development machines - a PC and a Mac Mini. I want to be able to view/control both concurrently (one on each monitor). The Mac only has DVI out, the PC has both and my monitors have both. Any suggestions on how I can do it? A solution involving KVM or software (VNC/remoting) is OK... Thanks!

    Read the article

  • Monitor for HD video editing

    - by Kato
    I have been researching for days and nights on a good monitor to buy for a Mac Pro with an ATI Radeon 2600 XT (256mb). It will be used extensively for HD video editing (1080p) and photo editing, and likely also digital/3D animation next year(a lot of FCP + CS4). I am a student, so money is a little bit of an issue, but I want something that I'll be able to use semi-professionally after I'm done school, and am willing to finance something if it is worth the cost. I'm HOPING for something under $1000 though. The IPS Ultrasharps from Dell seem to be getting good reviews from other video editors. Accurate colour correction is a concern for me (hopefully something that covers Adobe spectrum), as well as a decent response time, HD resolutions, and DVI port. Also something with good gradient/definition in black areas, as this is difficult for editing on most LCDs. 1X1 pixel, brightness, good DVD playback etc. Hopefully this is not impossible to find for under $2000!

    Read the article

  • Three displays, one video card and no eyefinity mode

    - by José F. Romaniello
    I am looking for a video card to run three monitors, it could be hdmi, dvi or vga. I want the three monitors to show an extended desktop but as three different desktops with maybe different resolutions, so when i maximize something it should be maximized only in one monitor. The information seems confusing, I think eyefinity tricks the OS to make it looks like one big display. I am sure I dont want this. So my question(s) is, is there a video card in the market that support 3 displays without eyefinity? Or can I use an eyefinity enabled card ( with one active display port) to run three monitors and disable eyefinity from the driver settings or something?

    Read the article

  • Cedarview drivers boot to a blank screen

    - by map7
    I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • 3rd monitor with Dell Precision 490

    - by Animesh Kumar
    I am trying to go for a 3 monitor setup on my workstation, but need some information before I can invest in a new graphics card and 2 monitors. Would be glad to get some help here: I have a Dell Precision 490 workstation with Nvidia Quadro FX 4500 graphics card (PCI-E 16) on it. It has 2 DVI-D ports that can support 2 monitors upto 2560x1600 resolution. For the third monitor, I was looking at Nvidia NVS 295 card, however I am not sure if it is physically possible to hook another card to the motherboard. Here is the spec of Precision 490: http://www.dell.com/downloads/global/products/precn/en/spec_precn_490_en.pdf Can I attach NVS 295 to it? If not, what options do I have?

    Read the article

  • Burned white shadow on 24inch monitor

    - by elias94xx
    So I got this brand new monitor today an noticed the following problem: This happens while I'm moving my browser window for example. It's not font related, it also happens with icons as you can see on the picture. It's only persistend while I'm moving something, the faster I move it, the farther away is the shadow from the origin. I tested it on windows, linux and two different systems with DVI and VGA. Is this a known issue ? Specifications: Name: Acer S242HLCBID 1920x1080 @ 60hz 2ms response time contrast: 100.000.000:1 manufacture date: week 48 2011 LED backlights

    Read the article

  • How to reset display settings in XFCE \ Ubuntu 12.04 and also flgrx drivers

    - by Agent24
    I recently upgraded to Ubuntu 12.04 and since I hate unity I installed the Xubuntu package and am using XFCE instead. Since I have a Radeon HD5770 I also installed the fglrx drivers. This all went fine (aside from the fact that the post-release update fglrx drivers have an error on installation and Ubuntu thinks they're not installed when they actually are. I configured my display settings (dual monitors, a 17" CRT on VGA and a 17" LCD on DVI) in the amdcccle program and everything was perfect. THEN, 2 days ago, I accidentally clicked on the "Display" settings in XFCE "settings" manager. After that, everything got screwed. Now, I normally run the CRT at 1152x854 and the LCD at 1280x1024 with the CRT as my primary monitor (with panel) and the LCD without panels etc just to display other windows when I want to drag them over there. The problem is now that if I set my CRT to 1152x864, it stays at 1280x1024 virtually and half the stuff falls off the screen. It also puts the LCD at 1280x1024 BUT then overlays the CRT's display ontop with different wallpaper in an L shape down the right-hand and bottom edges. In short, nothing makes sense and everything is FUBAR. I tried uninstalling fglrx through synaptic, and renaming xorg.conf and also the xfce XML file that has monitor settings but it still won't make sense. Unity on the other hand can currently set everything normally so the problem appears to be only with XFCE. In any case, I can't even get the fglrx drivers back, when I re-installed them, I can't run amdccle anymore as it says the driver isn't installed!! Can someone help me reset my XFCE settings so the monitors aren't screwed with some incorrect virtual desktop size and also so I can get fglrx drivers back and working? I really don't want to have to format and reinstall and go through all the hassle but it looks like I may have to :(

    Read the article

  • Ubuntu 12.04 LTS , Dell d410 output to External Monitor/TV with docking

    - by Gck
    I am not able to see the video output on My external monitor/TV after installing 12.04 LTS. I had the same issue with 11 versions also. This issue does not happen on 10.04 LTS version. This is my setup. Dell latitude D410 with Intel Mobile 915 GM/910GML express controller using the Dell docking station Connecting to my 42inch TV with DVI (from Docking) to HDMI cable (on TV) If i close the lid, some times i am able to see the video output on TV, but the resolution is making the fonts so small, i cannot even see it and when i click displays option to change the resolution, the output goes off completely and it is shown now on the laptop screen. one time, i got the output on both the screens, but i am not able to replicate that scenario even after trying the Fn+F8 key option on my laptop. earlier some time back when i ran version 11.x ubuntu, i was able to get the output on both the screens (basically mirrored output) with large font resolution on my TV using the monitor Test tool as mentioned here :http://www.bigfatostrich.com/2011/05/solved-ubuntu-11-04-broken-external-display/ The problem with this approach is that i have to do it every time i restart the machine and more over the video output is present on both the screens (mirrored), which is of no use. As i stated before, this does not happen with 10.04 LTS. With 10.04 LTS my laptop screen is off automatically and the output is seen on TV/external display. Can anyone share any options that i can try? How can we achieve the behavior of 10.04 LTS with respect to the External display on 12.04 LTS . Thankyou very much for your help in advance.

    Read the article

  • Black stripe appears to the right of the screen, impossible to get rid of

    - by Gabriele Cirulli
    After clicking the "Auto Config" button on my Acer AL2216w screen a stripe appeared on the right of the screen where the screen doesn't "exist" and I can't seem to take the screen viewport back even by using the OCD setting and moving it to the right. The left part of the screen is also hidden and I'm not able to see what's going on there. The PC is connected to the screen through a DVI adapter and a VGA cable. I also use multiple monitors and this is the second monitor. Anyway this seems not to be a related issue, as this used to happen even when I only had a single monitor. I managed to fix this issue once but it was more than two years ago and I can't remember what I did, and out of all of the things I've tried so far (connecting the screen to another PC and performing auto adjustment, switching the cables, etc.) none worked. Here's how it looks: Can anyone help me fix this?

    Read the article

  • How do I keep second monitor (HDTV) from auto-disabling in XP when it is turned off?

    - by ThantiK
    I have a new 32" TV that I hooked up to the HDMI port on the back of my video card to use as a second monitor. I used an HDMI/DVI cable to hook it to the TV, and whenever I turn my TV off, XP disables the device tied to the TV so each time I want to use the TV as the monitor, I have to go into my display properties and enable it; it gets pretty annoying. How do I turn this 'feature' off? -- I have an NVidia card should it be specific to the nvidia control panel.

    Read the article

  • Converting a Full HD Inspiron 9400 laptop LCD to a standalone monitor

    - by jhaukur
    Has anyone tried converting a LCD laptop monitor (17" full HD in this instance) to a stand-alone monitor? Are there any converters that one can buy to send DVI or VGA signals to the plug that is used to connect said LCD to the laptop motherboard? My laptop is the infamous Dell Inspiron 9400 (1705) model. They can have awesome monitors but if you check out ebay, there are many there for sale for little to nothing since the graphic cards fault unsually often in those machines. I'd like to be able to use the LCD and just scrap the rest.

    Read the article

  • Help: Best way to do a TV-out in 7300GT Nvidia video card?

    - by Martin Ongtangco
    I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

    Read the article

  • Macbook Pro Multiple Monitor Problem

    - by thinksocrates
    I have been using a Macbook pro (newest model) for about 4 weeks with dual monitors. It has been working great using the mac adaptor to dvi. Today however, my mac will not recognize it's built in monitor while the second monitor is plugged in. Plug in second monitor The screen on the laptop goes dark. The second monitor acts as the main screen. Click "Detect displays". Nothing happens Unplug the second monitor Screen on the laptop comes on. Any thoughts?

    Read the article

  • Monitor sleep in Windows XP does not work. Is there an add on to force it?

    - by bert
    I have an EEE box with XP Home and a DVI connected TFT, and it does not sleep the monitor. It only starts working after I go to the energy control panel and turn it off and on again. Then the timed sleep works for the current session of computer use. After a shut down and boot next day, sleep does not work again (it is still set in the preferences however). What can hold the sleep function from working? Are there issues with Skype or MSN? Is there a utility to be less critic to processes interrupting sleep and offer a more reliable monitor sleep function for XP?

    Read the article

  • Using a KVM with a Sun Ultra 45

    - by Kit Peters
    I have a friend with two machines: a Mac and a Sun Ultra45. He wants to use a single monitor (connected via DVI) and USB keyboard / mouse with both machines. Try as I might, the Sun box will not bring up a console if the KVM is connected. However, if I connect a monitor, keyboard, and mouse directly to the Sun box, it will bring up a console that I can then (IIRC) connect to the KVM. Is there any way I can make the Sun box always bring up a console, regardless of whether it "sees" a monitor, keyboard, and mouse?

    Read the article

  • Which video types are considered secure/trusted by Windows Vista Media Center?

    - by Page Brooks
    I've been working to set up a Windows Vista Media Center and I noticed that when I play certain DVDs, the video is scrambled. After watching this video, I think it is because Windows Vista considers Component Cables to be untrusted and therefore scrambles the video. The video says that VGA is a trusted video type, but I was curious of which other types are trusted? If I were to use a DVI to HDMI cable, would that be trusted? Edit: Scrambled as in: The video looks like a rainbow checkerboard. The audio plays as expected. I'm using component cables for the connection to my TV.

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18  | Next Page >