Search Results

Search found 7371 results on 295 pages for 'raid card'.

Page 10/295 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

• How to recover data from software RAID 5 disk partition

  - by Ali n

  I have CentOS 5.8 on my computer, with 5x 1TB hard drives. I used software RAID. (RAID 1 as a boot partition md0, RAID 0 as a root partition md1 and RAID 5 as /home partition md3). Unfortunately one of these hard drives failed lately and I want to replace it with a new one. I want to know that is it possible to change this hard drive without data loss? The important partition is RAID 5 so in theory if one of hard drives failed I should be able to recover its data without any problem. But in practice how can I do that?

  Read the article

• VMWare Workstation Dev Machine Disks: one fast or four echofriendly raid?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines - A dev machine running VS-2010, a build machine, a version-control machine, a web server for testing, a "personal" machine running office etc. I'll be connecting the computer to my stereo, so I'll also be running iTunes (possible on a dedicated VM) and I want the computer to be a silent one. I'll probably use an Antec P183 case. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. So, my question is as follows: In terms of heat, noise, reliability, warranty, price, capacity and performance, what would you suggest: A Raid10 4 disk array using eco-friendly disks such as the $94 1TB Western Digital Caviar Green, or one high performance disk such as the 2TB Western Digital Caviar Black at $280?

  Read the article

• some questions about raid card

  - by cpps

  I have some questions about raid card. Use LSI MegaRAID® SAS 9260-8i raid card as a example. There is only two connection ports on the raid card, and they provide two cables that can connect 8 SAS/SATA storages. The document say it can connect "Maximum 32 drives per controller", I want to know how can I connect more than 8 hard disks with this card. Is that they say "Eight internal SATA+SAS ports" means they provide two cables which can connect 8 hard drives, but you can use other way to connect Maximum 32 drives? The other question. I see host bus adapter has raid integrated , so what is the difference between host bus adapter and raid card. Are they the same? I also know is SAS/SATA Expander's function only to connect more hard drives? Thanks in advance.

  Read the article

• Certain drives in RAID 5 set intermittently are not recognized

  - by hydroparadise

  I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

  Read the article

• From which plex am I booted from on raid?

  - by rumburak

  I have a server with mirrored boot volume. It is software raid 1 in Windows Server 2008 R2. I do not have physical access to the server. I am looking for a way to check which disk is a boot drive. I need a way to check it from os. How can I do that ? EDIT: I know how to do that, but I dont think its proper way. From diskpart I can break mirror: select volume 0 break disk=0 And Windows will only allow me to do that on not current boot disk. I want to check which one is boot without breaking mirroring.

  Read the article

• Software RAID 1 broken, how do I fix this?

  - by Edward

  I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

  Read the article

• raid 5 creation (using mdadm) lots of read/writes on creation: is this normal?

  - by Gbrits

  I created a software raid 5 disk using: mdadm -C /dev/md2 -l5 -n4 /dev/sd[i-l] at the same time I'm using dstat to see io-activity: dstat -c -d -D total,sda1,md2,sdi,sdj,sdk,sdl -l -m -n and notice that disks sd[i-k] are all read from and sdl is written to. Now, I do understand that raid5 has to be configured, but it takes a really long time and all disks are clean & formatted (using xfs) so I figure there might be some kind of shortcut to skip (unnecessary? ) checking.. Is it? The creation is part of a time-critical nightly batch-process (run on amazon ec2) so it's not a one-time thing. Thanks, Geert-Jan

  Read the article

• Is it possible to use software raid in Windows 7 on the boot partition?

  - by DoctaJonez

  I want to use RAID 1 on my workstation configuration at work, and I've been looking at using the build in mirror functionality in Windows 7. When you click on the add mirror option it presents you with the following warning. I've done some Google searching and the consensus seems to be that you cannot boot from a dynamic volume, but some forum posts seem to indicate that people have tried this with success (e.g. here). With Google searches producing contradictory information I thought I'd ask you guys for an authoritative answer. Can I use the inbuilt Windows 7 mirroring for my boot partition? Or as I suspect, will it make it unbootable due to it being converted to a dynamic disk?

  Read the article

• SSD RAID 5 or 10?

  - by Kyle

  I have a few extra SSD drives (I know its rare but this has actually happened). I figured since I have almost 500 GB in SSD's I might as well replace all of my standard HDD's with them. I currently have a RAID 5 setup and enjoy the the speed and redundancy with 10k RPM drives. Should I bother to put my SSD's in RAID 5? I have not heard of anyone doing this and have no idea how it is going to work out. The loss of space doesn't really bother me since I have a 2 TB NAS with all my media on it. Does anyone have experience with putting solid state drives in a RAID 5. If RAID 5 is a bad idea has anyone had experience with a RAID 10? is it possible to stripe the SSD's and provide redundancy with standard HDD's?

  Read the article

• converting 0+1 raid array to 0

  - by werelord

  I'm currently running raid 0+1; four 500 GB drives in the array.. I'm looking at migrating the array from 0+1 (Stripe+Mirror) to 0 only (stripe).. The goal is to remove the hard drives from the array in order to put them in the newly purchased Drobo, then copy the data from the remaining striped raid to the said Drobo.. Is it sufficient to just remove the drives themselves and change the raid configuration within the nvidia raid config?? Or is there something more that needs to be done?? Does the order matter (i.e. removing drives first or changing the raid configuration??) Is it possible to migrate the array this way without having any loss of data? I'm wary about burning all that data to DVDs (few hundred GB worth) to back it up.. Any other advice from people that may have done this (or have other insight) would be helpful as well..

  Read the article

• OSX Dirve dropped out of RAID 5 Array?

  - by user41724

  I had a drive "Fail" and drop out of our raid 5 array... After reboot the drive came back up, but its "Roaming". How do I re-integrate it back into the RAID 5? Right now I have no redundancy with only 2 disks in the array. The migrate RAID Set feature of RAID Utility seems to want to crate a RAID 0 only? I have provided links to some screen caps. http://tiny.cc/3ns5r Any help would be appreciated. Thanks

  Read the article

• How to Apply a Business Card Template to a Contact and Customize it in Outlook 2013

  - by Lori Kaufman

  If you want to add a business card template to an existing contact in Outlook, you can do so without having to enter all of the information again. We will also show you how to customize the layout and format of the text on the card. Microsoft provides a couple of business card templates you can use. We will use their Blue Sky template as an example. To open the archive file for the template you downloaded, double-click on the .cab file. NOTE: You can also use a tool like 7-Zip to open the archive. A new Extract tab becomes available under Compressed Folder Tools and the files in the archive are listed. Select the .vcf file in the list of files. This automatically activates the Extract tab. Click Extract To and select a location or select Choose location if the desired location is not on the drop-down menu. Select a folder in which you want to save the .vcf file on the Copy Items dialog box and click Copy. NOTE: Use the Make New Folder button to create a new folder for the location, if desired. Double-click on the .vcf file that you copied out of the .cab archive file. By default, .vcf files are associated with Outlook so, when you double-click on a .vcf file, it automatically opens in a Contact window in Outlook. Change the Full Name to match the existing contact to which you want to apply this template. Delete the other contact info from the template. If you want to add any additional information not in the existing contact, enter it. Click Save & Close to save the contact with the new template. The Duplicate Contact Detected dialog box displays. To update the existing contact, select the Update information of selected Contact option. Click Update. NOTE: If you want to create a new contact from this template, select the Add new contact option. With the Contacts folder open (the People link on the Navigation Bar), click Business Card in the Current View section of the Home tab. You may notice that not all the fields from your contact display on the business card you just updated. Double-click on the contact to update the contact and the business card. On the Contact window, right-click on the image of the business card and select Edit Business Card from the popup menu. The Edit Business Card dialog box displays. You can change the design of the card, including changing he background color or image. The Fields box allows you to specify which fields display on the business card and in what order. Notice, in our example, that Company is listed below the Full Name, but no text displays on the business card below the name. That’s because we did not enter any information for Company in the Contact. We have information in Job Title. So, we select Company and click Remove to remove that field. Now, we want to add Job Title. First, select the field below which you want to add the new field. We select Full Name to add the Job Title below that. Then, we click Add and select Organization | Job Title from the popup menu to insert the Job Title. To make the Job Title white like the name, we select Job Title in the list of Fields and click the Font Color button in the Edit section. On the Color dialog box, select the color you want to use for the text in the selected field. Click OK. You can also make text bold, italic, or underlined. We chose to make the Job Title bold and the Full Name bold and italic. We also need to remove the Business Phone because this contact only has a mobile phone number. So, we add a Mobile Phone from the Phone submenu. Then, we need to remove enough blank lines so the Mobile Phone is visible on the card. We also added a website and email address and removed more blank lines so they are visible. You can also move text to the right side of the card or make it centered on the card. We also changed the color of the bottom three lines to blue. Click OK to accept your changes and close the dialog box. Your new business card design displays on the Contact window. Click Save & Close to save the changes you made to the business card for this contact and close the Contact window. The final design of the business card displays in the Business Card view on the People screen. If you have a signature that contains the business card for the contact you just updated, you will also need to update the signature by removing the business card and adding it again using the Business Card button in the Signature editor. You can also add the updated Business Card to a signature without the image or without the vCard (.vcf) file.     

  Read the article

• Use RAID for desktop computer?

  - by NickAldwin

  I'm building a new computer over the summer. I'm fairly competent in computer hardware, and am thus building the computer from scratch. I have everything planned out, but I was wondering if I should consider RAID/what RAID to use. I plan to purchase 2x1TB drives. Currently I'm leaning toward RAID 1 for the redundancy -- I've heard newer super-capacity drives fail more often than one would think, and I don't want to have a problem and lose all my data. What do you think? My mobo supports RAID 0/1/5/10. Is it worth it to use RAID at all, or should I just use a backup service like Mozy? Should I consider RAID 0 instead, for the performance? I'm kind-of going back and forth on this one. Thanks a lot for your help. EDIT: I'd like to avoid the OS drive different from Data drive situation, because that can get frustrating when programs like to store a lot of data in their program files folder. I've lived with that situation before and it gets annoying after a while.

  Read the article

• Error 0x80300001 Installing Windows Server 2008 R2 64bit on FastTrak TX4660 RAID volume

  - by Konstantin Boyandin

  I am trying to install Windows Server 2008 R2 Enterprise 64bit on the following hardware: motherboard Intel DBS1200BTL Promise FastTrak TX4660 RAID controller 4 disks set up in two RAID1 arrays (handled by FastTrak) I am trying to install Windows so it would boot from RAID1 volume created with the FastTrak controller. The installation goes as in the manual, I insert the disk with the driver, select 'Browse' and specify the correct driver, it finds all the RAID arrays but notifies me that error 0x80300001 happened, Windows can't be installed on the mentioned RAID volumes, since they may not be bootable (even though the target RAID volume is the first in boot options list). If I proceed with the installation, Windows copies and unpacks itself, performs other standard actions after that. After the computer is restarted, it won't boot (Windows Boot Manager appears in the boot devices list; however, neither it nor the RAID volume itself does not boot). Is it a known problem? I can attach the boot disks to the motherboard and use its RAID capabilities instead, but I'd prefer FastTrak ones. Driver version is 1.3.0.4. Thanks.

  Read the article

• Getting Grub2 to recognize a Raid 10 boot/root

  - by xenoterracide

  I've been trying to get my raid to boot from grub2 for about 2 days now and I don't seem to be getting closer. The problem appears to be that it doesn't recognize my raid at all. It doesn't see (md0) etc. I'm not sure Why or how to change this. I'm using mdadm, 2 device (essentially a raid1) raid10,f2, which is currently degraded. I have tried adding the raid and mdraid modules with grub install along with others. I've tried several variation on grub-install such as grub-install --debug --no-floppy --modules="biosdisk part_msdos chain raid mdraid ext2 linux search ata normal" /dev/md0 I've been searching the net for an answer to what I haven't done but no luck. On my other drive which I plan on removing the raid is initialized and mounted fine on boot, but it's not the boot/root for that setup. My grub.cfg isn't recognized by grub since it can't read the raid partition so I'm not posting that. md0 is not listed in my /boot/grub/device.map.

  Read the article

• Move an existing RAID 5 array from Ubuntu to Gentoo

  - by Cocoabean

  I have a 64-bit Ubuntu machine with a 4-disk RAID 5 using software raid (md). I've been able to boot an Ubuntu LiveCD and recognize the array with a simple mdadm -A /dev/md0. It was easy to mount after that and nothing had to rebuild. I'm installing Gentoo on this box now (multi-boot, non-RAID root partition) and I have md auto-detect turned on in the kernel. When I boot Gentoo I get: "invalid superblock magic on sdd" for each of the drives in the array. I boot back to Ubuntu and they mount no problem. I tried copying the mdadm.conf that works in Ubuntu to Gentoo, and then ran mdadm -A /dev/md0 but it reports that there is no array named md0. I don't want to lose data (obviously) and I don't want to have to let the RAID rebuild every time I switch between OSes. Any help is appreciated. Both are using mdadm 3.1.4 Both are running 64-bit kernels. mdadm -D /dev/md0 from Ubuntu yields: http://pastebin.com/5gj2QNkV UPDATE: After rebooting I noticed that it still complains about invalid blocks, but cat /proc/mdstat shows an inactive /dev/md127 with the same disks as my raid. I want to mount it but I don't want to get stuck waiting for a rebuild or destroying it inadvertently. mdadm -D /dev/md127 Here is pastebin of mdadm -D /dev/md127 on gentoo: http://pastebin.com/gDCWn0Rn UPDATE II: dmesg output about 'invalid raid superblocks' http://paste.ubuntu.com/885471/ fdisk -l from Ubuntu, /dev/md0 does not have any partitions but I do have it mounted and accessible: http://paste.ubuntu.com/885475/

  Read the article

• linux hardware raid 10 / lvm / virtual machine partition alignment and filesystem optimization

  - by Jason Ward

  I've been reading everything I can find about partition alignment and filesystem optimization (ext4 and xfs) but still don't know enough to be confident in setting up my current configuration. My remaining confusion comes from the LVM layer and if I should use raid parameters on the filesystem in guest os'es. My main questions are: When I use 'pvcreate --dataalignment' do I use the stripe-width as calculated for a filesystem on RAID (128kB for ext4 in my situation), the Stripe size of the RAID set (256kB), something else altogether, or do I not need this? When I create ext2/3/4 or xfs filesystems in guests on the Logical Volumes, should I add the settings for the underlying RAID (e.g. mkfs.ext4 -b 4096 -E stride=64,stripe-width=128)? Does anyone see any glaring errors in my set up below? I'm running some benchmarks now but haven't done enough to start comparing results. I have four drives in RAID 10 on a 3ware 9750-4i controller (more details on the settings below) giving me a 6.0TB device at /dev/sda. Here is my partition table: Model: LSI 9750-4i DISK (scsi) Disk /dev/sda: 5722024MiB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1.00MiB 257MiB 256MiB ext4 BOOTPART boot 2 257MiB 4353MiB 4096MiB linux-swap(v1) 3 4353MiB 266497MiB 262144MiB ext4 4 266497MiB 4460801MiB 4194304MiB Partition 1 is to be the /boot partition for my xen host. Partition 2 is swap. Partition 3 is to be the root (/) for my xen host. Partition 4 is to be (the only) physical volume to be used by LVM (for those who are counting, I left about 1.2TB unallocated for now) For my Xen guests, I usually create a Logical Volume of the needed size and present it to the guests for them to partition as needed. I know there are other ways of handling that but this method works best for my situation. Here's the hardware of interest on my CentOS 6.3 Xen Host: 4x Seagate Barracuda 3TB ST3000DM001 Drives (sector size: 512 logical/4096 physical) 3ware 9750-4i w/BBU (sector size reported: 512 logical/512 physical) All four drives make up a RAID 10 array. Stripe: 256kB Write Cache enabled Read Cache: intelligent StoreSave: Balance Thanks!

  Read the article

• Preventing h/w RAID cards from dropping slow JBOD disks

  - by Kevin

  I'm considering buying a used SAS h/w RAID card for externally attaching HDDs to an HP ProLiant I'm setting up. However, I only require RAID functionality on some of the drives. Theoretically it should be simple to JBOD the other drives, but some of them are inexpensive SATA disks and probably cannot have TLER disabled. I'd like to know, prior to actually ordering a RAID card, whether typically RAID cards would still enforce dropping of disks that do not respond within a few seconds, even if the disk is in a JBOD, and whether there is any way to disable this. Ideally it would be nice to be able to select certain SAS ports that will be pass-through, bypassing the RAID engine entirely and just acting as an HBA for those ports. I know I could buy a separate SAS HBA but that seems like a waste of $ and is also impractical as it's a 1U server so space is extremely limited. My question then is whether the functionality I'm looking for (pass-through on certain ports or at least JBOD drives not getting themselves dropped due to slow response) is typical of proper h/w RAID cards such as PERC 5/E etc. I've browsed through the latter's manual but unfortunately, as with most user manuals, it states the obvious and doesn't state the unobvious. Thanks for any info, Kevin

  Read the article

• Backup data from RAID 1 disk out of its server

  - by Doomsday

  I'm facing with a pretty easy problem in my opinion. I've extracted a working disk from a RAID1 and I'm looking to copy only data (FS and RAID configuration doesn't matter) into another location (another FS). My problem is I'm not able to mount properly this disk into another linux. I've first looked the partition table : # fdisk -l /dev/sdc Disk /dev/sdc: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 1249535699 624767818+ fd Linux raid autodetect /dev/sdc2 1249535700 1250017649 240975 fd Linux raid autodetect /dev/sdc3 1250017650 1250258624 120487+ 82 Linux swap / Solaris I've understood I should use dmraid tools. Once installed : # cat /proc/mdstat Personalities : md0 : inactive sdc1[1](S) 624767744 blocks unused devices: <none> And some other informations : # mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 8f292f54:7e5aef72:7e5ab5fd:b348fd05 Creation Time : Mon Jun 2 03:39:41 2008 Raid Level : raid1 Used Dev Size : 624767744 (595.82 GiB 639.76 GB) Array Size : 624767744 (595.82 GiB 639.76 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Update Time : Tue Feb 7 22:34:59 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : a505b324 - correct Events : 15148 Number Major Minor RaidDevice State this 1 8 1 1 active sync /dev/sda1 0 0 8 17 0 active sync /dev/sdb1 1 1 8 1 1 active sync /dev/sda1 From here, I've tried to mount but I'm not comfortable with dmtools and how it's working. # mount /dev/sdc1 /mnt/sdc1 mount: unknown filesystem type 'linux_raid_member' # mount /dev/md0 /mnt/sdc1 mount: /dev/md0: can't read superblock I've seen some options to alter RAID array with mdadm but I only want to copy data on its filesystem before wiping them... Anyone has a clue ?

  Read the article

• Graphics card initialisation problems when booting - requires a "double" boot

  - by DMA57361

  Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

  Read the article

• Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

  - by Sven

  After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

  Read the article

• Unable to Install GRUB in /dev/sda on raid drives

  - by Henry

  I'm trying to install 12.04LTS on a server but keep running into the unable to install grub error like so "Unable to Install GRUB in /dev/sda". The drives are in raid1 and I'm using fakeraid on a supermicro motherboard, which according to the manual is fully supported. I've tried installing both from USB and CD-R but still no luck. I'm not dual booting with any other OS, just using 2x320gb drives and have been choosing to install using the entire disk. Any ideas what I'm doing wrong or can do to fix this? Thanks

  Read the article

• SIM card number swap

  - by DaGhostman Dimitrov

  Is it possible to swap two numbers between two sim cards (I am just got an new phone and it is using a micro sim) And I have a old number that I want to use but it is on standart sim card. Is it possible to swap the numbers between the cards using a SIM Card reader. What software and hardware should I use? Note: I have talked with my provider but I have to cancel my old numbers contract but I like it and do not want to pay the remaining period of the contract to turn it in to PayAsYouGo and then swap ..

  Read the article

• sd card won't mount when an android phone is connected after 12.10 fresh install

  - by Mysterio

  I just upgraded to 12.10 via a fresh install. Mounting my Xperia Neo V in 12.04 worked flawlessly however I just discovered that the sd card can't be detected and mounted in 12.10. How can I solve this? Thanks in advance. P. S. I can mount it via a card reader though and it mounts ok in Windows 7. So it surely can't be hardware related. EDIT: Sony Ericsson Neo V running Android 2.3.4. USB mass storage is already turned on.

  Read the article

• Fake RAID (dmraid) not seeing new SATA drives

  - by rausch

  I have three drives in my machine, one SSD with 32GB and two 1TB drives, attached to an Intel 82801JI (ICH10) SATA AHCI Controller. The problem is, that I can access only one of the 1TB drives when the other one is not plugged in. When it is plugged in I see the drives as sda and sdb, but there seem to be no partitions. Looking at these drives with cfdisk, the partitions are there, though. Both of the 1TB drives are carrying a partition, being part of a software RAID1, created with mdadm. Before I threw the SSD into the mix, the other two have been working fine. Any hints?

  Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >