Search Results

Search found 2570 results on 103 pages for 'alex cook'.

Page 100/103 | < Previous Page | 96 97 98 99 100 101 102 103  | Next Page >

• JCP.Next - Early Adopters of JCP 2.8

  - by Heather VanCura

  JCP.Next is a series of three JSRs (JSR 348, JSR 355 and JSR 358), to be defined through the JCP process itself, with the JCP Executive Committee serving as the Expert Group. The proposed JSRs will modify the JCP's processes  - the Process Document and Java Specification Participation Agreement (JSPA) and will apply to all new JSRs for all Java platforms.   The first - JCP.next.1, or more formally JSR 348, Towards a new version of the Java Community Process - was completed and put into effect in October 2011 as JCP 2.8. This focused on a small number of simple but important changes to make our process more transparent and to enable broader participation. We're already seeing the benefits of these changes as new and existing JSRs adopt the new requirements. The second - JSR 355, Executive Committee Merge, is also Final. You can read the JCP 2.9 Process Document .  As part of the JSR 355 Final Release, the JCP Executive Committee published revisions to the JCP Process Document (version 2.9) and the EC Standing Rules (version 2.2).  The changes went into effect following the 2012 EC Elections in November. The third JSR 358, A major revision of the Java Community Process was submitted in June 2012.  This JSR will modify the Java Specification Participation Agreement (JSPA) as well as the Process Document, and will tackle a large number of complex issues, many of them postponed from JSR 348. For these reasons, the JCP EC (acting as the Expert Group for this JSR), expects to spend a considerable amount of time working on. The JSPA is defined by the JCP as "a one-year, renewable agreement between the Member and Oracle. The success of the Java community depends upon an open and transparent JCP program.  JSR 358, A major revision of the Java Community Process, is now in process and can be followed on java.net. The following JSRs and Spec Leads were the early adopters of JCP 2.8, who voluntarily migrated their JSRs from JCP 2.x to JCP 2.8 or above.  More candidates for 2012 JCP Star Spec Leads! JSR 236, Concurrency Utilities for Java EE (Anthony Lai/Oracle), migrated April 2012 JSR 308, Annotations on Java Types (Michael Ernst, Alex Buckley/Oracle), migrated September 2012 JSR 335, Lambda Expressions for the Java Programming Language (Brian Goetz/Oracle), migrated October 2012 JSR 337, Java SE 8 Release Contents (Mark Reinhold/Oracle) – EG Formation, migrated September 2012 JSR 338, Java Persistence 2.1 (Linda DeMichiel/Oracle), migrated January 2012 JSR 339, JAX-RS 2.0: The Java API for RESTful Web Services (Santiago Pericas-Geertsen, Marek Potociar/Oracle), migrated July 2012 JSR 340, Java Servlet 3.1 Specification (Shing Wai Chan, Rajiv Mordani/Oracle), migrated August 2012 JSR 341, Expression Language 3.0 (Kin-man Chung/Oracle), migrated August 2012 JSR 343, Java Message Service 2.0 (Nigel Deakin/Oracle), migrated March 2012 JSR 344, JavaServer Faces 2.2 (Ed Burns/Oracle), migrated September 2012 JSR 345, Enterprise JavaBeans 3.2 (Marina Vatkina/Oracle), migrated February 2012 JSR 346, Contexts and Dependency Injection for Java EE 1.1 (Pete Muir/RedHat) – migrated December 2011

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• The Red Gate Guide to SQL Server Team based Development Free e-book

  - by Mladen Prajdic

  After about 6 months of work, the new book I've coauthored with Grant Fritchey (Blog|Twitter), Phil Factor (Blog|Twitter) and Alex Kuznetsov (Blog|Twitter) is out. They're all smart folks I talk to online and this book is packed with good ideas backed by years of experience. The book contains a good deal of information about things you need to think of when doing any kind of multi person database development. Although it's meant for SQL Server, the principles can be applied to any database platform out there. In the book you will find information on: writing readable code, documenting code, source control and change management, deploying code between environments, unit testing, reusing code, searching and refactoring your code base. I've written chapter 5 about Database testing and chapter 11 about SQL Refactoring. In the database testing chapter (chapter 5) I cover why you should test your database, why it is a good idea to have a database access interface composed of stored procedures, views and user defined functions, what and how to test. I talk about how there are many testing methods like black and white box testing, unit and integration testing, error and stress testing and why and how you should do all those. Sometimes you have to convince management to go for testing in the development lifecycle so I give some pointers and tips how to do that. Testing databases is a bit different from testing object oriented code in a way that to have independent unit tests you need to rollback your code after each test. The chapter shows you ways to do this and also how to avoid it. At the end I show how to test various database objects and how to test access to them. In the SQL Refactoring chapter (chapter 11) I cover why refactor and where to even begin refactoring. I also who you a way to achieve a set based mindset to solve SQL problems which is crucial to good SQL set based programming and a few commonly seen problems to refactor. These problems include: using functions on columns in the where clause, SELECT * problems, long stored procedure with many input parameters, one subquery per condition in the select statement, cursors are good for anything problem, using too large data types everywhere and using your data in code for business logic anti-pattern. You can read more about it and download it here: The Red Gate Guide to SQL Server Team-based Development Hope you like it and send me feedback if you wish too.

  Read the article

• Oracle ODP.NET und Windows PowerShell

  - by cjandaus

  In der Microsoft Welt wohlbekannt, in der Oracle Welt nur ein Schulterzucken hervorrufend - die sogenannten Scripting Guys. Wie der Name bereits vermuten lässt, geht es in deren Hey, Scripting Guy! Blog um Scripting. Und damit natürlich um die Windows PowerShell. Ja, die Zeiten des DOS-Kommandofensters und Batch-Dateien ist vorbei. Die PowerShell ist eine mächtige Scripting-Umgebung unter Windows, die selbst unter Unix/Linux-Administratoren Gefallen finden sollte. Dass man damit wunderbar auch auf Oracle Datenbanken zugreifen kann, haben wir bereits vor Jahren in einer Oracle Workshop Reihe bewiesen. Damals begleitete mich Klaus Rohe von Microsoft, der mit mir dann auch gemeinsam einen Vortrag auf DOAG Konferenz hielt. Unser gemeinsames Ziel war es damals wie heute, die Oracle Anwender von der hervorragenden Integration zwischen Oracle, Windows und .NET zu überzeugen. Was lag näher, als sich dies von beiden Herstellern gemeinsam bestätigen zu lassen? Vor allem die ewigen Zweifler begrüßten dies. Seither war die PowerShell bei mir nicht mehr auf dem Radar und auch Oracle Anwender haben das Thema nicht mehr aufgeworfen. Möglicherweise auch deshalb, weil es zu neu oder zu unbekannt ist? Eher unwahrscheinlich ... Vielleicht liegt es vielmehr daran, dass man einfach mal davon ausgeht, dass PowerShell nur für Microsoft Produkte richtig nutzbar ist? Oder man bekommt erzählt, dass nur die Integration mit der Microsoft-eigenen Datenbank SQL Server möglich ist? Und das ist natürlich nicht richtig - so wie immer (ich denke dabei unter anderem an das Microsoft Active Directory - aber dazu ein andermal mehr). Umso mehr freut es mich, einen brandneuen Blog-Beitrag zu genau diesem Thema zu lesen, auf den mich Alex Keh, (Produkt Manager für Windows und .NET im Oracle Headquarter in San Francisco) aufmerksam gemacht hat. Was die Sache noch besser macht, dieser Beitrag stammt aus der Microsoft Welt und belegt damit zwischen den Zeilen, dass die Oracle Datenbank und unsere .NET Integration via dem Oracle Data Provider for .NET (ODP.NET) auch hier eine bedeutende Rolle spielt. In diesem Sinne: Beide Daumen hoch für die Scripting Guys! Der Beitrag nennt sich Use Oracle ODP.NET and PowerShell to Simplify Data Access und trotz ein paar weniger Ausreißer, ist der Artikel sehr zu empfehlen, um in das Thema einzusteigen. Lassen Sie es mich wissen, wie Sie zu dieser Integration stehen, ob die PowerShell für Sie in der Praxis wichtig ist oder werden könnte, und falls Sie Features vermissen, die Oracle künftig umsetzen sollte. Danke!

  Read the article

• Highlights from recent Yammer video

  - by Eric Jensen

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} A few weeks back, Ryan Kennedy of Yammer gave a talk about Berkeley DB Java Edition. You can find it posted here on Alex Popescu's Blog, or go directly to the video post itself. It was full of useful nuggets of information, such as why they chose to use BDB JE, performance, and some tips & tricks at the end. At over 40 minutes, the video is quite long. Ryan is an entertaining speaker, so I suggest you watch all of it. But if you only have time for the highlights, here are some times you can sync to:  06:18 hear the Berkeley DB JE features that caused Yammer select it, including: replication auto leader election, failover configurable durability and consistency guarantees 23:10 System performance characteristics 35:08 Check out the tips and tricks for using Berkeley DB JE I know the Berkeley DB development team is very pleased that BDB JE is working out well for Yammer. We definitely encourage others out there to take note of this success, especially if your requirements are similar to Yammer's (which Ryan outlines at the beginning of his talk)

  Read the article

• Splitting an MP4 file

  - by Asaf Chertkoff

  what is the fastest and less resource consuming method for splitting an MP4 file? @Alex: it didn't work, i don't know why. see the out put here: asafche@asafche-laptop:~$ ffmpeg -vcodec copy -ss 0 -t 00:10:00 -i /home/asafche/Videos/myVideos/MAH00124.MP4 /home/asafche/Videos/myVideos/eh.mp4 FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 31 2011 18:53:20, gcc: 4.4.3 Seems stream 0 codec frame rate differs from container frame rate: 119.88 (120000/1001) -> 59.94 (60000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/home/asafche/Videos/myVideos/MAH00124.MP4': Duration: 00:15:35.96, start: 0.000000, bitrate: 5664 kb/s Stream #0.0(und): Video: h264, yuv420p, 1280x720, 59.94 tbr, 59.94 tbn, 119.88 tbc Stream #0.1(und): Audio: aac, 48000 Hz, stereo, s16 Output #0, mp4, to '/home/asafche/Videos/myVideos/eh.mp4': Stream #0.0(und): Video: libx264, yuv420p, 1280x720, q=2-31, 90k tbn, 59.94 tbc Stream #0.1(und): Audio: 0x0000, 48000 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Unsupported codec for output stream #0.1 it says something about different frame rate...

  Read the article

• Power Your Cloud with Oracle Fusion Middleware

  - by user753488

  Introducing the biggest and most strategic event for Fusion Middleware this year: Power your Cloud with Oracle Fusion Middleware. Running in over 50 cities across the globe, this event is aimed at Architects, IT Managers, and technical leaders like you who are using Fusion Middleware or trying to learn more about middleware in the context of Cloud computing. Join us for a special kickoff on Wednesday, June 29th in Chicago for the first event in North America. This event features an exclusive keynote from Rick Schultz, VP of Technology Product Marketing. Cloud is certainly all the rage. But what can we make of it? According to Alex Andrianopoulos, Vice President Product Marketing for Fusion Middleware states, “Not since Java was unveiled have we seen something so transformative hit the industry. The promised benefits of Cloud are many, significant, and deliver value to both IT organizations as well as the Line of Business. The benefits range from lower data center costs, to significantly reduced environmental impact, to the ability to capture more of the opportunities that market present through increased agility in resource deployment and dramatically reduced time to market.” With an ROI so promising, why isn’t everyone on Cloud already? It’s a question a lot of IT managers are struggling with. While the promised benefits of Cloud computing can be immense, achieving them requires much more than the adoption of a new architecture, or the virtualization of servers, or the outsourcing of some or all of the IT resources. These may be useful steps towards moving to a Cloud computing blueprint, but on their own do not deliver Cloud computing and its associated benefits to the enterprise. This is exactly what we’ll be addressing in the event series, ways you can leverage Complete, Open and Integrated capabilities of Oracle Fusion Middleware today to get one step closer to Cloud. Whether you’re: Leveraging Exalogic Elastic Cloud to consolidate your applications Improving agility with Oracle SOA to generate a foundation for shared data services Securing and managing your Cloud using Oracle Identity Management and Oracle Enterprise Manager Migrating from mainframe to Cloud using Oracle Tuxedo, Coherence and GoldenGate Building applications in the Cloud swiftly and easier with Oracle’s WebCenter Suite Join us for the first of its kind event in Chicago this week by registering now, or find an event near you. Learn more about Oracle Fusion Middleware and Cloud computing today on the Oracle.com website by going to http://www.Oracle.com/goto/Middleware4Cloud

  Read the article

• How can I achieve a 3D-like effect with spritebatch's rotation and scale parameters

  - by Alic44

  I'm working on a 2d game with a top-down perspective similar to Secret of Mana and the 2D Final Fantasy games, with one big difference being that it's an action rpg using a 3-dimensional physics engine. I'm trying to draw an aimer graphic (basically an arrow) at my characters' feet when they're aiming a ranged weapon. At first I just converted the character's aim vector to radians and passed that into spritebatch, but there was a problem. The position of every object in my world is scaled for perspective when it's drawn to the screen. So if the physics engine coordinates are (1, 0, 1), the screen coords are actually (1, .707) -- the Y and Z axis are scaled by a perspective factor of .707 and then added together to get the screen coordinates. This meant that the direction the aimer graphic pointed (thanks to its rotation value passed into spritebatch) didn't match up with the direction the projectile actually traveled over time. Things looked fine when the characters fired left, right, up, or down, but if you fired on a diagonal the perspective of the physics engine didn't match with the simplistic way I was converting the character's aim direction to a screen rotation. Ok, fast forward to now: I've got the aimer's rotation matched up with the path the projectile will actually take, which I'm doing by decomposing a transform matrix which I build from two rotation matrices (one to represent the aimer's rotation, and one to represent the camera's 45 degree rotation on the x axis). My question is, is there a way to get not just rotation from a series of matrix transformations, but to also get a Vector2 scale which would give the aimer the appearance of being a 3d object, being warped by perspective? Orthographic perspective is what I'm going for, I think. So, the aimer arrow would get longer when facing sideways, and shorter when facing north and south because of the perspective. At the same time, it would get wider when facing north and south, and less wide when facing right or left. I'd like to avoid actually drawing the aimer texture in 3d because I'm still using spritebatch's layerdepth parameter at this point in my project, and I don't want to have to figure out how to draw a 3d object within the depth sorting system I already have. I can provide code and more details if this is too vague as a question... This is my first post on stack exchange. Thanks a lot for reading! Note: (I think) I realize it can't be a technically correct 3D perspective, because the spritebatch's vector2 scaling argument doesn't allow for an object to be skewed the way it actually should be. What I'm really interested in is, is there a good way to fake the effect, or should I just drop it and not scale at all? Edit to clarify without the help of a picture (apparently I can't post them yet): I want the aimer arrow to look like it has been painted on the ground at the character's feet, so it should appear to be drawn on the ground plane (in my case the XZ plane) which should be tilted at a 45 degree angle (around the X axis) from the viewing perspective. Alex

  Read the article

• Event Driven Behavior Tree: deterministic traversal order with parallel

  - by Heisenbug

  I've studied several articles and listen some talks about behavior trees (mostly the resources available on AIGameDev by Alex J. Champandard). I'm particularly interested on event driven behavior trees, but I have still some doubts on how to implement them correctly using a scheduler. Just a quick recap: Standard Behavior Tree Each execution tick the tree is traversed from the root in depth-first order The execution order is implicitly expressed by the tree structure. So in the case of behaviors parented to a parallel node, even if both children are executed during the same traversing, the first leaf is always evaluated first. Event Driven BT During the first traversal the nodes (tasks) are enqueued using a scheduler which is responsible for updating only running ones every update The first traversal implicitly produce a depth-first ordered queue in the scheduler Non leaf nodes stays suspended mostly of the time. When a leaf node terminate(either with success or fail status) the parent (observer) is waked up allowing the tree traversing to continue and new tasks will be enqueued in the scheduler Without parallel nodes in the tree there will be up to 1 task running in the scheduler Without parallel nodes, the tasks in the queue(excluding dynamic priority implementation) will be always ordered in a depth-first order (is this right?) Now, from what is my understanding of a possible implementation, there are 2 requirements I think must be respected(I'm not sure though): Now, some requirements I think needs to be guaranteed by a correct implementation are: The result of the traversing should be independent from which implementation strategy is used. The traversing result must be deterministic. I'm struggling trying to guarantee both in the case of parallel nodes. Here's an example: Parallel_1 -->Sequence_1 ---->leaf_A ---->leaf_B -->leaf_C Considering a FIFO policy of the scheduler, before leaf_A node terminates the tasks in the scheduler are: P1(suspended),S1(suspended),leaf_A(running),leaf_C(running) When leaf_A terminate leaf_B will be scheduled (at the end of the queue), so the queue will become: P1(suspended),S1(suspended),leaf_C(running),leaf_B(running) In this case leaf_B will be executed after leaf_C at every update, meanwhile with a non event-driven traversing from the root node, the leaf_B will always be evaluated before leaf_A. So I have a couple of question: do I have understand correctly how event driven BT work? How can I guarantee the depth first order is respected with such an implementation? is this a common issue or am I missing something?

  Read the article

• IIS 7.5 Basic authorization issue

  - by Alsin

  When I log on using correct user name\password (I always copy-paste them) I get 401.1 error. User name and password are correct (user is created on server locally, not a domain one). I can run program as this user (runas /noprofile /user:tmp notepad.exe). Basic authorization's default domain is a server name, realm is empty. I've saved FailedReqLogFile. AUTH_BASIC_LOGON_FAILED shows ErrorCode="Logon failure: unknown user name or bad password. (0x8007052e)" and MODULE_SET_RESPONSE_ERROR_STATUS shows ModuleName="BasicAuthenticationModule", Notification="AUTHENTICATE_REQUEST", HttpStatus="401", HttpReason="Unauthorized", HttpSubStatus="1", ErrorCode="Logon failure: unknown user name or bad password. (0x8007052e)", ConfigExceptionInfo="" And one more thing - if I use my domain login\password it woks! Basic Authentications is only enabled authentication in application... Could you please suggest me how I can troubleshoot and fix this issue? Maybe somebody hit it before... Best regards, Alex UPDATE: I get 401.1 when I trying to access site from local host. I can actually access files from remote host.

  Read the article

• Authenticating Active Directory Users to Mac OS X Mavericks Server L2TP VPN Service

  - by dean

  We have a Windows Server 2012 Active Directory Infrastructure that consists of two domain controllers. Bound to the Active Directory Domain is a Mac OS X Mavericks Server 10.9.3. The server runs Profile Manager and VPN Services. My Active Directory users are able to authenticate to the Profile Manager, but not the VPN. I have found several threads on other forums of other users reporting similar issues, here is just one of many references: https://discussions.apple.com/thread/5174619 It appears as though the issue is related to a CHAP authentication failure. Can anyone suggest what next troubleshooting steps I might take? Is there a way to liberalize the authentication mechanism to include MSCHAP? Here is an excerpt of the transaction from the logs. Please note the domain has been changed to example.com. Jun 6 15:25:03 profile-manager.example.com vpnd[10317]: Incoming call... Address given to client = 192.168.55.217 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: publish_entry SCDSet() failed: Success! Jun 6 15:25:03 --- last message repeated 2 times --- Jun 6 15:25:03 profile-manager.example.com pppd[10677]: pppd 2.4.2 (Apple version 727.90.1) started by root, uid 0 Jun 6 15:25:03 profile-manager.example.com pppd[10677]: L2TP incoming call in progress from '108.46.112.181'... Jun 6 15:25:03 profile-manager.example.com racoon[257]: pfkey DELETE received: ESP 192.168.55.12[4500]->108.46.112.181[4500] spi=25137226(0x17f904a) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP connection established. Jun 6 15:25:04 profile-manager kernel[0]: ppp0: is now delegating en0 (type 0x6, family 2, sub-family 0) Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connect: ppp0 <--> socket[34:18] Jun 6 15:25:04 profile-manager.example.com pppd[10677]: CHAP peer authentication failed for alex Jun 6 15:25:04 profile-manager.example.com pppd[10677]: Connection terminated. Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnecting... Jun 6 15:25:04 profile-manager.example.com pppd[10677]: L2TP disconnected Jun 6 15:25:04 profile-manager.example.com vpnd[10317]: --> Client with address = 192.168.55.217 has hung up

  Read the article

• "What happens?" server performance monitor

  - by AlexAtNet

  Hello! After reviewing some thread about server monitoring software I end up with a simple question: Which of the server monitoring tools should I use for automatic detection of "abnormal" situations with recommendations on how to fix them? I look for software that checks the system performance after installation and calculate some average load values (memory, CPU, etc). And when something happens (CPU load is increased to 20%) then it tries to detect a reason for this. If it is apache, it should check for access logs. If mysql, it should check mysql logs and tell me what happens. It this is because some user decodes a lot of images, I'd like to know which command is executed, when and user name. The same for disk usage, memory, number of processes, threads and so on. Ideally, this software should periodically checks the system and report problems: errors in PHP error log, outdated packages, security vulnerabilities. In other word I'm looking a software that will keep my simple Debian/Apache/PHP/MySQL server without forcing me to monitor the charts every day. I hope that such program exists. Thanks, Alex

  Read the article

• cset shield --kthread on: should I use this?

  - by lori

  I'm reading up on cpu shielding using Alex Tsariounov's cset utility here: https://rt.wiki.kernel.org/index.php/Cpuset_Management_Utility/tutorial In the tutorial I'm finding the wording around migrating kernel threads from having access to all cpus to running only in a certain cpuset a bit ambiguous The tutorial says the following: Some kernel threads can be moved into the unshielded system cpuset as well. These are the threads that are not bound to specific CPUs. If a kernel thread is bound to a specific CPU, then it is generally not a good idea to move that thread to the system set because at worst it may hang the system and at best it will slow the system down significantly. These threads are usually the IRQ threads on a real time Linux kernel, for example, and you may want to not move these kernel threads into system. If you leave them in the root cpuset, then they will have access to all CPUs. The tutorial then goes on to say: However, if your application demands an even "quieter" shield, then you can move all movable kernel threads into the unshielded system set with the following command. [zuul:cpuset-trunk]# cset shield -k on cset: --> activating kthread shielding cset: kthread shield activated, moving 70 tasks into system cpuset... [==================================================]% cset: done I am confused by this final sentence. By using the word however, it seems to suggest that you typically should not move the movable kernel threads into the unshielded system set. Is this the case, or is it safe to move kernel threads which can be moved into a cpuset, thereby preventing them from running on some cpus?

  Read the article

• Timestamp Updating Constantly on /dev/null

  - by motorleague

  I've been working on a problem with a /dev/null file on an AIX system (just for background it looks as though it was inadvertently deleted and recreated as a normal file by somebody), but in trying to determine what caused the problem, I noticed that the timestamp on it seems to update every minute. I've observed this on several AIX servers at my workplace. At present I can't entirely rule out this be something specific to the Application being used at my workplace, so I compared with CentOS and Debian based computers at home last night. The CentOS box, which runs 24 hours, had a mod time on /dev/null of around 4 days ago (during which time it was essentially just being used as a web browser and multimedia player, although it would have had active but essentially unused Apache, MySQL and VMM processes running in the background). The timestamp on /dev/null on the Debian machine, which was a just booted laptop, pretty much reflected the boot time, but I tested redirecting STDIN from, and STDOUT to it, and the modification time was unchanged (I'm not sure 100% sure if directing data to /dev/null constitutes "writing to it" in the way it would a normal file). So my question is essentially, could anybody please offer any advice with regards to what circumstances (permissions changes etc.. aside) might cause the timestamp on /dev/null to update? Thanks very much for any suggestions. Alex.

  Read the article

• Windows Server 2008 (x64): Wont boot past bios page

  - by WebSolProv

  Happy New Year, Since a month or so ago I inherited responsibility for small network administration for my sins. The domain controller (yes there is only one, and yes I know it is best practice to have two even in a small domain setup) went down overnight and I have been trying all day to get it back up and running. Unfortunately this machine also administers our entire ActiveDirectory setup: 1) It goes thru the BIOS without any errors, nothing whatsoever 2) It gets into the “select safe mode, safe mode with networking, normal” etc and if you select either of the safe mode options it loads a few files then reboots. If you select normal it just runs for a bit (doesn’t get to the windows splash screen) and then reboots again. 3) If you select windows repair, it asks for an image to repair too: however it would appear that none was taken that can be used (!!) or one is not being shown. 4) I have tried repairing the boot sector and the boot configuration using Bootrec.exe, both which it says were completed successfully but still it doesn’t work. 5) I have tried swapping the drives into another server to rule out hardware and that didn’t work either so clearly it’s the OS. 6) I have tried running chkdsk which ran fine, and also memory check which was also fine. We do have another machine on the network that was installed as a DC so when we decommission the current infrastructure but when I try and "promote" this to the lead DC then I get “you cannot modify domain or trust information because a PDC emulator cannot be contacted" so I am unable to replicare the ActiveDirectory details. If anyone can think of any direction I should follow it would be greatly appreciated, Thanks, Alex

  Read the article

• Multiple if functions

  - by user2948699

  I have problem I'm hoping someone could help me with. I have five different text values in 5 cells. I am trying to combine these values into one cell with a comma in between each. However the trick is that if there is no value in (H6) then it must place the word "and" between the cell (F6) and (G6). If there is a value in (H6) then place the word "and" between (G6) and (H6). In the same statement I must also include If there is not value in (G6) then it must place the word "and" between the cell E6 and F6. Please see image attached. I am trying to get the highlighted statements into one cell. So multiple IF statements into one cell. Anyone? =IF(G8=0,(D8)&", "&(E8)&" and "&(F8),(D8)&", "&(E8)&", "&(F8)&" and "&(G8)=IF(H8=0,(D8)&", "&(E8)&", "&(F8)&" and "&(G8),(D8)&", "&(E8)&", "&(F8)&", "&(G8)&" and "&(H8))) I cant figure out the code. Many thanks. Alex Edit: The original image can be found here if size of the inlined is too small.

  Read the article

• Using in app purchase to unlock features vs. using free & paid app versions for iPhone

  - by yabada

  I have an app that I was going to release as a free (lite) version with some of the total functionality and a paid full version with advanced functionality. Now, with in app purchase for free apps I am thinking of going that route with the ability to unlock features as needed. I'm not talking about a trial version that expires.I want people to be able to try out the app and get an idea of the interface and functionality before deciding to purchase the full functionality of each major section of the app, basically. Here's an analogy of what my app would be like. Let's say you have a cooking app that teaches you to cook in different styles. There could be major section for French, Italian, and Chinese. Each section could have some rudiments unlocked in the free app so users can see the UI and basics of the functionality. Then, the user could decide to purchase each major section (or not) individually with in app purchase or buy the full versioned app (with the free/paid model). One concern I have with offering a free app with in app purchase would be with feedback. I would be very clear in my description in the app store that there is in app purchase for full features but I'm worried that less serious users could/would leave negative feedback. I suppose that's always a risk but curious about any experience with this. It also seems that it could be a whole lot more complicated keeping track of what portions of the app are locked and unlocked with in app purchase. I know I'd have to have all the code for the full functionality and "lock" the portions that haven't been purchased. How do people usually lock portions of their code? I'm not talking about the process of purchasing (I've read the In App Purchase Programming Guide) but after the purchase has been made. Would I just keep track of what the user has purchased and put conditionals on the sections that are initially locked? Or is there another way to do this as well? My instinct is for the in app purchase (particularly since users could purchase the major sections that they want individually).

  Read the article

• Representing xml through a single class

  - by Charles

  I am trying to abstract away the difficulties of configuring an application that we use. This application takes a xml configuration file and it can be a bit bothersome to manually edit this file, especially when we are trying to setup some automatic testing scenarios. I am finding that reading xml is nice, pretty easy, you get a network of element nodes that you can just go through and build your structures quite nicely. However I am slowly finding that the reverse is not quite so nice. I want to be able to build a xml configuration file through a single easy to use interface and because xml is composed of a system of nodes I am having a lot of struggle trying to maintain the 'easy' part. Does anyone know of any examples or samples that easily and intuitively build xml files without declaring a bunch of element type classes and expect the user to build the network themselves? For example if my desired xml output is like so <cook version="1.1"> <recipe name="chocolate chip cookie"> <ingredients> <ingredient name="flour" amount="2" units="cups"/> <ingredient name="eggs" amount="2" units="" /> <ingredient name="cooking chocolate" amount="5" units="cups" /> </ingredients> <directions> <direction name="step 1">Preheat oven</direction> <direction name="step 2">Mix flour, egg, and chocolate</direction> <direction name="step 2">bake</direction> </directions> </recipe> <recipe name="hot dog"> ... How would I go about designing a class to build that network of elements and make one easy to use interface for creating recipes? Right now I have a recipe object, an ingredient object, and a direction object. The user must make each one, set the attributes in the class and attach them to the root object which assembles the xml elements and outputs the formatted xml. Its not very pretty and I just know there has to be a better way. I am using python so bonus points for pythonic solutions

  Read the article

• SharePoint – The Most Important Feature

  - by Bil Simser

  Watching twitter and doing a search for SharePoint and you see a lot (almost one every few minutes) of tweets about the top 10 new features in SharePoint. What answer do you get when you ask the question, “What’s the most important feature in SharePoint?”. Chances are the answer will vary. Some will say it’s the collaboration aspect, others might say it’s the new ribbon interface, multi-item editing, external content types, faceted search, large list support, document versioning, Silverlight, etc. The list goes on. However I think most people might be missing the most important feature that’s sitting right under their noses all this time. The most important feature of SharePoint? It’s called User Empowerment. Huh? What? Is that something I find in the Site Actions menu? Nope. It’s something that’s always been there in SharePoint, you just need to get the word out and support it. How many times have you had a team ask you for a team site (assuming you had SharePoint up and running). Or to create them a contact list. Or how long have you employed that guy in the corner who’s been copying and pasting content from Corporate Communications into the web from a Word document. Let’s stop the insanity. It doesn’t have to be this way. SharePoint’s strongest feature isn’t anything you can find in the Site Settings screen or Central Admin. It’s all about empowering your users and letting them take control of their content. After all, SharePoint really is a bunch of tools to allow users to collaborate on content isn’t it? So why are you stepping in as IT and helping the user every moment along the way. It’s like having to ask users to fill out a help desk ticket or call up the Windows team to create a folder on their desktop or rearrange their Start menu. This isn’t something IT should be spending their time doing nor is it something the users should be burdened with having to wait until their friendly neighborhood tech-guy (or gal) shows up to help them sort the icons on their desktop. SharePoint IS all about empowerment. Site owners can create whatever lists and libraries they need for their team, and if the template isn’t there they can always turn to my friend and yours, the Custom List. From that can spew forth approval tracking systems, new hire checklists, and server inventory. You’re only limited by your imagination and needs. Users should be able to create new sites as they need. Want a blog to let everyone know what your team is up to? Go create one, here’s how. What’s a blog you ask? Here’s what it is and why you would use one. SharePoint is the shift in the balance of power and you need, and an IT group, let go of certain responsibilities and let your users run with the tools. A power user who knows how to create sites and what features are available to them can help a team go from the forming stage to the storming stage overnight. Again, this all hinges on you as an IT organization and what you can and empower your users with as far as features go. Running with tools is great if you know how to use them, running with scissors not recommended unless you enjoy trips to the hospital. With Great Power comes Great Responsibility so don’t go out on Monday and send out a memo to the organization saying “This Bil guy says you peeps can do anything so here it is, knock yourself out” (for one, they’ll have *no* idea who this Bil guy is). This advice comes with the task of getting your users ready for empowerment. Whether it’s through some kind of internal training sessions, in-house documentation; videos; blog posts; on how to accomplish things in SharePoint, or full blown one-on-one sit downs with teams or individuals to help them through their problems. The work is up to you. Helping them along also should be part of your governance (you do have one don’t you?). Just because you have InfoPath client deployed with your Office suite, doesn’t mean users should just start publishing forms all over your SharePoint farm. There should be some governance behind that in what you’ll support and what is possible. The other caveat to all this is that SharePoint is not everything for everyone. It can’t cook you breakfast and impregnate your cat or solve world hunger. It also isn’t suited for every IT solution out there. It’s a horrible source control system (even though some people try to use it as such) and really can’t do financials worth a darn. Again, governance is key here and part of that governance and your responsibility in setting up and unleashing SharePoint into your organization is to provide users guidance on what should be in SharePoint and (more importantly) what should not be in SharePoint. There are boundaries you have to set where you don’t want your end users going as they might be treading into trouble. Again, this is up to you to set these constraints and help users understand why these pylons are there. If someone understands why they can’t do something they might have a better understanding and respect for those that put them there in the first place. Of course you’ll always have the power-users who want to go skiing down dead mans curve so this doesn’t work for everyone, but you can catch the majority of the newbs who don’t wander aimlessly off the beaten path. At the end of the day when all things are going swimmingly your end users should be empowered to solve the needs they have on a day to day basis and not having to keep bugging the IT department to help them create a view to show only approved documents. I wouldn’t go as far as business users building out full blown solutions and handing the keys to SharePoint Designer or (worse) Visual Studio to power-users might not be a path you want to go down but you also don’t have to lock up the SharePoint system in a tight box where users can’t use what’s there. So stop focusing on the shiny things in SharePoint and maybe consider making a shift to what’s really important. Making your day job easier and letting users get the most our of your technology investment.

  Read the article

• CodePlex Daily Summary for Sunday, September 02, 2012

  CodePlex Daily Summary for Sunday, September 02, 2012Popular ReleasesThisismyusername's codeplex page.: HTML5 Multitouch Example - Fruit Ninja in HTML5: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. This example isn't responsive enough, so I will be working on that, and it doesn't have great graphics, either. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but here the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixRuminate XNA 4.0 GUI: Release 1.1.1: Fixed bugs with Slider and TextBox. Added ComboBox.Confuser: Confuser build 76542: This is a build of changeset 76542.SharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...Home Access Plus+: v8.0: v8.0.0901.1830 RELEASE CHANGED TO BETA Any issues, please log them on http://www.edugeek.net/forums/home-access-plus/ This is full release, NO upgrade ZIP will be provided as most files require replacing. To upgrade from a previous version, delete everything but your AppData folder, extract all but the AppData folder and run your HAP+ install Documentation is supplied in the Web Zip The Quota Services require executing a script to register the service, this can be found in there install ...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3406 (September 2012): New features: Extended ReflectionClass libxml error handling, constants DateTime::modify(), DateTime::getOffset() TreatWarningsAsErrors MSBuild option OnlyPrecompiledCode configuration option; allows to use only compiled code Fixes: ArgsAware exception fix accessing .NET properties bug fix ASP.NET session handler fix for OutOfProc mode DateTime methods (WordPress posting fix) Phalanger Tools for Visual Studio: Visual Studio 2010 & 2012 New debugger engine, PHP-like debugging ...MabiCommerce: MabiCommerce 1.0.1: What's NewSetup now creates shortcuts Fix spelling errors Minor enhancement to the Map window.ScintillaNET: ScintillaNET 2.5.2: This release has been built from the 2.5 branch. Version 2.5.2 is functionally identical to the 2.5.1 release but also includes the XML documentation comments file generated by Visual Studio. It is not 100% comprehensive but it will give you Visual Studio IntelliSense for a large part of the API. Just make sure the ScintillaNET.xml file is in the same folder as the ScintillaNET.dll reference you're using in your projects. (The XML file does not need to be distributed with your application)....New ProjectsATSV: this is a student project for making a new silverlight UI Bookmark Collector: This project is a best practice example of how to use content items in DotNetNuke. It allows you to quickly and easily manage a listing of external links.BPVotingmachine: BP Vote SystemClean My Space: Sort your files in a fun and fast! With Clean My Space you can!CutePlatform: CutePlatform is a platform game based around the PlanetCute graphics pack from Daniel cook, make him a visit in www.lostgardem.comDancTeX: This project is targeting the integration of LaTeX into VisusalStudio. Epi Info™ Companion for Android: A mobile companion to the Epi Info™ 7 desktop tool for epidemiologic data collection and analysis.Flucene: Object Document Mapper for Lucene.Netfluentserializer: FluentSerializer is a library for .NET usable to create serialize/deserialize data through its fluent interface. The methods it creates are compiled.hongjiapp: hongjiappidealthings educational comprehensive administration system: ?????????????????????????????????????????????.Java Accounting Library: The project aims at providing a Financial Accounting Java Library which may be integrated to any other Java Application independent of its Backend Database.mycnblogs: mycnblogsNETPack: Lightweight and flexible packer for .NETRandom Useful Code: This project is where I will store various useful classes I have built over time. Only the code will be provided, no Library or the like.Suleymaniye Tavimi: Namaz vakitleri hesaplama uygulamasidir. Istenilen yer için hesaplama yapar.

  Read the article

• Top-Rated JavaScript Blogs

  - by Andreas Grech

  I am currently trying to find some blogs that talk (almost solely) on the JavaScript Language, and this is due to the fact that most of the time, bloggers with real life experience at work or at home development can explain more clearly and concisely certain quirks and hidden features than most 'Official Language Specifications' Below find a list of blogs that are JavaScript based (will update the list as more answers flow in): DHTML Kitchen, by Garrett Smith Robert's Talk, by Robert Nyman EJohn, by John Resig (of jQuery) Crockford's JavaScript Page, by Douglas Crockford Dean.edwards.name, by Dean Edwards Ajaxian, by various (@Martin) The JavaScript Weblog, by various SitePoint's JavaScript and CSS Page, by various AjaxBlog, by various Eric Lippert's Blog, by Eric Lippert (talks about JScript and JScript.Net) Web Bug Track, by various (@scunliffe) The Strange Zen Of JavaScript , by Scott Andrew Alex Russell (of Dojo) (@Eran Galperin) Ariel Flesler (@Eran Galperin) Nihilogic, by Jacob Seidelin (@llimllib) Peter's Blog, by Peter Michaux (@Borgar) Flagrant Badassery, by Steve Levithan (@Borgar) ./with Imagination, by Dustin Diaz (@Borgar) HedgerWow (@Borgar) Dreaming in Javascript, by Nosredna spudly.shuoink.com, by Stephen Sorensen Yahoo! User Interface Blog, by various (@Borgar) remy sharp's b:log, by Remy Sharp (@Borgar) JScript Blog, by the JScript Team (@Borgar) Dmitry Baranovskiy’s Web Log, by Dmitry Baranovskiy James Padolsey's Blog (@Kenny Eliasson) Perfection Kills; Exploring JavaScript by example, by Juriy Zaytsev DailyJS (@Ric) NCZOnline (@Kenny Eliasson), by Nicholas C. Zakas Which top-rated blogs am I currently missing from the above list, that you think should be imperative to any JavaScript developer to read (and follow) concurrently?

  Read the article

• How do I break down an NSTimeInterval into year, months, days, hours, minutes and seconds on iPhone?

  - by willc2

  I have a time interval that spans years and I want all the time components from year down to seconds. My first thought is to integer divide the time interval by seconds in a year, subtract that from a running total of seconds, divide that by seconds in a month, subtract that from the running total and so on. That just seems convoluted and I've read that whenever you are doing something that looks convoluted, there is probably a built-in method. Is there? I integrated Alex's 2nd method into my code. It's in a method called by a UIDatePicker in my interface. NSDate *now = [NSDate date]; NSDate *then = self.datePicker.date; NSTimeInterval howLong = [now timeIntervalSinceDate:then]; NSDate *date = [NSDate dateWithTimeIntervalSince1970:howLong]; NSString *dateStr = [date description]; const char *dateStrPtr = [dateStr UTF8String]; int year, month, day, hour, minute, sec; sscanf(dateStrPtr, "%d-%d-%d %d:%d:%d", &year, &month, &day, &hour, &minute, &sec); year -= 1970; NSLog(@"%d years\n%d months\n%d days\n%d hours\n%d minutes\n%d seconds", year, month, day, hour, minute, sec); When I set the date picker to a date 1 year and 1 day in the past, I get: 1 years 1 months 1 days 16 hours 0 minutes 20 seconds which is 1 month and 16 hours off. If I set the date picker to 1 day in the past, I am off by the same amount. Update: I have an app that calculates your age in years, given your birthday (set from a UIDatePicker), yet it was often off. This proves there was an inaccuracy, but I can't figure out where it comes from, can you?

  Read the article

• How to prevent buffer overflow in C/C++?

  - by alexpov

  Hello, i am using the following code to redirect stdout to a pipe, then read all the data from the pipe to a buffer. I have 2 problems: first problem: when i send a string (after redirection) bigger then the pipe's BUFF_SIZE, the program stops responding (deadlock or something). second problem: when i try to read from a pipe before something was sent to stdout. I get the same response, the program stops responding - _read command stuck's ... The issue is that i don't know the amount of data that will be sent to the pipe after the redirection. The first problem, i don't know how to handle and i'll be glad for help. The second problem i solved by a simple workaround, right after the redirection i print space character to stdout. but i guess that this solution is not the correct one ... #include <fcntl.h> #include <io.h> #include <iostream> #define READ 0 #define WRITE 1 #define BUFF_SIZE 5 using namespace std; int main() { int stdout_pipe[2]; int saved_stdout; saved_stdout = _dup(_fileno(stdout)); // save stdout if(_pipe(stdout_pipe,BUFF_SIZE, O_TEXT) != 0 ) // make a pipe { exit(1); } fflush( stdout ); if(_dup2(stdout_pipe[1], _fileno(stdout)) != 0 ) //redirect stdout to the pipe { exit(1); } ios::sync_with_stdio(); setvbuf( stdout, NULL, _IONBF, 0 ); //anything sent to stdout goes now to the pipe //printf(" ");//workaround for the second problem printf("123456");//first problem char buffer[BUFF_SIZE] = {0}; int nOutRead = 0; nOutRead = _read(stdout_pipe[READ], buffer, BUFF_SIZE); //second problem buffer[nOutRead] = '\0'; // reconnect stdout if (_dup2(saved_stdout, _fileno(stdout)) != 0 ) { exit(1); } ios::sync_with_stdio(); printf("buffer: %s\n", buffer); } Thanks, Alex

  Read the article

• forkpty - socket

  - by Alexxx

  Hi, I'm trying to develop a simple "telnet/server" daemon which have to run a program on a new socket connection. This part working fine. But I have to associate my new process to a pty, because this process have some terminal capabilities (like a readline). The code I've developped is (where socketfd is the new socket file descriptor for the new input connection) : int masterfd, pid; const char *prgName = "..."; char *arguments[10] = ....; if ((pid = forkpty(&masterfd, NULL, NULL, NULL)) < 0) perror("FORK"); else if (pid) return pid; else { close(STDOUT_FILENO); dup2(socketfd, STDOUT_FILENO); close(STDIN_FILENO); dup2(socketfd, STDIN_FILENO); close(STDERR_FILENO); dup2(socketfd, STDERR_FILENO); if (execvp(prgName, arguments) < 0) { perror("execvp"); exit(2); } } With that code, the stdin / stdout / stderr file descriptor of my "prgName" are associated to the socket (when looking with ls -la /proc/PID/fd), and so, the terminal capabilities of this process doesn't work. A test with a connection via ssh/sshd on the remote device, and executing "localy" (under the ssh connection) prgName, show that the stdin/stdout/stderr fd of this process "prgName" are associated to a pty (and so the terminal capabilities of this process are working fine). What I am doing wrong? How to associate my socketfd with the pty (created by forkpty) ? Thank Alex

  Read the article

• Help with editing data in entity framework.

  - by Levelbit

  Title of this question is simple because there is no an easy explanation for what I'm trying to ask you. I hope you'll understand in the end :). I have to tables in my database: Company and Location (relationship:one to many) and corresponding entity sets. In my wpf application I have some datagrid which I want to fill with locations and to be able to edit every row in separate window as some form of details view (so I don't want to edit my data in datagrid). I did this by accessing Location entity from selected row and creating a new Location entity and then I copy properties from original entity to newly created. Something like cloning the object. After editing if I press OK changed data is copied to original object back, and if I press Cancel nothing happens. Of course, you probably thinking I could use NoTracking option and AttachAsModified method as was mentioned as solution in some earlier questions(see:http://stackoverflow.com/questions/803022/changing-entities-in-the-entityframework) by Alex James, but lets say I had some problems about that and I have my own reasons for doing this. Finally, because navigation property(Company) of my location entity is assigned to newly created location object(during cloning) from some reason in object context additional object as copy of object I want to edit from datagrid is created without my will(similar problem :http://blogs.msdn.com/alexj/archive/2009/12/02/tip-47-how-fix-up-can-make-it-hard-to-change-relationships.aspx). So, when I do ObjectContext.SaveChanges it inserts additional row of data into my database table Location, the same as the one i wanted to edit. I read about sth like this, but I don't quite understand why is that and how to block or override this. I hope I was clear as I could. Please, solutions or some other ideas.

  Read the article

< Previous Page | 96 97 98 99 100 101 102 103  | Next Page >