Search Results

Search found 3047 results on 122 pages for 'swap freeze'.

Page 100/122 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107 | Next Page >

Extend RAID 1 (HP SmartArray P410i) running Linux

- by Oliver

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) (sn: removed) array A (SAS, Unused Space: 1335535 MB) logicaldrive 1 (279.4 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1 TB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1 TB, OK) Initially there were two 300GB disks that got replaced by 1TB disks and I now have to extend the logical volume to use that extra space. However, when trying to do so I get the following warning: => ctrl slot=0 ld 1 modify size=max Warning: Extension may not be supported on certain operating systems. Performing extension on these operating systems can cause data to become inaccessible. See ACU documentation for details. Continue? (y/n) Is it safe to say yes or am I at risk of corrupting the file system / loosing data? Rearranging and extending the file system afterwards shouldn't be an issue as I can take the server offline and boot from a gparted live disk. Here's the config of the RAID controller in use: => ctrl all show detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: removed RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: Rev C Firmware Version: 5.12 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: False Drive Write Cache: Disabled SATA NCQ Supported: True And the partition table: Number Start End Size Type File system Flags 1 1049kB 274GB 274GB primary ext4 boot 2 274GB 300GB 25.8GB extended 5 274GB 300GB 25.8GB logical linux-swap(v1)

Read the article
Apache2 slow serving static while healthy

- by user45339

My Apache status looks like; 201 requests/sec - 98.8 kB/second - 504 B/request 85 requests currently being processed, 345 idle workers _____CCW_C_____C__C__C_R____C_WC_________C__C____CW__C__CCC_____ __C____W______C___C___CW__C_C______C__W_C__C_____CCC____C______R CC_C_______C___C____C______________C______C__C________________C_ ___________________C______________________C_______C___C_____C___ CC____C__C___R_____C_C_CC__________C___C___________R____C_C_C___ ______C______W_W__W___C____________________C__WCC__R__R_C_______ R__RC________________________C___R____W__C____.................. .................................................... Server load is average 2 on a 4 core machine. IO utilization is 10-15% and doesn't have many jumps over 70%. Machine has almost 4 gb free and uses 0 swap. The site on the machine is a PHP site. All PHP code is optimized and fast mostly when it gets accessed, however sometimes requests get stuck. Stuck meaning; no response for at least 10 sec. We debugged the PHP code, but it is quite optimal and fast. We spend a lot of time on it until we decided to test the requesting of: <html><body>test</body></html> test.html page. This static resource also gets 'stuck' in the same manner the php pages get 'stuck'. How is the possible given the health of the system? I tested the network, but, when the PHP shows 'slowness' in the site monitoring, the html test files also take (far longer) than 10 sec to load using; time lynx -dump http://127.0.0.1/test.html We are kind of desperate to solve this problem, but we cannot seem to tackle it.

Read the article
a disk read error occurred

- by kellogs

Hi, ¨a disk read error occurred¨ appears on screen after choosing to boot into Windows XP from GRUB. [root@localhost linux]# fdisk -lu Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x48424841 Device Boot Start End Blocks Id System /dev/sda1 63 204214271 102107104+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 204214272 255606783 25696256 af HFS / HFS+ Partition 2 does not end on cylinder boundary. /dev/sda3 255606784 276488191 10440704 c W95 FAT32 (LBA) Partition 3 does not end on cylinder boundary. /dev/sda4 276490179 312576704 18043263 5 Extended /dev/sda5 * 276490240 286709759 5109760 83 Linux /dev/sda6 286712118 310488254 11888068+ b W95 FAT32 /dev/sda7 310488318 312576704 1044193+ 82 Linux swap / Solaris sda is a 160GB hard disk with quite a few partitions and 3 OSes installed. I am able to boot into Linux and Mac OS fine, but not into Windows anymore. The Windows system is located on /dev/sda1. I can not recall how exactly have I used testdisk but it once said that ¨The harddisk /dev/sda (160GB / 149 GB) seems too small! (< 172GB / 157GB)¨ or something simillar. So far I have tried to ¨fixboot¨ and ¨chkdsk¨ from a recovery console on the affected windows partition (/dev/sda1), the plug off power cord for 15 seconds trick, reinstalling GRUB, repairing the MFT and boot sector of the affected partition via testdisk, what next please ? Thank you!

Read the article
Changes to grub in ubuntu 10

- by jdege

I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

Read the article
Dual-booting Ubuntu and Pardus with GRUB2...Pardus no show?

- by Ibn Ali al-Turki

Hello all, I have Ubuntu 10.10 installed and used to dual-boot Fedora, but I replaced Fedora with Pardus. After the install, I went into ubuntu, and did a sudo update-grub. It detected my Pardus 2011 install there. When I rebooted, it did not show up in my grub2 menu however. I went back to Ubuntu and did it again...then checked the grub.cfg, and it is not there. I have read that Pardus uses a grub legacy. How can I get Pardus into my grub2 menu? Thanks! sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd9b3496e Device Boot Start End Blocks Id System /dev/sda1 * 1 15197 122067968 83 Linux /dev/sda2 36394 60802 196059757 5 Extended /dev/sda3 15197 30394 122067968 83 Linux /dev/sda5 36394 59434 185075308 7 HPFS/NTFS /dev/sda6 59434 60802 10983424 82 Linux swap / Solaris Partition table entries are not in disk order and update-grub Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic Found memtest86+ image: /boot/memtest86+.bin Found Pardus 2011 (2011) on /dev/sda3 Yet after this, I go to grub.cfg, and Pardus is not there.

Read the article
network latency, TCP and UDP packets

- by user115848

Hello recently my network has started to cause me lots of problems. I have a cable modem, connected to a tp-link router (with some port forwarding). Everything was working fine then i started to get lots of udp (port 53) "UNREPLIED" logs in the router. Now there are tcp UNREPLIED logs too. This is causing lots of latency and failed connections when trying to connect to different internet sites. Also, we run an openfire server for spark connections, and I believe its causing connectivity issues for some users who are trying to connect using Spark (some people connect fine, others don't). Please see screen shot below for packet logs. It has to be something internally, as I connected straight to the comcast modem and i was able to connect to the internet and various sites as normal. I tried to swap out the router with a different and got the same issue. I scanned both my internal dns servers for viruses or malware and it came up empty. Another anomaly is that when i try to connect to www.cnn.com, i get redirected to the different site. I scanned my own machine for hijacks. Not sure if this is related to the networking issue. Please let me know if you have any ideas for troubleshooting.

Read the article
centos TCP/IP connection very slow

- by yuli chika

I have a VSP (centos6.1 64bit) with 4gb ram. It always runs well, but in recent few days, the server become slowly. open a small css file need 22 seconds(2kb). tested in home/office/phone with (IE,chrome,safari,firefox). see in firebug networking DNS Lookup ?4?ms Connecting ?21.18?s Sending 1?ms Waiting ?115?ms Receiving ?9?ms The connection cost 21.18 seconds I have checked all the log file, there have no error. top commond, still have free memory. top - 00:23:15 up 8 days, 3:57, 1 user, load average: 3.60, 3.42, 3.83 Tasks: 221 total, 4 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 19.3%us, 3.2%sy, 0.0%ni, 76.1%id, 1.4%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4194304k total, 3247724k used, 946580k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 32357 mysql 15 0 3710m 835m 6268 S 34.5 20.4 39:14.40 mysqld 9780 apache 15 0 442m 59m 12m S 33.2 1.4 0:05.69 httpd 9842 apache 15 0 403m 26m 10m S 16.9 0.7 0:01.23 httpd 9847 apache 15 0 412m 45m 22m R 15.3 1.1 0:01.00 httpd 9834 apache 15 0 426m 46m 11m R 13.0 1.1 0:02.22 httpd 9891 apache 15 0 407m 43m 19m S 8.0 1.1 0:00.33 httpd 9845 apache 15 0 414m 51m 24m S 6.0 1.3 0:01.53 httpd 9827 apache 15 0 402m 28m 11m S 3.3 0.7 0:02.69 httpd 9768 apache 16 0 414m 51m 24m S 3.0 1.3 0:06.51 httpd 9889 root 15 0 211m 12m 8160 S 2.7 0.3 0:00.32 php 9702 apache 15 0 415m 55m 26m S 1.7 1.4 0:10.67 httpd 9844 apache 15 0 413m 47m 21m S 1.7 1.2 0:01.21 httpd 9697 apache 15 0 414m 51m 24m S 1.3 1.3 0:11.05 httpd 9778 apache 15 0 414m 53m 25m S 1.3 1.3 0:05.38 httpd 9772 apache 15 0 414m 51m 23m R 0.7 1.3 0:05.04 httpd 9823 apache 15 0 415m 50m 23m S 0.7 1.2 0:03.97 httpd 9837 apache 15 0 402m 27m 11m S 0.3 0.7 0:01.04 httpd Then, how to check where is the problem and fixed it? I haven't change and config files in these days. Thanks.

Read the article
SQL 2008 SP1 crashing almost daily

- by matijake

Hey, almost every day our new DB crashes. It is virtual server residing on same hardware as 5 other servers, two of them beeing identical MS SQL2008sp1 and two Oracle 11g's so I can pretty much rule out hardware issues. Server has dedicated local LUN, 4vCPU and 8GB memory with 2GB windows swap file. It runs 4 instances. Primary instance is limited to 5GB memory and paralelism set to 4 running on MS SQL 2008 SP1 @ Windows Server 2008 Enterprise R2 x64. Only that primary instance is crashing. After it crashes nothing can connect to it, it's even impossible to shut it down through service manager. What I found in logs is: ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\LOG\SQLDump0081.txt SqlDumpExceptionHandler: Process 4788 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server i s terminating this process. Whole log can be seen at: http://kabl.org/files/SQLDump0081.txt second crash log made second later at: http://kabl.org/files/SQLDump0082.txt I have analyzed mini crashdump with Microsoft tools, but no promising results. If it can help, here it is: http://kabl.org/files/SQLDump0081.mdmp Any ideas are greatly welcome, since it is becoming quite a pain in the ass to restart server almost every day :) Regrads, -Matija

Read the article
Opening an existing process

- by Grasper

I am using Eclipse in Linux through a remote connection (xrdp). My internet got disconnected, so I got disconnected from the server while eclipse was running. Now I logged in again, and I do the "top" command I can see that eclipse is running and still under my user name. Is there some way I can bring that process back into my view (I do not want to kill it because I am in the middle of checking in a large swath of code)? It doesnt show up on the bottom panel after I logged in again. Here is the "top" output: /home/mclouti% top top - 08:32:31 up 43 days, 13:06, 29 users, load average: 0.56, 0.79, 0.82 Tasks: 447 total, 1 running, 446 sleeping, 0 stopped, 0 zombie Cpu(s): 6.0%us, 0.7%sy, 0.0%ni, 92.1%id, 1.1%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 3107364k total, 2975852k used, 131512k free, 35756k buffers Swap: 2031608k total, 59860k used, 1971748k free, 817816k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13415 mclouti 15 0 964m 333m 31m S 21.2 11.0 83:12.96 eclipse 16040 mclouti 15 0 2608 1348 888 R 0.7 0.0 0:00.12 top 31395 mclouti 15 0 29072 20m 8524 S 0.7 0.7 611:08.08 Xvnc 2583 root 20 0 898m 2652 1056 S 0.3 0.1 139:26.82 automount 28990 postgres 15 0 13564 868 304 S 0.3 0.0 26:33.36 postgres 28995 postgres 16 0 13808 1248 300 S 0.3 0.0 6:54.95 postgres 31440 mclouti 15 0 3072 1592 1036 S 0.3 0.1 6:01.54 gam_server 1 root 15 0 2072 524 496 S 0.0 0.0 0:03.00 init 2 root RT -5 0 0 0 S 0.0 0.0 0:04.53 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:01.72 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:04.33 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/2

Read the article
Laptop accessories for mobile warrior (light power adapter & case/bag)

- by wonsungi

Lugging my X301 between work and home, I realized my laptop's accessories weigh more than the laptop itself! I'm ordering a 2nd AC power adapter so I don't even have to carry one at all, but I may as well get the lightest one possible. My X301 came with a pretty svelt 65W power adapter, but can anyone suggest a lighter power adapter or confirm the weights I've found below? mass vol dimensions W Model ---- ------- ----------- --- ------------------- 210g 149cm^3 108x46x30mm 65W Coolermaster [NA 65] 244g 189cm^3 140x75x18mm 65W ThermalTake [ADP65W0001] 260g 130cm^3 104x43x29mm 65W Lenovo (came with X301) 326g 198cm^3 145x76x18mm 95W Coolermaster [SNA 95] 330g 180cm^3 150x60x20mm 90W Kensington USB [K38030US] Apple's 60W power adapter seems much smaller/lighter than the PC products listed above, so I think a better PC power adapter could exist. There are much smaller 45W "netbook" adapters, but are these too weak for my X301? I would not mind if it just meant the battery couldn't charge while the laptop was on, but I am afraid there will be worse consequences. Also, I have decided to swap my Logitech Kinetik briefcase for a Tom Bihn Ristretto. Less protection, but much lighter, less bulky, and easier to carry. Any suggestions for better laptop cases/bags?

Read the article
Kickstart CentOS 6 prompting for TCP/IP with network set to DHCP

- by Andy Shinn

I am trying to stop my kickstart CentOS install prompting me for TCP/IP information. After I click through this prompt (keeping IPv4 and IPv6 to their defaults) the installation continues and completes just fine. Below is my kickstart file: # Andy's super awesome VM kickstart file install url --url=http://mirrors.kernel.org/centos/6/os/x86_64 lang en_US.UTF-8 keyboard us text %include /tmp/network.ks rootpw --iscrypted $6$RA8DyrNTsVJkGIgY$ohZ62HHiOjNnn1yDMZlIu3lQ63D3plGPcbVZtPKE8Oq6Z.IGUgN.kNLkxs/ZymZuluRDWsW2eey5zLOl2G3mp. firewall --service=ssh authconfig --enableshadow --passalgo=sha512 selinux --disabled timezone America/Los_Angeles bootloader --location=mbr --driveorder=vda --append="crashkernel=auto rhgb quiet" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work zerombr clearpart --all --drives=vda --initlabel part /boot --fstype=ext4 --size=500 part pv.253002 --grow --size=1 volgroup vg1 --pesize=4096 pv.253002 logvol / --fstype=ext4 --name=lv_root --vgname=vg1 --grow --size=1024 --maxsize=51200 logvol swap --name=lv_swap --vgname=vg1 --grow --size=4032 --maxsize=4032 repo --name="CentOS" --baseurl=http://mirrors.kernel.org/centos/6/os/x86_64 --cost=100 repo --name="Puppet Labs Products" --baseurl=http://yum.puppetlabs.com/el/6/products/x86_64 repo --name="Puppet Labs Dependencies" --baseurl=http://yum.puppetlabs.com/el/6/dependencies/x86_64 repo --name="EyeFi" --baseurl=http://flexo.eye.fi/6/eye-fi-api %packages @core @server-policy puppet facter %end %pre --erroronfail #!/bin/bash for x in `cat /proc/cmdline`; do case $x in SERVERNAME*) eval $x echo "network --onboot yes --device eth0 --bootproto dhcp --hostname ${SERVERNAME}.eye.fi" /tmp/network.ks ;; esac; done %end %post puppet agent --waitforcert 10 --onetime --no-daemon --pluginsync --server puppet.eye.fi %end reboot My kernel arguments are in this following virt-install command that I use to start the install: virt-install -n zabbix -r 2048 --vcpus=2 -l http://mirrors.kernel.org/centos/6/os/x86_64 --disk /dev/vg_inf1/zabbix --network bridge=br85 --initrd-inject=/home/ashinn/vm_kickstart --extra-args "ks=file:/vm_kickstart SERVERNAME=zabbix" --autostart During the install, I can pull up a console on the second terminal and verify the contents of /tmp/network.ks are: network --onboot=yes --bootproto=dhcp --ipv6=auto --hostname=jenkins2.mydomain.com Why might Anaconda be prompting for the TCP/IP settings when they are already set to DHCP?

Read the article
High apache load but zero traffic

- by Adie

I have a problem with new server.. I use VPS Centos with 1GB of ram and I use wordpress CMS. The traffic <100 visitor/hour, but the apache have high load and make the server hang with zero free of ram and can't connect through ssh. I should reboot the vps to make it works here is the load on Apache looks like Tasks: 66 total, 1 running, 65 sleeping, 0 stopped, 0 zombie Cpu(s): 1.6%us, 12.3%sy, 0.0%ni, 48.1%id, 23.0%wa, 4.8%hi, 10.2%si, 0.0% Mem: 1018776k total, 116620k used, 902156k free, 1236k buffers Swap: 1048568k total, 1013052k used, 35516k free, 26628k cached 2949 apache 20 0 459m 42m 3732 D 3.0 4.2 0:09.23 httpd 2959 apache 20 0 460m 29m 3744 D 2.0 3.0 0:02.72 httpd 2968 apache 20 0 460m 26m 3808 D 2.0 2.6 0:02.27 httpd 2972 apache 20 0 460m 24m 3784 D 2.0 2.5 0:02.44 httpd 2986 apache 20 0 460m 29m 3784 R 2.0 2.9 0:02.40 httpd 2969 apache 20 0 458m 29m 3864 D 1.6 3.0 0:02.63 httpd 2974 apache 20 0 460m 25m 3820 D 1.6 2.6 0:02.43 httpd 2990 apache 20 0 460m 23m 3920 D 1.6 2.4 0:02.36 httpd 2994 apache 20 0 460m 31m 3756 D 1.6 3.2 0:02.62 httpd 2956 apache 20 0 460m 26m 3740 D 1.3 2.7 0:02.73 httpd 2957 apache 20 0 465m 22m 3644 D 1.3 2.3 0:02.80 httpd 2967 apache 20 0 458m 24m 3764 D 1.3 2.5 0:02.60 httpd 2970 apache 20 0 463m 25m 3764 D 1.3 2.6 0:03.07 httpd 2971 apache 20 0 451m 22m 3792 D 1.3 2.3 0:02.47 httpd 2973 apache 20 0 458m 25m 3768 D 1.3 2.6 0:02.52 httpd 2987 apache 20 0 465m 20m 3772 D 1.3 2.1 0:03.02 httpd But sometimes the server have uptime more than 5-10hrs but after that the problems start

Read the article
Replacing all disks in a non-OS RAID 5 volume

- by molecule

Hi all, We currently have a server with 8 x HDD slots. It is a HP DL380G5 with a P400 controller. 2 x HDD are in a RAID 1+0 config and this hosts the OS. 6 x HDD are in a RAID 5 config and holds an Oracle DB. Basically the RAID 5 volume is running out of space and we would like to swap all 6 with higher capacity disks. Excuse my ignorance as I am pretty new to this... I believe we will need to backup the data, delete the RAID volume, insert the new disks, recreate the volume, and restore the data. 2 questions: Do we need to worry about the OS partition or is it completely independent so we can simply take out the 6 and insert 6 new disks and get the controller to recognize the 6 new disks and form a new RAID 5 volume? We should not need to reinstall OS or Oracle correct? Since we are going to restore the data on the volume from another source (our vendor will take care of this) but we would like to keep the existing data on the 6 disks just in case we run into issues and want to fall back, is this possible? Thanks in advance.

Read the article
Libvirt / QEmu Machine Fails and Refuses Restart Because of Memory Allocation Errors

- by Elmar Weber

I'm having a problem with libvirt. On a system restart all virtual machines (VMs) are started without a problem and keep running. Then at some point in time a set of machines shuts down according to their log. When I try to restart the machine, I'm getting an error that the memory allocation failed, although more than enough memory is free. server ~ # free total used free shared buffers cached Mem: 16176648 16025476 151172 0 285432 950300 -/+ buffers/cache: 14789744 1386904 Swap: 0 0 0 server ~ # virsh start zimbra error: Failed to start domain zimbra error: Unable to read from monitor: Connection reset by peer server ~ # tail -n 4 /var/log/libvirt/qemu/zimbra.log LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 3072 -smp 2,sockets=2,cores=1,threads=1 -name zimbra -uuid d05ddb7a-83c4-a77b-d8bc-a322648520cf -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/zimbra.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/zimbra.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -netdev tap,fd=19,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:21:a9:ad,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 192.168.1.2:25 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/2 Failed to allocate 3221225472 B: Cannot allocate memory 2012-07-06 08:42:56.076+0000: shutting down server ~ # uname -a Linux server 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The system is a Ubuntu 12.04 server. The problem seems to occurs since the last restart, which was due to a number of package upgrades and a kernel upgrade. I tried booting with the previous kernel, the problem persists. I was not able to pinpoint an exact event when the machines fail, they do it at nearly the same time. The last time a duplicity job was running, this was not always the case however. Any suggestions on how to debug this? Best regards, elm

Read the article
XNA RTS A* pathfinding issues

- by Slayter

I'm starting to develop an RTS game using the XNA framework in C# and am still in the very early prototyping stage. I'm working on the basics. I've got unit selection down and am currently working on moving multiple units. I've implemented an A* pathfinding algorithm which works fine for moving a single unit. However when moving multiple units they stack on top of each other. I tried fixing this with a variation of the boids flocking algorithm but this has caused units to sometimes freeze and get stuck trying to move but going no where. Ill post the related methods for moving the units below but ill only post a link to the pathfinding class because its really long and i don't want to clutter up the page. These parts of the code are in the update method for the main controlling class: if (selectedUnits.Count > 0) { int indexOfLeader = 0; for (int i = 0; i < selectedUnits.Count; i++) { if (i == 0) { indexOfLeader = 0; } else { if (Vector2.Distance(selectedUnits[i].position, destination) < Vector2.Distance(selectedUnits[indexOfLeader].position, destination)) indexOfLeader = i; } selectedUnits[i].leader = false; } selectedUnits[indexOfLeader].leader = true; foreach (Unit unit in selectedUnits) unit.FindPath(destination); } foreach (Unit unit in units) { unit.Update(gameTime, selectedUnits); } These three methods control movement in the Unit class: public void FindPath(Vector2 destination) { if (path != null) path.Clear(); Point startPoint = new Point((int)position.X / 32, (int)position.Y / 32); Point endPoint = new Point((int)destination.X / 32, (int)destination.Y / 32); path = pathfinder.FindPath(startPoint, endPoint); pointCounter = 0; if (path != null) nextPoint = path[pointCounter]; dX = 0.0f; dY = 0.0f; stop = false; } private void Move(List<Unit> units) { if (nextPoint == position && !stop) { pointCounter++; if (pointCounter <= path.Count - 1) { nextPoint = path[pointCounter]; if (nextPoint == position) stop = true; } else if (pointCounter >= path.Count) { path.Clear(); pointCounter = 0; stop = true; } } else { if (!stop) { map.occupiedPoints.Remove(this); Flock(units); // Move in X ********* TOOK OUT SPEED ********** if ((int)nextPoint.X > (int)position.X) { position.X += dX; } else if ((int)nextPoint.X < (int)position.X) { position.X -= dX; } // Move in Y if ((int)nextPoint.Y > (int)position.Y) { position.Y += dY; } else if ((int)nextPoint.Y < (int)position.Y) { position.Y -= dY; } if (position == nextPoint && pointCounter >= path.Count - 1) stop = true; map.occupiedPoints.Add(this, position); } if (stop) { path.Clear(); pointCounter = 0; } } } private void Flock(List<Unit> units) { float distanceToNextPoint = Vector2.Distance(position, nextPoint); foreach (Unit unit in units) { float distance = Vector2.Distance(position, unit.position); if (unit != this) { if (distance < space && !leader && (nextPoint != position)) { // create space dX += (position.X - unit.position.X) * 0.1f; dY += (position.Y - unit.position.Y) * 0.1f; if (dX > .05f) nextPoint.X = nextPoint.X - dX; else if (dX < -.05f) nextPoint.X = nextPoint.X + dX; if (dY > .05f) nextPoint.Y = nextPoint.Y - dY; else if (dY < -.05f) nextPoint.Y = nextPoint.Y + dY; if ((dX < .05f && dX > -.05f) && (dY < .05f && dY > -.05f)) stop = true; path[pointCounter] = nextPoint; Console.WriteLine("Make Space: " + dX + ", " + dY); } else if (nextPoint != position && !stop) { dX = speed; dY = speed; Console.WriteLine(dX + ", " + dY); } } } } And here's the link to the pathfinder: https://docs.google.com/open?id=0B_Cqt6txUDkddU40QXBMeTR1djA I hope this post wasn't too long. Also please excuse the messiness of the code. As I said before this is early prototyping. Any help would be appreciated. Thanks!

Read the article
0% CPU in top for all processes, but load average > 1

- by chrisdew

On two different servers (with Ubuntu 12.04LTS AMD64) I have seen the following behaviour: op - 10:50:05 up 305 days, 21:17, 1 user, load average: 1.94, 2.52, 2.97 Tasks: 141 total, 2 running, 139 sleeping, 0 stopped, 0 zombie Cpu(s): 41.5%us, 6.5%sy, 0.0%ni, 51.8%id, 0.0%wa, 0.2%hi, 0.1%si, 0.0%st Mem: 8178432k total, 5753740k used, 2424692k free, 159480k buffers Swap: 15625208k total, 0k used, 15625208k free, 4905292k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 20 0 23928 2072 1216 S 0 0.0 0:56.42 init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:01.23 migration/0 4 root 20 0 0 0 0 S 0 0.0 2:39.82 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:02.99 migration/1 7 root 20 0 0 0 0 S 0 0.0 2:32.15 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root RT 0 0 0 0 S 0 0.0 0:11.67 migration/2 10 root 20 0 0 0 0 S 0 0.0 29:00.34 ksoftirqd/2 The server is working fine, but top shows all processes as using 0% CPU. A reboot fixed this on an earlier machine, but I haven't yet tried it on this one. I have tried top several times, and so am sure that I haven't accidentally pressed '<' or '' to sort by a different column. Sorting the process list by all of the available columns, stills shows 0% CPU for all displayed processes. What is going on? If this a kernel bug? Update: If I use top -p <PID> for a know, busy process, top still displays 0% CPU for that process.

Read the article
virtual memory commited

- by vinu

After a server bounce happens, and after around 40-45 days time period, we receive continuous “Committed Virtual Memory” alerts which indicates the usage of swap space in the magnitude of 4GB This also causes the application to perform very slowly and experience a number of stalled transactions. Server Setup: 4 Tomcat Servers (version 7.0.22) that are load balanced (not clustered) by 2 Apache Servers. And the Apache servers themselves supply static content and routing to these 4 tomcat servers. Java Runtime Version: java version "1.6.0_30" Java(TM) SE Runtime Environment (build 1.6.0_30-b12) Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode Memory Startup Parameters: MEMORY_OPTIONS="-Xms1024m -Xmx1024m -Xss192k -XX:MaxGCPauseMillis=500 -XX:+HeapDumpOnOutOfMemoryError -XX:MaxPermSize=256m -XX:+CMSClassUnloadingEnabled" Monitoring – Wily monitoring is available in all the production servers that monitors key server parameters and sends out configurable alert emails based on pre defined settings. Note: Each of the servers also has two other separate tomcat domains that run different applications Investigated area: There is no Heap Memory Leak and the GC is running fine without any issues over any period of time The current busy thread count corresponds directly to the application usage – weekends and nights have lesser no. of threads compared to business hours ThreadLocal uses a WeakReference internally. If the ThreadLocal is not strongly referenced, it will be garbage-collected, even though various threads have values stored via that ThreadLocal. Additionally, ThreadLocal values are actually stored in the Thread; if a thread dies, all of the values associated with that thread through a ThreadLocal are collected. If you have a ThreadLocal as a final class member, that's a strong reference, and it cannot be collected until the class is unloaded. But this is how any class member works, and isn't considered a memory leak. The cited problem only comes into play when the value stored in a ThreadLocal strongly references that ThreadLocal—sort of a circular reference. In this case, the value (a SimpleDateFormat), has no backwards reference to the ThreadLocal. There's no memory leak in this code. Can anyone please let me know what could be the cause of this and what to be monitored?

Read the article
Apache process consumes too much CPU

- by Niro

I have an ubuntu apache/php server running php doing appx 100 hits/sec and a PHP cron running in the background. I get occasionally high CPU load on one of the Apache processes which stays high regardless of traffic or cron activity. It seems to me that its stuck in some kind of loop or something. Below you will find the top and strace info. How can I find where the bad code is and what causes this? top - 14:45:24 up 3 days, 3:38, 1 user, load average: 5.10, 5.88, 5.85 Tasks: 163 total, 5 running, 158 sleeping, 0 stopped, 0 zombie Cpu(s): 47.8%us, 18.5%sy, 0.0%ni, 10.2%id, 0.0%wa, 0.0%hi, 1.8%si, 21.6%st Mem: 7885012k total, 3858484k used, 4026528k free, 177444k buffers Swap: 0k total, 0k used, 0k free, 1037868k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10736 www-data 20 0 769m 559m 478m R 69 7.3 29:08.30 apache2 10844 www-data 20 0 824m 601m 492m S 17 7.8 4:37.90 apache2 1016 root 20 0 242m 25m 4628 S 6 0.3 162:07.93 scalarizr 9030 www-data 20 0 879m 619m 492m S 4 8.0 5:06.82 apache2 20216 www-data 20 0 747m 228m 170m S 4 3.0 0:01.94 apache2 10807 www-data 20 0 814m 584m 492m S 3 7.6 4:54.10 apache2 10455 www-data 20 0 831m 574m 492m S 3 7.5 4:32.65 apache2 10495 www-data 20 0 849m 592m 492m S 3 7.7 4:41.10 apache2 10884 www-data 20 0 840m 581m 492m S 3 7.6 4:25.06 apache2 ^CProcess 10736 detached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 74.55 0.148052 1 109755 gettimeofday 25.36 0.050370 0 164634 clock_gettime 0.09 0.000178 0 54878 poll ------ ----------- ----------- --------- --------- ---------------- 100.00 0.198600 329267 total root@ec2-67-202-54-36:~# ^C

Read the article
No clue for high load average on top

- by Oz.

We have several machines on Amazon (ec2) of the type c1.xlarge with 16 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st(see below). Mem is about 1.5GB free. Any idea what could it be, or where else can we check? Many thanks for the help. # # top # top - 07:57:42 up 4:18, 1 user, load average: 1.36, 1.45, 1.47 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu(s): 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7120092k total, 5644920k used, 1475172k free, 532888k buffers Swap: 0k total, 0k used, 0k free, 3463936k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1557 mysql 20 0 1829m 374m 6448 S 14.3 5.4 11:15.09 mysqld 6655 apache 20 0 416m 49m 3744 S 9.3 0.7 0:04.85 httpd 27683 apache 20 0 421m 54m 3708 S 9.0 0.8 0:00.99 httpd 6682 apache 20 0 424m 57m 3788 S 8.3 0.8 0:03.81 httpd 16816 apache 20 0 419m 51m 3760 S 4.3 0.7 0:04.09 httpd 22182 apache 20 0 417m 50m 3756 S 1.7 0.7 0:06.34 httpd 219 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/7:1 699 root 20 0 0 0 0 S 0.3 0.0 0:00.40 kworker/3:1 1 root 20 0 19376 1508 1212 S 0.0 0.0 0:00.29 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.71 ksoftirqd/0

Read the article
Move an SSD with Windows 7 to a new PCIe SATA controller card

- by Shevek

This is my current setup: Abit AB9 QuadGT motherboard which has an Intel P965 chipset with Intel ICH8 SATA Rev. 2.0 controller Kingston HyperX 3K 120GB SSD which supports SATA Rev. 3.0 Windows 7 Ultimate x64 For some reason I was unable to install Windows with the controller set in AHCI mode, even with the correct driver from Intel so it is currently in IDE mode. Due to the ICH8 controller being SATA Rev 2.0 and running in IDE mode, the SSD is operating well under it's published read/write speeds. I have ordered an Asus U3S6 controller card to add both SATA Rev. 3.0 and USB 3.0 to my computer. The motherboard does have a PCIe x4 slot available so I will hopefully achieve the full potential of my SSD. My question is this - am I able to swap the SSD over to the controller card from the motherboard controller without having to clean install Windows? I am hoping that all I will need to do is ensure that the controller card drivers are available to Windows and set the registry as per this KB article. Will this work or should I perform a clean installation?

Read the article
Website has become slower on a VPS, was much fast on a shared host. What's wrong?

- by Arpit Tambi

My shared host suspended my website stating system overload, so I moved my website to a VPS which has 4GB RAM. But for some reason the website has become very slow. This is the vmstat output - procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 3050500 0 0 0 0 0 1 0 0 0 0 100 0 0 Here's the Apache Benchmark output for a STATIC html page I ran on the server itself - Benchmarking www.ask-oracle.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 20 requests completed Update: Server Config: List item Centos 5.6 4 cores cpu 4 GB RAM LAMP stack with APC Wordpress Only one website It takes almost double time to load now, same website was much fast on shared hosting. I know I need to tweak some settings but have no clue where to start from? I have already tried to optimize apache, mysql etc. Update 2: CPU usage is low, see uptime output: 11:09:02 up 7 days, 21:26, 1 user, load average: 0.09, 0.11, 0.09 Update 3: When I load any webpage, browser shows "Waiting" for a long time and then page loads quickly. So I suspect server can accept only limited connections and holds extra connections in a waiting state. How to check this? Update 4: Following is the output on executing netperf TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost.localdomain (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9615.40 [root@ip-118-139-177-244 j3ngn5ri6r01t3]# Here are the Apache MPM settings from httpd.conf, do they look okay? <IfModule worker.c> StartServers 5 MaxClients 100 MinSpareThreads 50 MaxSpareThreads 250 ThreadsPerChild 125 MaxRequestsPerChild 10000 ServerLimit 100 </IfModule>

Read the article
Ubuntu Pound Reverse Proxy Load Balancing Based off active server load?

- by Andrew

I have Pound installed on a loadbalancer. It seems to work okay, except that it randomly assigns the backend server to forward the request to. I've put 1 backend machine under so much load that it went into using swap, and I can't even ssh into it to test this scenareo. I would like the loadbalancer to realize that the machine is overloaded, and send it to a different backend machine. However it doesn't. I've read the man page and it seems like the directive "DynScale 1" is what would monitor this, but it still redirects to the overloaded server. I've also put in "HAport 22" to the backend figuring since I can't ssh in, neither could the loadbalancer and it would consider the backend server dead until it gets rid of the load and responds, but that didn't help either. If anyone could help with this, I'd appreciate it. My current config is below. ###################################################################### ## global options: User "www-data" Group "www-data" #RootJail "/chroot/pound" ## Logging: (goes to syslog by default) ## 0 no logging ## 1 normal ## 2 extended ## 3 Apache-style (common log format) LogLevel 3 ## check backend every X secs: Alive 5 DynScale 1 Client 1200 TimeOut 1500 # poundctl control socket Control "/var/run/pound/poundctl.socket" ###################################################################### ## listen, redirect and ... to: ## redirect all requests on port 80 to SSL ListenHTTP Address 192.168.1.XX Port 80 Service Redirect "https://xxx.com/" End End ListenHTTPS Address 192.168.1.XX Port 443 Cert "/files/www.xxx.com.pem" Service BackEnd Address 192.168.1.1 Port 80 HAport 22 End BackEnd Address 192.168.1.2 Port 80 HAport 22 End End End

Read the article
convert a logical partition to a primary partition

- by ant2009

Hello, Fedora 14 xfce I have the following partition setup. I would like to know how can I convert the logical partition sda6 to a primary partition. Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1707a8a5 Device Boot Start End Blocks Id System /dev/sda1 2048 1026047 512000 83 Linux /dev/sda2 1026048 205844479 102409216 83 Linux /dev/sda3 205844480 214228991 4192256 82 Linux swap / Solaris /dev/sda4 214228992 625141759 205456384 5 Extended /dev/sda5 214231040 573562879 179665920 83 Linux /dev/sda6 573564928 625141759 25788416 7 HPFS/NTFS Filesystem Size Used Avail Use% Mounted on /dev/sda2 97G 5.0G 91G 6% / tmpfs 494M 176K 494M 1% /dev/shm /dev/sda1 485M 68M 392M 15% /boot /dev/sda5 169G 26G 135G 16% /home # partition table of /dev/sda unit: sectors /dev/sda1 : start= 2048, size= 1024000, Id=83 /dev/sda2 : start= 1026048, size=204818432, Id=83 /dev/sda3 : start=205844480, size= 8384512, Id=82 /dev/sda4 : start=214228992, size=410912768, Id= 5 /dev/sda5 : start=214231040, size=359331840, Id=83 /dev/sda6 : start=573564928, size= 51576832, Id= 7 I would like to convert sda6 to a primary partition, the reason for this it to install windows 7 starter. Many thanks for any suggestions,

Read the article
Cannot load from raid with grub

- by Andrew Answer

I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

Read the article
Swapping out a hardware firewall does the mac address get cached?

- by Dan

We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107 | Next Page >