Search Results

Search found 14951 results on 599 pages for 'connect'.

Page 101/599 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Network configuration with limited hardware

  - by Pavel

  I have cable internet and I have two PC. One of them has wireless and ethernet, the other pc has ethernet only. Also, I have a dsl modem that has wireless builtin (some common speedstream model). My goal is to connect all of them so that both have internet access. As I understand, I have two options: connect speedstream to the cable and then connect other PC's to speedstream; OR, connect pc with wireless to the cable and then connect the other pc that has ethernet only using ethernet+wireless through speestream. First one seems to be easy, but it doesn't seem to work. What about the other choice? Is it possible to do it?

  Read the article

• Problem connecting to certain wifi networks

  - by Romas

  I'm using lenovo u300s (it has Intel Centrino Wireless-N 1030 card), and I can connect to wireless network at home with no problem, but I can not connect to any networks at my university. I'm not sure if it's the case but most of university networks are open and you need to sign up your username as you enter browser. There is also an eudoroam network, but I can not connect to it either. Any suggestions? Yes I have the latest ubuntu version.

  Read the article

• sites now not responding on port 80 [closed]

  - by JohnMerlino

  Possible Duplicate: unable to connect site to different port I was trying to resolve an issue with getting a site running on a different port: unable to connect site to different port But somehow it took out all my other sites. Now even the ones that were responding on port 80 are no longe responding, even though I did not touch the virtual hosts for them. I get this message now: Oops! Google Chrome could not connect to mysite.com However, ping responds: ping mysite.com PING mysite.com (64.135.12.134): 56 data bytes 64 bytes from 64.135.12.134: icmp_seq=0 ttl=49 time=20.839 ms 64 bytes from 64.135.12.134: icmp_seq=1 ttl=49 time=20.489 ms The result of telnet: $ telnet guarddoggps.com 80 Trying 64.135.12.134... telnet: connect to address 64.135.12.134: Connection refused telnet: Unable to connect to remote host

  Read the article

• USB 3.0 randomly disconnecting and reconnecting

  - by user1624552

  I had an old laptop that died so I have bought a new one. I have taken the 2.5 SATA hard drive from the old laptop and I have put it into an external 2.5 SATA enclosure usb 3.0 and I connect it to the new laptop. My new laptop has Windows 8 64 bit installed. When I connect the external hard drive to the new laptop throught USB 3.0 port, it gets randomly disconnecting and reconnecting continuously, even when I am not using it. Also happens if I connect to another usb 3.0 port. Also I have observed that If I connect the external hard drive to a USB 2.0 port instead of an USB 3.0 port all work ok, no randomly disconnection and reconnection occurs. It only happens when I connect it to an USB 3.0 port. Some ideas to solve this issue?

  Read the article

• Port forwarding (portmap) works only locally

  - by Tag Wint

  There are four hosts hostA winXP hostB Win2003 hostC Linux RHEL hostD Linux RHEL hostA cannot connect to C and D directly, but B can hostA connects to hostB using VPN hostB and hostC belong to the same subnet1 hostD is in subnet2 From hostA I need to connect to hostC and hostD by SSH. Now I can do it as follows: 1.connecting from hostA to hostB by RDP logon and there: 2.start putty client. I'd like to omit step 1 and connect from A to C and D directly On hostB I have admin acoount and configure port forwarding as follows: netsh interface portproxy add v4tov4 listenport=N1 connectaddress=hostC_IP connectport=N2 netsh interface portproxy add v4tov4 listenport=N3 connectaddress=hostD_IP connectport=N2 netsh interface portproxy show all: Listen on IPv4: Connect to IPv4: Address Port Address Port --------------- ---------- --------------- ---------- * N1 hostC_IP N2 * N3 hostD_IP N2 Now from hostB I can connect to either C and D: ssh localhost:N1 ssh localhost:N3 from hostA ssh hostB:N1 works too, but ssh hostB:N3 DON'T I guess the reason might be different subnets, still have no idea how to fix it. What should I do?

  Read the article

• Azure Linux out of band managment

  - by faker

  I have a Linux (Ubuntu) virtual machine running on Azure. It seems like the only way to connect to it is via SSH. This is OK for normal operation, but what to do when something goes wrong (fsck waiting for user-input, new kernel doesn't boot, mis-configured network, etc.)? There is a grayed out "Connect" button in the management interface, and the help for it says: To access a virtual machine running Windows Server, click Connect and follow the instructions. Enter the password that was set when the virtual machine was created. The Connect button is not available for a virtual machine running Linux, but you can use your favorite SSH program to access it. I've read the documentation on the command line tools, but there is also no way to connect to it. Is there any way for me to get such a console?

  Read the article

• SSH not working after installing SVN server on Debian

  - by sLIDe

  Today I had to install SVN server on my Debian server. I used this tutorial (only I didn't do anything to connect to SVN through file://, http:// or https://, only svn:// and svn+ssh://). After I installed SVN server and configured it after that tutorial, I tried to connect to it. I could connect to it using svn:// protocol, but when I tried to connect using svn+ssh:// protocol, my servers SSH stopped responding. Even after I stopped SVN server and restarted SSH server I can't connect to it.

  Read the article

• How do I stop infinite loop? [closed]

  - by SystemNetworks

  As you see, I have a stack overflow error. I wanted to use a class (goldArmor.java) which has all its own stuffs and uses some booleans, int, double from my main class(play.java). Now I want to call my other class(goldArmor.java) to my main class(play.java). When I press run, it says stackoverflow. How do I fix it? For My goldArmor.java: Play playI = new Play(); This is what I tried: Created another class(connect) to connect from my sub-class to my play.class: goldArmor goldArm = new goldArmor(); THen in my play.java: connect con = new connect();

  Read the article

• Why is my mssql query failing?

  - by Eric Reynolds

  connect(); $arr = mssql_fetch_assoc(mssql_query("SELECT Applications.ProductName, Applications.ProductVersion, Applications.ProductSize, Applications.Description, Applications.ProductKey, Applications.ProductKeyID, Applications.AutomatedInstaller, Applications.AutomatedInstallerName, Applications.ISO, Applications.ISOName, Applications.Internet, Applications.InternetURL, Applications.DatePublished, Applications.LicenseID, Applications.InstallationGuide, Vendors.VendorName FROM Applications INNER JOIN Vendors ON Applications.VendorID = Vendors.VendorID WHERE ApplicationID = ".$ApplicationID)); $query1 = mssql_query("SELECT Issues.AppID, Issues.KnownIssues FROM Issues WHERE Issues.AppID=".$ApplicationID); $issues = mssql_fetch_assoc($query1); $query2 = mssql_query("SELECT ApplicationInfo.AppID, ApplicationInfo.Support_Status, ApplicationInfo.UD_Training, ApplicationInfo.AtomicTraining, ApplicationInfo.VendorURL FROM software.software_dbo.ApplicationInfo WHERE ApplicationInfo.AppID = ".$ApplicationID); $row = mssql_fetch_assoc($query2); function connect(){ $connect = mssql_connect(DBSERVER, DBO, DBPW) or die("Unable to connect to server"); $selected = mssql_select_db(DBNAME, $connect) or die("Unable to connect to database"); return $connect; } Above is the code. The first query/fetch_assoc works perfectly fine, however the next 2 queries fail and I cannot figure out why. Here is the error statement that shows up from php: Warning: mssql_query() [function.mssql-query]: message: Invalid object name 'Issues'. (severity 16) in /srv/www/htdocs/agreement.php on line 47 Warning: mssql_query() [function.mssql-query]: General SQL Server error: Check messages from the SQL Server (severity 16) in /srv/www/htdocs/agreement.php on line 47 Warning: mssql_query() [function.mssql-query]: Query failed in /srv/www/htdocs/agreement.php on line 47 Warning: mssql_fetch_assoc(): supplied argument is not a valid MS SQL-result resource in /srv/www/htdocs/agreement.php on line 48 Warning: mssql_query() [function.mssql-query]: message: Invalid object name 'software.software_dbo.ApplicationInfo'. (severity 16) in /srv/www/htdocs/agreement.php on line 51 Warning: mssql_query() [function.mssql-query]: General SQL Server error: Check messages from the SQL Server (severity 16) in /srv/www/htdocs/agreement.php on line 51 Warning: mssql_query() [function.mssql-query]: Query failed in /srv/www/htdocs/agreement.php on line 51 Warning: mssql_fetch_assoc(): supplied argument is not a valid MS SQL-result resource in /srv/www/htdocs/agreement.php on line 52 The error clearly centers around the fact that the query is not executing. In my database I have a table called Issues and a table called ApplicationInfo so I am unsure why it is telling me that they are invalid objects. Any help would be appreciated. Thanks, Eric R.

  Read the article

• Issue with Facebook JS API, revokeAuthorization

  - by BBonifield

  I am trying to integrate FB connect into our user profile screen. Although, I'm having an issue with FB.ApiClient.revokeAuthorization. http://pastie.org/921942 The basic problem is that I revoke the auth at line 44 after the user clicks the disconnect button. After that, all subsequent API calls don't have a valid session to even check user status. I've tried wrapping blocks in a FB.Connect.forceSessionRefresh block, but then the code will never be called at all. I'm not sure what the proper workflow should be for this purpose. Right now it's basically... User arrives at profile NOT connected to the application. User clicks on the connect button. Once connected, DOM manipulation occurs to hide the connect button and add in a disconnect button. User clicks on the disconnect button. User's authorization to the application is revoked and (it seems) the API session to the FB server is invalidated. DOM manipulation occurs to hide the disconnect button and readd the connect button. User clicks on the connect button. Once connected, the FB.Connect.get_loggedInUser() don't return the actual user.

  Read the article

• Why can't I roll a loop in Javascript?

  - by Carl Manaster

  I am working on a web page that uses dojo and has a number (6 in my test case, but variable in general) of project widgets on it. I'm invoking dojo.addOnLoad(init), and in my init() function I have these lines: dojo.connect(dijit.byId("project" + 0).InputNode, "onChange", function() {makeMatch(0);}); dojo.connect(dijit.byId("project" + 1).InputNode, "onChange", function() {makeMatch(1);}); dojo.connect(dijit.byId("project" + 2).InputNode, "onChange", function() {makeMatch(2);}); dojo.connect(dijit.byId("project" + 3).InputNode, "onChange", function() {makeMatch(3);}); dojo.connect(dijit.byId("project" + 4).InputNode, "onChange", function() {makeMatch(4);}); dojo.connect(dijit.byId("project" + 5).InputNode, "onChange", function() {makeMatch(5);}); and change events for my project widgets properly invoke the makeMatch function. But if I replace them with a loop: for (var i = 0; i < 6; i++) dojo.connect(dijit.byId("project" + i).InputNode, "onChange", function() {makeMatch(i);}); same makeMatch() function, same init() invocation, same everything else - just rolling my calls up into a loop - the makeMatch function is never called; the objects are not wired. What's going on, and how do I fix it? I've tried using dojo.query, but its behavior is the same as the for loop case.

  Read the article

• No Buffer Space available(maximum connection reached?) Form Postgres EDB Driver

  - by Listening.Platform

  We are facing an exception while connecting to database through our java application. The stack trace is as follows com.edb.util.PSQLException: The connection attempt failed. at com.edb.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:189) at com.edb.core.ConnectionFactory.openConnection(ConnectionFactory.java:64) at com.edb.jdbc2.AbstractJdbc2Connection.<init>(AbstractJdbc2Connection.java:161) at com.edb.jdbc3.AbstractJdbc3Connection.<init>(AbstractJdbc3Connection.java:30) at com.edb.jdbc3.Jdbc3Connection.<init>(Jdbc3Connection.java:24) at com.edb.Driver.makeConnection(Driver.java:391) at com.edb.Driver.connect(Driver.java:266) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) ... 12 more Caused by: java.net.SocketException: No buffer space available (maximum connections reached?): connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.<init>(Unknown Source) at java.net.Socket.<init>(Unknown Source) at com.edb.core.PGStream.<init>(PGStream.java:70) at com.edb.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:115) ... 20 more When the error occured we were not able to connect to internet and DB and had to reboot the system. But the error occured again after 3 days at same code i.e while connecting to DB. We checked TCP connections using netstat. But there were not many TCP connections i.e it has not reached the max limit. Our application has multiple long running Java processes that pools the DB connections (not more than 60) and keeps it alive for firing the next query (as it has to poll the DB every 2 seconds). Some of the queries in our application are joining large tables (10 million records) to get the related data. We are using following System and applications Windows 2003 server SP2 Java 1.6 Postgres Plus Advanced server 8.4 Database edb-jdbc14.jar driver for connection DB from Java We have used the default configuration of Postgres DB except increasing the connection to 120 from 100. Has anybody encountred the same error with postgres edb driver? Can anybody help us finding the solution?

  Read the article

• Cakephp, Route old google search results to new home page

  - by ion

  Hi there, I have created a new website for a company and I would like all the previous search engine results to be redirected. Since there were quite a few pages and most of them where using an id I would like to use something generic instead of re-routing all the old pages. My first thought was to do that: Router::connect('/*', array('controller' => 'pages', 'action' => 'display', 'home')); And put that at the very end of the routes.php file [since it is prioritized] so that all requests not validating with previous route actions would return true with this one and redirect to homepage. However this does not work. I'm pasting my routes.php file [since it is small] hoping that someone could give me a hint: Router::connect('/', array('controller' => 'pages', 'action' => 'display', 'home')); Router::connect('/company/*', array('controller' => 'articles', 'action' => 'view')); Router::connect('/contact/*', array('controller' => 'contacts', 'action' => 'view')); Router::connect('/lang/*', array('controller' => 'p28n', 'action' => 'change')); Router::connect('/eng/*', array('controller' => 'p28n', 'action' => 'shuntRequest', 'lang' => 'eng')); Router::connect('/gre/*', array('controller' => 'p28n', 'action' => 'shuntRequest', 'lang' => 'gre')); Router::parseExtensions('xml');

  Read the article

• trouble connecting to MySql DB (PHP)

  - by user332817

  Hi I have the following PHP code to connect to my db. <?php ob_start(); $host="localhost"; // Host name $username="root"; // Mysql username $password=""; // Mysql password $db_name="test"; // Database name $tbl_name="members"; // Table name // Connect to server and select databse. mysql_connect("$host", "$username", "$password")or die("cannot connect"); ?> however I get the following error: Warning: mysql_connect() [function.mysql-connect]: [2002] A connection attempt failed because the connected party did not (trying to connect via tcp://localhost:3306) in C:\Program Files (x86)\EasyPHP-5.3.2i\www\checklogin.php on line 11 Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. in C:\Program Files (x86)\EasyPHP-5.3.2i\www\checklogin.php on line 11 Fatal error: Maximum execution time of 30 seconds exceeded in C:\Program Files (x86)\EasyPHP-5.3.2i\www\checklogin.php on line 11 I am able to add a db/tables via phpmyadmin but I cant connect using php. here is a screenshot of my phpmyadmin page: http://img294.imageshack.us/img294/1589/sqls.jpg any help would be appreciated, thanks in advance.

  Read the article

• Facebook dialog appears but always says "An error has occurred"

  - by Conor James

  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml"> ... <head> ... <script src="http://connect.facebook.net/en_US/all.js#xfbml=1"></script> </head> <body> <div id="fb-root"></div> <fb:like id="fb-like" href="http://www.example.com" layout="button_count" show_faces="false" width="100"></fb:like> ... myscript.js: FB.ui( { method: 'stream.publish', message: 'getting educated about Facebook Connect', attachment: { name: 'Connect', caption: 'The Facebook Connect JavaScript SDK', description: ( 'A small JavaScript library that allows you to harness ' + 'the power of Facebook, bringing the user\'s identity, ' + 'social graph and distribution power to your site.' ), href: 'http://github.com/facebook/connect-js' }, action_links: [ { text: 'Code', href: 'http://github.com/facebook/connect-js' } ], user_message_prompt: 'Share your thoughts about Connect' }, function(response) { if (response && response.post_id) { alert('Post was published.'); } else { alert('Post was not published.'); } } ); I have Facebook like button on my page which works fine. But when I call the FB.ui method above from my JavaScript source, the Facebook dialog pops up but displays this error message: **An error occurred. Please try again later.** This has happened repeatedly for two days since I started trying to implement it. Not a very helpful error message. Any idea what might cause it or how to narrow down the problem?

  Read the article

• How can I use Linksys WPSM54G print server as a bridge for another machine AND also share the printe

  - by user26453

  I have a Linksys WPMS54G currently sharing a printer via the USB port with the rest of my network via the wireless. Is there any way to set it up so that the ethernet port is bridged over the wireless adapter portion? i.e., be able to uplink another machine or switch into the network via the WPMS54G's ethernet port? Update: The network architecture is as follows: (1) Linksys WRT54G router that serves as a router, DHCP server, and wireless access point for the network. Fairly standard configuration (3) Laptops that are used throughout the house via wifi (1) Linksys WPSM54G printer server that connects via wireless to the router, in a separate room with a printer attached to print seerver's USB port along with (1) Un-networked desktop in the same room Since the printer is plugged into the USB port of the WPSM54G, I am wondering if I can connect the desktop to the ethernet port of the WPSM54G and have it bridged over the wifi to the router. The twist here is that the ethernet is initially used to connect the wireless print server to the router (for configuration, can't configure it wirelessly if you are initially on a encrypted network). Now instead of using that ethernet port as a way to connect the print server to the network (via the router), I want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer (attached via USB) through the print server. If this is not clear, please comment. To be clear, the computer I want to connect/bridge into the network does not have a wireless card, is far from the router, and I do not want to lay ethernet cable to connect it. While I could certainly buy a legitimate wireless bridge to accomplish this, I figured since the print server already has an ethernet port, see if I can't use that.

  Read the article

• Strange Jmeter connection refuse on Tomcat

  - by Tommy

  I tried difference setting in Jmeter and Tomcat. If the Threads number in JMeter is 1~200, Then tomcat is okay. If It is 300, Then after serving few requests, tomcat starts to output errors. Here is the error show in JMeter java.net.ConnectException: Connection refused: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at sun.net.NetworkClient.doConnect(Unknown Source) at sun.net.www.http.HttpClient.openServer(Unknown Source) at sun.net.www.http.HttpClient.openServer(Unknown Source) at sun.net.www.http.HttpClient.<init>(Unknown Source) at sun.net.www.http.HttpClient.New(Unknown Source) at sun.net.www.http.HttpClient.New(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source) at org.apache.jmeter.protocol.http.sampler.HTTPJavaImpl.sample(HTTPJavaImpl.java:483) at org.apache.jmeter.protocol.http.sampler.HTTPSamplerProxy.sample(HTTPSamplerProxy.java:62) at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1018) at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1004) at org.apache.jmeter.threads.JMeterThread.process_sampler(JMeterThread.java:411) at org.apache.jmeter.threads.JMeterThread.run(JMeterThread.java:297) at java.lang.Thread.run(Unknown Source) My tomcat server.xml in eclipse <!--The connectors can use a shared executor, you can define one or more named thread pools--> <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="2000" minSpareThreads="250" acceptCount="2000"/> <Connector executor="tomcatThreadPool" URIEncoding="UTF-8" connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443" /> Any idea why this is happening ? How do i check the server.xml is correctly used? It is a JSF2 application if it helps. Thanks in advance.

  Read the article

• Total newb having SSH and remote MySQL access problems

  - by kscott

  I don't often work with linux or need to SSH into remote MySQL databases, so pardon my ignorance. For months I had been using the HeidiSQL client application to remotely access a MySQL database. Today two things happened: the DB moved to a new server and I updated HeidiSQL, now I cannot log in to the MySQL server, when attempting I get this message from Heidi: SQL Error (2003) in statement #0: Can't connect to MySQL server on 'localhost' (10061) If I use Putty, I can connect to the server and get MySQL access through command line, including fetching data from the DB. I assume this means my credentials and address are correct, but do not understand why putting those same details into HeidiSQL's SSH tunnel info won't work. I also downloaded the MySQL Workbench and attempted to set up a connection through that client and got this message: Cannot Connect to Database Server Your connection attempt failed for user 'myusername' from your host to server at localhost:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 Please: 1 Check that mysql is running on server localhost 2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed) 3 Check the myusername has rights to connect to localhost from your address (mysql rights define what clients can connect to the server and from which machines) 4 Make sure you are both providing a password if needed and using the correct password for localhost connecting from the host address you're connecting from From Googling around I see that it could be related to the MySQL bind-address, but I am a third party sub-contractor with no access to the MySQL settings of this box and the system admin is assuring me that I'm an idiot and need to figure it out on my end. This is completely possible but I don't know what else to try. Edit 1 - The client settings I am using In Heidi and MySQL Workbench I am using the following: SSH host + port: theHostnameOfTheRemoteServer.com:22 {this is the same host I can Putty to} SSH Username: mySSHusername {the same user name I use for my Putty connection} SSH Password: mySSHpassword {the same password for the Putty connection} Local port: 3307 MySQL host: theHostnameOfTheRemoteServer.com MySQL User: mySQLusername {which I can connect with once in with Putty} MySQL Password: mySQLpassword {which works once in with Putty} Port: 3306

  Read the article

• Need to have access to my office PC from my laptop hopping through two VPN servers

  - by Andriy Yurchuk

  Here's the illustration of what I have ( http://clip2net.com/s/2fvar ): My office PC with it's IP of 123.45.e.f. Office VPN, which I will connect to from my VPS to get to my office PC. My own VPS, which I use as a: client to connect to office VPN (through vpnc, which creates a tun0 with 123.45.c.d IP address); VPN server my laptop can connect to (OpenVPN, tun1, 10.8.0.1) My own laptop I will use as a VPN client to connect to VPS OpenVPN server (will create a tun0 with 10.8.0.2 IP address) Now what I have to do is to allow my laptop to connect to at least my office PC, but preferably to all the 123.45.x.x subnet. Please advice on how to best configure OpenVPN, routing, iptables or whatever else is needed on my VPS so that my laptop could gain access to my office PC. P.S. The reason I'm hopping through my VPS is that being connected to the office WiFi I cannot access my office PC and I cannot connect to office VPN (which is another way to access my office PC). The only way to access my PC from office WiFi I have is hopping though an outside network.

  Read the article

• Windows authentication to SQL Server via IIS and PHP

  - by Jeff

  We're running a PHP 5.4 application on Server 2008 R2. We would like to connect to a SQL Server 2008 database, on a separate server, using Windows authentication (must be Windows authentication--the DB admins won't let us connect any other way). I have downloaded the SQL Server drivers for PHP and installed them. IIS is configured for Windows authentication, and anonymous authentication has been disabled. $_SERVER['AUTH_USER'] reports our currently logged on Windows account. In php.ini, we have set fastcgi.impersonate = 1. When we setup a connection using the following code from Microsoft: $serverName = "sqlserver\sqlserver"; $connectionInfo = array( "Database"=>"some_db"); /* Connect using Windows Authentication. */ $conn = sqlsrv_connect( $serverName, $connectionInfo); if( $conn === false ) { echo "Unable to connect.</br>"; die( print_r( sqlsrv_errors(), true)); } We are presented with the following error message: Unable to connect. Array ( [0] => Array ( [0] => 28000 [SQLSTATE] => 28000 [1] => 18456 [code] => 18456 [2] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [message] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. ) Is it possible to connect to SQL Server 2008 via PHP using Windows authentication? Are there any additional required settings we need to make on IIS, SQL Server, or any other component (like a domain controller)?

  Read the article

• Failure to obtain IP with ARP over Wi-Fi with personal Wi-Fi router in client mode

  - by axk

  I'm trying to connect a Samsung TV to the Internet using a TL-MR3020 personal wireless router in client mode. The TV fails to connect to the network. It sees the ethernet cable connected though. Here's my network topology: Here's what I've captured with Wireshark filtering for ARP (eth.type == 0x0806): It appears the TV fails to get the IP of the gateway (DSL modem/router) for some reason. One thing I've noticed is that the source MAC for the ARP requests coming from the TV is the MAC of the Portable wireless router (that is cd:89:00), not the TV itself and the modem sends the responses to that MAC (I'm not an expert and don't know if its okay or it may make the TV fail to get the requested IP). Also I'm able to ping the TV from the DSL router (through the telnet interface) and the router has an entry in its MAC table for the TV's IP with the Portable wireless router's MAC (that is cd:89:00). If I'm able to ping the TV I suppose it should know the router's MAC to respond to the ping, but then why these continuous ARP requests... I've also tried to connect my desktop trough this Portable wireless router the same way I'm trying to connect the TV and it works fine, I can set the DSL Modem's IP as the default gateway on the desktop's NIC and connect to the Internet. The TV can connect to the Internet when connected to the DSL Router with a wired connection. Any suggestions on what may be the cause of the problem / how to further debug it are welcome. Thanks!

  Read the article

• Using WSUS Admin Console from outside domain

  - by Nick

  Environment: I have a workstation on our primary domain. We have a primary WSUS Server that is the upstream server of 8 different testing domains. The Primary WSUS server is not part of any domain. Routing is configured between my workstation and the Primary WSUS server. I can RDP to the Primary WSUS sever without any problem. The router is configured to forward any any between my workstation and the Primary WSUS server. This WSUS server cannot be part of a domain due to external requirements (I can't change them) on the lab I work in. The version of WSUS is WSUS 3.0 SP 2 What I want to do: I need to connect to the WSUS server with the WSUS Admin console from my local workstation. The end goal is to connect via Powershell and manage with that. I also need to take what I do here and port it to the 8 test domains so I can manage those WSUS servers. The routing is all in place so I can talk to the servers, it's just connecting to the WSUS console that is causing problems. The problem: I cannot get my workstation to connect to the WSUS Console. I get one of the following errors depending on the setup. 1st error: Cannot connect to 'WSUS'. You do not have the permissions required to access this WSUS server. To connect to the server you must be a member of the WSUS Administrators or WSUS Reporters security groups I also get the warning 7012 from the event log that says the same thing. 2nd error: Cannot connect to 'WSUS'. The server may be using another port or different Secure Sockets Layer setting. What I have tried: So far I have configured IIS for Anonymous Authentication on both the WSUS Administration and ApiRemoting30 using an account will call WSUS_User. With this in place, I get the 1st error. When I do this though, the local WSUS Console cannot be used either. Reverting back to only Windows Authentication allows the local console to work, but the remote console now give the 2nd error. I have confirmed the port, and that there is no SSL in use (which is a policy that is pushed from above, that I cannot effect). I have placed WSUS_User in the groups mentioned above, but it still does not connect. I made sure WSUS_User has full access on C:\Program Files\Update Services and C:\Program Files\Update Services\WebServices I am not very familiar with the workings of WSUS or IIS, and have gone as far as I can figure out on my own. Googling these errors all take me to the same steps about Anonymous Authentication and configuring permissions on folders. Note: I have cross-posted this to StackOverflow as well.

  Read the article

• Total newb having SSH tunnel and remote MySQL access problems

  - by kscott

  I don't often work with linux or need to SSH tunnel into remote MySQL databases, so pardon my ignorance. I'm using Windows 7 and am needing to connect to a remote MySQL instance on a Linux server. For months I had been using the HeidiSQL client application successfully. Today two things happened: the DB moved to a new server and I updated HeidiSQL, now I cannot log in to the MySQL server, when attempting I get this message from Heidi: SQL Error (2003) in statement #0: Can't connect to MySQL server on 'localhost' (10061) If I use Putty, I can connect to the server and get MySQL access through command line, including fetching data from the DB. I assume this means my credentials and address are correct, but do not understand why putting those same details into HeidiSQL's SSH tunnel info won't work. I also downloaded the MySQL Workbench and attempted to set up a connection through that client and got this message: Cannot Connect to Database Server Your connection attempt failed for user 'myusername' from your host to server at localhost:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 Please: 1 Check that mysql is running on server localhost 2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed) 3 Check the myusername has rights to connect to localhost from your address (mysql rights define what clients can connect to the server and from which machines) 4 Make sure you are both providing a password if needed and using the correct password for localhost connecting from the host address you're connecting from From Googling around I see that it could be related to the MySQL bind-address, but I am a third party sub-contractor with no access to the MySQL settings of this box and the system admin is assuring me that I'm an idiot and need to figure it out on my end. This is completely possible but I don't know what else to try. Edit 1 - The client settings I am using In Heidi and MySQL Workbench I am using the following: SSH host + port: theHostnameOfTheRemoteServer.com:22 {this is the same host I can Putty to} SSH Username: mySSHusername {the same user name I use for my Putty connection} SSH Password: mySSHpassword {the same password for the Putty connection} Local port: 3307 {this is on the SSH settings tab and was defaulted to 3307 by Heidi, changing it to 3306 gives me a different error: SQL Error (1045) in statement #0: Access denied for user 'mySQLusername'@'localhost' (using password: YES)"} MySQL host: theHostnameOfTheRemoteServer.com {consensus seems to be I should use 'localhost' here} MySQL User: mySQLusername {which I can connect with once in with Putty} MySQL Password: mySQLpassword {which works once in with Putty} Port: 3306

  Read the article

• How is incoming SMTP mail being delivered despite blocked port

  - by Josh

  I setup a MX mail server, everything works despite port 25 being blocked, I'm stumped as to why I am able to receive email with this setup, and what the consequences might be if I leave it this way. Here are the details: Connections to SMTP over port 25 and 587 both reliably connect over my local network. Connections to SMTP over port 25 are blocked from external IPs (the ISP is blocking the port). Connections to Submission SMTP over port 587 from external IPs are reliable. Emails sent from gmail, yahoo, and a few other addresses all are being delivered. I haven't found an email provider that fails to deliver mail to my MX. So, with port 25 blocked, I am assuming other MTA servers fallback to port 587, otherwise I can't imagine how the mail is received. I know port 25 shouldn't be blocked, but so far it works. Are there mail servers that this will not work with? Where can I find more about how this is working? -- edit More technical detail, to validate that I'm not missing something silly. Obviously in the transcript below I've replaced my actual domain with example.com. # DNS MX record points to the A record. $ dig example.com MX +short 1 example.com $ dig example.com A +short <Public IP address> # From a public server (not my ISP hosting the mail server) # We see port 25 is blocked, but port 587 is open $ telnet example.com 25 Trying <public ip>... telnet: Unable to connect to remote host: Connection refused # Let's try openssl $ openssl s_client -starttls smtp -crlf -connect example.com:25 connect: Connection refused connect:errno=111 # Again from a public server, we see port 587 is open $ telnet example.com 587 Trying <public ip>... Connected to example.com. Escape character is '^]'. 220 example.com ESMTP Postfix ehlo example.com 250-example.com 250-PIPELINING 250-SIZE 10485760 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250-DSN 250-BINARYMIME 250 CHUNKING quit 221 2.0.0 Bye Connection closed by foreign host. Here is a portion from the mail log when receiving a message from gmail: postfix/postscreen[93152]: CONNECT from [209.85.128.49]:48953 to [192.168.0.10]:25 postfix/postscreen[93152]: PASS NEW [209.85.128.49]:48953 postfix/smtpd[93160]: connect from mail-qe0-f49.google.com[209.85.128.49] postfix/smtpd[93160]: 7A8C31C1AA99: client=mail-qe0-f49.google.com[209.85.128.49] The log shows that a connection was made to the local IP on port 25 (I'm not doing any port mapping, so it is port 25 on the public IP too). Seeing this leads me to hypothesize that the ISP block on port 25 only occurs when a connection is made from an IP address that is not known to be a mail server. Any other theories?

  Read the article

• weird SSH connection timed out

  - by bran

  This problem started when I tried to login to my brand spaning new VPS server. I remember that in my first SSH try on the server I actually got prompt for password several times which would mean that there is no port blocking problem from my isp. Since the password did'nt work for me (for some reason). I had a lot of authentication failure. After that attempting to log in to the server just timed out. I did the same at mediatemple (which used to work before with sftp) and put in wrong password and now trying to ssh (or even SFTP) gives me timeout error. So some kind of security feature is preventing me from trying too many times to log in, either from my side or from the server side. Any idea what it could be? TRaceroute and ping works on the ips. I am using a zyxel wimax modem (max-206m1r - if that's relevent) c:\Program Files (x86)\OpenSSH\bin>ssh.exe [email protected] ssh: connect to host 109.169.7.136 port 22: Connection timed out c:\Program Files (x86)\OpenSSH\bin>ssh.exe [email protected] ssh: connect to host 109.169.7.131 port 22: Connection timed out c:\Program Files (x86)\OpenSSH\bin>ssh.exe [email protected] ssh: connect to host 87.117.249.227 port 22: Connection timed out c:\Program Files (x86)\OpenSSH\bin>ssh.exe [email protected] -vv OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to 87.117.249.227 [87.117.249.227] port 22. debug1: connect to address 87.117.249.227 port 22: Connection timed out ssh: connect to host 87.117.249.227 port 22: Connection timed out c:\Program Files (x86)\OpenSSH\bin>ssh.exe s122797.gridserver.com Could not create directory '/home/pavs/.ssh'. The authenticity of host 's122797.gridserver.com (205.186.175.110)' can't be est ablished. RSA key fingerprint is 33:24:1e:38:bc:fd:75:02:81:d8:39:42:16:f6:f6:ff. Are you sure you want to continue connecting (yes/no)? yes Failed to add the host to the list of known hosts (/home/pavs/.ssh/known_hosts). Password: Password: Password: [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 205.186.175.110: 2: Too many authentication failures fo r pavs c:\Program Files (x86)\OpenSSH\bin>ssh.exe s122797.gridserver.com ssh: connect to host s122797.gridserver.com port 22: Connection timed out c:\Program Files (x86)\OpenSSH\bin>ssh.exe s122797.gridserver.com ssh: connect to host s122797.gridserver.com port 22: Connection timed out

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >