Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 101/444 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

  • Multiple vlan issue with procurve switch

    - by Chris-AZ
    I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

    Read the article

  • Cannot Access Web Interface on HP 2510G

    - by Stephen
    I am currently setting up a new infrastructure with HP 2510s as edge switches and an HP E5406 as the main switch. I also have a DHCP and DNS server running on the same network. When i first set up one of my 2510 switches, I gave it a static IP through the console and then went to the web interface to continue my configuration. Later, I realized that I assigned it the wrong IP address, so i went through the web interface and changed the IP address to the correct one. Now, I can't access the web interface. I can telnet to the switch on the new IP address, but the web interface will not load. If I switch from static IP to DHCP, it loads the web interface. Any ideas on what could be causing the web server in the 2510 not to load with the new static IP address?

    Read the article

  • Port forwarding problem

    - by Steve
    I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

    Read the article

  • Automatic allocation(not Dynamic Allocation) on Windows DHCP server

    - by Kazoom
    DHCP supports three different mechanisms for IP address allocation: Manual allocation: the server's administrator creates a configuration for the server that includes the MAC address and IP address of each DHCP client that will be able to get an address: functionally equivalent to BOOTP though the protocol is incompatible. Automatic allocation: the server's administrator creates a configuration for the server that includes only IP addresses, which it gives out to clients. An IP address, once associated with a MAC address, is permanently associated with it until the server's administrator intervenes. Dynamic allocation: like automatic allocation except that the server will track leases and give IP addresses whose lease has expired to other DHCP clients How can i configure the automatic allocation on Windows 2000 or XP DHCP server? i can think of setting the lease to unlimited period, but i m not sure if the computer shutsdown gracefully it will make the ip address available to other machine.

    Read the article

  • Relay thru external SMTP server on Exchange 2010

    - by MadBoy
    My client has dynamic IP on which he hosts Exchange 2010 with POP3 Connector running and gathering emails from his current hosting. Until he gets static IP he wants to send emails out. This will work most of the time but some servers won't accept such email sent by Exchange (from dynamic ip due to multiple reasons) so I would like to make a relay thru external SMTP server which hosts current mailboxes. Normally SMTP server could be set up to allow relay thru it but this would require static IP to be allowed on that server so it would know which IP is allowed to relay thru it. Or is there a way to setup relay in Exchange 2010 so it can use dynamic IP and kinda authenticates with user/password itself on the hosted server?

    Read the article

  • SVN Checkout URL - fresh install

    - by Webnet
    I just setup SVN on a server that is running Ubuntu server as a fresh install. I've got it up and running but am having difficult determining how to connect to it. I'm trying to do an import using the local IP address: http://IP/RepositoryName but it's saying it can't resolve the IP. I'm wondering if there's something on the server I need to setup. I have not modified dav_svn.conf because there is another server here that is running SVN (I'm migrating it to a new server) and it's dav_svn.conf is not modified. The current working SVN has a subdomain associated with the IP location of the server but doesn't do anything special with the ports as far as I can tell. I'm getting this error via RapidSVN when I try to import... Error: Error while performing action: OPTIONS of 'http://IP/RepositoryName': could not connect to server (http://IP) Any help would be appreciated

    Read the article

  • Routing for IPSec tunnel

    - by Emre A
    For Juniper NetScreen-NS25, I configured a site-to-site IPSec tunnnel. For the outside interface of remote site, I also needed to go through tunnel which has the same IP as IPSec gateway. Now, when I add static route to route that outside interface IP through tunnel while tunnel is up, there would be no problem at all but if the tunnel is down for some reason, it cannot be re-established as the routing for the IPSec gateway IP which is the same as outside interface IP is set to go through tunnel which it needed to re-etablish at that time. So, packets won't hit that IP. I tried adding another routing entry which has metric 2 through other gateway but it did'nt succeeded. So, what type of routing should I configure to reach that IP when tunnel is down. Thanks in advance.

    Read the article

  • Routing for IPSec tunnel

    - by Emre A
    Hello. For Juniper NetScreen-NS25, I configured a site-to-site IPSec tunnnel. For the outside interface of remote site, I also needed to go through tunnel which has the same IP as IPSec gateway. Now, when I add static route to route that outside interface IP through tunnel while tunnel is up, there would be no problem at all but if the tunnel is down for some reason, it cannot be re-established as the routing for the IPSec gateway IP which is the same as outside interface IP is set to go through tunnel which it needed to re-etablish at that time. So, packets won't hit that IP. I tried adding another routing entry which has metric 2 through other gateway but it did'nt succeeded. So, what type of routing should I configure to reach that IP when tunnel is down. Thanks in advance.

    Read the article

  • Connect to virtual host computer from within virtualbox

    - by Nicky De Maeyer
    I'm currently developing on an ubuntu karmic. For this I've installed lampp with a virtual host on apache so http://myproject/ is mapped to my project's root directory. Now to test the website in IE I've installed an XP machine on a virtualBox OSE. Ive managed to get the virtual host working on the XP by adding its to the hostfile, like this: 255.255.255.255 myproject where 255.255.255.255 is the ip adress of the host computer (my ubuntu). Now every day when I come to work and plug in my computer to the network, my IP has changed. so When i boot the XP I have to change the IP in the hostfile to my new IP. Is there any way where I can set the ip to somthing the XP will recognise as the host machine? I've tried replacing the IP in the hostfile by the host computer name, but that does not seem to work... This would make my like a bit easier :)

    Read the article

  • Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

    - by BraeburnDev
    I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • How to know the source of certain TCP traffic on AIX

    - by A.Rashad
    We have two AIX boxes, one for production system and another for testing. both systems are running ATM machine switches, where the ATM device is connected via TCP socket. we had an issue on production system where the machine would power off or get disconnected but the netstat -na | grep <IP of machine > would still mention that the socket is up when simulated that case on the UAT environment, the problem did not happen, where the socket would terminate in 3 to 5 minutes. when sniffed on the traffic between the machine and ATM we found that no traffic takes place on production while there is some sort of heartbeat on UAT. but it is not initiated by the application. $>tcpdump | grep -v "10.2.2.71" | grep -v "HSRP" | grep "10.3.1.30" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on en6, link-type 1, capture size 96 bytes 09:08:13.323421 IP server073.afs3-callback > 10.3.1.30.impera: . 278204201:278204202(1) ack 3307884029 win 164 09:08:13.335334 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:08:23.425771 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:08:23.425789 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 09:09:13.628985 IP server073.afs3-callback > 10.3.1.30.impera: . 0:1(1) ack 1 win 164 09:09:13.633900 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:09:23.373634 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:09:23.373647 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 while on production, that traffic is not there. we want to know where this traffic is initiated from to implement on production to sense disconnection our comms parameters are: tcp_keepcnt = 2 tcp_keepidle = 100 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_finwait2 = 1200 can anyone help?

    Read the article

  • associate dhcp requests with subdomains in dnsmasq

    - by Dezra
    I have dnsmasq running as a dns server with a number of linux boxes using static ips that run several virtual hosts on subdomains. I currently have the following address line in my dnsmasq.conf to map the subdomain of a boxes address to the boxes static ip: address=/.devbox1.mydomain.com/192.168.1.3 address=/.devbox2.mydomain.com/192.168.1.4 e.g. site1.devbox1.mydomain.com > maps to devbox1 static ip, site1 virtual host site2.devbox1.mydomain.com > maps to devbox1 static ip, site2 virtual host site3.devbox2.mydomain.com > maps to devbox2 static ip, site3 virtual host I was wondering if I can change the machines over to DHCP addresses (instead of static) and have dnsmasq use the dhcp ip instead of the static one? Can I modify the address line to refer to the DHCP address (obviously, I cant hardcode the address)? I know I could add mac address to ip allocation, but I want to avoid this if possible.

    Read the article

  • Deployment of broadband network

    - by sthustfo
    Hi all, My query is related to broadband network deployment. I have a DSL modem connection provided by my operator. Now the DSL modem has a built-in NAT and DHCP server, hence it allocates IP addresses to any client devices (laptops, PC, mobile) that connect to it. However, the DSL modem also gets a public IP address X that is provisioned by the operator. My question is Whether this IP address X provisioned by operator is an IP address that is directly on the public Internet? Is it likely (practical scenario) that my broadband operator will put in one more NAT+DHCP server and provide IP addresses to all the modems within his broadband network. In this case, the IP addresses allotted to the modem devices will not be directly on the public Internet. Thanks in advance.

    Read the article

  • SSH Socks Proxy wiith iptables REDIRECT

    - by Radium
    I have googled and haven`t found the answer on my question. Help me please. There are two servers: serverA with public IP 12.0.0.10 and an private IP 10.0.0.5 serverB with public IP 20.0.0.11 I have setup SOCKS proxy on serverB to serverA: ssh -D20.0.0.11:2222 [email protected] So when on my local machine in a browser i specify SOCKS proxy 20.0.0.11:2222 (serverB:2222) as external IP while browsing i get 12.0.0.10 (serverA IP). That is ok. As well if i go onto http://10.0.0.5 (serverA private IP) it is also reachable. That is what i need. I want to make servers A private IP to be available through servers B public IP on certain ports but without specifying SOCKS in my browser. I could use ssh port forward but the problem is - i need to forward many ports and do not know which exactly - i know only the range. So when i connect to 20.0.0.11 to any port , for example, from 3000:4000 range, i want that traffic to be redirected to 10.0.0.5 on the same port. That is why i`ve decided maybe SOCKS proxy via SSH and iptables REDIRECT could help me. Client - serverBPublicIP (any port from range 3000:4000) - serverAPublicIP - serverAPrivateIP (the port was requested on serverBPublicIP) On serverB i do: ssh -D20.0.0.11:2222 [email protected] iptables -t nat -A PREROUTING -d 20.0.0.11 -p tcp --dport 3000:4000 -j REDIRECT --to-port 2222 But that does not work - when i telnet on 20.0.0.11:3001 for example i do not see any proxied traffic on the serverA. What should i do else? I have tried tcpsocks like this (in example i am telneting to 20.0.0.11:3001) Client -> 20.0.0.11:3001 -> iptables REDIRECT from 3001 --to-port 1111 -> tcpsocks from 1111 to 2222 -> SOCKS proxy from serverB to serverA on port 2222 -> serverA But i do not know what to do with the traffic on serverA. How to route it to its private IP. Help me please. I know, VPN removes all the hell i am trying to create, but i have no ability to use tun/tap device. It is disabled.

    Read the article

  • Microsoft Cluster or Oracle Fail Safe error

    - by osdm
    Trying to get Oracle Database 10g to work on Microsoft cluster (using Oracle Fail Safe, not RAC). Everything installed, but when trying to verify group or add database to group I get following error: FS-10220: Network name MSK00-NST01-1 maps to IP address 10.1.11.74 in the cluster resource but maps to IP address 10.1.1.74 on the system MSK00-NST01-1 is cluster name, 10.1.11.74 is first node IP, 10.1.1.74 is second node IP. Oracle documentation says "The cluster and the system must have the same IP address mapping for a network name. Check that either the network name server or the local host file has the same IP address mapping as the cluster." Where is the error - in Oracle configuration or in cluster configuration? What are possible ways to correct it? Thanks a lot for any ideas.

    Read the article

  • Windows 7 cannot join samba domain

    - by Antonis Christofides
    I have a 3.5.6 samba server with a LDAP backend (both on Debian 6.0). I've been successfully adding Windows XP machines to the domain for years. I now try to add Windows 7. I have made the recommended registry changes, but I don't have any success so far. Here is what happens: 1. I go to computer name, select "Domain" instead of "Workgroup", type in the domain name, click OK. It asks me for the username and password of an account that can add computers to the domain; I enter them. After about 40 seconds, I get the following message: The following error occurred attempting to join the domain "ITIA": The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted unjoin, reboot, and rejoin the domain. Despite this, the samba server successfully creates the computer account. 2. Therefore, if I try again a second time, without deleting the already created computer account, I get a different error: The following error occurred attempting to join the domain "ITIA": The specified account already exists. (Note that until a while ago samba wasn't configured to automatically create computer accounts. What I did whenever I wanted an XP to join was to manually create it. When I first attempted to solve the Windows 7 join problem, I setup samba to do this automatically, as this is what most people do, as I understand, and I thought that it might be related. I haven't attempted to add an XP since I made this change, so I don't know if it works, but whether it works or not, the problem remains.) Update 1: Here are the relevant parts of smb.conf: [global] panic action = /usr/share/samba/panic-action %d workgroup = ITIA server string = Itia file server announce as = NT interfaces = 147.102.160.1 volume = %h passdb backend = ldapsam:ldap://ldap.itia.ntua.gr:389 ldap admin dn = uid=samba,ou=daemons,dc=itia,dc=ntua,dc=gr ldap ssl = off ldap suffix = dc=itia,dc=ntua,dc=gr ldap user suffix = ou=people ldap group suffix = ou=groups ldap machine suffix = ou=computers unix password sync = no add machine script = smbldap-useradd -w -i %u log file = /var/log/samba/samba-log.all log level = 3 max log size = 5000 syslog = 2 socket options = SO_KEEPALIVE TCP_NODELAY encrypt passwords = true password level = 1 security = user domain master = yes local master = no wins support = yes domain logons = yes idmap gid = 1000-2000 Update 2: The server has a single network interface eth1 (also an unused eth0 that shows up only in the kernel boot messages) and two ip addresses; the main, 147.102.160.1, and an additional one, 147.102.160.37, that comes up with "ip addr add 147.102.160.37/32 dev eth1" (used only for a web site that has a different certificate than other web sites served from the same machine). One of the problems I recently faced was that samba was using the latter IP address. I fixed that by adding the "interfaces = 147.102.160.1" statement in smb.conf. Now: acheloos:/etc/apache2# tcpdump host 147.102.160.40 and not port 5900 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:13:56.549048 IP lithaios.itia.civil.ntua.gr.netbios-dgm > 147.102.160.255.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549056 ARP, Request who-has acheloos2.itia.civil.ntua.gr tell lithaios.itia.civil.ntua.gr, length 46 13:13:56.549091 ARP, Reply acheloos2.itia.civil.ntua.gr is-at 00:10:4b:b4:9e:59 (oui Unknown), length 28 13:13:56.549324 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549608 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos2.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.549741 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550364 IP lithaios.itia.civil.ntua.gr.netbios-dgm > acheloos.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) 13:13:56.550468 IP acheloos.itia.civil.ntua.gr.netbios-dgm > lithaios.itia.civil.ntua.gr.netbios-dgm: NBT UDP PACKET(138) (acheloos2 is the second IP address, 147.102.160.37). The above dump occurs when I click "OK" (to join the domain), until it asks me for the username and password of a user that can join the domain. I don't know why the client is contacting the second IP address. I tried temporarily deactivating it, but I still had some related ARP traffic (though I think not IP traffic).

    Read the article

  • Multi Gateway and Backup Routing on a cisco router

    - by user64880
    Hi all, I have a 2611 Cisco Router with only one Fastethernet port Now I have two internet gateways. I want to config my router as when primary routing fails second routing automatically start to route all my packets. When I set 2 IP route command in my router then I check I see it work well but when peer IP on primary routing is down it can not change to second routing until I remove first route command.In the following I write my setting. How can I set it? interface FastEthernet0/0 ip address 81.12.21.100 255.255.255.248 secondary ip address 62.220.97.14 255.255.255.252 ip route 0.0.0.0 0.0.0.0 62.220.97.13 ip route 0.0.0.0 0.0.0.0 81.12.21.97 100 Cheer, Kamal

    Read the article

  • Ping: Destination Host Unreachable, from the destination host itself

    - by phunehehe
    I have a server that responds in a weird way to ping: $ ping hostname.com PING hostname.com (<IP address>) 56(84) bytes of data. From hostname.com (<IP address>) icmp_seq=1 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=2 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=3 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=4 Destination Host Unreachable I'm confused, as the messages come from the server that I want to ping, and at the same time it's saying Destination Host (itself) Unreachable. Pinging by IP address yields the same result. The server is online and operating normally. What could be the cause?

    Read the article

  • Excessive Outbound DNS Traffic

    - by user1318414
    I have a VPS system which I have had for 3 years on one host without issue. Recently, the host started sending an extreme amount of outbound DNS traffic to 31.193.132.138. Due to the way that Linode responded to this, I have recently left Linode and moved to 6sync. The server was completely rebuilt on 6sync with the exception of postfix mail configurations. Currently, the daemons run are as follows: sshd nginx postfix dovecot php5-fpm (localhost only) spampd (localhost only) clamsmtpd (localhost only) Given that the server was 100% rebuilt, I can't find any serious exploits against the above stated daemons, passwords have changed, ssh keys don't even exist on the rebuild yet, etc... it seems extremely unlikely that this is a compromise which is being used to DoS the address. The provided IP is noted online as a known SPAM source. My initial assumption was that it was attempting to use my postfix server as a relay, and the bogus addresses it was providing were domains with that IP registered as their nameservers. I would imagine given my postfix configuration that DNS queries for things such as SPF information would come in with equal or greater amount than the number of attempted spam e-mails sent. Both Linode and 6Sync have said that the outbound traffic is extremely disproportionate. The following is all the information I received from Linode regarding the outbound traffic: 21:28:28.647263 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647264 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647264 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647265 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647265 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647266 IP 97.107.134.33 > 31.193.132.138: udp 6sync cannot confirm whether or not the recent spike in outbound traffic was to the same IP or over DNS, but I have presumed as such. For now my server is blocking the entire 31.0.0.0/8 subnet to help deter this while I figure it out. Anyone have any idea what is going on?

    Read the article

  • Reasons for missing IP info in `last` output on pts logins?

    - by Mike Pennington
    I have five CentOS 6 linux systems at work, and encountered a rather strange issue that only seems to happen with my userid across all the linux systems I have... This is an example of the problem from entries I excepted from the last command... mpenning pts/19 Fri Nov 16 10:32 - 10:35 (00:03) mpenning pts/17 Fri Nov 16 10:21 - 10:42 (00:21) bill pts/15 sol-bill.local Fri Nov 16 10:19 - 10:36 (00:16) mpenning pts/1 192.0.2.91 Fri Nov 16 10:17 - 10:49 (12+00:31) kkim14 pts/14 192.0.2.225 Thu Nov 15 18:02 - 15:17 (4+21:15) gduarte pts/10 192.0.2.135 Thu Nov 15 12:33 - 08:10 (11+19:36) gduarte pts/9 192.0.2.135 Thu Nov 15 12:31 - 08:10 (11+19:38) kkim14 pts/0 :0.0 Thu Nov 15 12:27 - 15:17 (5+02:49) gduarte pts/6 192.0.2.135 Thu Nov 15 11:44 - 08:10 (11+20:25) kkim14 pts/13 192.0.2.225 Thu Nov 15 09:56 - 15:17 (5+05:20) kkim14 pts/12 192.0.2.225 Thu Nov 15 08:28 - 15:17 (5+06:49) kkim14 pts/11 192.0.2.225 Thu Nov 15 08:26 - 15:17 (5+06:50) dspencer pts/8 192.0.2.130 Wed Nov 14 18:24 still logged in mpenning pts/18 alpha-console-1. Mon Nov 12 14:41 - 14:46 (00:04) You can see two of my pts login entries above that do not have a source IP address associated with them. My CentOS machines have as many as six other users that share the systems, but the mpenning userid is the only one that has this issue. Approximately 5% of my logins see this issue, but no other usernames exhibit this behavior. Questions Given the kind of scripts I keep on these systems (which control much of our network infrastructure), I'm a little spooked by this and would like to understand what would cause my logins to occasionally miss source addresses. Is there anything (other than malicious activity) that would reasonably explain the behavior? Other than bash history timestamping, are there other things I can do to track the issue down? Informational Since this started happening, I enabled bash history time-stamping (i.e. HISTTIMEFORMAT="%y-%m-%d %T " in .bash_profile) and also added a few other bash history hacks; however, that does not give clues to what happened during the previous occurrences. All the systems run CentOS 6.3... [mpenning@typo ~]$ uname -a Linux typo.local 2.6.32-279.9.1.el6.x86_64 #1 SMP Tue Sep 25 21:43:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux [mpenning@typo ~]$ EDIT If I use last -i mpenning, I see entries like this... mpenning pts/19 0.0.0.0 Fri Nov 16 10:32 - 10:35 (00:03) mpenning pts/17 0.0.0.0 Fri Nov 16 10:21 - 10:42 (00:21)

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by Pawz
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

    Read the article

  • Setting up a DNS port redirect?

    - by Svetlana
    I have a domain using CloudFlare's DNS, I want to make it redirect to my server's IP (dynamic IP, port 21 blocked by ISP) which at the moment uses a No-IP DNS. The current setup is that I have a subdomain as a CNAME targetting the No-IP domain, but that only works for things like the Minecraft server (which looks for a set port that isn't blocked by my ISP), and I'd like a solution that lets me redirect port 21 from the CloudFlare domain to port 2121 on the No-IP domain, or something else that points to my dynamic IP, where an FTP server is already set up and running. I've had SRV records mentioned to me but without any further help, and it only made me more confused. Thanks in advance for the help.

    Read the article

  • Forward request through IPTables

    - by Jeremy
    I have a server running CentOS with 50 IP addresses on it. I was looking to use it as a proxy server (not just HTTP), but can't find any examples on how to set up the IP Tables. I want to proxy into IP-X and have my request look like its coming from IP-X. I currently do this on squid, but we need to proxy more than just HTTP traffic. Here is an example of the squid config: acl users src 255.255.255.255 #Locked down IP address acl all src 0.0.0.0/0.0.0.0 # http access rules http_access deny !users http_access allow users http_reply_access deny !users http_reply_access allow users icp_access deny all #ip_addresses acl ip3 myip 10.1.1.3 tcp_outgoing_address 10.1.1.3 ip3 Do to IP restrictions I need access to IMAP, POP and SMTP through a proxy. I want to use the server I already pay for that has 50 IPs on it as the proxy server.

    Read the article

  • NAT : understanding about interconnection

    - by PITCHY
    English version below J'ai 2 routeurs A et B relié en série avec les ip respectives ( 10.0.0.1/30 10.0.0.2/30) sur le routeur A j'ai activé la fonction NAT avec un pool (200.0.0.1 - 200.0.0.15/28). Lorsque je sors je prends donc un ip du pool par exemple 200.0.0.10. Comment ça fonctionne sachant que ma nouvelle ip (200.0.0.10) ne se trouve pas sur le meme réseau que mon interface de destination (10.0.0.2)? English: I have 2 routers A and B, interconnected with a serial connection, with the ip's 10.0.0.1/30 for A and 10.0.0.2/30 for B. On router A NAT was activated with the pool 200.0.0.1 - 200.0.0.15/28. When connection to this router, I get an ip from the pool, for example 200.0.0.10. Knowing my new ip is 200.0.0.10, which is not on the same network as my destination interface (10.0.0.2), how can this work?

    Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >