Search Results

Search found 2766 results on 111 pages for 'registry'.

Page 101/111 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• Using LogParser - part 2

  - by fatherjack

  PersonAddress.csv SalesOrderDetail.tsv In part 1 of this series we downloaded and installed LogParser and used it to list data from a csv file. That was a good start and in this article we are going to see the different ways we can stream data and choose whether a whole file is selected. We are also going to take a brief look at what file types we can interrogate. If we take the query from part 1 and add a value for the output parameter as -o:datagrid so that the query becomes LOGPARSER "SELECT top 15 * FROM C:\LP\person_address.csv" -o:datagrid and run that we get a different result. A pop-up dialog that lets us view the results in a resizable grid. Notice that because we didn't specify the columns we wanted returned by LogParser (we used SELECT *) is has added two columns to the recordset - filename and rownumber. This behaviour can be very useful as we will see in future parts of this series. You can click Next 10 rows or All rows or close the datagrid once you are finished reviewing the data. You may have noticed that the files that I am working with are different file types - one is a csv (comma separated values) and the other is a tsv (tab separated values). If you want to convert a file from one to another then LogParser makes it incredibly simple. Rather than using 'datagrid' as the value for the output parameter, use 'csv': logparser "SELECT SalesOrderID, SalesOrderDetailID, CarrierTrackingNumber, OrderQty, ProductID, SpecialOfferID, UnitPrice, UnitPriceDiscount, LineTotal, rowguid, ModifiedDate into C:\Sales_SalesOrderDetail.csv FROM C:\Sales_SalesOrderDetail.tsv" -i:tsv -o:csv Those familiar with SQL will not have to make a very big leap of faith to making adjustments to the above query to filter in/out records from the source file. Lets get all the records from the same file where the Order Quantity (OrderQty) is more than 25: logparser "SELECT SalesOrderID, SalesOrderDetailID, CarrierTrackingNumber, OrderQty, ProductID, SpecialOfferID, UnitPrice, UnitPriceDiscount, LineTotal, rowguid, ModifiedDate into C:\LP\Sales_SalesOrderDetailOver25.csv FROM C:\LP\Sales_SalesOrderDetail.tsv WHERE orderqty > 25" -i:tsv -o:csv Or we could find all those records where the Order Quantity is equal to 25 and output it to an xml file: logparser "SELECT SalesOrderID, SalesOrderDetailID, CarrierTrackingNumber, OrderQty, ProductID, SpecialOfferID, UnitPrice, UnitPriceDiscount, LineTotal, rowguid, ModifiedDate into C:\LP\Sales_SalesOrderDetailEq25.xml FROM C:\LP\Sales_SalesOrderDetail.tsv WHERE orderqty = 25" -i:tsv -o:xml All the standard comparison operators are to be found in LogParser; >, <, =, LIKE, BETWEEN, OR, NOT, AND. Input and Output file formats. LogParser has a pretty impressive list of file formats that it can parse and a good selection of output formats that will let you generate output in a format that is useable for whatever process or application you may be using. From any of these To any of these IISW3C: parses IIS log files in the W3C Extended Log File Format.   NAT: formats output records as readable tabulated columns. IIS: parses IIS log files in the Microsoft IIS Log File Format. CSV: formats output records as comma-separated values text. BIN: parses IIS log files in the Centralized Binary Log File Format. TSV: formats output records as tab-separated or space-separated values text. IISODBC: returns database records from the tables logged to by IIS when configured to log in the ODBC Log Format. XML: formats output records as XML documents. HTTPERR: parses HTTP error log files generated by Http.sys. W3C: formats output records in the W3C Extended Log File Format. URLSCAN: parses log files generated by the URLScan IIS filter. TPL: formats output records following user-defined templates. CSV: parses comma-separated values text files. IIS: formats output records in the Microsoft IIS Log File Format. TSV: parses tab-separated and space-separated values text files. SQL: uploads output records to a table in a SQL database. XML: parses XML text files. SYSLOG: sends output records to a Syslog server. W3C: parses text files in the W3C Extended Log File Format. DATAGRID: displays output records in a graphical user interface. NCSA: parses web server log files in the NCSA Common, Combined, and Extended Log File Formats. CHART: creates image files containing charts. TEXTLINE: returns lines from generic text files. TEXTWORD: returns words from generic text files. EVT: returns events from the Windows Event Log and from Event Log backup files (.evt files). FS: returns information on files and directories. REG: returns information on registry values. ADS: returns information on Active Directory objects. NETMON: parses network capture files created by NetMon. ETW: parses Enterprise Tracing for Windows trace log files and live sessions. COM: provides an interface to Custom Input Format COM Plugins. So, you can query data from any of the types on the left and really easily get it into a format where it is ready for analysis by other tools. To a DBA or network Administrator with an enquiring mind this is a treasure trove. In part 3 we will look at working with multiple sources and specifically outputting to SQL format. See you there!

  Read the article

• Help Protect Your Children with the CEOP Enhanced Internet Explorer 8

  - by Asian Angel

  Do you want to make Internet Explorer safer and more helpful for you and family? Then join us as we look at the CEOP (Child Exploitation and Online Protection Centre) enhanced version of Internet Explorer 8. Setting CEOP Up We chose to install the whole CEOP pack in order to have access to complete set of CEOP Tools. The install process will be comprised of two parts…it will begin with CEOP branded windows showing the components being installed… Note: The components can be downloaded separately for those who only want certain CEOP components added to their browser. Then it will move to the traditional Microsoft Internet Explorer 8 install windows. One thing that we did notice is that here you will be told that you will need to restart your computer but in other windows a log off/log on process is mentioned. Just to make certain that everything goes smoothly we recommend restarting your computer when the installation process is complete. In the EULA section you can see the versions of Windows that the CEOP Pack works with. Once you get past the traditional Microsoft install windows you will be dropped back into the CEOP branded windows. CEOP in Action After you have restarted your computer and opened Internet Explorer you will notice that your homepage has been changed. When it comes to your children that is not a bad thing in this instance. It will also give you an opportunity to look through the CEOP online resources. For the moment you may be wondering where everything is but do not worry. First you can find the two new search providers in the drop-down menu for your “Search Bar” and select a new default if desired. The second thing to look for are the new links that have been added to your “Favorites Menu”. These links can definitely be helpful for you and your family. The third part will require your “Favorites Bar” to be visible in order to see the “Click CEOP Button”. If you have not previously done so you will need to turn on subscribing for “Web Slices”. Click on “Yes” to finish the subscription process. Clicking on the “CEOP Button” again will show all kinds of new links to help provide information for you and your children. Notice that the top part is broken down into “topic categories” while the bottom part is set up for “age brackets”…very nice for helping you focus on the information that you want and/or need. Looking for information and help on a particular topic? Clicking on the “Cyberbullying Link” for example will open the following webpage with information about cyberbullying and a link to get help with the problem. Need something that is focused on your child’s age group? Clicking on the “8-10? Link” as an example opened this page. Want information that is focused on you? The “Parent? Link” leads to this page. The “topic categories & age brackets” make the CEOP Button a very helpful and “family friendly” addition to Internet Explorer. Perhaps you (or your child) want to conduct a search for something that is affecting your child. As you type in a “search term” both of the search providers will provide helpful suggestions for dealing with the problem. We felt that these were very nice suggestions in both instances here… Conclusion We have been able to give you a good peek at what the CEOP Tools can do but the best way to see how helpful it can be for you and your family is try it for yourself. Your children’s safety and happiness is worth it. Links Download the Internet Explorer CEOP Pack (link at bottom of webpage) Note: If you are interested in a singular component or only some use these links. Download the Click CEOP Button Download Search CEOP Download Internet Safety and Security Search Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPWhen to Use Protect Tab vs Lock Tab in FirefoxMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarQuick Hits: 11 Firefox Tab How-Tos TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI

  Read the article

• Create Chemistry Equations and Diagrams in Word

  - by Matthew Guay

  Microsoft Word is a great tool for formatting text, but what if you want to insert a chemistry formula or diagram?  Thanks to a new free add-in for Word, you can now insert high-quality chemistry formulas and diagrams directly from the Ribbon in Word. Microsoft’s new Education Labs has recently released the new Chemistry Add-in for Word 2007 and 2010.  This free download adds support for entering and editing chemistry symbols, diagrams, and formulas using the standard XML based Chemical Markup Language.  You can convert any chemical name, such as benzene, or formula, such as H2O, into a chemical diagram, standard name, or formula.  Whether you’re a professional chemist, just taking chemistry in school, or simply curious about the makeup of Citric Acid, this add-in is an exciting way to bring chemistry to your computer. This add-in works great on Word 2007 and 2010, including the 64 bit version of Word 2010.  Please note that the current version is still in beta, so only run it if you are comfortable running beta products. Getting Started Download the Chemistry add-in from Microsoft Education Labs (link below), and unzip the file.  Then, run the ChemistryAddinforWordBeta2.Setup.msi. It may inform you that you need to install the Visual Studio Tools for Office 3.0.  Simply click Yes to download these tools. This will open the download in your default browser.  Simply click run, or save and then run it when it is downloaded. Now, click next to install the Visual Studio Tools for Office as usual. When this is finished, run the ChemistryAddinforWordBeta2.Setup.msi again.  This time, you can easily install it with the default options. Once it’s finished installing, open Word to try out the Chemistry Add-in.  You will be asked if you want to install this customization, so click Install to enable it. Now you will have a new Chemistry tab in your Word ribbon.  Here’s the ribbon in Word 2010… And here it is in Word 2007.   Using the Chemistry Add-in It’s very easy to insert nice chemistry diagrams and formulas in Word with the Chemistry add-in.  You can quickly insert a premade diagram from the Chemistry Gallery: Or you can insert a formula from file.  Simply click “From File” and choose any Chemical Markup Language (.cml) formatted file to insert the chemical formula. You can also convert any chemical name to it’s chemical form.  Simply select the word, right-click, select “Convert to Chemistry Zone” and then click on its name. Now you can see the chemical form in the sidebar if you click the Chemistry Navigator button, and can choose to insert the diagram into the document.  Some chemicals will automatically convert to the diagram in the document, while others simply link to it in the sidebar.  Either way, you can display exactly what you want. You can also convert a chemical formula directly to it’s chemical diagram.  Here we entered H2O and converted it to Chemistry Zone: This directly converted it to the diagram directly in the document. You can click the Edit button on the top, and from there choose to either edit the 2D model of the chemical, or edit the labels. When you click Edit Labels, you may be asked which form you wish to display.  Here’s the options for potassium permanganate: You can then edit the names and formulas, and add or remove any you wish. If you choose to edit the chemical in 2D, you can even edit the individual atoms and change the chemical you’re diagramming.  This 2D editor has a lot of options, so you can get your chemical diagram to look just like you want. And, if you need any help or want to learn more about the Chemistry add-in and its features, simply click the help button in the Chemistry Ribbon.  This will open a Word document containing examples and explanations which can be helpful in mastering all the features of this add-in. All of this works perfectly, whether you’re running it in Word 2007 or 2010, 32 or 64 bit editions. Conclusion Whether you’re using chemistry formulas everyday or simply want to investigate a chemical makeup occasionally, this is a great way to do it with tools you already have on your computer.  It will also help make homework a bit easier if you’re struggling with it in high school or college. Links Download the Chemistry Add-in for Word Introducing Chemistry Add-in for Word – MSDN blogs Chemistry Markup Language – Wikipedia Similar Articles Productive Geek Tips Geek Reviews: Using Dia as a Free Replacement for Microsoft VisioEasily Summarize A Word 2007 DocumentCreate a Hyperlink in a Word 2007 Flow Chart and Hide Annoying ScreenTipsHow To Create and Publish Blog Posts in Word 2010 & 2007Using Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

  Read the article

• Figuring out the IIS Version for a given OS in .NET Code

  - by Rick Strahl

  Here's an odd requirement: I need to figure out what version of IIS is available on a given machine in order to take specific configuration actions when installing an IIS based application. I build several configuration tools for application configuration and installation and depending on which version of IIS is available on IIS different configuration paths are taken. For example, when dealing with XP machine you can't set up an Application Pool for an application because XP (IIS 5.1) didn't support Application pools. Configuring 32 and 64 bit settings are easy in IIS 7 but this didn't work in prior versions and so on. Along the same lines I saw a question on the AspInsiders list today, regarding a similar issue where somebody needed to know the IIS version as part of an ASP.NET application prior to when the Request object is available. So it's useful to know which version of IIS you can possibly expect. This should be easy right? But it turns there's no real easy way to detect IIS on a machine. There's no registry key that gives you the full version number - you can detect installation but not which version is installed. The easiest way: Request.ServerVariables["SERVER_SOFTWARE"] The easiest way to determine IIS version number is if you are already running inside of ASP.NET and you are inside of an ASP.NET request. You can look at Request.ServerVariables["SERVER_SOFTWARE"] to get a string like Microsoft-IIS/7.5 returned to you. It's a cinch to parse this to retrieve the version number. This works in the limited scenario where you need to know the version number inside of a running ASP.NET application. Unfortunately this is not a likely use case, since most times when you need to know a specific version of IIS when you are configuring or installing your application. The messy way: Match Windows OS Versions to IIS Versions Since Version 5.x of IIS versions of IIS have always been tied very closely to the Operating System. Meaning the only way to get a specific version of IIS was through the OS - you couldn't install another version of IIS on the given OS. Microsoft has a page that describes the OS version to IIS version relationship here: http://support.microsoft.com/kb/224609 In .NET you can then sniff the OS version and based on that return the IIS version. The following is a small utility function that accomplishes the task of returning an IIS version number for a given OS: /// <summary> /// Returns the IIS version for the given Operating System. /// Note this routine doesn't check to see if IIS is installed /// it just returns the version of IIS that should run on the OS. /// /// Returns the value from Request.ServerVariables["Server_Software"] /// if available. Otherwise uses OS sniffing to determine OS version /// and returns IIS version instead. /// </summary> /// <returns>version number or -1 </returns> public static decimal GetIisVersion() { // if running inside of IIS parse the SERVER_SOFTWARE key // This would be most reliable if (HttpContext.Current != null && HttpContext.Current.Request != null) { string os = HttpContext.Current.Request.ServerVariables["SERVER_SOFTWARE"]; if (!string.IsNullOrEmpty(os)) { //Microsoft-IIS/7.5 int dash = os.LastIndexOf("/"); if (dash > 0) { decimal iisVer = 0M; if (Decimal.TryParse(os.Substring(dash + 1), out iisVer)) return iisVer; } } } decimal osVer = (decimal) Environment.OSVersion.Version.Major + ((decimal) Environment.OSVersion.Version.MajorRevision / 10); // Windows 7 and Win2008 R2 if (osVer == 6.1M) return 7.5M; // Windows Vista and Windows 2008 else if (osVer == 6.0M) return 7.0M; // Windows 2003 and XP 64 bit else if (osVer == 5.2M) return 6.0M; // Windows XP else if (osVer == 5.1M) return 5.1M; // Windows 2000 else if (osVer == 5.0M) return 5.0M; // error result return -1M; } } Talk about a brute force apporach, but it works. This code goes only back to IIS 5 - anything before that is not something you possibly would want to have running. :-) Note that this is updated through Windows 7/Windows Server 2008 R2. Later versions will need to be added as needed. Anybody know what the Windows Version number of Windows 8 is?© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  IIS   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• .NET 3.5 Installation Problems in Windows 8

  - by Rick Strahl

  Windows 8 installs with .NET 4.5. A default installation of Windows 8 doesn't seem to include .NET 3.0 or 3.5, although .NET 2.0 does seem to be available by default (presumably because Windows has app dependencies on that). I ran into some pretty nasty compatibility issues regarding .NET 3.5 which I'll describe in this post. I'll preface this by saying that depending on how you install Windows 8 you may not run into these issues. In fact, it's probably a special case, but one that might be common with developer folks reading my blog. Specifically it's the install order that screwed things up for me -  installing Visual Studio before explicitly installing .NET 3.5 from Windows Features - in particular. If you install Visual Studio 2010 I highly recommend you install .NET 3.5 from Windows features BEFORE you install Visual Studio 2010 and save yourself the trouble I went through. So when I installed Windows 8, and then looked at the Windows Features to install after the fact in the Windows Feature dialog, I thought - .NET 3.5 - who needs it. I'd be happy to not have to install .NET 3.5, but unfortunately I found out quite a while after initial installation that one of my applications/tools (DevExpress's awesome CodeRush) depends on it and won't install without it. Enabling .NET 3.5 in Windows 8 If you want to run .NET 3.5 on Windows 8, don't download an installer - those installers don't work on Windows 8, and you don't need to do this because you can use the Windows Features dialog to enable .NET 3.5: And that *should* do the trick. If you do this before you install other apps that require .NET 3.5 and install a non-SP1 one version of it, you are going to have no problems. Unfortunately for me, even after I've installed the above, when I run the CodeRush installer I still get this lovely dialog: Now I double checked to see if .NET 3.5 is installed - it is, both for 32 bit and 64 bit. I went as far as creating a small .NET Console app and running it to verify that it actually runs. And it does… So naturally I thought the CodeRush installer is a little whacky. After some back and forth Alex Skorkin on Twitter pointed me in the right direction: He asked me to look in the registry for exact info on which version of .NET 3.5 is installed here: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP where I found that .NET 3.5 SP1 was installed. This is the 64 bit key which looks all correct. However, when I looked under the 32 bit node I found: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5 Notice that the service pack number is set to 0, rather than 1 (which it was for the 64 bit install), which is what the installer requires. So to summarize: the 64 bit version is installed with SP1, the 32 bit version is not. Uhm, Ok… thanks for that! Easy to fix, you say - just install SP1. Nope, not so easy because the standalone installer doesn't work on Windows 8. I can't get either .NET 3.5 installer or the SP 1 installer to even launch. They simply start and hang (or exit immediately) without messages. I also tried to get Windows to update .NET 3.5 by checking for Windows Updates, which should pick up on the dated version of .NET 3.5 and pull down SP1, but that's also no go. Check for Updates doesn't bring down any updates for me yet. I'm sure at some random point in the future Windows will deem it necessary to update .NET 3.5 to SP1, but at this point it's not letting me coerce it to do it explicitly. How did this happen I'm not sure exactly whether this is the cause and effect, but I suspect the story goes like this: Installed Windows 8 without support for .NET 3.5 Installed Visual Studio 2010 which installs .NET 3.5 (no SP) I now had .NET 3.5 installed but without SP1. I then: Tried to install CodeRush - Error: .NET 3.5 SP1 required Enabled .NET 3.5 in Windows Features I figured enabling the .NET 3.5 Windows Features would do the trick. But still no go. Now I suspect Visual Studio installed the 32 bit version of .NET 3.5 on my machine and Windows Features detected the previous install and didn't reinstall it. This left the 32 bit install at least with no SP1 installed. How to Fix it My final solution was to completely uninstall .NET 3.5 *and* to reboot: Go to Windows Features Uncheck the .NET Framework 3.5 Restart Windows Go to Windows Features Check .NET Framework 3.5 and voila, I now have a proper installation of .NET 3.5. I tried this before but without the reboot step in between which did not work. Make sure you reboot between uninstalling and reinstalling .NET 3.5! More Problems The above fixed me right up, but in looking for a solution it seems that a lot of people are also having problems with .NET 3.5 installing properly from the Windows Features dialog. The problem there is that the feature wasn't properly loading from the installer disks or not downloading the proper components for updates. It turns out you can explicitly install Windows features using the DISM tool in Windows.dism.exe /online /enable-feature /featurename:NetFX3 /Source:f:\sources\sxs You can try this without the /Source flag first - which uses the hidden Windows installer files if you kept those. Otherwise insert the DVD or ISO and point at the path \sources\sxs path where the installer lives. This also gives you a little more information if something does go wrong.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Hack Extension Files to Make Them Version-Compatible for Firefox

  - by Asian Angel

  A well known drawback in using Firefox is the problem with extension compatibility when a new major version is released. Whether it is for a new extension that you are trying for the first time or an old favorite we have a way to get those extensions working for you again. There are multiple reasons why you might want to choose this method to fix a non-compatible extension: You are uncomfortable with tweaking the “about:config” settings You prefer to maintain the original “about:config” settings in a pristine state and like having compatibility checking active You are looking to gain some “geek cred” Keep in mind that most extensions will work perfectly well with a new version of Firefox and simply have the “version compatibility number” problem. But once in a while there may be one that needs to have some work done on it by the extension’s author. The Problem Here is a perfect example of everyone’s least favorite “extension message”. This is the last thing that you need when all that you want is for your favorite extension (or a new one) to work on a fresh clean install. Note: This works nicely to “replace” non-compatible extensions already present in your browser if you are simply upgrading. Hacking the XPI File For this procedure you will need to manually download the extension to your hard-drive (right click on the extension’s “Install Button” and select “Save As”). Once you have done that you are ready to start hacking the extension. For our example we chose the “GCal Popup Extension”. The best thing to do is place the extension in a new folder (i.e. the Desktop or other convenient location) then unzip it just the same way that you would with any regular zip file. Once it is unzipped you will see the various folders and files that were in the “xpi file” (we had four files here but depending on the extension the number may vary). There is only one file that you need to focus on…the “install.rdf” file. Note: At this point you should move the original extension file to a different location (i.e. outside of the folder) so that it is no longer present. Open the file in “Notepad” so that you can change the number for the “maxVersion”. Here the number is listed as “3.5.*” but we needed to make it higher… Replacing the “5” with a “7” is all that we needed to do. Once you have entered your new “maxVersion” number save the file. At this point you will need to re-zip all of the files back into a single file. Make certain that you “create” a file with the “.zip file extension” otherwise this will not work. Once you have the new zip file created you will need to rename the entire file including the “file extension”. For our example we copied and pasted the original extension name. Once you have changed the name click outside of the “text area”. You will see a small message window like this asking for confirmation…click “Yes” to finish the process. Now your modified/updated extension is ready to install. Drag the extension into your browser to install it and watch that wonderful “Restart to complete the installation.” message appear. As soon as your browser starts you can check the “Add-ons Manager Window” and see the version compatibility numbers for the extension. Looking very very nice! And just like that your extension should be up and running without any problems. Conclusion If you are looking to try something new, gain some geek cred, or just want to keep your Firefox install as close to the original condition as possible this method should get those extensions working nicely for you again. Similar Articles Productive Geek Tips Make Firefox Extensions Compatible After Firefox Update Breaks Them For No Good ReasonCheck Extension Compatibility for Upcoming Firefox ReleasesFirefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible ExtensionsHow To Force Extension Compatibility with Firefox 3.6+Test and Report Add-on Compatibility in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

  Read the article

• Change the User Interface Language in Vista or Windows 7

  - by Matthew Guay

  Would you like to change the user interface language in any edition of Windows 7 or Vista on your computer?  Here’s a free app that can help you do this quickly and easily. If your native language is not the one most spoken in your area, you’ve likely purchased a PC with Windows preinstalled with a language that is difficult or impossible for you to use.  Windows 7 and Vista Ultimate include the ability to install multiple user interface languages and switch between them. However, all other editions are stuck with the language they shipped with.  With the free Vistalizator app, you can add several different interface languages to any edition of Vista or Windows 7 and easily switch between them. Note:  In this test, we used an US English copy of both Windows 7 Home Premium and Windows Vista Home Premium, and it works the same on any edition. The built-in language switching in the Ultimate Editions lets you set a user interface language for each user account, but this will only switch it for all users.  Add a User Interface Language to Windows To add an interface language to any edition of Windows 7 and Vista, first download Vistalizator (link below).  Then, from the same page, download the language pack of your choice.  The language packs are specific for each service pack of Windows, so make sure to choose the correct version and service pack you have installed. Once the downloads are finished, launch the Vistalizator program. You do not need to install it; simply run it and you’re ready to go.  Click the Add languages button to add a language to Windows. Select the user interface language pack you downloaded, and click Open. Depending on the language you selected, it may not automatically update with Windows Update when a service pack is released.  If so, you will have to remove the language pack and reinstall the new one for that service pack at that time.  Click Ok to continue. Make sure you’ve selected the correct language, and click Install language. Vistalizator will extract and install the language pack.  This took around 5 to 10 minutes in our test. Once the language pack is installed, click Yes to make it the default display language. Now, you have two languages installed in Windows.  You may be prompted to check for updates to the language pack; if so, click Update languages and Vistalizator will automatically check for and install any updates. When finished, exit Vistalizator to finish switching the language.  Click Yes to automatically reboot and apply the changes. When you computer reboots, it will show your new language, which in our test is Thai.  Here’s our Windows 7 Home Premium machine with the Thai language pack installed and running. You can even add a right to left language, such as Arabic, to Windows.  Simply repeat the steps to add another language pack.    Vistalizator was originally designed for Windows Vista, and works great with Windows 7 too.  The language packs for Vista are larger downloads than their Windows 7 counterparts.  Here’s our Vista Home Premium in English… And here’s how it looks after installing the Simplified Chinese language pack with Vistalizator. Revert to Your Original Language If you wish to return to the language that your computer shipped with, or want to switch to another language you’ve installed, run Vistalizator again.  Select the language you wish to use, and click Change language.   When you close Vistalizator, you will again be asked to reboot.  Once you’ve rebooted, you’ll see your new (or original) language ready to use.  Here’s our Windows 7 Home Premium desktop, back in it’s original English interface. Conclusion This is a great way to change your computer’s language into your own native language, and is especially useful for expatriates around the world.  Also, if you’d like to simply change or add an input language instead of changing the language throughout your computer, check out our tutorial on How to Add Keyboard Languages to XP, Vista, and Windows 7. Download Vistalizator Similar Articles Productive Geek Tips Enable Military Time in Windows 7 or VistaWhy Does My Password Expire in Windows?Use Windows Vista Aero through Remote Desktop ConnectionDisable User Account Control (UAC) the Easy Way on Win 7 or VistaAdd keyboard languages to XP, Vista, and Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Games to Vista Game explorer with Inno Setup

  - by Kraemer

  Ok, i'm trying to force my inno setup installer to add a shortcut of my game to Vista Games Explorer. Theoretically this should do the trick: [Files] Source: "GameuxInstallHelper.dll"; DestDir: "{app}"; Flags: ignoreversion overwritereadonly; [Registry] Root: HKLM; Subkey: SOFTWARE\dir\dir; Flags: uninsdeletekeyifempty Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: Path; ValueType: String; ValueData: {app}; Flags: uninsdeletekey Root: HKLM; Subkey: SOFTWARE\dir\dir; ValueName: AppFile; ValueType: String; ValueData:{app}\executable.exe ; Flags: uninsdeletekey [CustomMessages] en.Local=en en.removemsg=Do you wish to remove game saves and settings? en.taskentry=Play [Code] const PlayTask = 0; AllUsers = 2; Current = 3; type TGUID = record Data1: Cardinal; Data2, Data3: Word; Data4: array [0..7] of char; end; var GUID: TGUID; function GetDC(HWND: DWord): DWord; external '[email protected] stdcall'; function GetDeviceCaps(DC: DWord; Index: Integer): Integer; external '[email protected] stdcall'; function ReleaseDC(HWND: DWord;DC: DWord): Integer; external '[email protected] stdcall'; function ShowWindow(hWnd: DWord; nCmdShow: Integer): boolean; external '[email protected] stdcall'; function SetWindowLong(hWnd: DWord; nIndex: Integer; dwNewLong: Longint):Longint; external '[email protected] stdcall'; function GenerateGUID(var GUID: TGUID): Cardinal; external 'GenerateGUID@files:GameuxInstallHelper.dll stdcall setuponly'; function AddToGameExplorer(Binary: String; Path: String; InstallType: Integer; var GUID: TGUID): Cardinal; external 'AddToGameExplorerW@files:GameuxInstallHelper.dll stdcall setuponly'; function CreateTask(InstallType: Integer; var GUID: TGUID; TaskType: Integer; TaskNumber: Integer; TaskName: String; Binary: String; Parameters: String): Cardinal; external 'CreateTaskW@files:GameuxInstallHelper.dll stdcall setuponly'; function RetrieveGUIDForApplication(Binary: String; var GUID: TGUID): Cardinal; external 'RetrieveGUIDForApplicationW@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveFromGameExplorer(var GUID: TGUID): Cardinal; external 'RemoveFromGameExplorer@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function RemoveTasks(var GUID: TGUID): Cardinal; external 'RemoveTasks@{app}\GameuxInstallHelper.dll stdcall uninstallonly'; function InitializeSetup(): Boolean; var appath: string; ResultCode: Integer; begin if RegKeyExists(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir') then begin RegQueryStringValue(HKEY_LOCAL_MACHINE, 'SOFTWARE\dir\dir', 'Path', appath) Exec((appath +'\unins000.exe'), '', '', SW_SHOW, ewWaitUntilTerminated, ResultCode) end else begin Result := TRUE end; end; procedure CurUninstallStepChanged(CurUninstallStep: TUninstallStep); begin if CurUninstallStep = usUninstall then begin if GetWindowsVersion shr 24 > 5 then begin RetrieveGUIDForApplication(ExpandConstant('{app}\AWL_Release.dll'), GUID); RemoveFromGameExplorer(GUID); RemoveTasks(GUID); UnloadDll(ExpandConstant('{app}\GameuxInstallHelper.dll')); end; end; if CurUninstallStep = usPostUninstall then begin if MsgBox(ExpandConstant('{cm:removemsg}'), mbConfirmation, MB_YESNO)=IDYES then begin DelTree(ExpandConstant('{app}'), True, True, True); end; end; end; procedure CurStepChanged(CurStep: TSetupStep); begin if GetWindowsVersion shr 24 > 5 then begin if CurStep = ssInstall then GenerateGUID(GUID); if CurStep = ssPostInstall then begin AddToGameExplorer(ExpandConstant('{app}\AWL_Release.dll'), ExpandConstant('{app}'), Current, GUID); CreateTask(3, GUID, PlayTask, 0, ExpandConstant('{cm:taskentry}'), ExpandConstant('{app}\executable.exe'), ''); CreateTask(3, GUID, 1, 0, 'Game Website', 'http://www.gamewebsite.com/', ''); end; end; end; The installer works just fine, but it doesn't place a shortcut of my game to Games explorer. Since i believe that the problem is on the binary file i guess for that part i should ask for some help. So, can anyone please give me a hand here?

  Read the article

• How to Increase the VMWare Boot Screen Delay

  - by Trevor Bekolay

  If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

  Read the article

• Create a Slide Show in Windows 7 Media Center

  - by DigitalGeekery

  Are you looking for a nice way to create and display a slide show from your photo collection? Today we’ll show you how to create a slide show, how to add music to it, and watch it from the comfort of your couch in Windows 7 Media Center. Create Slide Show Launch Windows 7 Media Center and click on the Picture Library tile found under Pictures and Videos.   In the Pictures Library, scroll across to slide shows and click on Create Slide show.   Enter a name for the slide show and click Next.   If you are using a Windows Media Center remote, click on the OK button to bring up the onscreen keyboard. Use the directional buttons to navigate across the keyboard and press OK to select each letter. Click Done when finished. Select Picture Library and click Next. Select the pictures to include in your slide show. If using a remote, navigate through the images and press OK to select. If you are using a mouse, simply click on the selections. When you are finished, click Next.    Now, we can review and edit the slide show. Click the up or down pointing arrows to move pictures up and down in the order.  (more intuitive titles would be helpful in this case as opposed to the randomly generated titles in the example below) If you are finished, click Create. You can also choose to go back and add music to your slide show. (or even more pictures) We’ll take a look at adding some music in our example. Click on the Add More button.   Add Music to Your Slide Show Here we’ll select Music Library to add a song. Click Next.   You’ll now be able to browse your Music Library to select songs for your slide show. Select your songs and click Next.   When you are finished adding Music and Pictures click Create.   Once your slide show is saved, you can play it any time by going to clicking on slide shows in the Picture Library, then selecting the slide show title. Select play slide show when you’re ready to enjoy your new production.   If you ever want to edit or delete the slide show, select it in the Picture Library, and scroll to Actions. You’ll see those option under additional commands. You have the option to Edit Slide Show, Burn a CD/DVD, or Delete. Editing Slide Show Settings Within Media Center, go to Tasks… Click on Pictures…   Then choose Slide Shows. From the Slide Show settings you have the option to Show pictures in random order, Show picture information, Show song information, and Use Pan and zoom effect. You can also adjust the length of time to display each picture, and change the background color. Be sure to click Save to apply and changes before exiting. If you choose to show picture information, the picture title, date, and star rating will be displayed in the top right.   If your slide show is accompanied by music and you choose to show song information, you will get a translucent overlay for a few seconds at the beginning of each song to indicate the song, album, and artist. One of the really cool things about creating a slide show in Windows 7 Media Center is you can complete the entire process using just a Media Center remote. Can’t get enough slide shows? Check out how to turn your desktop into a picture slide show in Windows 7. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Add Color Coding to Windows 7 Media Center Program GuideIntegrate Boxee with Media Center in Windows 7Schedule Updates for Windows Media CenterTurn Your Desktop into a Picture Slideshow in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

  Read the article

• Preview and Purchase Ebooks with Kindle for PC

  - by Matthew Guay

  Want to look over a new book, or buy it immediately in ebook format?  Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store.  The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books.  With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first.  With Kindle for PC, however, you can download a sample of any ebook available for free.  The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview.  Click the Go to Kindle for PC button to open Kindle and read your ebook preview.   Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left.  All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover.  Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it.  Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon.  Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before.  Refresh Kindle for PC, and your new ebook will automatically download.  Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book.  Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks.  Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free.  Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”.  Notice that this book shows it’s price is $0.00, but the button still says Buy now.  Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh.  Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account.  Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this.  If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync.  You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC.  Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

  Read the article

• doubleTwist is an iTunes Alternative that Supports Several Devices

  - by Mysticgeek

  There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

  Read the article

• Change the Default Font Size in Word

  - by Matthew Guay

  Are you frustrated by always having to change the font size before you create a document it Word?  Here’s how you can end that frustration and set your favorite default font size for once and for all! Microsoft changed the default font font to 11 point Calibri in Word 2007 after years of 12 point Times New Roman being the default.  Although it can be easily overlooked, there are ways in Word to change the default settings to anything you want.  Whether you want to change your default to 12 point Calibri or to 48 point Comic Sans…here’s how to change your default font settings in Word 2007 and 2010. Changing Default Fonts in Word To change the default font settings, click the small box with an arrow in the right left corner of the Font section of the Home tab in the Ribbon.   In the Font dialog box, choose the default font settings you want.  Notice in the Font box it says “+Body”; this means that the font will be chosen by the document style you choose, and you are only selecting the default font style and size.  So, if your style uses Calibri, then your font will be Calibri at the size and style you chose.  If you’d prefer to choose a specific font to be the default, just select one from the drop-down box and this selection will override the font selection in your document style. Here we left all the default settings, except we selected 12 point font in the Latin text box (this is your standard body text; users of Asian languages such as Chinese may see a box for Asian languages).  When you’ve made your selections, click the “Set as Default” button in the bottom left corner of the dialog. You will be asked to confirm that you want these settings to be made default.  In Word 2010, you will be given the option to set these settings for this document only or for all documents.  Click the bullet beside “All documents based on the Normal.dotm template?”, and then click Ok. In Word 2007, simply click Ok to save these settings as default. Now, whenever you open Word or create a new document, your default font settings should be set exactly to what you want.  And simply repeat these steps to change your default font settings again if you want. Editing your default template file Another way to change your default font settings is to edit your Normal.dotm file.  This file is what Word uses to create new documents; it basically copies the formatting in this document each time you make a new document. To edit your Normal.dotm file, enter the following in the address bar in Explorer or in the Run prompt: %appdata%\Microsoft\Templates This will open your Office Templates folder.  Right-click on the Normal.dotm file, and click Open to edit it.  Note: Do not double-click on the file, as this will only create a new document based on Normal.dotm and any edits you make will not be saved in this file.   Now, change any font settings as you normally would.  Remember: anything you change or enter in this document will appear in any new document you create using Word. If you want to revert to your default settings, simply delete your Normal.dotm file.  Word will recreate it with the standard default settings the next time you open Word. Please Note: Changing your default font size will not change the font size in existing documents, so these will still show the settings you used when these documents were created.  Also, some addins can affect your Normal.dotm template.  If Word does not seem to remember your font settings, try disabling Word addins to see if this helps. Conclusion Sometimes it’s the small things that can be the most frustrating.  Getting your default font settings the way you want is a great way to take away a frustration and make you more productive. And here’s a quick question: Do you prefer the new default 11 point Calibri, or do you prefer 12 point Times New Roman or some other combination?  Sound off in the comments, and let the world know your favorite font settings. Similar Articles Productive Geek Tips Change the Default Font in Excel 2007Add Emphasis to Paragraphs with Drop Caps in Word 2007Keep Websites From Using Tiny Fonts in SafariMake Word 2007 Always Save in Word 2003 FormatStupid Geek Tricks: Enable More Fonts for the Windows Command Prompt TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player

  Read the article

• Recover that Photo, Picture or File You Deleted Accidentally

  - by The Geek

  Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick. Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. The great news is that this technique also works if you accidentally deleted the photo… from the camera itself. That’s what happened to me, and prompted writing this article. Restore that File or Photo using Recuva The first piece of software that you’ll want to try is called Recuva, and it’s extremely easy to use—just make sure when you are installing it, that you don’t accidentally install that stupid Yahoo! toolbar that nobody wants. Now that you’ve installed the software, and avoided an awful toolbar installation, launch the Recuva wizard and let’s start through the process of recovering those pictures you shouldn’t have deleted. The first step on the wizard page will let you tell Recuva to only search for a specific type of file, which can save a lot of time while searching, and make it easier to find what you are looking for. Next you’ll need to specify where the file was, which will obviously be up to wherever you deleted it from. Since I deleted mine from my camera’s SD card, that’s where I’m looking for it. The next page will ask you whether you want to do a Deep Scan. My recommendation is to not select this for the first scan, because usually the quick scan can find it. You can always go back and run a deep scan a second time. And now, you’ll see all of the pictures deleted from your drive, memory stick, SD card, or wherever you searched. Looks like what happened in Vegas didn’t stay in Vegas after all… If there are a really large number of results, and you know exactly when the file was created or modified, you can switch to the advanced view, where you can sort by the last modified time. This can help speed up the process quite a bit, so you don’t have to look through quite as many files. At this point, you can right-click on any filename, and choose to Recover it, and then save the files elsewhere on your drive. Awesome! Restore that File or Photo using DiskDigger If you don’t have any luck with Recuva, you can always try out DiskDigger, another excellent piece of software. I’ve tested both of these applications very thoroughly, and found that neither of them will always find the same files, so it’s best to have both of them in your toolkit. Note that DiskDigger doesn’t require installation, making it a really great tool to throw on your PC repair Flash drive. Start off by choosing the drive you want to recover from…   Now you can choose whether to do a deep scan, or a really deep scan. Just like with Recuva, you’ll probably want to select the first one first. I’ve also had much better luck with the regular scan, rather than the “dig deeper” one. If you do choose the “dig deeper” one, you’ll be able to select exactly which types of files you are looking for, though again, you should use the regular scan first. Once you’ve come up with the results, you can click on the items on the left-hand side, and see a preview on the right.  You can select one or more files, and choose to restore them. It’s pretty simple! Download DiskDigger from dmitrybrant.com Download Recuva from piriform.com Good luck recovering your deleted files! And keep in mind, DiskDigger is a totally free donationware software from a single, helpful guy… so if his software helps you recover a photo you never thought you’d see again, you might want to think about throwing him a dollar or two. Similar Articles Productive Geek Tips Stupid Geek Tricks: Undo an Accidental Move or Delete With a Keyboard ShortcutRestore Accidentally Deleted Files with RecuvaCustomize Your Welcome Picture Choices in Windows VistaAutomatically Resize Picture Attachments in Outlook 2007Resize Your Photos with Easy Thumbnails TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Help Prevent Carpal Tunnel Problems with Workrave

  - by Matthew Guay

  Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• Check Your Spelling, Grammar, and Style in Firefox and Chrome

  - by Matthew Guay

  Are you tired of making simple writing mistakes that get past your browser’s spell-check?  Here’s how you can get advanced grammar check and more in Firefox and Chrome with After the Deadline. Microsoft Word has spoiled us with grammar, syntax, and spell checking, but the default spell check in Firefox and Chrome still only does basic checks.  Even webapps like Google Docs don’t check more than basic spelling errors.  However, WordPress.com is an exception; it offers advanced spelling, grammar, and syntax checking with its After the Deadline proofing system.  This helps you keep from making embarrassing mistakes on your blog posts, and now, thanks to a couple free browser plugins, it can help you keep from making these mistakes in any website or webapp. After the Deadline in Google Chrome Add the After the Deadline extension (link below) to Chrome as usual. As soon as it’s installed, you’re ready to start improving your online writing.  To check spelling, grammar, and more, click the ABC button that you’ll now see at the bottom of most text boxes online. After a quick scan, grammar mistakes are highlighted in green, complex expressions and other syntax problems are highlighted in blue, and spelling mistakes are highlighted in red as would be expected.  Click on an underlined word to choose one of its recommended changes or ignore the suggestion. Or, if you want more explanation about what was wrong with that word or phrase, click Explain for more info. And, if you forget to run an After the Deadline scan before submitting a text entry, it will automatically check to make sure you still want to submit it.  Click Cancel to go back and check your writing first.   To change the After the Deadline settings, click its icon in the toolbar and select View Options.  Additionally, if you want to disable it on the site you’re on, you can click Disable on this site directly from the popup. From the settings page, you can choose extra things to check for such as double negatives and redundant phrases, as well as add sites and words to ignore. After the Deadline in Firefox Add the After the Deadline add-on to Firefox (link below) as normal. After the Deadline basically the same in Firefox as it does in Chrome.  Select the ABC icon in the lower right corner of textboxes to check them for problems, and After the Deadline will underline the problems as it did in Chrome.  To view a suggested change in Firefox, right-click on the underlined word and select the recommended change or ignore the suggestion. And, if you forget to check, you’ll see a friendly reminder asking if you’re sure you want to submit your text like it is. You can access the After the Deadline settings in Firefox from the menu bar.  Click Tools, then select AtD Preferences.  In Firefox, the settings are in a options dialog with three tabs, but it includes the same options as the Chrome settings page.  Here you can make After the Deadline as correction-happy as you like.   Conclusion The web has increasingly become an interactive place, and seldom does a day go by that we aren’t entering text in forms and comments that may stay online forever.  Even our insignificant tweets are being archived in the Library of Congress.  After the Deadline can help you make sure that your permanent internet record is as grammatically correct as possible.  Even though it doesn’t catch every problem, and even misses some spelling mistakes, it’s still a great help. Links Download the After the Deadline extension for Google Chrome Download the After the Deadline add-on for Firefox Similar Articles Productive Geek Tips Quick Tip: Disable Favicons in FirefoxStupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxHow to Disable the New Geolocation Feature in Google ChromeStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

  Read the article

• Center Pictures and Other Objects in Office 2007 & 2010

  - by Matthew Guay

  Sometimes it can be difficult to center a picture in a document just by dragging it dragging it around. Today we show you how to center pictures, images, and other objects perfectly in Word and PowerPoint. Note: For this tutorial we’re using Office 2010, but the steps are nearly identical in 2007. Centering a Picture in Word First let’s insert a picture into our document.  Click the Insert tab, and then click Picture. Once you select the picture you want, it will be added to your document.  Usually, pictures are added wherever your curser was in the document, so in a blank document it will be added at the top left. Also notice Picture Tools show up in the Ribbon after inserting an image. Note: The following menu items are available in Picture Tools Format tab which is displayed when you select the object or image you’re working with. How do we align the picture just like we want?  Click Position to get some quick placement options, including centered in the middle of the document or on the top.    However, for more advanced placement, we can use the Align tool.  If Word isn’t maximized, you may only see the icon without the “Align” label. Notice the tools were grayed out in the menu by default.  To be able to change the Alignment, we need to first change the text wrap settings. Click the Wrap Text button, and any option other than “In Line with Text”.  Your choice will depend on the document you’re writing, just choose the option that works best in the document.   Now, select the Align tools again.  You can now position your image precisely with these options. Align Center will position your picture in the center of the page widthwise. Align Middle will put the picture in the middle of the page height-wise. This works the same with textboxes.  Simply click the Align button in the Format tab, and you can center it in the page. And if you’d like to align several objects together, simply select them all, click Group, and then select Group from the menu.   Now, in the align tools, you can center the whole group on your page for a heading, or whatever you want to use the pictures for. These steps also work the same with Office 2007. Center objects in PowerPoint This works similar in PowerPoint, except that pictures are automatically set for square wrapping automatically, so you don’t have to change anything.  Simply insert the picture or other object of your choice, click Align, and choose the option you want. Additionally, if one object is already aligned like you want, drag another object near it and you will see a Smart Guide to help you align or center the second object with the first.  This only works with shapes in PowerPoint 2010 beta, but will work with pictures, textboxes, and media in the final release this summer. Conclusion These are good methods for centering images and objects in Word and PowerPoint.  From designing perfect headers to emphasizing your message in a PowerPoint presentation, this is something we’ve found useful and hope you will too. Since we’re talking about Office here, it’s worth mentioning that Microsoft has announced the Technology Guarantee Program for Office 2010. Essentially what this means is, if you purchase a version of Office 2007 between March 5th and September 30th of this year, when Office 2010 is released you’ll be able to upgrade to it for free! Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteAdd More Functions To Office 2007 By Installing Add-InsCustomize Your Welcome Picture Choices in Windows VistaEasily Rotate Pictures In Word 2007Add Effects To Your Pictures in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Superpower Your Touchpad Computer with Scrybe

  - by Matthew Guay

  Are you looking for a way to help your Touchpad computer make you more productive?  Here’s a quick look at Scrybe, a new application from Synaptics that lets you superpower it. Touchpad devices have become increasingly more interesting as they’ve included support for multi-touch gestures.  Scrybe takes it to the next level and lets you use your touchpad as an application launcher.  You can launch any application, website, or complete many common commands on your computer with a simple gesture.  Scrybe works with most modern Synaptics touchpads, which are standard on most laptops and netbooks.  It is optimized for newer multi-touch touchpads, but can also work with standard single-touch touchpads.  It works on Windows 7, Vista, and XP, so chances are it will work with your laptop or netbook. Get Started With Scrybe Head over to the Scrybe website and download the latest version (link below).  You are asked to enter your email address, name, and information about your computer…but you actually only have to enter your email address.  Click Download when finished. Run the installer when it’s download.  It will automatically download the latest Synaptics driver for your touchpad and any other components needed for Scrybe.  Note that the Scrybe installer will ask to install the Yahoo! toolbar, so uncheck this to avoid adding this worthless browser toolbar. Using Scrybe To open an application or website with a gesture, press 3 fingers on your touchpad at once, or if your touchpad doesn’t support multi-touch gestures, then press Ctrl+Alt and press 1 finger on your touchpad.  This will open the Scrype input pane; start drawing a gesture, and you’ll see it on the grey square.  The input pane shows some default gestures you can try. Here we drew an “M”, which opens our default Music player.  As soon as you finish the gesture and lift up your finger, Scrybe will open the application or website you selected. A notification balloon will let you know what gesture was preformed. When you’re entering your gesture, the input pane will show white “ink”.  The “ink” will turn blue if the command is recognized, but will turn red if it isn’t.  If Scrybe doesn’t recognize your command, press 3 fingers and try again. Scrybe Control Panel You can open the Scrybe Control panel to enter or change commands by entering a box-like gesture, or right-clicking the Scrybe icon in your system tray and selecting “Scrybe Control Panel”. Scrybe has many pre-configured gestures that you can preview and even practice. All of the gestures in the Popular tab are preset and cannot be changed.  However, the ones in the favorites tab can be edited.  Select the gesture you wish to edit, and click the gear icon to change it.  Here we changed the email gesture to open Hotmail instead of the default Yahoo Mail. Scrybe can also help you perform many common Windows commands such as Copy and Undo.  Select the Tools tab to see all of these commands.   Scrybe has many settings you may wish to change.  Select the Preferences button in the Control Panel to change these.  Here’s some of the settings we changed. Uncheck “Display a message” to turn off the tooltip notifications when you enter a gesture Uncheck “Show symbol hints” to turn off the sidebar on the input pane Select the search engine you want to open with the Search Gesture.  The default is Yahoo, but you can choose your favorite. Adding a new Scrybe Gesture The default Scrybe options are useful, but the best part is that you can assign gestures to your own programs or websites.  Open the Scrybe control panel, and click the plus sign on the bottom left corner.  Enter a name for your gesture, and then choose if it is for a website or an application. If you want the gesture to open a website, enter the address in the box. Alternately, if you want your gesture to open an application, select Launch Application and then either enter the path to the application, or click the button beside the Launch field and browse to it. Now click the down arrow on the blue box and choose one of the gestures for your application or website. Your new gesture will show up under the Favorites tab in the Scrybe control panel, and you can use it whenever you want from Scrybe, or practice the gesture by selecting the Practice button. Conclusion If you enjoy multi-touch gestures, you may find Scrybe very useful on your laptop or netbook.  Scrybe recognizes gestures fairly easily, even if you don’t enter them perfectly correctly.  Just like pinch-to-zoom and two-finger scroll, Scrybe can quickly become something you miss on other laptops. Download Scrybe (registration required) Similar Articles Productive Geek Tips Fixing Firefox Scrolling Problems with Dell Synaptics TouchpadRemove Synaptics Touchpad Icon from System TrayRoll Back Troublesome Device Drivers in Windows VistaChange Your Computer Name in Windows 7 or VistaLet Somebody Use Your Computer Without Logging Off in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

  Read the article

• GlassFish Clustering with DCOM on Windows

  - by ByronNevins

  DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering.  It is very difficult for users to get SSH configured properly on Windows.  SSH does not come with Windows so we have to depend on third party tools.  And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms.  It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes.  This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers.   Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM.  validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0).  And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc.  Later versions of Windows err on the side of tightening security be default.  This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user.  setup-local-dcom will assist you in making required changes to the Windows Registry.  See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command.  It should be run before any other commands.  If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine.  If  validate-dcom runs successfully you can be confident that all the DCOM commands will work.  Conversely, the opposite is also true:  If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc.   All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command.  This means that you can track these commands easily on the remote machine with the usual tools.  E.g. using AS_LOGFILE, looking at log files, etc.  It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder.  Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234  Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234.  It will be running start-local-instance and patiently waiting for you to attach.

  Read the article

• Backup Your Windows Home Server Off-Site with Asus Webstorage

  - by Mysticgeek

  Windows Home Server lets you backup machines on your network easily. But what about backing up the server data? Today we take a look at ASUS WebStorage for Windows Home Server, which provides you with secure off-site backup for WHS. To use the ASUS WebStorage service you’ll need to sign up for a free account. It offers 1GB of free storage, then you can purchase an unlimited backup package for $39.99 for a year subscription. Note: They also offer online storage for individual PCs as well. Install ASUS WebStorage for WHS Browse to your shared folders on the server and open the Add-Ins folder and copy over the WHSConnectorSetup2.2.4.088.msi file (link below) then close out of the folder. Now launch Windows Home Server Console from one of the computers on your network, click Settings, then Add-ins. Under Available Add-ins click the Available tab and you’ll see the Asus WebStorage installer file we just copied over. Click the Install button. Installation kicks off and when it’s complete, you’ll need to close out of the console and reconnect. Using ASUS WebStorage WHS Connector  When you reconnect to WHS Console, scroll over to the ASUS WebStorage icon and click on Settings. Now log into your ASUS account… Now select the folders you want to backup to the WebStorage service. Select the radio button next to Enable to initialize the backup process… The backup process begins. You can change which folders are backed up simply by disabling the backup process, uncheck the folder(s), then enable the backup again. ASUS WebStorage Site After you have files backed up to the ASUS site, log into your account, and your presented with an overview of the amount of storage you’re using. It also shows what type of files are taking certain amounts of space.   You can browse through your backed up files and folders. It allows you to share and sync backed up data as well. Navigate to the file you want and you can easily download it by clicking on it, or share it out by clicking the share link below it. If you choose to share it, you’re provided with a link to the file to send out to other users.   Conclusion Users of Windows Home Server have been looking for an inexpensive cloud backup solution for quite some time. There are services such as JungleDisk, KeepVault, Wuala…etc. These services probably do a better job, but can start getting expensive once you start uploading a GBs of data. Another disappointment of ASUS WebStorage is you can only backup your WHS shares (from what we’ve been able to determine), it’s an “all or nothing” type of thing. You cannot go in and select individual files and folders. The initial upload speeds can be a bit slow as well, although that might have something to do with limited upload speeds on the DSL connection we used to test it. Retrieving your data from the ASUS site is a breeze though, and all the data files are organized quite well. The WHS Addin is very easy to install and use. If you’re looking for an off-site solution to backup your WHS data, you can test out ASUS WebStorage for free with a 1GB limit. This is good for testing the service and it might be exactly what you’re looking for. Other users may want a more advanced solution like KeepVault or CloudBerry…which is a front end for Amazon S3 storage. Download ASUS WebStorage WHS Addin Other WHS Offsite Backup Solutions CloudBerry, JungleDisk, KeepVault, Wuala Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscRemove a Network Computer from Windows Home ServerShare Ubuntu Home Directories using Samba TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• Rip and Convert DVD’s to an ISO Image

  - by Mysticgeek

  If you own a lot of DVD’s, you might want to convert them to an ISO image for backup and easily playing them on your media center. Today we take a look at ripping your discs using DVDFab, then using ImgBurn to create an ISO image of the ripped DVD files. Rip DVD with DVDFab6 DVDFab will remove copy protection and rip the DVD files for free. Other components in the suite require you to purchase a license after the 30 day trial, but you’ll still be able to rip DVD’s after the trial. Install DVDFab by accepting the defaults (link below)…a system restart is required to complete the install process. The first time you run it, a welcome screen is displayed. If you don’t want to see it again check the box Do not show again, then Start DVDFab.  Pop the DVD in your drive and click Next. Now select your region and check Do not show again, then OK. It will then open the DVD and begin to scan it. Under DVD to DVD you can select either Full Disc or Main Movie depending on what you want to rip. If you want to burn the DVD to a disc after it’s created select the Full Disc option. Now click the Start button to begin the ripping process. After the ripping process has completed, you’ll get a message telling you it’s waiting for you to put in a blank DVD. Since we aren’t burning the disc, just cancel the message. Click Finish and close out of DVDFab or just minimize it if you’re going to keep using it to rip another DVD. By default the temporary directory is in My Documents \ DVDFab \ Temp…however you can change it in settings. If you go to the Temp directory you’ll see the DVD files listed there… Convert Files to ISO with ImgBurn Now that we have the files ripped from the DVD, we need to convert them to an ISO image using ImgBurn (link below). Open it up and from the main menu click on Create image file from files/folders. Click on the folder icon to browse to the location of the ripped DVD files. Browse to the DVDFab temp directory and the VIDEO_TS folder for the source and click Ok. Then choose a destination directory, give the ISO a name, and click Save. In this case we ripped the Unbreakable DVD, so named it that.   So now in ImgBurn you have the source being the ripped DVD files, and the destination for the ISO…then click the Build button. If you don’t create a volume label, ImgBurn is kind enough to create on for you. If everything looks correct, click Ok. Now wait while ImgBurn goes through the process of converting the ripped DVD files to an ISO image. The process has successfully completed. The ISO image of the DVD will be in the output directory you selected earlier. Now you can burn the ISO image to a blank DVD or store it on an external hard drive for safe keeping. When you’re done, you’ll probably want to go into the temp DVDFab folder and delete the VOB and other files in the Video_TS folder as they will take up a lot of space on your hard drive.   Conclusion Although this method requires two programs to make an ISO out of a DVD, it’s extremely quick. When burning DVD’s of various lengths, it took less than 30 minutes to get the final ISO. Now, you’ll have your DVD movies backed up in case something were to happen to the discs and are no longer playable. If you use Windows Media Center to watch your movies, check out our article on how to automatically mount and view ISO files in Windows 7 Media Center. With DVDFab, you get a 30 day fully functional trial for all of its features. You’ll still be able rip DVD’s even after the 30 day trial has ended. The more we’ve been using DVDFab, the more impressed we are with its capabilities, so after the 30 day trial you should consider purchasing a license. We will have a full review of the of it to share with you soon.  Download DVDFab Download ImgBurn Similar Articles Productive Geek Tips How To Rip DVDs with VLCCalculate with Qalculate on LinuxConvert a Row to a Column in Excel the Easy WayEnjoy Quick & Easy Unit Conversion with Convert for WindowsConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser

  Read the article

• Override an IOCTL Handler in PQOAL

  - by Kate Moss' Big Fan

  When porting or creating a BSP to a new platform, we often need to make change to OEMIoControl or HAL IOCTL handler for more specific. Since Microsoft introduced PQOAL in CE 5.0 and more and more BSP today leverages PQOAL to simplify the OAL, we no longer define the OEMIoControl directly. It is somehow analogous to migrate from pure Windows SDK to MFC; people starts to define those MFC handlers and forgot the WinMain and the big message loop. If you ever take a look at the interface between OAL and Kernel, PUBLIC\COMMON\OAK\INC\oemglobal.h, the pfnOEMIoctl is still there just as the entry point of Windows Program is WinMain since day one. (For those may argue about pfnOEMIoctl is not OEMIoControl, I will encourage you to dig into PRIVATE\WINCEOS\COREOS\NK\OEMMAIN\oemglobal.c which initialized pfnOEMIoctl to OEMIoControl. The interface is just to split OAL and Kernel which no longer linked to one executable file in CE 6, all of the function signature is still identical) So let's trace into PQOAL to realize how it implements OEMIoControl and how can we override an IOCTL handler we interest. First thing to know is the entry point (just as finding the WinMain in MFC), OEMIoControl is defined in PLATFORM\COMMON\SRC\COMMON\IOCTL\ioctl.c. Basically, it does nothing special but scan a pre-defined IOCTL table, g_oalIoCtlTable, and then execute the handler. (The highlight part) Other than that is just for error handling and the use of critical section to serialize the function. BOOL OEMIoControl(     DWORD code, VOID *pInBuffer, DWORD inSize, VOID *pOutBuffer, DWORD outSize,     DWORD *pOutSize ) {     BOOL rc = FALSE;     UINT32 i; ...     // Search the IOCTL table for the requested code.     for (i = 0; g_oalIoCtlTable[i].pfnHandler != NULL; i++) {         if (g_oalIoCtlTable[i].code == code) break;     }     // Indicate unsupported code     if (g_oalIoCtlTable[i].pfnHandler == NULL) {         NKSetLastError(ERROR_NOT_SUPPORTED);         OALMSG(OAL_IOCTL, (             L"OEMIoControl: Unsupported Code 0x%x - device 0x%04x func %d\r\n",             code, code >> 16, (code >> 2)&0x0FFF         ));         goto cleanUp;     }            // Take critical section if required (after postinit & no flag)     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Take critical section                    EnterCriticalSection(&g_ioctlState.cs);     }     // Execute the handler     rc = g_oalIoCtlTable[i].pfnHandler(         code, pInBuffer, inSize, pOutBuffer, outSize, pOutSize     );     // Release critical section if it was taken above     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Release critical section                    LeaveCriticalSection(&g_ioctlState.cs);     } cleanUp:     OALMSG(OAL_IOCTL&&OAL_FUNC, (L"-OEMIoControl(rc = %d)\r\n", rc ));     return rc; }   Where is the g_oalIoCtlTable? It is defined in your BSP. Let's use DeviceEmulator BSP as an example. The PLATFORM\DEVICEEMULATOR\SRC\OAL\OALLIB\ioctl.c defines the table as const OAL_IOCTL_HANDLER g_oalIoCtlTable[] = { #include "ioctl_tab.h" }; And that leads to PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h which defined some of IOCTL handler but others are defined in oal_ioctl_tab.h which is under PLATFORM\COMMON\SRC\INC\. Finally, we got the full table body! (Just like tracing MFC, always jumping back and forth). The format of table is very straight forward, IOCTL code, Flags and Handler Function // IOCTL CODE,                          Flags   Handler Function //------------------------------------------------------------------------------ { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlHalInitRegistry     }, { IOCTL_HAL_INIT_RTC,                       0,  OALIoCtlHalInitRTC          }, { IOCTL_HAL_REBOOT,                         0,  OALIoCtlHalReboot           }, The PQOAL scans through the table until it find a matched IOCTL code, then invokes the handler function. Since it scans the table from the top which means if we define TWO handler with same IOCTL code, the first one is always invoked with no exception. Now back to the PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h, with the following table { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlDeviceEmulatorHalInitRegistry     }, ... #include <oal_ioctl_tab.h> Note the IOCTL_HAL_INITREGISTRY handler are defined in both BSP's local ioctl_tab.h and the common oal_ioctl_tab.h, but due to BSP's local handler comes before "#include <oal_ioctl_tab.h>" so we know the OALIoCtlDeviceEmulatorHalInitRegistry always get called. In this example, the DeviceEmulator BSP overrides the IOCTL_HAL_INITREGISTRY handler from OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry by manipulating the g_oalIoCtlTable table. (In some point of view, it is similar to message map in MFC) Please be aware, when you override an IOCTL handler in PQOAL, you may want to clone the original implementation to your BSP and change to meet your need. It is recommended and save you the redundant works but remember to rename the handler function (Just like the DeviceEmulator it changes the name of OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry). If you don't change the name, linker may not be happy (due to name conflict) and the more important is by using different handler name, you could always redirect the handler back to original one. (It is like the concept of OOP that calling a function in base class; still not so clear? I am goinf to show you soon!) The OALIoCtlDeviceEmulatorHalInitRegistry setups DeviceEmulator specific registry settings and in the end, if everything goes well, it calls the OALIoCtlHalInitRegistry (PLATFORM\COMMON\SRC\COMMON\IOCTL\reginit.c) to do the rest.     if(fOk) {         fOk = OALIoCtlHalInitRegistry(code, pInpBuffer, inpSize, pOutBuffer,             outSize, pOutSize);     } Now you got the picture, whenever you want to override an IOCTL hadnler that is implemented in PQOAL just Clone the handler function to your BSP as a template. Simple name change for the handler function, and a name change in the IOCTL table header file that maps the IOCTL with the function Implement your IOCTL handler and whenever you need to redirect it back just calling the original handler function. It is the standard way of implementing a custom IOCTL and most Microsoft developers prefer. The mapping of IOCTL routine to IOCTL code is platform specific - you control the header file that does that mapping.

  Read the article

• Clone a VirtualBox Machine

  I just installed VirtualBox, which I want to try out based on recommendations from peers for running a server from within my Windows 7 x64 OS.  Ive never used VirtualBox, so Im certainly no expert at it, but I did want to share my experience with it thus far.  Specifically, my intention is to create a couple of virtual machines.  One I intend to use as a build server, for which a virtual machine makes sense because I can easily move it around as needed if there are hardware issues (its worth noting my need for setting up a build server at the moment is a result of a disk failure on the old build server).  The other VM I want to set up will act as a proxy server for the issue tracking system were using at Code Project, Axosoft OnTime.  They have a Remote Server application for this purpose, and since the OnTime install is 300 miles away from my location, the Remote Server should speed up my use of the OnTime client by limiting the chattiness with the database (at least, thats the hope). So, I need two VMs, and Im lazy.  I dont want to have to install the OS and such twice.  No problem, it should be simple to clone a virtualbox machine, or clone a virtualbox hard drive, right?  Well unfortunately, if you look at the UI for VirtualBox, theres no such command.  Youre left wondering How do I clone a VirtualBox machine? or the slightly related How do I clone a VirtualBox hard drive? If youve used VirtualPC, then you know that its actually pretty easy to copy and move around those VMs.  Not quite so easy with VirtualBox.  Finding the files is easy, theyre located in your user folder within the .VirtualBox folder (possibly within a HardDisks folder).  The disks have a .vdi extension and will be pretty large if youve installed anything.  The one shown here has just Windows Server 2008 R2 installed on it nothing else. If you copy the .vdi file and rename it, you can use the Virtual Media Manager to view it and you can create a new machine and choose the new drive to attach to.  Unfortunately, if you simply make a copy of the drive, this wont work and youll get an error that says something to the effect of: Cannot register the hard disk PATH with UUID {id goes here} because a hard disk PATH2 with UUID {same id goes here} already exists in the media registry (PATH to XML file). There are command line tools you can use to do this in a way that avoids this error.  Specifically, the c:\Program File\Sun\VirtualBox\VBoxManage.exe program is used for all command line access to VirtualBox, and to copy a virtual disk (.vdi file) you would call something like this: VBoxManage clonehd Disk1.vdi Disk1_Copy.vdi However, in my case this didnt work.  I got basically the same error I showed above, along with some debug information for line 628 of VBoxManageDisk.cpp.  As my main task was not to debug the C++ code used to write VirtualBox, I continued looking for a simple way to clone a virtual drive.  I found it in this blog post. The Secret setvdiuuid Command VBoxManage has a whole bunch of commands you can use with it just pass it /? to see the list.  However, it also has a special command called internalcommands that opens up access to even more commands.  The one thats interesting for us here is the setvdiuuid command.  By calling this command and passing in the file path to your vdi file, it will reset the UUID to a new (random, apparently) UUID.  This then allows the virtual media manager to cope with the file, and lets you set up new machines that reference the newly UUIDd virtual drive.  The full command line would be: VBoxManage internalcommands setvdiuuid MyCopy.vdi The following screenshot shows the error when trying clonehd as well as the successful use of setvdiuuid. Summary Now that I can clone machines easily, its a simple matter to set up base builds of any OS I might need, and then fork from there as needed.  Hopefully the GUI for VirtualBox will be improved to include better support for copying machines/disks, as this is Im sure a very common scenario. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Adventures in Windows 8: Solving activation errors

  - by Laurent Bugnion

  Note: I tagged this article with “MVVM” because I got a few support requests for MVVM Light regarding this exact issue. In fact it is a Windows 8 issue and has nothing to do with MVVM Light per se… Sometimes when you work on a Windows 8 app, you will get a very annoying issue when starting the app. In that case, the app doesn’t not even start past the Splash screen. Putting a breakpoint in App.xaml.cs doesn’t help because the app doesn’t even reach that point! So what exactly is happening? Well when a Windows 8 app starts, the system is performing a few check first. One of the checks, for instance, is to see if an app with the same package ID is already available. The package ID is a unique value set in the package manifest. In the Solution Explorer, double click on Package.appxmanifest. This opens the manifest in a special editor Click on the Packaging tab See the GUID under Package Name. This is the unique ID I am talking about. If there is a conflict (i.e. if an app is already installed with the exact same ID), Windows will warm the user that the app is already installed. However when you are in the process of developing an app, you install and uninstall the same app many many times (every time that you start in Visual Studio), and sometimes some issues arise, for instance failing to uninstall the app before starting the new instance of the same app. First step if you get such an error When the application fails to start past the splash screen, the first step is to identify what kind of error happened. In my experience the “already installed” is by far the most frequent (in fact I never had another such error), but it can be something else. An annoying thing is that the popup that shows the error is usually started below the Windows 8 app, and so you don’t even see it! This is especially true if you run this in the Simulator. In that case, do the following: Press on the Simulator’s home button, then press on the Desktop tile on the Start menu. The error popup should be shown on the desktop. If your applications runs on the Local machine, you also do the same and press the Windows button, and then from the Start menu press the Desktop tile. Deployment error in Studio Sometimes the same error causes Visual Studio to fail launching the application at all with a deployment error. This is a better case, because at least it is clear that there is an issue. In that case, write down the code that is shown in the Error window (for instance 0x80073D05 in the example below). Once you have the error code, go to the “Troubleshooting packaging, deployment, and query of Windows Store apps” page and look up the code in question. In my case, the error was “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED”, “An error occurred while deleting the package's previously existing application data.” Solving the “ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED” issue Update: Before trying the below, you can also try the simple steps: Exit Visual Studio Go to the Start menu Locate your app’s tile. It should be visible in the Start menu directly, towards the far end on the right. Right click the tile and select Uninstall from the App Bar. Restart Visual Studio and try again. Sometimes it helps. If it doesn’t, then try the following: In order to solve the case where Windows, for any reason, fails to delete the existing application before starting the new instance, follow the steps: Open the Package.appxmanifest in Visual Studio Open the Packaging tab. Change the Package name. For tests you can just try to change the last character of the GUID, though I would recommend creating a brand new GUID. Press Start Type GUID Start the GUID Generator application Select Registry Format Press Copy. Paste the new GUID in place of the Package Name in Visual Studio Important: don’t forget to remove the curly brackets at the beginning and at the end of the newly pasted GUID. Then you just have to cross your fingers and start the application again… If it works, celebrate. if it doesn’t work… well at this point I am not sure so good luck with that ;) Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Windows 8 for productivity?

  - by Charles Young

  At long last I’ve started using Windows 8.  I boot from a VHD on which I have installed Office, Visio, Visual Studio, SQL Server, etc.  For a week, now, I’ve been happily writing code and documents and using Visio and PowerPoint.  I am, very much, a ‘productivity’ user rather than a content consumer.   I spend my days flitting between countless windows and browser tabs displayed across dual monitors.  I need to access a lot of different functionality and information in as fluid a fashion as possible. With that in mind, and like so many others, I was worried about Windows 8.  The Metro interface is primarily about content consumption on touch-enabled screens, and not really geared for people like me sitting in front of an 8-core non-touch laptop and an additional Samsung monitor.  I still use a mouse, not my finger.  And I create more than I consume. Clearly, Windows 8 won’t be viable for people like me unless Metro keeps out of my hair when using productivity and development tools.  With this in mind, I had long expected Microsoft to provide some mechanism for switching Metro off.  There was a registry hack in last year’s Developer Preview, but this capability has been removed.   That’s brave.  So, how have things worked out so far? Well, I am really quite surprised.  When I played with the Developer Preview last year, it was clear that Metro was unfinished and didn’t play well enough with the desktop.  Obviously I expected things to improve, but the context switching from desktop to full-screen seemed a heavy burden to place on users.  That sense of abrupt change hasn’t entirely gone away (how could it), but after a few days, I can’t say that I find it burdensome or irritating.   I’ve got used very quickly to ‘gesturing’ with my mouse at the bottom or top right corners of the screen to move between applications, using the Windows key to toggle the Start screen and generally finding my way around.   I am surprised at how effective the Start screen is, given the rather basic grouping features it provides.  Of course, I had to take control of it and sort things the way I want.  If anything, though, the Start screen provides a better navigation and application launcher tool than the old Start menu. What I didn’t expect was the way that Metro enhances the productivity story.  As I write this, I’ve got my desktop open with a maximised Word window.  However, the desktop extends only across about 85% of the width of my screen.  On the left hand side, I have a column that displays the new Metro email client.  This is currently showing me a list of emails for my main work account.  I can flip easily between different accounts and read my email within that same column.  As I work on documents, I want to be able to monitor my inbox with a quick glance. The desktop, of course, has its own snap feature.  I could run the desktop full screen and bring up Outlook and Word side by side.  However, this doesn’t begin to approach the convenience of snapping the Metro email client.  Consider that when I snap a window on the desktop, it initially takes up 50% of the screen.  Outlook doesn’t really know anything about snap, and doesn’t adjust to make effective use of the limited screen estate.  Even at 50% screen width, it is difficult to use, so forget about trying to use it in a Metro fashion. In any case, I am left with the prospect of having to manually adjust everything to view my email effectively alongside Word.  Worse, there is nothing stopping another window from overlapping and obscuring my email.  It becomes a struggle to keep sight of email as it arrives.  Of course, there is always ‘toast’ to notify me when things arrive, but if Outlook is obscured, this just feels intrusive. The beauty of the Metro snap feature is that my email reader now exists outside of my desktop.   The Metro app has been crafted to work well in the fixed width column as well as in full-screen.  It cannot be obscured by overlapping windows.  I still get notifications if I wish.  More importantly, it is clear that careful attention has been given to how things work when moving between applications when ‘snapped’.  If I decide, say to flick over to the Metro newsreader to catch up with current affairs, my desktop, rather than my email client, obligingly makes way for the reader.  With a simple gesture and click, or alternatively by pressing Windows-Tab, my desktop reappears. Another pleasant surprise is the way Windows 8 handles dual monitors.  It’s not just the fact that both screens now display the desktop task bar.  It’s that I can so easily move between Metro and the desktop on either screen.  I can only have Metro on one screen at a time which makes entire sense given the ‘full-screen’ nature of Metro apps.  Using dual monitors feels smoother and easier than previous versions of Windows. Overall then, I’m enjoying the Windows 8 improvements.  Strangely, for all the hype (“Windows reimagined”, etc.), my perception as a ‘productivity’ user is more one of evolution than revolution.  It all feels very familiar, but just better.

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >