Search Results

Search found 8782 results on 352 pages for 'restart processes'.

Page 101/352 | < Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >

• realtek lan driver problem - win 7

  - by tango _123

  Hi, my new notebook (ACER TM 8371) with Win 7(x32) professional as OS, has strage behaviour with respect to LAN. when I plug or unplug my charger cable, or my notebook goes in stad-by, or just a do nothing, the netwrok connection is lost. All the energy savings functionbality have been in-activated. if i check the network adapter information, it says "a network cabel is unplugged or corrupted", but it is not true.....the cable is in and it is not corrupted (i tried several which works on other machines). if a tried to di-habilitate and hence re-habilitate, it allows di-habilitation and not to further re-habilitate (it says "no driver for the network card" are available). in some cases, also, the driver disappears (i cannot see it anylonger). if i restart the notebook, everything comes back to normality, but.....today in 3 hours i had to restart 6 times!!! can anyone help me? win 7 says the driver is the last one, so no need to update it. here are some techinical information aboiut network card and driver: Name [00000015] Realtek PCIe GBE Family Controller Adapter type Ethernet 802.3 Product type Realtek PCIe GBE Family Controller Installated YES ID device PNP PCI\VEN_10EC&DEV_8168&SUBSYS_02831025&REV_02\4&266E4C4F&0&00E2 last reset 20/11/2009 11:27 Index 15 Service name RTL8167 I/O Port 0x0000FF00-0x0000FFFF Memory address 0xE2500000-0xE2500FFF Memory address 0xE1400000-0xE140FFFF IRQ Channel IRQ 18 Driver c:\windows\system32\drivers\rt86win7.sys (7.3.522.2009, 164,00 KB (167.936 Byte), 28/08/2009 22:12)

  Read the article

• Unable to ssh to a Linux VM after a day

  - by jogabonito

  I have a machine running 4 VMs on it. There is one Fedora VM which is causing me some trouble. The IPs of the VMs are something like 10.100.100.* I have a Windows PC which is in the same network. It has an IP 10.100.25.77. When I reboot the Fedora VM, I am able to ping it from my Windows PC as well as use putty to ssh to it. The next day, I cant ping it or ssh from my Windows PC. However I can ping and ssh to the other VMs on the machine. If I ssh to one of the other VMs, I can ping and ssh to the Fedora VM. Next if I restart it, things get back to normal and I can access it without any issues. The IP of the VM doesn't change after rebooting and it is statically assigned I would like to know what is causing this and how to get it fixed. As a last resort, I am thinking of running a cron job to restart the VM every night, it is not a critical server, but will be generally used occasionally in the day time.

  Read the article

• Linux: CIFS/Samba mount hangs for several minutes

  - by Pistos

  I have a small local network which has a Gentoo box and a Windows box. I mount a share originating on the Windows box onto the Gentoo box with a command like: mount -t cifs -o username=WindowsUsername,password=thepassword,uid=pistos //192.168.0.103/Users /mnt/windowsbox Most of the time, everything Just Works, and I can read and write without problems. However, every few weeks or so, the connection or the mount point seems to go dead or hang, such that any process that tries to access the mount point gets stuck in D state (disk, or I/O wait). These processes become impervious to TERM and KILL signals. Disconnecting and reconnecting the Windows box from the network does not help. The frozen state lasts for 5+ minutes. It's really frustrating and gets in the way of normal work, because it freezes Save As dialogues, ls commands, etc. If I issue a umount on the mount point, it either hangs also, or reports that the mount point is in use. Eventually, the dead state resolves itself, and the mount point gets unmounted, or it becomes possible to umount with no delay. My guess is that this happens when the connection/mount has gone idle, or when the Windows machine has been idle. I am not really sure. Why is this happening, and what can I do to prevent it? Or how can I successfully kill these D-state processes at will? Possibly related: CIFS mounts hang on read

  Read the article

• Need help toubleshooting PC

  - by brux

  I have had problems since my dog pee'd on my computer. Problem: loads windows fine, at random intervals from 5 minutes to 30 minutes it restarts itself. There is nothing in the event log such as errors, no BSOD, just cold restart. after restarting - sometimes- it POST's and restarts itself at the end of POST. It will do this many times and then finally load windows. The cycle then begins again, it will restart eventually. What I have done: I thought it was HDD at first, since this is the only part of the computer which actually got wet with any fluid ( the case is off the PC and the dog pee'd down the front where the HDD is located). Seatool, the seagate HDD tool, found errors when I ran it inside windows, so I ran it in DOS mode from boo-table USB and ran it. It found the same number of errors and fixed them all. I ran the scan again and it says "Good". I loaded windows and ran the scan and it also said "Good there. So the HDD appears to be fine but the problem persists, random restarts. What else could this be? I have taken the computer apart and cleaned everything and also taken the PSU apart and cleaned it thoroughly. The problem still persists, what should my next steps be?

  Read the article

• Enable bitlocker an save key to share

  - by user273694

  I have searched all over the web but cannot find a complete answer to this: How to enable Bitlocker on a laptop with TPM, and store a file with the Bitlocker recovery key and TPM password by USING THE manage-bde command line tool. The file should be the same as when created in the Bitlocker manager UI. I DO NOT want to save to AD. The same question was asked here but was not answered correctly. The goal is to write a script to be used with an endpoint manager. I have tried the following: manage-bde -on C: Works fine, but does not create or save a key. manage-bde -on C: -rk C:\myfolder\ and manage-bde -on C: -RecoveryKey C:\myfolder\ -rp The output from the last two methods state that a key has been saved to c:\myfolder and so on, but that is not the case. It also says that I have to: Save the password in a secure location Insert a USB flash drive with an external key file into the computer. Restart and run hardware test type "manage-bde -status" to check if the hardware test succeeded After a restart, I get an error saying that Bitlocker could not be enabled because the bitlocker startup key or recovery kpassword cannot be found on the USB device.... C: was not encrypted. Why am I asked to insert a USB?? I simply want to encrypt the hard drive and save the recovery information to a file automatically. Is that too much to ask? Help please!

  Read the article

• Locked out of our Comcast Business Gateway for seemingly no reason

  - by Tyler

  A little backstory... Last fall we migrated our ISP from AT&T to Comcast at one of our offices. At that time, we received a new modem/router from Comcast and we configured everything to our liking. We've never really had very many issues with the router aside from having to restart it every once in a while. Here's the problem... About three months ago I changed the password on the router from the default. After that, I logged into the router several times to make changes with no issue. During May I logged into the router to add two new static routes, no problems. A week ago, I tried to log into the router and could not. I tried the non-default password that I changed it to, the default, anything and everything I could think of and no luck. I restarted the router on Monday thinking it may just be locked up, but after the restart it would still not let me log in. This router is at our other office about 2 hours from here and I want to avoid having to drive down there and reset to factory defaults, reconfigure, etc. Any ideas?

  Read the article

• DRBD as a block device for XEN VM (Centos 5.3)

  - by SaberTooth

  Hi all, I have setup a drbd resource between 2 server nodes - everything works correctly when doing sync tests between the two. (I want to create a HA cluster using drbd,xen and heartbeat) However, when I try and create a XEN VM with Centos as guest operating system, I get through to the partitioning screen on the install but when I select a partitioning type the next screen gives me the following error : "An error has occurred - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem." This is the first time attempting create a setup like this and searching Google does not help much... my config files for DRBD and XEN.... DRBD (just the section that is pertinent) on xennode0 { device /dev/drbd0; disk /dev/sda5; address X.X.X.X:7788; flexible-meta-disk internal; } on xennode1 { device /dev/drbd0; disk /dev/sda5; address X.X.X.X:7788; meta-disk internal; } XEN kernel = "/boot/xeninstall/vmlinuz" ramdisk = "/boot/xeninstall/initrd.img" extra = "text" name = "VM" maxmem = 3000 memory = 3000 vcpus = 4 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ ] disk = [ "phy:/dev/drbd0,sda1,w", "tap:aio:/srv/xen/xenswap.img,sda2,w" ] vif = [ "mac=00:16:3e:11:67:ae,bridge=xenbr0" ] root = "/dev/sda1 ro" Thanks in advance!

  Read the article

• How to kill ostensibly immortal process?

  - by DeeDee

  I had some huge file transfers operating on an NFS mount. The server on which the mount point resided was carelessly rebooted, and now the server from which these large transfers were initiated seems to be bogged down by them. If I run top, I see the following: The first thing I tried was to run kill with each the -1 -2 -9 and -15 flags, and each of the process ids shown above in turn. This allowed me to proceed, but didn't kill the processes. The next thing I attempted was to reboot the server, but neither reboot nor shutdown -r now worked. When I ran shutdown -r now the standard broadcast message was sent out, but the sever did not reboot. I confirmed this by looking at the server uptime, which was 25 days. So now I'm a little stuck. I'm running these commands as root. EDIT: Here's another interesting tidbit: In top, I don't see that any other processes are using more than a fraction of a percent of memory or more than 5% of CPU. EDIT 2: output of /var/log/messages

  Read the article

• unicorn and nginx, went wrong

  - by achempion

  I try to deploy my app via capistrano. It was done, but when I start to nginx and show my site in the browser I see 'We're sorry, but something went wrong.' It is bad. I use unicorn. See my configs https://gist.github.com/3904032 I try to start server via rails s -e prodiction and it's work! I think that this error may be because I can't restart server root@li272-194:~# /etc/init.d/nginx restart Restarting nginx: the configuration file /etc/nginx/nginx.conf syntax is ok configuration file /etc/nginx/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: still could not bind() nginx. any ideas? nginx log 2012/10/17 02:57:41 [error] 3271#0: *1 could not find named location "@myapp", client: 91.192.62.77, server: 178.79.153.194, request: "GET / HTTP/1.1", host: "178.79.153.194" 2012/10/17 02:19:08 [crit] 2448#0: *8 connect() to unix:/srv/zarcon/shared/unicorn.sock failed (2: No such file or directory) while connecting to upstream, client: 91.192.62.77, server: zarkon, request: "GET / HTTP/1.1", upstream: "http://unix:/srv/zarcon/shared/unicorn.sock:/", host: "178.79.153.194"

  Read the article

• Apache suddenly very slow on http and faster on https

  - by hsnm

  Background: I have Apache 2 running on ubuntu. There is a low usage on it and mostly being accessed for a web service URL from mobile apps. It was working fine until I installed SSL certificates. I now have both http and https. When I access the server using https, I get a fairly quick response (but probably not as fast as before). When I use http, it's so slow. What I tried: From this post: I curl localhost from the host and it takes some time, meaning there is no routing issue. The server runs on Amazon EC2 instance and is managed by me only. Also: I see that Apache once running, creates the maximum number of processes it is allowed to, which was not the case before. I lowered the MaxClients to 20 and I think I'm getting faster responses but it still takes over a minute and I always have MaxClients Apache processes. dmesg returns many [ 1953.655703] TCP: Possible SYN flooding on port 80. Sending cookies. When I netstat I get many entries with SYN_RECV. Possibly a DDoS attack? From EC2's monitoring diagrams I see a pattern of high "Maximum Network In (Bytes)" since 2 days ago. By the way the server is still being tested, the actual traffic is very low and not consistent. I tried to go with this solution to limit incoming connections using iptables, still no luck, but I'm trying. Question: What could be the problem? Is this a DDoS attack?

  Read the article

• /etc/hosts: What is loghost? (fresh install of Solaris 10 update 9)

  - by cjavapro

  # # Internet host table # ::1 localhost 127.0.0.1 localhost XX.XX.XX.XX myserver loghost What is the purpose of loghost? If it was not for having loghost in there, all the /etc/hosts files on all the servers in this particular network could be identical. Edit: I looked at /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) Very interesting. when shutting down,, alerts go to all users probably through *.emerg * Looking at ifdef, it seems that the first parameter checks to see if current machine is a loghost, second parameter is what to do if it is and third parameter is what to do if it is not. Edit: If you want to test a logging rule you can use svcadm restart system-log to restart the logging service and then logger -p notice "test" to send a test log message where notice can be replaced with any type such as user.err, auth.notice, etc.

  Read the article

• ssh hangs on "Last login" line

  - by Pavel H

  This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

  Read the article

• My new SSD is causing issues. How can I solve them?

  - by Allan

  Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

  Read the article

• Optimizing Apache for large file serving

  - by D_Guy13

  I have a random problem with Apache that I can't quite figure out, here is my setup, Windows Server 2008 R2, 64 Bit, 5GB RAM, SSD with 200 MB(Read/write) and Dual Core CPU @ 2.1 GHz A dump from mod-staus, Server Version: Apache/2.4.7 (Win32) mod_limitipconn/0.24 mod_antiloris/0.5.2 PHP/5.5.9 Server MPM: WinNT Apache Lounge VC11 Server Built: Nov 21 2013 20:13:01 Current Time: Thursday, 21-Aug-2014 23:38:06 W. Europe Daylight Time Restart Time: Thursday, 21-Aug-2014 20:30:47 W. Europe Daylight Time Parent Server Config. Generation: 1 Parent Server MPM Generation: 1 Server uptime: 3 hours 7 minutes 18 seconds Server load: -1.00 -1.00 -1.00 Total accesses: 283025 - Total Traffic: 1172.2 GB 25.2 requests/sec - 106.8 MB/second - 4.2 MB/request 62 requests currently being processed, 388 idle workers Serving large .zip & iso files using mod_xsendfile. (File size range 500 MB - 1.5 GB) The setup works and is running fine. CPU usage is very unstable, jumps all the time between 10% - 90% and the servers goes down when it hits 100%. In that case I have to hard restart the server. Server it outputting traffic at 30 Mbps. Is there anything else I should think about to get a more stable CPU usage? Is that CPU usage normal? Can switching to Linux help me achieve better CPU usage?

  Read the article

• Heavy write to Galera cluster - table locked, cluster practically unusable

  - by Joe

  I set up Galera Cluster on 3 nodes. It works perfectly for reading data. I have done simple application to make some test on the cluster. Unfortunately I have to say that the Cluster fails totally when I try to do some writing. Maybe it can be configured differently or I do sth wrong? I have a simple stored procedure: CREATE PROCEDURE testproc(IN p_idWorker INTEGER) BEGIN DECLARE t_id INT DEFAULT -1; DECLARE t_counter INT ; UPDATE test SET idWorker = p_idWorker WHERE counter = 0 AND idWorker IS NULL limit 1; SELECT id FROM test WHERE idWorker = p_idWorker LIMIT 1 INTO t_id; SELECT ABS(MAX(counter)/MIN(counter)) FROM TEST INTO t_counter; SELECT COUNT(*) FROM test WHERE counter = 0 INTO t_counter; IF t_id >= 0 THEN UPDATE test SET counter = counter + 1 WHERE id = t_id; UPDATE test SET idWorker = NULL WHERE id = t_id; SELECT t_counter AS res; ELSE SELECT 'end' AS res; END IF; END $$ Now my simple C# application creates for example 3 MySQL clients in separate threads and each one executes the procedure every 100ms until there is no record where column 'counter' = 0. Unfortunately - after about 10 seconds sth is going bad. On servers there is process 'query_end' that never ends. After that - you cannot make update on the test table, MySQL returns: ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction . You cant even restart mysql. What you can do is to restart server, sometimes whole cluster. Is Galera Cluster so unreliable when you do massive concucurrent writing/updates? Hard to believe.

  Read the article

• How do i install apache on my ubuntu 12.04 where it has virtualhost

  - by YumYumYum

  According to the docs https://help.ubuntu.com/10.04/serverguide/httpd.html i have done following, and that is almost how i do always in my Fedora, but Ubuntu looks like its not working. a) DNS to IP $ echo "127.0.0.1 a" > /etc/hosts $ echo "127.0.0.1 b" > /etc/hosts b) Apache virtualhost $ ls 1 2 default default.backup default-ssl $ cat 1 <VirtualHost *:80> ServerName a ServerAlias a DocumentRoot /var/www/html/a/public <Directory /var/www/html/a/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> $ cat 2 <VirtualHost *:80> ServerName b ServerAlias b DocumentRoot /var/www/html/b/public <Directory /var/www/html/b/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> c) load into Apache and restart the service $ a2ensite 1 $ a2ensite 2 $ a2dissite default $ /etc/init.d/apache2 restart d) Browse the new 2 hosts $ firefox http://a Does not work it goes always with http://a or http://b to /var/www/html How do i fix it so that it goes to its own directory e.g: http://a goes to /var/www/html/a/public not /var/www/html?

  Read the article

• Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

  - by leemes

  I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

  Read the article

• Computer will not boot - disk read error - cannot boot from HD or DVD

  - by Grant Palin

  This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

  Read the article

• MySQL fault linked to windows shutdown failure?

  - by Roy

  As far as i understand my computer is experiencing a strange coincidence (hopefully it isn't and somebody can enlighten me). Basically i shut down my laptop (Windows 7) (at 17.20, today, to be precise) successfully (and so also did XAMPP and its included components). However upon starting my laptop up again in the last hour i noticed that the MySQL module service in my xampp control panel was not coming on (just a big red tick; incidentally everything else was working fine). Now, i had the exact same problem about two weeks ago, whereby i just reinstalled xampp and got it working again. But rather than doing this straight away i thought i would just restart my laptop first. However it won't restart (or shut down first) to be precise now. I can remember Windows wasn't shutting down properly the last time it happened (about two weeks ago). Just wondered if this coincidence pointed to any specific diagnostic as regards the problem with MYSQL? If so i would appreciate greatly any help. Otherwise sorry for wasting your time.

  Read the article

• Stronger laptop_mode in Linux

  - by Vi

  Can I have stronger laptop mode in Linux? I want to spin down the hard drive and prevent it to spin up even if something wants to read something not in cache. In general I want to have these modes: Normal Current laptop mode Stronger laptop mode: spin up only when needs to read something uncached (and cache it). No spinups to write something unless really memory pressure (Exception: explicit "sync" command in console). Kernel is allowed to keep processes in D-sleep for 10 seconds for that. Forced laptop mode: do not spin up, period. Keep offending processes in D-sleep unless I turn off this mode. Like there is a bomb instead of hard drive. I also want to have access times tracked (mount -o atime), but I don't want the hard drive to be spinned up only to update them. Is there some settings or kernel patches that can get closer to this? May be I should write special io scheduler for "forced laptop mode"? E.g. echo suspend > /sys/block/sda/queue/scheduler to lock the drive and echo cfq > /ys/block/sda/queue/scheduler to unlock it again?

  Read the article

• Need help ttoubleshooting PC

  - by brux

  I have had problems since my dog pee'd on my computer. Problem: loads windows fine, at random intervals from 5 minutes to 30 minutes it restarts itself. There is nothing in the event log such as errors, no BSOD, just cold restart. after rstarting - sometimes- it POST's and restarts itself at the end of POST. It will do this many times and then finally load windows. The cycle then begins again, it will restart eventually. What i have done: I thought it was HDD at first, since this is the only part of the coputer which actually got wet with any fluid ( the case is off the PC and the dog pee'd down the front where the HDD is located). Seatool, the seagate HDD tool, found errors when I ran it inside windows, so I ran it in DOS mode from bootable USB and ran it. It found the same number of errors and fixed them all. I ran the scan again and it says "Good". I loaded windows and ran the scan and it also said "Good there. So the HDD apears to be fine but the problem persists, random restarts. What else could this be? I have taken the computer apart and cleaned everything and also taken the PSU apart and cleaned it thoughrouly. The problem still persists, what should my next steps be? Thanks in advance.

  Read the article

• Configure X connections over TCP without using an X connection

  - by Darren Cook

  I want to run a GUI application on a remote machine I only have ssh access to. I don't need to, or want to, see the GUI window. (I know I could use something like ssh -C -X remote_server if I wanted the GUI to be on my client.) I know X is running on the remote machine, as ps shows this: root ... /usr/bin/Xorg :0 -br -audit 0 -auth /var/gdm/:0.Xauth -nolisten tcp vt7 I set DISPLAY=:0.0 but I then get "Xlib: connection to ":0.0" refused by server" when I try to use it. At Get remote x display working in linux without ssh tunneling and Xserver doesn't work unless DISPLAY=0.0 I see the advice to use gdmsetup to allow X to listen on TCP. But, gdmsetup is a GUI application! And trying to run it over ssh -X did not work ("X11 connection rejected because of wrong authentication"). So, is there a text file I can edit to remove -nolisten? And, after editing it, how do I safely restart X, remotely? (There is other stuff running on this machine, so requesting a reboot is possible, but undesirable.) If not, should gdmsetup be able to run over ssh and I should persevere in that direction? UPDATE: I had to do the ssh -X session as root (ssh as a normal user, then sudo or su, does not work.) So, I did the edit with gdmsetup. I then restarted X with gdm-restart. I've also done xhost + from that ssh -X session. The ps line no longer shows the -nolisten tcp part. But still no luck connecting to it, with either DISPLAY=:0 or DISPLAY=localhost:0

  Read the article

• How do I prevent my computer from freezing when it starts to swap?

  - by cdauth

  I work as a Java programmer, so I often have to run several programs at the same time that consume a lot of memory. When my memory is full and Linux starts swapping, my computer almost completely freezes. I can see that it is heavily writing on the hard-disk and everything reacts really slowly, often not at all. Moving the mouse in X sometimes doesn’t work at all, sometimes it has a delay of several seconds, clicking usually has a delay of several minutes. Sometimes it is possible to change to the TTY (with a long delay), there I can usually type without delay, but when I try to log in, it takes several minutes after typing in the user name until the password prompt appears, and usually an error message appears that tells me that the login timed out. So the only possibility is usually to restart the computer. I noticed that other intensive writing to the hard disk also significantly slows down my computer. Sometimes, I used rsync to limit the bandwidth when I copied files around on my own computer, as else the system would be almost unusable. How can this be? At the moment it seems more useful to me to completely turn off swapping. That might crash some processes, which is unfortunate, but the alternative at the moment is to crash all processes by turning off my computer. I am using Gentoo Linux with kernel 3.6.2-gentoo, I have a 10 GB swap partition on a HDD.

  Read the article

• Understanding ulimit -u

  - by tripleee

  I'd like to understand what's going on here. linvx$ ( ulimit -u 123; /bin/echo nst ) nst linvx$ ( ulimit -u 122; /bin/echo nst ) -bash: fork: Resource temporarily unavailable Terminated linvx$ ( ulimit -u 123; /bin/echo one; /bin/echo two; /bin/echo three ) one two three linvx$ ( ulimit -u 123; /bin/echo one & /bin/echo two & /bin/echo three ) -bash: fork: Resource temporarily unavailable Terminated one I speculate that the first 122 processes are consumed by Bash itself, and that the remaining ulimit governs how many concurrent processes I am allowed to have. The documentation is not very clear on this. Am I missing something? More importantly, for a real-world deployment, how can I know what sort of ulimit is realistic? It's a long-running daemon which spawns worker threads on demand, and reaps them when the load decreases. I've had it spin the server to its death a few times. The most important limit is probably memory, which I have now limited to 200M per process, but I'd like to figure out how I can enforce a limit on the number of children (the program does allow me to configure a maximum, but how do I know there are no bugs in that part of the code?)

  Read the article

• Timeperiod Setting

  - by Alvin G. Matunog

  I am running Nagios 3.2.3 on CentOS 5.7 32bit and I have a bit of a problem scheduling timeperiods. Please help me. Objective, to stop monitoring during server restart (since the server will be restarted and will be restarted automatically because of updates and system backup). The restart is scheduled every 1st Sunday of every month. My monitoring runs 24x7 but during restarts I want to stop the monitoring and resume after 30 mins. So every 1st Sunday I want my schedule to be 00:00-11:30,12:00-24:00. This means that it will stop at 11:30 and resumes on 12:00nn. If I set this on every Sunday there is no problem. But if I set this time on every 1st Sundays, it stops at 11:30 but resumes on the next day (Monday) and not on 12:00nn Sunday. I don't know what I am missing. If I set on regular weekdays there is no problem. But on Offset weekdays (1st Sunday) it doesn`t work the way it should have. Here is my definition; define timeperiod{ name 1st_sunday timeperiod_name 1st_sunday alias No monitoring every 1st Sunday thursday 1 00:00-11:30,12:00-24:00 } define timeperiod{ timeperiod_name irregular alias regular checking use 1st_sunday sunday 08:30-22:00 monday 08:30-22:00 tuesday 08:30-22:00 wednesday 08:30-22:00 thursday 08:30-19:10,19:20-22:00 friday 08:30-22:00 saturday 08:30-22:00 } Can anyone help me? Please? Thank you.

  Read the article

< Previous Page | 97 98 99 100 101 102 103 104 105 106 107 108  | Next Page >