Search Results

Search found 3040 results on 122 pages for 'detail'.

Page 102/122 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

  • Employee Engagement Q&A with John Brunswick

    - by Kellsey Ruppel
    As we are focusing this week on Employee Engagement, I recently sat down with industry expert and thought leader John Brunswick on the topic. Here is the Q&A dialogue we shared.  Q: How do you effectively engage employees to drive business value?A: Motivation, both extrinsic and intrinsic, combined with the relevancy of various channels to support it.  Beyond chaining business strategies like compensation models within an organization, engagement ultimately is most successful when driven by employee's motivations.  Business value derived from engagement through technical capabilities can be objectively measured through metrics like the rate and accuracy of problem solving for a given business function or frequency of innovation created.  Providing employees performing "knowledge work" with capabilities that allow them to perform work with a higher degree of accuracy in the same or ideally less time, adds value for that individual and in turn, drives their level of engagement to drive business value. Q: Organizations with high levels of employee engagement outperform the total stock market index by 22%. Can you comment on why you think this might be? A: Alignment through shared purpose.  Zappos is an excellent example of a culture that arguably has higher than average levels of employee engagement and it permeates every aspect of their organization – embodied externally through their customer experience.  I recently made my first purchase with them and it was obvious through their web experience, visual design, communication style, customer service and attention to detail down to green packaging, that they have an amazingly strong shared purpose.  The Zappos.com ‘About page’ outlines their "Family Core Values", the first three being "Deliver WOW Through Service, Embrace and Drive Change & Create Fun and A Little Weirdness" – all reflected externally in my interaction with them.  Strong shared purpose enables higher product and service experience, equating to a dedicated customer base, repeat purchases and expanded marketshare. Q: Have you seen any trends in the market regarding employee engagement? A: Some companies now see offering a form of social engagement similar to Facebook and LinkedIn as standard communication infrastructure like email or instant messaging.  Originally offered as standalone tools, the value is now seen when these capabilities are offered in an integrated fashion in the context of business entities.  An emerging area of focus is around employee activities related to their organization on external social platforms, implicitly creating external communities with employees acting on behalf of the brand and interacting with each other (e.g. Twitter).  Companies have reached a formal understand that this now established communication medium requires strategies allowing employees to engage.  I have personally met colleagues from Oracle, like Oracle User Experience Director Ultan O'Broin (@ultan), via Twitter before meeting first through internal channels. Q: Employee engagement is important, but what about engaging customers and partners? A: The last few years we have witnessed an interesting evolution from the novelty of self-service to expectations of "intelligent" self-service.  From a consumer standpoint, engagement can end up being a key differentiator, especially in mature markets.  Customers that perform some level of interaction with a brand develop greater affinity for the brand and have a greater probability of acting as an advocate.  As organizations move toward a model of deeper engagement, they must ensure that their business is positioned to support deeper relationships, offering potentially greater transparency. From a partner standpoint greater engagement can lead to new types of business opportunities, much in the way that Amazon.com offers a unified shopping experience that can potentially span various vendors.  This same model can be extended to blending services and product delivery models, based on a closeness not easily possible before increased capability of engagement mechanisms. Q: What types of solutions are available to successfully deliver employee engagement? A: Solutions enabling higher levels of engagement do so on the basis of relevancy.  This relevancy is generally supported by aspects of content management, social collaboration, business intelligence, portal and process management technologies.  These technologies can help deliver an experience tailored to a given role or process within an organization that applies equally to work that is structured or unstructured, appearing in the form of functionality as simple as an online employee directory search, knowledge communities supported by social collaboration, as well as more feature rich business intelligence dashboards and portals. Looking to learn more about how to effectively engage your employees? Check out this webcast, or read more from John Brunswick. 

    Read the article

  • Interview with Ronald Bradford about MySQL Connect

    - by Keith Larson
    Ronald Bradford,  an Oracle ACE Director has been busy working with  database consulting, book writing (EffectiveMySQL) while traveling and speaking around the world in support of MySQL. I was able to take some of his time to get an interview on this thoughts about theMySQL Connect conference. Keith Larson: What where your thoughts when you heard that Oracle was going to provide the community the MySQL Conference ?Ronald Bradford: Oracle has already been providing various different local community events including OTN Tech Days and  MySQL community days. These are great for local regions both in the US and abroad.  In previous years there has been an increase of content at Oracle Open World, however that benefits the Oracle community far more then the MySQL community.  It is good to see that Oracle is realizing the benefit in providing a large scale dedicated event for the MySQL community that includes speakers from the MySQL development teams, invested companies in the ecosystem and other community evangelists.I fully expect a successful event and look forward to hopefully seeing MySQL Connect at the upcoming Brazil and Japan OOW conferences and perhaps an event on the East Coast.Keith Larson: Since you are part of the content committee, what did you think of the submissions that were received during call for papers?Ronald Bradford: There was a large number of quality submissions to the number of available presentation sessions. As with the previous years as a committee member for the annual MySQL conference, there is always a large variety of common cornerstone MySQL features as well as new products and upcoming companies sharing their MySQL experiences. All of the usual major players in the ecosystem will in presenting at MySQL Connect including Facebook, Twitter, Yahoo, Continuent, Percona, Tokutek, Sphinx and Amazon to name a few.  This is ensuring the event will have a large number of quality speakers and a difficult time in choosing what to attend. Keith Larson: What sessions do you look forwarding to attending? Ronald Bradford: As with most quality conferences you can only be in one place at one time, so with multiple tracks per session it is always difficult to decide. The continued work and success with MySQL Cluster, and with a number of sessions I am sure will be popular. The features that interest me the most are around the optimizer, where there are several sessions on new features, and on the importance of backups. There are three presentations in this area to choose from.Keith Larson: Are you going to cover any of the content in your books at your MySQL Connect sessions?Ronald Bradford: I will be giving two presentations at MySQL Connect. The first will include the techniques available for creating better indexes where I will be touching on some aspects of the first Effective MySQL book on Optimizing SQL Statements.  In my second presentation from experiences of managing 500+ AWS MySQL instances, I will be touching on areas including SQL tuning, backup and recovery and scale out with replication.   These are the key topics of the initial books in the Effective MySQL series that focus on performance, scalability and business continuity.  The books however cover a far greater amount of detail then can be presented in a 1 hour session. Keith Larson: What features of MySQL 5.6 do you look forward to the most ?Ronald Bradford: I am very impressed with the optimizer trace feature. The ability to see exposed information is invaluable not just for MySQL 5.6, but to also apply information discerned for optimizing SQL statements in earlier versions of MySQL.  Not everybody understands that it is easy to deploy a MySQL 5.6 slave into an existing topology running an older version if MySQL for evaluation of many new features.  You can use the new mysqlbinlog streaming feature for duplicating master binary logs on an older version with a MySQL 5.6 slave.  The improvements in instrumentation in the Performance Schema are exciting.   However, as with my upcoming Replication Techniques in Depth title, that will be available for sale at MySQL Connect, there are numerous replication features, some long overdue with provide significant management benefits. Crash Save Slaves, Global transaction Identifiers (GTID)  and checksums just to mention a few.Keith Larson: You have been to numerous conferences, what would you recommend for people at the conference? Ronald Bradford: Make the time to meet and introduce yourself to the speakers that cover the topics that most interest you. The MySQL ecosystem has a very strong community.  The relationships you build with presenters, developers and architects in MySQL can be invaluable, however they are created over time. Get to know these people, interact with them over time.  This is the opportunity to learn more then just the content from a 1 hour session. Keith Larson: Any additional tips to handling the long hours ? Ronald Bradford: Conferences can be hard, especially with all the post event drinking.  This is a two day event and I am sure will include additional events on Friday and Saturday night so come well prepared, and leave work behind. Take the time to learn something new.   You can always catchup on sleep later. Keith Larson: Thank you so much for taking some time to do this I look forward to seeing you at the MySQL Connect conference.  Please stay tuned here for more updates on MySQL. 

    Read the article

  • Branching and Merging Improvements in TFS2010

    - by jehan
    Introducing the concept of “first class branches” is a significant improvement as part of the 2010 release with respect to version control.  Not only does it help to distinguish between folders and branches, but it enables branch visualizations. Let us see improvements in detail. ·         In TFS2008, you don’t know which of the folders are Branches: All folders looks the same, all have the folder icon. Now, In TFS 2010 there is a new icon that shows which of the folder is a Branch.       ·      There is no visual means to manage branches in TFS2008:   You dont have any means to identify which branches are related and the relation type. Now, In TFS 2010 you have visual tools to see the Branches Hierarchy. In order to see a Branch Hierarchy just Right Click the Branch and choose: Branching and Merging –> View Hierarchy     ·         In TFS2008, there is no option to track changes path between the Branches:  If you have made a merge in a Branch you can’t track from which Branch this Merge came from. Now, you have the tools that shows the path of change between the Branches, you can also see where change was added on a timeline.  In order to track a change do the following: Step1: Right click the Branch and click View History   Step 2: Choose a changeset to track and click the “Track Changeset” button.     Step 3: Choose the branches that will be in the view and click “Visualize”. In above visual, you can see that Changesets 108,109,110 and 119 where merged from Main to Release1.0 Branch and then “Release_1.0” Branched to “Dev1.0. Step4: You can also see the Merges on a Timeline by clicking on the “Timeline Tracking” button.   Creating New Branches: In TFS 2010, the creation of branches has been streamlined a bit from the process in 2008.  In 2008, creating a new branch was like every other action in the system – changes were pended on the client, and then checked in to the server. Because of this creating new branch in TFS2008 was time-consuming process.  In TFS2010, the step where changes are pended has been bypassed and now performing the branch creation is entirely on the server.  With this approach, the round trip time for downloading a copy of each file on the branch and then uploading each file again has been eliminated.  Note: In TFS2010, the new branch will be created and committed as a single operation on the server. Pending changes will not be created, it doesn’t require a check-in as it will be carried out as a single operation and it’s not possible to cancel.     Manage Branch Permissions: The properties view for branches is also different than that of ordinary folders or file, containing some metadata for the branch, relationship information, and permissions for the branch. In TFS2008, the users who have checkout and Check-in permissions can create a branch. But, In TFS2010 you can control the permissions for Branches using Manage Branch permissions.   Reparent option in TFS2010: In TFS2008, if we have two branches which don’t have parent-child relation and we want perform merge between these two branches then we have to perform baseless merge using tf.exe command line. I have two branches Release_1.0 and Dev1.0_F2 which don’t have any relation between them, that’s why when I click on merge option in Release_1.0, in Target Branch it’s not showing Dev1.0_F2 branch to perform the merges.     Let us see what can we do for this in TFS2010, first perform a TFS baseless merge to establish a relationship between the parent branch and the child branches.  It will only merge the folder, not its contents. TFS baseless merges are performed via the command line using VS2010 command prompt and do the following:   tf merge /baseless <ParentBranch> <childBranch> Check in your pending changes. It will create the link between the branches but the relationships are still not completed.  Now, select the child branch in Source Control Explorer and from the File menu choose Source Control –> Branching and Merging –> Reparent.      In the dialog box,  choose the appropriate branch as the new parent.   Click Reparent and then go to parent branch and click merge. Now, will see that in Target Branch option Dev1.0_F2 branch is added.         Converting Folders to Branches and Branches to Folders: You can convert any Folder as Branch from Context Menu by performing right click on the folderàBranching and MergingàConvert to Branch. In similar way, you can convert the Branches to Folder using Convert to Folder option available in File Menu (FileàSource ControlàBranching and MergingàConvert to Branch). This option is not available in context menu.

    Read the article

  • Windows Phone 7 Review &ndash; Part 1: LG Quantum

    - by Nikita Polyakov
    As many of my fellow geeks, I ran out and got a retail windows Phone 7 on the first day. Just had to have it :) I’ve had the developer prototypes in my hands for previous 3 months on and off, so I finally wanted to have one I call my own. I’ve rushed the Launch   I’ve checked out both AT&T and T-Mobile offerings on day 1 and decided on a Samsung Focus. Great screen, super light and thin. If you don’t believe me that this phone can compete with the best of the non-Phone 7 offerings - get it in your hand to compare for yourself. I have to say that even though the on-screen keyboard on Windows Phone 7 is one of the best, the amount of text I write on my phone and my expectation of how long that takes for a short reply are very high. Also the phone being so slick and sexy did not feel solid or confident in my hand or pocket. As the dust settled   Arrives the LG Quantum – now on AT&T and worldwide. First impression of the softer plastic, the back battery cover is solid metal - the entire phone feels solid and indestructible! Phone fits just right in my hand, it’s almost too good. It does not feel like it will crack in your jeans. I feel safe holding it and don’t feel like if I or someone were to bump into me walking it’d fly out of my hand. I’ve dropped and had thrown the Focus a few times on accident as it’s weight is negligible. I won’t even dream of lying the first day adjusting to a 3.5’ LCD screen from the Samsung’s blistering bright and poppy AMOLED 4’ was hard. But the colors and sharpness are still very good. I find it almost easier on the eyes actually for day to day use.  I had a chance to lay the phone down in the line with the prototypes and final versions of other phones that had LCD screens – LG makes HTC looks like a budget LCD compared to a high end LCD in the home theatre department. I am consistently complemented by friends that have the HD7 or Surround on how much better my screen looks. The screen just looks like the most color correct phone out of the line up. Even next to Samsung it makes it look oversaturated, but can’t match the true blacks compensating with true white.   Day to Day Usability   What I also noticed that is a huge difference is how much I am not accidently hitting the soft keys at the bottom. I real pain on Focus since holding it in am average size hand already would accidently touch the controls at the bottom. QWERTY keyboard on this phone is great. It’s like the mission for LG is “make it solid!”. Keyboard has a very durable feel.   LG’s has a secret wild card though is the DLNA support. If you seen an ad for it, you should. Imagine this – playing a song from your phone straight to your network connected A/V receiver. Done. Pictures to TV. Done. Video. Done. DLNA works with components that advertise to as well as Windows 7, XBOX 360 and other consoles.  I will write an extensive review of that experience in near future. LG Exclusive apps – from panorama photo taker to voice to text translator and even look-n-type app that works like a backup inverse camera, there is quite a bit there that won’t be found on the other phones. I’ll review those in more detail in another segment. Conclusion So for a quick comparison: If you want a phone that is super thin, light and is core reference of a Windows Phone 7 – Samsung Focus it is. If you want a great phone with solid secure feel, real keyboard, media features - the hands down winner is LG Quantum.   You can pick up the LG Quantum at AT&T in US and worldwide as LG Optimus 7Q.   Final thought: I have not had SmartPhone that I felt was a reliable trusty primary communication device since Samsung BlackJack II, this time the LG got the crown.   [ Disclosure: Phone was provided to me free of charge. That has been the case for all of my phones for years, nothing new - I get them all. ]

    Read the article

  • Row Count Plus Transformation

    As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

    Read the article

  • Create a Smoother Period Close

    - by Get Proactive Customer Adoption Team
    Untitled Document Do You Use Oracle E-Business Suite Products Involved in Accounting Period Closes? We understand that closing the periods in your system at the end of an accounting period enables your company to make the right business decisions. We also know this requires prior preparation, good procedures, and quality data. To help you meet that need, Oracle E-Business Suite’s proactive support team developed the Period Close Advisor to help your organization conduct a smooth period close for its Oracle E-Business Suite 12 products. The Period Close Advisor is composed of logical steps you can follow, aligned by the business requirement flow. It will help with an orderly close of the product sub-ledgers before posting to the General Ledger. It combines recommendations and industry best practices with tips from subject matter experts for troubleshooting. You will find patches needed and references to assist you during each phase. Get to know the E-Business Suite Period Close Advisor The Period Close Advisor does more than help the users of Oracle E-Business Suite products close their period. You can use it before and throughout the period to stay on track. Proactively it assists you as you set up your company’s period close process. During the period, it helps evaluate your system’s readiness for initiating the period close procedures and prepare the system for a smooth period close experience. The Period Close Advisor gets you to answers when you have questions and gives you the latest news from us on Oracle E-Business Suite’s period close. The Period Close Advisor is the right place to start. How to Use the E-Business Suite Period Close The Period Close Advisor graphically guides you through your period close. The tabs show you the products (also called applications or sub-ledgers) covered, and the product order required for the processing to handle any dependencies between the products. Users of all the products it covers can benefit from the information it contains. Structure of the Period Close Advisor Clicking on a tab gives you the details for that particular step in the process. This includes an overview, showing how the products fit into the overall period close process, and step-by-step information on each phase needed to complete the period close for the tab. You will also find multimedia training and related resources you can access if you need more information. Once you click on any of the phases, you see guidance for that phase. This can include: Tips from the subject-matter experts—here are examples from a Cash Management specialist: “For organizations with high transaction volumes bank statements should be loaded and reconciled on a daily basis.” “The automatic reconciliation process can be set up to create miscellaneous transactions automatically.” References to useful Knowledge Base documents: Information Centers for the products and features FAQs on functionality Known Issues and patches with both the errors and their solutions How-to documents that explain in detail how to use a feature or complete a process White papers that give overview of a feature, list setup required to use the feature, etc. Links to diagnosticsthat help debug issues you may find in a process Additional information and alerts about a process or reports that can help you prevent issues from surfacing This excerpt from the “Process Transaction” phase for the Receivables product lists documents you’ll find helpful. How to Get Started with the Period Close Advisor The Period Close Advisor is a great resource that can be used both as a proactive tool (while setting up your period end procedures) and as the first document to refer to when you encounter an issue during the period close procedures! As mentioned earlier, the order of the product tabs in the Period Close Advisor gives you the recommended order of closing. The first thing to do is to ensure that you are following the prescribed order for closing the period, if you are using more than one sub-ledger. Next, review the information shared in the Evaluate and Prepare and Process Transactions phases. Make sure that you are following the recommended best practices; you have applied the recommended patches, etc. The Reconcile phase gives you the recommended steps to follow for reconciling a sub-ledger with the General Ledger. Ensure that your reconciliation procedure aligns with those steps. At any stage during the period close processing, if you encounter an issue, you can revisit the Period Close Advisor. Choose the product you have an issue with and then select the phase you are in. You will be able to review information that can help you find a solution to the issue you are facing. Stay Informed Oracle updates the Period Close Advisor as we learn of new issues and information. Bookmark the Oracle E-Business Suite Period Close Advisor [ID 335.1] and keep coming back to it for the latest information on period close

    Read the article

  • Walmart and Fusion Apps

    - by ultan o'broin
    Photograph: Misha Vaughan I attended Fusion Apps (yes, I know I am supposed to say "Oracle Fusion Applications", but stuffy old style guides are a turn-off in interwebs conversations) User Experience Advocate (FXA) training in Long Beach, California last week; a suitable location as ODTUG KSCOPE 11 was kicking off and key players were in the area. As a member of Oracle's Apps-UX team I know the Fusion Apps messaging, natch, and done some other Fusion Apps go-to-market content work too. For the messaging details themselves, see Lonneke Dikmans (@lonnekedikmans) great blog, by the way. However, I wanted some 'formal' training combined with the opportunity to meet and learn from people already out there delivering those messages. The idea in me reaching out to Misha Vaughan, Apps-UX FXA maven, to get me onto this training was that in addition to my UX knowledge, I could leverage my location in EMEA and hit up customer events more quickly and easily. Those local user groups do like to hear the voice of locals too you know (so I need to work on that mid-Atlantic accent). I'm looking forward to such opportunities. The training was all smashing stuff, just the right level of detail, delivered professionally and with great style and humor. I was especially honored to be paired off for my er, coaching with Debra Lilley (@debralilley), who shared with everyone all kinds of tips and insights from her experiences of delivering the message and demo. For me, that was the real power of the FXA event--the communal, conversational aspect--the meeting up with people who had done all this for real, the sharing in their experiences, while learning along with other newbies. Sorry, but that all-important social aspect doesn't work so well with remote meetings. Katie Candland (Apps-UX) gave us a great tour of the Fusion Apps demo and included some useful presentational tips too (any excuse to buy that iPad). It's clear to me that the Fusion Apps messaging and demos really come alive with real-world examples that local application users will recognize, and I picked up some "yes, that's my job made easier" scene-stealers from Debra and Karen Brownfield too, to add to the great ones already provided. This power of examples shouldn't surprise anyone, they've long been a mainstay of applications user assistance, popular with users. We'll offer customers different types of example topics in the Fusion Apps online help too (stay tuned), and we know from research how important those 3S's (stories, scenarios, and simulations) are to users when they consume and apply information. Well, we've got the simulation, now it's time for more stories and scenarios. If you get a chance to participate in an FXA event (whether you are an Oracle employee or otherwise), I'd encourage it. It's committing your time and energy for sure, but I got real bang for the buck from it for my everyday job too. Listening to the room's feedback on the application demo really brought our internal design work to life, and I picked up on some things that I need to follow up on (like how you alphabetically sort stuff in other languages). User experience is after all, about users. What will I be doing next, and what would I like to see happen? Obviously, I need to develop my story-telling links with the people I met in Long Beach and do some practicing with the materials, and then get out there and deliver them at a suitable location. The demo is what it is right now, and that's a super-rich demo that I know everyone will want to see and ask questions about. Then, as mentioned by attendees at the FXA event, follow up on those translated and localized messages for EMEA (and APAC), that deal with different statutory or reporting requirements of the target markets. Given my background I would say that, wouldn't I? However, language is part of the UX, and international revenue is greater than US-only revenue for Oracle, so yes dear, we all need to get over the fact that enterprise apps users don't all speak, or want to speak, American-English. Most importantly perhaps, the continued development of a strong messaging community between Oracle and partners and customers where we can swap and share those FXA messaging stories and scenarios about Fusion Apps in a conversational way. The more the better, a combination of online and face-to-face meetings. I must also mention the great dinner after the event at Parker's Lighthouse, and the fun myself and Andrew Gilmour (Apps-UX) had at our end of the table talking about just about everything except Fusion Apps with Ronald Van Luttikhuizen and Ben Prusinski (who now understands the difference between Cork and Dublin people. I hope). Thanks to all the Apps-UXers who helped bring the FXA training to town, and to Debra and all the others that I am too jetlagged to mention right who were instrumental in making it happen for me. Here's to the next one. And the Walmart angle? That was me doing my Robert Scoble (ScO'bilizer?)-style guerilla smart phone research in Walmart in Long Beach, before the FXA event. It's all about stories for me. You can read more about it on the appslab blog (see the comments).

    Read the article

  • Detecting Duplicates Using Oracle Business Rules

    - by joeywong-Oracle
    Recently I was involved with a Business Process Management Proof of Concept (BPM PoC) where we wanted to show how customers could use Oracle Business Rules (OBR) to easily define some rules to detect certain conditions, such as duplicate account numbers, duplicate names, high transaction amounts, etc, in a set of transactions. Traditionally you would have to loop through the transactions and compare each transaction with each other to find matching conditions. This is not particularly nice as it relies on more traditional approaches (coding) and is not the most efficient way. OBR is a great place to house these types’ of rules as it allows users/developers to externalise the rules, in a simpler manner, externalising the rules from the message flows and allows users to change them when required. So I went ahead looking for some examples. After quite a bit of time spent Googling, I did not find much out in the blogosphere. In fact the best example was actually from...... wait for it...... Oracle Documentation! (http://docs.oracle.com/cd/E28271_01/user.1111/e10228/rules_start.htm#ASRUG228) However, if you followed the link there was not much explanation provided with the example. So the aim of this article is to provide a little more explanation to the example so that it can be better understood. Note: I won’t be covering the BPM parts in great detail. Use case: Payment instruction file is required to be processed. Before instruction file can be processed it needs to be approved by a business user. Before the approval process, it would be useful to run the payment instruction file through OBR to look for transactions of interest. The output of the OBR can then be used to flag the transactions for the approvers to investigate. Example BPM Process So let’s start defining the Business Rules Dictionary. For the input into our rules, we will be passing in an array of payments which contain some basic information for our demo purposes. Input to Business Rules And for our output we want to have an array of rule output messages. Note that the element I am using for the output is only for one rule message element and not an array. We will configure the Business Rules component later to return an array instead. Output from Business Rules Business Rule – Create Dictionary Fill in all the details and click OK. Open the Business Rules component and select Decision Functions from the side. Modify the Decision Function Configuration Select the decision function and click on the edit button (the pencil), don’t worry that JDeveloper indicates that there is an error with the decision function. Then click the Ouputs tab and make sure the checkbox under the List column is checked, this is to tell the Business Rules component that it should return an array of rule message elements. Updating the Decision Service Next we will define the actual rules. Click on Ruleset1 on the side and then the Create Rule in the IF/THEN Rule section. Creating new rule in ruleset Ok, this is where some detailed explanation is required. Remember that the input to this Business Rules dictionary is a list of payments, each of those payments were of the complex type PaymentType. Each of those payments in the Oracle Business Rules engine is treated as a fact in its working memory. Implemented rule So in the IF/THEN rule, the first task is to grab two PaymentType facts from the working memory and assign them to temporary variable names (payment1 and payment2 in our example). Matching facts Once we have them in the temporary variables, we can then start comparing them to each other. For our demonstration we want to find payments where the account numbers were the same but the account name was different. Suspicious payment instruction And to stop the rule from comparing the same facts to each other, over and over again, we have to include the last test. Stop rule from comparing endlessly And that’s it! No for loops, no need to keep track of what you have or have not compared, OBR handles all that for you because everything is done in its working memory. And once all the tests have been satisfied we need to assert a new fact for the output. Assert the output fact Save your Business Rules. Next step is to complete the data association in the BPM process. Pay extra care to use Copy List instead of the default Copy when doing data association at an array level. Input and output data association Deploy and test. Test data Rule matched Parting words: Ideally you would then use the output of the Business Rules component to then display/flag the transactions which triggered the rule so that the approver can investigate. Link: SOA Project Archive [Download]

    Read the article

  • Oracle GoldenGate 12c - Leading Enterprise Replication

    - by Doug Reid
    Oracle GoldenGate 12c released  on October 17th and includes several new cutting edge features that firmly establishes GoldenGate's leader position in the data replication space.   In fact, this release more than doubles the performance of data delivery, supports Oracle's new multitenant database feature,  it's more secure, has more options for high availability, and has made great strides to simplify the configuration and deployment of the product.     Read through the press release if you haven't already and do not miss the quote from Cern's Eva Dafonte Perez, regarding Oracle GoldenGate 12c "….performs five times faster compared to previous GoldenGate versions and simplifies the management of a multi-tier environment" There are a variety of new and improved features in the Oracle GoldenGate 12c.  Here are the highlights: Optimized for Oracle Database 12c -  GoldenGate 12c is custom tailored to the unique capabilities of Oracle database 12c and out of the box GoldenGate 12c supports multitenant (pluggable database (PDB)) and non-consolidated deployments of Oracle Database 12c.   The naming convention used by database 12c is now in three parts (PDB-name, schema-name, and object name).  We have made changes to the GoldenGate capture process to support the new naming convention and streamlined the whole process so a single GoldenGate capture process is being used at the container level rather than at each individual PDB.  By having the capture process at the container level resource usage and the number of processes are reduced. To view a conceptual architecture diagram click here. Integrated Delivery for the Oracle Database - Leveraging a lightweight streaming API built exclusively for Oracle GoldenGate 12c, this process distributes load, auto tunes the degree of parallelism, scales better, and delivers blinding rates of changed data delivery to the Oracle database.  One of the goals for Oracle GoldenGate 12c was to reduce IT costs by simplifying the configuration and reduce the time to manage complex infrastructures.  In previous versions of Oracle GoldenGate, customers would split transaction loads by grouping tables into multiple different delivery processes (click here to view the previous method). Each delivery process executed independently and without any interaction or knowledge of other delivery processes.  This setup was complicated to configure and time consuming as the developer needed in-depth knowledge of the source and target schemas and the transaction profile. With GoldenGate 12c and Integrated Delivery we have made it easier to configure and faster to deploy.  To view a conceptual architecture diagram of integrated delivery click here Coordinated Delivery for Non-Oracle Databases - Coordinated Delivery orchestrates high-speed apply processes and simplifies the configuration of GoldenGate for non-Oracle targets. In Oracle GoldenGate 12c a single delivery process is used with multiple threads (click here) and key events, such as primary key updates, event markers, DDL, etc, are coordinated between the various threads to insure that the transactions are applied in the same sequence as they were captured, all while delivery improved performance.  Replication Between On-Premises and Cloud-Based systems. - The trend for business to utilize both on-premises and cloud-based systems is rising and businesses need to replicate data back and forth.   GoldenGate 12c can be configured in a variety of ways to provide real-time replication when unrestricted or restricted (limited ports or HTTP tunneling) networks are between on-premises and cloud-based systems.    Expanded Heterogeneity - It wouldn't be a GoldenGate release without new and improved platform support.   Release 1 includes support for MySQL 5.6 and Sybase 15.7.   Upcoming in the next release GoldenGate, support will be expanded for MS SQL Server, DB2, and Teradata. Tighter Security - Oracle GoldenGate 12c is integrated with the Oracle wallet to shield usernames and passwords using strong encryption and aliases.   Customers accustomed to using the Oracle Wallet with other Oracle products will instantly be familiar with how to use this great new feature Expanded Oracle Application and Technology Support -   GoldenGate can be used along with Oracle Coherence to enable real-time changed data feeds to the Coherence cache using Toplink and the Oracle GoldenGate JMS adapter.     Plus,  Oracle Advanced Customer Services (ACS) now offers a low downtime E-Business Suite platform and database migrations using GoldenGate as the enabling technology.  Keep tuned for more blogs on the new features and the upcoming launch webcast where we will go into these new features in more detail.   In the mean time make sure to read through our white paper "Oracle GoldenGate 12c Release 1 New Features Overview"

    Read the article

  • WebLogic JDBC Use of Oracle Wallet for SSL

    - by Steve Felts
    Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

    Read the article

  • Implement Tree/Details With Taskflow Regions Using EJB

    - by Deepak Siddappa
    This article describes on Display Tree/Details using taskflow regions.Use Case DescriptionLet us take scenario where we need to display Tree/Details, left region contains category hierarchy with items listed in a tree structure (ex:- Region-Countries-Locations-Departments in tree format) and right region contains the Employees list.In detail, Here User may drills down through categories using a tree until Employees are listed. Clicking the tree node name displays Employee list in the adjacent pane related to particular tree node. Implementation StepsThe script for creating the tables and inserting the data required for this application CreateSchema.sql Lets create a Java EE Web Application with Entities based on Regions, Countries, Locations, Departments and Employees table. Create a Stateless Session Bean and data control for the Stateless Session Bean. Add the below code to the session bean and expose the method in local/remote interface and generate a data control for that.Note:- Here in the below code "em" is a EntityManager. public List<Employees> empFilteredByTreeNode(String treeNodeType, String paramValue) { String queryString = null; try { if (treeNodeType == "null") { queryString = "select * from Employees emp ORDER BY emp.employee_id ASC"; } else if (Pattern.matches("[a-zA-Z]+[_]+[a-zA-Z]+[_]+[[0-9]+]+", treeNodeType)) { queryString = "select * from employees emp INNER JOIN departments dept\n" + "ON emp.department_id = dept.department_id JOIN locations loc\n" + "ON dept.location_id = loc.location_id JOIN countries cont\n" + "ON loc.country_id = cont.country_id JOIN regions reg\n" + "ON cont.region_id = reg.region_id and reg.region_name = '" + paramValue + "' ORDER BY emp.employee_id ASC"; } else if (treeNodeType.contains("regionsFindAll_bc_countriesList_1")) { queryString = "select * from employees emp INNER JOIN departments dept \n" + "ON emp.department_id = dept.department_id JOIN locations loc \n" + "ON dept.location_id = loc.location_id JOIN countries cont \n" + "ON loc.country_id = cont.country_id and cont.country_name = '" + paramValue + "' ORDER BY emp.employee_id ASC"; } else if (treeNodeType.contains("regionsFindAll_bc_locationsList_1")) { queryString = "select * from employees emp INNER JOIN departments dept ON emp.department_id = dept.department_id JOIN locations loc ON dept.location_id = loc.location_id and loc.city = '" + paramValue + "' ORDER BY emp.employee_id ASC"; } else if (treeNodeType.trim().contains("regionsFindAll_bc_departmentsList_1")) { queryString = "select * from Employees emp INNER JOIN Departments dept ON emp.DEPARTMENT_ID = dept.DEPARTMENT_ID and dept.DEPARTMENT_NAME = '" + paramValue + "'"; } } catch (NullPointerException e) { System.out.println(e.getMessage()); } return em.createNativeQuery(queryString, Employees.class).getResultList(); } In the ViewController project, create two ADF taskflow with page Fragments and name them as FirstTaskflow and SecondTaskflow respectively. Open FirstTaskflow,from component palette drop view(Page Fragment) name it as TreeList.jsff. Open SeconfTaskflow, from component palette drop view(Page Fragment) name it as EmpList.jsff and create two paramters in its overview parameters tab as shown in below image. Open TreeList.jsff , from data control palette drop regionsFindAll->Tree as ADF Tree. In Edit Tree Binding dialog, for Tree Level Rules select the display attributes as follows:-model.Regions - regionNamemodel.Countries - countryNamemodel.Locations - citymodel.Departments - departmentName In structure panel, click on af:Tree - t1 and select selectionListener with edit property. Create a "TreeBean" managed bean with scope as "session" as shown in below Image. Create new method as getTreeNodeSelectedValue and click ok. Open TreeBean managed bean and add the below code: private String treeNodeType; private String paramValue; public void getTreeNodeSelectedValue(SelectionEvent selectionEvent) { RichTree tree = (RichTree)selectionEvent.getSource(); RowKeySet addedSet = selectionEvent.getAddedSet(); Iterator i = addedSet.iterator(); TreeModel model = (TreeModel)tree.getValue(); model.setRowKey(i.next()); JUCtrlHierNodeBinding node = (JUCtrlHierNodeBinding)tree.getRowData(); //oracle.jbo.Row Row rw = node.getRow(); Object selectedTreeNode = node.getAttribute(0); Object treeListType = node.getBindings(); String treeNodeType = treeListType.toString(); this.setParamValue(selectedTreeNode.toString()); this.setTreeNodeType(treeNodeType); } public void setTreeNodeType(String treeNodeType) { this.treeNodeType = treeNodeType; } public String getTreeNodeType() { return treeNodeType; } public void setParamValue(String paramValue) { this.paramValue = paramValue; } public String getParamValue() { return paramValue; }<br /> Open EmpList.jsff , from data control palette drop empFilteredByTreeNode->Employees->Table as ADF Read-only Table. After selecting the  Employees result set, in Edit Action Binding dialog window pass the pageFlowScope parameters as shown in below Image. In empList.jsff page, click Binding tab and click on Create Executable binding and select Invoke action and follow as shown in below image. Edit executeEmpFiltered invoke action properties and set the Refresh to ifNeeded, So when ever the page needs the method will be executed. Create Main.jspx page with page template as Oracle Three Column Layout. Drop FirstTaskflow as Region in start facet and drop SecondTaskflow as Region in center facet, Edit task Flow Binding dialog window pass the Input Paramters as shown in below Image. Run the Main.jspx, tree will be displayed in left region and emp details will displyaed on the right region. Click on the Americas in tree node, all emp related to the Americas related will be displayed. Click on Americas->United States of America->South San Francisco->Accounting, only employee belongs to the Accounting department will be displayed.

    Read the article

  • Updating a database connection password using a script

    - by Tim Dexter
    An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

    Read the article

  • How to move MOSS 2007 to another SharePoint Farm

    - by DipeshBhanani
    It was time of my first onsite client assignment on SharePoint. Client had one server production environment. They wanted to upgrade the topology with completely new SharePoint Farm of three servers. So, the task was to move whole MOSS 2007 stuff to the new server environment without impacting data. The last three words “… without impacting data…” were actually putting pressure on my head. Moreover SSP was required to move because additional information has been added for users apart from AD import.   I thought I had to do only backup and restore. It appeared pretty easy at first thought. Just because of these three damn scary words, I thought to check out on internet for guidance related to this scenario. I couldn’t get anything except general guidance of moving server on Microsoft TechNet site. I promised myself for starting blogs with this post if I would be successful in this task. Well, I took long time to write this but finally made it. I hope it will be useful to all guys looking for SharePoint server movement.   Before beginning restoration, make sure that, there is no difference in versions of SharePoint at source and destination server. Also check whether the state of SharePoint Installation at the time of backup and restore is same or not. (E.g. SharePoint related service packs and patches if any)   The main tasks of the server movement are as follow:   1.        Backup all the databases 2.        Install and configure SharePoint on new environment 3.        Deploy all solutions (WSP Files) globally to destination server- for installing features attached to the solutions 4.        Install all the custom features 5.        Deploy/Copy custom pages/files which are added to the “12Hive” folder later 6.        Restore SSP 7.        Restore My Site 8.        Restore other web application   Tasks 3 to 5 are for making sure that we have configured the environment well enough for the web application to be restored successfully. The main and complex task was restoring SSP. I have started restoring SSP through Central Admin. After a while, the restoration status was updated to “unsuccessful”. “Damn it, what went wrong?” I thought looking at the error detail down the page. I couldn’t remember the error message but I had corrected and restored it again.   Actually once you fail restoring SSP, until and unless you don’t clean all related stuff well, your restoration will be failed again and again. I wanted to find the actual reason. So cleaned, restored, cleaned, restored… I had tried almost 5-6 times and finally, I succeeded. I had realized how pleasant it is, to see the word “Successful” on the screen. Without wasting your much time to read, let me write all the detailed steps of restoring SSP:   1.        Delete the SSP through following STSADM command. stsadm -o deletessp -title <SSP name> -deletedatabases -force e.g.: stsadm -o deletessp -title SharedServices1 -deletedatabases –force 2.        Check and delete the web application associated with SSP if it exists. 3.        Remove Link from Check and remove “Alternate Access Mapping” associated with SSP if it exists. 4.        Check and delete IIS site as well as application pool associated with SSP if it exists. 5.        Stop following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search   6.        Delete all the databases associated/related to SSP from SQL Server. 7.        Reset IIS. 8.        Start again following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search   9.        Restore the new SSP.   After the SSP restoration, all other stuffs had completed very smoothly without any more issues. I did few modifications to sites for change of server name and finally, the new environment was ready.

    Read the article

  • Checksum Transformation

    The Checksum Transformation computes a hash value, the checksum, across one or more columns, returning the result in the Checksum output column. The transformation provides functionality similar to the T-SQL CHECKSUM function, but is encapsulated within SQL Server Integration Services, for use within the pipeline without code or a SQL Server connection. As featured in The Microsoft Data Warehouse Toolkit by Joy Mundy and Warren Thornthwaite from the Kimbal Group. Have a look at the book samples especially Sample package for custom SCD handling. All input columns are passed through the transformation unaltered, those selected are used to generate the checksum which is passed out through a single output column, Checksum. This does not restrict the number of columns available downstream from the transformation, as columns will always flow through a transformation. The Checksum output column is in addition to all existing columns within the pipeline buffer. The Checksum Transformation uses an algorithm based on the .Net framework GetHashCode method, it is not consistent with the T-SQL CHECKSUM() or BINARY_CHECKSUM() functions. The transformation does not support the following Integration Services data types, DT_NTEXT, DT_IMAGE and DT_BYTES. ChecksumAlgorithm Property There ChecksumAlgorithm property is defined with an enumeration. It was first added in v1.3.0, when the FrameworkChecksum was added. All previous algorithms are still supported for backward compatibility as ChecksumAlgorithm.Original (0). Original - Orginal checksum function, with known issues around column separators and null columns. This was deprecated in the first SQL Server 2005 RTM release. FrameworkChecksum - The hash function is based on the .NET Framework GetHash method for object types. This is based on the .NET Object.GetHashCode() method, which unfortunately differs between x86 and x64 systems. For that reason we now default to the CRC32 option. CRC32 - Using a standard 32-bit cyclic redundancy check (CRC), this provides a more open implementation. The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox by hand. This process has been described in detail in the related FAQ entry for How do I install a task or transform component?, just select Checksum from the SSIS Data Flow Items list in the Choose Toolbox Items window. Downloads The Checksum Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Checksum Transformation for SQL Server 2005 Checksum Transformation for SQL Server 2008 Checksum Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.27 – SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2010) SQL Server 2008 Version 2.0.0.27 – Fix for CRC-32 algorithm that inadvertently made it sort dependent. Fix for race condition which sometimes lead to the error Item has already been added. Key in dictionary: '79764919' . Fix for upgrade mappings between 2005 and 2008. (19 Oct 2010) Version 2.0.0.24 - SQL Server 2008 release. Introduces the new CRC-32 algorithm, which is consistent across x86 and x64.. The default algorithm is now CRC32. (29 Oct 2008) Version 2.0.0.6 - SQL Server 2008 pre-release. This version was released by mistake as part of the site migration, and had known issues. (20 Oct 2008) SQL Server 2005 Version 1.5.0.43 – Fix for CRC-32 algorithm that inadvertently made it sort dependent. Fix for race condition which sometimes lead to the error Item has already been added. Key in dictionary: '79764919' . (19 Oct 2010) Version 1.5.0.16 - Introduces the new CRC-32 algorithm, which is consistent across x86 and x64. The default algorithm is now CRC32. (20 Oct 2008) Version 1.4.0.0 - Installer refresh only. (22 Dec 2007) Version 1.4.0.0 - Refresh for minor UI enhancements. (5 Mar 2006) Version 1.3.0.0 - SQL Server 2005 RTM. The checksum algorithm has changed to improve cardinality when calculating multiple column checksums. The original algorithm is still available for backward compatibility. Fixed custom UI bug with Output column name not persisting. (10 Nov 2005) Version 1.2.0.1 - SQL Server 2005 IDW 15 June CTP. A user interface is provided, as well as the ability to change the checksum output column name. (29 Aug 2005) Version 1.0.0 - Public Release (Beta). (30 Oct 2004) Screenshot

    Read the article

  • Agile Executives

    - by Robert May
    Over the years, I have experienced many different styles of software development. In the early days, most of the development was Waterfall development. In the last few years, I’ve become an advocate of Scrum. As I talked about last month, many people have misconceptions about what Scrum really is. The reason why we do Scrum at Veracity is because of the difference it makes in the life of the team doing Scrum. Software is for people, and happy motivated people will build better software. However, not all executives understand Scrum and how to get the information from development teams that use Scrum. I think that these executives need a support system for managing Agile teams. Historical Software Management When Henry Ford pioneered the assembly line, I doubt he realized the impact he’d have on Management through the ages. Historically, management was about managing the process of building things. The people were just cogs in that process. Like all cogs, they were replaceable. Unfortunately, most of the software industry followed this same style of management. Many of today’s senior managers learned how to manage companies before software was a significant influence on how the company did business. Software development is a very creative process, but too many managers have treated it like an assembly line. Idea’s go in, working software comes out, and we just have to figure out how to make sure that the ideas going in are perfect, then the software will be perfect. Lean Manufacturing In the manufacturing industry, Lean manufacturing has revolutionized Henry Ford’s assembly line. Derived from the Toyota process, Lean places emphasis on always providing value for the customer. Anything the customer wouldn’t be willing to pay for is wasteful. Agile is based on similar principles. We’re building software for people, and anything that isn’t useful to them doesn’t add value. Waterfall development would have teams build reams and reams of documentation about how the software should work. Agile development dispenses with this work because excessive documentation doesn’t add value. Instead, teams focus on building documentation only when it truly adds value to the customer. Many other Agile principals are similar. Playing Catch-up Just like in the manufacturing industry, many managers in the software industry have yet to understand the value of the principles of Lean and Agile. They think they can wrap the uncertainties of software development up in a nice little package and then just execute, usually followed by failure. They spend a great deal of time and money trying to exactly predict the future. That expenditure of time and money doesn’t add value to the customer. Managers that understand that Agile know that there is a better way. They will instead focus on the priorities of the near term in detail, and leave the future to take care of itself. They have very detailed two week plans with less detailed quarterly plans. These plans are guided by a general corporate strategy that doesn’t focus on the exact implementation details. These managers also think in smaller features rather than large functionality. This adds a great deal of value to customers, since the features that matter most are the ones that the team focuses on in the near term and then are able to deliver to the customers that are paying for them. Agile managers also realize that stale software is very costly. They know that keeping the technology in their software current is much less expensive and risky than large rewrites that occur infrequently and schedule time in each release for refactoring of the existing software. Agile Executives Even though Agile is a better way, I’ve still seen failures using the Agile process. While some of these failures can be attributed to the team, most of them are caused by managers, not the team. Managers fail to understand what Agile is, how it works, and how to get the information that they need to make good business decisions. I think this is a shame. I’m very pleased that Veracity understands this problem and is trying to do something about it. Veracity is a key sponsor of Agile Executives. In fact, Galen is this year’s acting president for Agile Executives. The purpose of Agile Executives is to help managers better manage Agile teams and see better success. Agile Executives is trying to build a community of executives that range from managers interested in Agile to managers that have successfully adopted Agile. Together, these managers can form a community of support and ideas that will help make Agile teams more successful. Helping Your Team You can help too! Talk with your manager and get them involved in Agile Executives. Help Veracity build the community. If your manager understands Agile better, he’ll understand how to help his teams, which will result in software that adds more value for customers. If you have any questions about how you can be involved, please let me know. Technorati Tags: Agile,Agile Executives

    Read the article

  • Five development tools I can't live without

    - by bconlon
    When applying to join Geeks with Blogs I had to specify the development tools I use every day. That got me thinking, it's taken a long time to whittle my tools of choice down to the selection I use, so it might be worth sharing. Before I begin, I appreciate we all have our preferred development tools, but these are the ones that work for me. Microsoft Visual Studio Microsoft Visual Studio has been my development tool of choice for more years than I care to remember. I first used this when it was Visual C++ 1.5 (hats off to those who started on 1.0) and by 2.2 it had everything I needed from a C++ IDE. Versions 4 and 5 followed and if I had to guess I would expect more Windows applications are written in VC++ 6 and VB6 than any other language. Then came the not so great versions Visual Studio .Net 2002 (7.0) and 2003 (7.1). If I'm honest I was still using v6. 2005 was better and 2008 was simply brilliant. Everything worked, the compiler was super fast and I was happy again...then came 2010...oh dear. 2010 is a big step backwards for me. It's not encouraging for my upcoming WPF exploits that 2010 is fronted in WPF technology, with the forever growing Find/Replace dialog, the issues with C++ intellisense, and the buggy debugger. That said it is still my tool of choice but I hope they sort the issue in SP1. I've tried other IDEs like Visual Age and Eclipse, but for me Visual Studio is the best. A really great tool. Liquid XML Studio XML development is a tricky business. The W3C standards are often difficult to get to the bottom of so it's great to have a graphical tool to help. I first used Liquid Technologies 5 or 6 years back when I needed to process XML data in C++. Their excellent XML Data Binding tool has an easy to use Wizard UI (as compared to Castor or JAXB command line tools) and allows you to generate code from an XML Schema. So instead of having to deal with untyped nodes like with a DOM parser, instead you get an Object Model providing a custom API in C++, C#, VB etc. More recently they developed a graphical XML IDE with XML Editor, XSLT, XQuery debugger and other XML tools. So now I can develop an XML Schema graphically, click a button to generate a Sample XML document, and click another button to run the Wizard to generate code including a Sample Application that will then load my Sample XML document into the generated object model. This is a very cool toolset. Note: XML Data Binding is nothing to do with WPF Data Binding, but I hope to cover both in more detail another time. .Net Reflector Note: I've just noticed that starting form the end of February 2011 this will no longer be a free tool !! .Net Reflector turns .Net byte code back into C# source code. But how can it work this magic? Well the clue is in the name, it uses reflection to inspect a compiled .Net assembly. The assembly is compiled to byte code, it doesn't get compiled to native machine code until its needed using a just-in-time (JIT) compiler. The byte code still has all of the information needed to see classes, variables. methods and properties, so reflector gathers this information and puts it in a handy tree. I have used .Net Reflector for years in order to understand what the .Net Framework is doing as it sometimes has undocumented, quirky features. This really has been invaluable in certain instances and I cannot praise enough kudos on the original developer Lutz Roeder. Smart Assembly In order to stop nosy geeks looking at our code using a tool like .Net Reflector, we need to obfuscate (mess up) the byte code. Smart Assembly is a tool that does this. Again I have used this for a long time. It is very quick and easy to use. Another excellent tool. Coincidentally, .Net Reflector and Smart Assembly are now both owned by Red Gate. Again kudos goes to the original developer Jean-Sebastien Lange. TortoiseSVN SVN (Apache Subversion) is a Source Control System developed as an open source project. TortoiseSVN is a graphical UI wrapper over SVN that hooks into Windows Explorer to enable files to be Updated, Committed, Merged etc. from the right click menu. This is an essential tool for keeping my hard work safe! Many years ago I used Microsoft Source Safe and I disliked CVS type systems. But TortoiseSVN is simply the best source control tool I have ever used. --- So there you have it, my top 5 development tools that I use (nearly) every day and have helped to make my working life a little easier. I'm sure there are other great tools that I wish I used but have never heard of, but if you have not used any of the above, I would suggest you check them out as they are all very, very cool products. #

    Read the article

  • Maximize Performance and Availability with Oracle Data Integration

    - by Tanu Sood
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-fareast-font-family:Calibri; mso-bidi-font-family:"Times New Roman";} Alert: Oracle is hosting the 12c Launch Webcast for Oracle Data Integration and Oracle Golden Gate on Tuesday, November 12 (tomorrow) to discuss the new capabilities in detail and share customer perspectives. Hear directly from customer experts and executives from SolarWorld Industries America, British Telecom and Rittman Mead and get your questions answered live by product experts. Register for this complimentary webcast today and join in the discussion tomorrow. Author: Irem Radzik, Senior Principal Product Director, Oracle Organizations that want to use IT as a strategic point of differentiation prefer Oracle’s complete application offering to drive better business performance and optimize their IT investments. These enterprise applications are in the center of business operations and they contain critical data that needs to be accessed continuously, as well as analyzed and acted upon in a timely manner. These systems also need to operate with high-performance and availability, which means analytical functions should not degrade applications performance, and even system maintenance and upgrades should not interrupt availability. Oracle’s data integration products, Oracle Data Integrator, Oracle GoldenGate, and Oracle Enterprise Data Quality, provide the core foundation for bringing data from various business-critical systems to gain a broader, unified view. As a more advance offering to 3rd party products, Oracle’s data integration products facilitate real-time reporting for Oracle Applications without impacting application performance, and provide ability to upgrade and maintain the system without taking downtime. Oracle GoldenGate is certified for Oracle Applications, including E-Business Suite, Siebel CRM, PeopleSoft, and JD Edwards, for moving transactional data in real-time to a dedicated operational reporting environment. This solution allows the app users to offload the resource-heavy queries to the reporting instance(s), reducing CPU utilization, improving OLTP performance, and extending the lifetime of existing IT assets. In addition, having a dedicated reporting instance with up-to-the-second transactional data allows optimizing the reporting environment and even decreasing costs as GoldenGate can move only the required data from expensive mainframe environments to cost-efficient open system platforms.  With real-time data replication capabilities GoldenGate is also certified to enable application upgrades and database/hardware/OS migration without impacting business operations. GoldenGate is certified for Siebel CRM, Communications Billing and Revenue Management and JD Edwards for supporting zero downtime upgrades to the latest app version. GoldenGate synchronizes a parallel, upgraded system with the old version in real time, thus enables continuous operations during the process. Oracle GoldenGate is also certified for minimal downtime database migrations for Oracle E-Business Suite and other key applications. GoldenGate’s solution also minimizes the risk by offering a failback option after the switchover to the new environment. Furthermore, Oracle GoldenGate’s bidirectional active-active data replication is certified for Oracle ATG Web Commerce to enable geographically load balancing and high availability for ATG customers. For enabling better business insight, Oracle Data Integration products power Oracle BI Applications with high performance bulk and real-time data integration. Oracle Data Integrator (ODI) is embedded in Oracle BI Applications version 11.1.1.7.1 and helps to integrate data end-to-end across the full BI Applications architecture, supporting capabilities such as data-lineage, which helps business users identify report-to-source capabilities. ODI is integrated with Oracle GoldenGate and provides Oracle BI Applications customers the option to use real-time transactional data in analytics, and do so non-intrusively. By using Oracle GoldenGate with the latest release of Oracle BI Applications, organizations not only leverage fresh data in analytics, but also eliminate the need for an ETL batch window and minimize the impact on OLTP systems. You can learn more about Oracle Data Integration products latest 12c version in our upcoming launch webcast and access the app-specific free resources in the new Data Integration for Oracle Applications Resource Center.

    Read the article

  • What Can We Learn About Software Security by Going to the Gym

    - by Nick Harrison
    There was a recent rash of car break-ins at the gym. Not an epidemic by any stretch, probably 4 or 5, but still... My gym used to allow you to hang your keys from a peg board at the front desk. This way you could come to the gym dressed to work out, lock your valuables in your car, and not have anything to worry about. Ignorance is bliss. The problem was that anyone who wanted to could go pick up your car keys, click the unlock button and find your car. Once there, they could rummage through your stuff and then walk back in and finish their workout as if nothing had happened. The people doing this were a little smatter then the average thief and would swipe some but not all of your cash leaving everything else in place. Most thieves would steal the whole car and be busted more quickly. The victims were unaware that anything had happened for several days. Fortunately, once the victims realized what had happened, the gym was still able to pull security tapes and find out who was misbehaving. All of the bad guys were busted, and everyone can now breathe a sigh of relieve. It is once again safe to go to the gym. Except there was still a fundamental problem. Putting your keys on a peg board by the front door is just asking for bad things to happen. One person got busted exploiting this security flaw. Others can still be exploiting it. In fact, others may well have been exploiting it and simply never got caught. How long would it take you to realize that $10 was missing from your wallet, if everything else was there? How would you even know when it went missing? Would you go to the front desk and even bother to ask them to review security tapes if you were only missing a small amount. Once highlighted, it is easy to see how commonly such vulnerability may have been exploited. So the gym did the very reasonable precaution of removing the peg board. To me the most shocking part of this story is the resulting uproar from gym members losing the convenient key peg. How dare they remove the trusted peg board? How can I work out now, I have to carry my keys from machine to machine? How can I enjoy my workout with this added inconvenience? This all happened a couple of weeks ago, and some people are still complaining. In light of the recent high profile hacking, there are a couple of parallels that can be drawn. Many web sites are riddled with vulnerabilities are crazy and easily exploitable as leaving your car keys by the front door while you work out. No one ever considered thanking the people who were swiping these keys for pointing out the vulnerability. Without a hesitation, they had their gym memberships revoked and are awaiting prosecution. The gym did recognize the vulnerability for what it is, and closed up that attack vector. What can we learn from this? Monitoring and logging will not prevent a crime but they will allow us to identify that a crime took place and may help track down who did it. Once we find a security weakness, we need to eliminate it. We may never identify and eliminate all security weaknesses, but we cannot allow well known vulnerabilities to persist in our system. In our case, we are not likely to meet resistance from end users. We are more likely to meet resistance from stake holders, product owners, keeper of schedules and budgets. We may meet resistance from integration partners, co workers, and third party vendors. Regardless of the source, we will see resistance, but the weakness needs to be dealt with. There is no need to glorify a cracker for bringing to light a security weakness. Regardless of their claimed motives, they are not heroes. There is also no point in wasting time defending weaknesses once they are identified. Deal with the weakness and move on. In may be embarrassing to find security weaknesses in our systems, but it is even more embarrassing to continue ignoring them. Even if it is unpopular, we need to seek out security weaknesses and eliminate them when we find them. http://www.sans.org has put together the Common Weakness Enumeration http://cwe.mitre.org/ which lists out common weaknesses. The site navigation takes a little getting used to, but there is a treasure trove here. Here is the detail page for SQL Injection. It clearly states how this can be exploited, in case anyone doubts that the weakness should be taken seriously, and more importantly how to mitigate the risk.

    Read the article

  • How Important is Project Team Communication in the Public Sector?

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Paul Bender, Director of Public Administration Strategy, Oracle Primavera It goes without saying that communication between project team members is a core competency that connects every member of a project team to a common set of strategies, goals and actions. If these components are not effectively shared by project leads and understood by stakeholders, project outcomes can be jeopardized and budgets may incur unnecessary risk. As reported by PMI’s 2013 Pulse of the Profession, an organization’s ability to meet project timelines, budgets and especially goals significantly impacts its ability to survive—and even thrive. The Pulse study revealed that the most crucial success factor in project management is effective communication to all stakeholders—a critical core competency for public agencies. PMI’s 2013 Pulse of the Profession report revealed that US$135 million is at risk for every US$1 billion spent on a project. Further research on the importance of effective project team communication uncovers that a startling 56 percent (US$75 million of that US$135 million) is at risk due to ineffective communication. Simply stated: public agencies cannot execute strategic initiatives unless they can effectively communicate their strategic alignment and business benefits. Executives and project managers around the world agree that poor communication between project team members contributes to project failure. A Forbes Insights 2010 Strategic Initiatives Study “Adapting Corporate Strategy to the Changing Economy,” found that nine out of ten CEOs believe that communication is critical to the success of their strategic initiatives, and nearly half of respondents cite communication as an integral and active component of their strategic planning and execution process. Project managers see it similarly from their side as well. According to PMI’s Pulse research, 55 percent of project managers agree that effective communication to all stakeholders is the most critical success factor in project management. As we all know, not all projects succeed. On average, two in five projects do not meet their original goals and business intent, and one-half of those unsuccessful projects are related to ineffective communication. Results reveal that while all aspects of project communication can be challenging to public agencies, the biggest problem areas are: A gap in understanding the business benefits. Challenges surrounding the language used to deliver project-related information, which is often unclear and peppered with project management jargon. Public agencies -- federal, state, and local -- have difficulty communicating with the appropriate levels with clarity and detail. This difficulty is likely exacerbated by the divide between each key audience and its understanding of project-specific, technical language. For those involved in public sector project and portfolio management, I would be interested to hear your thoughts and please visit Primavera EPPM solutions for public sector.

    Read the article

  • Windows for IoT, continued

    - by Valter Minute
    Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

    Read the article

  • How is the gimbal locked problem solved using accumulative matrix transformations

    - by Luke San Antonio
    I am reading the online "Learning Modern 3D Graphics Programming" book by Jason L. McKesson As of now, I am up to the gimbal lock problem and how to solve it using quaternions. However right here, at the Quaternions page. Part of the problem is that we are trying to store an orientation as a series of 3 accumulated axial rotations. Orientations are orientations, not rotations. And orientations are certainly not a series of rotations. So we need to treat the orientation of the ship as an orientation, as a specific quantity. I guess this is the first spot I start to get confused, the reason is because I don't see the dramatic difference between orientations and rotations. I also don't understand why an orientation cannot be represented by a series of rotations... Also: The first thought towards this end would be to keep the orientation as a matrix. When the time comes to modify the orientation, we simply apply a transformation to this matrix, storing the result as the new current orientation. This means that every yaw, pitch, and roll applied to the current orientation will be relative to that current orientation. Which is precisely what we need. If the user applies a positive yaw, you want that yaw to rotate them relative to where they are current pointing, not relative to some fixed coordinate system. The concept, I understand, however I don't understand how if accumulating matrix transformations is a solution to this problem, how the code given in the previous page isn't just that. Here's the code: void display() { glClearColor(0.0f, 0.0f, 0.0f, 0.0f); glClearDepth(1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glutil::MatrixStack currMatrix; currMatrix.Translate(glm::vec3(0.0f, 0.0f, -200.0f)); currMatrix.RotateX(g_angles.fAngleX); DrawGimbal(currMatrix, GIMBAL_X_AXIS, glm::vec4(0.4f, 0.4f, 1.0f, 1.0f)); currMatrix.RotateY(g_angles.fAngleY); DrawGimbal(currMatrix, GIMBAL_Y_AXIS, glm::vec4(0.0f, 1.0f, 0.0f, 1.0f)); currMatrix.RotateZ(g_angles.fAngleZ); DrawGimbal(currMatrix, GIMBAL_Z_AXIS, glm::vec4(1.0f, 0.3f, 0.3f, 1.0f)); glUseProgram(theProgram); currMatrix.Scale(3.0, 3.0, 3.0); currMatrix.RotateX(-90); //Set the base color for this object. glUniform4f(baseColorUnif, 1.0, 1.0, 1.0, 1.0); glUniformMatrix4fv(modelToCameraMatrixUnif, 1, GL_FALSE, glm::value_ptr(currMatrix.Top())); g_pObject->Render("tint"); glUseProgram(0); glutSwapBuffers(); } To my understanding, isn't what he is doing (modifying a matrix on a stack) considered accumulating matrices, since the author combined all the individual rotation transformations into one matrix which is being stored on the top of the stack. My understanding of a matrix is that they are used to take a point which is relative to an origin (let's say... the model), and make it relative to another origin (the camera). I'm pretty sure this is a safe definition, however I feel like there is something missing which is blocking me from understanding this gimbal lock problem. One thing that doesn't make sense to me is: If a matrix determines the difference relative between two "spaces," how come a rotation around the Y axis for, let's say, roll, doesn't put the point in "roll space" which can then be transformed once again in relation to this roll... In other words shouldn't any further transformations to this point be in relation to this new "roll space" and therefore not have the rotation be relative to the previous "model space" which is causing the gimbal lock. That's why gimbal lock occurs right? It's because we are rotating the object around set X, Y, and Z axes rather than rotating the object around it's own, relative axes. Or am I wrong? Since apparently this code I linked in isn't an accumulation of matrix transformations can you please give an example of a solution using this method. So in summary: What is the difference between a rotation and an orientation? Why is the code linked in not an example of accumulation of matrix transformations? What is the real, specific purpose of a matrix, if I had it wrong? How could a solution to the gimbal lock problem be implemented using accumulation of matrix transformations? Also, as a bonus: Why are the transformations after the rotation still relative to "model space?" Another bonus: Am I wrong in the assumption that after a transformation, further transformations will occur relative to the current? Also, if it wasn't implied, I am using OpenGL, GLSL, C++, and GLM, so examples and explanations in terms of these are greatly appreciated, if not necessary. The more the detail the better! Thanks in advance...

    Read the article

  • C#/.NET Little Wonders: Getting Caller Information

    - by James Michael Hare
    Originally posted on: http://geekswithblogs.net/BlackRabbitCoder/archive/2013/07/25/c.net-little-wonders-getting-caller-information.aspx Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. There are times when it is desirable to know who called the method or property you are currently executing.  Some applications of this could include logging libraries, or possibly even something more advanced that may server up different objects depending on who called the method. In the past, we mostly relied on the System.Diagnostics namespace and its classes such as StackTrace and StackFrame to see who our caller was, but now in C# 5, we can also get much of this data at compile-time. Determining the caller using the stack One of the ways of doing this is to examine the call stack.  The classes that allow you to examine the call stack have been around for a long time and can give you a very deep view of the calling chain all the way back to the beginning for the thread that has called you. You can get caller information by either instantiating the StackTrace class (which will give you the complete stack trace, much like you see when an exception is generated), or by using StackFrame which gets a single frame of the stack trace.  Both involve examining the call stack, which is a non-trivial task, so care should be done not to do this in a performance-intensive situation. For our simple example let's say we are going to recreate the wheel and construct our own logging framework.  Perhaps we wish to create a simple method Log which will log the string-ified form of an object and some information about the caller.  We could easily do this as follows: 1: static void Log(object message) 2: { 3: // frame 1, true for source info 4: StackFrame frame = new StackFrame(1, true); 5: var method = frame.GetMethod(); 6: var fileName = frame.GetFileName(); 7: var lineNumber = frame.GetFileLineNumber(); 8: 9: // we'll just use a simple Console write for now 10: Console.WriteLine("{0}({1}):{2} - {3}", 11: fileName, lineNumber, method.Name, message); 12: } So, what we are doing here is grabbing the 2nd stack frame (the 1st is our current method) using a 2nd argument of true to specify we want source information (if available) and then taking the information from the frame.  This works fine, and if we tested it out by calling from a file such as this: 1: // File c:\projects\test\CallerInfo\CallerInfo.cs 2:  3: public class CallerInfo 4: { 5: Log("Hello Logger!"); 6: } We'd see this: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! This works well, and in fact CallStack and StackFrame are still the best ways to examine deeper into the call stack.  But if you only want to get information on the caller of your method, there is another option… Determining the caller at compile-time In C# 5 (.NET 4.5) they added some attributes that can be supplied to optional parameters on a method to receive caller information.  These attributes can only be applied to methods with optional parameters with explicit defaults.  Then, as the compiler determines who is calling your method with these attributes, it will fill in the values at compile-time. These are the currently supported attributes available in the  System.Runtime.CompilerServices namespace": CallerFilePathAttribute – The path and name of the file that is calling your method. CallerLineNumberAttribute – The line number in the file where your method is being called. CallerMemberName – The member that is calling your method. So let’s take a look at how our Log method would look using these attributes instead: 1: static int Log(object message, 2: [CallerMemberName] string memberName = "", 3: [CallerFilePath] string fileName = "", 4: [CallerLineNumber] int lineNumber = 0) 5: { 6: // we'll just use a simple Console write for now 7: Console.WriteLine("{0}({1}):{2} - {3}", 8: fileName, lineNumber, memberName, message); 9: } Again, calling this from our sample Main would give us the same result: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! However, though this seems the same, there are a few key differences. First of all, there are only 3 supported attributes (at this time) that give you the file path, line number, and calling member.  Thus, it does not give you as rich of detail as a StackFrame (which can give you the calling type as well and deeper frames, for example).  Also, these are supported through optional parameters, which means we could call our new Log method like this: 1: // They're defaults, why not fill 'em in 2: Log("My message.", "Some member", "Some file", -13); In addition, since these attributes require optional parameters, they cannot be used in properties, only in methods. These caveats aside, they do let you get similar information inside of methods at a much greater speed!  How much greater?  Well lets crank through 1,000,000 iterations of each.  instead of logging to console, I’ll return the formatted string length of each.  Doing this, we get: 1: Time for 1,000,000 iterations with StackTrace: 5096 ms 2: Time for 1,000,000 iterations with Attributes: 196 ms So you see, using the attributes is much, much faster!  Nearly 25x faster in fact.  Summary There are a few ways to get caller information for a method.  The StackFrame allows you to get a comprehensive set of information spanning the whole call stack, but at a heavier cost.  On the other hand, the attributes allow you to quickly get at caller information baked in at compile-time, but to do so you need to create optional parameters in your methods to support it. Technorati Tags: Little Wonders,CSharp,C#,.NET,StackFrame,CallStack,CallerFilePathAttribute,CallerLineNumberAttribute,CallerMemberName

    Read the article

  • NDepend Evaluation: Part 3

    - by Anthony Trudeau
    NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high code quality. NDepend uses a number of metrics and aggregates the data in pleasing static and active visual reports. My evaluation of NDepend will be broken up into several different parts. In the first part of the evaluation I looked at installing the add-in.  And in the last part I went over my first impressions including an overview of the features.  In this installment I provide a little more detail on a few of the features that I really like. Dependency Matrix The dependency matrix is one of the rich visual components provided with NDepend.  At a glance it lets you know where you have coupling problems including cycles.  It does this with number indicating the weight of the dependency and a color-coding that indicates the nature of the dependency. Green and blue cells are direct dependencies (with the difference being whether the relationship is from row-to-column or column-to-row).  Black cells are the ones that you really want to know about.  These indicate that you have a cycle.  That is, type A refers to type B and type B also refers to Type A. But, that’s not the end of the story.  A handy pop-up appears when you hover over the cell in question.  It explains the color, the dependency, and provides several interesting links that will teach you more than you want to know about the dependency. You can double-click the problem cells to explode the dependency.  That will show the dependencies on a method-by-method basis allowing you to more easily target and fix the problem.  When you’re done you can click the back button on the toolbar. Dependency Graph The dependency graph is another component provided.  It’s complementary to the dependency matrix, but it isn’t as easy to identify dependency issues using the window. On a positive note, it does provide more information than the matrix. My biggest issue with the dependency graph is determining what is shown.  This was not readily obvious.  I ended up using the navigation buttons to get an acceptable view.  I would have liked to choose what I see. Once you see the types you want you can get a decent idea of coupling strength based on the width of the dependency lines.  Double-arrowed lines are problematic and are shown in red.  The size of the boxes will be related to the metric being displayed.  This is controlled using the Box Size drop-down in the toolbar.  Personally, I don’t find the size of the box to be helpful, so I change it to Constant Font. One nice thing about the display is that you can see the entire path of dependencies when you hover over a type.  This is done by color-coding the dependencies and dependants.  It would be nice if selecting the box for the type would lock the highlighting in place. I did find a perhaps unintended work-around to the color-coding.  You can lock the color-coding in by hovering over the type, right-clicking, and then clicking on the canvas area to clear the pop-up menu.  You can then do whatever with it including saving it to an image file with the color-coding. CQL NDepend uses a code query language (CQL) to work with your code just like it was a database.  CQL cannot be confused with the robustness of T-SQL or even LINQ, but it represents an impressive attempt at providing an expressive way to enumerate and interrogate your code. There are two main windows you’ll use when working with CQL.  The CQL Query Explorer allows you to define what queries (rules) are run as part of a report – I immediately unselected rules that I don’t want in my results.  The CQL Query Edit window is where you can view or author your own rules.  The explorer window is pretty self-explanatory, so I won’t mention it further other than to say that any queries you author will appear in the custom group. Authoring your own queries is really hard to screw-up.  The Intellisense-like pop-ups tell you what you can do while making composition easy.  I was able to create a query within two minutes of playing with the editor.  My query warns if any types that are interfaces don’t start with an “I”. WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” The results from the CQL Query Edit window are immediate. That fact makes it useful for ad hoc querying.  It’s worth mentioning two things that could make the experience smoother.  First, out of habit from using Visual Studio I expect to be able to scroll and press Tab to select an item in the list (like Intellisense).  You have to press Enter when you scroll to the item you want.  Second, the commands are case-sensitive.  I don’t see a really good reason to enforce that. CQL has a lot of potential not just in enforcing code quality, but also enforcing architectural constraints that your enterprise has defined. Up Next My next update will be the final part of the evaluation.  I will summarize my experience and provide my conclusions on the NDepend add-in. ** View Part 1 of the Evaluation ** ** View Part 2 of the Evaluation ** Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend.

    Read the article

  • jQuery Templates, Data Link

    - by Renso
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Query Templates, Data Link, and Globalization I am sure you must have read Scott Guthrie’s blog post about jQuery support and officially supporting jQuery's templating, data linking and globalization, if not here it is: jQuery Templating Since we are an open source shop and use jQuery and jQuery plugins extensively to say the least, decided to look into the templating a bit and see what data linking is all about. For those not familiar with those terms here is the summary, plenty of material out there on what it is, but here is what in my experience it means: jQuery Templating: A templating engine that allows you to specify a client-side template where you indicate which properties/tags you want dynamically updated. You in a sense specify which parts of the html is dynamic and since it is pluggable you are able to use tools data jQuery data linking and others to let it sync up your template with data. What makes it more powerful is that you can easily work with rows of data, adding and removing rows. Once the template has been generated, which you do dynamically on a client-side event, you then append/inject the resulting template somewhere in your DOM, like for example you would get a JSON object from the database, map it to your template, it populates the template with your data in the indicated places, and then let’s say for example append it to a row in a table. I have not found it that useful for lets say a single record of data since you could easily just get a partial view from the server via an html type ajax call. It really shines when you dynamically add/remove rows from a list in the DOM. I have not found an alternative that meets the functionality of the jQuery template and helps of course that Microsoft officially supports it. In future versions of the jQuery plug-in it may even ship as part of the standard jQuery library and with future versions of Visual Studio. jQuery Data Linking: In short I was fascinated by it initially by how with one line of code I can sync up my JSON object with my form elements. That's where my enthusiasm stopped. It was one-line to let is deal with syncing up your form with your JSON object, but it is not bidirectional as they state and I tried all the work arounds they suggested and none of them work. The problem is that when you update your JSON object it DOES NOT sync it up with your form. In an example, accounts are being edited client side by selecting the account from a list by clicking on the row, it then fetches the entire account JSON object via ajax json-type call and then refreshes the form with the account’s details from the new JSON object. What is the use of syncing up my JSON with the form if I still have to programmatically sync up my new JSON object with each DOM property?! So you may ask: “what is the alternative”? Good question and the same one I was pondering, maybe I can just use it for keeping my from n sync with my JSON object so I can post that JSON object back to the server and update my database. That’s when I discovered Knockout: Knockout It addresses the issues mentioned above and also supports event handling through the observer pattern. Not wanting to go into detail here, Steve Sanderson, the creator of Knockout, has already done a terrific job of that, thanks Steve for a great plug-in! Best of all it integrates perfectly with the jQuery Templating engine as well. I have not found an alternative to this plugin that supports the depth and width of functionality and would recommend it to anyone. The only drawback is the embedded html attributes (data-bind=””) tags that you have to add to the HTML, in my opinion tying your behavior to your HTML, where I like to separate behavior from HTML as well as CSS, so the HTML is purely to define content, not styling or behavior. But there are plusses to this as well and also a nifty work around to this that I will just shortly mention here with an example. Instead of data binding an html tag with knockout event handling like so:  <%=Html.TextBox("PrepayDiscount", String.Empty, new { @class = "number" })%>   Do: <%=Html.DataBoundTextBox("PrepayDiscount", String.Empty, new { @class = "number" })%>   The html extension above then takes care of the internals and you could then swap Knockout for something else if you want to inside the extension and keep the HTML plugin agnostic. Here is what the extension looks like, you can easily build a whole library to support all kinds of data binding options from this:      public static class HtmlExtensions       {         public static MvcHtmlString DataBoundTextBox(this HtmlHelper helper, string name, object value, object htmlAttributes)         {             var dic = new RouteValueDictionary(htmlAttributes);             dic.Add("data-bind", String.Format("value: {0}", name));             return helper.TextBox(name, value, dic);         }       }   Hope this helps in making a decision when and where to consider jQuery templating, data linking and Knockout.

    Read the article

  • Webcor Builders Coordinates Construction Schedules and Mitigates Potential Delays More Efficiently with Integrated Project Management

    - by Sylvie MacKenzie, PMP
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} With more than 40 years of commercial construction experience, Webcor Builders is a leading builder of distinguished, high-profile projects, including high-rise condominiums and hotels, laboratories, healthcare centers, and public works projects. Webcor is also known for its award-winning concrete, interior construction, historic restoration, and seismic renovation work. The company has completed more than 50 million square feet of projects to date. Considering the variety and complexity of the construction projects Webcor undertakes, an integrated project management solution is critical to ensuring optimal efficiency and completing client projects on time and on budget. The company previously used a number of scheduling systems for its various building projects. These packages provided different levels of schedule detail and required schedulers, engineers, and other employees to learn multiple systems. From an IT cost and complexity perspective, the company had to manage multiple scheduling systems and pay for multiple sets of licenses. The company looked to standardize on an enterprise project management system, and selected Oracle’s Primavera P6 Enterprise Project Portfolio Management. Webcor uses the solution’s advanced capabilities to schedule complex projects, analyze delays, model and propose multiple scenarios to demonstrate and mitigate delays and cost overruns, and process that information efficiently to deliver the scheduling precision that public and private projects require. In fact, the solution was instrumental in helping the company’s expansion into public sector projects during the recent economic downturn, and with Primavera P6 in place, it can deliver the precise schedule reporting required for large public projects. With Primavera P6 in place, the company could deliver the precise scheduling and milestone reporting capabilities required for large public projects. The solution is in managing the high-profile University of California – Berkeley Memorial Stadium project. Webcor was hired as construction manager and general contractor for the stadium renovation project, which is a fast-paced project located near the seismically active Hayward Fault Zone. Due to the University of California’s football schedule, meeting the Universities deadline for the coming season placed Webcor in a situation where risk awareness and early warnings of issues would be paramount. Webcor and the extended project team needed a solution that could instantly analyze alternate scenarios to mitigate potential delays; Primavera would deliver those answers.The team would also need to enable multiple stakeholders to use an internet-based platform to access the schedule from various locations, and model complicated sequencing requirements where swift decisions would be made to keep the project on track. The schedule is an integral part of Webcor’s construction management process for the stadium project. Rather than providing the client with the industry-standard monthly update, Webcor updates the critical path method (CPM) schedule on a weekly basis. The project team also reviews the schedule and updates weekly to confirm that progress and forecasted performance are accurate. Hired by the University for their ability to deliver in high risk environments The Webcor team was hit recently with a design supplement that could have added up to 70 days to the project. Using Oracle Primavera P6 the team sprung into action analyzing multiple “what if” scenarios to review mitigation means and methods.  Determined to make sure the Bears could take the field in the coming season the project team nearly eliminated the impact with their creative analysis in working the schedule. The total time from the issuance of the final design supplement to an agreed mitigation response was less than one week; leveraging the Oracle Primavera solution Webcor was able to deliver superior customer value With the ability to efficiently manage projects and schedules, Webcor can ensure it completes its projects on time and on budget, as well as inform clients about what changes to plans will mean in terms of delays and additional costs. Read the complete customer case study at :  http://www.oracle.com/us/corporate/customers/customersearch/webcor-builders-1-primavera-ss-1639886.html

    Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >