Search Results

Search found 2728 results on 110 pages for 'volume'.

Page 102/110 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• Tracking down rogue disk usage

  - by Amadan

  I found several other questions regarding the theory behind my problem (e.g. this, this), but I don't know how to apply the answers to my machine. # du -hsx / 11000283 / # df -kT / Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/mapper/csisv13-root ext4 516032952 361387456 128432532 74% / There is a big difference between 11G (du) and 345G (df). Where are the remaining 334G? It's not in deleted files. There was only one, it was short, and I truncated it just in case. This is what remains: # lsof -a +L1 / COMMAND PID USER FD TYPE DEVICE SIZE/OFF NLINK NODE NAME zabbix_ag 4902 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4902 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) I rebooted to see if fsck does anything. But, from /var/log/boot.log, it seems there are no issues: /dev/mapper/server-root: clean, 3936097/32768000 files, 125368568/131064832 blocks Thinking maybe someone overzealously reserved root space, I checked the master record: # tune2fs -l /dev/mapper/server-root tune2fs 1.42 (29-Nov-2011) Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 86430ade-cea7-46ce-979c-41769a41ecbe Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131064832 Reserved block count: 6553241 Free blocks: 5696264 Free inodes: 28831903 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Feb 1 13:44:04 2013 Last mount time: Tue Aug 19 16:56:13 2014 Last write time: Fri Feb 1 13:51:28 2013 Mount count: 9 Maximum mount count: -1 Last checked: Fri Feb 1 13:44:04 2013 Check interval: 0 (<none>) Lifetime writes: 1215 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28836028 Default directory hash: half_md4 Directory Hash Seed: bca55ff5-f530-48d1-8347-25c004f66d43 Journal backup: inode blocks The system is: # uname -a Linux server 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Does anyone have any tips on what exactly to do to find and hopefully reclaim the missing space?

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• Windows XP machine not seeing external FAT32 partitions correctly

  - by Rob_before_edits

  About 8 months ago my Windows XP machine stopped being able to see FAT32 external drives when I plug them in... mostly. I will explain... It happens with all my FAT32 drives, whether they be unpowered external hard drives, powered external hard drives, SDHC cards plugged directly into the machine's card reader, or SDHC cards plugged in via a separate USB card reader. All of these drives/cards used to work fine on this machine. They all stopped working at about the same time. NTFS volumes are not affected. If I plug in NTFS external drives they are recognized right away. I even have one external drive with two partitions on it, one is NTFS which is recognized, the other is FAT32, which is not recognized. If I attach a FAT32 drive, then reboot, then the drive almost always becomes visible to the machine after the reboot. Sometimes I can plug in a FAT32 drive and it works right away. Not often though. I'd say I get lucky more often with SDHC cards than hard drives. I'm developing a theory that I only get lucky with hard drives if I'm running Acronis Disk Director when I plug them in, though that usually doesn't work either - I need more data here, this may be a red herring. Getting lucky with a hard drive is really rare, usually I have to reboot. When a FAT32 is recognized, either because I got lucky or because I rebooted, I can almost never safely disconnect it. It tells me "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later". I can't seem to get around this. IIRC, I've tried closing every open window, and still no luck. Since I care about my data usually the only way to disconnect a FAT32 drive is to shut down the machine. As you can imagine, two reboots just to read a drive is getting pretty old... When the machine fails to see a FAT32 drive it usually comes up with the appropriate drive letter and the words "Local Disk" in Windows Explorer instead of the correct partition name. If I click on it I get "J:\ is not accessible. The parameter is incorrect." Before this problem arose I always clicked the "safely remove" button for everything, including SDHC cards where I think it's not necessary. I've known for a long time that this is the correct procedure for hard drives, so I don't think failing to do this was the cause of this problem (before someone asks :) Any answers or suggestions most welcome.

  Read the article

• Are FC and SAS DAS devices standard enough?

  - by user222182

  Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

  Read the article

• Linux Fiber Channel Host Setup Basic

  - by Jim

  I've been googling for about 4 hours now with no luck. I am trying to setup a Linux server running Oracle Server 6.3 as a Fiber Channel host. And then connect it to a Dell Compellent Fibre Channel Host contain a 500GB Volume. The Oracle server itself contains two Brocade 815 FC HBAs. I've discovered their WWN(I think) via cat /sys/class/fc_host/host1/port_name 0x100000051efc3d85 cat /sys/class/fc_host/host2/port_name 0x100000051efc3d9f The next part is where I am at a loss. I've used iSCSI before...is FC the same deal where you have an initiator and a target? If so where do I specific that in linux? I'm also new to Fiber Channel as a protocol, so i am unsure what is needed to make a transaction? WWN and port ID? Similar to IP:Port combination in the Ethernet world. I've read alot regarding using systool, multipath, fc_transport commands, however none of these is recognized as a valid command from Oracle Server 6.3 Appreciate the guidance and assistance. I installed sccsi-target-utils and can now run rescan-scsi-bus and sg_map -x. rescan-scsi-bus.sh -l -w -r Host adapter 0 (megaraid_sas) found. Host adapter 1 ((null)) found. Host adapter 2 ((null)) found. Host adapter 3 (ata_piix) found. Host adapter 4 (ata_piix) found. Scanning SCSI subsystem for new devices and remove devices that have disappeared Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, LUNs 0 1 2 3 4 5 6 7 Scanning for device 0 2 0 0 .... OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 0 2 1 0 ... OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 1 0 3 1 ... OLD: Host: scsi1 Channel: 00 Id: 03 Lun: 01 Vendor: COMPELNT Model: Compellent Vol Rev: 0505 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 2 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning host 3 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 3 0 0 0 ... REM: Host: scsi3 Channel: 00 Id: 00 Lun: 00 DEL: Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A Type: CD-ROM ANSI SCSI revision: 05 Scanning host 4 channels 0 for SCSI target IDs 0, LUNs 0 1 2 3 4 5 6 7 0 new device(s) found. 1 device(s) removed. and sg_map -x /dev/sg0 0 0 32 0 13 /dev/sg1 0 2 0 0 0 /dev/sda /dev/sg2 0 2 1 0 0 /dev/sdb /dev/sg4 1 0 3 1 0 /dev/sdc I'm not sure what this all means...

  Read the article

• Converting an EC2 AMI to vmdk image

  - by Reed G. Law

  I've come quite close to getting Amazon Linux to boot inside VirtualBox, thanks to this answer and these websites. A quick overview of the steps I've taken: Launch EC2 instance with Amazon Linux 2011.09 64-bit AMI dd the contents of the EBS volume over ssh to a local image file. Mount the image file as a loopback device and then to a local mount point. Create a new empty disk image file, partition with an offset for a bootloader, and create an ext4 filesystem. Mount the new image's partition and copy everything from the EC2 image. Install grub (using Ubuntu's grub-legacy-ec2 package, not grub2). Convert the image file to vmdk using qemu-img. Create a new VirtualBox VM with the vmdk. Now the VM boots, grub loads, and the kernel is found. But it fails when it tries to mount the root device: dracut Warning: No root device "block:/dev/xvda1" found dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. dracut Warning: Signal caught! dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35.14-107.1.39.amzn1.x86_64 #1 I have tried changing /boot/grub/menu.lst to find the root device by label and UUID, but nothing works. I'm guessing the xen kernel is not compatible with VirtualBox. The reasoning behind all this effort is to make a Vagrant box that is as close to possible as the production enviroment, so deploys can be tested locally. I know it's cheap to do test runs on EC2, but poor connectivity often ruins the experience. Plus it would be really nice to have a virtual machine with the production environment so that co-workers don't have to install everything under the sun just to get up and running with app development. If I were to try running a different kernel, what kernel could I get to be as close as possible to Amazon Linux 2011.09?

  Read the article

• SMTP host name vs. domain in "From:" address vis-a-vis Email Deliverability

  - by Jared Duncan

  I'm trying to implement (or make sure that I'm correctly following) email sending best practices to improve deliverability, but the role of the smtp server's host name vs the domain name of the From: email address seems to be unclear, even after reading dozens of people's articles/input. Specifically, I understand that to satisfy the reverse DNS check, there must be a PTR record for the IP address of the sending machine that yields a domain name that matches the host name of the sending machine / SMTP server. Some say it needs to match the one given by the "hostname" command, most say it's the one provided with the HELO / EHLO statement, and this guy even says they MUST be the same (according to / enforced by what, I don't know; that's only a minor point of confusion, anyhow). First, what I can't find anywhere is whether or not the domain name of the From: email address needs to match the domain name of the SMTP server. So in my case, I have a VPS with linode. It primarily hosts a particular domain of mine, example.com, but I also sometimes do work on other projects: foo.com and bar.com. So what I'm wondering is if I can just leave the default linode PTR record (which resolves to abc.def.linode.com), make sure that abc.def.linode.com is what my mail server (qmail) is configured to say at HELO, and then proceed to use it to send out emails for example.com, foo.com, et al. If so, then I am confused by the advice given here, specifically (in a listing of bad case scenarios): No SPF record for the domain being used in the HELO command Why would THAT domain need an SPF record? And if it does, which domain should it provide whitelisting for: the HELO domain, or the domain of the From: email address (envelope sender)? Also, which domain would need to accept mail sent to [email protected]? If the domains must be the same, that would seem rather limiting to me, because then for every domain you wanted to send email from, you'd have to get another IP address for it. It would also compromise or ruin one's ability to do non-email sending things (e.g. wget) relatively anonymously. However, the upside--if this is the case--is that it would make for a far less confusing setup. I'm currently using the linode.com SMTP+PTR domain and example.com From: address combination without much of any deliverability issue, but my volume is very low and I'd like to know if someone out there has experience with larger volumes and has specifically tested the difference and/or has inside knowledge and/or has an authoritative answer (and source) for this particular question. I'm happy to clarify anything, let me know. Thanks in advance.

  Read the article

• HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

  - by Jaime

  Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

  Read the article

• Revolutionary brand powder packing machine price from affecting marketplace boom and put on uniform in addition to a lengthy service life

  - by user74606

  In mining in stone crushing, our machinery company's encounter becomes much more apparent. As a consequence of production capacity in between 600~800t/h of mining stone crusher, stone is mine Mobile Cone Crushing Plant Price 25~40 times, effectively solved the initially mining stone crusher operation because of low yield prices, no upkeep problems. Full chunk of mining stone crusher. Maximum particle size for crushing 1000x1200mm, an effective answer for the original side is mine stone provide, storing significant chunks of stone can not use complications in mines. Completed goods granularity is modest, only 2~15mm, an effective option for the original mine stone size, generally blocking chute production was an issue even the grinding machine. Two types of material mixed great uniformity, desulfurization of mining stone by adding weight considerably. Present quantity added is often reached 60%, effectively minimizing the cost of raw supplies. Electrical energy consumption has fallen. Dropped 1~2KWh/t tons of mining stone electrical energy consumption, annual electricity savings of one hundred,000 yuan. Efficient labor intensity of workers and also the atmosphere. Due to mine stone powder packing machine price a high degree of automation, with out human make contact with supplies, workers working circumstances enhanced significantly. Positive aspects, and along with mine for stone crushing, CS series cone Crusher has the following efficiency traits. CS series cone Crusher Chamber is divided into 3 unique designs, the user is usually chosen in accordance with the scenario on site crushing efficiency is high, uniform item size, grain shape, rolling mortar wall friction and put on uniform in addition to a extended service life of crushing cavity-. CS series cone Crusher utilizes a one of a kind dust-proof seal, sealing dependable, properly extend the service life of the lubricant replacement cycle and parts. CS series Sprial Sand washer price manufacture of important components to choose unique materials. Each and every stroke left rolling mortar wall of broken cone distances, by permitting a lot more products into the crushing cavity, as well as the formation of big discharge volume, speed of supplies by way of the crushing Chamber. This machine makes use of the principle of crushing cavity, also as unique laminated crushing, particle fragmentation, so that the completed product drastically improved the proportions of a cube, needle-shaped stones to lower particle levels extra evenly.

  Read the article

• Baseline / Benchmark Physical and virtual server performance

  - by EyeonTech

  I am setting up a new server and there are some options. I want to perform some benchmarks and I need your help in determining the best tools and if possible run pre-configured benchmarks designed for SQL servers on Windows Server 2008/2012. Step 1. Run a performance monitor on the current Live SQL server (Windows Server 2008 Virtual machine running on ESXi. New server Hardware rundown: Intel® Server System R1304BTLSHBN - 1U Rack, LGA1155 http://ark.intel.com/products/53559/Intel-Server-System-R1304BTLSHBN Intel Xeon E3-1270V2 2x Intel SSD 330 Series 240GB 2.5in SATA 6Gb/s 25nm 1x WD 2TB WD2002FAEX 2TB 64M SATA3 CAVIAR BLACK 4x 8GB 1333MHz DDR3 ECC CL9 DIMM There are several options for configurations and I want to benchmark some of them and share the results. Option 1. Configure 2x SSDs at RAID 0. Install Windows Server 2008 directly to the 2TB WD Caviar HDD. Store Database files on the RAID 0 Volume. Benchmark the OS direct on the hardware as an SQL Server. Store SQL Backup databases on the 2TB WD Caviar HDD. Option 2. Configure 2x SSDs at RAID 0. Install Windows Server 2012 directly to the 2TB WD Caviar HDD. Install Hyper-V. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. Option 3. Configure 2x SSDs at RAID 0. Install VMWare ESXi on a partition of the 2TB WD Caviar HDD. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. I have a few tools in mind from http://technet.microsoft.com/en-us/library/cc768530(v=bts.10).aspx. Any tools with pre-configured test would be fantastic. Specifically if there are pre-configured perfmon sets avaliable. Any opinions on the setup to gain the best results is welcome. Thanks in advance.

  Read the article

• mounting ext4 fs with block size of 65536

  - by seaquest

  I am doing some benchmarking on EXT4 performance on Compact Flash media. I have created an ext4 fs with block size of 65536. however I can not mount it on ubuntu-10.10-netbook-i386. (it is already mounting ext4 fs with 4096 bytes of block sizes) According to my readings on ext4 it should allow such big block sized fs. I want to hear your comments. root@ubuntu:~# mkfs.ext4 -b 65536 /dev/sda3 Warning: blocksize 65536 not usable on most systems. mke2fs 1.41.12 (17-May-2010) mkfs.ext4: 65536-byte blocks too big for system (max 4096) Proceed anyway? (y,n) y Warning: 65536-byte blocks too big for system (max 4096), forced to continue Filesystem label= OS type: Linux Block size=65536 (log=6) Fragment size=65536 (log=6) Stride=0 blocks, Stripe width=0 blocks 19968 inodes, 19830 blocks 991 blocks (5.00%) reserved for the super user First data block=0 1 block group 65528 blocks per group, 65528 fragments per group 19968 inodes per group Writing inode tables: done Creating journal (1024 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 37 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. root@ubuntu:~# tune2fs -l /dev/sda3 tune2fs 1.41.12 (17-May-2010) Filesystem volume name: <none> Last mounted on: <not available> Filesystem UUID: 4cf3f507-e7b4-463c-be11-5b408097099b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 19968 Block count: 19830 Reserved block count: 991 Free blocks: 18720 Free inodes: 19957 First block: 0 Block size: 65536 Fragment size: 65536 Blocks per group: 65528 Fragments per group: 65528 Inodes per group: 19968 Inode blocks per group: 78 Flex block group size: 16 Filesystem created: Sat Feb 5 14:39:55 2011 Last mount time: n/a Last write time: Sat Feb 5 14:40:02 2011 Mount count: 0 Maximum mount count: 37 Last checked: Sat Feb 5 14:39:55 2011 Check interval: 15552000 (6 months) Next check after: Thu Aug 4 14:39:55 2011 Lifetime writes: 70 MB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: afb5b570-9d47-4786-bad2-4aacb3b73516 Journal backup: inode blocks root@ubuntu:~# mount -t ext4 /dev/sda3 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/sda3, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

  Read the article

• Expectations for NTFS file recovery

  - by Fred Hamilton

  Yesterday I booted my XP system, and as I looked up a minute later I saw the light blue screen and tail-end of that pre-boot diskcheck Windows sometimes does if it finds an error (or was previously told to run a diskcheck drung the next boot). I didn't worry about it at the moment... But then I looked at my "scratch" disk, which was a 70% full, 750GB hard disk...and it now looks like it has been freshly formatted. It doesn't have a single file on it, just the hidden "System Volume Information" file and 750GB of freedom from data. I looked at some of the recovery tools from the Free NTFS partition recovery question and decided to try PC INSPECTOR™ File Recovery 4.x initially. It ran overnight and afterwards returned a list of thousands of files it could recover. The odd thing was that the filenames were lost, but the file extensions were not (WTF?). And all of the files were exactly 1,472kB in size. I recovered a dozen PDFs as a test, and 80% of them displayed OK despite being padded out to 1.5MB (though I assume any files 1472kB are hosed). My primary question is: Is this the best I can expect from any file recovery software when trying to recover NTFS files? Or is there perhaps something better out there? I assume this is as good as it gets, but wanted to check in with the experts first. Bonus questions: What might have happened to my drive? I didn't intentionally format it. I've never seen a disk error cause the drive to suddenly become a clean, reformatted drive. Could some malicious/confused software have told my PC to format my disk on reboot? Is that even a function Windows XP has? Why can the file extensions be recovered but not the filename? Does NTFS really treat them as separate entities? I thought I had 8.3 naming turned off, but maybe that had something to do with it. Or maybe it looks at the data in the file and guesses the extension?

  Read the article

• Windows Server 2008 Migration - Did I miss something?

  - by DevNULL

  I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

  Read the article

• Our VPS is being used as a Warez mule

  - by Mikuso

  The company I work for runs a series of ecommerce stores on a VPS. It's a WAMP stack, 50gb storage. We use an archaic piece of ecommerce software which operates almost entirely client-side. When an order is taken, it writes it to disk and then we schedule a task to download the orders once every 10 minutes. A few days ago, we ran out of disk space, which caused orders to fail to be written. I quickly hopped on to delete some old logs from the mailserver and freed up a couple of GB pretty quickly, but I wondered how we could fill up 50gb will nothing much more than logs. Turns out, we didn't. Hidden deep within the c:\System Volume Information directory, we have a stack of pirated videos, which seem to have appeared (looking at the timestamps) over the past three weeks. Porn, American Sports, Australian cooking shows. A very odd collection. Doesn't look like an individual's personal tastes - more like the VPS is being used as a mule. We have a 5-attempts and you're blocked policy on our FTP server (plus, there is no FTP account with access to that directory), and the windows user account has had it's password changed recently. The main avenues are sealed - and logs can verify that. I thought I'd watch and see if it happened again, and yes, another cooking show has appeared this morning. I am the only one to know of this problem at my company, and only one of two with access to the VPS (the other being my boss, but no - it's not him). So how is this happening? Is there a vulnerability in some of the software on the VPS? Are the VPS owners peddling warez across our rented space? (can they do this?) I don't want to delete the warez in case it is seen as a hostile action against this outside force, and they choose to retaliate. What should I do? How do I troubleshoot this? Has this happened to anyone else before?

  Read the article

• Postfix flow/hook reference, or high-level overview?

  - by threecheeseopera

  The Postfix MTA consists of several components/services that work together to perform the different stages of delivery and receipt of mail; these include the smtp daemon, the pickup and cleanup processes, the queue manager, the smtp service, pipe/spawn/virtual/rewrite ... and others (including the possibility of custom components). Postfix also provides several types of hooks that allow it to integrate with external software, such as policy servers, filters, bounce handlers, loggers, and authentication mechanisms; these hooks can be connected to different components/stages of the delivery process, and can communicate via (at least) IPC, network, database, several types of flat files, or a predefined protocol (e.g. milter). An old and very limited example of this is shown at this page. My question: Does anyone have access to a resource that describes these hooks, the components/delivery stages that the hook can interact with, and the supported communication methods? Or, more likely, documentation of the various Postfix components and the hooks/methods that they support? For example: Given the requirement "if the recipient primary MX server matches 'shadysmtpd', check the recipient address against a list; if there is a match, terminate the SMTP connection without notice". My software would need to 1) integrate into the proper part of the SMTP process, 2) use some method to perform the address check (TCP map server? regular expressions? mysql?), and 3) implement the required action (connection termination). Additionally, there will probably be several methods to accomplish this, and another requirement would be to find that which best fits (ex: a network server might be faster than a flat-file lookup; or, if a large volume of mail might be affected by this check, it should be performed as early in the mail process as possible). Real-world example: The apolicy policy server (performs checks on addresses according to user-defined rules) is designed as a standalone TCP server that hooks into Postfix inside the smtpd component via the directive 'check_policy_service inet:127.0.0.1:10001' in the 'smtpd_client_restrictions' configuration option. This means that, when Postfix first receives an item of mail to be delivered, it will create a TCP connection to the policy server address:port for the purpose of determining if the client is allowed to send mail from this server (in addition to whatever other restrictions / restriction lookup methods are defined in that option); the proper action will be taken based on the server's response. Notes: 1)The Postfix architecture page describes some of this information in ascii art; what I am hoping for is distilled, condensed, reference material. 2) Please correct me if I am wrong on any level; there is a mountain of material, and I am just one man ;) Thanks!

  Read the article

• Adaptec 5805 not recognized after reboot

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

  Read the article

• Windows Server 2008 Software Raid 5 - Data integrity issues

  - by Fopedush

  I've got a server running Windows Server 2008 R2, with a (windows native) software raid-5 array. The array consists of 7x 1TB Western Digital RE3 and RE4 drives. I have offline backups of this array. The problem is this: I noticed a few days ago after copying a large file to the disk that there was an integrity issue with that file - it was a ~12GB file that I had downloaded via uTorrent. After moving it to the raid array, I used uTorrent to relocate the download location, and performed a re-check so I could seed it from that location. The recheck found that only 6308/6310 chunks of the copied file were intact. My next step was to write a quick powershell script that would copy files to the array, while performing a SHA1 hash of the original and resultant files and comparing them. Smaller files (100-1000MB) copied over just fine. When I started copying larger data (~15GB), I found that the hash check failed about 2/3rds of the time. The corrupt files had very, very small inconsistencies - less than .01%. I further eliminated the possibility of networking or client issues by placing this large file on the C:\ of the server, and copying it repeatedly from there to the array, seeing similar results. Copying the data via explorer, powershell, or the standard windows command prompt yield the same results. None of the copies fail or report any problems. The raid array itself is listed as healthy in disk management. After a few experiments, I shut down the server and ran memtest overnight. No errors were detected. A basic run of chkdsk found no problems, but I did not use the /R flag, as I was unsure how that might affect a software raid-5 volume. I next ran Crystal Disk Info to check the smart data on the drives - but found that CDI only detected 5 out of 7 of the disks in the array. I have no idea why. Nevertheless, CDI shows the following "caution" flags on a single one of the drives: 05 199 199 140 000000000001 Reallocated Sectors Count C5 200 200 __0 000000000001 Current Pending Sector Count Which is a little bit alarming, but I don't really know what to do with the information. I hardly feel like one reallocated sector could be causing this. At this point, I'm looking for some guidance on what to do next. I need to determine the cause of this issue, but I'm hesitant to run chkdsk /R or any bootable disk health checkers because I'm afraid they might break the array. I've considered triggering a re-sync of the array, but I'm not actually sure how to do that without doing something silly like manually dropping a disk and then restoring it. Any advice that could help me ferret out the precise cause of this issue would be greatly appreciated.

  Read the article

• Repair corrupt hard disk on Mac without install CD

  - by Sarah

  The hard disk of my late 2009 MacBook Pro appears to have become corrupted. I am traveling and do not have my install CD (and won't for several weeks, nor will I be anywhere near an Apple store). The hard disk is not the original, which failed in June 2011. It's some Hitachi replacement installed by IT. History: I was typing an email this afternoon, my computer suddenly started making soft clicking sounds and then froze. I was not moving around. I rebooted, which took a while. I heard more clicking sounds and the computer froze at least once again. It's now kind of working, with mdworker sucking up one CPU. There are no awkward hard drive sounds when I run Chrome or play music. However, when I launched Stickies, I found no trace of my saved Stickies. I ran a live disk verification from within Disk Utility, and it reported Problem: As reported, I don't have access to an installation disc and am nowhere near an area where I can get one for at least two weeks. I have the option of asking someone to go to some trouble and expense to get one for me, but I'm not sure it's worth it: I've read that I can use fsck from single-user mode to repair the disk. Should I just try this? Is it risky? I'm concerned that the clicky sound portends imminent (mechanical) hard drive failure, so it's not worth doing a silly repair. This hard disk is backed up, but I definitely won't be able to access the backup while traveling. I'd like to maximize the probability that I can keep using my computer (and all its current files) while traveling. Update I bit the bullet and ran fsck -fy from single-user mode. It only needed one pass (modification) to reach the "okay" stage. However, rebooting took nearly 5 min and involved several rounds of scratchy sounds and a few bad clicks. I'm now back to kind of using my computer (the same files are missing as before). When I ran live disk verification from Disk Utility this time, however, it reported that the volume appears to be OK. Am I right to infer from the scratchy sounds, however, that my hard drive is still rapidly on its way out? Is there anything else I can do to increase its functionality over the next few weeks?

  Read the article

• OEM sound card with no drivers or support

  - by randy

  I thought my sound card was going out so I bought a sound card online. Everything seemed to work ok, I do have sound. But after a few months, I noticed the extra software that downloaded with the sound card drivers didn't work. I ended up contacting creative and after a month of e-mail support, they asked for the serial number and/or model number. Their reply back was I had purchased an OEM sound card and they could not provide support for that, and informed me that that is why their drivers and software didn't work. They informed me that I had to contact the company that distributed the sound card and install their software. Is there anything I can do to find out who distributed this sound card, or is there anything I can do to get other features to work? I have 4 speakers and a sub but only 2 speakers produce sound. The only control I have is the volume. Creative's driver update program will find my sound card, download updates and even added software, but if I try to click on a downloaded program like Creative's Toolbox or Media Center, I get an error that it cannot find the devise. That is why I contacted creative in the first place. EDIT Thanks for the responses everyone. Here's an update. I thought I'd go thru my old computer stuff for my classes at school. I have a lot of old stuff saved, boxes and cables and stuff. I found the box the sound card came in. It looks like a box you'd buy at the store, like Best Buy or CompUSA. I worked with creative for such a long time, it went past the point of being able to return it to the junk online store this shipped from. The box did have an install CD, so I thought I'd start over to reinstall the drivers and software that shipped with the card. I noticed that the install would uninstall a program, then reinstall it. so I thought things were working out. But no good. Everything still works but the programs were still bad. I'd get an error trying to load them - not found. I'll look on the card the next time I get a chance and see if I can spot any kind of name on it.

  Read the article

• Recovering damaged external hard disk by installing internally

  - by nfarshchi

  I had a 1TB Western Digital (My book series) 3.5" USB3. One day, the SATA to USB3 converter board was damaged and has not worked since. I decided to open the cover and use the HDD as an internal HDD. When I attached the HDD to my PC and booted up in Windows, it asked me which type of ????? I want to use "MBR or GBR" (I dont remember the exact question) I chose MBR and Windows gave me a 1TB empty Hard drive. I tried to recover with recover my files and some other recovery programs but no success. Some one told me that you should choosed GBR instead of MBR . How can I do that now? Another guy told me that the SATA to USB3 converter board is coded to save data on HDD and you can not use them internally without losing data, and I should find another SATA to USB3 board (exact same). It is impossible to find because they are not produced any more. Please help me to find a solution to bring back my data. UPDATE I have 1TB WD "Mybook" USB 3. the board that convert sata to usb3 was damaged. so when the HDD was in the box computer did not recognize it. I opened the box and remove HDD to use it internal. after connecting to my PC windows showed me one massage that I had two choice MBR or GPT I choosed MBR one and windows gave me 1TB empty new volume. I tried many recovery software to recover my data but no success. I brought it to one expert recovery company and they told me the converter board (SATA to USB3) make some encryption on data and with out that board you cannot recover any thing. so I bought another empty WD box and put the HDD inside but even after that also there is no file. I tried to recover again in this state but no success. so I have some unanswered question. does this converted boards make any password or encryption? if yes how can I solve it? does using many recovery programs affected my data? any suggestion or solution for bring back my data? I had use recovery programs such as : recover my files , EaseUS data recovery, easy recovery, test disk, Ontrack easy recovery . Note: when I was using test disk it asked me to choose which partition table I want to use. as it was I choose NTFS, does this made any change on data?

  Read the article

• SQL Express 2008 R2 on Amazon EC2 instance: tons of free memory, poor performance

  - by gravyface

  The old SQL Express 2005 was running on a low-end single Xeon CPU Dell server, RAID 5 7200 disks, 2 GB RAM (SBS 2003). I have not done any baseline measurements on the old physical server, but the Web app is used by half a dozen people (maybe 2 concurrently), so I figured "how bad can an Amazon EC2 instance be?". It's pretty horrible: a difference of 8 seconds of load time on one screen. First of all, I'm not a SQL guru, but here's what I've tried: Had a Small Instance, now running a c1.medium (High Cpu Medium) Windows 2008 32-bit R2 EBS-backed instance running IIS 7.5 and SQL Express 2008 R2. No noticeable improvement. Changed Page File from fixed 256 to Automatic. Setup a Striped Mirror from within Disk Management with two attached 1 GB EBS volumes. Moved database and transaction log, left everything else on the boot EBS volume. No noticeable change. Looked at memory, ~1000 MB of physical memory free (1.7 GB total). Changed SQL instance to use a minimum of 1024 RAM; restarted server, no change in memory usage. SQL still only using ~28MB of RAM(!). So I'm thinking: this database is tiny (28MB), why isn't the whole thing cached in RAM? Surely that would speed up performance. The transaction log is 241 MB. Seems kind of large in comparison -- has this not been committed? Is it a cause of performance degradation? I recall something about Recovery Models and log sizes somewhere in my travels, but not positive. Another thing: the old server was running SQL Express 2005. Not sure if that has any impact, but I tried changing the compatibility level from SQL 2000 to 2008, but that had no effect. Anyways, what else can I try here? Seems ridiculous to throw more virtual hardware at this thing. I know I/O is going to be rough on EBS volumes, but surely others are successfully running small .NET/SQL apps on reasonably priced instances?

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• Secure wipe of a hard drive using WinPE.

  - by Derek Meier

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The wiping of a hard drive is typically seen as fairly trivial.  There are tons of applications out there that will do it for you.  Point àClickàGlobal-Thermo Nuclear War. However, these applications are typically expensive or unreliable.  Plus, if you have a laptop or lack a secondary computer to put the hard drive into – how on earth do you wipe it quickly and easily while still conforming to a 7 pass rule (this means that every possible bit on the hard drive is set to 0 and then to 1 seven times in a row)?  Yes, one pass should be enough – as turning every bit from a 1 to a zero will wipe the data from existence.  But, we’re dealing with tinfoil hat wearing types here people.  DOD standards dictate at least 3 passes, and typically 7 is the preferred amount.  I’m not going to argue about data recovery.  I have been told to use 7 passes, and so I will.  So say we all! Quite some time ago I used to make a BartPE XP-based boot cd for the original purpose of securely wiping data.  I loved BartPE and integrated so many plugins into my builds that I could do pretty much anything directly from CD.  Reset passwords, uninstall security updates, wipe drives, chkdsk, remove spyware, install Windows, etc.  However, with the newer multi-core systems and new chipsets coming out from vendors, I found that BartPE was rather difficult to keep up to date.  I have since switched to WinPE 3.0 (Windows Preinstallation Environment). http://technet.microsoft.com/en-us/library/cc748933(WS.10).aspx  It is fairly simple to create your own CD, and I have made a few helpful scripts to easily integrate drivers and rebuild the ISO file for you.  I’ll cover making your own boot CD utilizing WinPE 3.0 in a later post – I can talk about WinPE forever and need to collect my thoughts!!  My wife loves talking about WinPE almost as much as talking about Doctor Who.  Wait, did I say loves?  Hmmmm, I may have meant loathes. The topic at hand?  Right. Wiping a drive! I must have drunk too much coffee this morning.  I like to use a simple batch script that calls a combination of diskpart.exe from Microsoft® and Sdelete.exe created by our friend Mark Russinovich. http://technet.microsoft.com/en-us/sysinternals/bb897443.aspx All of the following files are located within the same directory on my WinPE boot CD. Here are the contents of wipe_me.bat, script.txt and sdelete.reg. Wipe_me.bat:   @echo off echo. echo     I will completely wipe the local hard drives using echo     7 individual wipes. The data will NOT echo     be recoverable.  I will begin after you pause echo. echo Preparing to partition and format disk. Diskpart.exe /s "script.txt" REM I was annoyed by not having a completely automated script – and Sdelete wants you to accept the license agreement. So, I added a registry file to skip doing that. regedit /S sdelete.reg rem sdelete options selected are: -p (passes) -c (zero free space) -s (recurse through subdirectories, if any) -z (clean free space) [drive letter] sdelete.exe -p 7 -c -s -z c: echo. echo Pass seven complete. echo. echo Wiping complete. Pause exit script.txt: list disk select disk 0 clean create partition primary select partition 1 active format FS=NTFS LABEL="New Volume" QUICK assign letter=c exit *Notes: This script assumes one local hard drive – change the script as you see fit for your environment.  The clean command will overwrite the master boot record and any hidden sector information – so be careful!   sdelete.reg: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Sysinternals\SDelete] "EulaAccepted"=dword:00000001   With a combination of WinPE, sdelete.exe and your friendly neighborhood text editor you can begin wiping drives as quickly and easily as possible!  I hope this helps, I get asked this a lot in my line of work. Best of luck, Derek

  Read the article

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Big Data – Buzz Words: Importance of Relational Database in Big Data World – Day 9 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned what is HDFS. In this article we will take a quick look at the importance of the Relational Database in Big Data world. A Big Question? Here are a few questions I often received since the beginning of the Big Data Series - Does the relational database have no space in the story of the Big Data? Does relational database is no longer relevant as Big Data is evolving? Is relational database not capable to handle Big Data? Is it true that one no longer has to learn about relational data if Big Data is the final destination? Well, every single time when I hear that one person wants to learn about Big Data and is no longer interested in learning about relational database, I find it as a bit far stretched. I am not here to give ambiguous answers of It Depends. I am personally very clear that one who is aspiring to become Big Data Scientist or Big Data Expert they should learn about relational database. NoSQL Movement The reason for the NoSQL Movement in recent time was because of the two important advantages of the NoSQL databases. Performance Flexible Schema In personal experience I have found that when I use NoSQL I have found both of the above listed advantages when I use NoSQL database. There are instances when I found relational database too much restrictive when my data is unstructured as well as they have in the datatype which my Relational Database does not support. It is the same case when I have found that NoSQL solution performing much better than relational databases. I must say that I am a big fan of NoSQL solutions in the recent times but I have also seen occasions and situations where relational database is still perfect fit even though the database is growing increasingly as well have all the symptoms of the big data. Situations in Relational Database Outperforms Adhoc reporting is the one of the most common scenarios where NoSQL is does not have optimal solution. For example reporting queries often needs to aggregate based on the columns which are not indexed as well are built while the report is running, in this kind of scenario NoSQL databases (document database stores, distributed key value stores) database often does not perform well. In the case of the ad-hoc reporting I have often found it is much easier to work with relational databases. SQL is the most popular computer language of all the time. I have been using it for almost over 10 years and I feel that I will be using it for a long time in future. There are plenty of the tools, connectors and awareness of the SQL language in the industry. Pretty much every programming language has a written drivers for the SQL language and most of the developers have learned this language during their school/college time. In many cases, writing query based on SQL is much easier than writing queries in NoSQL supported languages. I believe this is the current situation but in the future this situation can reverse when No SQL query languages are equally popular. ACID (Atomicity Consistency Isolation Durability) – Not all the NoSQL solutions offers ACID compliant language. There are always situations (for example banking transactions, eCommerce shopping carts etc.) where if there is no ACID the operations can be invalid as well database integrity can be at risk. Even though the data volume indeed qualify as a Big Data there are always operations in the application which absolutely needs ACID compliance matured language. The Mixed Bag I have often heard argument that all the big social media sites now a days have moved away from Relational Database. Actually this is not entirely true. While researching about Big Data and Relational Database, I have found that many of the popular social media sites uses Big Data solutions along with Relational Database. Many are using relational databases to deliver the results to end user on the run time and many still uses a relational database as their major backbone. Here are a few examples: Facebook uses MySQL to display the timeline. (Reference Link) Twitter uses MySQL. (Reference Link) Tumblr uses Sharded MySQL (Reference Link) Wikipedia uses MySQL for data storage. (Reference Link) There are many for prominent organizations which are running large scale applications uses relational database along with various Big Data frameworks to satisfy their various business needs. Summary I believe that RDBMS is like a vanilla ice cream. Everybody loves it and everybody has it. NoSQL and other solutions are like chocolate ice cream or custom ice cream – there is a huge base which loves them and wants them but not every ice cream maker can make it just right  for everyone’s taste. No matter how fancy an ice cream store is there is always plain vanilla ice cream available there. Just like the same, there are always cases and situations in the Big Data’s story where traditional relational database is the part of the whole story. In the real world scenarios there will be always the case when there will be need of the relational database concepts and its ideology. It is extremely important to accept relational database as one of the key components of the Big Data instead of treating it as a substandard technology. Ray of Hope – NewSQL In this module we discussed that there are places where we need ACID compliance from our Big Data application and NoSQL will not support that out of box. There is a new termed coined for the application/tool which supports most of the properties of the traditional RDBMS and supports Big Data infrastructure – NewSQL. Tomorrow In tomorrow’s blog post we will discuss about NewSQL. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >