Search Results

Search found 4634 results on 186 pages for 'displays'.

Page 103/186 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• MapView tiles loading in Android

  - by Pich

  In the Maps application (at least version 5) for Android the tiles are loading in a different way, than when using a MapView in my own application, when for example zooming in or out. In the MapView displays a gray checkered image until the tile is fully loaded an than the map is displayed. In Maps application this it not the case all the time. Tiles that are not fully loaded are still showing a map but it is blurry. The Maps application way of showing the map when zooming is much prettier for the eye. Is it possible to have this "feature" in a MapView in my own application as well? Best regards P

  Read the article

• Why would I get a bus error or segmentation fault when calling free() normally?

  - by chucknelson

  I have a very simple test program, running on Solaris 5.8: #include <stdio.h> #include <stdlib.h> int main(void) { char *paths; paths = getenv("PATH"); printf("Paths: %s\n", paths); free(paths); // this causes a bus error return 0; } If I don't call free() at the end, it displays the message fine and exits. If I include the free() call, it crashes with a bus error. I've had other calls to free(), in other programs, cause segmentation faults as well. Even if I allocate the memory for *paths myself, free() will cause a bus error. Is there some reason trying to free up the memory is causing a crash?

  Read the article

• Create a Visual Studio type look using Java Swing

  - by JeffHeaton

  I would like to create extend a Java Swing application to have a look somewhat similar to an IDE such as Eclipse or Visual Studio. That’s, there would be a panel at the left that displays a tree, and a tab panel on the right that allows several elements of the tree to be opened and edited on right. For this I could easily use a BorderLayout and just use the center and left areas. However, I would also like to have the ability for the user to drag the border between these two panels, just like Eclipse and Visual Studio allow. I can think of several ways to do this, but was curious if anyone had found a particularly good way to do this, or knew of an example. I’ve googled for it, but have not found anything.

  Read the article

• iPhone: TabBarController as second level of Navigation Controller

  - by Nebs

  I'm new to iphone development. I've read tutorials about implementing a tab bar controller on the window (eg as the main controller for the app). But how can I create a tab bar controller as a 'standalone' UIViewController that can be called by a navigation bar controller? Basically my navigation bar controller has an array of UIViewControllers that it displays in the table and then loads the appropriate view/controller when a user selects an item. Now I want one of these loaded views/controllers to be a tab bar controller. How can I do this? I'm not sure how to create a tab bar controller on its own without having an outlet/instance in the application delegate. Hope that made sense. Thanks.

  Read the article

• RMO on Windows 7 - The Specified module could not be found

  - by AGoodDisplayName

  My machine: Windows XP (x86), VS2008, .net 3.5, sql server 2005, WinForms - App works fine. Production Machines: Windows 7 (x64), SQl Server 2005 Express - App Starts but throws exception Visual Studio Targeting x86 on setup project and RMO project. Visual Studio gives me a a couple warnings but I can still build: Unable to find dependency 'MICROSOFT.SQLSERVER.MANAGEMENT.SQLPARSER' (Signature='89845DCD8080CC91' Version='10.0.0.0') of assembly 'Microsoft.SqlServer.Smo.dll' Unable to find dependency 'MICROSOFT.SQLSERVER.MANAGEMENT.SQLPARSER' (Signature='89845DCD8080CC91' Version='10.0.0.0') of assembly 'Microsoft.SqlServer.Management.SmoMetadataProvider.dll' This is a simple RMO (Replication Management Objects) app that initiates a pull subscription in SQL Server 2005 and displays status. Works fine on my machine, but fails on the production machine. I'm using a setup project to install the app on the production machine, but I think I'm missing a dependency somewhere, but I can't figure it out. On the production machine the app starts fine, but when I try to synch the subscription i get: System.IO.FileNotFoundException: The Specified module could not be found. (Exception from HResult: 0x8007007E)

  Read the article

• Remote application monitoring through Visual GC

  - by Poole

  I am trying to monitor an application available on remote machine using VisualVM & Visual GC. I have enabled the jmxremote on the remote side as follows: -Dcom.sun.management.jmxremote, -Dcom.sun.management.jmxremote.port=8888, -Dcom.sun.management.jmxremote.ssl=false, -Dcom.sun.management.jmxremote.authenticate=false While monitoring through VisualVM, everything runs fine but VisualGC doesn't displays any stats (getting Not Supported for this JVM error). While tried to monitor one local application, VisualGC runs fine... Got success with the remote app once started jstad on the remote jvm. Is this a known issue with VisualGC...? Remote JVM - 1.5 Local JVM - 1.6

  Read the article

• low latency data link pc to android

  - by steveh

  can anyone recommend a method for low latency bi-directional com link between my pc app and android slave app. the app i have works now via wifi but the latency is too slow (about 300mS), i'm looking to get it down to 10mS or so. the android is acting like a glorified remote control to the game on the pc. the apk displays a low res image and sends button presses back to the game and the round trip need to be quick i'm thinking the only option beside the network, is to connect a usb cable but i don't see a lot of support for that path and not even sure it would be lower latency than wifi any ideas please?

  Read the article

• Powershell Select-Object from array not working

  - by Andrew

  I am trying to seperate values in an array so i can pass them to another function. Am using the select-Object function within a for loop to go through each line and separate the timestamp and value fields. However, it doesn't matter what i do the below code only displays the first select-object variable for each line. The second select-object command doesn't seem to work as my output is a blank line for each of the 6 rows. Any ideas on how to get both values $ReportData = $SystemStats.get_performance_graph_csv_statistics( (,$Query) ) ### Allocate a new encoder and turn the byte array into a string $ASCII = New-Object -TypeName System.Text.ASCIIEncoding $csvdata = $ASCII.GetString($ReportData[0].statistic_data) $csv2 = convertFrom-CSV $csvdata $newarray = $csv2 | Where-Object {$_.utilization -ne "0.0000000000e+00" -and $_.utilization -ne "nan" } for ( $n = 0; $n -lt $newarray.Length; $n++) { $nTime = $newarray[$n] $nUtil = $newarray[$n] $util = $nUtil | select-object Utilization $util $tstamp = $nTime | select-object timestamp $tstamp }

  Read the article

• Is this possible with Sql 2005 CTE?

  - by aenima1982

  I have been working on a query that will return a suggested start date for a manufacturing line based on due date and the number of minutes needed to complete the task. There is a calendar table(LINE_ID, CALENDAR_DATE, SCHEDULED_MINUTES) that displays per manufacturing line, the number of minutes scheduled for that day. Example: (Usually 3 shifts worth of time scheduled per day, no weekends but can vary) 1, 06/8/2010 00:00:00.000, 1440 1, 06/7/2010 00:00:00.000, 1440 1, 06/6/2010 00:00:00.000, 0 1, 06/5/2010 00:00:00.000, 0 1, 06/4/2010 00:00:00.000, 1440 In order to get the suggested start date, I need to start with the due date and iterate downward through the days until i have accumulated enough time to complete the task. My Question can something like this be done with CTE, or is this something that should be handled by a cursor. Or... am i just going about this the wrong way completely??

  Read the article

• How do you create a Google Maps-esque drop down dialog?

  - by Daniel Lew

  In the Google Maps application, when you open the menu and click on "Directions", it pops up a dialog that is unique to Google Maps. It keeps the MapView in the background, but displays the search dialog from the top (or bottom, if you're on an old version of Android). I was curious if anyone knew how they achieved this effect. I'm willing to create a custom Dialog, but it seems that Dialogs are designed to pop into the middle of the screen (any other types of dialogs are denied permission as system dialogs). What trick is Google Maps using?

  Read the article

• Get products to display on custom Magento page

  - by Eric

  How can you get products to display on a custom Magento page? Naturally, this is not an uncommon question but nothing that I've seen has solved it for me. The common response is to put the following code in through the CMS editor: {{block type="catalog/product_list" name="home.catalog.product.list" alias="products_homepage” template=”catalog/product/list.phtml”}} Which just displays the message "There are no products matching the selection." on my page. Other websites advise reindexing the data through the Magento admin controls, clearing the Magento cache, and making sure products are set to a store, none of which helped in my case. Anyone have any ideas?

  Read the article

• Is there a way to bring an application's GUI to the current desktop?

  - by Davy8

  Background: Started a fair amount of work before realizing that a Windows Service cannot start an app with a GUI that displays without potential problems. The proper solution of separating the GUI of the app to be started is non-trivial, so I'm trying to think of alternative solutions. There is a GUI to manage the service that is a separate executable, but the process to be launched (actually multiple instances of it) has its own GUI that needs to be shown. It doesn't need to be made visible by the service itself, but it needs to be at least able to be made visible by another process with a visible GUI. The Windows User that is running the service and that needs to see the GUI of the launched process is the same and known at install time. Is there some way to accomplish this or is it back to the drawing board? Also both the service and the app to launch are both our code and modifiable.

  Read the article

• Fully custom validation error message with Rails

  - by marcgg

  Using Rails I'm trying to get an error message like "The song field can't be empty" on save. Doing the following: validates_presence_of :song_rep_xyz, :message => "can't be empty" ... only displays "Song Rep XYW can't be empty", which is not good because the title of the field is not user friendly. How can I change the title of the field itself ? I could change the actual name of the field in the database, but I have multiple "song" fields and I do need to have specific field names. I don't want to hack around rails' validation process and I feel there should be a way of fixing that.

  Read the article

• Wordpress show next 3 x number adjacent custom posts from existing

  - by user2463284

  On a single/detail Custom Post Page I would like to display a custom nav of li's or divs in a sidebar that displays both title, excerpt and permalink for the next 3 posts within the custom post series. So if we are on custom post 3 then it would show 4, 5, 6 in the sidebar. The closest I've found to this is :-= global $post; $current_post = $post; // remember the current post for($i = 1; $i <= 3; $i++){ $post = get_previous_post(); // this uses $post->ID setup_postdata($post); // do your stuff here the_title(); } $post = $current_post; // restore Problem is this only shows the first next post and I need to show 3. Thanks Glennyboy

  Read the article

• Multimedia content in REST responce(XML/JSON)

  - by Koushik

  In my thesis I need to test different architectures. A request to a REST web service developed using Apache CXF and Spring MVC with MySQL as back end serving references(a field in database) to images,audio and video files stored in file system. In the response message, what is the best method to send the content to the client(another application using the service which I developed). URI: http://www.filmservices.com/film/{id} A client here is not the end user. Send the encoded hyperlink's(where the content is stored in the file system) to the client, so that the client renders the response and displays it to the browser. Use Base64 to encode the message(image,audio,video) and send it to the client. Main concern is performance.

  Read the article

• Browser Compatablitiy, Support, Modern Browsers and older Versions.

  - by smoop

  This is a question to all web-developers working in the industry more than a few years. Today the server guy at my work told me that his browser didnt render a google font I used on a site properly, so I checked his browser - it was firefox 3.5. (google font Raleway).. This made me think.. I know for some of our sites its a requirement to support IE6 (larger corperate sites) but for the rest (personal sites) should I be looking at developing for all incrments of firefox, chrome, IE and safari???? Does your company still support IE6? Does your company support previous versions of modern browsers or just the latest ones? and finally, has anyone else had this problem with FF 3.5 and Google Hosted font Raleway..(the font displays extra extra thing so the font is almost unreadable) If anyones interested I found a working solution to my font problem here: http://www.jshsolutions.net/google-webfonts-cross-browser-fix-howto/ Sam

  Read the article

• will_paginate without use of activerecord

  - by truthSeekr

  I apologize if this is a trivial question or my understanding of rails is weak. I have 2 actions in my controller, index and refine_data. index fetches and displays all the data from a database table. refine_data weeds out unwanted data using regex and returns a subset of the data. Controller looks like: def index Result.paginate :per_page => 5, :page => params[:page], :order => 'created_at DESC' end def refine_data results = Result.all new_results = get_subset(results) redirect_to :action => 'index' end I would like to redirect the refine_data action to the same view (index) with new_results. As new_results are not from the database table (or model), how do I go about constructing my paginate?

  Read the article

• What is the best way of retrieving a specific post in Wordpress?

  - by Steven

  I need to retrieve a specific post to display on my websites front page. To avoid hard coding the post ID, I've added a custom property where I add the post ID. The following code displays the wanted post: (The code is within the LOOP) // Get content from specific post (in this case, Åpningstider post)) $openingHoursID = get_post_meta($post->ID, "apningstider", true); if (!empty($openingHoursID)) { $openingHoursPost = get_post($openingHoursID); $openingHours = $openingHoursPost->post_content; } else $openingHours = "Åpningstid ikke angitt"; <div class="openinghours"><?php echo $openingHours; ?></div> Is there a better / easier way? The output is striped for HTML. How can I maintain HTML?

  Read the article

• Processing variable number of form fields

  - by a_m0d

  I am working on a form which displays information about orders. Each order has a unique id, but they are not necessarily sequential on the form. Also, the number of fields can vary (one field per row on the form). The input into the form will not be mapped straight into the database, but will be added to the current value in the database, and then saved. An example of the form is in the picture below - the callout on the right shows the id for each row. I know how to generate the form like this, but I can't work out how I can easily process each of these rows reliably. I also know how to give each of the fields a unique identifier, like name="row-23", but how can I translate that name so that I can update the related record in the database?

  Read the article

• Programatically opening an xml file in MS Word

  - by Dan Revell

  I'm opening an xml file in Microsoft Word 2007 using C#. I'm using an xsl file to define the layout which worked up to the point that I needed to include an image. I used the typical src html tag and the image displays when the xml is viewed in ie but not when it's opened in Word. I get the image place holder so I can only assume Word simply can't find the image. It's sitting next to both the xml file and xsl file but that doesn't make any difference. To open the document I'm passing the filenames for both the xml and xsl. I would imagine that as the src is in the xsl it would just look relative to one of these files. Any suggestions would be much appreciated. [EDIT] Apologies I lost track of this one. I fixed it in the end. I'll check what my solution was tomorrow and update this.

  Read the article

• Jquery - Convert ascii chars back to HTML

  - by sdmiller

  I am reading data from an html file to load into a div. The problem I am having is, the program that writes the html files is converting to <br /> SO when I execute $('#items').load('/News/list.aspx'); it displays as a string on my page instead of reading it as a page break. I have tried to read the above file into a variable to do a string replace on the <br /> but it doesn't seem to work. Any suggestions?

  Read the article

• How can I close a SimpleModal dialog when the user clicks the Back button?

  - by Wally Hartshorn

  When a user clicks on a button or link, I use the SimpleModal jQuery plugin to display a dialog to overlay the entire page, preventing the user from clicking another button or link during the delay before the next page loads. (I'd like to avoid this, but that's an issue for another day.) After the next page displays, if the user clicks the Back button, the previous page still has the SimpleModal overlay displayed, preventing them from using the page. This is a problem. How can I cause the SimpleModal dialog to close automatically either when the leaves the page or when the user clicks the Back button to return to the page? I tried this without success: $("body").unload(function() { $.modal.close(); }); Thanks! Wally

  Read the article

• How do I create a point system in a Rails app that assigns points to users and non-authenticated-use

  - by codyvbrown

  I'm building a question and answer application on top of twitter and I'm hitting some snags because I'm inevitably dealing with two classes of users: authenticated and non-authenticated. The site enable users to give points to other users, who may or may not be authenticated, and I want to create a site-wide point system where the application stores and displays this information on their profile. I want to save this point data to the user because that would be faster and more efficient but non-authenticated users aren't in our system, we only have the twitter handle. So instead we display the points in our system like this: @points = point.all( :select => "tag, count(*) AS count", # Return tag and count :group => 'tag', # Group by the tag :order => "2 desc", :conditions => {:twitter_handle => params[:username]}) Is there a better way to do this? Is there a better way to associate data with non-authenticated users?

  Read the article

• Determine coordinates of rotated rectangle

  - by MathieuK

  I'm creating an utility application that should detect and report the coordinates of the corners of a transparent rectangle (alpha=0) within an image. So far, I've set up a system with Javascript + Canvas that displays the image and starts a floodfill-like operation when I click inside the transparent rectangle in the image. It correctly determines the bounding box of the floodfill operation and as such can provide me the correct coordinates. Here's my implementation so-far: http://www.scriptorama.nl/image/ (works in recent Firefox / Safari ). However, the bounding box approach breaks down then the transparent rectangle is rotated (CW or CCW) as the resulting bounding box no longer properly represents the proper width and height. I've tried to come up with a few alternatives to detect to corners, but have not been able to think up a proper solution. So, does anyone have any suggestions on how I might approach this so I can properly detect the coordinates of 4 corners of the rotated rectangle?

  Read the article

• ASP.NET MVC Render Ajax / Standard View

  - by Wayne

  I am a little confused and making it alot more complicated than this needs to be! Here is what I have... A view which displays a drop down of US States. When the user chooses a state it loads a list of data from a database and returns the results (populates the View Model) and the View renders the information. What I wanted to do was have have the dropdown trigger an Ajax event which performs the data load, but also wanted it to depreciate if the user didn't have Javascript enabled. How would I go about rendering the view with AND without javascript / ajax? Hope that makes sense. Thanks for your help.

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >