Search Results

Search found 18580 results on 744 pages for 'wireless connection'.

Page 103/744 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

• Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

  - by Gareth

  This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

  Read the article

• How to stop intermittent playback on airtunes (iTunes + Airport Express)?

  - by Alex B

  Is there a definitive answer for how to stop intermittent "skips" or pauses while playing music from iTunes to an airport express connected to my home stereo? When I read other forums I see a wealth of posts that say "I did XYZ and it's fixed" followed by "I tried XYZ and it didn't work." This does not appear to be signal strength related. The green light on the Airport Express does not turn to yellow/orange. Other wireless devices have no trouble connecting at the same or greater distances from the wireless router.

  Read the article

• Port forwarding + shared connection with Ubuntu

  - by Joey Adams

  Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

  Read the article

• Copying files from NAS to NAS drives

  - by user1001421

  Very simple question. I've got 2 NAS drive that are "wire" connected via a router. If I have a wireless laptop and request a large amount of data be copied from one NAS drive to the other, does the network traffic go direct from the one drive to the other, going via the wired network, or does the network traffic go via my laptop, if you see what I mean. IE. From the NAS drives wired network, to the wireless network and then back to the wired network. Is this a common bottle-neck when copying a large amount of data? And if so, is there a way to avoid it. Thanks.

  Read the article

• Windows 8.1 killed notebook's wifi

  - by char1es

  Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

  Read the article

• Should I use 802.11n with a 15 Mbps ISP (Comcast Cable)?

  - by stackoverflowuser2010

  I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP. I know that 802.11n has a max bandwidth of 300 Mbps, and it would help for intra-house transfers, such as streaming video from one computer to another. But is there any benefit to 802.11n for Internet activity, such as web browswing, gaming, and streaming video from Netflix?

  Read the article

• Can't set-up Wifi Adhoc on my Raspberry Pi with an USB dongle

  - by Wouter

  I am trying to set-up an access point (ad-hoc) for my Raspberry Pi. That means I'm trying to "share" the ethernet connection over Wi-Fi. I am doing this using my Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter. When following a tutorial (or actually every tutorial), it immediately goes wrong. root@pinkypi:/home/pi# iwconfig wlan0 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Device or resource busy. I already tried ifdown and not having it in the USB port at the startup. If it helps, every action with the thing fail (or at least setting the mode). I am using Debian. I'm sure I'm overseeing something, but I can't find out what. What is wrong?

  Read the article

• Loss of iPod nano connection via VirtualBox and iTunes

  - by user69245

  I use VirtualBox 4.12 with Ubuntu 12.04, and up until a couple of days ago I was able to sync my iPod nano, my iPod Classic and my iPad via Windows XP and iTunes. A few days ago, when I connected the iPod nano, iTunes told me it was in recovery and I'd have to Restore it. I did this, but when it started up again I was told it was still in recovery. I went through this loop a few times, and then I got it to work again, and synched successfully. Since then, I have been unable to sync my iPod nano, although both iPod Classic and iPad work fine. I have successfully synched the iPod on a laptop with Windows XP since then, but each time I connect it through VirtualBox I get the same error message. I have tried disabling the iPod service in (the VirtualBox version of) Windows, and find that the iPod isn't being mounted as a disc drive, which is what happens in Ubuntu, and on my Windows XP laptop. I've tried changing USB leads, and I've also booted Windows XP on my Ubuntu machine, and here iTunes recognises the iPod nano. As far as I know, I made no changes to the configuration of VirtualBox between the time it was synching satisfactorily and the time it failed. I don't think iTunes is at fault here, as the same version of iTunes syncs with the iPod nano on two different computers running Windows XP - I think it may be the way XP running in VirtualBox handles the mounting of the iPod. Any suggestions?

  Read the article

• Virtualbox: host only networking - proxy internet connection

  - by Russell

  I'll ask my question first, then give details about where I am coming from: Is it possible to use host only, then have ubuntu act as a proxy to provide internet access to windows? If so, how? I am trying to get the right combination of networking for my virtualbox windows client VM (win7). My host is ubuntu 10.10 (maverick). I believe I understand the basic network options (please correct me if I am incorrect): NAT - Host can't communicate with guest but guest has access to all host's adapters Host only - Separate adapter but guest has no net access Bridged - bridge an adapter in the host with the virtual adapter to give the host access to the host adapter I am trying to give my win guest internet access, but also access the host in a separate network. Bridged only works when the host is connected to the internet (this is a laptop) so when it's not connected the network is down. Thanks I appreciate your help.

  Read the article

• MacBook can't use internet, but nslookup and ping both work

  - by Joel Coehoorn

  I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

  Read the article

• Why does my MySQL remote-connection fail (VLAN)?

  - by Johannes Nielsen

  ubuntu-community! Again I have a problem with my special friend MySQL :D I have got two servers - a database-server and a web-server - who are connected via VLAN. Now I want the web-server to have remote access to the database-server's MySQL. So I created the user user in mysql.user. user's Host is xxx.yyy.zzz.9 which is the internal IP-address of the web-server. xxx.yyy.zzz.0 is the network. I also created user with Host % . As long as I use MySQL on the database-server logging in as user, everything works fine. But trying to log in as user from xxx.yyy.zzz.9 using mysql -h xxx.yyy.zzz.8 -u user -p (where xxx.yyy.zzz.8 is the database-server's internal IP), I get ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.yyy.zzz.8' (110) So I tried to activate Bind-Address in the my.cnf file. Well, if I use xxx.yyy.zzz.8, nothing changes. But if I try xxx.yyy.zzz.9 and try to restart MySQL, I get mysql stop/waiting start: Job failed to start I checked the log files and found - nothing. The database-server's MySQL doesn't even register, that the web-server tries to connect remotely. My idea is, that maybe I didn't configure the VLAN properley, even though I asked someone who actually knows such stuff and he told me, I did everything right. What I wrote into /etc/networking/interfaces is: #The VLAN auto eth1 iface eth1 inet static address xxx.yyy.zzz..8 netmask 255.255.255.0 network xxx.yyy.zzz.0 broadcast xxx.yyy.zzz.255 mtu 1500 ifconfig returns eth1 Link encap:Ethernet HWaddr xxxxxxxxxxxxxx inet addr:xxx.yyy.zzz.8 Bcast:xxx.yyy.zzz.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxxxxxx/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:241146 errors:0 dropped:0 overruns:0 frame:0 TX packets:9765 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17825995 (17.8 MB) TX bytes:566602 (566.6 KB) Memory:fb900000-fb920000 for the eth1, what is, what I configured. (This is for the database-server, the web-server looks similar). ethtool eth1 returns: Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000003 (3) drv probe Link detected: yes (This is for the database-server, the web-server looks similar). Actually I think, everything is right, but it still doesn't work. Is there someone with an idea? EDIT: I commented ou Bind-Address in my.cnf after it didn't work.

  Read the article

• Mac OS X: network disabled because security breach

  - by fireeyedboy

  Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

  Read the article

• Setting "Register this connection's addresses in DNS" using GPO

  - by ChamaraG

  Hi All, I need to get the Windows XP client machines in my network to dynamically update their DNS A records. The network is an AD domain running on Windows Server 2003 R2 servers with Win XP SP3 clients. Some machines already have the "Register this connection's addresses in DNS" check box checked and sucessfully update the DNS server. But some machines do not have this check box set and I need to set this. I read that this is possible using a GPO and I enabled the following: Computer configuration - Administrative templates - Network - DNS client Primary DNS Suffix Dynamic Update DNS Servers Connection-Specific DNS Suffix Register DNS records with connection-specific DNS suffix and where required, entered the relevant parameters. Running rsop.msc in the client machines shows that the GPO has been applied. The client machines have been rebooted. The DNS server allows "Nonsecure and secure" dynamic updates and is only accessible from our internal network. But, the "Register this connection's addresses in DNS" check box is not set. And the hosts without this set are not updating their DNS A records. Per another suggestion in a web site, i tried running "ipconfig /registerdns", but it does not add the DNS A record. Any advice on what I am doing wrong here would be gratefully accepted :-) Thank you.

  Read the article

• How to get Windows 7 to automatically connect to an ad-hoc network?

  - by George Edison

  I have two machines - one is running Ubuntu 12.04 64-bit and the other is running Windows 7 Starter Edition (32-bit). The Ubuntu machine is connected to the Internet via the eth0 interface. That machine also has a wireless network interface (wlan0) that is currently functioning as an ad-hoc network. I can connect to the ad-hoc network just fine with the Windows machine but each time I wish to do so, I must manually initiate the connection and enter the password. Is there some way to instruct Windows to automatically connect to this network (an option I have for standard wireless networks but not ad-hoc networks)?

  Read the article

• DDWRT or similar as repeater in a network.

  - by Quantumplation

  I have a friend with sever connection issues due to her wireless router being on the bottom floor of her house, and the computer being a story or two away. I have several old Linksys routers lying about, one of which is currently running DDWRT for my network. Would it be a good idea (effective) to configure one of these routers as a wireless bridge of some kind in an intermediary floor to improve her connection? Is there any specific configuration beyond the standard DDWRT setup that I would need to do? Thanks for your help. =)

  Read the article

• How to get current connection settings

  - by Peter Larsson

  SELECT name AS Setting,         CASE             WHEN @@OPTIONS & number = number THEN 'ON'             ELSE 'OFF'         END AS Value FROM    master..spt_values WHERE   type= 'SOP'         AND number > 0

  Read the article

• Network Bridging for WiFi-to-Ethernet in linux

  - by shakaran

  It is possible Network Bridging for WiFi-to-Ethernet in linux instead of Ethernet-to-Ethernet? I have a CentOS 6.3 machine. I am using KVM and I want perform a brigde for virtualize more machines. This machine is connected only via wireless connection and it doesn't have a ethernet connection. So, I did a bridge over the WiFi interface like: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE="br0" NM_CONTROLLED="yes" ONBOOT=yes TYPE=Bridge BOOTPROTO=none IPADDR=192.168.1.50 PREFIX=24 GATEWAY=192.168.1.1 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System br0" Then I edit my wireless conection like: # cat /etc/sysconfig/network-scripts/ifcfg-mywireless ESSID="mywireless" MODE=Managed KEY_MGMT=WPA-PSK WPA_ALLOW_WPA2=yes CIPHER_PAIRWISE=CCMP CIPHER_GROUP=CCMP TYPE=Wireless #BOOTPROTO=none #IPADDR=192.168.1.50 #PREFIX=24 #GATEWAY=192.168.1.1 #DNS1=8.8.8.8 #DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="Auto mywireless" UUID=874***** ONBOOT=yes LAST_CONNECT=1355923469 BRIDGE=br0 After, I restart the network: # /etc/init.d/network restart Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface Auto_mywireless: Error: Unknown connection: 874***** [FAILED] Bringing up interface br0: [ OK ] But as you can see, it show a error. My ifconfig output shows now: # ifconfig br0 Link encap:Ethernet HWaddr 6E:20:AD:CE:D8:AB inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6c20:adff:fece:d8ab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:6393 (6.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:432 errors:0 dropped:0 overruns:0 frame:0 TX packets:432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:62433 (60.9 KiB) TX bytes:62433 (60.9 KiB) ra0 Link encap:Ethernet HWaddr 00:22:F7:2B:87:E5 inet addr:192.168.1.42 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:f7ff:fe2b:87e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:46 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:487894880 (465.2 MiB) TX bytes:148136473 (141.2 MiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:5B:30:9A inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:70 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:5838 (5.7 KiB) But this doesn't give internet connection and I loss access to 192.168.1.50. So, it is possible setup this networking bridge WiFi-to-Ethernet?

  Read the article

• How can I monitor network traffic in an all Mac home network?

  - by raiglstorfer

  I have an all Mac network consisting of an Airport Extreme, 1 MacPro, 1 Mac Mini, 2 MackBook Pros, 2 iPads, and 2 iPhones. The Mac Pro is connected directly to the Airport Extreme via Cat5 and the rest is all running via Wireless. Lately I've been getting prompted by Google to enter Capchas frequently. The message states that I might have software running on my network I'm not aware of. My wireless router is password protected using WPA2 Personal and I frequently change my password so I don't think someone is using the network from outside (but I've no way to confirm this). I'm looking for a relatively cheap (preferably open source) solution that would enable me to monitor and profile the network usage by machine and port. Can someone recommend a solution?

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• VBO and shaders confusion, what's their connection?

  - by Jeffrey

  Considering OpenGL 2.1 VBOs and 1.20 GLSL shaders: When creating an entity like "Zombie", is it good to initialize just the VBO buffer with the data once and do N glDrawArrays() calls per each N zombies? Is there a more efficient way? (With a single call we cannot pass different uniforms to the shader to calculate an offset, see point 3) When dealing with logical object (player, tree, cube etc), should I always use the same shader or should I customize (or be able to customize) the shaders per each object? Considering an entity class, should I create and define the shader at object initialization? When having a movable object such as a human, is there any more powerful way to deal with its coordinates than to initialize its VBO object at 0,0 and define an uniform offset to pass to the shader to calculate its real position? Could you make an example of the Data Oriented Design on creating a generic zombie class? Is the following good? Zombielist class: class ZombieList { GLuint vbo; // generic zombie vertex model std::vector<color>; // object default color std::vector<texture>; // objects textures std::vector<vector3D>; // objects positions public: unsigned int create(); // return object id void move(unsigned int objId, vector3D offset); void rotate(unsigned int objId, float angle); void setColor(unsigned int objId, color c); void setPosition(unsigned int objId, color c); void setTexture(unsigned int, unsigned int); ... void update(Player*); // move towards player, attack if near } Example: Player p; Zombielist zl; unsigned int first = zl.create(); zl.setPosition(first, vector3D(50, 50)); zl.setTexture(first, texture("zombie1.png")); ... while (running) { // main loop ... zl.update(&p); zl.draw(); // draw every zombie }

  Read the article

• Configuring Wireless on Cisco 851W

  - by Aequitarum Custos

  Either a powersurge or something caused our router's configuration to get wiped, and our last backup was before the wireless network was setup. We have not been able to reconfigure the wireless since then, so was curious if anyone here would be able to determine what configuration is needed. We are using a Cisco 851W running 12.4(15)T9 We would like to use WPA encryption, and have it on the same network as the rest of the office network. Config file is below: User Access Verification Building configuration... Current configuration : 3857 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service dhcp ! hostname BOB ! boot-start-marker boot-end-marker ! enable secret 5 ********************* ! no aaa new-model ! ! dot11 syslog no ip source-route ! ! ip cef no ip bootp server ip domain name BOB.com ip name-server 61.11.1.1 ip name-server 61.11.1.2 ! ! ! username BOBB privilege 15 password 7 ************************* ! ! archive log config hidekeys ! ! ip tcp synwait-time 10 ! ! ! interface FastEthernet0 no cdp enable ! interface FastEthernet1 no cdp enable ! interface FastEthernet2 no cdp enable ! interface FastEthernet3 no cdp enable ! interface FastEthernet4 description WAN Connection$ETH-WAN$ ip address 61.11.1.14 255.255.254.0 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable ! interface Dot11Radio0 no ip address shutdown ! encryption mode ciphers tkip speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root no cdp enable ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no cdp enable bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.20 ip access-group Guest-ACL in no cdp enable ! interface Vlan1 description Internal Network ip address 192.168.2.60 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 61.11.2.14 ! ip http server no ip http secure-server ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended Guest-ACL deny ip any 192.0.0.0 0.0.0.255 permit ip any any ! access-list 1 permit 192.0.0.0 0.0.0.255 access-list 100 remark SDM_ACL Category=2 access-list 100 permit ip 192.0.0.0 0.0.0.255 any no cdp run ! control-plane ! !

  Read the article

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• Windows XP unknown location popup annoyance

  - by mcgyver5

  I'm plagued by a popup from Windows XP when I use wireless. It says, "You are in an Unknown Location..." It always pops above whatever window I'm using, but does not take focus, so while it does not interrupt my typing, it gets in the way and I can't dismiss it with a keystroke. I'd like to find a way to disable this popup. I've searched in control panel -- Network Connections. I'm not referring to "balloon tips" that appear related to the wireless connection in a new location.

  Read the article

• Nec USB 3.0 controller drops connection - Ubuntu 12.04.1

  - by Tom

  I have some serious problems with Technaxx pci-e 302p card. It has uPD720200a NEC chip with 4020 firmware. BIOS recognises it. Sometimes it recognises devices and system mounts them and are functional for few minutes, other times they can't be mount and error occours. After fresh install card worked fine, but after kernel and firmware update it behaves as mentioned. Outputs: uname -a Linux asd-GA-MA770-UD3 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lspci -vvv USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fd8fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 07d1:3c0a D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT3072] Bus 005 Device 004: ID 1997:1221 Bus 005 Device 003: ID 15c2:003c SoundGraph Inc. lsmod Module Size Used by nls_iso8859_1 12713 0 nls_cp437 16991 0 vfat 17585 0 fat 61512 1 vfat vesafb 13844 1 saa7134_alsa 18602 1 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep tda827x 18182 1 snd_hda_codec_hdmi 32474 1 ir_lirc_codec 12859 0 lirc_dev 19204 1 ir_lirc_codec tda8290 22616 1 arc4 12529 2 snd_hda_codec_realtek 224173 1 ir_mce_kbd_decoder 12777 0 ir_sony_decoder 12510 0 ir_jvc_decoder 12507 0 tuner 27428 1 ir_rc6_decoder 12507 0 snd_hda_intel 33773 5 rt2800usb 22684 0 rt2800lib 58925 1 rt2800usb crc_ccitt 12667 1 rt2800lib rt2x00usb 20762 1 rt2800usb rt2x00lib 51144 3 rt2800usb,rt2800lib,rt2x00usb mac80211 506816 3 rt2800lib,rt2x00usb,rt2x00lib ir_rc5_decoder 12507 0 rc_avermedia_m135a 12526 0 rc_imon_pad 12505 0 ir_nec_decoder 12507 0 cfg80211 205544 2 rt2x00lib,mac80211 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_ctxfi 111202 2 snd_hwdep 13668 1 snd_hda_codec imon 32839 0 snd_pcm 97188 5 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_ctxfi snd_seq_midi 13324 0 saa7134 181851 1 saa7134_alsa videobuf_dma_sg 19354 2 saa7134_alsa,saa7134 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi joydev 17693 0 rc_core 26412 13 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_avermedia_m135a,rc_imon_pad,ir_nec_decoder,imon,saa7134 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 101 videobuf_core 26390 2 saa7134,videobuf_dma_sg v4l2_common 16454 2 tuner,saa7134 videodev 98259 3 tuner,saa7134,v4l2_common sp5100_tco 13791 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 28 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_ctxfi,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device v4l2_compat_ioctl32 17128 1 videodev tveeprom 21249 1 saa7134 i2c_piix4 13301 0 soundcore 15091 1 snd edac_core 53746 0 serio_raw 13211 0 snd_page_alloc 18529 3 snd_hda_intel,snd_ctxfi,snd_pcm edac_mce_amd 23709 0 wmi 19256 0 mac_hid 13253 0 ppdev 17113 0 parport_pc 32866 1 k10temp 13166 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usb_storage 49198 0 uas 18180 0 usbhid 47199 0 hid 99559 1 usbhid firewire_ohci 41000 0 firewire_core 63558 1 firewire_ohci crc_itu_t 12707 1 firewire_core floppy 70365 0 pata_atiixp 13204 2 r8169 62099 0 dmesg | tail after plugging to usb 3.0 port [ 834.871296] sd 9:0:0:0: rejecting I/O to offline device [ 834.871308] sd 9:0:0:0: rejecting I/O to offline device [ 834.871319] sd 9:0:0:0: rejecting I/O to offline device [ 834.871330] sd 9:0:0:0: rejecting I/O to offline device [ 834.871530] sd 9:0:0:0: [sdd] Unhandled error code [ 834.871536] sd 9:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 834.871545] sd 9:0:0:0: [sdd] CDB: Read(10): 28 00 0e 8e 48 0a 00 00 3e 00 [ 834.871564] end_request: I/O error, dev sdd, sector 244205578 [ 834.875497] sd 8:0:0:1: Device offlined - not ready after error recovery [ 834.885339] usb 9-2: USB disconnect, device number 2 Are there any other outputs need for answering? I'll post them ASAP. I could of course reject updating the system but I think it's halfway solution. Any help appreciated. BTW USB 2.0 and 1.1 ports run well, card itself runs under win7 as charm. Tom

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >