Search Results

Search found 3322 results on 133 pages for 'equivalent'.

Page 104/133 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Using 1920x1200 mode on SyncMaster T260HD in Linux

  - by dagorym

  I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work. The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything. I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is: ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is Section "Monitor" Identifier "Monitor0" ModelName "SyncMaster" DisplaySize 518 324 HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "dpms" ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync EndSection I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem. Any suggestions on other things I should try or might be missing? If anyone's gotten this to work I'd love to know. Thanks.

  Read the article

• Solaris SMF to Upstart on RHEL6

  - by aaa90210

  I am planning a migration from Solaris/x86 to RHEL6. Part of this migration will be migrating services from SMF to the RHEL6 equivalent, which appears to be upstart. While init.d scripts still seem to be supported, I want to take advantage of a more sophisticated init daemon, especially for features like job supervision (restarting etc). I would like to gather some thoughts on a few points: 1) Is upstart an adequate job supervisor, i.e. does it preclude the need for stand-alone managers like daemontools/supervise? 2) Upstart scripts seem very bare-bones compared to a typical init.d script. If I was porting an init.d script to Upstart, is it OK to just "exec /etc/init.d/myjob start"? This include RHEL installed programs like httpd. 3) Does upstart do anything is regards to pid files, and what are it's expectations in regards to the forking model of the process? 4) Are there any straightforward guides to the process management aspect of Upstart...and by that I mean the conditions around controlling restarting? e.g. how many times to restart the process before it goes into a maintenance state, or to ignore errors/core dumps in child processes of the supervised process. Any other relevant ideas or guides would be appreciated. TIA

  Read the article

• See former key sequences in vim

  - by Vasiliy Sharapov

  Sometimes I share screen shots and clips of vim usage with others. It would be nice to expand on the part of the status bar highlighted in this picture: I would like some way to make previous key sequences visible as well, such as: y2w jj f[ p 2d - You can see the key sequences leading up to the current one. I'll elaborate on my wish list at the bottom. Is something like this is available as a plugin or vim script? The sheer number of scripts available on vim online makes this hard to find by keyword. Some features I would hope for (but seem improbable): Delimit key sequences with a non-keyboard character instead of space, and a different one for the current command, so y2w jj f[ p 2d might become y2w¦jj¦f[¦p » 2d Replace keys that have a letter alternative with the alternative, such as the right arrow key - ^[[C with the equivalent l. Edit: To clarify, the right arrow key is a valid key in vim, but has no character to represent it, the l key preforms the same function and could/should substitute it. Have previous keystrokes run all the way to the beginning of the line (instead of just one or two), and just have vim's command prompt overwrite it when necessary. Replace some keystrokes with a more elegant alternative, for example hhhhh with 5h or more impressively d2f) with d% (in the appropriate situation).

  Read the article

• How do you monitor SSD wear in Windows when the drives are presented as 'generic' devices?

  - by MikeyB

  Under Linux, we can monitor SSD wear fairly easily with smartmontools whether the drive is presented as a normal block device or a generic device (which happens when the drive has been hardware RAIDed by certain controllers such as the one on the IBM HS22). How can we do the equivalent under Windows? Does anyone actually use smartmontools? Or are there other packages out there? The problem is that SCSI Generic devices just don't show up in Windows. If the drives aren't RAIDed we can see them fine. How I'd do it in Linux: sles11-live:~ # lsscsi -g [1:0:0:0] disk SMART USB-IBM 8989 /dev/sda /dev/sg0 [2:0:0:0] disk ATA MTFDDAK256MAR-1K MA44 - /dev/sg1 [2:0:1:0] disk ATA MTFDDAK256MAR-1K MA44 - /dev/sg2 [2:1:8:0] disk LSILOGIC Logical Volume 3000 /dev/sdb /dev/sg3 sles11-live:~ # smartctl -l ssd /dev/sg1 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32.49-0.3-default] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Device Statistics (GP Log 0x04) Page Offset Size Value Description 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 26~ Percentage Used Endurance Indicator |_ ~ normalized value sles11-live:~ # smartctl -l ssd /dev/sg2 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32.49-0.3-default] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Device Statistics (GP Log 0x04) Page Offset Size Value Description 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 3~ Percentage Used Endurance Indicator |_ ~ normalized value

  Read the article

• locked files on HFS+ home partition shared between OSX/Linux

  - by HazyBlueDot

  I dual boot into Arch Linux and OS X 10.6 on my MacBook pro. I synced my UID between both OSes and created an HFS partition (with no journaling) to use as a shared home/Users partition. For the most part it works just as I'd expect, but sometimes when I'm booted into OS X certain files are "locked" (when I get info on a particular file the "Locked" box is checked under the "General" pane. I can resolve the issue by manually unchecking the box) and/or I get "Operation not permitted" when I try deleting or chmod'ing a file. In both cases I don't see anything out of the ordinary on the permission bits displayed with ls -l, except for a trailing '@' character in the position where the sticky bit would normally occur: -rw-r--r--@ 1 myuser mygroup 296 Mar 29 11:44 myfile This '@' character shows up on ALL normal files, so doesn't seem to be linked to the locked/operation not permission situation. On the Linux side of things I never have permission problems. To the best of my limited knowledge and experience with ACLs I've not found any ACLs on any of the files in question. For what it's worth, I do most of my file editing using emacs (Aquamacs in OSX), is it possible it is setting weird permission bits? What is the "locked" setting that OS X uses and does it have a permission bit equivalent (so at the very least I could recursively unlock all files in my home directory from the terminal) why might some, but not other files get "locked" when booting into OS X what is the meaning of the '@' character?

  Read the article

• SSH client and Command Prompt replacements Windows look-and-feel

  - by Oddthinking

  The Problem I've worked exclusively in Windows. I can handle that. I've worked exclusively in DOS (a long time ago!). I can handle that. I've worked exclusively in Unix. I can handle that. Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY. I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux). My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY). My productivity drops dramatically when I cannot hit Undo, Home or End. The Solution I am Seeking An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them. Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface. I appreciate there may need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them. I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.) I know there are many SSH clients, but I am looking for advice for a particular need. PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite. Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?

  Read the article

• Streaming to PS3 with NAS and built-in dlna server?

  - by philt

  With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

  Read the article

• Single Sign On for intranet with Apache and Linux MIT Kerberos

  - by Beerdude26

  Greetings, I am looking for a way to do a single sign on to an intranet in the following manner: A Linux user logs on via a graphical frontend (for example, GNOME). He automatically requests a TGT for his username from the MIT Kerberos KDC. Via some way or another, the Apache server (which we'll assume is on the same server as the KDC), is informed that this user has logged in. When the user accesses the intranet, he is automatically granted access to his web applications. I don't think I've seen this kind of functionality while searching the net. I know the following possibilities exist: Using an authentication module such as mod_auth_kerb, a user is presented with a login prompt to enter his username and password, which are then authenticated against the MIT Kerberos server. (I would like this to be automatic.) IIS supports integrated Windows logon via ASP.Net when the user is part of an Active Directory. (I'm looking for the Linux / Apache equivalent.) Any suggestions, criticism and ideas are highly appreciated. This is for a school project to show a proof-of-concept, so every handy piece of information is more than welcome. :)

  Read the article

• [SOLVED] Single Sign On for intranet with Apache and Linux MIT Kerberos

  - by Beerdude26

  EDIT: SOLVED! See my answer below. Greetings, I am looking for a way to do a single sign on to an intranet in the following manner: A Linux user logs on via a graphical frontend (for example, GNOME). He automatically requests a TGT for his username from the MIT Kerberos KDC. Via some way or another, the Apache server (which we'll assume is on the same server as the KDC), is informed that this user has logged in. When the user accesses the intranet, he is automatically granted access to his web applications. I don't think I've seen this kind of functionality while searching the net. I know the following possibilities exist: Using an authentication module such as mod_auth_kerb, a user is presented with a login prompt to enter his username and password, which are then authenticated against the MIT Kerberos server. (I would like this to be automatic.) IIS supports integrated Windows logon via ASP.Net when the user is part of an Active Directory. (I'm looking for the Linux / Apache equivalent.) Any suggestions, criticism and ideas are highly appreciated. This is for a school project to show a proof-of-concept, so every handy piece of information is more than welcome. :)

  Read the article

• Juniper NetScreen NS-5GT traffic monitoring

  - by blah

  I've done casual research into the subject and am truly dismayed at the lack of compatible tools for such a simple task. Maybe someone can provide assistance. We have a NetScreen NS-5GT in the office. I need to be able to get a glance of current traffic per endpoint -- I think the equivalent of 'get sessions' with byte counts/rates. I don't care about bars, graphs, and reports. Something as simple as a classic software firewall display would be perfect. I can't shell out money on something real like SolarWinds products, so a free solution is essential. I'm willing to do a little work but refuse to program something from scratch. It's not prudent right now for me to install a hub or otherwise mess around physically. There must be something out there I can use, maybe in combination. I don't believe I'm asking too much. Specific answers only please, e.g. monitoring software you know will actually work with this antiquated device. I've read about general approaches to the broader problem dozens of times already.

  Read the article

• iis7 large worker process request queue creating process blocking aspnet.config & machine.config amended (bottleneck)

  - by scott_lotus

  ASP.net 2.0 app .net 2.0 framework IIS7 I am seeing a large queue of "requests" appear under the "worker process" option. State recorded appear to be Authenticate Request and Execute Request Handles more than anything else. I have amended aspnet.config in C:\Windows\Microsoft.NET\Framework64\v2.0.50727 (32 bit path and 64 bit path) to include: maxConcurrentRequestsPerCPU="50000" maxConcurrentThreadsPerCPU="0" requestQueueLimit="50000" I have amended machine.config in C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG (32 bit and 64 bit path) to include: autoConfig="true" maxIoThreads="100" maxWorkerThreads="100" minIoThreads="50" minWorkerThreads="50" minFreeThreads="176" minLocalRequestFreeThreads="152" Still i get the issue. The issue manifestes itself as a large number of processes in the Worker Process queue. Number of current connections to the website display 500 when this issue occurs. I dont think i have seen concurrent connections over 500 without this issue occurring. Web application slows as the request block. Refreshing the app pool resolves for a while (as expected) as the load is spread between the two pools. Application pool in question FIXED REQUEST have been set to refresh on 50000. Thank you for any help. Scott quick edit to say hmm, my develeopers are telling me the project was built with .net 3.5 framework. Looking at C:\Windows\Microsoft.NET\Framework64\v3.5 there does not appear to be a ASPNET.CONFIG or a MACHINE.CONFIG .... is there a 3.5 equivalent ? after a little searching apparenetly 3.5 uses the 2.0 framework files that 3.5 is missing. So back to the original question , where is my bottleneck ?

  Read the article

• Convert Mac font to Windows format?

  - by Moshe

  I have a font that was used on Mac OS X 10.5. Mac recognizes it as a font file. Windows Vista shows it as a "File". Changing the file extension doesn't work. I tried both .otf and .ttf and neither worked. (Surprise! I didn't thinks so, but I'd be a fool for asking if that was the answer, so I tried...) Perhaps I need to try a different extension? Are there any utilities to convert the font? A Windows equivalent? It's called Franco. (FrancoNormal, actually.) Thanks. EDIT: DFontSplitter didn't work. I saw something online about "data fork" and "resource fork" that has to match up. Can someone please explain that? Do I need both for a font conversion? What do I tell my graphic designer to send me? EDIT 2: The font doesn't work when downloaded to Mac OS X either. (A different machine from the original.) "Get Info" reveals that there is no file extension, leading me to believe that this is the newer font format. Where wold I find the the "data fork" and "resource fork" on the Mac? I want to be able to tell the designer exactly where to look. EDIT 3: DFontSplitter works on the original computer but not on my PC. I converted and emailed myself the fonts from the graphic designers laptop. I guess it has to do with the data being stored in a "fork" whatnot. Thanks, Matt for that article. Thank you again for your help!

  Read the article

• HTML tabindex: Put some links last without complete enumeration

  - by Emanuel Berg

  I know I can use the HTML anchor attribute tabindex to set the tabindex of links, i.e., in what order they get focused when the user hits Tab (or Shift-Tab). But, I have a home page with tons of links, and to enumerate all those is a lot of work. The actual case is, I have four image links that by default gets index 1, 2, 3, and 4 (well, the behavior is equivalent, at least). But, I'd much rather have the first non-image link as number 1. Check it out here and you'll understand immediately. I tried to give the first non-image link (the link I desire to have tabindex 1) - I tried to give it tabindex 1 explicitly, hoping that it would cascade from there, but it didn't (i.e., the first image link got implicit tabindex 2). I also tried to give the image links ridiculously high tabindexes, but that didn't work: as the other links didn't have tabindexes at all, those highs were still "first". As a last resort (the solution currently employed) I gave the image links all tabindex -1. That makes for logical tabbing, but, it is suboptimal, as those image links are excluded from the tab loop - a user tabbing away will probably never realize that the images are clickable. I'd like them to be reachable with tabbing, but last, after all the ordinary links. If you wonder why I'm so determined to achieve this, it has to do with my own finger habits: I almost exclusively search for links, tab back, tab forth, etc., and very seldom using the mouse. Note: I'll accept a script to change the actual HTML for a complete enumeration, if you convince me there is no "set" way to solve this problem.

  Read the article

• How to get gigabit network speeds on Windows XP?

  - by JB

  We've just installed gigabit switches at work, and things on the Linux side are going well. Our linux boxes, which use a Intel Corporation 82566DM-2 Gigabit nic (according to lspci), consistently get over 900 mbits/sec: iperf -c ipserver ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.40.9 port 39823 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.08 GBytes 929 Mbits/sec We have a bunch of Windows XP 64-bit machines that use Broadcom NetXtreme 57xx cards. I spent around a day trying to get equivalent speeds on them, but couldn't get above 200 Mbits/sec. I noticed the Windows iperf tests said that the TCP window size was 8 Kb by default (as opposed to 16 Kb on Linux, so I modified my test to reflect that. Still no love. I went to Broadcom's site, downloaded the latest drivers for the card and installed. Still no love. However, finally, I tried a 64 Kb window size with the new drivers, and finally an improvement! $ iperf -c ipserver -w64k ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 64.0 KByte ------------------------------------------------------------ [ 3] local 192.168.40.214 port 1848 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 933 MBytes 782 Mbits/sec Much better, but still not really taking advantage of the full capabilities of the network. If the Linux box can reach 950 Mbits/sec consistently, this box should be able to as well. Also, if you're wondering about the medium, this is over the same cable...I'm switching back and forth. Any suggestion or ideas would be really welcome. Thanks!

  Read the article

• Use one NIC to create multiple interfaces for Linux KVM

  - by Phanto

  I am working on a thesis research project, and I am having some difficulty figuring out how to make one NIC spawn several "bridge" interfaces such that each KVM VM can be seen on the local network. I am very new to KVM, and am still exploring what it can do. Below is the scenario that I am attempting to make (on a CentOS/RHEL 6 system): Linux KVM Host has 1 NIC (eth0) connected to a switch. Create multiple "bridge" or equivalent interfaces that are spawned off of eth0 that would provide a unique IP for each VM. This is so that each VM can communicate with other hosts on the network, and that other hosts on the network can communicate with the VM. IMPORTANT: I would like iptables on the KVM host to be able to manipulate/control/restrict the traffic that would be sent on those "bridge" interfaces. I would like to create a minimum of three VM's, each using their own unique "bridge" interfaces. I have previously made a br0 interface off of eth0, but unfortunately, I am unable to add any more to it. It appears that you can only bridge 1 interface to the NIC. I would like to bridge many to one. Would a tap device be able to do this? If so, how would it be set up? Effectively, I am attempting to replicate what can easily be created with VirtualBox on Windows, where each VM is given a "bridged" interface, and can live on the network. I want to achieve this very same thing with Linux KVM. Thank You EDIT: To be more descriptive, I want to achieve something that looks like this: This can be found on this page: http://en.gentoo-wiki.com/wiki/KVM#Networking_2 HOST +---------------+ | | KVM GUEST1 | | +--------------+ | +------+ | | | LAN ---+--- eth0 | +--+---+---- nic0 | KVM GUEST2 | | tap0----+ | |192.168.1.13 | +--------------+ | | tap1----+ | +--------------+ | | | +------+ | | | | | br0 +--+----------------------+---- nic0 | |192.168.1.12 | |192.168.1.14 | +---------------+ +--------------+

  Read the article

• How can I tell SELinux to give vsftpd write access in a specific directory?

  - by Arcturus

  Hello. I've set up vsftpd on my Fedora 12 server, and I'd like to have the following configuration. Each user should have access to: his home directory (/home/USER); the web directory I created for him (/web/USER). To achieve this, I first configured vsftpd to chroot each user to his home directory. Then, I created /web/USER with the correct permissions, and used mount --bind /web/USER /home/USER/Web so that the user may have access to /web/USER through /home/USER/Web. I also turned on the SELinux boolean ftp_home_dir so that vsftpd is allowed to write in users' home directories. This works very well, except that when a user tries to upload or rename a file in /home/USER/Web, SELinux forbids it because the change must also be done to /web/USER, and SELinux doesn't give vsftpd permission to write anything to that directory. I know that I could solve the problem by turning on the SELinux boolean allow_ftpd_full_access, or ftpd_disable_trans. I also tried to use audit2allow to generate a policy, but what it does is generate a policy that gives ftpd write access to directories of type public_content_t; this is equivalent to turning on allow_ftpd_full_access, if I understood it correctly. I'd like to know if it's possible to configure SELinux to allow FTP write access to the specific directory /web/USER and its contents, instead of disabling SELinux's FTP controls entirely.

  Read the article

• MacBook Pro (OSX Lion) - shutdown automatically before reaching login screen

  - by mkk

  When I try to lunch my MacBook Pro I can see a progress bar on loading screen. It goes to 1/15 or something like this and then it shut downs - I cannot reach even login screen. It happened to me 2 months ago, I have 'fixed' this by formatting my hard drive and installing OSX (Lion) again. This time I think that situation is a little bit different - I am able to enter single-user mode by pressing cmd + s. I then type /sbin/fsck -yf, I get the error: ** Checking Journaled HFS Plus volume. The volume name is Macintosh HD ** Checking extents overflow file. ** Checking catalog file. Invalid node structure (4, 24704) ** The volume Macintosh HD could not be verified completely. /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8 but when I type exit, I can the login screen and I can log in. I tried a lot of things, booting from recovery partition and choosing disk utility to repair the disc, but I get error that it cannot be repaired. I have googled for hours and the only real solution I have found was to buy Disc warrior that might fix the issue. Any other suggestions? Secondary question is what causes this issue? I thought the reason are bad sectors, but Smart Utility haven't found any. I found suggestion that RAM could cause this kind of issue as well, so I downloaded rember and made memory test - all tests passed. Right now I have used my solution of entering single-mode user and then typing exit, however I am not sure how long it will 'work'. Of course I have back-uped what I considered important. Thanks for the help in advance! UPDATE: I guess Smart Utility was not very useful, I mnaged to get input/output error, which I believe is equivalent to bad sector.

  Read the article

• Backup solution, or, how Duplicati duped me

  - by blarghmaster

  TL/DR version: Mono + Duplicati.commandline.exe restore etc. etc. spits this out for several files regardless of what I try. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Any advice here, or an idea of where to look for a better solution? FULL STORY: Ive recently put together an nice clean, friendly backup solution for several servers, predominantly Linux, but occasionally a windows box is added too. The solution as is meets all my requirements and does it well... save 1: cross-compatibility The solution is based on a combination of several elements, but eventually comes done to using Duplicity and Duplicati for the actual storage of files. The entire solution was ready to go before i realized that Duplicati, does not, in fact allow me to restore my files to a Linux box, regardless of what the commandline under Mono might tell you. It just spits out errors on random zip and image files, for apparently no good reason as i have tried several options to get it to restore, and several versions of Mono including installing it pretty much lib-for-lib. There is no effective log file for the reasons for these errors, and even the "--debug-output=true" flag does nothing. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Now i could most likely use the friendly instructions on Duplicati's site and script a bash equivalent of the restore, but that's not exactly ideal. Any advice on this? or possibly an alternative solution that presents the same benefits of Duplicati/Duplicity but that actually works across platforms?

  Read the article

• Fully FOSS EMail solution

  - by Ravi

  I am looking at various FOSS options to build a robust EMail solution for a government funded university. Commercial options are to be chosen only in the worst case scenario. Here are the requirements: Approx 1000-1500 users - Postfix or Exim? (Sendmail is out;-)) Mailing lists for different groups/Need web based archive - Mailman? Sympa? Centralised identity store - OpenLDAP? Fedora 389DS? Secure IMAP only - no POP3 required - Courier? Dovecot? Cyrus?? Anti Spam - SpamAssasin? what else? Calendaring - ?? webmail - good to have, not mandatory - needs to be very secure...so squirrelmail is out;-)? Other questions: What mailbox storage format to use? where to store? database/file system? Simple and effective HA options? Is there a web proxy equivalent to squid in the mail server world? software load balancers?CARP? Monitoring and alert? Backup? The govt wants to stimulate the local economy by buying hardware locally from whitebox vendors. Also local consultants and university students will do the integration. We looked at out-of-the-box integrated solutions like Axigen, Zimbra and GMail but each was ruled out in favour of a DIY approach in the hopes of full control over the data and avoiding vendor lockin - which i though was a smart thing to do. I wish more provincial governments in the developing world think of these sort of initiatives As for OS - Debian, FreeBSD would be first preference. Commercial OS's need not apply. CentOS as second tier option...

  Read the article

• Performance monitoring on Linux/Unix

  - by ervingsb

  I run a few Windows servers and (Debian and Ubuntu) Linux and AIX servers. I would like to continously monitor performance on these systems in order to easily identify bottlenecks as well as to have an overview of the general activity on the servers. On Windows, I use Windows Performance Monitor (perfmon) for this. I set up these counters: For bottlenecks: Processor utilization : System\Processor Queue Length Memory utilization : Memory\Pages Input/Sec Disk Utilization : PhysicalDisk\Current Disk Queue Length\driveletter Network problems: Network Interface\Output Queue Length\nic name For general activity: Processor utilization : Processor\% Processor Time_Total Memory utilization : Process\Working Set_Total (or per specific process) Memory utilization : Memory\Available MBytes Disk Utilization : PhysicalDisk\Bytes/sec_Total (or per process) Network Utilization : Network Interface\Bytes Total/Sec\nic name (More information on the choice of these counters on: http://itcookbook.net/blog/windows-perfmon-top-ten-counters ) This works really well. It allows me to look in one place and identify most common bottlenecks. So my question is, how can I do something equivalent (or just very similar) on Linux servers? I have looked a bit on nmon (http://www.ibm.com/developerworks/aix/library/au-analyze_aix/) which is a free performance monitoring tool developed for AIX but also availble for Linux. However, I am not sure if nmon allows me to set up the above counters. Maybe it is because Linux and AIX does not allow monitoring these exact same measures. Is so, which ones should I choose and why? If nmon is not the tool to use for this, then what do you recommend?

  Read the article

• internet-based sync software that will keep running after Windows Live Sync stops doing PC-to-PC-syncs?

  - by Warren P

  According to the wikipedia page, Microsoft Live Sync will shortly stop offering the PC-to-PC sync service. There are lots of apps to sync two PCs on the same LAN, but I want to sync two PCs that are in different cities, across the internet, traversing two different NATs, and that requires some kind of service running in the internet that both connect into. There is already a few questions about syncing folders and files, but this is not a duplicate because none of them answer this basic question: Microsoft Live Sync works better than RSYNC, or any of the linked SYNC solutions in any of the "not really duplicates" because it works even when the two PCs have NAT and firewalls between them that forbid direct connectivity, because Windows Live Sync has a free always-on internet server that all the client PCs connect into. I'm looking for a FREE (no-fees) Microsoft Live Sync work-alike PC-to-PC sync solution that works between PCs and Macs, at least, as well as between PCs, and works behind NAT and firewalls at least as well as Microsoft's solution. (Note that Microsoft's solution makes only outbound socket calls to a microsoft server, so this solution must necessarily include a server-hub component that is hosted publically on a free site and which does not require that I set up and manage and pay for my own public internet hosting site) Hint: None of the answers in the linked duplicate are equivalent (PureSync,FreeFileSync,BestSync 2010,SyncButler,Comodo BackUp,QuickShadow,Gbridge) in that none of them work for the PC to Mac situation, where firewalls and nats prevent direct connection, or else they require money to be paid. When Microsoft Live Sync / Live Mesh finally kills direct PC-to-PC mode, the limitation will be that you will have to pay for more than 25 GB of cloud service, and you can then only sync PC #1 to PC #2 if you first sync to the cloud, then down to other clients. I can currently sync 100 gb of data from one computer to another, only temporarily "moving the data" through Microsoft's data servers without using up my Skydrive storage quota.

  Read the article

• Using GUI ftp on Win7 and Vista without additional software

  - by Stephen Jones

  Goal: provide a 'no-software' method for 'less technical' users to access password protect ftp location from Win7 and Vista (existing approach for WinXP works). 'No software' method to mean without installing additional software (e.g. FileZilla, WinSCP) - the solution is supplied to external non-technical users. WinXP (works): Using Windows Explorer, WinXP supports non-technical ftp access by pasting: ftp://username:[email protected] into the address bar. The remote ftp site's files / directory structure becomes available and can be copied to / from easily (in the style of local file copy / paste) by a 'less technical' user. Win7 / Vista (doesn't work): Pasting the same URL into the Windows Explorer on Win7 or Vista causes an error: An error occurred opening that folder on the FTP server. Make sure you have permission to access that folder. Details: The connection with the server was reset. Notes: a) The same username/password/server typed from the (DOS) command line achieves access to the server, but this is a more 'technical' solution than desired. I am looking for a WinXP equivalent solution. b) Under 'Control Panel' / 'Internet options' / 'Advanced' tab - the boxes for 'Enable FTP folder view' and 'Use Passive FTP' are ticked (enabled) c) Adding an inbound firewall rule for local port 20 (TCP) was attempted with no difference in results (i.e. failure)

  Read the article

• Postfix spool on ext3 optimiziations in >=linux-2.6.34 days

  - by Luke404

  Given the very specific nature of the subject (we're not talking about mailboxes, just the spool; we're not talking about other filesystems, just ext3; and so on...) and the maturity of the softwares involved (linux kernel, ext3fs, postfix) I'd think there should be a more or less agreed on set of best practices to filesystem related tuning. I'm trying to get a roundup of them: data=journal became the default in recent kernels (somewhere around 2.6.30 IIRC) so we should be ok with that Wietse Venema says atime must be on, but Postfix documentation recommendsnoatime while talking about the Incoming Queue. Does that mean that postfix needs atime on just for some queue directories and will benefit from noatime on the others? can we use noatime if we just don't use ETRN? filesystem can be mounted nodev,noexec,nosuid - no* won't prevent you from setting attributes (postfix uses exec attr) they just won't have any effect (we don't run anything from the spool) the fsync() issue cited by Wietse and/or the chattr -S are probably linked to sync/async options of ext3fs but I do not understand them enough. Mouting the filesystem with async option is equivalent to chattr -R -S the whole fs? Seems like it will increase performance, but will that pose a risk of "loss of mail after a system crash" or is it really "safe on /var/spool/postfix" ? would you tune anything else on postfix-2.6.x to work better on ext3 or do you leave defaults everywhere? is there a "best" linux I/O scheduler for this kind of workload (namely CFQ or deadline?) or that's something that will vary too much based on hardware configuration? would you tune anything else in the filesystem or in the kernel? anything else? References: Postfix Performance here on SF Postfix documentation about the Incoming Queue Wietse Venema in Best file system on [email protected] here Postfix and ext3 on [email protected] here and there

  Read the article

• Do entries in local 'hosts' files override both forward and reverse name lookups?

  - by Murali Suriar

  If I have the following entries in a hosts file: 192.168.100.1 bugs 192.168.100.2 daffy.example.com 192.168.100.3 elmer.example.com. Will IP-name resolution attempts by local utilies (I assume using 'gethostbyaddr' or the Windows equivalent) honour these entries? Is this behaviour configurable? How does it vary between operating systems? Does it matter whether the 'hosts' file entries are fully qualified or not? EDIT: In response to Russell, my test Linux system is running RHEL 4. My /etc/nsswitch.conf contains the following 'hosts' line: hosts: files dns nis If I ping any of my hosts by name (e.g. bugs, daffy), the forward resolution works correctly. If I traceroute any of them by IP address, the reverse lookup functions as expected. However, if I ping them by IP, ping doesn't appear to resolve their host names. My understanding was that Linux ping would always attempt to resolve IPs to names unless instructed otherwise. Why would traceroute be able to handle reverse lookups in hosts files, but ping not?

  Read the article

• Being a more attractive job candidate - Certs XOR Degree

  - by Zephyr Pellerin

  I'm currently working in an IT position, where I do helpdesk stuff, and predominantly security related issues/consulting (In the loosest sense of the term) In-House and for Service-Contract clients (as the only/acting CCSP [I guess I should say only person with Cisco experience] in my organization). I've professionally written Kernel Mode drivers for a gaming company. Among other things that I'm proud to put on a resume. I think of myself as very reasonably qualified as a System Administrator, With excellent Cisco experience, among other things I think would make a good addition to almost any IT staff in need of a new employee. However, Something has always tripped me up - Human Resources. Let me explain, I decided to skip the university route - I'm immensely glad that I did, The computer science graduates that I've met and work with rarely know much of anything about Computers (Until they gain some 'real' experience), Even when asked about Theoretical Computing fundamentals they can rattle something off about Turing Completeness but rarely do they understand the mathematical underpinnings. In short, I think instead of going to college, I'd rather pick up some real world experience. However, Apparently, Employers rarely think the same way. A quick perusal of jobs through the standard job search engine yields nothing short of a conspiracy to exclude anyone without 'A Bachelors Degree in Computer Science or Equivalent'. Interviews I've had in the past have almost always been entangled with - 1. My Age (Which I can't really change) and 2. Lack of Degree. Employers frequently disregard the CCNA/CCSP, The experience I've gained through internships, My extensive experience in x86 assembly and C, among so many other things I like to think are valuable to employers - In lieu of the fact that I don't have a piece of paper. So, AS AN EMPLOYER - Is it even worth working on my CCIE? Or should I pad my resume with certifications that are easier to acquire (Like CISSP, MSCE, Network+, etc.). Or should I ditch the whole idea and head back to get a Mathematics or CS degree?

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >