Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 104/379 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • Why is my HP TouchSmart tx2 1025dx shutting down?

    - by Kristy
    I'm having an issue with my HP tx2 1025dx laptop. Sometimes it will spontaneously shut itself off. First, the screen will go out. Next, the computer itself will shut down. This usually occurs when I am doing something that requires a lot of resources, but lately can happen when I am doing something as simple as using an Office app. I think it may be heat related, if I try to boot the laptop after it shuts itself down, it will shut itself down again before startup is complete. If I let it cool down for a while and then come back to it, the computer will boot properly. These shutdowns are always accompanied by high temperatures on the bottom right side, as well as the right side of the keyboard. I am using a laptop cooler with two fans, and it is not making a bit of difference. This is the second TouchSmart we have owned, the first one had the same issues, we sent it in to HP after it finally refused to reboot. They “fixed” it, and it worked fine for about a month before doing the exact same thing. Unfortunately we had bought the second one before the issues began with the original, if I had known this would be a problem, I would not have purchased another TouchSmart. This particular laptop we have had for more than a year and it didn’t start these issues until a couple of months ago. Any suggestions as to how to fix this problem?

    Read the article

  • What is wrong with my home network? (Routing and connection issues)

    - by David
    I have a corporate laptop that was provided to me by a client and I'm having some rather odd difficulties with it when I put the laptop on my home network. When I first brought the machine home it behaved like any other laptop. Once it was connected to the network it was assigned an IP address and I could remote into it just fine using the machine name. Lately though, whenever I put this laptop on my network I am not able to ping or RDP into the machine as the host name doesn't properly resolve. Additionally I'm able to see the device and it's assigned IP address clearly in my router firmware. This gets even more strange as now when I try to ping it's IP address listed in my router, I see that it's actually trying to ping my own machine (screenshot of this very odd event below). This has actually driven me crazy to the point that I have actually replaced my router (it was behaving oddly in other ways), and I'm continuing to have these problems. The above ping capture is from the new router. As far as network goes I am now currently using an NetGear R7000 Nighthawk and I haven't customized any of the networking settings in the router just yet (installed yesterday). I would appreciate any advice possible and would be happy to provide further diagnostic information. Networking isn't my strong suit, so I'm not even sure where to begin unraveling this thing.

    Read the article

  • mysql: Cannot load from mysql.proc. The table is probably corrupted

    - by Alex
    Mysql was started: /usr/bin/mysqld_safe --datadir=/srv/mysql/myDB --log-error=/srv/mysql/logs/mysqld-myDB.log --pid-file=/srv/mysql/pids/mysqld-myDB.pid --user=mysql --socket=/srv/mysql/sockets/mysql-myDB.sock --port=3700 but when I'm trying to do something: ERROR 1548 (HY000) at line 1: Cannot load from mysql.proc. The table is probably corrupted How to fix it? $ mysql -V mysql Ver 14.14 Distrib 5.1.58, for debian-linux-gnu (x86_64) using readline 6.2 $ lsb_release -a Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric $ sudo mysql_upgrade -uroot -p<password> --force Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysql.columns_priv OK mysql.db OK mysql.event OK mysql.func OK mysql.general_log Error : You can't use locks with log tables. status : OK mysql.help_category OK mysql.help_keyword OK mysql.help_relation OK mysql.help_topic OK mysql.host OK mysql.ndb_binlog_index OK mysql.plugin OK mysql.proc OK mysql.procs_priv OK mysql.servers OK mysql.slow_log Error : You can't use locks with log tables. status : OK mysql.tables_priv OK mysql.time_zone OK mysql.time_zone_leap_second OK mysql.time_zone_name OK mysql.time_zone_transition OK mysql.time_zone_transition_type OK mysql.user OK Running 'mysql_fix_privilege_tables'... OK $ mysqlcheck --port=3700 --socket=/srv/mysql/sockets/mysql-my-env.sock -A -udata_owner -pdata_owner <all tables> OK UPD1: for example I'm trying to remove procedure: mysql> DROP PROCEDURE IF EXISTS mysql.myproc; ERROR 1548 (HY000): Cannot load from mysql.proc. The table is probably corrupted mysql> UPD2: mysql> REPAIR TABLE mysql.proc; +------------+--------+----------+-----------------------------------------------------------------------------------------+ | Table | Op | Msg_type | Msg_text | +------------+--------+----------+-----------------------------------------------------------------------------------------+ | mysql.proc | repair | error | 1 when fixing table | | mysql.proc | repair | Error | Can't change permissions of the file '/srv/mysql/myDB/mysql/proc.MYD' (Errcode: 1) | | mysql.proc | repair | status | Operation failed | +------------+--------+----------+-----------------------------------------------------------------------------------------+ 3 rows in set (0.04 sec) This is strange, because: $ ls -l /srv/mysql/myDB/mysql/proc.MYD -rwxrwxrwx 1 mysql root 3983252 2012-02-03 22:51 /srv/mysql/myDB/mysql/proc.MYD UPD3: $ ls -la /srv/mysql/myDB/mysql total 8930 drwxrwxrwx 2 mysql root 2480 2012-02-21 13:13 . drwxrwxrwx 13 mysql root 504 2012-02-21 19:01 .. -rwxrwxrwx 1 mysql root 8820 2012-02-20 15:50 columns_priv.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 columns_priv.MYD -rwxrwxrwx 1 mysql root 4096 2012-02-20 15:50 columns_priv.MYI -rwxrwxrwx 1 mysql root 9582 2012-02-20 15:50 db.frm -rwxrwxrwx 1 mysql root 8360 2011-12-08 02:14 db.MYD -rwxrwxrwx 1 mysql root 5120 2012-02-20 15:50 db.MYI -rwxrwxrwx 1 mysql root 54 2011-11-12 15:42 db.opt -rwxrwxrwx 1 mysql root 10223 2012-02-20 15:50 event.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 event.MYD -rwxrwxrwx 1 mysql root 2048 2012-02-20 15:50 event.MYI -rwxrwxrwx 1 mysql root 8665 2012-02-20 15:50 func.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 func.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 func.MYI -rwxrwxrwx 1 mysql root 8700 2012-02-20 15:50 help_category.frm -rwxrwxrwx 1 mysql root 21497 2011-11-12 15:42 help_category.MYD -rwxrwxrwx 1 mysql root 3072 2012-02-20 15:50 help_category.MYI -rwxrwxrwx 1 mysql root 8612 2012-02-20 15:50 help_keyword.frm -rwxrwxrwx 1 mysql root 88650 2011-11-12 15:42 help_keyword.MYD -rwxrwxrwx 1 mysql root 16384 2012-02-20 15:50 help_keyword.MYI -rwxrwxrwx 1 mysql root 8630 2012-02-20 15:50 help_relation.frm -rwxrwxrwx 1 mysql root 8874 2011-11-12 15:42 help_relation.MYD -rwxrwxrwx 1 mysql root 16384 2012-02-20 15:50 help_relation.MYI -rwxrwxrwx 1 mysql root 8770 2012-02-20 15:50 help_topic.frm -rwxrwxrwx 1 mysql root 414320 2011-11-12 15:42 help_topic.MYD -rwxrwxrwx 1 mysql root 20480 2012-02-20 15:50 help_topic.MYI -rwxrwxrwx 1 mysql root 9510 2012-02-20 15:50 host.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 host.MYD -rwxrwxrwx 1 mysql root 2048 2012-02-20 15:50 host.MYI -rwxrwxrwx 1 mysql root 8554 2011-11-12 15:42 innodb_monitor.frm -rwxrwxrwx 1 mysql root 98304 2011-11-12 15:55 innodb_monitor.ibd -rwxrwxrwx 1 mysql root 8592 2012-02-20 15:50 inventory.frm -rwxrwxrwx 1 mysql root 76 2011-11-12 15:42 inventory.MYD -rwxrwxrwx 1 mysql root 2048 2012-02-20 15:50 inventory.MYI -rwxrwxrwx 1 mysql root 8778 2012-02-20 15:50 ndb_binlog_index.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 ndb_binlog_index.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 ndb_binlog_index.MYI -rwxrwxrwx 1 mysql root 8586 2012-02-20 15:50 plugin.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 plugin.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 plugin.MYI -rwxrwxrwx 1 mysql root 9996 2012-02-20 15:50 proc.frm -rwxrwxrwx 1 mysql root 3983252 2012-02-03 22:51 proc.MYD -rwxrwxrwx 1 mysql root 36864 2012-02-21 13:23 proc.MYI -rwxrwxrwx 1 mysql root 8875 2012-02-20 15:50 procs_priv.frm -rwxrwxrwx 1 mysql root 1700 2011-11-12 15:42 procs_priv.MYD -rwxrwxrwx 1 mysql root 8192 2012-02-20 15:50 procs_priv.MYI -rwxrwxrwx 1 mysql root 3977704 2012-02-21 13:23 proc.TMD -rwxrwxrwx 1 mysql root 8800 2012-02-20 15:50 proxies_priv.frm -rwxrwxrwx 1 mysql root 693 2011-11-12 15:42 proxies_priv.MYD -rwxrwxrwx 1 mysql root 5120 2012-02-20 15:50 proxies_priv.MYI -rwxrwxrwx 1 mysql root 8838 2012-02-20 15:50 servers.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 servers.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 servers.MYI -rwxrwxrwx 1 mysql root 8955 2012-02-20 15:50 tables_priv.frm -rwxrwxrwx 1 mysql root 5957 2011-11-12 15:42 tables_priv.MYD -rwxrwxrwx 1 mysql root 8192 2012-02-20 15:50 tables_priv.MYI -rwxrwxrwx 1 mysql root 8636 2012-02-20 15:50 time_zone.frm -rwxrwxrwx 1 mysql root 8624 2012-02-20 15:50 time_zone_leap_second.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_leap_second.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_leap_second.MYI -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone.MYI -rwxrwxrwx 1 mysql root 8606 2012-02-20 15:50 time_zone_name.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_name.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_name.MYI -rwxrwxrwx 1 mysql root 8686 2012-02-20 15:50 time_zone_transition.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_transition.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_transition.MYI -rwxrwxrwx 1 mysql root 8748 2012-02-20 15:50 time_zone_transition_type.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_transition_type.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_transition_type.MYI -rwxrwxrwx 1 mysql root 10630 2012-02-20 15:50 user.frm -rwxrwxrwx 1 mysql root 5456 2011-11-12 21:01 user.MYD -rwxrwxrwx 1 mysql root 4096 2012-02-20 15:50 user.MYI

    Read the article

  • Move smaller hard drive to partition on a larger hard drive

    - by bluejeansummer
    My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu. I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot. Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority. In case it helps, both drives use 2.5" PATA, and I have a 1 TB external drive available if it's needed.

    Read the article

  • How to copy lots of files between two computers, without network?

    - by Steve Bennett
    I want to copy around 50Gb of files from my desktop to my work laptop. For some reason, the laptop won't connect to my home network. I haven't had any luck with a direct ethernet connection either, and I'm not willing to change any of the laptop's network configuration (last time I did that, I couldn't get onto the network at work, making me Not Very Popular). So...what else is there? The obvious route is copying via SD card. My largest card is 8Gb. But I can't find a good workflow. Is there a tool designed for this, where I could just repetitively move the card back and forth, without having to select files? I've tried using teracopy, but you end up missing a few files. I guess I could zip everything up into multi-volume .rars or something...but is there a more elegant way?

    Read the article

  • Canon MF3200 Printer Problems

    - by Derick K.
    I bought a Canon MF3200 and used it on an old Windows laptop. The laptop broke, and now I'm trying to setup the printer on a laptop with Windows 7. I downloaded the new driver, and Windows was able to install it and mark it "Ready to Go." But whenever I try to print, an error comes up and it doesn't print. I tried to troubleshoot, to no avail. What else can I do? Any ideas on what the error might be?

    Read the article

  • Windows could not update the computer's boot configuration.

    - by Luke Puplett
    Hello, I am trying to install Windows Web Server 2008 x64 (have tried 32-bit, too) onto an IBM eServer 326m and am getting the following error message some time after the unpacking files section: Windows could not update the computer's boot configuration. Installation cannot proceed. I can repair the boot information using the Repair option in the WinPE bit of the setup, and it reboots into the Windows installation, so it has good boot data on the drive. Just to complicate things, the server does not have a DVD-ROM so I'm installing from HDD to HDD, both SATA, one an SSD. I've tried each drive in isolation, e.g. removing the SSD and installing from spindle onto itself, same error every time. Flashed IBM BIOS, too. Thanks for your help. Luke

    Read the article

  • Windows 7 Default Gateway problem

    - by Matt
    Hi, I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

    Read the article

  • Intel Core i5-2467m - Turbo Boost not activating?

    - by Trevor Sullivan
    I have a Samsung Series 5 laptop with an Intel Core i5-2467m process @ 1.6Ghz. The processor supports Intel Turbo Boost up to 2.30 Ghz according to the specifications. The i5-2467m is a dual-core process with HyperThreading, so there is a total of four (4) virtual cores in Windows 7 SP1. http://ark.intel.com/products/56858/ I've installed the Intel Turbo Boost Technology Monitor v2.6 to monitor if Turbo Boost is enabled, and set it to "Always On Top." I followed this process to max out the CPU: Open (4x) PowerShell instances Set each instance's affinity to a distinct CPU vCore Ran this code in each instance: while (1 -eq 1) { } Unfortunately, after maxing out all 4 cores, my laptop got hot, but Turbo Boost never kicked in. Any ideas on how to ensure that I'm getting the 2.3Ghz Turbo Boost capability of my laptop?

    Read the article

  • DLP projector has odd colors

    - by torbengb
    At my place of work, we have several different video projectors, but they all use DLP technology, and the colors are wrong: for instance, yellow looks more like green, and all other colors are similarly distorted. Any kind of presentation or collaborative work is hindered by these wrong colors. On the laptop screen, the colors are fine but on the projector (hooked up via normal short VGA cable, and showing the same image at the same time), the colors look wrong. This is not about one specific projector or one specific laptop; it seems that any combination of projector + laptop has the exact same problem. Someone said that DLP is poor technology, but that's not true. I'm using a DLP projector at home (regular PC connected via HDMI) and the colors are excellent. Still, there's some kind of curse on the machinery at work. How can we get decent colors?

    Read the article

  • Browser won't connect to svn server

    - by devpi
    This has been driving me nuts. For some reason, I can't access my svn repository using a browser in this laptop that I'm using right now (firefox & ie) The connection just times out. I'm at home right now and the server is in another room. It connects OK there and it also connects OK in my virtual machine in this same laptop. I'm pretty stumped right now and can't figure out why this is happening. I've also checked the proxies and I'm 100% sure I'm not using any at all. The virtual machine running on this laptop is XP 32bit and this one is a Win7 64 bit. Thanks

    Read the article

  • Use alternative Active Directory server to gain administrative privileges

    - by Sharuzzaman Ahmat Raslan
    I have this idea, just want to see if it is implementable or not. Let say I have my office laptop, with no administrator privileges, using example domain ASDF Can I set at my home, another AD server (Microsoft or Samba 4), that have the same domain ASDF as my office laptop. Then I set an administrative user in my own AD server. Theoretically, is it possible to authenticate my office laptop with my own AD? If the above is possible, theoretically, is it possible to gain administrative privileges also with this setup? Thanks.

    Read the article

  • Keyboard, Dual Monitor Question

    - by Dmn
    Im about to get a 23inch Monitor to connect to my laptop for programming, and general multimedia besides. (this is the monitor what do you think? LG 23" LCD And would you recommend getting a keyboard to use (ie not using the laptop one?) seems like it would be kinda awkward otherwise. This is the keyboard im looking at because it seems to have the low laptop style keys. ||| tigerdirect .com/applications/SearchTools/item-details.asp?EdpNo=5214790&sku=L23-0054 ||| or would you recommend something different? Thanks

    Read the article

  • "the user profile service failed the logon"

    - by crazybmanp
    "the user profile service failed the logon" i had gotten this error when trying to login last night. i looked it up online and found that this was caused by an error (that is still unfound, apparently) that is causing windows to mark profiles as backup, and that the best way to fix this error is to do a system restore from the repair your computer special boot option. what i would like to know is if there someone happens to know the cause of this error, as i would not like it to happen again. Computer specifications OS: Windows 7 hard-disk check completely clean "repair startup" scan and fix: clean, no problems virus scans with kaspersky: clean (while not the usual information for specifications, i felt this info was more important for this case, any other information can be asked for.

    Read the article

  • Routing internet through ethernet to a computer without a Wireless adapter

    - by Decency
    I'm setting up a small home network. I have a laptop which connects to internet wirelessly- that works fine. I have a desktop connected to this laptop by an ethernet cable which I'd like to access the internet with. In the past, I have used a different laptop to do this and had no problems doing so. Both computers run Windows 7. I have tried setting up a homegroup and disabling Windows firewall, as well as restarting both computers. I can share data but my internet connection can not be accessed through the desktop. (I understand USB network adapters are cheap, I have one on the way but that doesn't solve this issue.) Any help or live chat support if you'd prefer would be appreciated. Thanks!

    Read the article

  • I just ordered 70/10 internet service, and need a new router I think?

    - by data_jepp
    Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

    Read the article

  • Possible to restore Windows Partition disk image?

    - by kd7iwp
    I have a machine that was dual-booting Windows 7 and Ubuntu 12.04. I used the Disks program in Ubuntu to make a disk image of my windows partition which I saved on an external disk. I then reformatted the main drive and installed Ubuntu 12.10. I created a spare partition and restored that Windows disk image to that partition. Is it possible to boot Windows? I have run boot-repair and Grub now gives me both Ubuntu and Windows options but when I select Windows I get only a black screen with blinking cursor. I ran a Windows recovery disk and ran startup repair but still no luck. I also tried running lilo inside Ubuntu but still can't boot Windows. Any other ideas? PS, I'm on a Netbook with no DVD drive so I can't just reinstall Windows though if that is my only option I can borrow a DVD eventually.

    Read the article

  • "Error loading operating system": Win7/Vista

    - by LookitsPuck
    Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

    Read the article

  • Unable to setup ssh tunnel on mac

    - by prashant
    On my office windows XP laptop I use a program called Bitvise Tunnelier to establish ssh tunnel to a in-house MySQL database. In the Tunnelier program I also need to provide address of corporate http proxy server in order to establish tunnel. On my personal mac laptop, I use Cisco Anywhere client to establish a VPN connection to my corporate network. But i'm unable to establish ssh tunnel to mysql database using ssh. How do I specify the proxy server address in the ssh command? As additional info when i'm using office laptop (whether in home or office) I can successfully ping to the server address specified in the Tunnelier program. But i cannot ping the same server using my mac machine (even after connecting via VPN). So basically i'm unable to understand what's going on and what steps i can take to debug this problem .

    Read the article

  • Recover an HP recovery partition

    - by eric.chartier
    I have a (semi)-dead hard drive with an HP recovery partition on it. My goal is to Buy a new hard drive Copy the recovery partition to a drive ( dd if=/dev/sdb1 of=~/recovery.bak ) Make a new partition of 12000 mb with Windows 7 Copy back recovery partition to the new drive ( dd if=~/recovery.bak of=/dev/sdb1 ) Then press F11 when the laptop boots. However, this doesn't work. Any idea why? Edit: I suspect the F11 doesn't work because the laptop tries to boot the laptop, because my partition is the primary partition of the drive. Does anyone have any experience dealing with stuff like this?

    Read the article

  • MAC and PC problems on home network

    - by tombull89
    Hello! At home we have a wireless router that my family want to use. We have our main computer physically connected to the router, and my laptop is connected wirelessly. When the network is like this then it is faultless. However, when my brother introduces is Apple MAC into the equation, both my laptop and the family machine gets all sorts of problems, primarily long load times and timeouts. The MAC, however, works fine. I think I've read something here or SF about a MAC continusly pinging a router which times it out, but I've not found any solution so far. Router: Belkin F5D7634uk4A-H Home Computer: XP SP3 My Laptop: Windows 7, Ultimate Mac: 13" Macbook Pro, Snow Lepoard

    Read the article

  • How do I activate Window 7 for a different computer?

    - by Abdullah BaMusa
    I bought Windows 7 Professional Retail which I installed on my laptop. Now I've decided to move it to be on my desktop PC, so I uninstalled Windows from my laptop, restoring the original OS came with the laptop (Vista Business), and installed Windows 7 on my desktop PC. The problem is that I cannot activate my copy of Windows 7 on the desktop PC. Every time I try to activate it I get the error message The product key you typed cannot be used to activate windows on this computer" and the code of the error is: Code: 0xc004c008 Description: The activation server determined that the specified product key could not be used. How can I solve this problem?

    Read the article

  • Restoring a Ubuntu Linux LVM drive

    - by user848106
    Scenario: I have a hard disk with a bootable sda1 partition and an Linux LVM. I seem to have corrupted the MBR? or Grub? not sure. I know it no longer boots and even with boot-repair and a Ubuntu live usb I was able to restore it. Following a "fix" with boot-repair I get "missing operating system" Can't i just reinstall grub or a new menu.lst? Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0007b68f Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM

    Read the article

  • DPMS, keep screen off when lid shut

    - by Evan Teran
    I have a laptop running linux. In my xorg configuration, I have DPMS setup so that the screen automatically turns off during several events. In addition to that I have to the following script tied to ACPI lid open/close events: #!/bin/sh for i in $(pidof X); do CMD=$(ps --no-heading $i) XAUTH="$(echo $CMD | sed -n 's/.*-auth \(.*\)/\1/p')" DISPLAY="$(echo $CMD | sed -n 's/.* \(:[0-9]\) .*/\1/p')" # turn the display off or back on export XAUTHORITY=$XAUTH /usr/bin/xset -display $DISPLAY dpms force $1 done Basically, this script takes one parameter ("on" or "off") then iterates through all of my running X sessions and either turns on or turns off the monitor. Here's my issue. When I close the lid of the laptop, the screen goes off as expected, but if a mouse event occurs (like if something bumps into the table...) then the screen turns back on even though it is closed (I can see the light through the side of the laptop). Is there a way to prevent the screen from turning on during a mouse event if the lid is closed?

    Read the article

  • Problem installing Ubuntu 10.04 64 bit side by side with Vista by using a bootable USB drive. What n

    - by Adam Siddhi
    What happened I decided to install Ubuntu 10.04 64 bit side by side with Vista Home Premium (I guess on another partition) with a USB stick. I found instructions on how to do this here: https://help.ubuntu.com/community/Installation/FromUSBStick To create the bootable USB drive I had to download a program called Unetbootin. That process was simple enough. All I had to do was just choose the disk image option, select the ubuntu-10.04-desktop-amd64.iso image, make sure it recognizes my USB drive and then press OK. It takes only like a few minutes to create a working bootable USB drive. Then I have to restart my computer, enter the BIOS, select my USB drive as the first boot drive, save options and continue with booting up. After this Ubuntu actually loads up. I think this is known as the Live version of Ubuntu so you can try it out before fully installing it. Any ways, on the Ubuntu 10.04 desktop I saw an installer. I click it and begin the installation process. Just so you know, I tried installing it 2 times. I will explain what happened each time: The first time I tried installing Ubuntu 10.04 I got stuck at step 4 of 7. I remember selecting the last option in the window which was Specify Partitions Manually (Advanced) I made my partition for Ubuntu like 52 gigs. I clicked forward and a little pop up window appeared saying Please Wait. So the installation process stalled on this window so I closed out of it and quit the installation process. So at this point I was worried because I had already selected the partition size and assumed it started making it. Since it stalled I had to quit out though. Anyways, once again I reached step 4 of 7 a decided to select the first option which is Install them side by side choosing between them each startup. I figured this was the safe way to go. I did that and the pop up window saying Please Wait popped up again but lasted only like 10 seconds. Then I got to I guess step 6 where it asks you to enter your desired name and password. Did that and clicked forward. The Ubuntu 10.04 installation load screen appeared and the loading bar at the bottom started filling up. So I got to 83% and stalled during the Importing other profile information (I think it was called this. I had the option to do this during I think step 6) process. So at this point I decided to get stop the installation process. I was getting very nervous. I tried to restart the computer but all that happened was that Ubuntu restarted. I finally got the computer to restart. I was pretty sure I had screwed something up big time by this point. As my computer was restarting I entered BIOS again and switched back to it booting from my main hard drive containing Vista. Saved it and continued the boot process. My worst fears were confirmed as Vista would not boot up. I mean I saw the little Microsoft Windows choppy animated green loading bar at the bottom of the screen and then boom! It decided to restart. When it restarted I had the option to run a memory test check to see if there was anything that needed to be repaired. That took like 20 minutes and at the end I saw that I did indeed have to repair something. I had to go through 2 repair processes. After each I had to restart the computer. The 2nd time it went through the repair process it said that it could not fully repair the damage. I was scared and restarted but Vista did load up. I got to my desktop and saw a message saying something like Repairs have been made, Please restart for changes to take effect I noticed that some Notification icons were missing and I could not hear volume in a video. Things were a bit funky. So I did restart and here I am. Now what?! So since I got back into Vista and thankfully have a working Internet connection I am trying to find answers to my problem (that is why I am writing this post). I am scared that I have partioned my hard drive 2 times after researching Installing Ubuntu 10.04 and seeing this post http://techie-buzz.com/foss/ubuntu-10-04-lts-installation-guide.html The author shows screen shots of installing Ubuntu 10.04. He shows the image of step 4 of 7 with a caption at the bottom. I will recreate it below: Select a partitioning option. Unless you want to format all the hard drive and install Ubuntu afresh, select the last option and proceed. Questions If I have indeed partitioned my HD 2 times (which I am sure it is), how do I get to a point where I can see all my bad, unfinished Ubuntu partitions and get rid of them? How do I clean this big mess up? & How can I ensure that this mess will not happen next time I try installing Ubuntu 10.04? Thank you Adam

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >