Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 108/379 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Camtasia on remote computer?

  - by daughtkom

  I have a need to use one laptop for a live presentation (with projector, etc.), but record that presentation on another laptop -- similar to what I can do with Camtasia, only with the recording happening on another laptop. Is this possible? What do I need to do this? Some VGA device that goes between the presenting machine and the projector? Some USB device? My ideal requirements: The machines must be "standard" laptops (so I can't just add a new card to a desktop, etc.). I prefer a hardware solution, but cannot involve studio type equipment. I'd prefer not to install Camtasia (or similar) on the presenting machine for two reasons: licensing issues performance issues (sometimes the presentations are machine intensive and I don't want the recording software to interfere with the presentation) I'd appreciate any tips. Thanks.

  Read the article

• Corrupt Windows 7, Chkdsk finds errors continuously after multiple tries

  - by mj_

  My Windows 7 instance is all corrupt on my Dell XPS laptop (my kid hibernated it as it was starting). I got the Windows 7 installation disc and I try to repair the installation. The repair goes through and it says done but it doesn't know if it repaired successfully. It just says reboot. I can also open a command line and I run chkdsk /F manually in there. What's strange is that I've run it 20 times and chkdsk claims that it fixes stuff every time. Eventually it stops and I reboot. Much to my chagrin, my machine is still broken. Chkdsk gives an error at the end that it can't write a log file. I've also run a full diagnostic using the Dell diagnostic tools. The tools say that everything is okay. Any suggestions regarding what I should do next? Any help appreciated. mj

  Read the article

• View scheduled recordings remotely

  - by Scott

  I have one computer which is equipped with a TV tuner card. The Recorded TV folder is shared so that other computers on the network can watch recordings. Now that I am upgrading my computers to Windows 7, they have Media Center, which makes for a nicer viewing experience than a Windows Explorer folder view. I have set up Media Center on my laptop to considering the Recorded TV folder on the tuner-equipped PC as an extended library location, so now I can view all the recordings from within Media Center on the laptop. To make this experience even better, is there a way to view the list of scheduled recordings on the tuner-equipped PC from within Media Center on my laptop?

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• Radiation from a UPS

  - by Erel Segal

  In our office, there are frequent eletric shortages that harm my desktop computer, so I wanted to install a UPS. However, my office-mates pointed me to papers talking about hazardous radiation from the UPS. The UPS manufacturers themselves recommend to put the UPS several meters away from humans, which is not possible because our office is small (the power is about 0.5 meters from us). As an alternative to UPS, my office-mates recommended that I switch to a laptop, which has a battery so it's immune to shortages. I have several questions: Is it true that the radiation from a laptop battery is lower than the radiation from a UPS? They do just the same thing - supply power using a battery! If the answer to 1 is yes - is there an alternative way to attach a battery, similar to a laptop battery, to a desktop computer? If the answer to 1 is no - how can I prove this to my office-mates, so that they let me use UPS?

  Read the article

• Mountain Lion screen crashes after returning from sleep

  - by Aron Rotteveel

  During the past 3 days I have experienced the following issue: when returning from sleep, I see an extremely garbled version of my desktop. The only thing that seems to help is a reboot. My first guess is that this is related to the video card. After looking into this issue, I found a lot of problems related to ML and returning from sleep, such as this post on AskDifferent, but I think this is a different issue because it does not speak of a garbled screen. Some more details: System: MacBook Pro 15" early 2011, 2,2GHZ I7, 8GB Ram, AMD Radeon HD6750M 1024 The issue seems to happen only when I open my laptop in the morning; if I close and open my laptop during the day, it does not seem to happen. The issue 'solves' when rebooting. Photo of how this looks: Update November 27th 2012: I re-installed my laptop a couple of weeks ago, which seemed to have solved the problem, but sadly, it still persists.

  Read the article

• Windows XP Blue-Screens And Reboots Instantly On Boot-Up

  - by ashes999

  My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

  Read the article

• Corrupt mysql system tables

  - by psynnott

  I am having issues with the columns_priv table in the mysql system database. I cannot add new users currently. I have tried repairing it using mysqlcheck --auto-repair --all-databases --password but I get the following output: mysql.columns_priv Error : Incorrect file format 'columns_priv' error : Corrupt Is there any other way to repair this table, or how do I go about replacing it with a blank table? What would I lose by doing that? Thank you Edit (Additional Info) mysqld is currently using 100% cpu constantly. Looking at show processlist, I get: mysql> show processlist; +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | 5 | debian-sys-maint | localhost | mysql | Query | 1589 | Opening tables | ALTER TABLE tables_priv MODIFY Column_priv set('Select','Insert','Update','References') COLL | | | 752 | root | localhost | NULL | Query | 0 | NULL | show processlist | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• Samba as a PDC and offline authentication

  - by Aimé Barteaux

  Say I have a Windows laptop which has been connected to a domain. The domain has a Samba server as a PDC. Now say that I move the laptop outside of the network (the network is completely inaccessible). Will I be able to logon into accounts I have accessed before on the laptop (through GINA)? Update: Looking at the smb.comf documentation I noticed the setting winbind offline logon: This parameter is designed to control whether Winbind should allow to login with the pam_winbind module using Cached Credentials. If enabled, winbindd will store user credentials from successful logins encrypted in a local cache.. To me it looks like this solves the issue but can anyone else confirm it and/or point out if any additional values need to be set?

  Read the article

• identifying windows service

  - by András

  On my win7 machine when I watch a movie in XBMC, once per hour the desktop regains the focus. The movie keeps playing, but in the background now, so I can only hear it. It is quite irritating. I noticed, that the Windows Application log always contains two entres for this time: "The description for Event ID 0 from source Self-service Plug-in cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer." One entry is for starting, and one for stopping 60 seconds later. This keeps repeating, every two starts 3600 seconds apart. How can I repair it? How can I find out which service it is?

  Read the article

• clean reinstall of windows on dell xps 1530 using bundled software from dell?

  - by kacalapy

  i wanted to delete my laptop hard drive and reinstall the os that came on the media with the laptop originally. i booted from the windows disk and reinstalled windows but this did not delete my hard drive and even worse it made a windows.old folder with all my old junk on my c drive how do i get a clean/ deleted c drive with new install of my os? i have a small 120 Gig solid state hard drive with just one partition. i would like to create two partitions on the new install. my main issue is not being able to get a clean install such that the result is a pure windows laptop with no junk files that have accumulated over time. please advise.

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• clean reinstall of windows on dell xps 1530 using bundled software from dell?

  - by kacalapy

  i wanted to delete my laptop hard drive and reinstall the os that came on the media with the laptop originally. i booted from the windows disk and reinstalled windows but this did not delete my hard drive and even worse it made a windows.old folder with all my old junk on my c drive how do i get a clean/ deleted c drive with new install of my os? i have a small 120 Gig solid state hard drive with just one partition. i would like to create two partitions on the new install. my main issue is not being able to get a clean install such that the result is a pure windows laptop with no junk files that have accumulated over time. please advise.

  Read the article

• which vista services can be disabled with impunity?

  - by GwenKillerby

  I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. thanks, Gwen.

  Read the article

• Reducing CPU load to absolute minimum [on hold]

  - by user191338

  I have had a couple of things gone missing I believe stolen in my shared apartment and want to run my laptop constantly with a webcam attached, running webcam surveillance software to record/ take pictures when motion is sensed. Id like to take whatever steps are necessary to be able to run the laptop constantly without the fan coming on, as its quite loud and even though it will be hidden it can be heard. Thus Id like to know what steps I can take to reduce CPU to the bare minimum for the laptop to boot up and run the camera software and send images via ftp / email when necessary. I have windows 7 installed, though I can reinstall it clean. Which are the windows services can I turn off, and more extreme disabling or measures of whatever kind which I can take. The OS would need to run the camera, wifi / networking. Thanks very much for any help.

  Read the article

• Windows undetectable after interrupted chkdsk

  - by Felthragar

  I have a computer that is running Windows XP. For some reason, the other day it wouldn't start giving me the following message: "ntoskrnl.exe is missing or corrupt" So I put the XP disc in the tray and fired up the repair console and ran the following: chkdsk /r It was on for about eight hours and it got to about 52% I believe. Then there was a power outage and the computer shut down (obviously). Today when I was booting it, it isn't even detecting there's an OS anymore. If I boot the computer with no cd in the tray it says: "Reboot and select a proper Boot device or Insert Boot Media in selected Boot device and press a key" If I run the repair console, or the xp installation program it isn't finding any OS installations. Any ideas on what to do next? Any help is appreciated. Thanks! Update: After turning boot-time diagnostics on, I got this message when booting without cd (instead of the previous one): "Couldn't open drive multi(0)disk(0)rdisk(0)partition(2)"

  Read the article

• What do I need to know and how do I backup a recovery partition?

  - by PeanutsMonkey

  I am in the possession of a HP laptop specifically the HP Folio Ultrabook. I need to make an image of the harddrive so that in the event it needs to be restored I can do so with the base operating system which is Windows 7 Professional as well as the HP recovery partition. I also need to backup all data that is on the laptop. Where do I start? What software can I use? Please limit these to freely available software or Linux I need to be able to backup the image to a file server and an external harddrive Is there anything else I need to do or know? The laptop is being used by a user on a domain

  Read the article

• outlook freezes on splash screen - loading profile

  - by sammarcow

  I have a user with a frustrating application crash issue without Outlook: Windows 7 x64 Outlook 2010 crashes on the splash screen with the message "loading profile." I have deleted the users .ost file in "..\AppData\Local\Microsoft\Outlook\" and this crash occurs for multiple users including those with administrator privileges. I have also tried running outlook at the command prompt as an admin with the /safe command-line switch. I tried the repair utility in "programs and features by clicking Change after selecting Microsoft Office:" ~~ Microsoft office failed to successfully repair your product . I tried to uninstall Microsoft Office ~~ Microsoft Office failed to successfully uninstall this product. I am trying to avoid reimaging the machine for obvious reasons. Is there anything else I can try or insight any one has on this issue?

  Read the article

• Unused Index Entries: What causes them?

  - by Bart Silverstrim

  I was running chkdsk on one of our servers and it fixed 800 unused index entries (minor inconsistencies) on the drive. I also see these on lab machines running Deep Freeze, where most drive changes are supposed to be prevented although I'm not sure of the mechanism through which it does this. The thing that got me more curious than usual is that this server does very little. Very little activity, it remotely serves out a web app with little use so it's rarely ever touched at the console...so what is it on NTFS drives that causes this? It seems to be treated as if it's nothing, but should this be happening on a barely used filesystem? Is it a sign of corruption? I would think it's something if a disk repair utility sees fit to report it and repair it. Maybe this is more curiosity while doing some routine maintenance on servers, but I'd like to know what this is doing and why it happens, if anyone can give insight on this phenomena.

  Read the article

• Linux install error " dracut Warning: Can't mount root filesystem. "

  - by NBB

  I am installing Fedora 16. I just insert CD to install Fedora 16 in my laptop however, I am getting this error like "dracut Warning: Can't mount root filesystem." http://cfile7.uf.tistory.com/image/176BAA3C4EBF9F89051FA7 <--- like this I am not really sure how to fix it. (this is the first time to install Fedora 16 in my laptop) In my laptop , I previously installed Windows 7 Professional. I have not install any kind of Linux before. Does anyone know how to fix this problem ?

  Read the article

• VGA resolution with Sony Bravia TV

  - by prestomation

  I just bought Sony Bravia KDL40S5100 tv. The VGA input is acting weird. I have a Gateway desktop with Windows 7 and Intel 945 graphics. I also have a laptop running Ubuntu 9.04. The TV will not display the gateway when the resolution is over 1360x768, I have to wait for it to time out and bring me back. The Intel driver even urges me to switch to the "recommended" 1920x1080. I just installed Win7 using this tv as the monitor. When the orginial welcome screen started after setup, it started me at 1080. I had to start in safemode to set a res that would work! When I plug my laptop into the TV, 1920x1080 works just fine. Any ideas? This laptop also has Win7, which I am going to try, but I haven't gotten a chance yet.

  Read the article

• Requiring mulitple group membership in order to access folder

  - by David

  How would I go about creating a file or folder that requires a user to be a member of two or more different groups in order to read/write to the folder? For example, say I run an auto repair shop, and I have a folder called "Repair History" and I only want people to access it if they are members of BOTH the "Mechanics" and "Cashiers" group? This would be an AND requirment instead of an OR requirement which seems to be the norm. I know we can create a separate group that is needed to access the folder, but this is more of an academic question, since it pertains to a different security structure that we are creating. I'm not sure if MS security handles it, but I'm wondering how it would be done either way.

  Read the article

• Ubuntu 9.10 freezes when HDMI port is connected

  - by Felipe Hummel

  Hi, I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

  Read the article

• Windows Media Player won't open

  - by Haein

  When I tried to play a DVD on my laptop, I tried to open WMP but it didn't open. I did leave the DVD in my laptop for a fortnight but when I played it a week ago it was fine and my DVD drive is reading the DVD so I think that's ok. I tried to make sure WMP is up to date and it was working fine until a few days ago. I can't think of any triggers for this and when I tried to uninstall it that didn't work either as I couldn't even find it in the programs list. I then tried to install a different media player (GOM) but that didn't play my DVD either although it did play music fine. I am really concerned - should I just get a new laptop? Or is it worth getting it fixed?

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >