Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 104/247 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Multi-screen and Nvidia GT220

  - by Bohors

  Excuse me first for my broken English I have 3 monitors on two Nvidia GT220. Unity 2D works fine after using the proprietary drivers. But no way to use compiz effects. I'm on Ubuntu 11.10 (I also tested for curiosity 12.04 for the same result) I noticed in the "System Settings" / "details" that my graphics card is not recognized (graphics card "unknown") and "View" only returns me my first screen (with the correct resolution) also in unknown. $ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 05:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) xorg.conf : Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Below "Screen0" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "LG Electronics L1920P" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 0 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60_0 +0+0; nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Have you any idea? thanks

  Read the article

• HDA NVidia (GT520) - Sound Issue

  - by Oliver Lucas

  I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

  Read the article

• How to get Nvidia 555M working on Ubuntu 12.10 (drivers, optimus, cuda)?

  - by bluudz

  I'm trying for few days to get my GPU working properly on Alienware M14x with GPU NVidia 555M, but I have no luck at all. After fresh ubuntu install I did follow the guide here NVIDIA Optimus and Ubuntu 12.10 and istalled Bumblebee without problems. Tested glxspheres/optirun glxspheres both working fine. Now I was continuing to install CUDA as is said here How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? but I'm getting: Driver: Not Selected Toolkit: Installation Failed. Using unsupported Compiler. Samples: Installation Failed. Missing required libraries. I did not select the driver as I though Bumblebee installed driver already. How should I proceed? And also at what point is the NVidia driver being installed and how can I try its working? Bumblebee seems to be installing the driver, CUDA wants to do the same, its all a bit confusing really. Sorry if its lame question, but I would really want to at least get graphic card and second screen working.. Thank you for any help.

  Read the article

• M-Audio Delta 1010LT on 12.04

  - by user74039

  I have 12.04 64bit installed, my soundcard is a Delta 1010LT, it seems to be partially detected, I've been following steps here: https://help.ubuntu.com/community/SoundTroubleshooting/ lspci -v | grep -A7 -i "audio" shows this: 04:07.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. M-Audio Delta 1010LT Flags: bus master, medium devsel, latency 64, IRQ 22 I/O ports at ec00 [size=32] I/O ports at e880 [size=16] I/O ports at e800 [size=16] I/O ports at e480 [size=64] Capabilities: <access denied> Kernel driver in use: snd_ice1712 aplay shows this: **** List of PLAYBACK Hardware Devices **** card 0: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 In the sound settings on the desktop all I see is the ICE1712 S/PDIF, which I don't use, I want to use the individual outputs on the card, I'm not so bothered about inputs, I just want the playback for now. If I open alsamixer in the console, I see all of the output and input channels, i've raised the volume on them but I don't get anything in the sound settings on the desktop and when I play any sound, I hear nothing. Can someone help?

  Read the article

• Ubuntu live cd : black screen and blinking cursor

  - by IFasel

  I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

  Read the article

• Will the Driver Support for Intel HD Graphics be Improved in 12.10?

  - by Hiranya

  I recently installed Ubuntu 12.04 on a HP Pavilion dv4 laptop. This is a core i7 machine with Intel HD graphics and also a separate nVidia VGA card. I had a lot of issues getting Ubuntu 12.04 working on this system. First there were issues booting up the live CD for installation. I worked around that by using the 'nomodeset' option. Then I continued to have similar issues after installation has completed. So I had to permanently add the nomodeset option to my GRUB boot configuration. At the moment I have a working installation but there are many issues: Ubuntu GUI is a bit flaky at times. The mouse pointer goes on and off when hovering over certain icons. Certain things doesn't get rendered properly on the screen. I can't access any of the tty consoles. Hitting Ctrl+Alt+F[1-6] gives me a blank screen. And once that happens I can't even come back to the UI by hitting Ctrl+Alt+F7. I've realized that tty consoles are actually working. I just can't see the text. If I enter a command like 'sudo reboot' into the empty screen the machine reboots. Can't get external displays (monitors, projectors etc) working. But I think this is probably because the VGA out is wired to the nVidia card which is not being used by Linux. colord program crashes every now and then triggering a popup message. So my main question is, will the support for Intel HD graphics be improved in the next release? Or will I have to keep using the nomodeset option in the new release too? Also I appreciate if anybody can shed some light on any of the issues listed above. Thanks in advance.

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• Intermittent sound

  - by ej159

  The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

  Read the article

• Which powerful laptop, with UK keyboard and 8gb ram

  - by RobinL

  I've been searching high and low for high spec laptops compatible with Ubuntu. The lack of coherent information on the topic is high (considering the number of people who apparently want a good laptop with an OS operating system). So I thought you may have some advice. My requirements: a) has = 8Gb ram b) is compatible with Ubuntu c) has a UK keyboard and charger d) does not cost the Earth Which would you go for? Does anyone have good experience with high-end laptops running Ubuntu? So here's some background research: Samsung Series 7 looks great, but has various problems on Ubuntu, including: poor battery life, touchpad does not work, graphics card not fully supported and sucks power when it does (see [here] and [here], for example). Other options on the [wish list] include: the sensible [Acer] (possibly n.1 choice, but not sure about graphics card compatibility or battery), a nice looking [HP Pavilion dv6-6c56ea], which also has incompatibility issues (see [here] and [here] and check ubuntuforums) And another [Acer] which may be best due to its simplicity and cheapness. Other sub-questions: didn't Dell offer Ubuntu support for decent laptops (above 6Gb ram their offerings are scarce); what about pre-installed options such as those provided by System76? If it weren't for the UK keyboard and charger, I'd probably go for this [amazing-looking] [machine]. Many thanks for any advice, P.s. Apologies for lack of hyperlinks; I'm a noob so only allowed 2 :( All 10 links are available here though for the interested reader :) Robin

  Read the article

• Two Hidden NetBeans Keyboard Shortcuts for Opening & Toggling between Views

  - by Geertjan

  The following are two really basic shortcuts for working with NetBeans editor windows that will be added to the Keyboard Shortcuts card for NetBeans IDE 7.2: Ctrl-Alt-PgUp/PgDown: Shortcuts for switching between editor types (e.g. Source, Design, History buttons). Switching between the editor types is a frequent operation sometimes, e.g., when using GUI builder, and while it can be done easily via mouse, or from View | Editors menu, it is very handy to know the shortcuts as well. Ctrl-PgUp/PgDown: Similarly, these are shortcuts for switching to next/previous opened document (tab). Note this is not like Ctrl-Tab that cycles in the last used order, but going through the tabs as they appear in the editor. Both shortcuts should fit into the "Opening and Toggling between Views" section. These are important to mention on the card because they are not visible anywhere else in the UI (as there are no menu items like "Go to next/previous editor type" or "Go to next/previous document"). Reported by Tomas Pavek from the NetBeans Team, here: http://netbeans.org/bugzilla/show_bug.cgi?id=213815

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• No sound, can't adjust alsamixer volume

  - by user734613

  I have no sound on my ubuntu and I do not know why. I saw a lot of posts about that, I tried a lots of solutions that I found (especially this one) but it still does not work. I suspect alsamixer. I can't adjust the sound. http://img15.hostingpics.net/pics/447765Screenshotfrom20120621140430.png I tried to reinstall alsa mixer using this tutorial but it seems the package does not exist anymore. E: Unable to locate package linux-alsa-driver-modules-3.2.0-25-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-25-generic' Here are my configuration: cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) aplay -l List of PLAYBACK Hardware Devices ** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 grep eld_valid /proc/asound/NVidia/eld* /proc/asound/NVidia/eld#0.0:eld_valid 0 /proc/asound/NVidia/eld#0.1:eld_valid 0 Thanks in advance for your help.

  Read the article

• How do I get my Intel HD graphics to work alongside my HD7850, as my second(HDMI out) monitor?

  - by AlexTes

  Title says it all. Further info: Motherboard: http://www.asrock.com/mb/Intel/Z77%20Pro3/ Processor: http://ark.intel.com/products/65520/Intel-Core-i5-3570K-Processor-%286M-Cache-up-to-3_80-GHz%29 So currently my main screen is running on my HD7850. Got drivers from the amd website. I have looked through dozens of questions here. I'm about to try booting Ubuntu from a stick and seeing if the xorg-edgers drivers might help. When booting, all action goes down on the very screen I'm trying to get to work.*EDIT never mind this. Seems to be special boot magic. As the screen only displays whiteline errors once the gui of ubuntu has kicked in and everything graphic is happening through my graphics card again. Connected through HDMI(motherboard)-DVI. So unless having multiple displays is a huge deal the solution hopefully isn't that complicated. I just feel I'm missing something simple. If this really is complicated, I should probably just hook up the display to my graphics card. My CPU is usually the one chilling out though so I'd like to try to get that to work. Also just because I don't want to buy an extra cable and this set up makes me feel warm and fuzzy inside. Tell me what to try or look up, I'll be most appreciative. Thank you! **UPDATE The x-swat ppa installed some intel stuff. Booting with one monitor plugged into the motherboard gives nothing. Doing it with the pc already on gives the purple "Ubuntu" with 5 dots boot/shutdown screen.

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

• Ubuntu installer shows three small screens

  - by Sylan

  I'm trying to install Ubuntu (or Kubuntu, which I tried first) 13.04 on a new laptop. I need the install in UEFI mode in order to properly dual boot with Windows 8. I've managed to overcome most of the UEFI issues up to the installer, which appeared as a black screen until I used nomodeset. Now the installer will appear, however it does fit my screen size. Instead, it appears as three small identical screens across the top of the monitor. I thought the problem could be solved by changing the display resolution in GRUB via changing the vga number, but this simply expanded the width of the three screens. While I could install it at this point, the identical screens are too small for me to be able to read the installer. As well, the "Try Ubuntu" option simply gets stuck at a black screen. I'm afraid these problems may persist through the installation if I attempted to continue. Additional information: The laptop is a Lenovo Ideapad Y580 with an i7 3630qm processor, and a GeForce GTX 660m graphics card which works alongside an Intel HD 4000 integrated card via Optimus.

  Read the article

• Is this too much to ask for a game programming and developing enthusiast? Am I doing this wrong?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

• count specific values in a multidimensional array

  - by user1680701

  I have an odd set of arrays that I need to count how many times specific values show in the results. Currently I have this bit of code. $nested_arrays = shopp_orders( '2011-11-30 00:00:00', '2012-11-30 12:59:59', false, '', 2 ); print_r($nested_arrays); This code pulls multiple arrays (serialized data) from the database and outputs like this Array ( [30] => Purchase Object ( [purchased] => Array ( ) [columns] => Array ( ) [message] => Array ( ) [data] => Array ( ) [invoiced] => [authorized] => [captured] => [refunded] => [voided] => [balance] => 0 [downloads] => [shipable] => [shipped] => [stocked] => [_position:DatabaseObject:private] => 0 [_properties:DatabaseObject:private] => Array ( ) [_ignores:DatabaseObject:private] => Array ( [0] => _ ) [_map:protected] => Array ( ) [_table] => wp_shopp_demo_shopp_purchase [_key] => id [_datatypes] => Array ( [id] => int [customer] => int [shipping] => int [billing] => int [currency] => int [ip] => string [firstname] => string [lastname] => string [email] => string [phone] => string [company] => string [card] => string [cardtype] => string [cardexpires] => date [cardholder] => string [address] => string [xaddress] => string [city] => string [state] => string [country] => string [postcode] => string [shipname] => string [shipaddress] => string [shipxaddress] => string [shipcity] => string [shipstate] => string [shipcountry] => string [shippostcode] => string [geocode] => string [promos] => string [subtotal] => float [freight] => float [tax] => float [total] => float [discount] => float [fees] => float [taxing] => list [txnid] => string [txnstatus] => string [gateway] => string [paymethod] => string [shipmethod] => string [shipoption] => string [status] => int [data] => string [secured] => string [created] => date [modified] => date ) [_lists] => Array ( [taxing] => Array ( [0] => exclusive [1] => inclusive ) ) [id] => 30 [customer] => 12 [shipping] => 23 [billing] => 23 [currency] => 0 [ip] => 24.125.58.205 [firstname] => test [lastname] => test [email] => [email protected] [phone] => 1234567890 [company] => [card] => 1111 [cardtype] => Visa [cardexpires] => 1420070400 [cardholder] => test [address] => 123 Any Street [xaddress] => [city] => Danville [state] => VA [country] => US [postcode] => 24541 [shipname] => [shipaddress] => 123 Any Street [shipxaddress] => [shipcity] => Danville [shipstate] => VA [shipcountry] => US [shippostcode] => 24541 [geocode] => [promos] => Array ( ) [subtotal] => 49.37 [freight] => 9.98 [tax] => 9.874 [total] => 69.22 [discount] => 0 [fees] => 0 [taxing] => exclusive [txnid] => [txnstatus] => authed [gateway] => TestMode [paymethod] => credit-card-test-mode [shipmethod] => ItemRates-0 [shipoption] => Fast Shipping [status] => 0 [secured] => [created] => 1354096946 [modified] => 1354096946 ) [29] => Purchase Object ( [purchased] => Array ( ) [columns] => Array ( ) [message] => Array ( ) [data] => Array ( ) [invoiced] => [authorized] => [captured] => [refunded] => [voided] => [balance] => 0 [downloads] => [shipable] => [shipped] => [stocked] => [_position:DatabaseObject:private] => 0 [_properties:DatabaseObject:private] => Array ( ) [_ignores:DatabaseObject:private] => Array ( [0] => _ ) [_map:protected] => Array ( ) [_table] => wp_shopp_demo_shopp_purchase [_key] => id [_datatypes] => Array ( [id] => int [customer] => int [shipping] => int [billing] => int [currency] => int [ip] => string [firstname] => string [lastname] => string [email] => string [phone] => string [company] => string [card] => string [cardtype] => string [cardexpires] => date [cardholder] => string [address] => string [xaddress] => string [city] => string [state] => string [country] => string [postcode] => string [shipname] => string [shipaddress] => string [shipxaddress] => string [shipcity] => string [shipstate] => string [shipcountry] => string [shippostcode] => string [geocode] => string [promos] => string [subtotal] => float [freight] => float [tax] => float [total] => float [discount] => float [fees] => float [taxing] => list [txnid] => string [txnstatus] => string [gateway] => string [paymethod] => string [shipmethod] => string [shipoption] => string [status] => int [data] => string [secured] => string [created] => date [modified] => date ) [_lists] => Array ( [taxing] => Array ( [0] => exclusive [1] => inclusive ) ) [id] => 29 [customer] => 13 [shipping] => 26 [billing] => 25 [currency] => 0 [ip] => 70.176.223.40 [firstname] => Bryan [lastname] => Crawford [email] => [email protected] [phone] => 4802323049 [company] => ggg [card] => 1111 [cardtype] => Visa [cardexpires] => 1356998400 [cardholder] => ggg [address] => 1300 W Warner Rd [xaddress] => [city] => Gilbert [state] => AZ [country] => US [postcode] => 85224 [shipname] => [shipaddress] => 1300 W Warner Rd [shipxaddress] => [shipcity] => Gilbert [shipstate] => AZ [shipcountry] => US [shippostcode] => 85224 [geocode] => [promos] => Array ( ) [subtotal] => 29.95 [freight] => 9.98 [tax] => 0 [total] => 39.93 [discount] => 0 [fees] => 0 [taxing] => exclusive [txnid] => [txnstatus] => authed [gateway] => TestMode [paymethod] => credit-card-test-mode [shipmethod] => ItemRates-0 [shipoption] => Fast Shipping [status] => 0 [secured] => [created] => 1353538691 [modified] => 1353538691 ) ) This is order data from only two orders. I need to count how many times each state, each city, shipmethod, etc occur in the array. I tried the following but it only counted the 2 large arrays. function count_nested_array_keys(array &$a, array &$res=array()) { $i = 0; foreach ($a as $key=>$value) { if (is_array($value)) { $i += count_nested_array_keys($value, &$res); } else { if(!isset($res[$key])) $res[$key] = 0; $res[$key]++; $i++; } } return $i; } $total_item_count = count_nested_array_keys($nested_arrays, $count_per_key); echo "count per key: ", print_r($count_per_key), "\n"; If someone could show me how to count how many times each state value occurs, example, VA = 2 NC = 1 I can take it from there. Thank You.

  Read the article

• Apache2 benchmarks - very poor performance

  - by andrzejp

  I have two servers on which I test the configuration of apache2. The first server: 4GB of RAM, AMD Athlon (tm) 64 X2 Dual Core Processor 5600 + Apache 2.2.3, mod_php, mpm prefork: Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 150 KeepAliveTimeout 4 <IfModule Mpm_prefork_module> StartServers 7 MinSpareServers 15 MaxSpareServers 30 MaxClients 250 MaxRequestsPerChild 2000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c Second server: 8GB of RAM, Intel (R) Core (TM) i7 CPU [email protected] Apache 2.2.9, **fcgid, mpm worker, suexec** PHP scripts are running via fcgi-wrapper Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4 <IfModule Mpm_worker_module> StartServers 10 MaxClients 200 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 1000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c worker.c http_core.c mod_so.c The following test results, which are very strange! New server (dynamic content - php via fcgid+suexec): Server Software: Apache/2.2.9 Server Hostname: XXXXXXXX Server Port: 80 Document Path: XXXXXXX Document Length: 179512 bytes Concurrency Level: 10 Time taken for tests: 0.26276 seconds Complete requests: 1000 Failed requests: 0 Total transferred: 179935000 bytes HTML transferred: 179512000 bytes Requests per second: 38.06 Transfer rate: 6847.88 kb/s received Connnection Times (ms) min avg max Connect: 2 4 54 Processing: 161 257 449 Total: 163 261 503 Old server (dynamic content - mod_php): Server Software: Apache/2.2.3 Server Hostname: XXXXXX Server Port: 80 Document Path: XXXXXX Document Length: 187537 bytes Concurrency Level: 10 Time taken for tests: 173.073 seconds Complete requests: 1000 Failed requests: 22 (Connect: 0, Length: 22, Exceptions: 0) Total transferred: 188003372 bytes HTML transferred: 187546372 bytes Requests per second: 5777.91 Transfer rate: 1086267.40 kb/s received Connnection Times (ms) min avg max Connect: 3 3 28 Processing: 298 1724 26615 Total: 301 1727 26643 Old server: Static content (jpg file) Server Software: Apache/2.2.3 Server Hostname: xxxxxxxxx Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.558 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 40864400 bytes HTML transferred: 40557482 bytes Requests per second: 281.09 [#/sec] (mean) Time per request: 355.753 [ms] (mean) Time per request: 3.558 [ms] (mean, across all concurrent requests) Transfer rate: 11217.51 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 3 11 4.5 12 23 Processing: 40 329 61.4 339 1009 Waiting: 6 282 55.2 293 737 Total: 43 340 63.0 351 1020 New server - static content (jpg file) Server Software: Apache/2.2.9 Server Hostname: XXXXX Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.571531 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 41282792 bytes HTML transferred: 41030080 bytes Requests per second: 279.99 [#/sec] (mean) Time per request: 357.153 [ms] (mean) Time per request: 3.572 [ms] (mean, across all concurrent requests) Transfer rate: 11287.88 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 2 63 24.8 66 119 Processing: 124 278 31.8 282 391 Waiting: 3 70 28.5 66 164 Total: 126 341 35.9 350 443 I noticed that in the apache error.log is a lot of entries: [notice] mod_fcgid: call /www/XXXXX/public_html/forum/index.php with wrapper /www/php-fcgi-scripts/XXXXXX/php-fcgi-starter What I have omitted, or do not understand? Such a difference in requests per second? Is it possible? What could be the cause?

  Read the article

• Secure ldap problem

  - by neverland

  I have tried to config my openldap to have secure connection by using openssl on Debian5. By the way, I got trouble during the below command. ldap:/etc/ldap# slapd -h 'ldap:// ldaps://' -d1 >>> slap_listener(ldaps://) connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_read(15): unable to get TLS client DN, error=49 id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 ber_get_next ber_get_next on fd 15 failed errno=0 (Success) connection_closing: readying conn=7 sd=15 for close connection_close: conn=7 sd=15 Then I have search for "unable to get TLS client DN, error=49 id=7" but it seems no where has a good solution to this yet. Please help. Thanks # Well, I try to fix something to get it work but now I got this ldap:~# slapd -d 256 -f /etc/openldap/slapd.conf @(#) $OpenLDAP: slapd 2.4.11 (Nov 26 2009 09:17:06) $ root@SD6-Casa:/tmp/buildd/openldap-2.4.11/debian/build/servers/slapd could not stat config file "/etc/openldap/slapd.conf": No such file or directory (2) slapd stopped. connections_destroy: nothing to destroy. What should I do now? log : ldap:~# /etc/init.d/slapd start Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldaps:///' -g openldap -u openldap -f /etc/ldap/slapd.conf ldap:~# tail /var/log/messages Feb 8 16:53:27 ldap kernel: [ 123.582757] intel8x0_measure_ac97_clock: measured 57614 usecs Feb 8 16:53:27 ldap kernel: [ 123.582801] intel8x0: measured clock 172041 rejected Feb 8 16:53:27 ldap kernel: [ 123.582825] intel8x0: clocking to 48000 Feb 8 16:53:27 ldap kernel: [ 131.469687] Adding 240932k swap on /dev/hda5. Priority:-1 extents:1 across:240932k Feb 8 16:53:27 ldap kernel: [ 133.432131] EXT3 FS on hda1, internal journal Feb 8 16:53:27 ldap kernel: [ 135.478218] loop: module loaded Feb 8 16:53:27 ldap kernel: [ 141.348104] eth0: link up, 100Mbps, full-duplex Feb 8 16:53:27 ldap rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1705" x-info="http://www.rsyslog.com"] restart Feb 8 16:53:34 ldap kernel: [ 159.217171] NET: Registered protocol family 10 Feb 8 16:53:34 ldap kernel: [ 159.220083] lo: Disabled Privacy Extensions

  Read the article

• Graphics driver for ubuntu on dell latitude XT

  - by marc.riera

  Hi, we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine. since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x. But, we do not manage to enable the touchscreen, neither the vga graphic drivers. this is the output from lspci, if somebody cares. 00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 7930 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS7932 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc Device 7934 00:06.0 PCI bridge: ATI Technologies Inc RS7936 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc Device 7937 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Xpress 1250 03:01.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 03:01.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 03:01.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0b:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03) I've tryied to install ati drivers 9.3 , which I downloaded and installed, unpacked and installed, builded and installed, but nothing worked. Looks like the latests version is just accepted to work on jaunty 9.04, so they are kind of old. what else I can do? thanks. Marc Information added: lsusb and lspci -n |grep 01:05.0 sysop@wl083517:~$ lspci -n |grep 01:05.0 01:05.0 0300: 1002:7942 sysop@wl083517:~$ lsusb Bus 006 Device 002: ID 413c:8138 Dell Computer Corp. Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard EAP-SIM Port Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1b96:0001 N-Trig Duosense Transparent Electromagnetic Digitizer Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 03f0:1807 Hewlett-Packard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sysop@wl083517:~$

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• Secure ldap problem

  - by neverland

  Hi there, I have tried to config my openldap to have secure connection by using openssl on Debian5. By the way, I got trouble during the below command. ldap:/etc/ldap# slapd -h 'ldap:// ldaps://' -d1 >>> slap_listener(ldaps://) connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 connection_read(15): unable to get TLS client DN, error=49 id=7 connection_get(15): got connid=7 connection_read(15): checking for input on id=7 ber_get_next ber_get_next on fd 15 failed errno=0 (Success) connection_closing: readying conn=7 sd=15 for close connection_close: conn=7 sd=15 Then I have search for "unable to get TLS client DN, error=49 id=7" but it seems no where has a good solution to this yet. Please help. Thanks # Well, I try to fix something to get it work but now I got this ldap:~# slapd -d 256 -f /etc/openldap/slapd.conf @(#) $OpenLDAP: slapd 2.4.11 (Nov 26 2009 09:17:06) $ root@SD6-Casa:/tmp/buildd/openldap-2.4.11/debian/build/servers/slapd could not stat config file "/etc/openldap/slapd.conf": No such file or directory (2) slapd stopped. connections_destroy: nothing to destroy. What should I do now? log : ldap:~# /etc/init.d/slapd start Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldaps:///' -g openldap -u openldap -f /etc/ldap/slapd.conf ldap:~# tail /var/log/messages Feb 8 16:53:27 ldap kernel: [ 123.582757] intel8x0_measure_ac97_clock: measured 57614 usecs Feb 8 16:53:27 ldap kernel: [ 123.582801] intel8x0: measured clock 172041 rejected Feb 8 16:53:27 ldap kernel: [ 123.582825] intel8x0: clocking to 48000 Feb 8 16:53:27 ldap kernel: [ 131.469687] Adding 240932k swap on /dev/hda5. Priority:-1 extents:1 across:240932k Feb 8 16:53:27 ldap kernel: [ 133.432131] EXT3 FS on hda1, internal journal Feb 8 16:53:27 ldap kernel: [ 135.478218] loop: module loaded Feb 8 16:53:27 ldap kernel: [ 141.348104] eth0: link up, 100Mbps, full-duplex Feb 8 16:53:27 ldap rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1705" x-info="http://www.rsyslog.com"] restart Feb 8 16:53:34 ldap kernel: [ 159.217171] NET: Registered protocol family 10 Feb 8 16:53:34 ldap kernel: [ 159.220083] lo: Disabled Privacy Extensions

  Read the article

• Graphics driver for ubuntu on dell latitude XT

  - by marc.riera

  we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine. since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x. But, we do not manage to enable the touchscreen, neither the vga graphic drivers. this is the output from lspci, if somebody cares. 00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 7930 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS7932 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc Device 7934 00:06.0 PCI bridge: ATI Technologies Inc RS7936 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc Device 7937 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Xpress 1250 03:01.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 03:01.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 03:01.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0b:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03) I've tryied to install ati drivers 9.3 , which I downloaded and installed, unpacked and installed, builded and installed, but nothing worked. Looks like the latests version is just accepted to work on jaunty 9.04, so they are kind of old. what else I can do? thanks. Marc Information added: lsusb and lspci -n |grep 01:05.0 sysop@wl083517:~$ lspci -n |grep 01:05.0 01:05.0 0300: 1002:7942 sysop@wl083517:~$ lsusb Bus 006 Device 002: ID 413c:8138 Dell Computer Corp. Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard EAP-SIM Port Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1b96:0001 N-Trig Duosense Transparent Electromagnetic Digitizer Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 03f0:1807 Hewlett-Packard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sysop@wl083517:~$

  Read the article

• T42 Thinkpad, USB boot, CF for programs and storage?

  - by Tom K.

  Is this feasible? I have a Thinkpad T40. I'd like to get one of the tiny USB drives (like the Verbatim Store 'n' Stay series) of sufficient size to handle basic Linux OS booting (8GB?), then put 16Gb or greater memory card (SD or CF) in the PCMCIA slot with appropriate adapter for additional application programs and data storage. I know I could get a used or refurb HD, but I've had reliability issues in the past. I don't believe that new IDE drives are available.

  Read the article

• What memory cards are compatible with my Canon Digital IXY 1000?

  - by Fantomas

  Would it be SDHC or SD? I would get 1 Terabyte if I could afford it. Please point me in the right direction. Thank you!

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >