Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 103/247 | < Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >

  • Ubuntu sound volume is 40% lower than in Windows

    - by ncomx
    I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

    Read the article

  • No monitor output after fresh install of 11.10 64-bit

    - by James
    I have a machine with a Nvidia 8600GT graphics card and a CRT monitor. Previously, I have only used Windows on it, and the graphics card seems to be working correctly in Windows 7. I booted up and installed Ubuntu 11.10 amd64 from the LiveCD and the whole process worked perfectly. When I tried to boot off the hard disk for the first time, the output to the monitor switched off during the splash screen, and this happens consistently. I can ctrl-alt-f2, so I tried an apt-get upgrade, which didn't help; nor did apt-get install nvidia-current. There is nothing that looks relevant in dmesg. Booting with the nomodeset option has no effect. Following the answers in this similar thread, I tried apt-get purge nvidia-173. Both startx and service lightdm start just say the service is already running. Does anyone know how to find out what the problem is? I was wondering if it is just that Ubuntu is trying to use a resolution that the monitor doesn't support, but I can't find out how to change that from the command line.

    Read the article

  • Laptop Display Not Working

    - by etrask
    Hello, I just purchased this laptop. It is working fine but I want to use Xubuntu on it. I managed to get 10.04 installed and running but it did not recognize/use the wireless card. So I want to try 10.10. However, every time I try, the screen goes black and never comes back on. I have tried the Live CD and Alternate install CDs, for both Ubuntu and Xubuntu 10.10. After I select "Install Ubuntu" or "Try Ubuntu", the screen blacks out and never displays anything. So I deleted "quiet" and "splash" off the command line to see what messages would come up. A bunch of text flies by but it ends at: [time] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [time] TCP bind hash table entries 65536 (order: 8, 1048576 bytes) [time] TCP: Hash tables configured (established 524288 bind 65536) [time] TCP reno registered [time] UDP hash table entries: 2048 (order: 4, 65536 bytes) [time] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [time] NET: Registered protocol family 1 And freezes here forever. I have tried nomodeset, vga=771, and xforcevesa with no progress. Is my video card simply not going to work with this distro? It seems strange that 10.04 would work fine but not 10.10. Any help is appreciated, thank you.

    Read the article

  • 12.10 no audio via hdmi and video speeds up

    - by jackson
    I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

    Read the article

  • can't get a good install:11.10 server

    - by jack
    I screwed up my partitioning aparently tring to get lvm and raid1 going. the machine is an intel dual core dt with 2 gig of ram and 2 sata drives, one 250g and the other 500g. This a build for my school in n.e. Thailand. we have 20+ clients now, a website, email. Our old server is dying fast and we are going to add another 12 stations next week. I really need some help here! 1. have onboard gigabit ethernet that aparently uses same driver as realtek 811c. I installed a pcie gigabit card also 811c. At several points the eth0 has accessed the internet fine, but the eth1 will not communicate. 2. I saw a "fix" for this online which from root: rmmod r8169. this imediately killed the working onboard card. 3.I tried to re-install 11.10 figuring that would re-install r8169. However I messed something up in my partitioning and can't get a clean boot now. 6. so I think after 12 re-installs or so and 2 days. I can get through it right if I can start over with clean drives, but I can't figure out how to empty them out what with soft raid and lvm partitions. seems like i've had it going well and then trying to fix that one little problem, i go backwards.Please help! please send email.-thanks

    Read the article

  • Wireless connected but internet not working, modem is fine because I'm typing over wifi on my android

    - by Sandro Livaja
    I can't connect to the Internet in 11.10. I tried switching my wifi card to another USB slot but nothing changed. Is it possible that the card is able to connect while not being able to receive packages? $ ifconfig eth0 Link encap:Ethernet HWaddr 40:61:86:35:11:b0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 74:ea:3a:8c:d5:5c inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::76ea:3aff:fe8c:d55c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1209 (1.2 KB) TX bytes:15329 (15.3 KB)

    Read the article

  • Error loading libGL.so.1

    - by jdp407
    When attempting to run various pieces of software (notably Steam and Yenka), I have come across an error similar to this: enter code here error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory I'm running a 64 bit system, with an NVidia Optimus card (I dual boot for certain windows only software that requires a dedicated graphics card). I have bumblebee installed, and I am using the nvidia-current driver, rather that one downloaded from NVidia, as recommended. The library (libGL.so.1) is not present in the top directory of /usr/lib, however it is present in /usr/lib32/nvidia-current, as a softlink to /usr/lib32/nvidia-current/libGL.so.304.64. A section of the output from ldconfig -p: libGL.so.1 (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/libGL.so libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so Obviously a library with that name is being loaded, but they are located in /usr/lib/x86_64-linux-gnu, however installed software doesn't seem to able to 'see' it. For Steam, running it with optirun causes it to work, but this is not the case for Yenka. I assume that optirun causes the library stored in /usr/lib32/nvidia-current to be used, which allows Steam to run, so I can't understant why Yenka won't run. Can anyone explain why software can't see the normal mesa library, and why Yenka refuses to run with the nvidia-current library?

    Read the article

  • Facebook Payments & Credits vs. Real-World & Charities

    - by Adam Tannon
    I am having a difficult time understanding Facebook's internal "e-commerce microcosm" and what it allows Facebook App developers to do (and what it restricts them from doing). Two use cases: I'm an e-com retailer selling clothes and coffee mugs (real-world goods) on my website; I want to write a Facebook App that allows Facebook users to buy my real-world goods from inside of Facebook using real money ($ USD) I'm highschool student trying to raise money for my senior class trip and want to build a Facebook App that allows Facebook users to donate to our class using real money ($ USD) Are these two scenarios possible? If not, why (what Facebook policies prohibit me from doing so)? If so, what APIs do I use: Payments or Credits? And how (specifically) would it work? Do Facebook Users have to first buy "credits" (which are mapped to $ USD values under the hood) and pay/donate with credits, or can they whip out their credit card and pay/donate right through my Facebook App? I think that last question really summarizes my confusion: can Facebook users enter their credit card info directly into Facebook Apps, or do you have to go through Payments/Credits APIs as a "middleman"?

    Read the article

  • 1080p Screen resolution problem after 10.04 to 12.04 update

    - by Ale
    I have a Samsung LCD 40" with a NVidia GeForce 6150SE nForce 430 Card. I recently upgraded from 10.04 to 12.04 and the best resolution I can get is 1360x768. I've tried the propietary drivers available on the repository kmod:nvidia_current kmod:nvidia_173_updates kmod:nvidia_current_updates kmod:nvidia_96 kmod:nvidia_96_updates kmod:nvidia_173 I've also downloaded latest from NVidia's Web, version: 295.40. But still no luck. With Nouveau driver, I can only get 1024x768. I know there is no problem with my hardware (video card, cable and monitor), I was using it perfectly on 10.04. Can anybody suggest something else I could try, to get my 1920x1080 resolution back? Thanks in advance. Here are some more information, that I got reading other similar posts on askubuntu. $ lspci | grep VGA 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) $ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1360 x 768, maximum 1360 x 768 default connected 1360x768 0 0 0mm x 0mm 1360x768 50.0 52.0* 1024x768 51.0 800x600 53.0 54.0 55.0 680x384 56.0 57.0 640x480 58.0 576x432 59.0 512x384 60.0 400x300 61.0 62.0 63.0 320x240 64.0

    Read the article

  • Problems when rendering code on Nvidia GPU

    - by 2am
    I am following OpenGL GLSL cookbook 4.0, I have rendered a tesselated quad, as you see in the screenshot below, and i am moving Y coordinate of every vertex using a time based sin function as given in the code in the book. This program, as you see on the text in the image, runs perfectly on built in Intel HD graphics of my processor, but i have Nvidia GT 555m graphics in my laptop, (which by the way has switchable graphics) when I run the program on the graphic card, the OpenGL shader compilation fails. It fails on following instruction.. pos.y = sin.waveAmp * sin(u); giving error Error C1105 : Cannot call a non-function I know this error is coming on the sin(u) function which you see in the instruction. I am not able to understand why? When i removed sin(u) from the code, the program ran fine on Nvidia card. Its running with sin(u) fine on Intel HD 3000 graphics. Also, if you notice the program is almost unusable with intel HD 3000 graphics, I am getting only 9FPS, which is not enough. Its too much load for intel HD 3000. So, sin(X) function is not defined in the OpenGL specification given by Nvidia drivers or something else??

    Read the article

  • Video freezes when larger than a certain size

    - by Poyan
    I have a weird problem playing video files. I have a fairly new (a few years old) graphic card that should and has played up to 1080p video files without much a lot of trouble. I seem to be having a weird issue where the video plays back fine if the window is below a certain size, but as soon as the windowsize increases, the picture freezes. The audio still plays. Usually this is mitigated by killing som applications. Especially GTK (?) apps seem to cause this lag, like having a Nautilus window open usually triggers this error for me. With hardware rendering I get the error regardless of application. I have tried enabling software rendering in VLC and that eliminates the problem (but I get other problems using software rendering, so I've avoided it). I know this is pretty fuzzy, but I'm not sure how to approach this problem. Do you have any idea? EDIT: Some more information. I have the correct and latest drivers installed. My graphics card is a Nvidia 7600 GT.

    Read the article

  • Triple-display setup using AMD drivers

    - by Halik
    I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

    Read the article

  • JavaOne Technology Conference Is Coming to Russia

    - by Tori Wieldt
    JavaOne Russia 17-18 AprilRussian Academy of Sciences, MoscowRegister Now JavaOne and Oracle Develop 2012 Russia offers a wide variety of sessions, hands-on labs, keynotes, demos, and the opportunity to network with developer peers. If you’re looking for in-depth sessions on Java technologies and tools, this is the conference for you. Your registration also gets you into Oracle Develop sessions as well, so you can learn about application servers, cloud development and, of course, database development. The JavaOne Russia tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #oracleRU

    Read the article

  • WiFi can't connect after suspend

    - by CyberOPS
    I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. After I installed Ubuntu 12.04.1 I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Basically here's what happens: I can see all the networks in my area. When I try to connect to one of them it never connects, it keeps disconnecting. After a little bit it asks for the password again but its already filled in correctly. If I hit okay it will do the exact same thing again. So does anyone know how I can get this fixed? INFO: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (*Not using Wubi*) Wireless Card Driver: iwlwifi UPDATE: I was about to reinstall with the DVD I made with the ISO from the official source but discovered the same issue happens on the disc's Ubuntu preview feature. I still was unable to fix it as before. I also tried the Xubuntu demo, and the same. Re installing the driver hasn't worked either.

    Read the article

  • 10.04 Window manager not working

    - by jackg
    Using an old mx200 128Mb AGP card. Log in ok. Sometimes the top and bottom bars do not appear, sometimes one sometimes both sometimes none. The menus on firefox/thunderbird and others disappear when I move the pointer from the menu heading to the menu itself. I can't play you tube videos, nor pacman, so the world has ended as I know it. If I type sudo metacity --replace in a terminal the window manager seems to work fine. But I don't know how to make this permanent. One option was: System menupreferencessessions In the sessions tab make sure that "automatically save changes to session" is checked. I don't have a sessions option in the preferences menu. So...? Must be a line of code in a terminal I can use to get round this. I have not upgraded to Ubuntu 11... because the graphics card is so old that I cannot get any decent screen resolutions when I do. On 10.04 I disable the Nvidia driver for the same reason and use 1024x768. Ta

    Read the article

  • Intermittent sound on an Medion Akoya S5610

    - by ej159
    The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

    Read the article

  • I can't hear any sounds on ubuntu 11.10 on Dell inspiron N5010

    - by Ahmed
    I have a problem that I can't hear any sounds and I don't know where to start. I did the following : lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at fbf00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at fbe40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel And It seems that I have 2 soundcards. Is that normal ?? I also did this: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Also on the sound setting GUI. I have 2 hardware profiles for sound cards but none of them works when I test the speakers. Where should I start searching ?

    Read the article

  • alsa - sound issues on ubuntu 12.04

    - by tam_ubuuser
    i am having an sony E series laptop.i have an HDMI port .at this stage ,i have tested my sound card , which provides audio out on my laptop i.e i could hear songs .my laptop has two sound cards amd 5450 and an intel-hda(alsamixer shows that as s/pdif) . i decided to connect HDMI output to my new HD-TV.but, i could get only visuals on my TV,NO AUDIO OUTPUT ( HDMI cable works fine with win 7).my laptop has two sound cards.but i couldn't switch output to other card.( i don't know ,how to do that) i decided to update alsa. complied the following code in terminal. sudo apt-add-repository ppa:ubuntu-audio-dev/alsa-daily sudo apt-get update sudo apt-get install alsa-hda-dkms then,strangely no login sound, and no audio output on my laptop at all .then, started complied code from step1 sound troubleshooting procedure from offical ubuntu site.then, my speaker icon taskbar disappeared .obivously $aplay -l ,provided output as no soundcards detected . so , i implemented step 4 from that guide, it provides a output of all hardware devices in my laptop. *-multimedia UNCLAIMED description: Audio device product: Cedar HDMI Audio [Radeon HD 5400/6300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:f0040000-f0043fff *-multimedia UNCLAIMED description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f5e00000-f5e03fff that command displayed output name of the two cards . but , still i have no positive output on $aplay -l. so therfore, i think alsa couldn't detect my sound cards . is there solution to this problem? it could be better,if alsa would channel output from multiple sound cards ? how should install and configure alsa such that detects HDMI cable as soon i connect to my HD tv? is it possible to alsa and pluseaudio 2.0 to co-exist, if so how?

    Read the article

  • Ubuntu 3D does not work on Dell system with a AMD Radeon HD 6470M

    - by VeeKay
    I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

    Read the article

  • Unable to make sound play in headset

    - by user50849
    Top right, I click the sound icon, select sound settings, and connect my USB-headset. I can them see the headset being detected as it pops up in the menu. I click it, and expect the currently played audio to get sent to the headset instead. My problem is that it does not. The audio keeps playing through the built-in speakers. More info: The icon for my built-in card in the sound settings is a circuit with a note symbol on top. The symbol for the headset is just black background with a "No" symbol on it. Might mean it doesn't work somehow. I installed pavucontrol, and notice that no second sound card shows up in there. When connecting, the syslog says Jun 20 09:38:46 yuna kernel: [40144.553431] usb 2-1.2: new full-speed USB device number 11 using ehci_hcd Jun 20 09:38:46 yuna kernel: [40144.650609] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input20 Jun 20 09:38:46 yuna kernel: [40144.650895] generic-usb 0003:0D8C:000C.000B: input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.0-1.2/input3 Jun 20 09:38:46 yuna mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" Jun 20 09:38:46 yuna mtp-probe: bus: 2, device: 11 was not an MTP device

    Read the article

  • Lost connectivity after configuring multiple network adapters on separate networks

    - by Dave Long
    I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

    Read the article

  • is wisdom of what happens 'behind scenes' (in compiler, external DLLs etc.) important?

    - by I_Question_Things_Deeply
    I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

    Read the article

  • design an extendible and pluggable business logic flow handler in php

    - by Broncha
    I am working on a project where I need to allow a pluggable way to inject business processes in the normal data flow. eg There is an ordering system. The standard flow of the application is A consumer orders an item. Pays for it and card is authorized. Admin captures the payment. Order is marked as complete and item is shipped. But this process may vary (extra steps in between) for different clients. Say a client would need to validate the location of the consumer before he is presented with a credit card form, OR his policies might require some other processes in between. I am thinking of using State Pattern for processing orders, saving the current state of the order in database, and initializing the state of order from the saved state. I would also need some mechanism, where a small plugin would be able to inject business specific states in the state machine. Am I thinking the right way? Are there already implemented patterns for this kind of situation? I am working with Codeigniter and basically this would mean for me, to redirect to proper controller according to the current state of the order. Like, if the state of the order is unconfirmed then redirect the user to details page and then change the state to pending. If some client would need to do some validation, then register an intermediate state between unconfirmed and pending Please suggest.

    Read the article

  • Having extreme issues getting Compiz working on Ubuntu 11.10 (32-bit)

    - by Josh Hornell
    I have been working very hard the past few days to try to get Compiz configured and working correctly but I have been running into a lot of issues. I first installed the CompizConfig Settings Manager and tried different features such as the desktop cube and couldn't get any of them to work. Then I read that I may not have the right graphics card drivers installed (Nvidia GT540m). So I went into the Additional Drivers tool and it shows that 'no proprietary drivers are in use on this system', which struck me as a bit odd as when I very first installed Ubuntu it showed that my Nvidia drivers were installed an active until I downloaded and installed the updates to Ubuntu and since then it's shown empty. I then tried to install my graphics card drivers manually via this article How do I install the latest Nvidia drivers via the Additional Drivers tool?. I rebooted and had no issue although I tried to go back into the CompizConfig Settings Manager and couldn't get anything to work as well as my Additional Drivers tool still showed no drivers installed. I feel like I've tried about everything I can think of and any help would be much appreciated!

    Read the article

  • How to fix Black screen?

    - by stupidwhiteguy
    so I recently had my question deleted and merged into a standard how to for blank screens. I am relatively new to This type of computer work and i don't understand the steps nessary to diagnose my problem well enough to solve it so this help full how to has me feeling helpless I can use Ctrl + Alt +F1 and log in So how do I use sudo commands to fix the blank screen on my old dell? sudo lsoci -nn tells me my video card is a ATI rage 128 pro ultra tf /var/log/Xorg.0.log tells me Permission denied that is all i get Sudo apt-get install --reinstall unity tried thay also have also tried Apt-get update and upgrade Please dont close this question without providing an actual answer or if you think it is an exact duplicate provide a solution that worked for that question. I see a lot of these questions as closed and there is no real answer given I will try any solutions available and report results so that others can also solve problems not be overwhelmed by overly broad troubleshooting guides that do nothing to help solve specific issues The nomodeset change from quiet splash also yields no results on reboot I still get a blank screen this screen still has contorl alt f1 abilities but that is it contorl alt f8 causes blinking cursor and F7 gets a crazy flash with green and blue then blank screen Contorl alt f1 a log in prompt in text only when run in recovery mode with failsafe graphics its says the syestem is running in low graphics mode your screen graphics card and input device settings could not be detected correctly. You will need to configure these your self how do i do that? I got this /var/log/failsafeX-backup-120909200641.tar as the location of my log files but i have no idea how to axcess sounds work in blank screen also screen responds or flashes after log in is typed and password entered really any help is good I don't even know where to start I believe 12.04 is installed and functioning but i don't think I can see it at the end of the error log it says error setting mtrr (base= oxf0000000, size= 0x01000000, type=1) inappropriate ioctl for device(25) i have tried to provide as much info as I understand how to provide

    Read the article

< Previous Page | 99 100 101 102 103 104 105 106 107 108 109 110  | Next Page >