Search Results

Search found 5405 results on 217 pages for 'minimal requirements'.

Page 105/217 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • Problems forwarding zone to another DNS server.

    - by sebastian nielsen
    I have a authorative DNS server at 83.248.21.18 which are authorative for the domain "finahemgoteborg.se". Now my registrar is requiring me to have 2 DNS servers for the domain, so I would now want the machine 85.228.103.141 just forward all incoming queries for "finahemgoteborg.se" to the 83.248.21.18 server. In the 85.228.103.141 BIND server, I have the following config: zone "finahemgoteborg.se" in { type forward; forwarders {83.248.21.18;}; }; But the problem is that 85.228.103.141 is still responding with "REFUSED" when querying it for example www.finahemgoteborg.se A record. How can I fix it. I do NOT want to set up a master/slave situation, just one nameserver that forwards to a another. Edit The Rest of named.conf: options { directory "/var/cache/bind"; version "none"; allow-recursion {"none";}; minimal-responses no; }; zone "sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns1sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "ns2sebn.us.to" in{ type master; file "/etc/bind/sebn.us.to"; }; zone "finahemgoteborg.se" in{ type forward; forwarders {83.248.21.18;}; };

    Read the article

  • Using off-the-shelf hardware for brand-name servers; Possible? Good idea?

    - by threecheeseopera
    Is it possible or advisable to use 'regular' not-sanctioned-by-the-server-manufacturer hardware in high end servers? Often these manufacturer-supplied parts have a very high price markup, and I wonder if it's always necessary (understanding that they probably apply more rigorous requirements to this hardware). For example, Dell sells 300GB 15,000rpm serial-attached scsi drives for a certain server family for almost $600 each, while newegg sells a drive with the same specs for almost half the price http://www.newegg.com/Product/Product.aspx?Item=N82E16822116059. Do we really need to pay these high markups, especially for disks that are likely RAID-ed and so guarded against catastrophic failure?

    Read the article

  • Jail Linux user to directory for FTP login

    - by Greg
    I'm planning on using vsftpd to act as a secure ftp server, but I am having difficulty controlling the linux users that will be used as ftp logins. The users are required to be "jailed" into a specific directory (and subdirectories) and have full read/write access. Requirements: - User account "admin_ftp" should be jailed to /var/www directory. - Other accounts will be added as needed, for each site... e.g: - User account "picturegallery_ftp" should be jailed to /var/www/picturegallery.com directory. I have tried the following, but to no avail: # Group to store all ftp accounts in. groupadd ftp_accounts # Group for single user, with the same name as the username. groupadd admin_ftp useradd -g admin_ftp -G ftp_accounts admin_ftp chgrp -R ftp_accounts /var/www chmod -R g+w /var/www When I log into FTP using account admin_ftp, I am given the error message: 500 OOPS: cannot change directory:/home/admin_ftp But didn't I specify the home directory? Extra internets for a guide how to do this specifically for vsftpd :)

    Read the article

  • How to read ebooks in continuous scrolling mode and save highlights?

    - by Peter Salazar
    I'm looking for a way to manage my academic workflow for reading e-books in .epub or .mobi formats on OSX. My requirements: - continuous scrolling mode - ability to highlight text (e.g. in yellow, using a single keyboard shortcut) - ideally, the ability to make annotations as well Amazon Kindle reader for OSX offers annotating, but not continuous scrolling mode. Calibre offers continuous scrolling mode, but does not allow highlighting or annotating. Is there a solution that will allow me to do this? I'm also open to workarounds, e.g. using Calibre to convert to HTML, then reading the book in a browser---but I would still need the ability to highlight using a single keystroke.

    Read the article

  • pip install very slow through virtual box

    - by AJP
    pip install --exists-action=w -r requirements.txt is very very slow through virtual box. Any suggests of how to diagnose and fix? Would seeing the VagrantFile be useful? VirtualBox 4.2.12 (can't upgrade to .14 as it doesn't work.) Vagrant 1.0.7 Host machine: ProductName: Mac OS X ProductVersion: 10.7.5 BuildVersion: 11G63b VagrantFile contains: Vagrant::Config.run do |config| config.vm.box = "precise64" config.vm.customize ["modifyvm", :id, "--memory", 2048] config.vm.box_url = "http://files.vagrantup.com/precise64.box" config.vm.network :hostonly, "33.33.33.21" config.vm.forward_port 5000, 5000 config.vm.forward_port 5555, 5555 config.vm.share_folder "v-root", "/vagrant", "./" Vagrant::Config.run do |config| config.vm.provision :shell, :inline => "VENV=/usr/local/venv bash /vagrant/setup_env.sh" end end Normal download speed is only about 5 times slower at 0.8 Mb per second versus 4 MB per second (as judged by curling a 50 Mb file from S3). But pip install is taking about 20 times longer from Mac (i.e. about 40 minutes) versus 2.

    Read the article

  • CentOS Vs Windows Server 2008

    - by Steve
    Hi, Apologies if the question appears ambiguous, I have little experience in this area and was after some informed opinions. I am deploying a test scenario of a server/client network and need to make some choices for Server. The client will be a Windows system as it meets the requirements for the client, the server choice has more room for selection. From my experience with Linux in general and the appealing nature of open source for low cost, security etc and the availability and performance of database and web server programs I have been considering CentOS as a server choice. I have the ability to make most of the choices of what software / server packages I wish to install. This includes Active Directory (something I have no experience with). How well does this operate with Windows clients? Am I being too selective and creating unnecessary complication by setting out not to use a Windows Server OS?

    Read the article

  • How to run Firefox jailed without serious performance loss?

    - by Vi
    My Firefox configuration is tricky: Firefox runs at separate restricted user account which cannot connect to main X server. Firefox uses Xvfb (virtual "headless" X server) as X server. x11vnc is running on that Xvfb. On the main X server there is vncviewer running that connect to this x11vnc On powerful laptop (Acer Extensa 5220) it seems to work more or less well, but on "Acer Aspire One" netbook it is slowish (on a background that firefox is loaded with lots of extensions). How to optimise this scheme? Requirements: Browser cannot connect to main X server. Browser should be in chroot jail (no "suid" scripts, readonly for many things) Browser should have a lot of features (like in AutoPager, NoScript, WoT, AdBlockPlus)

    Read the article

  • When did Apple stop using the name "Macintosh" in favor of "Mac", and does anyone know why?

    - by schnapple
    As of a few months ago I finally joined the ranks of Macintosh owners. Except "Macintosh" doesn't seem to exist anymore for some reason. I noticed everything was "Mac", i.e. Mac OS X, MacBook, Mac mini, Mac Pro, etc. I didn't pay a whole lot of attention, but I always thought everyone was using shorthand. I mean "MacBook" is the real name of the computer, as is "iMac", but I always thought when people said "Mac Pro" they were just shortening the real name, "Macintosh Pro". And yet now when you go to the Apple site, a search for "Macintosh" turns up several instances of the name being used on various things (system requirements for old versions of QuickTime, the occasional piece of software with "for the Macintosh" in the name) but nothing from the main Mac pages. Near as I can tell they're really no longer called "Macintoshes" they're just "Macs" When did this happen, and does anyone know why Apple ditched the term "Macintosh"?

    Read the article

  • Is it worth running nessus as well as OpenVAS?

    - by kdt
    Apparently OpenVAS originated as a fork of Nessus. It is very easy to install and use OpenVAS because it's, well, open. However, am I kidding myself if I just use that instead of Nessus? Should I be using both, or if I use Nessus then is OpenVAS surplus to requirements? To break it down into non-subjective sub-questions: * Is openvas a superset or subset of nessus? * Is one updated more often than the other? * Does one have a bigger vulnerability database than the other? * ...or are there other qualitative differences that I may be missing?

    Read the article

  • Installing a 3.5" hard drive in a 2.5" bay?

    - by Javawag
    I know this question seems ridiculous, but my server (actually a Mini-ITX computer) has a 2.5" hard drive bay and an empty CD-ROM bay underneath it. If I removed the hard drive bay, I could probably mount a 3.5" hard drive in the CD-ROM bay which is unused... I know it's a big of a kludgy way to do things but it does mean upgrading the hard drive to 2TB is much cheaper. My question is: are the power requirements of a 3.5" disk the same as 2.5" one? I know the connectors physically will still fit, but I don't want to destroy my server!

    Read the article

  • What are the frequencies of current in computers' external peripheral cables and internal buses?

    - by Tim
    From Wikipedia, three different cases of current frequency are discussed along with the types of cables that are suitable for them: An Extra Ordinary electrical cables suffice to carry low frequency AC, such as mains power, which reverses direction 100 to 120 times per second (cycling 50 to 60 times per second). However, they cannot be used to carry currents in the radio frequency range or higher, which reverse direction millions to billions of times per second, because the energy tends to radiate off the cable as radio waves, causing power losses. Radio frequency currents also tend to reflect from discontinuities in the cable such as connectors, and travel back down the cable toward the source. These reflections act as bottlenecks, preventing the power from reaching the destination. Transmission lines use specialized construction such as precise conductor dimensions and spacing, and impedance matching, to carry electromagnetic signals with minimal reflections and power losses. Types of transmission line include ladder line, coaxial cable, dielectric slabs, stripline, optical fiber, and waveguides. The higher the frequency, the shorter are the waves in a transmission medium. Transmission lines must be used when the frequency is high enough that the wavelength of the waves begins to approach the length of the cable used. To conduct energy at frequencies above the radio range, such as millimeter waves, infrared, and light, the waves become much smaller than the dimensions of the structures used to guide them, so transmission line techniques become inadequate and the methods of optics are used. I wonder what the frequencies are for the currents in computers' external peripheral cables, such as Ethernet cable, USB cable, and in computers' internal buses? Are the cables also made specially for the frequencies? Thanks!

    Read the article

  • Require a very simple bash-based webserver for logging XML POST [on hold]

    - by Syffys
    As in title, it's for testing purpose and I need it to be extremely light (1 line to 1 single light file). Here is a XML query sample: XML_QUERY=$(cat <<EOF <?xml version='1.0' encoding='UTF-8'?> <Test></Test> EOF ) curl -H "Content-type: text/xml; charset=utf-8" -H "Soapaction: \"\"" -k -d "${XML_QUERY}" http://localhost:8088 Here are some of the tracks I have found so far even if I wasnt able to adapt them to work as I expect: Netcat minimal webserver: Problem is that my nc does not have the -q option, so the connection is closing before delivering the XML content Netcat Only webserver: Same as above Thanks in advance! EDIT: As it's been asked, I'm running Linux Redhat, even if the distro does not really matter and the OS implied since I'm asking a bash-based solution... Also about my topic being on hold: "Instead, describe your situation and the specific problem you're trying to solve" = I though this was exactly what I was doing, but ok I'll reword: My situation: bash environment (which can also include some standard linux tool: netcat, python or whatever) My specific problem: please see title: Require a very simple bash-based webserver for logging XML in HTTP POST for testing purpose

    Read the article

  • Cisco 3560+ipservices -- IGMP snooping issue with TTL=1

    - by Jander
    I've got a C3560 with Enhanced (IPSERVICES) image, routing multicast between its VLANs with no external multicast router. It's serving a test environment where developers may generate multicast traffic on arbitrary addresses. Everything is working fine except when someone sends out multicast traffic with TTL=1, in which case the multicast packet suppression fails and the traffic is broadcast to all members of the VLAN. It looks to me like because the TTL is 1, the multicast routing subsystem doesn't see the packets, so it doesn't create a mroute table entry. If I send out packets with TTL=2 briefly, then switch to TTL=1 packets, they are filtered correctly until the mroute entry expires. My question: is there some trick to getting the switch to filter the TTL=1 packets, or am I out of luck? Below are the relevant parts of the config, with a representative VLAN interface. I can provide more info as needed. #show run ... ip routing ip multicast-routing distributed no ip igmp snooping report-suppression ! interface Vlan44 ip address 172.23.44.1 255.255.255.0 no ip proxy-arp ip pim passive ... #show ip igmp snooping vlan 44 Global IGMP Snooping configuration: ------------------------------------------- IGMP snooping : Enabled IGMPv3 snooping (minimal) : Enabled Report suppression : Disabled TCN solicit query : Disabled TCN flood query count : 2 Robustness variable : 2 Last member query count : 2 Last member query interval : 1000 Vlan 44: -------- IGMP snooping : Enabled IGMPv2 immediate leave : Disabled Multicast router learning mode : pim-dvmrp CGMP interoperability mode : IGMP_ONLY Robustness variable : 2 Last member query count : 2 Last member query interval : 1000

    Read the article

  • Recommendations for stable, reliable flash drives

    - by Josh Kelley
    We're looking to purchase some flash drives for use in some embedded devices. Most of our requirements aren't too different the generic "good, fast" flash drive: reliability is very important, speed is good, and so that the drive will fit, the case shouldn't be too large (so no OCZ Throttles). Consistency is also a major priority; we'd like to be able to buy more or less the same product a year or two from now without having to worry about the manufacturer swapping drive components with less reliable or slower parts. (We've been burned already by our previous manufacturer doing this.) Any recommendations, especially regarding consistency? I can read Ars Technica to get an overview of current models, but what are consistently good models?

    Read the article

  • Any InstallPad alternatives?

    - by ianfuture
    Hi, I'm about to install new bunch of software on a Windows XP Pro PC and found InstallPad as a potential method to do it all. However before using it I was wondering if there were any other similar apps that could be better or easier to use? Requirements (should haves more than must haves): - Free - Easy to use and configure - preferably from point and click in a GUI instead of command line params or config files - Robust - bug free or still in active/ongoing development - Some level of support or active community for help or tips - Pre-existing file lists that can be adapted for own use or used outright. Thanks in advance.. Ian

    Read the article

  • Distribute Windows (XP or 7) as virtual appliance

    - by User32
    I'm looking at ways that may be possible to distribute a Microsoft Windows (e.g. 7) virtual appliance (such as VMWare image) pre-configured and installed with a large application of mine. Is this possible? If not, is it perhaps best to ask clients to perform a virtual appliance installation on their site and then install my application via a script of some sort? For these kinds of scenarios I see that open source OSes are heavily used, but in my case I cannot use Linux or any other open source OS due to some requirements.

    Read the article

  • Redeploy using Active Directory

    - by Noam Gal
    I am trying to use group policy to deploy our msi through AD. For some strange reason, when I overwrite the msi with a newer version, and then go to the policy, and click on "Redeploy Application", the application gets uninstalled on the users' machines, and all reg keys, binaries and shortcuts are gone from them. The "Add/Remove Programs" still contain the application entry. I have managed to create a minimal vdproj that does nothing but write its current Product Version to a registry key, and created two versions of it (1.0.0 and 1.1.0). I still face the same problems when using this msi in my AD environment. I did check that my Package Codes and Product Codes are different for both versions, and that the Upgrade Codes are identical. I also checked the RemovePreviousVersion to true. Checking with some other msi (firefox 3.0.0 and 3.6.3) I downloaded from a site specifically for AD deploy, it worked just as expected (first installing the 3.0.0, then I over-written the msi, and clicked on "Redeploy", and the users got 3.6.3 after the next log-off-log-on). What am I missing here?

    Read the article

  • Dual-WAN router

    - by aix
    I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

    Read the article

  • Recommending simple appliance for DansGuardian, iptables, snort inline

    - by SRobertJames
    I'm currently using a Linksys E2000 with dd-wrt. I'd like to add DansGuardian for Content Filtering and snort-inline for IPS; but those require a more powerful box (mainly, more storage). Can you recommend a good device to use? I'm open to both overwrite-the-firmware (like dd-wrt) and designed-to-be-customized boxes. Requirements: 1. 5+ Ethernet ports, pref. GigE 2. small form factor 3. No noise (office environment) 4. low power 5. Not sure about 802.11 wireless Budget < $400, pref. less.

    Read the article

  • A home router for torrents, gaming, webbing and detailed QoS [closed]

    - by Cawas
    I want to plug in an external HD on it to torrent up never ending (mostly for seeding), with lowest priority. It should even automatically completely stop if it disturbs my net usage, and go back in later. And I want to be able to give gaming (or my computer) the highest priority, because of its ping requirements. It should be above even of Skype and any voip, which also have high priority. Web surfing and "youtubing" comes in the middle - it won't matter much if it delays a second or two. Finally, interface as simple as possible. It's fine if it's command line setup, but it needs to have a GUI. What are my options for routers / firmwares as described? Maybe Gargoyle? Or even Time Capsule? It seems to me good old DD-WRT isn't the best option out there anymore. I wonder what else could cover these grounds.

    Read the article

  • How to choose a web server for a Python application?

    - by Phil
    Information and prerequisites: I have a project which is, at its core, a basic CRUD application. It doesn't have long running background processes which it forks at the beginning and talks to later on, nor does it have long running queries or kept alive connection requirements. It receives a request, makes some queries to the database and then responds. In order to serve static files and cachable files fast, I am going to use Varnish in all cases. Here is my question: After reading about various Python web application servers, I have seen that they all have their "fans" for certain, usually "personal" reasons, which got me confused since each usecase differs from the next. How can I learn about the core differentiating factors of Python web servers (in order) to decide how suitable they are for my project and if one would be better than the other? What are your (technically provable) thoughts on the matter? How should I choose a Python web server? Thank you.

    Read the article

  • Looking for a good Web Server that is cheap

    - by SoLoGHoST
    I am a Project Manager, and former Lead Developer for a software portal system that requires a forum software to run. I am in need of a server that is cheap, reliable, and supports the latest PHP (5.2+), MySQL, unlimited e-mails (preferably), a cPanel, multiple sub-domains (atleast 3+). Currently I am paying $34.95 USD/month (approx. $420 USD/year). This is too high for me to pay to keep the site running. I just recently became Project Manager and in charge of Finances and I'm extremely concerned for the future of Dream Portal. With those prices I'm not sure I'll be able to keep it running for too long. Can someone please tell me of a good server that meets all of the requirements that I listed above that is cheaper on a yearly basis? Note: Currently on a Dedicated Server with limited disk space at 15000 MB (15 GB), monthly bandwidth = 500000 MB, 50 emails limit, 20 sub-domains limit, 30 FTP accts., and 25 SQL Databases.

    Read the article

  • How to configure a Linux kernel based on the modules currently in use?

    - by Carla
    Hello, I'm willing to build a minimal kernel with only the needed things for my machine; so I started by compiling the kernel from the ground up, using the default configuration and adding things that I know for sure I have (i.e.: Ethernet card, WiFi card, ...). But there are several other things not so easy to know about (i.e.: the watchdog timer) so I came across AutoKernConf which supposedly detects the hardware of the machine and generates a kernel configuration file with the settings for the found devices. The problem is it contained several settings repeated and even some which I don't have (I'm using a Dell laptop and one of the things it "found" was something of a Toshiba one). So I ended up building a kernel with the configuration that came out of the make allmodconfig command, which is a kernel with most of the things compiled as modules. Booting into that kernel and running lsmod I can see all of the kernel modules in use (the ones really needed) and I would like to know if there is a tool or some way for me to parse that list and convert it to the corresponding kernel configuration file. Or how to map each one with the appropriate options in the kernel so that I can manually set them. Thank you very much for your time.

    Read the article

  • Windows ACL inheritance issues for FTP server and automated tools

    - by Martin Sall
    I have set up Cerberus FTP server. By default, Cerberus FTP service runs under SYSTEM ACCOUNT. Also I have some console applications which run as scheduled tasks. They are running under a dedicated "Utilities" user account which has "Log on as batch job" permissions. These console applications take uploaded FTP files, process them and then move them to some dedicated archive folder. The problem is that my console apps are throwing Security exceptions when trying to acces the uploaded files. I tried to give the Full control permissions on the ftproot folder for my "Utilities" account and I have checked that "Replace all Child object permissions with inheritable permissions from this object" checkbox, but it affects only current files. When new files are uploaded, they again are not accessible by my "Utilities" account. I tried to go another way and put Cerberus FTP service under "Utilities" account. Then I also needed to give "Utilities" account permissions on Cerberus Data folder in ProgramData. Still no luck - after this operation, Cerberus internal SOAP web service stopped working (although everything else seems to work). I need that SOAP service to be available, so running the Cerberus FTP under "Utilities" account seems to be not an option. Unless I find out, what else do I need to set up for that "Utilities" account to stop Cerberus from complaining. I guess, Cerberus is uploading files to some temporary folder and so those files get the permissions form that folder and keep the same permissions even after moved to the ftproot. What would be the right solution for this which would grant Cerberus FTP server and the "Utilities" account minimal needed permissions to access the contents of the ftproot folder?

    Read the article

  • Quickly set up a Windows Server and automatically install and configure software

    - by Chris
    Yesterday I spent far too much time downloading and installing software on Windows Server 2008. I only had to install a simple server for SQL Server 2008 Express using Microsoft's Web Platform Installer, then configure it to enable remote connections. Everything had to be attended, wasting my time. On a Linux system, this would be trivial to automate, but this is Windows. I do this very rarely, but in the future I would like to make this take as little time as possible. I could do a disc image with everything I installed and configured, but is there a better way? I know nothing of advanced deployment techniques on Windows. Ideally I would like to be able to remotely re-install the OS, or have an unattended install (which I know is possible). Any tips to make the software I need easier to and install and configure with minimal interaction necessary would be helpful. I don't expect everything I asked for to be possible and easy to do. Basically, If any part of it can be done quicker or at least without user input, that's what I'm looking for.

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >